RATTMMOTOR 4-Axis Mach3 CNC Controller Kit, LAN5160T4 Stepper Motor Driver Ethernet with Electronic Handwheel MPG Pendant Emergency Stop Manual Pulse Generator for CNC Router/Lathe/Engraving Machine
Asin: B0BWXV5M2Y | Ean: 0754193412002 | UPC: 754193412002
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Lan5160t4 Function】Support Mach3 Control, And Computer Communication Using Ethernet Communication Method. Equipped With Hand Pulse Interface, Supports Serial Electronic Handwheel..
【Controller Interfaces】In Addition To The Red Power Indicator And Blue Link Indicator, The Controller Wiring Area Contains A Total Of Ethernet Interfaces, Mpg Hand Pulse Interfaces, Universal Input Interfaces, Emergency Stop Input Interfaces, Spindle Control Interfaces, Relay Control Interfaces, Power Supply Interfaces, Stepper Motor Interfaces And Other Interfaces..
【Lan5160t4 Performance Parameters ①】Maximum Output 300Khz Per Channel; 7 Common Digital Input Interfaces; 3 Common Digital Output Interfaces; 1 Pwm Spindle Speed Output; Support 4 Channels Stepper Motor Control, Single Channel Maximum 300Khz Control Pulse Output; Arm Main Control Chip..
【Lan5160t4 Performance Parameters ②】The Main Control Device Is 24V Powered, The Current Capacity Is Not Less Than 1A; Each Axis Driver Supports Up To 256 Subdivisions; Each Axis Driver Supports Up To 6A Current; The Quiescent Current, Running Current And Subdivisions Of The Driver Are Adjustable, The Adjustment Position Is In The Plug-In Page Of Mach3..
【Equipped With A 6-Axis Digital Handwheel】With X1/X2/X100 Triple Gear Ratio, Optional Emergency Stop Switch For Control Switch. The All-Plastic Housing Has High Insulation Strength, Which Can Realize 4 Axis (Or 6 Axis) Selection Switching. Metal Gear, Accutate Scale, High Precision And Good Texture..
【Lan5160t4 Cnc Control System】Lan5160t4 Cnc Control System Adopts Arm Design Architecture, Arm Complete Including Communication, Code Parsing, Underlying Algorithm And Control Pulse Generation Part. The Design Is Reasonable, The Control Is Reliable And The Operation Is Easy..
Features
- LAN5160T4 Controller Introduction The LAN5160T4 control board is a newly researched and developed all-in-one 4-axis drive control board with a control cycle of 2 ms per position and high control accuracy. The maximum single axis output pulse is 300KHz, the maximum subdivision is 256, the maximum current is 6A and the common stepper motors are supported.
- LAN5160T4 CNC control system LAN5160T4 CNC control system adopts ARM design architecture, ARM complete including communication, code parsing, underlying algorithm and control pulse generation part. The design is reasonable, the control is reliable and the operation is easy.
- LAN5160T4 function Support mach3 control, and computer communication using Ethernet communication method. Equipped with hand pulse interface, supports serial electronic handwheel.
- Equipped with a 6-axis digital handwheel With X1/X2/X100 triple gear ratio, optional emergency stop switch for control switch. the all-plastic housing has high insulation strength, which can realize 4 axis (or 6 axis) selection switching. Metal gear, accutate scale, high precision and good texture.
- LAN5160T4 performance parameters maximum output 300KHz per channel; 7 common digital input interfaces; 3 common digital output interfaces; 1 PWM spindle speed output; support 4 channels stepper motor control, single channel maximum 300KHz control pulse output; ARM main control chip.
- LAN5160T4 performance parameters The main control device is 24V powered, the current capacity is not less than 1A; each axis driver supports up to 256 subdivisions; each axis driver supports up to 6A current; the quiescent current, running current and subdivisions of the driver are adjustable, the adjustment position is in the plug-in page of mach3.
- Controller interfaces In addition to the red power indicator and blue link indicator, the controller wiring area contains a total of Ethernet interfaces, MPG hand pulse interfaces, universal input interfaces, emergency stop input interfaces, spindle control interfaces, relay control interfaces, power supply interfaces, stepper motor interfaces and other interfaces.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon Similar To RATTMMOTOR 4Axis Mach3 CNC Controller
#1
DIY CNC Controller Card, USB 4-Axis Linkage Mach3 Stepper Motor Motion Control Card, 100Khz Motion Controller Card Board for CNC Engraving
Asin: B07XH1ZPJN | Model: Wendry1pdn5v4zgq | PartNumber: Wendry1pdn5v4zgq | Ean: 0748904873558 | UPC: 748904873558
Support Emergency Input.
