CNC Digital Stepper Driver DM556 Stepper Motor Controller 2-phase Stepper Motor Driver 20-50V DC Max 5.6A 128 subdivision For Nema 23, 24 and Nema 34 stepper motor
Asin: B08J3NFF9V | Ean: 0791548328502 | UPC: 791548328502
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Anti-Resonance For Optimal Torque, Extra Smooth Motion, Low Motor Heating And Noise.
Please Note: If There Is Any Problem, Please Feel Free To Contact Us, Each Defect Items Could Be Refunded Or Reshipped, We Will Try Out Utmost To Support You..
Package: 1Piece Dm556 Driver.
This High Subdivision Driver Is Suitable For High Subdivision Motor. Suitable For Stepper Motor: 57,60,86 Type 2-Phase (4-Wire, 6-Wire, 8-Wire).
Features
- Suitable for Nema 23 ,Nema 24 and Nema34 Stepper Motor 2-phase hybrid stepper motors (Outer diameter: 57, 60,86mm).
- This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor: 57,60,86 type 2-phase (4-wire, 6-wire, 8-wire)
- Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
- Package: 1piece DM556 driver
- PLEASE NOTE: if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you.
- See more on Amazon...
Brand: HoCenWay | Manufacturer: HONGCHENWEI
Dimensions: 1.34 x 4.41 x 2.97 inches
See On Amazon Similar To CNC Digital Stepper Driver DM556
#1
HiLetgo 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap Suitable for Mendel Huxley Arduino
Asin: B07BND65C8 | Model: 3-01-0108-5pcs | PartNumber: 3-01-0108-5pcs
Adjustable Current Control Lets You Set The Maximum Current Output With A Potentiometer.
Over-Temperature Thermal Shutdown, Under-Voltage Lockout, And Crossover-Current Protection.
Intelligent Chopping Control That Automatically Selects The Correct Current Decay Mode (Fast Decay Or Slow Decay).
Five Different Step Resolutions: Full-Step, Half-Step, Quarter-Step, Eighth-Step, And Sixteenth-Step. Output Drive Capacity Of Up To 35 V And ± 1.2 A.
Features
- Simple step and direction control interface,Take anti-static measures before you use the A4988 modules in case of short-circuit
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step. Output drive capacity of up to 35 V and 1.2 A
- Adjustable current control lets you set the maximum current output with a potentiometer
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #2
STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-Step Resolutions for Nema 17 and 23 Stepper Motor
Asin: B06Y5VPSFN | Model: DM542T | PartNumber: DM542T | Ean: 0715624558829, 0715776647549, 0714485410482 | UPC: 714485410482, 715624558829, 715776647549
1.0~4.2A, 20~50Vdc, 1/128 Microstep Resolution.
100% Service Satisfactory. We Provided This Stepper Motor Kit With 30 Days Free Replacement Or Refund, 1 Year Warranty And Whole Life Customer Service From The Date Of Purchasing..
Pulse Signal: 4-5V When Pul-High, 0-0.5V Whenpul-Low. The Same As Dir And Ena Signals.
Industrial-Grade Stepper Driver, Suit For Nema 17 And 23 Stepper Motor.
Features
- Stepper motor driver DM542T is updated to version V4.0, add 5V/24V logical voltage selector, alarm outputs. Please attention, Factory setting is 24V, if you need to use 5V, switch selector on the top of the driver.
- Industrial-grade Stepper Driver, Suit for Nema 17 and 23 Stepper Motor
- 1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution
- Pulse signal: 4-5V when PUL-HIGH, 0-0.5V whenPUL-LOW. The same as DIR and ENA signals
- 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing.
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OMC CORPORATION LIMITED
Dimensions: 1.00 x 0.00 x 2.97 inches | Weight: 0.46 Pounds
See On Amazon #3
EASON Stepper Motor Driver TB6600 4A DC9-42V 32 Subdivision for Nema 17, 23 Series Stepper Motor CNC Controller Single Axis Hybrid MicroStepping
Asin: B08SG7L54W | Ean: 0653871352206 | UPC: 653871352206
Suitable For Drive Two-Phase Stepping Motor Dynamic Voltage 9V To 42V, The Maximum Drive Current Is Less Than 4A..
Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
Suitable For Step Motor:Nema(17,23) 42, 57 Type 2 Phase 4 Phase (4 / 6 / 8 Wires).
The Subdivision Is Increased To 32 Subdivision, Which Is Suitable For High Subdivision..
Features
- This driver is an upgraded version of TB6600 and with plastic cover.
- The subdivision is increased to 32 subdivision, which is suitable for high subdivision.
- Suitable for drive Two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A.
- Suitable for step motor:NEMA(17,23) 42, 57 type 2 phase 4 phase (4 / 6 / 8 wires)
- Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- See more on Amazon...
Brand: Eason | Manufacturer: Yisheng Technology
Dimensions: 0.00 x 3.74 x 0.00 inches | Weight: 0.00 Pounds
See On Amazon #4
10 Pieces Stepper Motor Driver Module with Heat Sink Compatible with Stepstick Stepper A4988 3D Printer Reprap, CNC Machine or Robotics
Asin: B09FQ3G5XQ | Model: Photect-Driver Module-09 | PartNumber: Photect-Driver Module-09
Five-Step Resolution: There Are 5-Steps Resolution Of The Stepper Motor Drive Modules, Such As Full-Step, Half-Step, Quarter-Step, Eight-Step, Sixteen-Step, And The Output Drive Capacity Is Up To 35V And -2A~2A.
Wide Application: The Stepper Motor Drive Module Is Compatible With Stepper Motor/ 3D Printer/ Cnc/ Engraving Machine/ Supported 3D Printer And More; Please Confirm Whether The Product Model Is Suitable Before Buying.
Protection Function: The Stepper Motor Drive Modules Can Provide Thermal Shutdown Protection, Over Current Protection, Ground Fault Protection And Crossing Current Protection.
Easy To Operate: This Is A Complete Micro-Stepping Motor Driver With A Built-In Converter, Easy To Operate; When Micro-Stepping Is Running, The Chopper Control Compatible With A4988 Can Automatically Select The Current Decay Mode, Slow Or Mixed.
Features
- The package includes: you will receive 10 pieces of stepper motor drive modules and 10 heat sink in the package, enough quantity for your use and replacement
- Easy to operate: this is a complete micro-stepping motor driver with a built-in converter, easy to operate; When micro-stepping is running, the chopper control compatible with A4988 can automatically select the current decay mode, slow or mixed
- Five-step resolution: there are 5-steps resolution of the stepper motor drive modules, such as full-step, half-step, quarter-step, eight-step, sixteen-step, and the output drive capacity is up to 35V and -2A~2A
- Protection function: the stepper motor drive modules can provide thermal shutdown protection, over current protection, ground fault protection and crossing current protection
- Wide application: the stepper motor drive module is compatible with stepper motor/ 3D printer/ CNC/ engraving machine/ supported 3D printer and more; Please confirm whether the product model is suitable before buying
- See more on Amazon...
Brand: Photect | Manufacturer: Photect
See On Amazon #5
CNC Digital Microstep driver DM542 Stepper Motor Controller 2-phase Digital Stepper Motor Driver 20-50V DC Max 4.2A for Nema 17, Nema 23 and Nema 34 series stepper motor, Replace M542 M542H
Asin: B08GCFNQF2 | Ean: 0791300410032, 0791548326775 | UPC: 791548326775, 791300410032
More Informations, Please Refer To The Last Photo In This Link..
Please Note: If There Is Any Problem, Please Feel Free To Contact Us, Each Defect Items Could Be Refunded Or Reshipped, We Will Try Out Utmost To Support You..
This High Subdivision Driver Is Suitable For High Subdivision Motor. Suitable For Stepper Motor: 42,57,86 Type 2-Phase 4-Phase (4-Wire, 6-Wire, 8-Wire).
