RATTMMOTOR 3pcs Nema23 23HS8430B Dual Shaft 57mm 57mm 76mm Stepper Motor 270Oz-in 1.8 3A 4 Lead Wire for CNC Router Milling Engraving Machine
Asin: B0C49SSHSX | Model: 23HS8430B-3P | PartNumber: 23HS8430B-3P | Ean: 0754193411791 | UPC: 754193411791
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Advanced Technology】The Motor Coils Are Made Of Pure Copper Enamelled Coils, Built By Advanced Winding Technology, With Evenly Distributed Copper Wires, Not Easy To Get Hot Or Burn, Lower Temperature Rise Of The Motor, No Deformation And Noise For A Long Time..
【Low Noise 】The Stepper Motor Is Housed In A High Strength Metal Casing, Which Is Robust And Durable, With Frosted Metal Side Walls For Increased Friction..
High Torque 】High Quality Motor Steel, Low Self-Induced Reactance In The Bearings, Good Responsiveness, Direct Linkage To The Load At Low Speeds At Near Blocked Speeds, Without Gear Reduction..
Excellent Performance】It Has High Torque, The Stepper Motor's Power Is 15%-20% Higher Than Conventional Motors. The Circuit Board Inside The Bipolar Motor Has Been Updated To Ensure The Stability Of The Motor Structure And Achieve The Best Uniform Rotation..
Features
- 23HS8430B Motor Parameter Phase: 2 Phase; Step Angle: 1.8 degree; Frame Size: 57x57x76mm; Shaft Diameter: 8mm; Holding Torque: 180N.cm (270Oz-in); Phase Resistance: 1ohms; Rated Current/phase: 3A; Inductance: 3.5mH+/-20%(1KHz).
- Excellent Performance It has high torque, the stepper motor's power is 15%-20% higher than conventional motors. The circuit board inside the bipolar motor has been updated to ensure the stability of the motor structure and achieve the best uniform rotation.
- Advanced Technology The motor coils are made of pure copper enamelled coils, built by advanced winding technology, with evenly distributed copper wires, not easy to get hot or burn, lower temperature rise of the motor, no deformation and noise for a long time.
- High Torque High quality motor steel, low self-induced reactance in the bearings, good responsiveness, direct linkage to the load at low speeds at near blocked speeds, without gear reduction.
- Low Noise The stepper motor is housed in a high strength metal casing, which is robust and durable, with frosted metal side walls for increased friction.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon Similar To RATTMMOTOR 3pcs Nema23 23HS8430B Dual
#1
STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 178.4oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill
Asin: B00PNEPF5I | Model: 23HS22-2804S | PartNumber: 23HS22-2804S | Ean: 7241870685987, 7535001558364, 5915903798853, 0190657723350, 0714485662461, 0701056353927 | UPC: 701056353927, 714485662461, 190657723350
Nema 23 Bipolar 2.24"X2.24"X2.2" 4-Wire.
Rated Current 2.8A & Resistance 0.9Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
1.26Nm(178.4Oz.In) Holding Torque.
Features
- Higher Torque
- 1.26Nm(178.4oz.in) holding torque
- NEMA 23 bipolar 2.24x2.24x2.2 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 2.8A & resistance 0.9ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OSM Technology Co.,Ltd.
Dimensions: 2.20 x 2.24 x 2.24 inches | Weight: 1.50 pounds
See On Amazon #2
STEPPERONLINE CNC Stepper Motor Nema 23 Bipolar 2.8A 269oz.in/1.9Nm CNC Mill Lathe Router
Asin: B00PNEPI0A | Model: 23HS30-2804S | PartNumber: 23HS30-2804S | Ean: 0714485613890, 0701056324644, 0714485506079, 7566908096000, 5272003743108 | UPC: 701056324644, 714485506079, 714485613890
Nema 23 Bipolar 2.24"X2.24"X3.0" 4-Wire.
Rated Current 2.8A & Resistance 1.13Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
Single Shaft 6.35Mm Diameter.
Features
- 1.9Nm(269oz.in) holding torque
- Single Shaft 6.35mm diameter
- NEMA 23 bipolar 2.24x2.24x3.0 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 2.8A & resistance 1.13ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
Dimensions: 3.00 x 2.24 x 2.24 inches | Weight: 2.30 pounds
See On Amazon #3
STEPPERONLINE Nema 23 Stepper Motor 2.4Nm(339.79oz.in) 4.0A 8mm Shaft 57x57x82mm 4 Wires
Asin: B091C37FJ2 | Model: 23HS32-4004S | PartNumber: 23HS32-4004S | Ean: 0750226819848 | UPC: 750226819848
Nema 23 Motor Driving Voltage Is 24-48Vdc, Suggest 36 Vdc.