Support For Connecting Electronic Hand Wheel.
Support For Limit Switch.
Support Automatic Probe Tool.
Features
- Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor
- Support automatic probe tool
- Support emergency input
- Support for limit switch
- Support for connecting electronic hand wheel
- See more on Amazon...
Brand: Wendry | Manufacturer: Wendry
Dimensions: 1.18 x 7.09 x 5.91 inches
See On Amazon #2
CNCTOPBAOS 4 Axis USB Mach3 Controller Board,Blue 4-axis Linkage MACH3 Motion Control Card,CNC Stepper Motor Driver Controller Breakout Board 4-Inputs for CNC Router Milling Engraving Machine
Asin: B0CFF51GLD | Model: D-FDK-B | PartNumber: D-FDK-B
♞【Output Signal Ports】Have 0-10V Signal Output,You Can Use Mach3 Software To Control The Spindle Motor Speed; 4 General-Purpose Isolated Relay Drive Output Interface, Can Drive Four Relays For Controlling The Spindle Starts, Forward Rotating And Reverse Rotating, Pumps And Other Device;Support For Connecting Electronic Handwheel Mpg;.
♞【Applications】Cnc Router,Milling Machine,Engraving Machine,Carving Machines,Cutting Industry,Medical Equipment,Industrial Equipment And Automation Devices Etc..
♞【Input Signal Ports】4 General-Purpose Inputs, You Can Connect The Limit Switch, Estop Switch, Probe , Back To Zero And Other Device; Need Use External 24V Dc Power Supply To Isolate Usb And External Port, And To Make The System More Stable..
♞【4 Axis Linkage】Support For 4 Axis Linkage, You Can Connect Four Stepper Motor Drives Or Servo Drives; Maximum Step-Pulse Frequency Is 100Khz,Which Is Suitable For The Servo Or Stepping Motor;One Status Led, Indicate Connection Status On The Board..
Features
- 4 Axis USB Mach3 Control Board USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface.As long as Mach3 can run,the control card can be used; Support computer system:Windows XP/7/8/10.
- 4 Axis Linkage Support for 4 Axis linkage, you can connect four stepper motor drives or servo drives; Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;One status LED, indicate connection status on the board.
- Output Signal Ports Have 0-10V signal output,you can use mach3 software to control the spindle motor speed; 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device;Support for connecting electronic handwheel MPG;
- Input Signal Ports 4 general-purpose inputs, you can connect the limit switch, estop switch, probe , back to zero and other device; Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
- Applications CNC Router,Milling Machine,Engraving Machine,Carving Machines,Cutting industry,Medical equipment,industrial equipment and automation devices etc.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #3
RATTMMOTOR CM400 CNC Motion Controller RTCP Offline Standalone System Replaces Mach3, Support PC&Cellphone Control, Support Toolpath Display, CNC Motion Control Card 1000KHz 24VDC
Asin: B0CPY6NB5L | Ean: 0754193192867 | UPC: 754193192867
【Introduction To Control Systems With Rtcp Function】The Control System With Rtcp Function Is Designed With Configuration And Has A Strong Scalability. In Addition To Supporting Macro Programming And Customized Setting Of Nc Function Parameters, It Also Supports 18 Types Of Machine Structure Forms Of 3-Axis, 4-Axis And 5-Axis. It Also Has Powerful Toolpath Preview And Positioning Functions, Powerful And Stable Performance..
【Hardware Quick Connect And Pc Setup】①The Ethernet Port Of The Controller Is Connected Point-To-Point With The Computer Via An Ethernet Cable. ② 24V Dc Power Supply Is Connected To The 3P Power Terminal Of The Controller Card. ③ Computer Setup: Set The Ip Address Of The Connected Computer So That It Is In The Same Network Segment As The Ip Address Of The Controller Card (Default Is 192.168.1.100). Note: Set The Ip Address To 192.168.1.X (X Is 2-254, Except 100)..
【Customized Support Function】Support Customized G Code, Support Servo Spindle, Rigid Tapping. Support Customized Function Shortcut Keys, Universal Input Port Can Be Configured Shortcut Function Keys. Support User Deep Configuration Customization, Rapid Secondary Development Of Interface, Automatic Deployment Of Functional Components. Support Macro Program Customization..
