RATTMMOTOR 3pcs Nema23 Stepper Motor 23HS2430 Single Shaft 57mm 57mm 112mm Stepper Motor 2-Phase, 425oz-in, 8mm Shaft, 1.8 , 3A, 4 Lead Wire for CNC Router Milling Engraving Machine
Asin: B0C4GW3SQ2 | Model: 23HS2430-3P | PartNumber: 23HS2430-3P | Ean: 0754193411753 | UPC: 754193411753
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Advanced Technology】The Motor Coils Are Made Of Pure Copper Enamelled Coils, Built By Advanced Winding Technology, With Evenly Distributed Copper Wires, Not Easy To Get Hot Or Burn, Lower Temperature Rise Of The Motor, No Deformation And Noise For A Long Time..
【Low Noise 】The Stepper Motor Is Housed In A High Strength Metal Casing, Which Is Robust And Durable, With Frosted Metal Side Walls For Increased Friction..
【High Torque 】High Quality Motor Steel, Low Self-Induced Reactance In The Bearings, Good Responsiveness, Direct Linkage To The Load At Low Speeds At Near Blocked Speeds, Without Gear Reduction..
【Excellent Performance】It Has High Torque, The Stepper Motor's Power Is 15%-20% Higher Than Conventional Motors. The Circuit Board Inside The Bipolar Motor Has Been Updated To Ensure The Stability Of The Motor Structure And Achieve The Best Uniform Rotation..
Features
- 23HS2430 Motor Parameter Phase: 2 Phase; Step Angle: 1.8 degree; Frame Size: 57 x 57 x 112 mm; Shaft Diameter: 8mm; Holding Torque: 2.8Nm (425oz.in); Phase Resistance: 1.6ohms; Rated Current/phase: 3A; Inductance: 6.8mH+/-20%(1KHz).
- Excellent Performance It has high torque, the stepper motor's power is 15%-20% higher than conventional motors. The circuit board inside the bipolar motor has been updated to ensure the stability of the motor structure and achieve the best uniform rotation.
- Advanced Technology The motor coils are made of pure copper enamelled coils, built by advanced winding technology, with evenly distributed copper wires, not easy to get hot or burn, lower temperature rise of the motor, no deformation and noise for a long time.
- High Torque High quality motor steel, low self-induced reactance in the bearings, good responsiveness, direct linkage to the load at low speeds at near blocked speeds, without gear reduction.
- Low Noise The stepper motor is housed in a high strength metal casing, which is robust and durable, with frosted metal side walls for increased friction.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 0.00 x 2.24 inches | Weight: 10.80 pounds
See On Amazon Similar To RATTMMOTOR 3pcs Nema23 Stepper Motor
#1
Creality Official 42-40 Stepper Motor with Extruder Gear, 2 Phase 1A 1.8 Degree 0.4 N.M for 3D Printer Extruder, Compatible with E-axis of Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/CR-10 3D Printer
Asin: B09ZQT9DJY
High-Quality Stepping Motor: With Low Power, Stable Speed And Performance, Low Noise, And No Step Loss During Operation, Which Ensures The Stable Operation Of The Extrusion Mechanism..
After-Sales Service: If You Have Any Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Low Noise & High Precision: It Fits Perfectly With The High-Strength Synchronous Wheel And Synchronous Gear, Which Ensures Its High Precision, Reduces Vibration And Noise During Work, And Provides You With A Relatively Quiet Printing Environment..
Parameter: 1.8-Degree Step Angle, 0.4 N.M Holding Torque, With 1A Rated Current Per Phase. (The Connecting Cable Is Not Included.).
Features
- Official Guarantee: 100% Creality official stepper motor, our 42-40 stepper motor compatibility with Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/5 pro/5 plus/Ender 3 max/CR-10/CR-10s/CR-10 V2/CR-10V3 3D Printer.
- Parameter: 1.8-degree step angle, 0.4 N.M holding torque, with 1A rated current per phase. (The connecting cable is not included.)
- High-Quality Stepping Motor: With low power, stable speed and performance, low noise, and no step loss during operation, which ensures the stable operation of the extrusion mechanism.
