EASON Stepper Motor Driver TB6600 4A DC9-42V 32 Subdivision for Nema 17, 23 Series Stepper Motor CNC Controller Single Axis Hybrid MicroStepping
Asin: B08SG7L54W | Ean: 0653871352206 | UPC: 653871352206
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Suitable For Drive Two-Phase Stepping Motor Dynamic Voltage 9V To 42V, The Maximum Drive Current Is Less Than 4A..
Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
Suitable For Step Motor:Nema(17,23) 42, 57 Type 2 Phase 4 Phase (4 / 6 / 8 Wires).
The Subdivision Is Increased To 32 Subdivision, Which Is Suitable For High Subdivision..
Features
- This driver is an upgraded version of TB6600 and with plastic cover.
- The subdivision is increased to 32 subdivision, which is suitable for high subdivision.
- Suitable for drive Two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A.
- Suitable for step motor:NEMA(17,23) 42, 57 type 2 phase 4 phase (4 / 6 / 8 wires)
- Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- See more on Amazon...
Brand: Eason | Manufacturer: Yisheng Technology
Dimensions: 0.00 x 3.74 x 0.00 inches | Weight: 0.00 Pounds
See On Amazon Similar To EASON Stepper Motor Driver TB6600
#1
HiLetgo 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap Suitable for Mendel Huxley Arduino
Asin: B07BND65C8 | Model: 3-01-0108-5pcs | PartNumber: 3-01-0108-5pcs
Adjustable Current Control Lets You Set The Maximum Current Output With A Potentiometer.
Over-Temperature Thermal Shutdown, Under-Voltage Lockout, And Crossover-Current Protection.
Intelligent Chopping Control That Automatically Selects The Correct Current Decay Mode (Fast Decay Or Slow Decay).
Five Different Step Resolutions: Full-Step, Half-Step, Quarter-Step, Eighth-Step, And Sixteenth-Step. Output Drive Capacity Of Up To 35 V And ± 1.2 A.
Features
- Simple step and direction control interface,Take anti-static measures before you use the A4988 modules in case of short-circuit
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step. Output drive capacity of up to 35 V and 1.2 A
- Adjustable current control lets you set the maximum current output with a potentiometer
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #2
STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-Step Resolutions for Nema 17 and 23 Stepper Motor
Asin: B06Y5VPSFN | Model: DM542T | PartNumber: DM542T | Ean: 0715624558829, 0715776647549, 0714485410482 | UPC: 714485410482, 715624558829, 715776647549
1.0~4.2A, 20~50Vdc, 1/128 Microstep Resolution.
100% Service Satisfactory. We Provided This Stepper Motor Kit With 30 Days Free Replacement Or Refund, 1 Year Warranty And Whole Life Customer Service From The Date Of Purchasing..
Pulse Signal: 4-5V When Pul-High, 0-0.5V Whenpul-Low. The Same As Dir And Ena Signals.
Industrial-Grade Stepper Driver, Suit For Nema 17 And 23 Stepper Motor.
Features
- Stepper motor driver DM542T is updated to version V4.0, add 5V/24V logical voltage selector, alarm outputs. Please attention, Factory setting is 24V, if you need to use 5V, switch selector on the top of the driver.
- Industrial-grade Stepper Driver, Suit for Nema 17 and 23 Stepper Motor
- 1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution
- Pulse signal: 4-5V when PUL-HIGH, 0-0.5V whenPUL-LOW. The same as DIR and ENA signals
- 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing.
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OMC CORPORATION LIMITED
Dimensions: 1.00 x 0.00 x 2.97 inches | Weight: 0.46 Pounds
See On Amazon #3
Usongshine TB6600 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Phase Hybrid Stepper Motor for CNC/42 57 86 Stepper Motor 1 pcs)
Asin: B07HHS14VQ | Model: TB6600-4A | PartNumber: TB6600-4A | Ean: 1006410064105
✿The Largest 32 Subdivision Of The 6 Models Are Optional; Suitable For 4Wires, 6 Wires And 8 Wires Stepper Motor. It Can Control 2 Phase Stepper Motor Forward And Reverse Rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 Phase Excitation Mode..