【Cm400 Main Advantages①】Supports 3D Dynamic Machining Simulation Function. Tool Position And G-Code Can Realize Two-Way Positioning. 30,000 Lines Of Super Pre-Reading Processing Function, Support Path Forward Planning. Tiny Line Segment Wide Smooth Processing, Better Surface, Good Machining Surface And High Efficiency. Support Handwheel Guidance, All Movements Can Be Guided By Handwheel, Such As Zero Search, Tool Setting, Tool Magazine And So On. Supports The Expansion Of Disk, In-Line Tool Mag.
【Software Feature Pack Specifications】 5-Axis Tip-Following, Rtcp Tip-Following Control For Bevel Machining. Tool Magazine Customization, Support For Flying Scale Tool Magazine Customization Development.Cam Processing, Support For Cam Parameterized Processing Customization.Modbus Bus, Support For 485Modbus Absolute Value Servo Reading Customization Development. Macro Program Customization, Custom G Code, M Code And Custom Probing, Etc. Virtual Handwheel, Android, Hongmeng App..
【Cm400 Specifications】System Architecture: High Performance Processor + Fpga. Number Of Linked Axes: 4 Axis, Maximum 1Mhz Pulse Frequency. System Power Supply: 24V Dc. Drive Mode: Pulse + Direction, Double Pulse. Io: 12 Inputs, 8 Outputs. Spindle Interface: 1 Analog 0-10V, Multisection Speed, Pulse. Handwheel Interface: 5V, Ab Phase, 4 Axis Selection, 3 Speed Multiplier, 1 Emergency Stop Input. Network Interface: 100Mbps Ethernet*1..
Features
- CM400 Introduction CM400 motion control card, support 4-axis linkage interpolation, support one machine multi-card mode, users can use the extended G code to realize multi-card cooperative control. It is widely used in engraving machine, mold machine, machining center, precision engraving machine, automated assembly line equipment and other due fields.
- CM400 Specifications System architecture: high performance processor + FPGA. Number of linked axes: 4 axis, maximum 1MHz pulse frequency. System power supply: 24V DC. Drive mode: pulse + direction, double pulse. IO: 12 inputs, 8 outputs. Spindle interface: 1 analog 0-10V, multisection speed, pulse. Handwheel interface: 5V, AB phase, 4 axis selection, 3 speed multiplier, 1 emergency stop input. Network interface: 100Mbps EtherNet*1.
- Introduction to control systems with RTCP function The control system with RTCP function is designed with configuration and has a strong scalability. In addition to supporting macro programming and customized setting of NC function parameters, it also supports 18 types of machine structure forms of 3-axis, 4-axis and 5-axis. It also has powerful toolpath preview and positioning functions, powerful and stable performance.
- Software Feature Pack Specifications 5-axis tip-following, RTCP tip-following control for bevel machining. Tool magazine customization, support for flying scale tool magazine customization development.CAM processing, support for CAM parameterized processing customization.Modbus bus, support for 485modbus absolute value servo reading customization development. Macro program customization, custom G code, M code and custom probing, etc. Virtual handwheel, Android, Hongmeng APP.
- Customized support function Support customized G code, support servo spindle, rigid tapping. Support customized function shortcut keys, universal input port can be configured shortcut function keys. Support user deep configuration customization, rapid secondary development of interface, automatic deployment of functional components. Support macro program customization.
- CM400 main advantages Supports 3D dynamic machining simulation function. Tool position and G-code can realize two-way positioning. 30,000 lines of super pre-reading processing function, support path forward planning. Tiny line segment wide smooth processing, better surface, good machining surface and high efficiency. Support handwheel guidance, all movements can be guided by handwheel, such as zero search, tool setting, tool magazine and so on. Supports the expansion of disk, in-line tool mag
- Hardware Quick Connect and PC Setup The Ethernet port of the controller is connected point-to-point with the computer via an Ethernet cable. 24V DC power supply is connected to the 3P power terminal of the controller card. Computer Setup: Set the IP address of the connected computer so that it is in the same network segment as the IP address of the controller card (default is 192.168.1.100). Note: Set the IP address to 192.168.1.x (x is 2-254, except 100).