- Low Noise & High Precision: It fits perfectly with the high-strength synchronous wheel and synchronous gear, which ensures its high precision, reduces vibration and noise during work, and provides you with a relatively quiet printing environment.
- After-sales Service: If you have any unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 2.36 x 1.65 x 1.65 Inches
See On Amazon #2
STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-Lead W/ 1m Cable and Connector Compatible with 3D Printer/CNC
Asin: B00PNEQKC0 | Model: 17HS19-2004S | PartNumber: 17HS19-2004S
Ean: 0701056358779, 0798167993654, 5915903798815, 0789164236554, 0715624560631, 0191579035491, 0191388825313, 0712322835252, 0190657686020
UPC: 191388825313, 798167993654, 191579035491, 701056358779, 190657686020, 712322835252, 789164236554, 715624560631
Nema 17 Bipolar 1.65"X1.65"X1.89" 4-Wire.
Rated Current 2.0A & Resistance 1.4Ohms.
Build With 39.37"( 1M) Cable And 0.1" Pitch Connector.
59Ncm(83.6Oz.In) Holding Torque.
Features
- 3D printer motor with high torque
- 59Ncm(83.6oz.in) holding torque
- NEMA 17 bipolar 1.65x1.65x1.89 4-wire
- Build with 39.37( 1m) Cable and 0.1 pitch Connector
- Rated current 2.0A & resistance 1.4ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OSM Technology Co.,Ltd.
Dimensions: 1.89 x 1.65 x 1.65 inches | Weight: 0.88 Pounds
See On Amazon #3
HiLetgo 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap Suitable for Mendel Huxley Arduino
Asin: B07BND65C8 | Model: 3-01-0108-5pcs | PartNumber: 3-01-0108-5pcs
Adjustable Current Control Lets You Set The Maximum Current Output With A Potentiometer.
Over-Temperature Thermal Shutdown, Under-Voltage Lockout, And Crossover-Current Protection.
Intelligent Chopping Control That Automatically Selects The Correct Current Decay Mode (Fast Decay Or Slow Decay).
Five Different Step Resolutions: Full-Step, Half-Step, Quarter-Step, Eighth-Step, And Sixteenth-Step. Output Drive Capacity Of Up To 35 V And ± 1.2 A.
Features
- Simple step and direction control interface,Take anti-static measures before you use the A4988 modules in case of short-circuit
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step. Output drive capacity of up to 35 V and 1.2 A
- Adjustable current control lets you set the maximum current output with a potentiometer
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #4
STEPPERONLINE Nema 17 Stepper Motor Bipolar 1.5A 42Ncm 42x42x38mm 1.8deg 4 Wires with 1m Cable and Connector (1 Pack)
Asin: B0B38GX54H | Model: 17HE15-1504S | PartNumber: 17HE15-1504S
Step Angle 1.8Deg, 200 Step/Revolution.
Low Noise High Speed 3D Printer Stepper Motor, Build With 1M Cable And Connector.
Rated Current/Phase 1.5A & Phase Resistance 2.3Ohms.
Bipolar Stepper Motor ,Dimension 42*42*38Mm, 2 Phase, 4 Leads.
Features
- Nema 17 Stepper Motor with 42Ncm holding troque
- Bipolar stepper motor ,dimension 42*42*38mm, 2 phase, 4 leads
- Step angle 1.8deg, 200 step/revolution
- Rated Current/phase 1.5A & Phase Resistance 2.3ohms
- Low noise high speed 3d printer stepper motor, build with 1m Cable and Connector
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
Dimensions: 1.65 x 1.65 x 1.65 inches | Weight: 0.62 pounds
See On Amazon #5
STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-Step Resolutions for Nema 17 and 23 Stepper Motor
Asin: B06Y5VPSFN | Model: DM542T | PartNumber: DM542T | Ean: 0715624558829, 0715776647549, 0714485410482 | UPC: 714485410482, 715624558829, 715776647549
1.0~4.2A, 20~50Vdc, 1/128 Microstep Resolution.
100% Service Satisfactory. We Provided This Stepper Motor Kit With 30 Days Free Replacement Or Refund, 1 Year Warranty And Whole Life Customer Service From The Date Of Purchasing..
