AITRIP 20pcs TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions (20pcs TP4056 Type-c USB)
Asin: B0C2VD3ZW3 | Ean: 0687117710338 | UPC: 687117710338
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Battery Overcharge Lifting Voltage: 4.00 V.
Charging Cut-Off Voltage: 4.2V ± 1%.
Battery: Over-Current Protection Current 3 A.
Maximum Charging Current Output: 1000Ma.
Features
- Input interface: Type-c USB
- Maximum charging current output: 1000mA
- Battery overcharge lifting voltage: 4.00 V
- Battery: over-current protection current 3 A
- Charging cut-off voltage: 4.2V 1%
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon Similar To AITRIP 20pcs TP4056 Typec USB
#1
diymore 5pcs TP4056 Type-C USB 5V 1A Battery Charger Module Charging Board with Dual Protection Functions
Asin: B07MDPLQ18 | Model: X521365 | PartNumber: X521365 | Ean: 0680727634162 | UPC: 680727634162
Battery: Over-Current Protection Current 3 A.
Light State: No Load The Light Not Bright, Red Light For Recharging, Is Full Of Blue Light..
Maximum Charging Current Output: 1000 Ma.
Battery Overcharge Lifting Voltage: 4.00 V.
Features
- Input interface: Type-C USB.
- Battery overcharge lifting voltage: 4.00 V
- Battery: over-current protection current 3 A
- Maximum charging current output: 1000 ma
- Light state: no load the light not bright, red light for recharging, is full of blue light.
- See more on Amazon...
Brand: diymore | Manufacturer: diymore
See On Amazon #2
Battery Charger Module USB TP4056 3.7V 4.2V to 9V 5V 2A Charge Discharge Integrated Step Up Module,18650 Lithium Li-ion Battery Charger Module(6 PCS)
Asin: B098989NRZ | Ean: 8414825638416
Instructions For Use: Tp4056 Charger Module Can Be Used For Multimeter To Convert To Charge Lithium Batteries. Vin+ Port Input 5V Solar Panel, Bat+ Port Can Output 4.2V To Charger 3.7V 18650 Battery..
Package Contains: 6 * Lithium Li-Ion Battery Charger Module.
Small And Delicate: 1.3In*0.92In/33Mm*23Mm.
Features: Battery Charger Module Combines The Tp4056 Battery Charger With A Boost Circuit. Adds A Battery And Converts A Low Power Dc Device To A Usb Rechargeable Device..
Features
- Material: Battery charger module made of electronic components.Can be used for multimeter, converted to lithium battery charging.
- Features: Battery charger module combines the TP4056 battery charger with a boost circuit. Adds a battery and converts a low power DC device to a USB rechargeable device.
- Instructions for use: TP4056 Charger Module can be used for multimeter to convert to charge lithium batteries. VIN+ port input 5V solar panel, BAT+ port can output 4.2V to charger 3.7V 18650 battery.
- Small and delicate: 1.3in*0.92in/33mm*23mm
- Package contains: 6 * Lithium Li-ion Battery Charger Module
- See more on Amazon...
Brand: ABSOK | Manufacturer: LESEXS
Weight: 0.04 pounds
See On Amazon #3
AEDIKO 20pcs TP4056 Type-C USB 5V 1A 18650 Lithium Battery Charger Module Li-ion Charging Board TC4056A with Dual Protection Function
Asin: B0BG6WP8XC | Ean: 0687117700865 | UPC: 687117700865
Two-In-One Charging And Discharging Protection Function.
Light State:No Load The Light Not Bright, Red Light For Recharging,Green Light Is Full Charger.
The Module Come With Solder Joints For Input Voltage Wiring,Which Is Convenient For Diy.
Input Voltage: 4.35-6V (Recommended Voltage 5V).