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #4
CNC Controller, 4 Axle Engraving Machine Controller Manual USB CNC Waterproof Controller for Mach3 Motion Control
Asin: B07WCN4LW1 | Model: Keensoqd3mnhzaci | PartNumber: Keensoqd3mnhzaci | Ean: 0745781112824 | UPC: 745781112824
【Multifunction Operation】If You Want To Find A Type Of Manual Cnc Controller With Multifunction, I Firmly Instroduce This One For You. It Is Integrated 21 Function Keys, Which Contains Mergency Stop, Cycle Start, Spindle On/Off And So On. In Addition, Each Button Has 12Mm, It Can Reduce Error Operation Or Interfere With The Adjacent Buttons.
【Waterproof Exterior Housing】To Guarantee A Safe, Reliable Operation, This Usb Cnc Controller Has Water-Resistant Exterior Housing. It Can Provide A Safe And Stable Working Condition, And Can Reduce Dirty Or Oil, Convenient And Reliable.
【Warranty】We Sincerely Thank You For Looking For Our Cnc System Controller. We Provide 100% Refund And Replacement For You If The Product Is Damaged In Delivery.
【Range Of Application】This Type Of Cnc Controller Is Especiall Designed For Mach3 System. If Your Equipment Is This Relevent Machine, Choose This One, Suitable For You.
Features
- Easy to Use Connected by USB port, this 4-axle engraving machine controller is easy to use. There is no need for you to install any software or drive, just connect the USB port. What's more, the cable has 3 meters, you can stretch within the scope of application, convenient and practicable
- Range of Application This type of CNC controller is especiall designed for Mach3 system. If your equipment is this relevent machine, choose this one, suitable for you
- Multifunction Operation If you want to find a type of manual CNC controller with multifunction, I firmly instroduce this one for you. It is integrated 21 function keys, which contains mergency stop, cycle start, spindle on/off and so on. In addition, each button has 12mm, it can reduce error operation or interfere with the adjacent buttons
- Warranty We sincerely thank you for looking for our CNC system controller. We provide 100% refund and replacement for you if the product is damaged in delivery
- Waterproof Exterior Housing To guarantee a safe, reliable operation, this USB CNC controller has water-resistant exterior housing. It can provide a safe and stable working condition, and can reduce dirty or oil, convenient and reliable
- See more on Amazon...
Brand: Keenso | Manufacturer: Keenso
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.57 Pounds
See On Amazon #5
CNCTOPBAOS 5 Axis Mach3 Motion Control Card,CNC Stepper Motor Driver Controller Board 15-32V DC,LPT Interface Breakout Board PWM 0-10V for CNC Router Engraving Carving Milling Machine
Asin: B07BFTRTBC | Model: 4V | PartNumber: 4V | Ean: 0785004502858 | UPC: 785004502858
♞【5 Input Signal Ports】Set To Limit, Origin, Knife, Start, Stop, Spindle Speed Input, Mpg Input Etc,Communicating With The Host Computer,Which Are Isolated By The Optical Coupling.Among The Optical Coupling Isolation, The P11and P12 Are High-Speed, Which Can Be Used For Connecting Main Shaft Encoder, Or The Same Demanding Signal As Hand Wheel A, B. 12V-Out And 5V-Out Power Output Interface Can Be Used To Pick Some Necessary Power, Such As The Hall Sensor Switch And The Proximity Switch..
♞【3 Relays】There Are 3 Relays, P2, P3 And P4, Which Can Support Mach3 Control Software Programming.The Relay's On Or Off Can Be Controlled Through The Control Of Mach3.The 3 Relays Can Be Used To Control The Opening And Closing Of The Liquid Coolant, Mist Coolant, Liquid State Coolant And So On. They Can Also Be Used To Control The Electromagnetic Valve Device Power Switch. P2 Port Is For The Spindle, P3 Port Is For The Cooling Liquid, P4 Port Can Be Defined..
♞【12 Output Signal Ports】There Are 12 Output Signal, Which Is Allowed To Controlling Output, Supporting As Many As 6 Axis Linkage. Some Of The Output Port Is Reusable Functinality. Meanwhile, One Port Only Can Be Used As One Function;The Circuit Can Output 0-10V Level To Control The Inverter Which Only Has Analog Speed Control In The Market..