Pulse Signal: 4-5V When Pul-High, 0-0.5V Whenpul-Low. The Same As Dir And Ena Signals.
Industrial-Grade Stepper Driver, Suit For Nema 17 And 23 Stepper Motor.
Features
- Stepper motor driver DM542T is updated to version V4.0, add 5V/24V logical voltage selector, alarm outputs. Please attention, Factory setting is 24V, if you need to use 5V, switch selector on the top of the driver.
- Industrial-grade Stepper Driver, Suit for Nema 17 and 23 Stepper Motor
- 1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution
- Pulse signal: 4-5V when PUL-HIGH, 0-0.5V whenPUL-LOW. The same as DIR and ENA signals
- 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing.
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OMC CORPORATION LIMITED
Dimensions: 1.00 x 0.00 x 2.97 inches | Weight: 0.46 pounds
See On Amazon #6
Creality Official 42-40 Stepper Motor, 3D Printer X/Y-Axis Extruder Stepping Motor 2 Phase 1A 1.8 Degree 0.4 N.M, Compatible with CR-10 Series and Ender-3 Series X/Y/E-axis D-Shape
Asin: B09L5M63B1 | Model: Ender-3 | PartNumber: Ender-3 | Ean: 0679628391762 | UPC: 679628391762
🆗【Low Noise Stepper Motor】The High-Quality Motor With Low Power, Uniform Speed, Stable Performance, High Accuracy, Low Noise, And No Step To Lose During The Operation, Which Ensures The Extrusion Mechanism Stable Operation. This Greatly Reduces The Vibration And Noise When The Motor Is Working, Keeps You Focused, And Provides A Quiet Printing Experience For Colleagues And Family..
👍【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly, Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
⭕【Precise Rotation】Perfectly Fits With The High-Strength Synchronous Wheel And Synchronous Gear, It Realizes Accurate Constant Ratio, Uniform Revolution, And High Transmission Efficiency, While Avoiding System Errors And Obtaining Accurate Results. Shaft Diameter: 5Mm(D-Shape).
❤【High-Quality Stepper Motor】3D Printer Motor With Low Noise And Efficient Heat Dissipation Has Large Torque And High Precision Without Losing Steps. 1.8-Degree Step Angle, 0.4N.M Holding Torque, With 1A Rated Current Per Phase. This Means That You Can Save On The Cost Of Replacing Or Repairing The Engine..
Features
- Quality security Creality 100% official, Original 42-40 stepper motor applies for E-Axis of CR 10 Max/ CR 10 Smart/ CR 10S Pro V2/ CR 30/ CR 6 Max/ CR 6 SE/ CR X/ CR X Pro/ Ender 3 Max/ Ender 3 Neo; X-Axis of CR 10 Max/ CR 10S Pro V2/ CR X/ CR X Pro; Y-Axis of CR 10 Smart/ CR 10 V2/ CR 10 V3/ CR 6 SE/ Ender 3 Max/ Ender 3 Max Neo. The connecting cable is not included!
- High-quality Stepper Motor 3D Printer motor with low noise and efficient heat dissipation has large torque and high precision without losing steps. 1.8-degree step angle, 0.4N.M holding torque, with 1A rated current per phase. This means that you can save on the cost of replacing or repairing the engine.
- Low Noise Stepper Motor The high-quality motor with low power, uniform speed, stable performance, high accuracy, low noise, and no step to lose during the operation, which ensures the extrusion mechanism stable operation. This greatly reduces the vibration and noise when the motor is working, keeps you focused, and provides a quiet printing experience for colleagues and family.
- Precise Rotation Perfectly fits with the high-strength synchronous wheel and synchronous gear, it realizes accurate constant ratio, uniform revolution, and high transmission efficiency, while avoiding system errors and obtaining accurate results. Shaft diameter: 5mm(D-shape)
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly, cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 1.57 x 1.65 x 1.65 inches | Weight: 0.64 pounds
See On Amazon #7
Creality 3D Printer 42-40 Stepper Motor, 2 Phase 1A 1.8 Degree 0.4N.M Stepper Motor for 3D Printer Extruder, Compatible with CR-10 and Ender-3 Series E Axis
Asin: B091CXPXVP | Model: KYF-3D-021 | PartNumber: KYF-3D-021 | Ean: 8424511432907
High Quality Stepping Motor: The High Quality Motor With Low Power, Smooth Speed, Stable Performance, Low Noise And No Loss During Operation, Which Ensures The Stable Operation Of The Extrusion Mechanism..
