DIANN 2.8" ILI9341 SPI TFT LCD Display Touch Panel 320x240 TFT LCD Touch Screen Shield 5V/3.3V STM32 Display Module SPI Serial with Touch Pen
Asin: B0BNQBKFCT | Ean: 0687117701251 | UPC: 687117701251
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Compatible With Arduino R3 Controller Board,Which Will Improve Your Project Operations.
Spi Serial,Built-In Ili9341 Driver Ic And Power Supply Ic.
2.8” Ili9341 Spi Tft Lcd Display Designed With A Sd Card Socket On The Back.
With Touch Pen Inside, Support Touch Screen Function,More Easily To Use.
Features
- 2.8 ILI9341 SPI TFT LCD Display Touch Panel 320x240 Pixels RGB Colorful Display LCD Screen
- With Touch Pen Inside, Support Touch Screen Function,More Easily to Use
- Compatible with Arduino R3 Controller Board,Which Will Improve Your Project Operations
- 2.8 ILI9341 SPI TFT LCD Display Designed With a SD Card Socket On the Back
- SPI Serial,Built-in ILI9341 Driver IC and Power Supply IC
- See more on Amazon...
Brand: DIANN | Manufacturer: DIANN
Dimensions: 0.20 x 3.30 x 1.90 inches
See On Amazon Similar To DIANN 2.8 ILI9341 SPI TFT
#1
UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry Pi Pico
Asin: B072Q2X2LL | Model: U602602 | PartNumber: U602602
Embedded Driver Ic: Ssd1306. Communication: I2c/Iic Interface, Only Need Two I / O Ports.
No Embedded Fonts Inside The Oled Controller, User Can Create The Fonts Through The Font Generation Software. We Offer Technical Support And Software Library As Well As The Guide Book In The Package. Note: The Display Part Is 15Mm±0.5 Tall..
Need More Than 1 Pc? Please Refer To Asin: B08ky21sr2 (2Pcs).
Needn't Backlight, The Display Unit Can Self-Luminous. It Has Super High Contrast, Bright And Crisp Dots, Even Tiny Fonts Quite Readable.
Resolution: 128 X 64, View Angle: > 160°, Support Voltage: 3.3V-5V Dc, Power Consumption: 0.04W During Normal Operation, Full Screen Lit 0.08W.
Features
- UCTRONICS 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. It supports many chips: Arduino UNO and Mega, Raspberry pi, 51 MCU, STIM 32, etc., the UNO shown in the picture is NOT INCLUDE
- Resolution: 128 x 64, View angle: > 160 , Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable
- No embedded fonts inside the OLED controller, user can create the fonts through the font generation software. We offer technical support and software library as well as the guide book in the package. Note: the display part is 15mm 0.5 tall.
- Need more than 1 pc? Please refer to Asin: B08KY21SR2 (2pcs)
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 0.39 x 1.18 x 1.18 inches | Weight: 0.00 pounds
See On Amazon #2
SunFounder IIC I2C TWI 1602 Serial LCD Module Display Compatible with Arduino R3 Mega 2560 16x2
Asin: B019K5X53O | Model: TS0351 | PartNumber: TS0351 | Ean: 0701715367685 | UPC: 701715367685
With A Potentiometer Used To Adjust Backlight And Contrast..
Address Of The Module: Ox27..
Power Supply: +5V.
Support Iic Protocol. The I2c Lcd1602 Library Is Provided, So You Can Call It Directly..
Features
- Easy to use. Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line).
- Support IIC protocol. The I2C LCD1602 library is provided, so you can call it directly.
- With a potentiometer used to adjust backlight and contrast.
- Power supply: +5V
- Address of the module: ox27.
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.40 x 4.90 x 1.70 inches
Warranty: 1 Year Warranty
See On Amazon #3
ELEGOO UNO R3 2.8 Inches TFT Touch Screen with SD Card Socket with Technical Data for Arduino UNO R3 R4
Asin: B01EUVJYME | Model: EL-SM-004 | PartNumber: EL-SM-004 | Ean: 0746591610555 | UPC: 746591610555
With Touch Pen Inside, You Can Use It More Easily.
We Have Always Cared About The Customer Experience And Improve The Product Function Details.
Not Including The Uno R3 Controller Board And Usb Cable.
2. 8 Inches Colorful Display Lcd Screen.