1.8 Deg. Step Angle(200 Steps/Rev).
*Rated Current/Phase: 4.0A, Phase Resistance: 0.65Ohms.
2.4Nm(339.79Oz.In) Holding Torque.
Features
- Nema 23 stepper motor with 8mm shaft
- 2.4Nm(339.79oz.in) Holding Torque
- Nema 23 motor driving voltage is 24-48VDC, suggest 36 VDC
- *Rated Current/phase: 4.0A, Phase Resistance: 0.65ohms
- 1.8 deg. step angle(200 steps/rev)
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
Weight: 2.65 pounds
See On Amazon #4
STEPPERONLINE 3PCS Nema 23 CNC Stepper Motor 2.8A 1.26Nm/178.4oz.in 56mm Bipolar for Hobby CNC Kit
Asin: B00QG1ZF48 | Model: 3-23HS22-2804S | PartNumber: 3-23HS22-2804S | Ean: 0701056584819, 0715776745047 | UPC: 701056584819, 715776745047
Nema 23 Bipolar 2.24"X2.24"X2.2" 4-Wire.
Rated Current 2.8A & Resistance 0.9Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
1.26Nm(178.4Oz.In) Holding Torque.
Features
- Package in 3PCS
- 1.26Nm(178.4oz.in) holding torque
- NEMA 23 bipolar 2.24x2.24x2.2 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 2.8A & resistance 0.9ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OSM Technology Co.,Ltd.
Weight: 1.54 pounds
See On Amazon #5
STEPPERONLINE 3PCS 3Nm Nema 23 Stepper Motor 4.2A 4-wires 10mm Shaft DIY CNC Mill Lathe Router
Asin: B00QG32Y86 | Model: 23HS45-4204S | PartNumber: 23HS45-4204S | Ean: 0701056538843 | UPC: 701056538843
Nema 23 Bipolar 2.24"X2.24"X4.45" 4-Wire.
Rated Current 4.2A & Resistance 0.9Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
3Nm(425Oz.In) Holding Torque.
Features
- Package in 3PCS
- 3Nm(425oz.in) holding torque
- NEMA 23 bipolar 2.24x2.24x4.45 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 4.2A & resistance 0.9ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OSM Technology Co.,Ltd.
Dimensions: 4.45 x 2.24 x 2.24 Inches | Weight: 11.46 pounds
See On Amazon #6
STEPPERONLINE Dual Shaft Nema 23 CNC Stepper Motor 1.26Nm(179oz.in) 8 Wires CNC Mill Router
Asin: B01L3QVV66 | Model: 23HS22-3008D | PartNumber: 23HS22-3008D | Ean: 0705701873907 | UPC: 705701873907
Holding Torque: 1.26Nm(178.5Oz.In).
8 Wires Unipolar Or Bipolar.
Features
- Dual Shaft Stepper Motor
- 8 wires Unipolar or Bipolar
- Holding Torque: 1.26Nm(178.5oz.in)
- See more on Amazon...
Brand: STEPPERONLINE
Weight: 1.85 Pounds
See On Amazon #7
CNCTOPBAOS Nema23 CNC Stepper Motor 425oz-in 112mm 3A 2.8N.m 1.8 4 Lead Wire for CNC Router Engraving Milling Lathe Machine
Asin: B0774XR6V5 | Model: S23 | PartNumber: S23 | Ean: 0785004502599 | UPC: 785004502599
♞【Size&Current】57X57x112mm ; Rated Current 3A.
♞【Applications】Semiconductor Equipment, Milling Machine, Engraver Machine , Cnc Routers , 3D Printers, Medical Equipment, Industrial Equipment And Automation Devices Etc..
♞【Type】2 Phase Hybrid Stepper Motor With 4 Lead Wires.(1.8 Degree).
♞【High Torque】2.8N.M (425Oz-In) Holding Torque.