✿Suitable For A Wide Range Of Stepping Motors Of Nema 17, 23 And 24 Can Used In Various Kinds Of Machines, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, Pick-Place Devices And So On..
✿Protect Form✿: Energy-Saving Semi-Automatic Current Lock Function, Built-In Temperature Protection And Over Current Protection, Under Voltage Protection, Preventing Reverse..
✿Stepper Motor Driver✿: 9V-42V Dc Power Supply, H Bridge Bipolar Constant Phase Flow Drive. The Maximum 4.0A Of The Eight Kinds Of Output Current..
Features
- Package included: 1 x Stepper Motor Driver.
- Stepper Motor Driver : 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current.
- The largest 32 subdivision of the 6 models are optional; Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
- Protect form : Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection, under voltage protection, Preventing reverse.
- Suitable for a wide range of stepping motors of Nema 17, 23 and 24 can used in various kinds of machines, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, pick-place devices and so on.
- See more on Amazon...
Brand: Usongshine | Manufacturer: Usongshine
Dimensions: 1.10 x 3.74 x 3.74 inches
See On Amazon #4
10 Pieces Stepper Motor Driver Module with Heat Sink Compatible with Stepstick Stepper A4988 3D Printer Reprap, CNC Machine or Robotics
Asin: B09FQ3G5XQ | Model: Photect-Driver Module-09 | PartNumber: Photect-Driver Module-09
Five-Step Resolution: There Are 5-Steps Resolution Of The Stepper Motor Drive Modules, Such As Full-Step, Half-Step, Quarter-Step, Eight-Step, Sixteen-Step, And The Output Drive Capacity Is Up To 35V And -2A~2A.
Wide Application: The Stepper Motor Drive Module Is Compatible With Stepper Motor/ 3D Printer/ Cnc/ Engraving Machine/ Supported 3D Printer And More; Please Confirm Whether The Product Model Is Suitable Before Buying.
Protection Function: The Stepper Motor Drive Modules Can Provide Thermal Shutdown Protection, Over Current Protection, Ground Fault Protection And Crossing Current Protection.
Easy To Operate: This Is A Complete Micro-Stepping Motor Driver With A Built-In Converter, Easy To Operate; When Micro-Stepping Is Running, The Chopper Control Compatible With A4988 Can Automatically Select The Current Decay Mode, Slow Or Mixed.
Features
- The package includes: you will receive 10 pieces of stepper motor drive modules and 10 heat sink in the package, enough quantity for your use and replacement
- Easy to operate: this is a complete micro-stepping motor driver with a built-in converter, easy to operate; When micro-stepping is running, the chopper control compatible with A4988 can automatically select the current decay mode, slow or mixed
- Five-step resolution: there are 5-steps resolution of the stepper motor drive modules, such as full-step, half-step, quarter-step, eight-step, sixteen-step, and the output drive capacity is up to 35V and -2A~2A
- Protection function: the stepper motor drive modules can provide thermal shutdown protection, over current protection, ground fault protection and crossing current protection
- Wide application: the stepper motor drive module is compatible with stepper motor/ 3D printer/ CNC/ engraving machine/ supported 3D printer and more; Please confirm whether the product model is suitable before buying
- See more on Amazon...
Brand: Photect | Manufacturer: Photect
See On Amazon #5
CNC Digital Stepper Driver DM556 Stepper Motor Controller 2-phase Stepper Motor Driver 20-50V DC Max 5.6A 128 subdivision For Nema 23, 24 and Nema 34 stepper motor
Asin: B08J3NFF9V | Ean: 0791548328502 | UPC: 791548328502
Anti-Resonance For Optimal Torque, Extra Smooth Motion, Low Motor Heating And Noise.
Please Note: If There Is Any Problem, Please Feel Free To Contact Us, Each Defect Items Could Be Refunded Or Reshipped, We Will Try Out Utmost To Support You..
Package: 1Piece Dm556 Driver.
This High Subdivision Driver Is Suitable For High Subdivision Motor. Suitable For Stepper Motor: 57,60,86 Type 2-Phase (4-Wire, 6-Wire, 8-Wire).