♞【Stable Signal】This Control Card Uses A Dedicated High-Speed Chip To Process Input/Output (I/O) Signals, With Signal Correction And Amplification Functions, Making The Machine Work More Stable;The Computer Lpt Port Supplies The Power Individually, Separating From The Power Supply Of Other Parts,The Computer And Machine Tool Isolate Effectively.It Makes The Data More Secure,With Further Insurance Of Security And Stability;.
Features
- 5 Axis Mach3 Control Card This interface board can be connected with the cathode or total output to the stepper drive, or servo drive (servo driver must support the digital signal).The output is the 5V level; Wide input voltage power supply: 15-32V DC.
- Stable signal This control card uses a dedicated high-speed chip to process input/output (I/O) signals, with signal correction and amplification functions, making the machine work more stable;The computer LPT port supplies the power individually, separating from the power supply of other parts,the computer and machine tool isolate effectively.It makes the data more secure,with further insurance of security and stability;
- 5 Input Signal Ports Set to limit, origin, knife, start, stop, spindle speed input, MPG input etc,communicating with the host computer,which are isolated by the optical coupling.Among the optical coupling isolation, the P11and P12 are high-speed, which can be used for connecting main shaft encoder, or the same demanding signal as hand wheel A, B. 12V-OUT and 5V-OUT power output interface can be used to pick some necessary power, such as the hall sensor switch and the proximity switch.
- 12 Output Signal Ports There are 12 output signal, which is allowed to controlling output, supporting as many as 6 axis linkage. Some of the output port is reusable functinality. Meanwhile, one port only can be used as one function;The circuit can output 0-10V level to control the inverter which only has analog speed control in the market.
- 3 relays There are 3 relays, P2, P3 and P4, which can support Mach3 control software programming.The relay's on or off can be controlled through the control of Mach3.The 3 relays can be used to control the opening and closing of the liquid coolant, mist coolant, liquid state coolant and so on. They can also be used to control the electromagnetic valve device power switch. P2 port is for the spindle, P3 port is for the cooling liquid, P4 port can be defined.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #6
CNC Breakout Board, MACH3 4-Axis 6-Axis CNC Controller Motion Control Breakout Board Adapter, for CNC Engraving Machine, CNC Lathe, CNC Plasma Cutting Machine, 15-32VDC
Asin: B084GS1CDR | Model: Thincolrnodgbtmkq | PartNumber: Thincolrnodgbtmkq | Ean: 0738603747991 | UPC: 738603747991
★【5 Input 】There Are 5 Input , Communicating With The Host Computer, Which Are Isolated By The Optical Coupling. There Are 5 Input Ports, Set To Limit, Origin, Knife, Start, Stop, Spindle Speed Input, Mpg Input And Any Other One Of The 5 Functions..
★【3 Replays】There Are 3 Replays, P2, P3 And P4, Which Can Support Mach3 Control Software Programming. The Relay's On Or Off Can Be Controlled Through The Control Of Mach3 Software. Each Relay Has Attracted Indicating Lamp, Which Is More Intuitive And Convenient..
★【12 Output Signal】There Are 12 Output Signal, Which Is Allowed To Controlling Output, Supporting As Many As 6Axlslinkage. Some Of The Output Port Is Reusable Functionality. Meanwhile, One Port Only Can Be Used As One Function..
★ 【Safe & Stable】 The Computer Lpt Port Supplies The Power Individually, Separating From The Power Supply Of Other Parts. Therefore, The Computer And Machine Tool Isolate Effectively. It Makes The Data More Secure, With Further Insurance Of Security And Stability..
Features
- High Speed Chip A special high-speed chip is used to process the input and output (I / O) signal. It is capable of making the machine work stably, with the features of correcting and enlarging the that removing the unnecessary disturb .
- Safe & Stable The computer LPT port supplies the power Individually, separating from the power supply of other parts. THEREFORE, the computer and machine tool isolate effectively. It makes the data more secure, WITH FURTHER insurance of security and stability.
- 5 Input There are 5 input , communicating with the host computer, which are isolated by the optical coupling. There are 5 input ports, set to limit, origin, knife, start, stop, spindle speed input, MPG input and any other one of the 5 functions.
- 12 Output Signal There are 12 output signal, which is allowed to controlling output, supporting as many as 6axlslinkage. Some of the output port is reusable functionality. Meanwhile, one port only can be used as one function.
- 3 Replays There are 3 replays, P2, P3 and P4, which can support MACH3 control software programming. The relay's on or off can be controlled through the control of MACH3 software. Each relay has attracted indicating lamp, which is more intuitive and convenient.