Package: 1Piece Dm542.
Features
- Suitable for Nema 17, Nema 23 and Nema34 Stepper Motor 2-phase hybrid stepper motors (Outer diameter: 42, 57,86mm).
- Package: 1piece DM542
- More informations, please refer to the last photo in this link.
- This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor: 42,57,86 type 2-phase 4-phase (4-wire, 6-wire, 8-wire)
- PLEASE NOTE: if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you.
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
Dimensions: 0.00 x 4.65 x 2.97 inches | Weight: 0.57 Pounds
See On Amazon #6
DC 5-12V/15-160V Stepper Motor Drive,PWM Adjustable Stepper Motor Controller Signal Generator Speed Regulator
Asin: B07HNSVMVH | Ean: 0713325028436 | UPC: 713325028436
To Control The Stepper Motor, Mus Connect To The Driver.
Frequency Of Measurement Can Amount Pul And Common Cathode Terminal (Gnd) Two Ports..
Pul + And Pul- Pulsed Positive And Negative; En + And En- Is To Enable The Positive And Negative Terminals; Dir + And Dir- Are The Positive And Negative Directions..
3 Frequency: High: 5.8Khz-127Khz, Mid: 590Hz-15.8Khz, Low: 82Hz-2.3Khz.
Features
- Power supply: 15-160VDC or 5-12VDC. If you are using 5-12VDC power, positive end connect DC 5-12V Input, negative end connect Common Cathode End.
- 3 Frequency: High: 5.8KHZ-127KHZ, Mid: 590HZ-15.8KHZ, Low: 82HZ-2.3KHZ
- To control the stepper motor, mus connect to the driver
- PUL + and PUL- pulsed positive and negative; EN + and EN- is to enable the positive and negative terminals; DIR + and DIR- are the positive and negative directions.
- Frequency of measurement can amount PUL and common cathode terminal (GND) two ports.
- See more on Amazon...
Brand: SYWAN | Manufacturer: Sywan
Weight: 0.11 Pounds
See On Amazon #7
Usongshine Stepper Motor Driver TB6600 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Phase Hybrid Stepper Motor for CNC/42 57 86 Stepper Motor 3 pcs)
Asin: B088CRCMP7 | Model: TB6600-3pcs | PartNumber: TB6600-3pcs | Ean: 0778107677417 | UPC: 778107677417
✿The Largest 32 Subdivision Of The 6 Models Are Optional; Suitable For 4Wires, 6 Wires And 8 Wires Stepper Motor. It Can Control 2 Phase Stepper Motor Forward And Reverse Rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 Phase Excitation Mode..
✿Suitable For A Wide Range Of Stepping Motors Of Nema 17, 23 And 24 Can Used In Various Kinds Of Machines, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, Pick-Place Devices And So On..
✿Protect Form✿: Energy-Saving Semi-Automatic Current Lock Function, Built-In Temperature Protection And Over Current Protection, Under Voltage Protection, Preventing Reverse..
✿Stepper Motor Driver✿: 9V-42V Dc Power Supply, H Bridge Bipolar Constant Phase Flow Drive. The Maximum 4.0A Of The Eight Kinds Of Output Current..
Features
- Package included :3 x Stepper Motor Driver.
- Stepper Motor Driver : 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current.
- The largest 32 subdivision of the 6 models are optional; Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
- Protect form : Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection, under voltage protection, Preventing reverse.
- Suitable for a wide range of stepping motors of Nema 17, 23 and 24 can used in various kinds of machines, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, pick-place devices and so on.
- See more on Amazon...
Brand: Usongshine | Manufacturer: Usongshine
See On Amazon #8
DC 5-30V CNC Stepper Motor Controller,PEMENOL 1/128 Micro-Step Resolution Forward Reverse Delay Time Angle Speed Adjustable Stepper Motor Control Module with HD Display Suit for Nema17/23 Motor
Asin: B0BK1GYBR1 | Model: GY20752 | PartNumber: GY20752
9 Operating States: Pemenol Stepping Motor Controller Has 9 Built-In Fixed Working Modes, Including Forward Rotation, Reverse Rotation, Delay, Cycle, Etc., So You Can Select The Working Mode More Quickly. In Addition To The Built-In Parameter Working Mode, You Can Also Control Through External Buttons Or Other Drives..