Features
- Suitable for Nema 23 ,Nema 24 and Nema34 Stepper Motor 2-phase hybrid stepper motors (Outer diameter: 57, 60,86mm).
- This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor: 57,60,86 type 2-phase (4-wire, 6-wire, 8-wire)
- Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
- Package: 1piece DM556 driver
- PLEASE NOTE: if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you.
- See more on Amazon...
Brand: HoCenWay | Manufacturer: HONGCHENWEI
Dimensions: 1.34 x 4.41 x 2.97 inches
See On Amazon #6
STEPPERONLINE CNC Digital Stepper Motor Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 and 42 Motor DM860T
Asin: B06Y68Q8ND | Model: DM860T | PartNumber: DM860T | Ean: 0715624558805, 0715624558980 | UPC: 715624558980, 715624558805
Suit For Nema 34 And 42 Stepper Motor.
Ideal Solution For Applications That Require Low-Speed Smoothness.
2.4~7.20A, 18-80Vac Or 36-110Vdc, 1/256 Microstep Resolution.
Top-Level Quality, Affordable Price, Professional Driver, Manufactured By Leadshine.
Features
- Stepper motor driver DM860T is updated to version V3.0, but New and Old versions in Amazon's warehouse are shipped randomly.
- Top-level Quality, Affordable Price, Professional Driver, Manufactured by Leadshine
- Suit for Nema 34 and 42 Stepper Motor
- 2.4~7.20A, 18-80VAC or 36-110VDC, 1/256 Microstep Resolution
- Ideal solution for applications that require low-speed smoothness
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: Leadshine Technology Co., Ltd.
Weight: 1.28 pounds
See On Amazon #7
3Pcs TB6600 4A Stepper Motor Driver 9-42V Stepper Motor Driver CNC Controller Nema tb6600 Single Axes Hybrid Stepper Motor for CNC Engraving Machine
Asin: B09Y1HVD47 | Model: 13427-1 | PartNumber: 13427-1 | Ean: 0701715531833 | UPC: 701715531833
Stepper Motor Driver Not Only With Large Area Heat Sink And Automatic Semi-Flow To Reduce Heat But Also With Overheat Circuit Protection.
Tb6600 Cnc Controller Support Interface Adopts High-Speed Optocoupler Isolation Also Protection For Overheat, Overcurrent, Undervoltage Lockout, Input Voltage Protection Against Reversal, Etc. Safer..
Tb6600 Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
Tb6600 Support Set 7 Kinds Of Subdivisions (1/2A/2B/4/8/16/32) Through 6-Bit Dip Switch, And 8 Gear Output Current (0.5A/1.0A/1.5A/2.0A/2.5A/2.8A/3.0A/3.5A).
Features
- Stepper motor driver TB6600 current and voltage: output current: 0.5A-4.0A, the maximum output current is 4.0A; input voltage: 9-42VDC, external signal 3.3-24V can be connected directly without series resistor
- TB6600 support set 7 kinds of subdivisions (1/2A/2B/4/8/16/32) through 6-bit DIP switch, and 8 gear output current (0.5A/1.0A/1.5A/2.0A/2.5A/2.8A/3.0A/3.5A)
- Stepper motor driver not only with large area heat sink and automatic semi-flow to reduce heat but also with overheat circuit protection
- TB6600 suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- TB6600 CNC Controller support interface adopts high-speed optocoupler isolation also protection for overheat, overcurrent, undervoltage lockout, input voltage protection against reversal, etc. Safer.
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
See On Amazon #8
HiLetgo 2pcs 3D Printer TMC2209 Stepper Motor Drive Module Replace TMC2208 A4988 LV8729 Super Silent
Asin: B0832SK397
Working Voltage: 3V/5V.
Configuration: Step/Dir Or Uart.
Microstepping: 256 Microstepping Subdivisions.
Drive Chip: Tmc2209.