- See more on Amazon...
Brand: Thincol | Manufacturer: Thincol
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #7
RATTMMOTOR 3-Axis Update GRBL 1.1f CNC Controller with Emergency and Limit Switch Fuction, CNC Router Engraver Machine GRBL Controller Board with Fan Cooling for CNC Wood Router Machine
Asin: B089SM3VNQ | Ean: 0619191853823 | UPC: 619191853823
【Emergency Stop Function】 Added An Emergency Stop Button, During The Engraving Process, If The User Encounters An Emergency And Needs To Stop The Engraving Immediately, User Can Press The Button To Stop The Operation..
【Power Switch Button Function】Added The Power Switch Button, Simple Operation, More Safety In The Process Of Using The Machine..
【X/Y/Z Axis Limit Switch Function】Added X/Y/Z Axis Limit Switch, When The Engraving Machine Moves Up And Down Or Left And Right, It Will Stop Immediately If It Exceeds The Forming Range..
【Mutiple Functions】Maximum Support For 20000Rpm Spindle, Support 0.5W-20W Module, Support Tool Setting(Probe) , Support Grbl Offline Controller. Equipped With Silent Fan, Good Cooling Effect..
Features
- Basic Parameters Connection:USB (USB-CH340), Input voltage:12-24VDC (recommend 24VDC), Power Interface:5.5-2.5mm DC interface, Control software:GRBL control/ Lasrrgrbl, Support system:Windows XP / Win 7 / Win 8 / Win 10 (32/64 )/ Linux. Support Stepper motor:12V, maximum current of 2A or less,is recommended within 1.5A and additional heat (any nema17 or nema23 stepper motor). Spindle PWM speed: Support,
- Mutiple Functions Maximum support for 20000RPM spindle, Support 0.5W-20W module, Support tool setting(probe) , Support GRBL offline controller. Equipped with silent fan, good cooling effect.
- Emergency Stop Function Added an emergency stop button, during the engraving process, if the user encounters an emergency and needs to stop the engraving immediately, user can press the button to stop the operation.
- X/Y/Z axis Limit Switch Function Added X/Y/Z axis limit switch, when the engraving machine moves up and down or left and right, it will stop immediately if it exceeds the forming range.
- Power Switch Button Function Added the power switch button, simple operation, more safety in the process of using the machine.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #8
USB MACH3 Motion Control Card Flying Card 4 Axis Motion Controller Card Board for CNC Engraving
Asin: B07PDYJBYX | Ean: 0724942587855 | UPC: 724942587855
【Four Interfaces】4 General-Purpose Inputs, You Can Connect The Limit Switch, Estop Switch, Probe Switch, Back To Zero And Other Device. 4 General-Purpose Isolated Relay Drive Output Interface, Can Drive Four Relays For Controlling The Spindle Starts, Forward Rotating And Reverse Rotating, Pumps And Other Device..
【Warm Tips】 Our Product Is Tested To Ensure Trouble- Installation And Performance, Please Rest Assured To Buy..
【Led Display】Status Led, Indicate Connection Status On The Board. Make Your Work Status Clear At A Glance..
【Maximum Frequency】Maximum Step-Pulse Frequency Is 100Khz, Which Is Suitable For The Servo Or Stepping Motor. Need Use External 24V Dc Power Supply To Isolate Usb And External Port, And To Make The System More Stable..
Features
- Powerful Compatibility Support for 4-axis linkage, you can connect four stepper motor drives or servo drives. Support automatic probe tool. Support emergency input. Support for limit switch. Support for connecting electronic hand wheel.
- Maximum Frequency Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
- Four Interfaces 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device.
- LED Display Status LED, indicate connection status on the board. Make your work status clear at a glance.
- Warm Tips Our product is tested to ensure trouble- installation and performance, please rest assured to buy.
- See more on Amazon...
Brand: Keenso | Manufacturer: Keenso
Dimensions: 1.18 x 7.09 x 5.91 inches | Weight: 0.31 Pounds
See On Amazon #9
CNCTOPBAOS 4 Axis USB Mach3 Motion Control Card,Red 4-Axis Linkage MACH3 CNC Controller Board,Stepper Motor Driver Control Card 100KHz 4 Inputs Breakout Board for CNC Router Engraving Machine
Asin: B0CFF4YRBN | Model: D-FDK-R | PartNumber: D-FDK-R
♞【Output Signal Ports】Have 0-10V Signal Output,You Can Use Mach3 Software To Control The Spindle Motor Speed; 4 General-Purpose Isolated Relay Drive Output Interface, Can Drive Four Relays For Controlling The Spindle Starts, Forward Rotating And Reverse Rotating, Pumps And Other Device;Support For Connecting Electronic Handwheel;Handwheel Interface: 2*5P Row Needle..