Features
- Input Interface: Type-C USB
- Input Voltage: 4.35-6V (Recommended Voltage 5V)
- Two-in-One Charging and Discharging Protection Function
- The Module Come With Solder Joints for Input Voltage Wiring,Which is Convenient for DIY
- Light State:NO Load the Light NOT Bright, Red Light for Recharging,Green Light is FULL Charger
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
Dimensions: 0.20 x 1.02 x 0.65 inches
Warranty: 2M
See On Amazon #4
MakerFocus 10pcs 186 50 Lithium Battery Charging Module TP4056 Charging Module 1A with Battery Protection 186 50 BMS and 2A 5V Charge Discharge Module Charging Boost Mobile Power Protection PCB Board
Asin: B08QD3W677 | Model: SGn37i fggw | PartNumber: SGn37i fggw
2A 5V Charge Discharge Integrated Module - Mcu Users, If You Accept A Small Load Key Can Be Connected To The Microcontroller About 20S To Provide A Low Level Allows The Module To Continue Working. Trigger Mode: Low Level Trigger (Ground) . 4 In 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium Battery Protection Function: Over-Current, Overvoltage, Over-Temperature, Short Circuit Protection..
If The Load Is Less Than 50Ma, The Output Will Be Automatically Turned Off After 30 Seconds; If The Load Is Greater Than 50Ma, The Output Will Be Automatically Turned On. Allow Discharge While Charging. (Note: At This Time Output Voltage 4.7 / 5V)..
2A 5V Charge Discharge Integrated Module - In Discharge Mode (The Charging Mode Key Function Is Invalid), Trigger The Key Port Once To Open The Output; Continuously Trigger The Key Port Twice To Close The Output. The First Time The Load Is Connected, The Output Is Automatically Turned On..
Tp4056 Charging Module - Input Voltage: 5V; Battery Over-Discharge Protection Voltage: 2.5V; Batteryovercurrent Protection Current: 3A; Connect The Battery To The B+ B-, Inserted Into The Usb Female Mobilephone Charger, The Red Light Is Being Charged, The Green Light To Full. The Charge Should Disconnect The Load Out Terminal On The Positive And Negative Can Not Be Wrong, Please According To Specifications, Otherwise It Will Damage Directly..
Features
- TP4056 Charging Module - Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery, And still retains the input voltage wiring pads, can be very convenient DIY. Charging cut-off voltage: 4.2V 1%; Maximum charge current: 1000mA.
- TP4056 Charging Module - Input voltage: 5V; Battery over-discharge protection voltage: 2.5V; Batteryovercurrent protection current: 3A; Connect the battery to the B+ B-, inserted into the USB female mobilephone charger, the red light is being charged, the green light to full. The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly.
- 2A 5V Charge Discharge Integrated Module - MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground) . 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection.
- 2A 5V Charge Discharge Integrated Module - In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output. The first time the load is connected, the output is automatically turned on.
- If the load is less than 50MA, the output will be automatically turned off after 30 seconds; if the load is greater than 50MA, the output will be automatically turned on. Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V).
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 2.00 x 2.70 x 0.90 inches
Warranty: No Warranty
See On Amazon #5
AEDIKO 20pcs TP4056 Micro USB 5V 1A 18650 Lithium Battery Charger Module Li-ion Charging Board with Dual Protection Function
Asin: B097HGR2YS | Ean: 0701715480964 | UPC: 701715480964
Protection:Overcharge Over Discharge And Over-Current Protection.
Application:This Module Is Used For Single-Cell Lithium Battery Or Multi-Cell Parallel Lithium Battery Charging, The Ammeter For Testing Current Can Only Be Connected In Series To The 5V Input Of The Charging Board.
Light State:No Load The Light Not Bright, Red Light For Recharging,Green Light Is Full Charge.
Input Voltage: 4.5V-5.5V (Recommended Voltage 5V).