What You Get: 1X 42-40 Stepper Motor (Note: This Item Does Not Include A Connection Cable Or Screws.).
Low Noise: Stepper Motor With Low Noise Level And Efficient Heat Dissipation Has The Large Torque And High Precision Without Losing Step..
1.8 Degree Step Angle, 0.4 N.M Holding Torque, With 0.8 A Rated Current Per Phase..
Features
- Compatible: The stepper motor 42-40 applies to Eixe series Ender and CR-10 (e.g. Ender-3 / Ender 3 Pro / CR 10 / CR 10S etc.).
- 1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase.
- High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which ensures the stable operation of the extrusion mechanism.
- Low noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step.
- What You Get: 1x 42-40 Stepper Motor (Note: This item does not include a connection cable or screws.)
- See more on Amazon...
Brand: KOYOFEI | Manufacturer: KOYOFEI
Dimensions: 2.36 x 1.65 x 1.65 inches | Weight: 0.64 pounds
See On Amazon #8
STEPPERONLINE High Torque Nema 23 CNC Stepper Motor 114mm 425oz.in/3Nm CNC Mill Lathe Router
Asin: B00PNEPW4C | Model: 23HS45-4204S | PartNumber: 23HS45-4204S | Ean: 0715624558850, 0701056340255 | UPC: 701056340255, 715624558850
Nema 23 Bipolar 2.24"X2.24"X4.45" 4-Wire.
Rated Current 4.2A & Resistance 0.9Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
3Nm(425Oz.In) Holding Torque.
Features
- Very Huge Torque
- 3Nm(425oz.in) holding torque
- NEMA 23 bipolar 2.24x2.24x4.45 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 4.2A & resistance 0.9ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
Dimensions: 2.24 x 2.24 x 4.45 inches | Weight: 3.69 pounds
See On Amazon #9
STEPPERONLINE Short Body Nema 17 Bipolar Stepper Motor 1A 22.6oz.in/16Ncm DIY CNC Extruder
Asin: B00PNEQ79Q | Model: 17HS08-1004S | PartNumber: 17HS08-1004S | Ean: 5269692731844, 4139052218043, 7038557197372, 0701056346851 | UPC: 701056346851
Nema 17 Bipolar 1.65X1.65X0.79 4-Wire.
Rated Current 1.0A & Resistance 3.5Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
16Ncm(22.6Oz.In) Holding Torque.
Features
- Small Size, Short Height
- 16Ncm(22.6oz.in) holding torque
- NEMA 17 bipolar 1.65x1.65x0.79 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 1.0A & resistance 3.5ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OSM Technology Co.,Ltd.
Dimensions: 0.79 x 1.65 x 1.65 Inches
See On Amazon #10
CNC Digital Stepper Driver DM556 Stepper Motor Controller 2-phase Stepper Motor Driver 20-50V DC Max 5.6A 128 subdivision For Nema 23, 24 and Nema 34 stepper motor
Asin: B08J3NFF9V | Ean: 0791548328502 | UPC: 791548328502
Anti-Resonance For Optimal Torque, Extra Smooth Motion, Low Motor Heating And Noise.
Please Note: If There Is Any Problem, Please Feel Free To Contact Us, Each Defect Items Could Be Refunded Or Reshipped, We Will Try Out Utmost To Support You..
Package: 1Piece Dm556 Driver.
This High Subdivision Driver Is Suitable For High Subdivision Motor. Suitable For Stepper Motor: 57,60,86 Type 2-Phase (4-Wire, 6-Wire, 8-Wire).
Features
- Suitable for Nema 23 ,Nema 24 and Nema34 Stepper Motor 2-phase hybrid stepper motors (Outer diameter: 57, 60,86mm).