Forward And Reverse Rotation: Pemenol Stepper Motor Controller Can Change The Direction Of Motor Rotation By Pressing A Button, And You Can Also Select Two Modes, Automatic Or Manual, By Selecting The Working Mode, Which Is More Widely Used..
13 Kinds Of Menu Setting Functions: Pemenol Stepper Motor Controller Including Cycle Number, Motor Turns, Delay Time, Number Of Pulses, Forward Speed, Flip Speed, Etc. The External Buttons And Knob Encoder Make It Very Easy To Set The Parameters..
Hd Lcd Display: Pemenol Stepper Motor Controller Has A Hd Lcd Display, So You Can Read The Parameters Very Easily And Set Various Parameters More Precisely. The Module Also Has A Power Failure Memory Function To Prevent Your Parameters From Being Lost..
Various Functions: Pemenol Stepper Motor Controller Can Adjust The Angle, Speed, Direction And Delay Time Of The Motor. The Micro Stepping Resolution Can Reach 1/128, Enabling You To Control The Motor More Accurately. Note: This Product Is A Stepper Motor Controller, Which Needs To Be Used With The Driver..
Features
- CAN NOT DRIVE THE MOTOR ALONE: This module is a stepper motor controller. It CANNOT directly control the stepper motor. It needs to connect a stepper motor DRIVER(NOT INCLUDED)to control the motor.
- VARIOUS FUNCTIONS: PEMENOL stepper motor controller can adjust the angle, speed, direction and delay time of the motor. The micro stepping resolution can reach 1/128, enabling you to control the motor more accurately. NOTE: This product is a stepper motor controller, which needs to be used with the driver.
- 9 OPERATING STATES: PEMENOL stepping motor controller has 9 built-in fixed working modes, including forward rotation, reverse rotation, delay, cycle, etc., so you can select the working mode more quickly. In addition to the built-in parameter working mode, you can also control through external buttons or other drives.
- HD LCD DISPLAY: PEMENOL stepper motor controller has a HD LCD display, so you can read the parameters very easily and set various parameters more precisely. The module also has a power failure memory function to prevent your parameters from being lost.
- FORWARD AND REVERSE ROTATION: PEMENOL stepper motor controller can change the direction of motor rotation by pressing a button, and you can also select two modes, automatic or manual, by selecting the working mode, which is more widely used.
- 13 KINDS OF MENU SETTING FUNCTIONS: PEMENOL stepper motor controller including cycle number, motor turns, delay time, number of pulses, forward speed, flip speed, etc. The external buttons and knob encoder make it very easy to set the parameters.
- See more on Amazon...
Brand: PEMENOL | Manufacturer: PEMENOL
Dimensions: 1.02 x 3.11 x 1.60 inches
See On Amazon #9
ALMOCN TB6600 Stepper Motor Driver 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Hybrid Stepper Motor for CNC (3pcs)
Asin: B09Y5G5YMS | Ean: 0701715475670 | UPC: 701715475670
Can Control 2 Phase Stepper Motor Forward And Reverse Rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 Phase Excitation Mode..
Application:Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
Over-Heat Protection:Stepper Motor Driver Not Only With Large Area Heat Sink And Automatic Semi-Flow,But Also With Overheat Circuit Protection..
The Largest 32 Subdivision Of The 6 Models Are Optional; Suitable For 4Wires, 6 Wires And 8 Wires Stepper Motor..
Features
- H bridge bipolar constant phase flow drive,9V-42V DC power supply.The maximum 4.0A of the eight kinds of output current.
- The largest 32 subdivision of the 6 models are optional; Suitable for 4Wires, 6 wires and 8 wires stepper motor.
- Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
- Over-Heat Protection:Stepper motor driver not only with large area heat sink and automatic semi-flow,but also with overheat circuit protection.
- Application:Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- See more on Amazon...
Brand: ALMOCN | Manufacturer: ALMOCN
See On Amazon #10
RATTMMOTOR 4 Axis CNC Controller Stepper Motor Kit, Nema23 Stepper Motor 270oz-in 3A Dual Shaft with Brackets, TB6600 Stepper Motor Driver, CNC Motion Control Board Mach3 USB Card, 24V Power Supply
Asin: B09VKV26CW | Model: 4 Axis | PartNumber: 4 Axis
【Low Noise/High Torque Hybrid Stepper Motor】23Hs8430b 2-Phase Stepper Motor With Dual Shaft Diameter Of 8Mm, A Current Of 3A And An Angle Of 1.8°, Is Made Of Durable Metal On The Outside, And The Perfect Combination Of Rubber And Rotor Fills Up The Inner Space And Stabilizes The Overall Structure Of The Motor. The Coils Are Made Of Pure Copper Enameled Wire And The Torque Is Up To 270Oz-In (180N.Cm/18Kg-Cm). The Motor Runs Quietly And Doesn't Cause The Generator To Become Too Hot Over A Long Time..
【Stable Output 24V Dc Power Supply】Over-Current, Over-Voltage And Overload Protection, Power Supply Stable Power Supply, Electrical Energy Conversion Rate Of Up To 90%, Higher Efficiency. Together With The Heat Dissipation Fan Design, Shell Hollow Design, Heat Dissipation Ability Faster And Stronger, More Durable Performance..
【Usb Interface, Drive-Free Design 4-Axis Linkage Control Card】Output Pulse Frequency Of 100Khz, Using The Minimum Error Interpolation Algorithm, High Processing Accuracy. Supports Up To 4 Axes Of Linkage Control, Of Which The 4Th Axis Can Be Set As The Slave Axis. The Control Card Can Be Connected To Pc-Compatible Computers Such As Laptops, Desktops, Tablets And Other Computers With A Usb Interface. As Long As Mach3 Is Running, The Control Card Can Be Used Without Installing Any Drivers..
【Multi-Function Control Card】General-Purpose Opto-Couplers Isolation Input : Can Support The Limit Switch, Emergency Stop Switch, Auto Tool Zero, Home Switch And Electronic Handwheel; Have 0-10V Signal Output , You Can Use Mach3 Software To Control The Spindle Motor Speed; 4 General-Purpose Isolated Relay Drive Output Interface, Can Drive Four Relays For Controlling The Spindle Starts, Forward Rotating And Reverse Rotating, Pumps Or Other Device..
【Upgraded 4.5A Stepper Motor Driver】Using The Latest Tb6600 New Installation Chip, There Are Low-Voltage Shutdown, Thermal Over-Stop And Over-Current Circuit Protection, And Compared With The Tb6560 Increased Short-Circuit Protection. Tb6600 Driver Operating Voltage Of Dc 10-45Vdc, Support For Sub-Division Of The Whole Step, Half-Step, 1/4, 1/8, 1/16 Step, Up To 42/57/86 Two-Phase / Four-Phase / Four-Wire / Six-Wire Stepper Motors Within 4.2A. / Six-Wire Stepper Motor..
【Control Card And Tb6600 Driver Wiring (X-Axis As An Example) 】Driver's "Clk-" Connects To Control Card's Xp Pin , Driver's "Cw-" Connects To Control Card's Xd Pin , Driver's "5V" Connects To Control Card's 5V Pin.(The Usb Mach3 Control Card Can't Support Connection En- And En+)..
Features
- Motor and TB6600 Driver wiring Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
- Control Card and TB6600 Driver wiring (X-axis as an example) Driver's CLK- connects to control card's XP pin , Driver's CW- connects to control card's XD pin , Driver's 5V connects to control card's 5V pin.(The USB Mach3 control card can't support connection EN- and EN+).
