Peachtree Woodworking 4 inch EZ-Release Hose Clamp for Dust Collection Hoses 6PK
Asin: B0BVG92BD6 | Model: 12106 | PartNumber: 12106 | Ean: 0817918023362 | UPC: 817918023362
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Each Clamp Is Made From Steel So They Will Last. The Spring Action Allows The Clamp To Hold Your Hose In Place Without The Worry Of Slippage All The While Making Removal Of The Hose A Breeze. Simply Squeeze The Handles To Open/Loosen The Clamp And Remove Your Hose..
The 4” Clamp Opens Up To Approximately 4-7/8” Id When Fully Opened (Handles Squeezed Together And Touching). This Allows For Plenty Of Room To Clamp And Secure Most Any Standard 4” Dust Collection Hose..
The Handles Are Coated With A Firm Rubber Material For Easy Gripping And Squeezing When Needed. The Handles Are Also Slightly Oversized For A Comfortable Grip. These Clamps May Be Used For Other Purposes But Are Primarily Designed For Dust Collection Hose..
Made Specifically For Dust Collection Purposes, The Ez-Release Clamps Are Simple In Design But Big On Functionality. Adding Or Removing, Or Moving Your Hose To Different Dust Ports Is A Whole Lot Easier With The Ez-Release Clamp..
Features
- No more busting your knuckles or grabbing a screwdriver only to have it slip out of the groove. Just squeeze and release the clamp to engage. It s that simple!Building a dust collection system can be a tough task at times with all of the different fittings, hoses and other parts a pieces. Standard wire hose clamps and knuckle busting steel clamps just add to the frustration. Introducing the EZ-Release Hose Clamp for Dust Collection Hoses.
- Made specifically for dust collection purposes, the EZ-Release Clamps are simple in design but big on functionality. Adding or removing, or moving your hose to different dust ports is a whole lot easier with the EZ-Release Clamp.
- Each clamp is made from steel so they will last. The spring action allows the clamp to hold your hose in place without the worry of slippage all the while making removal of the hose a breeze. Simply squeeze the handles to open/loosen the clamp and remove your hose.
- The handles are coated with a firm rubber material for easy gripping and squeezing when needed. The handles are also slightly oversized for a comfortable grip. These clamps may be used for other purposes but are primarily designed for dust collection hose.
- The 4 clamp opens up to approximately 4-7/8 ID when fully opened (handles squeezed together and touching). This allows for plenty of room to clamp and secure most any standard 4 dust collection hose.
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: PEACHTREE WOODWORKING
See On Amazon Similar To Peachtree Woodworking 4 inch EZRelease
#1
Peachtree Woodworking Supply 22" Miter Extension Fence - PW1099
Asin: B000O2KNJ2 | Ean: 0810948011897 | UPC: 810948011897
Adjustable Aluminum Fence Increases The Face Of Your Miter Gauge Or Saw..
Stop Block With Knobs And Bolts Included..
Built In Extension Bar To Increase The Stop Capacity To 36"..
Works On The Left Side Or Right Side Of Your Saw..
Features
- Will improve work support close to the saw blade.
- Works on the left side or right side of your saw.
- Adjustable aluminum fence increases the face of your miter gauge or saw.
- Built in extension bar to increase the stop capacity to 36.
- Stop block with knobs and bolts included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking
See On Amazon #2
Peachtree Woodworking Supply Mounting Track Base Add On for the Tool Rest Sharpening Jig
Asin: B07VB9B2D3 | Ean: 0817918021610 | UPC: 817918021610
When You’Re Done With One Grit For Your Tool, Simply Loosen The Sharpening Jig Knob, Slide The Jig Out And Then Slide The Jig Back Into The Other Side! It Literally Takes Seconds To Switch From One Wheel To Another! This Makes The Tools Rest Sharpening Jig Even More Versatile Than It Already Is!.
If You Already Own The Jig, Then You Owe To Yourself To Get At Least One Mounting Track, If You Are Thinking About Purchasing The Tool Rest Sharpening Jig, Then We Encourage You To Consider Getting An Extra Mounting Track To Conveniently Work Both Wheels On Your Grinder. The Mounting Track Is Installed Using Four Wood Screws Which Are Included..
Made From The Exact Same Extruded Aluminum Material As The Original Mounting Track. The Mounting Track Not Only Allows Quick Switch Outs But It Also Allows You To Quickly Adjust The Jig Forward Or Backward Depending On What Type Of Tool You Are Sharpening..
Now, With An Extra Mounting Track Base You Can Have A Mounting Track For Each Of Your Two Wheels On Your Grinder! Once Both Mounting Tracks Have Been Installed, All You Have To Do Is Slide The Sharpening Jig Into One Side Or The Other And Start Sharpening!.
Features
- If you already own one of the Tool Rest Sharpening Jigs, then you know how versatile it is. Being able to accurately hone your tools can certainly be satisfying. Sometimes though it would be nice if we could have the ability to move the sharpening jig to the other side of the bench grinder to sharpen your tools with a different grit wheel.