- This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor: 57,60,86 type 2-phase (4-wire, 6-wire, 8-wire)
- Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
- Package: 1piece DM556 driver
- PLEASE NOTE: if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you.
- See more on Amazon...
Brand: HoCenWay | Manufacturer: HONGCHENWEI
Dimensions: 1.34 x 4.41 x 2.97 inches
See On Amazon #11
EASON Stepper Motor Driver TB6600 4A DC9-42V 32 Subdivision for Nema 17, 23 Series Stepper Motor CNC Controller Single Axis Hybrid MicroStepping
Asin: B08SG7L54W | Ean: 0653871352206 | UPC: 653871352206
Suitable For Drive Two-Phase Stepping Motor Dynamic Voltage 9V To 42V, The Maximum Drive Current Is Less Than 4A..
Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
Suitable For Step Motor:Nema(17,23) 42, 57 Type 2 Phase 4 Phase (4 / 6 / 8 Wires).
The Subdivision Is Increased To 32 Subdivision, Which Is Suitable For High Subdivision..
Features
- This driver is an upgraded version of TB6600 and with plastic cover.
- The subdivision is increased to 32 subdivision, which is suitable for high subdivision.
- Suitable for drive Two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A.
- Suitable for step motor:NEMA(17,23) 42, 57 type 2 phase 4 phase (4 / 6 / 8 wires)
- Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- See more on Amazon...
Brand: Eason | Manufacturer: Yisheng Technology
Dimensions: 0.00 x 3.74 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #12
HiLetgo 5pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board for Arduino PI PIC Raspberry Pi
Asin: B00LPK0E5A | Model: 3-01-0153 | PartNumber: 3-01-0153 | Ean: 0702082654729 | UPC: 702082654729
Diameter: 28Mm.
Speed Down Stepping Motor.
Voltage: 5V.
Stepping Angle: 5.625 X 1/64.
Features
- HiLetgo Stepper Motor+ Driver Board
- Stepping angle: 5.625 X 1/64
- Diameter: 28mm
- Voltage: 5V
- Speed down stepping motor
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #13
Nema 23 Stepper Motor 4.2A 3.0Nm (425oz.in) 100mm Length with 8mm Shaft for CNC Mill Lathe Router
Asin: B081VD4C28 | Ean: 0720066769252 | UPC: 720066769252
The Most Powerful Nema 23 Stepper Motor Available. Ideal For Cnc Mill Lathe Router..
8Mm Motor Shaft..
Recommend Using Stepper Motor Driver With Voltage Of 24-50Vdc And At Least 4.2A Current..
3.0Nm (425Oz.In) Torque..
Features
- Nema 23 100mm length stepper motor.
- 3.0Nm (425oz.in) torque.
- The most powerful Nema 23 stepper motor available. Ideal for CNC Mill Lathe Router.
- Recommend using stepper motor driver with voltage of 24-50VDC and at least 4.2A current.
- 8mm motor shaft.
- See more on Amazon...
Brand: HobbyUnlimited | Manufacturer: HobbyUnlimited
Dimensions: 2.24 x 4.44 x 4.44 inches
See On Amazon #14
R REIFENG 4pcs 2M Motor Connector Cables XH2.54 4pin to XH2.0 6pin White Terminal Paralled Motor Wires for 3D Printer Stepper Motor Extension Cable
Asin: B07SLPLPL2 | Ean: 6934596032319
★High Quality For Durable And Long-Lasting Use..
★Suitable For 3D Printer Stepper Motor..
★Lightweight For Portable Installation..
★Length:2M/6.56Ft,Specification: Xh2.54 4 Pin To 6 Pin,Female White Terminal.
Features
- 2M 3D Printer Stepper Motor Cable Connector Line
- Length:2M/6.56ft,Specification: XH2.54 4 pin to 6 pin,Female White Terminal
- High quality for durable and long-lasting use.
- Lightweight for portable installation.
- Suitable for 3D Printer stepper motor.
- See more on Amazon...