Features
- TMC2209 Stepper Motor Drive Module
- Drive chip: TMC2209
- Working voltage: 3V/5V
- Microstepping: 256 microstepping subdivisions
- Configuration: STEP/DIR OR UART
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #9
OUYZGIA TB6600 Stepper Motor Driver 4A Stepper Driver for Nema 17, 23 and 34 Stepper Motor, 9-42V, 32 Segments, Upgraded Version-1PCS
Asin: B08PKJG2ND | Model: 200000142 | PartNumber: 200000142 | Ean: 0772985314471, 0770240308678 | UPC: 772985314471, 770240308678
Current And Voltage: Output Current: 0.5A-4.0A, The Maximum Output Current Is 4.0A. Input Voltage: 9-42Vdc, External Signal 3.3-24V Can Be Connected Directly Without Series Resistor.
High Compatibility: Suitable For All Brands Of 4/6/8 Wire 2/4 Phase Hybrid Stepper Motors. Suitable For Various Small And Medium-Sized Automation Equipment And Instruments, Such As: Engraving Machines, Marking Machines, Cutting Machines, Laser Illumination, Plotters, Cnc Machine Tools Etc.
Safe And Reliable: Overheat, Overcurrent, Undervoltage Lockout, Input Voltage Protection Against Reversal, Etc. Safer. The Current Is Automatically Halved At Standstill.
Subdivision Options: 1/2/4/8/16/32 Subdivision To Drive 4/6/8 Wire 2 Phase/4 Phase Hybrid Stepper Motors, (Current Less Than Or Equal To 4.0A). Compatible With Stepper Motors With Step Angles Of 1.8° And 0.9°.
Features
- Signal Input: Single-ended, pulse/direction. Optocoupler isolated signal input, strong anti-interference capability
- Subdivision Options: 1/2/4/8/16/32 subdivision to drive 4/6/8 wire 2 phase/4 phase hybrid stepper motors, (current less than or equal to 4.0A). Compatible with stepper motors with step angles of 1.8 and 0.9
- Current and Voltage: Output Current: 0.5A-4.0A, the maximum output current is 4.0A. Input voltage: 9-42VDC, external signal 3.3-24V can be connected directly without series resistor
- Safe and Reliable: Overheat, overcurrent, undervoltage lockout, input voltage protection against reversal, etc. Safer. The current is automatically halved at standstill
- High Compatibility: Suitable for all brands of 4/6/8 wire 2/4 phase hybrid stepper motors. Suitable for various small and medium-sized automation equipment and instruments, such as: engraving machines, marking machines, cutting machines, laser illumination, plotters, CNC machine tools etc
- See more on Amazon...
Brand: OUYZGIA | Manufacturer: OUYZGIA
See On Amazon #10
3 PCS of TB6600 Stepper Motor Driver, Abuff 5A 9-40V Nema 17 Stepper Motor Driver CNC Controller Single Axes Hybrid Stepper Motor Controls
Asin: B07GVFTHPT | Ean: 0663585692116 | UPC: 663585692116
【High Safety】Tb6600 Cnc Controller Support Interface That Adopts High-Speed Optocoupler Isolation And Protection For Input Anti-Revers，Over Current And Short Circuit..
【Work Quietly】The Cnc Controllers Are Designed With Extra-Low Motor Noise Which Can Offer Them Excellent Quietness..
【Wide Application】The Hybrid Stepper Motor Is Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
【Over-Heat Protection】Stepper Driver Is Not Only With Large Area Heat Sink And Automatic Semi-Flow To Reduce Heat But Also With Overheat Circuit Protection..
Features
- CONTROL & ADJUSTABLE TB6600 Stepper Motor Drivers support 8 kinds of current control and 7 kinds of micro steps adjustable so that can meet your different need.
- OVER-HEAT PROTECTION Stepper driver is not only with large area heat sink and automatic semi-flow to reduce heat but also with overheat circuit protection.
- HIGH SAFETY TB6600 CNC controller support interface that adopts high-speed optocoupler isolation and protection for input anti-revers over current and short circuit.
- WIDE APPLICATION The hybrid stepper motor is suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- WORK QUIETLY The CNC controllers are designed with extra-low motor noise which can offer them excellent quietness.
- See more on Amazon...