Features
- Model 23HS2430
- High Torque 2.8N.m (425oz-in) holding torque
- Size&Current 57x57x112mm ; Rated current 3A
- Type 2 phase Hybrid Stepper Motor with 4 lead wires.(1.8 degree)
- Applications Semiconductor Equipment, Milling Machine, Engraver Machine , CNC Routers , 3D printers, medical equipment, industrial equipment and automation devices etc.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Dimensions: 0.00 x 2.24 x 0.00 inches | Weight: 3.84 Pounds
See On Amazon #8
STEPPERONLINE Nema 23 Stepper Motor 2.83Nm 4A 8-Wire 6.35mm Dual Shaft CNC Mill Lathe Router
Asin: B00Q62MBHQ | Model: 23HS33-4008D | PartNumber: 23HS33-4008D | Ean: 0715624560792, 0701056534548 | UPC: 715624560792, 701056534548
Nema 23 Bipolar 2.24"X2.24"X3.3" 8-Wire.
Rated Current 4.0A & Resistance 0.4Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
2.83Nm(400Oz.In) Holding Torque.
Features
- Medium Height/Torque Dual Shaft
- 2.83Nm(400oz.in) holding torque
- NEMA 23 bipolar 2.24x2.24x3.3 8-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 4.0A & resistance 0.4ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OSM Technology Co.,Ltd.
Dimensions: 2.24 x 2.24 x 3.31 inches | Weight: 3.00 Pounds
See On Amazon #9
RATTMMOTOR 3 Axis CNC Controller Kit with Nema23 Stepper Motor 270oz-in 76mm 3A 1.8Nm, TB6600 Stepper Motor Driver 24VDC, USB Mach3 Motion Control Card Breakout Board, 350W Switching Power Supply
Asin: B08G1BQ68M | Model: 3ARED-CKIT | PartNumber: 3ARED-CKIT | Ean: 0619191686254 | UPC: 619191686254
【Low Noise/High Torque Hybrid Stepper Motor】23Hs8430 2-Phase Stepper Motor With A Shaft Diameter Of 8Mm, A Current Of 3A And An Angle Of 1.8°, Is Made Of Durable Metal On The Outside, And The Perfect Combination Of Rubber And Rotor Fills Up The Inner Space And Stabilizes The Overall Structure Of The Motor. The Coils Are Made Of Pure Copper Enameled Wire And The Torque Is Up To 270Oz-In (180N.Cm/18Kg-Cm). The Motor Runs Quietly And Doesn't Cause The Generator To Become Too Hot Over A Long Time..
【Stable Output 24V Dc Power Supply】Over-Current, Over-Voltage And Overload Protection, Power Supply Stable Power Supply, Electrical Energy Conversion Rate Of Up To 90%, Higher Efficiency. Together With The Heat Dissipation Fan Design, Shell Hollow Design, Heat Dissipation Ability Faster And Stronger, More Durable Performance..
【Usb Interface, Drive-Free Design 4-Axis Linkage Control Card】Output Pulse Frequency Of 400Khz, Using The Minimum Error Interpolation Algorithm, High Processing Accuracy. Supports Up To 4 Axes Of Linkage Control, Of Which The 4Th Axis Can Be Set As The Slave Axis. The Control Card Can Be Connected To Pc-Compatible Computers Such As Laptops, Desktops, Tablets And Other Computers With A Usb Interface. As Long As Mach3 Is Running, The Control Card Can Be Used Without Installing Any Drivers..
【Multi-Function Control Card】With Support For Automatic Home Return, Automatic Tool Setting, Emergency Stop Input, Limit Switch Access, Spindle Control (Pwm Mode And Him Electrical Mode), Handwheel Interface And Other Functions. Provide Up To 12-Way Digital Signal Input, 4-Way With Optocoupler Digital Signal Input And Isolated Relay Output. Strong Anti-Interference And High Reliability..
【Upgraded 4.5A Stepper Motor Driver】Using The Latest Tb6600 New Installation Chip, There Are Low-Voltage Shutdown, Thermal Over-Stop And Over-Current Circuit Protection, And Compared With The Tb6560 Increased Short-Circuit Protection. Tb6600 Driver Operating Voltage Of Dc 10-45Vdc, Support For Sub-Division Of The Whole Step, Half-Step, 1/4, 1/8, 1/16 Step, Up To 42/57/86 Two-Phase / Four-Phase / Four-Wire / Six-Wire Stepper Motors Within 4.2A. / Six-Wire Stepper Motor..
【Control Card And Tb6600 Driver Wiring (X-Axis As An Example) 】Driver's "Clk-" Connects To Control Card's Xp Pin , Driver's "Cw-" Connects To Control Card's Xd Pin , Driver's "5V" Connects To Control Card's 5V Pin.(The Usb Mach3 Control Card Can't Support Connection En- And En+)..