Features
- Free tutorial in cd, better price, better service. (With technical data)
- 2. 8 inches colorful display lcd screen
- With touch pen inside, you can use it more easily
- Not including the uno R3 controller board and usb cable
- We have always cared about the customer experience and improve the product function details
- See more on Amazon...
First Available: 08/04/2017
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 0.79 x 3.15 x 2.17 inches | Weight: 0.08 pounds
See On Amazon #4
Teyleten Robot 1.28 Inch TFT LCD Display Module Round RGB 240 * 240 GC9A01 Driver 4 Wire SPI Interface 240x240 PCB for Arduino 3PCS
Asin: B0B7TFRNN1 | Ean: 9331632590470
Driving Voltage: 3-5V;Perspective: Ips Full Perspective.
Display Size: 32.4Mmx32.4Mm;Overall Dimensions:38Mmx45.5Mmx3.2Mm.
Operating Temperature:-20-70℃.
Interface Mode: Spi;Color: Full Color Rgb.
Features
- Size: 1.28";Resolution:240x240;Driver chip:GC9A01
- Interface mode: SPI;Color: full color RGB
- Driving voltage: 3-5V;Perspective: IPS full perspective
- Operating temperature:-20-70
- Display size: 32.4mmx32.4mm;Overall dimensions:38mmx45.5mmx3.2mm
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.79 x 1.77 x 1.38 inches
See On Amazon #5
Hosyond 4.0 Inches 480x320 TFT Touch Screen LCD Display Module SPI ST7796S Driver for Arduino R3/Mega2560
Asin: B0CKRJ81B5 | Ean: 0741421390416 | UPC: 741421390416
Eeasy To Expand The Experiment With Sd Card Slot And Touch Pen..
Provide A Rich Sample Program And Underlying Driver Technical Support..
Compatible With Arduino R3/Nano/Mega Controller Boards, Which Will Improve Your Project Operation..
Using The Spi Serial Bus, It Only Takes A Few Ios To Illuminate The Display..
Features
- 4.0-inch color screen,support 65K color display,display rich colors, 480X320 resolution, with touch function.
- Using the SPI serial bus, it only takes a few IOs to illuminate the display.
- Eeasy to expand the experiment with SD card slot and touch pen.
- Compatible with Arduino R3/Nano/Mega controller boards, which will improve your project operation.
- Provide a rich sample program and underlying driver technical support.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Weight: 0.22 Pounds
Warranty: Hosyond
See On Amazon #6
HiLetgo 1.44" Colorful SPI TFT LCD Display ST7735 128X128 Replace 5110/3310 LCD
Asin: B073R6SQRY | Model: 3-01-1435 | PartNumber: 3-01-1435
Communication Interface: Spi.
Driver: St7735.
Size: 1.44 Inch Spi Serial Bus.
Features
- Display Resolution: 128X128
- Size: 1.44 inch SPI serial bus
- Communication Interface: SPI
- Driver: ST7735
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #7
HiLetgo 3.5" TFT LCD Display ILI9486/ILI9488 480x320 36 Pins for Arduino Mega2560
Asin: B073R7Q8FF | Model: 3-01-1434 | PartNumber: 3-01-1434
Onborad Level Conversion Chip For 5V/3.3V Mcu.
Compatible With Arduino-Series Development Board. (Please Notice:This Screen Is Not Touch Screen).
Compatible With 3.3/5V Operation Voltage Level.
Support Arduino Mega2560 Directly Inserted.
Features
- 3.5" TFT LCD Display ILI9486/ILI9488 480x320 Suitable for MEGA2560
- Support Arduino Mega2560 Directly inserted
- OnBorad level conversion chip for 5V/3.3V MCU
- Compatible with 3.3/5V operation voltage level
- Compatible with Arduino-Series development Board. (Please notice:This Screen is not touch screen)
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #8
Hosyond 4.0 Inch 320x480 TN Capacitive Touch Screen LCD Display Module SPI Serial ST7796S Driver for Arduino R3/Mega2560
Asin: B0CRGQN58D | Ean: 0741421390539 | UPC: 741421390539
St7796s Driver. On Board Level Conversion Circuit, Compatible With 5V And 3.3V Mcu Adopting A 4-Wire Spi Serial Bus To Save I/O Pins..
Provide Rich Example Learning Programs (Esp32/Stm32/Arduino R3&Mage2560/C51/Ch32). Provide Low-Level Driver Technical Support, And Update Information Online.
Module Input Supports 2.54 Pin Interface And Fpc Extension Interface. Equipped With Micro Tf Card Slot For Easy Storage Expansion.