Brand: ABuff | Manufacturer: ABUFF
Weight: 0.44 Pounds
See On Amazon #11
Stepper Motor Driver TB6600 4A DC9-42V 32 Subdivision for Nema 17, 23, 24 Series Stepper Motor CNC Controller Single Axis Hybrid MicroStepping for CNC/42 57 86
Asin: B0CTCKQ3TJ
Applicable To Various Stepper Motors Of Nema 17, 23 And 24, Which Work Well With Nema Motors And Can Also Be Used In Various Machines, Such As X-Y-Z Table, Labeling Machine, Laser Cutting Machine, Engraving Machine, Picking Device, Etc..
Suitable For College Students, Engineers, Technicians, Factory Individuals, Diy Electronics Enthusiasts, Etc..
Built-In Overheat Protection, Under-Voltage Protection And Over-Current Protection, With Energy-Saving Semi-Automatic Current-Lock Function, Single-Chip Pwm Bipolar Sinusoidal Chopper Ensures Low Vibration And High Efficiency..
9V-42V Dc Power Supply, Up To 4A In 8 Output Currents, H-Bridge Bipolar Constant Phase Current Drive, Fast Operation And Easy To Connect, Suitable For Long-Term Use..
Features
- Total 32 subdivisions in 6 modes to choose, can control 2-phase stepper driver forward and reverse, smooth operation and high power.
- 9V-42V DC power supply, up to 4A in 8 output currents, H-bridge bipolar constant phase current drive, fast operation and easy to connect, suitable for long-term use.
- Applicable to various stepper motors of Nema 17, 23 and 24, which work well with Nema motors and can also be used in various machines, such as X-Y-Z table, labeling machine, laser cutting machine, engraving machine, picking device, etc.
- Built-in overheat protection, under-voltage protection and over-current protection, with energy-saving semi-automatic current-lock function, single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
- Suitable for college students, engineers, technicians, factory individuals, DIY electronics enthusiasts, etc.
- See more on Amazon...
Brand: Beffkkip | Manufacturer: Beffkkip
See On Amazon #12
4 Pack TB6600 4A 9-42V Stepper Motor Driver CNC Controller, Stepper Motor Driver Nema tb6600 Single Axes Two Phase Hybrid Stepper Motor for CNC
Asin: B07RRB6BGQ | Model: 0042 | PartNumber: 0042 | Ean: 0725756323042 | UPC: 725756323042
Energy-Saving Semi-Automatic Current Lock Function, Built-In Temperature Protection And Over Current Protection..
Only The Clock Pulse Signal Can Be Driven Two-Phase Bipolar Stepper Motor To Achieve Low Vibration, High Efficiency Work..
Can Control 2 Phase Stepper Motor Forward And Reverse Rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 Phase Excitation Mode..
The Maximum 4.0A Of The Eight Kinds Of Output Current. The Largest 32 Subdivision Of The 6 Models Are Optional..
Features
- 9V-42V DC power supply, H bridge bipolar constant phase flow drive.
- The maximum 4.0A of the eight kinds of output current. The largest 32 subdivision of the 6 models are optional.
- Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.
- Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
- Only the clock pulse signal can be driven two-phase bipolar stepper motor to achieve low vibration, high efficiency work.
- See more on Amazon...
Brand: SZCY LLC | Manufacturer: SZCY LLC
See On Amazon #13
Tofelf Stepper Motor Driver, Upgraded Version TB6600 Stepper Driver,4A 9-42V 32 Subdivision for Nema 17/23 Stepper Motor Single Axis Hybrid CNC Controller for CNC/42 57 86 Stepper Motor
Asin: B0BZYX7Z4Z | Model: TB6600 | PartNumber: TB6600 | Ean: 0760606098213 | UPC: 760606098213
✿Applicable To Various Stepper Motors Of Nema 17, 23 And 24, Which Work Well With Nema Motors And Can Also Be Used In Various Machines, Such As X-Y-Z Table, Labeling Machine, Laser Cutting Machine, Engraving Machine, Picking Device, Etc..
✿Suitable For College Students, Engineers, Technicians, Factory Individuals, Diy Electronics Enthusiasts, Etc..
✿Built-In Overheat Protection, Under-Voltage Protection And Over-Current Protection, With Energy-Saving Semi-Automatic Current-Lock Function, Single-Chip Pwm Bipolar Sinusoidal Chopper Ensures Low Vibration And High Efficiency.