Features
- Motor and TB6600 Driver wiring Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
- Control Card and TB6600 Driver wiring (X-axis as an example) Driver's CLK- connects to control card's XP pin , Driver's CW- connects to control card's XD pin , Driver's 5V connects to control card's 5V pin.(The USB Mach3 control card can't support connection EN- and EN+).
- Low Noise/High Torque Hybrid Stepper Motor 23HS8430 2-phase stepper motor with a shaft diameter of 8mm, a current of 3A and an angle of 1.8 , is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
- Upgraded 4.5A Stepper Motor Driver Using the latest TB6600 new installation chip, there are low-voltage shutdown, thermal over-stop and over-current circuit protection, and compared with the TB6560 increased short-circuit protection. TB6600 driver operating voltage of DC 10-45VDC, support for sub-division of the whole step, half-step, 1/4, 1/8, 1/16 step, up to 42/57/86 two-phase / four-phase / four-wire / six-wire stepper motors within 4.2A. / six-wire stepper motor.
- USB Interface, Drive-free Design 4-Axis Linkage Control Card Output pulse frequency of 400KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.
- Multi-function control card With support for automatic home return, automatic tool setting, emergency stop input, limit switch access, spindle control (PWM mode and Him electrical mode), handwheel interface and other functions. Provide up to 12-way digital signal input, 4-way with optocoupler digital signal input and isolated relay output. Strong anti-interference and high reliability.
- Stable output 24V DC power supply Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #10
STEPPERONLINE 3PCS Nema 23 CNC Stepper Motor 2.8A 269oz.in 76mm Bipolar for Hobby CNC Kit
Asin: B00QG2HPMM | Model: 3-23HS30-2804S | PartNumber: 3-23HS30-2804S | Ean: 0715776688221, 0701056560295 | UPC: 715776688221, 701056560295
Nema 23 Bipolar 2.24"X2.24"X3.0" 4-Wire.
Rated Current 2.8A & Resistance 1.13Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
1.9Nm(269Oz.In) Holding Torque.
Features
- Package in 3PCS
- 1.9Nm(269oz.in) holding torque
- NEMA 23 bipolar 2.24x2.24x3.0 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 2.8A & resistance 1.13ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OSM Technology Co.,Ltd.
Weight: 2.65 pounds
See On Amazon #11
Nema 23 Stepper Motor 4.0A 2.0Nm 76mm Length with 8mm Shaft for CNC Mill Lathe Route
Asin: B0CNJZY22T | Model: Nema 23-76 Stepper Motor | PartNumber: Nema 23-76 Stepper Motor
Size：Precisely Machined Full Metal Body. Frame Size: 57 X 57Mm ,Body Length: 112Mm ,Shaft Diameter: 8Mm , Shaft Length: 18Mm.
Warning: Make Sure The Motor Connect To A Constant Current Or Chopper Drive Controller Before You Test Motor. Connecting The Motor Directly To A Power Supply Will Destroy The Motor..
Connection: Red(A+), Blue(A-), Green(B+), Black(B-),30Cm Lead Wire, 2-Phase 4-Wire, Available For Rotation Of Forward And Reverse..
Specification：2.0Nm Holding Torque，Current：4.0A,Step Angle：1.8°，Phase：2，Resistance：0.8±10%Ω，Inductance：1.75±10%Mh.
Features
- Nema 23 76MM Stepper Motor, great for 3D printer and DIY CNC
- Specification 2.0Nm holding torque Current 4.0A,Step angle 1.8 phase 2 Resistance 0.8 10% inductance 1.75 10%mH
- Size Precisely machined full metal body. Frame Size: 57 x 57mm ,Body Length: 112mm ,Shaft Diameter: 8mm , Shaft Length: 18mm
- Connection: Red(A+), Blue(A-), Green(B+), Black(B-),30cm lead wire, 2-phase 4-wire, available for rotation of forward and reverse.
- Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.
- See more on Amazon...
Brand: LUNYEE | Manufacturer: LUNYEE
See On Amazon #12
RATTMMOTOR 3pcs Nema23 23HS8430 Single Shaft 57mm 57mm 76mm Stepper Motor 270Oz-in 1.8 3A 4 Lead Wire for CNC Router Milling Engraving Machine
Asin: B0C49MQNRJ | Model: 23HS8430-3P | PartNumber: 23HS8430-3P | Ean: 0754193411838 | UPC: 754193411838
【Advanced Technology】The Motor Coils Are Made Of Pure Copper Enamelled Coils, Built By Advanced Winding Technology, With Evenly Distributed Copper Wires, Not Easy To Get Hot Or Burn, Lower Temperature Rise Of The Motor, No Deformation And Noise For A Long Time..