Features
- Input Interface: Micro USB
- Input Voltage: 4.5V-5.5V (Recommended Voltage 5V)
- Protection:Overcharge Over Discharge and Over-current Protection
- Light State:NO Load the Light NOT Bright, Red Light for Recharging,Green Light is FULL Charge
- Application:This Module is Used for Single-Cell Lithium Battery or Multi-Cell Parallel Lithium Battery Charging, the Ammeter for Testing Current Can Only be Connected in Series to the 5V Input of the Charging Board
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.01 pounds
Warranty: no
See On Amazon #6
5pcs Micro/Type-c USB 5V 1A 18650 TP4056 Lithium Battery Charger Module,TP4056 Micro
Asin: B09Z6JX2LZ
Brand: cizihuu | Manufacturer: cizihuu
See On Amazon #7
HiLetgo 3pcs TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions
Asin: B07PKND8KG | Model: 3-01-1503 | PartNumber: 3-01-1503
Battery: Over-Current Protection Current 3 A.
Light State: No Load The Light Not Bright, Red Light For Recharging, Is Full Of Green Light..
Maximum Charging Current Output: 1000 Ma.
Battery Overcharge Lifting Voltage: 4.00 V.
Features
- Input interface: Type-c USB.
- Battery overcharge lifting voltage: 4.00 V
- Battery: over-current protection current 3 A
- Maximum charging current output: 1000 ma
- Light state: no load the light not bright, red light for recharging, is full of green light.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.01 pounds
See On Amazon #8
HiLetgo 10pcs 5V 1A 18650 Lithium Battery Charging Board TP4056 Lithium Battery Charging Board Micro USB Charge Module With Protect
Asin: B00LTQU2RK | Model: 3-01-0205 | PartNumber: 3-01-0205 | Ean: 0702082655146 | UPC: 702082655146
Charging Cut-Off Voltage: 4.2V ± 1%.
Maximum Charge Current: 1000Ma.
Input Voltage: 5V.
Features
- HiLetgo 10pcs 5V 1A 18650 Lithium Battery Charging Board
- Input Voltage: 5V
- Charging cut-off voltage: 4.2V 1%
- Maximum charge current: 1000mA
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.05 pounds
See On Amazon #9
DWEII 10PCS Type-C USB 5V 2A Boost Converter Step-Up Power Module Lithium Battery Charging Protection Board LED Display USB for DIY Charger (no Welding Version)
Asin: B09YD5C9QC | Ean: 0701715515956 | UPC: 701715515956
❃❃It Supports The External Key, Which Is Connected To The K Point And The Output Negative Pole. Short Press To Turn On The Power Display And Turn On The 5V Output. Two Consecutive Short Presses Will Turn Off The Power Display And Turn Off The 5V Output..
❃❃1; When The Charging Current Drops To 100Ma After Reaching The Final Floating Charging Voltage, The Charging Cycle Will Be Automatically Terminated; 2; When The Battery Voltage Drops Below 4.1V, The Charging Cycle Starts Again. 3; When The Battery Voltage Is Lower Than 2.8V, The Battery Will Be Pre Charged With A Current Of 180Ma..
❃❃When The Load Current Is Less Than 50Ma Continuously, The Output Will Be Turned Off..
❃❃Usb Is No Welding Version.
Features
- 10PCS ( no welding version) Type-C USB 5V 2A Boost Converter Step-Up Power Module Lithium Battery Charging Protection Board LED Display USB For DIY Charger
- USB is no welding version
- It supports the external key, which is connected to the K point and the output negative pole. Short press to turn on the power display and turn on the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output.
- When the load current is less than 50mA continuously, the output will be turned off.
- 1; When the charging current drops to 100mA after reaching the final floating charging voltage, the charging cycle will be automatically terminated; 2; When the battery voltage drops below 4.1V, the charging cycle starts again. 3; When the battery voltage is lower than 2.8V, the battery will be pre charged with a current of 180mA.
- See more on Amazon...