✿9V-42V Dc Power Supply, Up To 4A In 8 Output Currents, H-Bridge Bipolar Constant Phase Current Drive, Fast Operation And Easy To Connect, Suitable For Long-Term Use.
Features
- Total 32 subdivisions in 6 modes to choose, can control 2-phase stepper motor forward and reverse, smooth operation and high power
- 9V-42V DC power supply, up to 4A in 8 output currents, H-bridge bipolar constant phase current drive, fast operation and easy to connect, suitable for long-term use
- Applicable to various stepper motors of Nema 17, 23 and 24, which work well with Nema motors and can also be used in various machines, such as X-Y-Z table, labeling machine, laser cutting machine, engraving machine, picking device, etc.
- Built-in overheat protection, under-voltage protection and over-current protection, with energy-saving semi-automatic current-lock function, single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency
- Suitable for college students, engineers, technicians, factory individuals, DIY electronics enthusiasts, etc.
- See more on Amazon...
Brand: Tofelf | Manufacturer: Tofelf
Dimensions: 2.80 x 3.80 x 1.10 inches | Weight: 0.11 Pounds
See On Amazon #14
RATTMMOTOR 4 Axis CNC Controller Stepper Motor Kit, Nema23 Stepper Motor 270oz-in 3A Dual Shaft with Brackets, TB6600 Stepper Motor Driver, CNC Motion Control Board Mach3 USB Card, 24V Power Supply
Asin: B09VKV26CW | Model: 4 Axis | PartNumber: 4 Axis
【Low Noise/High Torque Hybrid Stepper Motor】23Hs8430b 2-Phase Stepper Motor With Dual Shaft Diameter Of 8Mm, A Current Of 3A And An Angle Of 1.8°, Is Made Of Durable Metal On The Outside, And The Perfect Combination Of Rubber And Rotor Fills Up The Inner Space And Stabilizes The Overall Structure Of The Motor. The Coils Are Made Of Pure Copper Enameled Wire And The Torque Is Up To 270Oz-In (180N.Cm/18Kg-Cm). The Motor Runs Quietly And Doesn't Cause The Generator To Become Too Hot Over A Long Time..
【Stable Output 24V Dc Power Supply】Over-Current, Over-Voltage And Overload Protection, Power Supply Stable Power Supply, Electrical Energy Conversion Rate Of Up To 90%, Higher Efficiency. Together With The Heat Dissipation Fan Design, Shell Hollow Design, Heat Dissipation Ability Faster And Stronger, More Durable Performance..
【Usb Interface, Drive-Free Design 4-Axis Linkage Control Card】Output Pulse Frequency Of 100Khz, Using The Minimum Error Interpolation Algorithm, High Processing Accuracy. Supports Up To 4 Axes Of Linkage Control, Of Which The 4Th Axis Can Be Set As The Slave Axis. The Control Card Can Be Connected To Pc-Compatible Computers Such As Laptops, Desktops, Tablets And Other Computers With A Usb Interface. As Long As Mach3 Is Running, The Control Card Can Be Used Without Installing Any Drivers..
【Multi-Function Control Card】General-Purpose Opto-Couplers Isolation Input : Can Support The Limit Switch, Emergency Stop Switch, Auto Tool Zero, Home Switch And Electronic Handwheel; Have 0-10V Signal Output , You Can Use Mach3 Software To Control The Spindle Motor Speed; 4 General-Purpose Isolated Relay Drive Output Interface, Can Drive Four Relays For Controlling The Spindle Starts, Forward Rotating And Reverse Rotating, Pumps Or Other Device..
【Upgraded 4.5A Stepper Motor Driver】Using The Latest Tb6600 New Installation Chip, There Are Low-Voltage Shutdown, Thermal Over-Stop And Over-Current Circuit Protection, And Compared With The Tb6560 Increased Short-Circuit Protection. Tb6600 Driver Operating Voltage Of Dc 10-45Vdc, Support For Sub-Division Of The Whole Step, Half-Step, 1/4, 1/8, 1/16 Step, Up To 42/57/86 Two-Phase / Four-Phase / Four-Wire / Six-Wire Stepper Motors Within 4.2A. / Six-Wire Stepper Motor..