【Low Noise 】The Stepper Motor Is Housed In A High Strength Metal Casing, Which Is Robust And Durable, With Frosted Metal Side Walls For Increased Friction..
【High Torque 】High Quality Motor Steel, Low Self-Induced Reactance In The Bearings, Good Responsiveness, Direct Linkage To The Load At Low Speeds At Near Blocked Speeds, Without Gear Reduction..
【Excellent Performance】It Has High Torque, The Stepper Motor's Power Is 15%-20% Higher Than Conventional Motors. The Circuit Board Inside The Bipolar Motor Has Been Updated To Ensure The Stability Of The Motor Structure And Achieve The Best Uniform Rotation..
Features
- 23HS8430 Motor Parameter Phase: 2 Phase; Step Angle: 1.8 degree; Frame Size: 57x57x76mm; Shaft Diameter: 8mm; Holding Torque: 180N.cm (270Oz-in); Phase Resistance: 1ohms; Rated Current/phase: 3A; Inductance: 3.5mH+/-20%(1KHz).
- Excellent Performance It has high torque, the stepper motor's power is 15%-20% higher than conventional motors. The circuit board inside the bipolar motor has been updated to ensure the stability of the motor structure and achieve the best uniform rotation.
- Advanced Technology The motor coils are made of pure copper enamelled coils, built by advanced winding technology, with evenly distributed copper wires, not easy to get hot or burn, lower temperature rise of the motor, no deformation and noise for a long time.
- High Torque High quality motor steel, low self-induced reactance in the bearings, good responsiveness, direct linkage to the load at low speeds at near blocked speeds, without gear reduction.
- Low Noise The stepper motor is housed in a high strength metal casing, which is robust and durable, with frosted metal side walls for increased friction.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #13
STEPPERONLINE Nema 23 Stepper Motor 3.0A 269oz.in/1.9Nm 76mm Length Step Motor for CNC Mill Lathe Router
Asin: B077Z5QJCL | Model: 23HS30-3004S | PartNumber: 23HS30-3004S | Ean: 0715776363081 | UPC: 715776363081
Nema 23 Bipolar 2.24"X2.24"X3.0" 4-Wire.
Rated Current 3.0 A& Resistance 1.12Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
Single Shaft 6.35Mm Diameter.
Features
- 1.9Nm(269oz.in) holding torque
- Single Shaft 6.35mm diameter
- NEMA 23 bipolar 2.24x2.24x3.0 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 3.0 A& resistance 1.12ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
Dimensions: 3.00 x 2.24 x 2.24 inches | Weight: 2.30 pounds
See On Amazon #14
RATTMMOTOR 3pcs Nema23 Stepper Motor 23HS2430 Single Shaft 57mm 57mm 112mm Stepper Motor 2-Phase, 425oz-in, 8mm Shaft, 1.8 , 3A, 4 Lead Wire for CNC Router Milling Engraving Machine
Asin: B0C4GW3SQ2 | Model: 23HS2430-3P | PartNumber: 23HS2430-3P | Ean: 0754193411753 | UPC: 754193411753
【Advanced Technology】The Motor Coils Are Made Of Pure Copper Enamelled Coils, Built By Advanced Winding Technology, With Evenly Distributed Copper Wires, Not Easy To Get Hot Or Burn, Lower Temperature Rise Of The Motor, No Deformation And Noise For A Long Time..
【Low Noise 】The Stepper Motor Is Housed In A High Strength Metal Casing, Which Is Robust And Durable, With Frosted Metal Side Walls For Increased Friction..
【High Torque 】High Quality Motor Steel, Low Self-Induced Reactance In The Bearings, Good Responsiveness, Direct Linkage To The Load At Low Speeds At Near Blocked Speeds, Without Gear Reduction..
【Excellent Performance】It Has High Torque, The Stepper Motor's Power Is 15%-20% Higher Than Conventional Motors. The Circuit Board Inside The Bipolar Motor Has Been Updated To Ensure The Stability Of The Motor Structure And Achieve The Best Uniform Rotation..