Brand: DWEII | Manufacturer: DWEII
See On Amazon #10
AITRIP 10pcs TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions (10pcs TP4056 Type-c USB)
Asin: B08DNK398S | Model: EC16958 | PartNumber: EC16958 | Ean: 0701715437173 | UPC: 701715437173
Battery Overcharge Lifting Voltage: 4.00 V.
Charging Cut-Off Voltage: 4.2V ± 1%.
Battery: Over-Current Protection Current 3 A.
Maximum Charging Current Output: 1000Ma.
Features
- Input interface: Type-c USB
- Maximum charging current output: 1000mA
- Battery overcharge lifting voltage: 4.00 V
- Battery: over-current protection current 3 A
- Charging cut-off voltage: 4.2V 1%
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
Weight: 0.04 pounds
See On Amazon #11
HiLetgo 5pcs TP4057 1A 3.7V Lithium Battery Charging Board with Protection Type-C USB C Li-ion Battery Charging Board Over TP4056
Asin: B0CDWZ9MDC | Model: 3-01-1767 | PartNumber: 3-01-1767
Constant Current/Constant Voltage Charging With Over-Temperature Protection.
Dual Output Of Charging Status, No Battery And Fault Status Display.
Type-C Usb C Li-Ion Battery Charging Board.
Features
- TP4057 1A Lithium Battery Charging Board with Protection
- Type-C USB C Li-ion Battery Charging Board
- Constant current/constant voltage charging with over-temperature protection
- Dual output of charging status, no battery and fault status display
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #12
Weewooday Charging Module Battery Charging Board with Battery Protection BMS 5V Micro USB 1A Lithium Battery Charge Module (40 Pieces)
Asin: B08VDL8YFB
Product Information: The Charging Board Inputs With Micro Usb Female, Can Be Directly Inputed To Do With Phone Charger Rechargeable Battery, Still Retains The Input Voltage Wiring Pads, Convenient For You To Diy; Charging Cut-Off Voltage: 4.2V, Max Charge Current: 1000 Ma.
Warm Notice: Please Note That The Charge Should Disconnect The Load Out Terminal On The Positive And Negative Can Not Be Wrong, Please According To Specifications, Otherwise It Will Break Directly; The Ammeter For Testing Current Can Only Be Connected In Series With The 5V Input Terminal Of The Charging Board.
Applicable Occasions: The Battery Charging Board Is Suitable For Single-Cell Lithium Battery Or Multi-Cell Parallel Lithium Battery Charging, And The Charging Port Can Be Powered From Usb, Which Are Convenient For You To Operate.
Functional Usages: Input Voltage Is 5V, Battery Over-Discharge Protection Voltage Is 2.5V, Battery Over Current Protection Current Is 3A; Connect The Battery To The B+ B-, Inserted Into The Usb Female Mobile Phone Charger, The Red Light Is Being Charged And The Green Light To Full.
Features
- Package contents: you will get 40 pieces charging modules in our package, practical tools for you, which can also meet your various needs, enough for you to change and replace
- Functional usages: input voltage is 5V, battery over-discharge protection voltage is 2.5V, battery over current protection current is 3A; Connect the battery to the B+ B-, inserted into the USB female mobile phone charger, the red light is being charged and the green light to full
- Product information: the charging board inputs with micro USB female, can be directly inputed to do with phone charger rechargeable battery, still retains the input voltage wiring pads, convenient for you to DIY; Charging cut-off voltage: 4.2V, max charge current: 1000 mA
- Applicable occasions: the battery charging board is suitable for single-cell lithium battery or multi-cell parallel lithium battery charging, and the charging port can be powered from USB, which are convenient for you to operate
- Warm notice: please note that the charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will break directly; The ammeter for testing current can only be connected in series with the 5V input terminal of the charging board
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
Weight: 0.02 Pounds
See On Amazon #13
ALAMSCN TP4056 Type-C USB 5V 1A 18650 Lithium Battery Charger Module Li-ion Charging Board TC4056A with Dual Protection Functions(Pack of 12)
Asin: B08F7QSLN7 | Model: ALAMSCN | PartNumber: ALAMSCN | Ean: 0701715441620 | UPC: 701715441620
Two-In-One Charging And Discharging Protection Function..