- Now, with an extra Mounting Track Base you can have a mounting track for each of your two wheels on your grinder! Once both Mounting Tracks have been installed, all you have to do is slide the Sharpening Jig into one side or the other and start sharpening!
- When you re done with one grit for your tool, simply loosen the sharpening jig knob, slide the jig out and then slide the jig back into the other side! It literally takes seconds to switch from one wheel to another! This makes the Tools Rest Sharpening Jig even more versatile than it already is!
- Made from the exact same extruded aluminum material as the original Mounting Track. The Mounting Track not only allows quick switch outs but it also allows you to quickly adjust the jig forward or backward depending on what type of tool you are sharpening.
- If you already own the jig, then you owe to yourself to get at least one Mounting Track, if you are thinking about purchasing the Tool Rest Sharpening Jig, then we encourage you to consider getting an extra Mounting Track to conveniently work both wheels on your grinder. The Mounting Track is installed using four wood screws which are included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #3
Fulton EZ-Release Dual Hose Clamp (4" Clamp 2 Pack)
Asin: B071RGRNFY | Ean: 0814310019894 | UPC: 814310019894
Squeeze The Ez Release Dual Hose Clamp, Place Around Your Hose And Release.
Available In 2-1/2" Or 4" Sizes.
Each Pack Contains Two Ez-Release Hose Clamps.
Twice The Holding Power.
Features
- Create strong spring like pressure on the hose when released and with the dual loop
- Twice the holding power
- Squeeze the EZ Release Dual Hose Clamp, place around your hose and release
- Each pack contains two EZ-Release hose clamps
- Available in 2-1/2 or 4 sizes
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
See On Amazon #4
Fulton Woodworking Tools 4 inch x 50 foot Clear PVC Dust Collection Hose with 4 inch Steel EZ Release Hose Clamp 4 Pack
Asin: B0D1VRFGSQ | Model: QR-377 | PartNumber: QR-377 | Ean: 0817918024468 | UPC: 817918024468
The Hose Is Also Clear So You Can See Directly Inside To Spot Any Kind Of Obstruction..
The 4” Clamp Opens Up To Approximately 4-7/8” Id When Fully Opened (Handles Squeezed Together And Touching)..
Just Squeeze And Release The Clamp To Engage. It’S That Simple! Adding Or Removing, Or Moving Your Hose To Different Dust Ports Is A Whole Lot Easier With The Ez-Release Clamp..
Tight Bending Radius Allows You To Maneuver The Hose Anywhere In Your Shop. This Hose Will Not Collapse Under Pressure From Your Dust Collector.
Features
- Durable, flexible and sturdy PVC dust collection hose. This PVC hose is wrapped around a steel wire that can easily be grounded at each end
- Tight bending radius allows you to maneuver the hose anywhere in your shop. This hose will not collapse under pressure from your dust collector
- The hose is also clear so you can see directly inside to spot any kind of obstruction.
- Just squeeze and release the clamp to engage. It s that simple! Adding or removing, or moving your hose to different dust ports is a whole lot easier with the EZ-Release Clamp.
- The 4 clamp opens up to approximately 4-7/8 ID when fully opened (handles squeezed together and touching).
- See more on Amazon...
Brand: Fulton Woodworking Tools | Manufacturer: Fulton
See On Amazon #5
Dust Collection 4" to 1" Step Down Reducer By Peachtree Woodworking - PW433
Asin: B01N0HDV1E | Ean: 0810948013211, 0735090245078 | UPC: 810948013211, 735090245078
Sturdy Abs Plastic Construction.
Many Other Size Reducers & Splices Available, Each Sold Separately.
Features
- 4" to 1" Reducer
- Many other size reducers & splices available, each sold separately
- Sturdy ABS plastic construction
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: Peachtree Woodworking
See On Amazon #6
Peachtree Woodworking 4" DWV (drain,waste,vent) PVC Pipe to 4" Dust Collection Hose Plastic Adaptor
Asin: B00JJIBGSY | Ean: 0814310014011 | UPC: 814310014011
Pipe And Elbow Fitting Not Included.
Fittings Like Elbows, T's, Y's And Blast Gates.
Features
- Adaptor goes from PVC pipe to dust collection
- fittings like elbows, T's, Y's and blast gates
- Pipe and elbow fitting not included
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: Peachtree Woodworking
See On Amazon #7
Peachtree Woodworking Supply 4 ea. 4 inch Square 90 Positioning/Clamping Squares to Assemble Cabinets, Drawers or Boxes That Require A 90 Degree Corner
Asin: B07DFSCV7Y | Ean: 0817918021283 | UPC: 817918021283
Can Be Used On A Standard 90, A T-Joint, Outside 90 Degree, All Four Corners And More.
Made From High Impact Polycarbonate.
Embossed Graduation Marks On Both Sides Of Each Square.