Features
- 23HS2430 Motor Parameter Phase: 2 Phase; Step Angle: 1.8 degree; Frame Size: 57 x 57 x 112 mm; Shaft Diameter: 8mm; Holding Torque: 2.8Nm (425oz.in); Phase Resistance: 1.6ohms; Rated Current/phase: 3A; Inductance: 6.8mH+/-20%(1KHz).
- Excellent Performance It has high torque, the stepper motor's power is 15%-20% higher than conventional motors. The circuit board inside the bipolar motor has been updated to ensure the stability of the motor structure and achieve the best uniform rotation.
- Advanced Technology The motor coils are made of pure copper enamelled coils, built by advanced winding technology, with evenly distributed copper wires, not easy to get hot or burn, lower temperature rise of the motor, no deformation and noise for a long time.
- High Torque High quality motor steel, low self-induced reactance in the bearings, good responsiveness, direct linkage to the load at low speeds at near blocked speeds, without gear reduction.
- Low Noise The stepper motor is housed in a high strength metal casing, which is robust and durable, with frosted metal side walls for increased friction.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 0.00 x 2.24 inches | Weight: 10.80 pounds
See On Amazon #15
RATTMMOTOR 3PCS Nema23 23HS2430B Dual Shaft 57mm 57mm 112mm Stepper Motor 425oz-in 1.8 3A 4 Lead Wire for CNC Router Milling Engraving Machine
Asin: B0C4GX6DHH | Model: 23HS2430B-3P | PartNumber: 23HS2430B-3P | Ean: 0754193411715 | UPC: 754193411715
【Advanced Technology】The Motor Coils Are Made Of Pure Copper Enamelled Coils, Built By Advanced Winding Technology, With Evenly Distributed Copper Wires, Not Easy To Get Hot Or Burn, Lower Temperature Rise Of The Motor, No Deformation And Noise For A Long Time..
【Low Noise 】The Stepper Motor Is Housed In A High Strength Metal Casing, Which Is Robust And Durable, With Frosted Metal Side Walls For Increased Friction..
【High Torque 】High Quality Motor Steel, Low Self-Induced Reactance In The Bearings, Good Responsiveness, Direct Linkage To The Load At Low Speeds At Near Blocked Speeds, Without Gear Reduction..
【Excellent Performance】It Has High Torque, The Stepper Motor's Power Is 15%-20% Higher Than Conventional Motors. The Circuit Board Inside The Bipolar Motor Has Been Updated To Ensure The Stability Of The Motor Structure And Achieve The Best Uniform Rotation..
Features
- 23HS2430B Motor Parameter Phase: 2 Phase; Step Angle: 1.8 degree; Frame Size: 57 x 57 x 112 mm; Shaft Diameter: 8mm; Holding Torque: 2.8Nm (425oz.in); Phase Resistance: 1.6ohms; Rated Current/phase: 3A; Inductance: 6.8mH+/-20%(1KHz).
- Excellent Performance It has high torque, the stepper motor's power is 15%-20% higher than conventional motors. The circuit board inside the bipolar motor has been updated to ensure the stability of the motor structure and achieve the best uniform rotation.
- Advanced Technology The motor coils are made of pure copper enamelled coils, built by advanced winding technology, with evenly distributed copper wires, not easy to get hot or burn, lower temperature rise of the motor, no deformation and noise for a long time.
- High Torque High quality motor steel, low self-induced reactance in the bearings, good responsiveness, direct linkage to the load at low speeds at near blocked speeds, without gear reduction.
- Low Noise The stepper motor is housed in a high strength metal casing, which is robust and durable, with frosted metal side walls for increased friction.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #16
STEPPERONLINE Nema 23 Stepper Motor 8mm Shaft Bipolar 3Nm(425oz.in) 4.2A 57x57x113mm 4 Wires CNC Engraving Machine
Asin: B0CG58KY17 | Model: 23HS45-4204S1 | PartNumber: 23HS45-4204S1
4.2A Rated Current/Phase, 3.0Nm Holding Torque.
0.88Ohms Phase Resistance, 3.4Mh±20%(1Khz) Inductance.
Step Angle 1.8Deg, 200 Steps/Revolution.