Newly Upgraded To A Capacitive Touch Panel. Compared With Resistive Screens, It Is More Convenient To Use And More Accurate To Touch.
Features
- 4.0 inches TN capacitive touch screen with 320x480 resolution of 65K colors and rich display colors. Brightness 300(cd/m2).
- Newly upgraded to a capacitive touch panel. Compared with resistive screens, it is more convenient to use and more accurate to touch
- ST7796S Driver. On board level conversion circuit, compatible with 5V and 3.3V MCU Adopting a 4-wire SPI serial bus to save I/O pins.
- Module input supports 2.54 pin interface and FPC extension interface. Equipped with micro TF card slot for easy storage expansion
- Provide rich example learning programs (ESP32/STM32/Arduino R3&Mage2560/C51/CH32). Provide low-level driver technical support, and update information online
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Dimensions: 0.58 x 4.25 x 2.39 Inches
See On Amazon #9
HiLetgo 1.8" inch ST7735R SPI 128 * 160 TFT LCD Display Module with PCB
Asin: B00LSG51MM | Model: 3-01-0181 | PartNumber: 3-01-0181 | Ean: 0702082654958 | UPC: 702082654958
Power Supply Ic And Sd Card Slot, Convenient To Uses.
Suitable For Beginners Of Lcd Color Display Module,Scm Learners And Lcd Enthusiasts.
Transparent Protective Film Covered On The Display Protect It From Damage.
Welded By Reflow Soldering, No Burrs, Comfortable And Safe.
Features
- Durable hard PCB board and metal, ideal for 1602 interface
- Welded by reflow soldering, no burrs, comfortable and safe
- Power supply IC and SD card slot, convenient to uses
- Transparent protective film covered on the display protect it from damage
- Suitable for beginners of LCD color display module,SCM learners and LCD enthusiasts
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #10
HiLetgo ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 with PCB 5V/3.3V STM32
Asin: B073R7BH1B | Model: 3-01-1433 | PartNumber: 3-01-1433
Viewing Direction: 6 O’Clock.
With Pcb Plate (Including Power Supply Ic, Sd), Compatible With 5110 Interface.
Pixel Arrangement: Rgb Vertical Stripe.
Resolution (Dots): 240Rgb*320Dots.
Features
- Driver element: a-Si TFT active matrix
- Resolution (dots): 240RGB*320Dots
- Viewing Direction: 6 o clock
- Pixel arrangement: RGB vertical stripe
- With PCB plate (including power supply IC, SD), compatible with 5110 interface
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #11
DIYmall Mini PiTFT 1.3" LCD Display 240x240 TFT Add-on for Raspberry Pi 3.3V SPI ST7789 3.3V SPI ST7789 Full Color(Pack of 2PCS)
Asin: B08F9XTKGK | Model: PiTFT | PartNumber: PiTFT
The Mini Pi Tft Comes With A Full Color 240X240 Pixel Ips Display With Great Visibility At All Angles..
The Tft Uses Only The Spi Port So Its Very Fast, And We Leave Plenty Of Pins Remaining Available For Buttons, Leds, Sensors, Etc. It's Also Nice And Compact So It Will Fit Into Any Case..
The Mini Pi Tft 1.3 " - 240X240 Color Tft Add-On For Raspberry Pi Is Your Little Tft Pal, Ready To Snap Onto Any And All Raspberry Pi , To Give You A Little Display..
Features
- TFT size 1.3" diagonal, Voltage 3.3V, Interface SPI, Driver: ST7789, Color Full color
- The Mini Pi TFT 1.3 - 240x240 Color TFT Add-on for Raspberry Pi is your little TFT pal, ready to snap onto any and all Raspberry Pi , to give you a little display.
- The Mini Pi TFT comes with a full color 240x240 pixel IPS display with great visibility at all angles.
- The TFT uses only the SPI port so its very fast, and we leave plenty of pins remaining available for buttons, LEDs, sensors, etc. It's also nice and compact so it will fit into any case.
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
Dimensions: 0.39 x 1.57 x 1.18 inches | Weight: 0.07 pounds
See On Amazon #12
HiLetgo 0.96" SSD1306 I2C IIC SPI Serial 128X64 OLED LCD Display 4 Pin Font Color Blue
Asin: B06XRBYJR8 | Model: 3-01-1234-IIC-B | PartNumber: 3-01-1234-IIC-B | Ean: 6919608793549
Font Color: Blue.