Brand: R REIFENG | Manufacturer: WJ-61KL
See On Amazon #15
10 Pieces Stepper Motor Driver Module with Heat Sink Compatible with Stepstick Stepper A4988 3D Printer Reprap, CNC Machine or Robotics
Asin: B09FQ3G5XQ | Model: Photect-Driver Module-09 | PartNumber: Photect-Driver Module-09
Five-Step Resolution: There Are 5-Steps Resolution Of The Stepper Motor Drive Modules, Such As Full-Step, Half-Step, Quarter-Step, Eight-Step, Sixteen-Step, And The Output Drive Capacity Is Up To 35V And -2A~2A.
Wide Application: The Stepper Motor Drive Module Is Compatible With Stepper Motor/ 3D Printer/ Cnc/ Engraving Machine/ Supported 3D Printer And More; Please Confirm Whether The Product Model Is Suitable Before Buying.
Protection Function: The Stepper Motor Drive Modules Can Provide Thermal Shutdown Protection, Over Current Protection, Ground Fault Protection And Crossing Current Protection.
Easy To Operate: This Is A Complete Micro-Stepping Motor Driver With A Built-In Converter, Easy To Operate; When Micro-Stepping Is Running, The Chopper Control Compatible With A4988 Can Automatically Select The Current Decay Mode, Slow Or Mixed.
Features
- The package includes: you will receive 10 pieces of stepper motor drive modules and 10 heat sink in the package, enough quantity for your use and replacement
- Easy to operate: this is a complete micro-stepping motor driver with a built-in converter, easy to operate; When micro-stepping is running, the chopper control compatible with A4988 can automatically select the current decay mode, slow or mixed
- Five-step resolution: there are 5-steps resolution of the stepper motor drive modules, such as full-step, half-step, quarter-step, eight-step, sixteen-step, and the output drive capacity is up to 35V and -2A~2A
- Protection function: the stepper motor drive modules can provide thermal shutdown protection, over current protection, ground fault protection and crossing current protection
- Wide application: the stepper motor drive module is compatible with stepper motor/ 3D printer/ CNC/ engraving machine/ supported 3D printer and more; Please confirm whether the product model is suitable before buying
- See more on Amazon...
Brand: Photect | Manufacturer: Photect
See On Amazon #16
Nema 23 Stepper Motor 2.8A 1.9Nm (269oz.in) 76mm Length with 8mm Shaft for CNC Mill Lathe Route
Asin: B07Y81FF3V
8Mm Shaft..
Weight: 1.1Kg (2.4 Lb)..
Recommend Using Stepper Motor Driver With Voltage Of 24-50Vdc And At Least 3.5A Current..
2.8A 1.9Nm (269Oz.In) Torque..
Features
- Nema 23 stepper motor 76mm length.
- 2.8A 1.9Nm (269oz.in) torque.
- 8mm shaft.
- Recommend using stepper motor driver with voltage of 24-50VDC and at least 3.5A current.
- Weight: 1.1kg (2.4 lb).
- See more on Amazon...
Brand: HobbyUnlimited | Manufacturer: HobbyUnlimited
Dimensions: 3.00 x 2.50 x 2.50 Inches
See On Amazon #17
DC 5-30V 4A Stepper Motor Driver Controller Integrated Board Forward/Reverse Pulse Speed Angle Control Module PLC Serial Communication for NEMA 17 23 Motor
Asin: B0C2V4BF86 | Model: 743645935459 | PartNumber: 743645935459 | Ean: 0743645935459 | UPC: 743645935459
9 Working Modes: The Module Has Built-In Multiple Fixed Operation Modes, And Users Can Quickly Select The Appropriate Motion Trajectory To Meet Different Application Scenarios.
Lcd Display: The Lcd Screen Can Clearly Display The Speed/Delay/Cycle Time, Control The Motor With High Precision, And The Controller Parameters Support The Memory Function That Will Not Be Lost.
4 Control Mode : In Addition To Its Built-In Parameters Work Mode,It Can Also Control By External Buttons Or Others Driver Or Uart Commands.
Motor Type : Working For Dc10-30V Two Phase 4-Wire 5-Wire 6-Wire 8-Wire Stepper Motor.
Features
- 2 in 1 :This SMC02 is Stepper motor controller + stepper motor driver, which can be directly connected to the stepper motor.