It Can Be Clamped On The Inside Or Outside Corner Of Your Work Piece Making This A Very Versatile Clamping Square For Any Project. The Square 90 Is Secured To Your Stock Using Either An F-Clamp (Not Included) Or A C-Clamp (Not Included). Achieving 90 Degree Corners Just Became A Whole Lot Easier!.
Features
- The simple and easy to use Square 90 will become your third hand while assembling cabinets, drawers, boxes or any project that requires a 90 corner to be held in place while assembling. You can use the Square 90 in multiple situations where a 90 degree angle is needed. It can be used on a standard 90, a t-joint, outside 90 degree, all four corners and more! Made from high impact polycarbonate, the Square 90 is strong and durable enough for any project. It can be clamped on the inside or outside
- It can be clamped on the inside or outside corner of your work piece making this a very versatile Clamping Square for any project. The Square 90 is secured to your stock using either an F-Clamp (NOT INCLUDED) or a C-Clamp (NOT INCLUDED). Achieving 90 degree corners just became a whole lot easier!
- Can be used on a standard 90, a t-joint, outside 90 degree, all four corners and more
- Embossed graduation marks on both sides of each square
- Made from high impact polycarbonate
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #8
Peachtree Woodworking Supply 4 ea. 6 inch Square 90 Positioning/Clamping Squares to Assemble Cabinets, Drawers or Boxes That Require A 90 Degree Corner
Asin: B07DGLSXYQ | Ean: 0817918021290 | UPC: 817918021290
Can Be Used On A Standard 90, A T-Joint, Outside 90 Degree, All Four Corners And More.
Made From High Impact Polycarbonate.
Embossed Graduation Marks On Both Sides Of Each Square.
It Can Be Clamped On The Inside Or Outside Corner Of Your Work Piece Making This A Very Versatile Clamping Square For Any Project. The Square 90 Is Secured To Your Stock Using Either An F-Clamp (Not Included) Or A C-Clamp (Not Included). Achieving 90 Degree Corners Just Became A Whole Lot Easier!.
Features
- The simple and easy to use Square 90 will become your third hand while assembling cabinets, drawers, boxes or any project that requires a 90 corner to be held in place while assembling. You can use the Square 90 in multiple situations where a 90 degree angle is needed. It can be used on a standard 90, a t-joint, outside 90 degree, all four corners and more! Made from high impact polycarbonate, the Square 90 is strong and durable enough for any project. It can be clamped on the inside or outside
- It can be clamped on the inside or outside corner of your work piece making this a very versatile Clamping Square for any project. The Square 90 is secured to your stock using either an F-Clamp (NOT INCLUDED) or a C-Clamp (NOT INCLUDED). Achieving 90 degree corners just became a whole lot easier!
- Can be used on a standard 90, a t-joint, outside 90 degree, all four corners and more
- Embossed graduation marks on both sides of each square
- Made from high impact polycarbonate
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #9
Peachtree Woodworking Supply Cam Action T-Track Quick Release Hold Down Clamp for Jigs, Fixtures & Shop Fences (1, 1/4")
Asin: B07J2TTYVC | Ean: 0810948012153 | UPC: 810948012153
The Clamp Body Is Made Out Of Aluminum, Measures Approximately 1-1/2” Long And Each Clamp Has A Standard 3” Long Hex Head Bolt That Works With Most Standard Sizes Of T-Track (Depending On Which Size Cam Action Clamp You Purchase). Be Sure To Get The Correct Size For Your Needs. Typically That Means You Should Check To See What Size Slot Or Track You Would Like To Use The Clamps In..
For Instance, If You Have A Slot Requiring A T-Bolt, You Can Switch Out The ¼” Hex Head Bolt With A ¼” T-Bolt. Each Cam Can Exert Up To 400 Pounds Of Clamp Pressure Depending On How You Set It..
The Cam Action Clamps Are Available In ¼” 5/16” And 3/8” Hex Head Bolt Sizes. Another Nice Feature Of The Cam Action Clamps Is That You Can Swap The Bolts Out For Different Situations..
Our Exclusive Cam Clamps Will Solve Your Problem And Provide You With A Quick Release Clamping System For All Of Your Jigs, Fixtures And Some Fences That Rely On A Track System. Having A Cam Clamp On Your Router Table Fence Makes Is So Much Easier To Make Quick Adjustments And Quickly Lock The Fence In Place..
Features
- Finally, a quick release clamping system for jigs, fixtures and fences. Spending a lot of time tightening and loosening knobs on your jigs and fixtures? Or maybe your are constantly rotating knobs on your router table or drill press fences.
- Our exclusive cam clamps will solve your problem and provide you with a quick release clamping system for all of your jigs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place.
- The clamp body is made out of aluminum, measures approximately 1-1/2 long and each clamp has a standard 3 long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in.
- The Cam Action Clamps are available in 5/16 and 3/8 hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations.
- For instance, if you have a slot requiring a T-bolt, you can switch out the hex head bolt with a T-bolt. Each cam can exert up to 400 pounds of clamp pressure depending on how you set it.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon
Looking For Something Else?
Search