High Resolution: 128 * 64.
Panel Size: 26.70Mm X 19.26Mm X 1.85Mm.
Drive Duty: 1/64 Duty.
Features
- 0.96" SSD1306 128X64 OLED LCD Display with I2C IIC SPI Seria
- Drive Duty: 1/64 Duty
- Font Color: Blue
- Panel Size: 26.70mm x 19.26mm x 1.85mm
- High resolution: 128 * 64
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #13
HiLetgo 2pcs HD44780 IIC I2C1602 LCD Display with IIC I2C TWI SPI Serial Interface Adapter 1602 LCD Display Blue Backlight for Arduino
Asin: B07W5KC65S | Model: 3-01-1498 | PartNumber: 3-01-1498
Operate Voltage: 5V.
Blue Backlight Lcd Module.
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #14
Teyleten Robot 2.42 inch 128x64 OLED LCD Display Module SSD1309 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 - White Light
Asin: B09LND6QJ1 | Ean: 9339036069134
Spi Communication Or I2c Communication Can Be Switched By Configuring Three Resistors R3 R4 R5.
For Iic Communication, It Is Necessary To Move The Resistor On R4 To R3, And R5 Is Soldered With 0 Ohm Resistor..
Features
- Interface Selection: to choose SPI or IIC interface through R3, R4, R5
- For IIC communication, it is necessary to move the resistor on R4 to R3, and R5 is soldered with 0 ohm resistor.
- SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.39 x 2.80 x 1.71 inches
See On Amazon #15
DWEII 2.4" 2.42 inch 128x64 OLED LCD Display Module SSD1309 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 DIY Electronic - White Light
Asin: B0B2R57SCJ | Ean: 0701715516403 | UPC: 701715516403
❃❃This Is A 2.42 Inch Oled Display Module Of 128X64 Resolution In Which The Emissive Electroluminescent Layer Is A Film Of Organic Compound That Emits Light In Response To An Electric Current.
❃❃Driver Ic: Ssd1309.
❃❃Diagonal Screen Size: 2.42 Inch.
❃❃Spi Communication Or I2c Communication Can Be Switched By Configuring Three Resistors R3 R4 R5.
Features
- Interface Selection: to choose SPI or IIC interface through R3, R4, R5
- SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5
- This is a 2.42 inch OLED display module of 128x64 resolution in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current
- Diagonal Screen Size: 2.42 inch
- Driver IC: SSD1309
- See more on Amazon...
Brand: DWEII | Manufacturer: DWEII
See On Amazon #16
BIGTREETECH TFT35 SPI V2.1 Graphic Smart Display Compatible BTT Manta M8P/M4P/M5P, Manta E3EZ Control Board + CB1 Support Running Klipper Firmware DIY Upgrade 3D Printer
Asin: B0BSCQNF28 | Model: KINGPRINTER-1040000035 | PartNumber: KINGPRINTER-1040000035
3. It Is Connected With The Main Board Through Fpc Cable, Which Is Simple And Convenient To Operate;.
5. Currently, It Only Supports Bigtreetech Cb1. If You Use Cb1 V2.2, You Only Need To Use With Tft35 Spi V2.1; If You Use Cb1 V2.1, You Need To Use With Tft35 Spi V2.1+Io2can V1.0. If You Have Any Questions, You Can Contact Us At Any Time, And We Will Answer Your Questions..
4. Designed With Xh2.54 Terminal, Which Can Communicate With The Board Through The Terminal..
2. Each Motor Drive Shall Select Power Supply, Motor Power Supply Or Main Power Supply (Heating Rod Power Supply) Separately;.
Features
- 1. LCD display adopts SPI, touch adopts I2C communication mode, and shares the main control chip with the motherboard, which greatly reduces the cost of touch screen;
- 2. Each motor drive shall select power supply, motor power supply or main power supply (heating rod power supply) separately;
- 3. It is connected with the main board through FPC cable, which is simple and convenient to operate;
- 4. Designed with XH2.54 terminal, which can communicate with the board through the terminal.
- 5. Currently, it only supports BIGTREETECH CB1. If you use CB1 V2.2, you only need to use with TFT35 SPI V2.1; If you use CB1 V2.1, you need to use with TFT35 SPI V2.1+IO2CAN V1.0. If you have any questions, you can contact us at any time, and we will answer your questions.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #17
WWZMDiB TFT LCD Touch Display Module SPI Interface for Arduino (2.8", 320x240, ILI9341)
Asin: B0CCHXX1Z9 | Ean: 0705252404599 | UPC: 705252404599
⚡【Logic Io Port Voltage】：3.3V(Ttl).