Note: When The Battery Is Connected For The First Time, The Protection Circuit Can Be Activated By Charging It With 5V Voltage..
No Load The Light Not Bright, Red Light For Recharging, Is Full Of Green Light..
There Are Solder Joints For Input Voltage Wiring, Which Is Convenient For Diy..
Features
- The input terminal has a Type-c USB female socket, which can be directly used as an input to charge the lithium battery with a mobile phone charger.
- There are solder joints for input voltage wiring, which is convenient for DIY.
- Two-in-one charging and discharging protection function.
- No load the light not bright, red light for recharging, is full of green light.
- Note: When the battery is connected for the first time, the protection circuit can be activated by charging it with 5V voltage.
- See more on Amazon...
Brand: ALAMSCN | Manufacturer: ALAMSCN
Weight: 0.04 pounds
Warranty: 3 months
See On Amazon #14
AITRIP 10PCS Type-C USB ESP8266 Serial Wireless Module CH340 ESP-12E NodeMCU LUA WiFi V3 Internet Development Board Compatible with Arduino IDE, Micropython
Asin: B0CPSFKNSR | Ean: 0687117728005 | UPC: 687117728005
Wireless Module Ch340 Nodemcu V3 Lua Wifi Internet Of Things Develop Board Based Esp8266 Esp-12E, The Serial Wireless Module Delivers Exceptional Performance, Ensuring Seamless Communication And Data Transmission Over Wifi Networks..
Esp8266 Is A Highly Integrated Chip Designed For The Needs Of A New Connected World.It Offers A Complete And Self-Contained Wi-Fi Networking Solution, Allowing It To Either Host The Application Or To Offload All Wi-Fi Networking Functions From Another Application Processor.
Esp8266 Has Powerful On-Board Processing And Storage Capabilities That Allow It To Be Integrated With The Sensors And Other Application Specific Devices Through Its Gpios With Minimal Development Up-Front And Minimal Loading During Runtime. Its High Degree Of On-Chip Integration Allows For Minimal External Circuitry, And The Entire Solution, Including Front-End Module, Is Designed To Occupy Minimal Pcb Area..
The Ch340 Esp-12E Board Is Perfect For Integrating Into Various Electronic Projects Or Iot Applications, Offering Flexibility And Convenience..
Features
- Built-in Type-C USB , with flash and reset switches, easy to program ESP8266 serial port wifi module NodeMCU Lua V3 Internet of Things development board TYPE-C interface CH340
- the CH340 ESP-12E board is perfect for integrating into various electronic projects or IoT applications, offering flexibility and convenience.
- Wireless Module CH340 NodeMcu V3 Lua WIFI Internet of Things Develop Board based ESP8266 ESP-12E, the serial wireless module delivers exceptional performance, ensuring seamless communication and data transmission over WiFi networks.
- ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
- ESP8266 is a highly integrated chip designed for the needs of a new connected world.It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #15
JacobsParts Smallest USB Type C 3.7V Lithium Battery Charger Board 4.2V Charging Module with Protection Circuit and LED Charge Indicators 5V USB-C Input (2 Pack)
Asin: B0CBNQH836 | Model: CPNT-E-2PK | PartNumber: CPNT-E-2PK | Ean: 0845832035123 | UPC: 845832035123
Incorporates Automatic Charge Cycle Termination And Resumption For Efficient Charging.
Compact And Lightweight Design (14×18×5Mm), Easy To Install And Use..
Integrates Safety Features Including Over-Current, Over-Voltage, And Under-Voltage Protection For Secure Charging.
Charges To 4.2V, Provides 100Ma Pre-Charging For Batteries With Voltages Under 2.9V.