【Control Card And Tb6600 Driver Wiring (X-Axis As An Example) 】Driver's "Clk-" Connects To Control Card's Xp Pin , Driver's "Cw-" Connects To Control Card's Xd Pin , Driver's "5V" Connects To Control Card's 5V Pin.(The Usb Mach3 Control Card Can't Support Connection En- And En+)..
Features
- Motor and TB6600 Driver wiring Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
- Control Card and TB6600 Driver wiring (X-axis as an example) Driver's CLK- connects to control card's XP pin , Driver's CW- connects to control card's XD pin , Driver's 5V connects to control card's 5V pin.(The USB Mach3 control card can't support connection EN- and EN+).
- Low Noise/High Torque Hybrid Stepper Motor 23HS8430B 2-phase stepper motor with dual shaft diameter of 8mm, a current of 3A and an angle of 1.8 , is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
- Upgraded 4.5A Stepper Motor Driver Using the latest TB6600 new installation chip, there are low-voltage shutdown, thermal over-stop and over-current circuit protection, and compared with the TB6560 increased short-circuit protection. TB6600 driver operating voltage of DC 10-45VDC, support for sub-division of the whole step, half-step, 1/4, 1/8, 1/16 step, up to 42/57/86 two-phase / four-phase / four-wire / six-wire stepper motors within 4.2A. / six-wire stepper motor.
- USB Interface, Drive-free Design 4-Axis Linkage Control Card Output pulse frequency of 100KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.
- Multi-function control card General-purpose opto-couplers isolation input : can support the limit switch, emergency stop switch, auto tool zero, home switch and electronic handwheel; Have 0-10V signal output , you can use mach3 software to control the spindle motor speed; 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device.
- Stable output 24V DC power supply Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #15
HiLetgo 4.5A TB6600 TB6600HG Single Axis Stepper Motor Driver Controller Replace TB6560
Asin: B01N6AIEQT | Model: 3-01-1195 | PartNumber: 3-01-1195
Rated Maximum Output Reached: ¡À 4.5A.
Automatic Half Current Function.
Ize: 82Mm * 50Mm * 35Mm (L * W * H).
Operating Voltage: Dc 10V-45V.
Features
- TB6600 TB6600HG Single Axis Stepper Motor Driver Controller
- Operating voltage: DC 10V-45V
- Rated maximum output reached: 4.5A
- ize: 82mm * 50mm * 35mm (L * W * H)
- Automatic half current function
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #16
Twotrees CNC Controller Kit with Nema 23 Stepper Motor 8.0 TB6600 Stepper Motor Driver,GRBL CNC Shield Board Switch Endstop
Asin: B08XNPQXWX | Ean: 0770240309798 | UPC: 770240309798
More Compatibility Possibilities---It's A Diy Kit With Tons Of Possibilities. This Complete Cnc Kit Is Grbl Compatible And Has All The Essential Electronic Parts You Need To Setup A Cnc, Laser Engraver, Or Robot. The Kit Is Grbl Compatible (Firmware Installation Required)..
Package Included:---1* Cnc V3 ，1* Control Board ， 4* Tb6600 ， 4* Limited Switches ，4* 23Hs5628 Motor With 30Cm Wire (8Mm/6.35Mm Shaft Optional).
Professional 3D Printer Cnc Kit --- This Is A Professional 3D Printer Diy Kit With Multiple Types Of Modules Or Components You Need. It Is A Great Assortment Set For Starters And Professionals..
Premium Quality --- Each Part Of This Logrunner 3D Printer Conk Kit Was Made Of Premium Material. These Components Can Be Used In A Wide Range Of Application..
Features
- Newest CNC Shield Expansion Board V3.0 ---CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
- Premium Quality --- Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
- More Compatibility Possibilities---It's a DIY kit with tons of possibilities. This complete CNC kit is GRBL compatible and has all the essential electronic parts you need to setup a CNC, laser engraver, or robot. The kit is GRBL compatible (firmware installation required).