♞【Applications】Cnc Router,Milling Machine,Engraving Machine,Carving Machines,Cutting Industry,Medical Equipment,Industrial Equipment And Automation Devices Etc..
♞【Input Signal Ports】4 General-Purpose Inputs, You Can Connect The Limit Switch, Estop Switch, Probe , Back To Zero And Other Device; Need Use External 24V Dc Power Supply To Isolate Usb And External Port, And To Make The System More Stable..
♞【4 Axis Linkage】Support For 4 Axis Linkage, You Can Connect Four Stepper Motor Drives Or Servo Drives; Maximum Step-Pulse Frequency Is 100Khz,Which Is Suitable For The Servo Or Stepping Motor;One Status Led, Indicate Connection Status On The Board..
Features
- 4 Axis USB Mach3 Control Board USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface.As long as Mach3 can run,the control card can be used; Support computer system:Windows XP/7/8.
- 4 Axis Linkage Support for 4 Axis linkage, you can connect four stepper motor drives or servo drives; Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;One status LED, indicate connection status on the board.
- Output Signal Ports Have 0-10V signal output,you can use mach3 software to control the spindle motor speed; 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device;Support for connecting electronic handwheel;Handwheel interface: 2*5P row needle.
- Input Signal Ports 4 general-purpose inputs, you can connect the limit switch, estop switch, probe , back to zero and other device; Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
- Applications CNC Router,Milling Machine,Engraving Machine,Carving Machines,Cutting industry,Medical equipment,industrial equipment and automation devices etc.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #10
MACH3 USB Interface CNC Motion Control Card Board Controller with Strong Anti-Interference Ability
Asin: B07Y683W98 | Model: Garosaxrzekv9m0q | PartNumber: Garosaxrzekv9m0q | Ean: 0719233184875 | UPC: 719233184875
Support: It Is Able To Support Various Versions Of Mach3 Software, Support For The Latest Version. The Professional Design Makes It Super Easy For Installation,You Are Worth Trying..
Compatibility: Compatible For Windows Xp, For Win7, For Win8, For Win10, Support For 64-Bit Systems, Support For Laptops, Support For Tablets.We Strive To Provide You With The Highest Quality Product And The Best Customer Experience, If You're Not Entirely Satisfied, Please Just Feel To Contact Us At Any Time..
Security: All The Input Isolation By The Light Lotus, Can Be Accessed By Emergency Stop, The Knife, Limit, Back To Zero, Etc., To Ensure Computer Security.Hyuduo Is Committed To Providing Customers With High-Quality Products And Thoughtful Service..
Output: The Interface Board Can Output 0~10V Analog , And Can Also Be Configured As 0~5V Output.It Looks Good, Will Make You Fell More Comfortable And Well, And Our Item Can Give You A Good Visual Experience And Best Product Experience ..
Features
- ANTI-INTERFERENCE:The frequency converter interface (AVI+, AVI-) is isolated from the computer and the main control circuit, strong anti-interference ability. rugged ,strong and , this item really not easy to be damaged or defective, and can be used for a long time without worry.
- OUTPUT: The interface board can output 0~10V analog , and can also be configured as 0~5V output.it looks good, will make you fell more comfortable and well, and our item can give you a good visual experience and best product experience .
- SUPPORT: It is able to support various versions of MACH3 software, support for the latest version. The professional design makes it super easy for installation,you are worth trying.
- SECURITY: All the input isolation by the light lotus, can be accessed by emergency stop, the knife, limit, back to zero, etc., to ensure computer security.Hyuduo is committed to providing customers with high-quality products and thoughtful service.
- COMPATIBILITY: Compatible for Windows XP, for WIN7, for WIN8, for WIN10, support for 64-bit systems, support for laptops, support for tablets.We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel to contact us at any time.
- See more on Amazon...
Brand: Garosa | Manufacturer: Garosa
Dimensions: 1.97 x 2.76 x 1.97 inches | Weight: 0.33 Pounds
See On Amazon
Looking For Something Else?
Search