- Low Noise/High Torque Hybrid Stepper Motor 23HS8430B 2-phase stepper motor with dual shaft diameter of 8mm, a current of 3A and an angle of 1.8 , is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
- Upgraded 4.5A Stepper Motor Driver Using the latest TB6600 new installation chip, there are low-voltage shutdown, thermal over-stop and over-current circuit protection, and compared with the TB6560 increased short-circuit protection. TB6600 driver operating voltage of DC 10-45VDC, support for sub-division of the whole step, half-step, 1/4, 1/8, 1/16 step, up to 42/57/86 two-phase / four-phase / four-wire / six-wire stepper motors within 4.2A. / six-wire stepper motor.
- USB Interface, Drive-free Design 4-Axis Linkage Control Card Output pulse frequency of 100KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.
- Multi-function control card General-purpose opto-couplers isolation input : can support the limit switch, emergency stop switch, auto tool zero, home switch and electronic handwheel; Have 0-10V signal output , you can use mach3 software to control the spindle motor speed; 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device.
- Stable output 24V DC power supply Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #11
Tofelf CNC Digital Stepper Driver DM556 Stepper Motor DM556 DC20-50V 5.6A 2-Phase 128 Subdivision for Nema17/23/34/42/57 Stepper Motors
Asin: B0C136YLX4 | Ean: 0760606098220 | UPC: 760606098220
Product Design Bipolar Constant Current Pwm Drive Output, Good Operation, High Repeatability, Low Speed, Zero Vibration, Low Noise, Can Be Widely Used In Automatic Packaging Machines, Engraving Machines And Other Automation Equipment.
Applicable People Suitable For College Students, Engineers, Technicians, Factory Individuals, Diy Electronic Enthusiasts, Etc..
Subdivision The Maximum Drive Subdivision Is 128, More Accurate.
Adaptable Models Practical, Can Be Adapted To Nema17 Nema23 Nema34 Nema42 Nema57 Stepper Motor.
Features
- Current 24V-50V DC power supply, output current adjustable 1.0A-5.6A
- Adaptable models Practical, can be adapted to Nema17 Nema23 Nema34 Nema42 Nema57 stepper motor
- Product design Bipolar constant current PWM drive output, good operation, high repeatability, low speed, zero vibration, low noise, can be widely used in automatic packaging machines, engraving machines and other automation equipment
- Subdivision The maximum drive subdivision is 128, more accurate
- Applicable people Suitable for college students, engineers, technicians, factory individuals, DIY electronic enthusiasts, etc.
- See more on Amazon...
Brand: Tofelf | Manufacturer: Tofelf
See On Amazon #12
STEPPERONLINE DM556T Digital Stepper Driver 1.8~5.6A 20-50VDC for Nema 23, 24 Stepper Motor
Asin: B074TBMC7N | Model: DM556T | PartNumber: DM556T | Ean: 0715776786842, 0715624558744 | UPC: 715776786842, 715624558744
Suit For 23 And 24 Stepper Motor.
Professional Driver, Manufactured By Leadshine.
Features
- Top-level Quality, Affordable Price
- Professional Driver, Manufactured by Leadshine
- Suit for 23 and 24 Stepper Motor
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: Leadshine Technology Co., Ltd.
Dimensions: 50.00 x 100.00 x 100.00 Centimeters | Weight: 0.66 Pounds
See On Amazon #13
STEPPERONLINE CNC Digital Stepper Motor Driver 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 and 42 Motor DM860T
Asin: B06Y68Q8ND | Model: DM860T | PartNumber: DM860T | Ean: 0715624558805, 0715624558980 | UPC: 715624558980, 715624558805
Suit For Nema 34 And 42 Stepper Motor.
Ideal Solution For Applications That Require Low-Speed Smoothness.
2.4~7.20A, 18-80Vac Or 36-110Vdc, 1/256 Microstep Resolution.
Top-Level Quality, Affordable Price, Professional Driver, Manufactured By Leadshine.
Features
- Stepper motor driver DM860T is updated to version V3.0, but New and Old versions in Amazon's warehouse are shipped randomly.