Features
- 8mm shaft diameter nema 23 stepper motor, 113mm Motor Length
- Step angle 1.8deg, 200 steps/revolution
- 4.2A Rated Current/phase, 3.0Nm Holding Torque
- 0.88ohms Phase Resistance, 3.4mH 20%(1KHz) Inductance
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
Dimensions: 2.25 x 2.25 x 2.25 inches | Weight: 3.97 Pounds
See On Amazon #17
RATTMMOTOR Nema23 Stepper Motor 23HS6403, 165oz-in, 1.8 Drgree, 2.5A, 2-Phase High Torque Hybrid CNC Stepper Motor 56mm, 4-Lead for CNC Router Milling Lathe Machine, 3D Printer, Robot
Asin: B0CT4JB7DH | Model: 23HS6403 | PartNumber: 23HS6403 | Ean: 0754193614543 | UPC: 754193614543
【Advanced Technology】The Motor Coils Are Made Of Pure Copper Enamelled Coils, Built By Advanced Winding Technology, With Evenly Distributed Copper Wires, Not Easy To Get Hot Or Burn, Lower Temperature Rise Of The Motor, No Deformation And Noise For A Long Time..
【Low Noise 】The Stepper Motor Is Housed In A High Strength Metal Casing, Which Is Robust And Durable, With Frosted Metal Side Walls For Increased Friction..
【How To Wiring The 4-Lead Wire】 Stepper Motor's Red Wire Connects To Driver's A+ Port; Stepper Motor's Green Wire Connects To Driver's A- Port; Stepper Motor's Yellow Wire Connect To Driver's B+ Port; Stepper Motor's Blue Wire Connect To Driver's B- Port..
【High Torque 】High Quality Motor Steel, Low Self-Induced Reactance In The Bearings, Good Responsiveness, Direct Linkage To The Load At Low Speeds At Near Blocked Speeds, Without Gear Reduction..
【Excellent Performance】It Has High Torque, The Stepper Motor's Power Is 15%-20% Higher Than Conventional Motors. The Circuit Board Inside The Bipolar Motor Has Been Updated To Ensure The Stability Of The Motor Structure And Achieve The Best Uniform Rotation..
Features
- 23HS6403 Motor Parameter Phase: 2 Phase; Step Angle: 1.8 degree; Frame Size: 56 x 56 x 56 mm; Shaft Diameter: 6.35mm; Holding Torque: 1.1Nm (165oz.in);Rated Current/phase: 2.5A.
- Excellent Performance It has high torque, the stepper motor's power is 15%-20% higher than conventional motors. The circuit board inside the bipolar motor has been updated to ensure the stability of the motor structure and achieve the best uniform rotation.
- Advanced Technology The motor coils are made of pure copper enamelled coils, built by advanced winding technology, with evenly distributed copper wires, not easy to get hot or burn, lower temperature rise of the motor, no deformation and noise for a long time.
- High Torque High quality motor steel, low self-induced reactance in the bearings, good responsiveness, direct linkage to the load at low speeds at near blocked speeds, without gear reduction.
- Low Noise The stepper motor is housed in a high strength metal casing, which is robust and durable, with frosted metal side walls for increased friction.
- How to wiring the 4-lead wire Stepper motor's Red wire connects to driver's A+ port; Stepper motor's GREEN wire connects to driver's A- port; Stepper motor's YELLOW wire connect to driver's B+ port; Stepper motor's BLUE wire connect to driver's B- port.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RATTMMOTOR
Weight: 1.50 pounds
See On Amazon #18
CNCTOPBAOS 3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 270oz.in 76mm 3A+MD430 Driver+5 Axis Breakout Board Mach3 Controller Card+350W 24V DC Power Supply for CNC Router Engraving Milling Machine
Asin: B07595QX6W | Ean: 0785004502278 | UPC: 785004502278
♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 270 Oz-In,180N.Cm / Motor Size:57X57x76mm / Phase:2 / Motor Wire:4Pcs / 1.8 Step.
♞【5 Axis Breakout Board】 Come With Db25 Parallel Cable And Usb Cable;Support Mach3,Kcam4,Emc2 And Other Software;5-Way Input Interface, You Can Connect Limit Switch And Stop Switch,Reset,Knife Signal;.
♞【Stepper Motor Driver】 : Md430 Stepper Motor Driver 3Amps / Support Voltages:12-34Vdc / Step Frequency Up To 100Khz / 2 Phases Bipolar Driver.