- Professional 3D Printer CNC Kit --- This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
- Package Included:---1* CNC V3 1* Control Board 4* TB6600 4* Limited Switches 4* 23HS5628 Motor with 30cm wire (8mm/6.35mm Shaft Optional)
- See more on Amazon...
Brand: Twotrees | Manufacturer: Twotrees
See On Amazon #17
EASON CNC Stepper Motor Driver DM542 DC20-50V 2-Phase 128 Subdivision for Nema 17, 23, 42 Series Stepper Motor CNC Controller Single Axis Hybrid MicroStepping
Asin: B08WLLJD34 | Ean: 0653871352183 | UPC: 653871352183
The Maximum Drive Subdivision Is 128, More Accurate..
Please Note: If There Is Any Problem, Please Feel Free To Contact Us, Each Defect Items Could Be Refunded Or Reshipped, We Will Try Out Utmost To Support You..
Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
Suitable For Drive Two-Phase Stepping Motor Dynamic Voltage 20V To 50V, The Maximum Drive Current Is Less Than 4.2A..
Features
- Suitable for Nema 17, Nema 23 and Nema34 Stepper Motor 2-phase hybrid stepper motors(Outer diameter: 42,57,86mm).
- Suitable for drive Two-phase stepping motor dynamic voltage 20V to 50V, the maximum drive current is less than 4.2A.
- The maximum drive subdivision is 128, more accurate.
- Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- PLEASE NOTE: if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you.
- See more on Amazon...
Brand: EASON | Manufacturer: YISHENG TECHNOLOGY
Dimensions: 1.34 x 4.65 x 3.37 inches | Weight: 0.00 Pounds
See On Amazon #18
WWZMDiB Upgraded TB6600 Stepper Motor Driver 4A Stepper Driver Controller for Nema 17/23/34 Stepper Motor 32 Segments for 42/57/86 Stepper Motor Driver (2PCS + Free Mini one-Piece Screwdriver)
Asin: B0BVB25RP2 | Ean: 0744603649098 | UPC: 744603649098
⚡ Up To 32 Segments Of Six Kinds Of Sub-Modes Available.
🥈Provide Energy Semiautomatic Current Lock Function.
🥇Built-In Thermal Protection And Overcurrent Protection.
🎵【Working Current】：9V-42V Dc Power Supply. The Maximum Output Current Of 4.0A Eight Optional.
Features
- TB6600 upgraded version 32 subdivision 42/57/86 stepper motor driver This drive is an upgraded version of the TB6600, the breakdown of heightening to 32 segments.It for high segmentation purposes. Applicable stepper motor: 42,57,86 type of 2-phase 4-phase (4-wire 6 wire line 8)
- Working current 9V-42V DC power supply. The maximum output current of 4.0A eight optional
- Up to 32 segments of six kinds of sub-modes available
- Built-in thermal protection and overcurrent protection
- Provide energy semiautomatic current lock function
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #19
A4988 Stepper Motor Driver Module for Pololu RepRap 3D Printer StepStick (Pack of 2)
Asin: B07QT7N3T2 | Ean: 0732387204992 | UPC: 732387204992
Uses Just 2 Pins From The Microcontroller, One For Controlling The Rotation Direction And The Other For Controlling The Steps.
Over-Temperature Thermal Shutdown, Under-Voltage Lockout, And Crossover-Current Protection.
8V To 35V Output Voltage Range At Up To 2A Current.
Simple Step And Direction Control Interface With Five Step Resolutions: Full-Step, Half-Step, 1/4-Step, 1/8-Step, And 1/16-Step.
Features
- Control a bipolar stepper motor at up to 2 A current per phase. An onboard potentiometer is used to adjust the current output
- Simple step and direction control interface with five step resolutions: full-step, half-step, 1/4-step, 1/8-step, and 1/16-step
- Uses just 2 pins from the microcontroller, one for controlling the rotation direction and the other for controlling the steps
- 8V to 35V output voltage range at up to 2A current
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- See more on Amazon...
Brand: Envistia | Manufacturer: Envistia Mall
Weight: 16.00 Grams
See On Amazon
Looking For Something Else?
Search