Features
- An ultra-small, 1A charging board for 3.7V lithium batteries with USB Type-C power input and LED charge indicators
- Charges to 4.2V, provides 100mA pre-charging for batteries with voltages under 2.9V
- Incorporates automatic charge cycle termination and resumption for efficient charging
- Integrates safety features including over-current, over-voltage, and under-voltage protection for secure charging
- Compact and lightweight design (14 18 5mm), easy to install and use.
- See more on Amazon...
Brand: JacobsParts | Manufacturer: JacobsParts
Dimensions: 0.20 x 0.71 x 0.55 Inches
Warranty: 1 year manufacturer
See On Amazon #16
AITRIP 5pcs for Nano Board CH340/ATmega+328P Without USB Cable, Type-C Connection Compatible with Arduino Nano V3.0
Asin: B09DKHWSY9 | Ean: 0701715486799 | UPC: 701715486799
The Nano Is Using The Chips Atmega328p And Ch340, Replace Ft232rl..
Uses The Ch340g Instead Of The Ftdi Ft232rl Ic Which Can Improve The Transfer Speed, Increase The Stability In Windows And Solve The Issues With Ftdi Drivers Bricking Non-Original Chips, Atmega328p Offers Even More Programming And Data Memory Space. It Also Has A Pin Layout That Works Well With The Mini Or The Basic Stamp (Tx, Rx, Atn, Gnd On One Side, Power, And Ground On The Other)..
Comes With 5Packs Of Nano V3.0 Micro Controller Module, Each Nano V3.0 Micro Controller Module Is Equipped With 3Pcs Pin Headers (2Pcs 15Pin Headers +1Pcs 6Pin Headers), No Welding Needed..
It Is A Smallest, Complete, And Breadboard Friendly Board. It Has Everything That Diecimila/Duemilanove Has (Electrically) With More Analog Input Pins And Onboard +5V Aref Jumper..
Support For External 5V~12V Dc Power Supply, Support Power Supply By 9V Battery..
Features
- The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- Support for external 5V~12V DC power supply, Support power supply by 9V battery.
- The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
- It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
- Uses the CH340G instead of the FTDI FT232RL IC which can improve the transfer speed, increase the stability in windows and solve the issues with FTDI drivers bricking non-original chips, ATMEGA328P offers even more programming and data memory space. It also has a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one side, power, and ground on the other).
- Comes with 5packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed.
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #17
AITRIP 20PCS Boost Step Up 5V 1A Power Supply Module Lithium Battery Charge Protection Board 134N3P DIY Charger USB and Micro USB Port with LED Display
Asin: B09BTMRYV2 | Ean: 0701715486201 | UPC: 701715486201
Safety Protection Function: Constant Over Temperature Protection, Overcharge And Over Discharge Protection, Output Overvoltage Protection, Output Overload Protection, Output Short Circuit Protection, Etc..
Charging And Discharging: 134N3p Has Built-In Charging And Discharging Power Mos, The Charging Current Can Be Set, The Maximum Charging Current And Maximum Discharging Current Are 1A..
Applicable To Manifold Batteries Such As Polymer, 18650 Lithium, Mobile Phone And Tablet Battery Etc.
Internally Installed Charging And Discharging Power Mos..
Features
- Input Voltage: 3.7V-5.5V. Output Voltage and Current: 5V 1A.
- Internally installed charging and discharging power MOS.
- Safety protection function: Constant over temperature protection, overcharge and over discharge protection, output overvoltage protection, output overload protection, output short circuit protection, etc.
- Applicable to manifold batteries such as Polymer, 18650 Lithium, Mobile Phone and Tablet Battery etc
- Charging and discharging: 134N3P has built-in charging and discharging power MOS, the charging current can be set, the maximum charging current and maximum discharging current are 1A.