💎【More Information】：Please Check The Dimensional And Parametric Drawings.
⚡【Module Interface】：4-Wire Spi Interface.
⚡【Vcc Supply Voltage】：3.3V~5V.
Features
- Touch Panel Type Resistive Touch Screens
- VCC Supply Voltage 3.3V~5V
- Logic IO Port Voltage 3.3V(TTL)
- Module Interface 4-wire SPI interface
- More information Please check the dimensional and parametric drawings
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #18
Hosyond 3.5 inch 480X320 TFT Touch Screen Module LCD Display Shield with SD Card Socket Compatible with Arduino R3 Mega2560
Asin: B0B5ML6R5L | Ean: 0782917535553 | UPC: 782917535553
8-Bit Parallel Bus, Faster Than Serial Spi Refresh.
On-Board 5V/3.3V Level Shifting Ic, Compatible With 5V/3.3V Operating Voltage.
Resistive Screen Supports For Touch Function And Easy To Expand The Experiment With Sd Card Slot.
480X320 Resolution, Clear Display；Support 16-Bit Rgb 65K Color Display, Display Rich Colors.
Features
- Supports development boards such as Arduino R3 and Mega2560 for plug-in use without wiring
- 480X320 resolution, clear display Support 16-bit RGB 65K color display, display rich colors
- 8-bit parallel bus, faster than serial SPI refresh
- Resistive screen supports for touch function and easy to expand the experiment with SD card slot
- On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating voltage
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Weight: 0.13 Pounds
Warranty: NO
See On Amazon #19
HiLetgo 0.91" IIC I2C Serial OLED LCD Display SSD1306 128x32 3.3V/5V AVR PIC for Arduino STM32
Asin: B01N0KIVUX | Model: 3-01-1259 | PartNumber: 3-01-1259
High Resolution Oled For Any Of Your Micro Controller Projects, 128X32 Pixels Gives You A Nice Sharp, Crisp Text Output..
The Display Can Run On 3.3V. It Is Legible, Even With 4 Lines Of Text. Highly Recommended For Projects That Require Some Form Of User Interface..
Use With Arduino, Esp8266, Esp32, Stm32, Etc. This Is A Really Good Way To Add A Very Compact Lcd To Your Project. No Need To Add Some Big Bulky Backlit Lcd..
The Display Performance Is Better Than The Traditional Lcd Display, It Uses The Very Common I2c Bus, And Runs On The Ssd1306 Display Driver..
Features
- OLED display, no need backlight, self-illumination, Display Color: White. Plz note: These I2C OLED Display Modules come without pin headers.
- The display performance is better than the traditional LCD display, it uses the very common I2C bus, and runs on the SSD1306 display driver.
- High resolution OLED for any of your micro controller projects, 128x32 pixels gives you a nice sharp, crisp text output.
- Use with Arduino, ESP8266, ESP32, STM32, etc. This is a really good way to add a very compact LCD to your project. No need to add some big bulky backlit LCD.
- The display can run on 3.3v. It is legible, even with 4 lines of text. Highly recommended for projects that require some form of user interface.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #20
waveshare 1.69inch LCD Display Module, 240 280 Resolution IPS Screen Display 262K Display Color ST7789V2 Driver chip SPI Interface, for Raspberry Pi, Arduino, STM32, etc.
Asin: B0C1ZTV84Z
Embedded St7789v2 Driver Chip, Ips Screen..
Comes With Online Development Resources (Examples For Raspberry Pi/Arduino/Stm32).
Operating Voltage: 3.3V/5V (Please Ensure That The Power Supply Voltage And Logic Voltage Are The Same, Otherwise It Will Not Work Properly.).
Spi Interface, Minimizes Required Io Pins, Supports Controller Boards Like Raspberry Pi/Arduino/Stm32..
Features
- 240 280 resolution, 262K colors, clear and colorful displaying effect
- SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32.
- Embedded ST7789V2 driver chip, IPS Screen.
- Operating voltage: 3.3V/5V (Please ensure that the power supply voltage and logic voltage are the same, otherwise it will not work properly.)
- Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
Dimensions: 0.19 x 1.53 x 1.22 inches
See On Amazon
Looking For Something Else?
Search