Features
- Product 3 Axis nema23 stepper motor driver controller kit; Model Number:23HS8430B/TB6560
- Stepper Motor Driver : MD430 Stepper Motor Driver 3Amps / Support voltages:12-34VDC / Step frequency up to 100khz / 2 phases bipolar driver
- Nema 23 Stepper Motor Nema 23 Stepper Motor / Holding Torque: 270 oz-in,180N.cm / Motor Size:57x57x76mm / Phase:2 / Motor wire:4pcs / 1.8 Step
- 5 Axis Breakout Board Come with DB25 parallel cable and USB cable;Support MACH3,KCAM4,EMC2 and other software;5-way input interface, you can connect limit switch and stop switch,reset,knife signal;
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #19
RATTMMOTOR Nema23 Stepper Motor 23HS9430, 308oz-in, 1.8 Drgree, 3A, 2-Phase High Torque Hybrid CNC Stepper Motor 81mm, 4-Lead for CNC Router Milling Lathe Machine, 3D Printer, Robot
Asin: B0CT4J7KWP | Model: 23HS9430 | PartNumber: 23HS9430 | Ean: 0754193614536 | UPC: 754193614536
【Advanced Technology】The Motor Coils Are Made Of Pure Copper Enamelled Coils, Built By Advanced Winding Technology, With Evenly Distributed Copper Wires, Not Easy To Get Hot Or Burn, Lower Temperature Rise Of The Motor, No Deformation And Noise For A Long Time..
【Low Noise 】The Stepper Motor Is Housed In A High Strength Metal Casing, Which Is Robust And Durable, With Frosted Metal Side Walls For Increased Friction..
【How To Wiring The 4-Lead Wire】 Stepper Motor's Red Wire Connects To Driver's A+ Port; Stepper Motor's Green Wire Connects To Driver's A- Port; Stepper Motor's Yellow Wire Connect To Driver's B+ Port; Stepper Motor's Blue Wire Connect To Driver's B- Port..
【High Torque 】High Quality Motor Steel, Low Self-Induced Reactance In The Bearings, Good Responsiveness, Direct Linkage To The Load At Low Speeds At Near Blocked Speeds, Without Gear Reduction..
【Excellent Performance】It Has High Torque, The Stepper Motor's Power Is 15%-20% Higher Than Conventional Motors. The Circuit Board Inside The Bipolar Motor Has Been Updated To Ensure The Stability Of The Motor Structure And Achieve The Best Uniform Rotation..
Features
- 23HS9430 Motor Parameter Phase: 2 Phase; Step Angle: 1.8 degree; Frame Size: 56 x 56 x 81 mm; Shaft Diameter: 8mm; Holding Torque: 2.1Nm (308oz.in); Rated Current/phase: 3A.
- Excellent Performance It has high torque, the stepper motor's power is 15%-20% higher than conventional motors. The circuit board inside the bipolar motor has been updated to ensure the stability of the motor structure and achieve the best uniform rotation.
- Advanced Technology The motor coils are made of pure copper enamelled coils, built by advanced winding technology, with evenly distributed copper wires, not easy to get hot or burn, lower temperature rise of the motor, no deformation and noise for a long time.
- High Torque High quality motor steel, low self-induced reactance in the bearings, good responsiveness, direct linkage to the load at low speeds at near blocked speeds, without gear reduction.
- Low Noise The stepper motor is housed in a high strength metal casing, which is robust and durable, with frosted metal side walls for increased friction.
- How to wiring the 4-lead wire Stepper motor's Red wire connects to driver's A+ port; Stepper motor's GREEN wire connects to driver's A- port; Stepper motor's YELLOW wire connect to driver's B+ port; Stepper motor's BLUE wire connect to driver's B- port.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RATTMMOTOR
Weight: 2.56 pounds
See On Amazon #20
STEPPERONLINE NEMA 23 External Ball Screw Linear Stepper Motor 4.0A 76mm Stack Screw Lead 10mm(0.3937") Lead Length 200mm
Asin: B0BF9YJF8T | Model: 23E30S4004B1L5-200RS | PartNumber: 23E30S4004B1L5-200RS
Lead/Step: 0.05Mm(0.001969").
Lead Screw Length: 200Mm(7.8740").
Lead Screw Diameter: Φ12mm(0.4724").
Holding Torque: 1.8Nm(254.90Oz.In).
Features
- Nema 23 ball screw linear stepper motor
- Holding Torque: 1.8Nm(254.90oz.in)
- Lead/Step: 0.05mm(0.001969)
- Lead Screw Diameter: 12mm(0.4724)
- Lead Screw Length: 200mm(7.8740)
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
See On Amazon
Looking For Something Else?
Search