- Top-level Quality, Affordable Price, Professional Driver, Manufactured by Leadshine
- Suit for Nema 34 and 42 Stepper Motor
- 2.4~7.20A, 18-80VAC or 36-110VDC, 1/256 Microstep Resolution
- Ideal solution for applications that require low-speed smoothness
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: Leadshine Technology Co., Ltd.
Weight: 1.28 Pounds
See On Amazon #14
3 PCS of TB6600 Stepper Motor Driver, Abuff 5A 9-40V Nema 17 Stepper Motor Driver CNC Controller Single Axes Hybrid Stepper Motor Controls
Asin: B07GVFTHPT | Ean: 0663585692116 | UPC: 663585692116
【High Safety】Tb6600 Cnc Controller Support Interface That Adopts High-Speed Optocoupler Isolation And Protection For Input Anti-Revers，Over Current And Short Circuit..
【Work Quietly】The Cnc Controllers Are Designed With Extra-Low Motor Noise Which Can Offer Them Excellent Quietness..
【Wide Application】The Hybrid Stepper Motor Is Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
【Over-Heat Protection】Stepper Driver Is Not Only With Large Area Heat Sink And Automatic Semi-Flow To Reduce Heat But Also With Overheat Circuit Protection..
Features
- CONTROL & ADJUSTABLE TB6600 Stepper Motor Drivers support 8 kinds of current control and 7 kinds of micro steps adjustable so that can meet your different need.
- OVER-HEAT PROTECTION Stepper driver is not only with large area heat sink and automatic semi-flow to reduce heat but also with overheat circuit protection.
- HIGH SAFETY TB6600 CNC controller support interface that adopts high-speed optocoupler isolation and protection for input anti-revers over current and short circuit.
- WIDE APPLICATION The hybrid stepper motor is suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- WORK QUIETLY The CNC controllers are designed with extra-low motor noise which can offer them excellent quietness.
- See more on Amazon...
Brand: ABuff | Manufacturer: ABUFF
Weight: 0.44 Pounds
See On Amazon #15
D-FLIFE 2pcs DM556 CNC Digital Stepper Motor Driver 2-Phase Stepper Motor Driver 20-50V DC Max 5.6A 128 Subdivision for Nema 23, 24 and Nema 34 Stepper Motor
Asin: B0C8TMZMZ5 | Ean: 0701715474154 | UPC: 701715474154
Suitable For Nema 17, Nema 23 And Nema34 Stepper Motor，2-Phase Hybrid Stepper Motors (Outer Diameter: 42,57,66Mm).
Used For All Kinds Of Small And Medium-Sized Automation Equipment And Instruments: Engraving Machine, Marking Machine, Cutting Machine, Laser Typesetting, Plotter, Cnc Machine Tools, Automatic Assembly Equipment, Etc..
Two Phase Hybrid Stepper Motor Of Various Types With Peak Current Below 4.2A And Outer Diameter 42-66Mm Is Provided.
Dm556 Is A New Generation Of High Performance Digital Stepping Driver Based On 32-Bit Dsp Technology.
Features
- DM556 Stepper Motor Driver: Input Voltage: DC 20-50V; Output Current: 1.0-5.6A, 8 Level Adjustable, 0.5A Resolution
- DM556 is a New Generation of High Performance Digital Stepping Driver Based On 32-Bit DSP Technology
- Suitable for Nema 17, Nema 23 and Nema34 Stepper Motor 2-Phase Hybrid Stepper Motors (Outer Diameter: 42,57,66mm)
- Two Phase Hybrid Stepper Motor of Various Types with Peak Current Below 4.2A and Outer Diameter 42-66MM is Provided
- Used for All Kinds of Small and Medium-Sized Automation Equipment and Instruments: Engraving Machine, Marking Machine, Cutting Machine, Laser Typesetting, Plotter, CNC Machine Tools, Automatic Assembly Equipment, etc.
- See more on Amazon...