- Motor Type : Working for DC10-30V Two phase 4-wire 5-wire 6-wire 8-wire stepper motor
- 9 Working Modes: The module has built-in multiple fixed operation modes, and users can quickly select the appropriate motion trajectory to meet different application scenarios
- 4 Control Mode : In addition to its built-in parameters work mode,it can also control by external buttons or others driver or UART commands
- LCD Display: The LCD screen can clearly display the speed/delay/cycle time, control the motor with high precision, and the controller parameters support the memory function that will not be lost
- See more on Amazon...
Brand: TKXEC | Manufacturer: TKXEC
See On Amazon #18
STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 178.4oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill
Asin: B00PNEPF5I | Model: 23HS22-2804S | PartNumber: 23HS22-2804S | Ean: 7241870685987, 7535001558364, 5915903798853, 0190657723350, 0714485662461, 0701056353927 | UPC: 701056353927, 714485662461, 190657723350
Nema 23 Bipolar 2.24"X2.24"X2.2" 4-Wire.
Rated Current 2.8A & Resistance 0.9Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
1.26Nm(178.4Oz.In) Holding Torque.
Features
- Higher Torque
- 1.26Nm(178.4oz.in) holding torque
- NEMA 23 bipolar 2.24x2.24x2.2 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 2.8A & resistance 0.9ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OSM Technology Co.,Ltd.
Dimensions: 2.20 x 2.24 x 2.24 inches | Weight: 1.50 pounds
See On Amazon #19
STEPPERONLINE Nema 17 Stepper Motor 2A 55Ncm Bipolar 1.8 Degree 4-Lead for 3D Printer CNC Extruder,1 Pack
Asin: B0B93HTR87 | Model: 17HE19-2004S | PartNumber: 17HE19-2004S
Step Angle 1.8Deg, 200 Step/Revolution.
Low Noise High Troque 3D Printer Stepper Motor, Build With 1M Cable And Connector.
Rated Current/Phase 2A & Phase Resistance 1.3Ohms.
Bipolar Stepper Motor ,Dimension 42*42*48Mm, 2 Phase, 4 Leads.
Features
- Nema 17 Stepper Motor with 55Ncm holding troque
- Bipolar stepper motor ,dimension 42*42*48mm, 2 phase, 4 leads
- Step angle 1.8deg, 200 step/revolution
- Rated Current/phase 2A & Phase Resistance 1.3ohms
- Low noise high troque 3d printer stepper motor, build with 1m Cable and Connector
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
Dimensions: 1.89 x 1.65 x 1.65 inches | Weight: 0.88 pounds
See On Amazon #20
Creality FDM 3D Printer Stepper Motor 42-34, 2 Phases 0.8A 1.8 Degrees 0.4 N.M 42-34 Stepper Motor for Creality Ender-3 X/Y/Z Axis and CR-10 Series Z Axis
Asin: B091D37BM2 | Ean: 8424511432891
High Quality Stepping Motor: The High Quality Motor With Low Power, Smooth Speed, Stable Performance, Low Noise And No Loss During Operation, Which Ensures The Stable Operation Of The Extrusion Mechanism..
What You Get: 1 Stepper Motor Pc 42-34 (Note: This Item Does Not Include A Connection Cable Or Screws.).
Low Noise: Stepper Motor With Low Noise Level And Efficient Heat Dissipation Has The Large Torque And High Precision Without Losing Step..
1.8 Degree Step Angle, 0.4 N.M Holding Torque, With 0.8 A Rated Current Per Phase..
Features
- Compatible: The 42-34 stepper motor is applicable to 3D printers (such as CR-10 series Z-axis or Ender-3 X / Y / Z-axis), CNC machines and equipments.
- 1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase.
- High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which ensures the stable operation of the extrusion mechanism.
- Low noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step.
- What you get: 1 stepper motor PC 42-34 (Note: This item does not include a connection cable or screws.)
- See more on Amazon...
Brand: KOYOFEI | Manufacturer: KOYOFEI
Dimensions: 1.30 x 1.65 x 1.65 Inches | Weight: 0.47 pounds
See On Amazon
Looking For Something Else?
Search