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #18
20pcs 18650 Lithium Battery Charging Board TP4056 Mini USB Charging Board 5V 1A with Battery Protection Dual Functions TP4056 Lithium Battery Charge Module
Asin: B09Q11FFNC | Ean: 0701715510517 | UPC: 701715510517
When The Input Voltage (Ac Adapter Or Usb Power Supply) Is Removed, The Tp4056 Automatically Enters A Low Current State, Reducing The Battery Leakage Current To Less Than 2Ua.Tp4056 Can Also Be Placed In Shutdown Mode When There Is Power Supply, Reducing The Power Supply Current To 55Ua..
Battery Charging Board Connect The Battery To The B + B-, Inserted Into The Usb Female Mobile Phone Charger, The Red Light Is Being Charged, The Green Light To Full..
18650 Lithium Battery Charger Board Input Voltage Is 5V, Battery Over-Discharge Protection Voltage Is 2.5V, B + Positive Then The Lithium Battery, B- Then Negative Lithium Batteries.Out + And Out- Connected To The Load, Such As Positive And Negative Electrodes Connected Mobile Booster Plate Or Other Load..
Tp4056 Charging Module Charging Voltage Is Fixed At 4.2V, And The Charging Current Can Be Set Externally Through A Resistor. When The Charging Current Reaches The Final Float Voltage And Drops To 1/10 Of The Set Value, The Tp4056 Will Automatically Terminate The Charging Cycle..
Features
- TP4056 is a complete single-cell lithium-ion battery with a constant current/constant voltage linear charger, is suitable for USB power supply and adapter power supply.
- TP4056 charging module charging voltage is fixed at 4.2V, and the charging current can be set externally through a resistor. When the charging current reaches the final float voltage and drops to 1/10 of the set value, the TP4056 will automatically terminate the charging cycle.
- When the input voltage (AC adapter or USB power supply) is removed, the TP4056 automatically enters a low current state, reducing the battery leakage current to less than 2uA.TP4056 can also be placed in shutdown mode when there is power supply, reducing the power supply current to 55uA.
- 18650 lithium battery charger board input voltage is 5V, battery over-discharge protection voltage is 2.5V, B + positive then the lithium battery, B- then negative lithium batteries.OUT + and OUT- connected to the load, such as positive and negative electrodes connected mobile booster plate or other load.
- Battery charging board connect the battery to the B + B-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full.
- See more on Amazon...
Manufacturer: Shutao
See On Amazon #19
CHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board with Protection Charger Module
Asin: B06XCXPY86 | Model: 4333092022 | PartNumber: 4333092022 | Ean: 6923074054820
Input Voltage: 5V.
Inputs With Micro Usb Female, Can Be Directly Input To Do With The Phone Charger Rechargeable Lithium Battery.
Connect The Battery To The B + B-, Inserted Into The Usb Female Mobile Phone Charger, The Red Light Is Being Charged, The Green Light To Full..
Maximum Charge Current: 1000Ma.
Features
- Charging cut-off voltage: 4.2V 1%
- Maximum charge current: 1000mA
- Input voltage: 5V
- Connect the battery to the B + B-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full.
- Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
Weight: 0.04 pounds
See On Amazon #20
AITRIP 6PCS 2A USB 18650 Lithium Li-ion Battery Charger Module Boost 3.7V to 5V 9V 12V Adjustable DC-DC Step Up Boost Module TP4056 DIY Kit Parts
Asin: B08GWTBD3T | Model: EC19 | PartNumber: EC19 | Ean: 0701715443501 | UPC: 701715443501
Input Voltage: 4.5-8V Dc.
Charging Voltage: 4.2V Dc ；Charging Current: Max. 1A.
Output Voltage: 4.3-27V Dc (Continuously Adjustable).
Discharging Current: Max. 2A.
Features
- Can be used for multimeter, converted to lithium battery charging
- Discharging current: Max. 2A
- Input voltage: 4.5-8V DC
- Output voltage: 4.3-27V DC (Continuously adjustable)
- Charging voltage: 4.2V DC Charging current: Max. 1A
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
Weight: 0.07 pounds
See On Amazon
Looking For Something Else?
Search