Brand: D-FLIFE | Manufacturer: D-FLIFE
See On Amazon #16
HiLetgo 2pcs 3D Printer TMC2209 Stepper Motor Drive Module Replace TMC2208 A4988 LV8729 Super Silent
Asin: B0832SK397
Working Voltage: 3V/5V.
Configuration: Step/Dir Or Uart.
Microstepping: 256 Microstepping Subdivisions.
Drive Chip: Tmc2209.
Features
- TMC2209 Stepper Motor Drive Module
- Drive chip: TMC2209
- Working voltage: 3V/5V
- Microstepping: 256 microstepping subdivisions
- Configuration: STEP/DIR OR UART
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #17
HiLetgo 2pcs A3967 Stepper Motor Drive Board EasyDriver Stepper Motor Driver for Arduino Raspberry Pi Robot
Asin: B00WSNZEBM | Model: 3-01-0831 | PartNumber: 3-01-0831 | Ean: 0702949574979 | UPC: 702949574979
The Easydriver Has An On Board Voltage Regulator For The Digital Interface That Can Be Set To 5V Or 3.3V..
Easydriver Drives Bi-Polar Motors, And Motors Wired As Bi-Polar. I.E. 4,6, Or 8 Wire Stepper Motors..
Connect A 4-Wire Stepper Motor And A Microcontroller And You've Got Precision Motor Control..
Easydriver Requires A 7V To 30V Supply To Power The Motor And Can Power Any Voltage Of Stepper Motor..
Features
- The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
- EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.
- The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V.
- Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control.
- EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #18
0.5-4A 9-40V DC CNC Stepper Motor Driver 32 Micro-step Resolutions Step Controller Module Board for Nema 8, 11, 14, 16, 17 Stepper Motor
Asin: B07FXLRQ47 | Ean: 0792172849197 | UPC: 792172849197
Seven Kind Of Micro-Steps(1, 2/A, 2/B, 4, 8, 16, 32) Are Adjustable..
Input Voltage Anti-Reverse Protection. Over Heat, Over Current And Short Circuit Protection..
Large Area Heat Sink Can Effectively Dissipate Heat. Automatic Half Current Reduces Heat..
The Current(0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) Is Selected By The Dialing Switch..
Features
- 0.5~4A, 9~42V DC, 32 micro step, suit for Nema 8, 11, 14, 16 and 17 Stepper Motor.
- The current(0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) is selected by the dialing switch.
- Seven kind of micro-steps(1, 2/A, 2/B, 4, 8, 16, 32) are adjustable.
- Large area heat sink can effectively dissipate heat. Automatic half current reduces heat.
- Input voltage anti-reverse protection. Over heat, over current and short circuit protection.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 1.18 x 3.94 x 3.15 inches
See On Amazon #19
4 Pack TB6600 4A 9-42V Stepper Motor Driver CNC Controller, Stepper Motor Driver Nema tb6600 Single Axes Two Phase Hybrid Stepper Motor for CNC
Asin: B07RRB6BGQ | Model: 0042 | PartNumber: 0042 | Ean: 0725756323042 | UPC: 725756323042
Energy-Saving Semi-Automatic Current Lock Function, Built-In Temperature Protection And Over Current Protection..
Only The Clock Pulse Signal Can Be Driven Two-Phase Bipolar Stepper Motor To Achieve Low Vibration, High Efficiency Work..
Can Control 2 Phase Stepper Motor Forward And Reverse Rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 Phase Excitation Mode..
The Maximum 4.0A Of The Eight Kinds Of Output Current. The Largest 32 Subdivision Of The 6 Models Are Optional..
Features
- 9V-42V DC power supply, H bridge bipolar constant phase flow drive.
- The maximum 4.0A of the eight kinds of output current. The largest 32 subdivision of the 6 models are optional.
- Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.
- Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
- Only the clock pulse signal can be driven two-phase bipolar stepper motor to achieve low vibration, high efficiency work.
- See more on Amazon...
Brand: SZCY LLC | Manufacturer: SZCY LLC
See On Amazon
Looking For Something Else?
Search