rf Detector Module rf Amplifier Bagima AD8302 LF 2.7G RF IF Phase Detection Impedance Analysis Module 7x7x4
Asin: B0C5XTP11Z | Model: Bagima3dr6yh8w1q | PartNumber: Bagima3dr6yh8w1q
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Measures Gain Loss And Phase Up To 2.7 Ghz,Small Signal Envelope Bandwidth From Dc To 30 Mhz, Rf Detector.
Application: Rf Detector Module Is Applicable For Rf If Pa L Ization, E Rf Power Control, Rf Amplifier, Remote System Monito And Diagn , Return Loss Vswr Urement, Ac Signal Logarithmic Ratio Function..
Measures Gain Loss And Phase Up To 2.7 Ghz, Rf Detector Module.
Easily Used: Accurate Phase Measurement Scaling 10Mv Degree Measurement Controller Level Com Or Modes Operates From Supply Voltages Of 3.3V 5V Stable 1.8 V Reference Voltage, Rf Amplifier, Rf Detector Module.
Features
- Multi function :This phase detector module remote system monito and diagnostics, return Loss VSWR urements and log ratio function for AC .
- EASILY USED: Accurate Phase Measurement Scaling 10mV Degree Measurement Controller Level Com or Modes Operates from Supply Voltages of 3.3v 5V Stable 1.8 V Reference Voltage, rf amplifier, rf detector module
- Measures Gain Loss and Phase up to 2.7 GHz,small Signal Envelope Bandwidth from DC to 30 MHz, rf detector
- Measures Gain Loss and Phase up to 2.7 GHz, rf detector module
- Application: RF detector module is applicable for RF IF PA l ization, e RF power control, rf amplifier, remote system monito and diagn , return loss VSWR urement, AC signal logarithmic ratio function.
- See more on Amazon...
Brand: Bagima | Manufacturer: Bagima
See On Amazon Similar To rf Detector Module rf Amplifier
#1
Gikfun Digital 38khz Ir Receiver Ir Transmitter Sensor Module Kit for Arduino (Pack of 3 Sets) EK8477
Asin: B0816P2545 | Model: gdagre-802 | PartNumber: gdagre-802 | Ean: 8002124223855
It Is Suitable For Infrared Communication, Infrared Remote Control, Apply To A Variety Of Platforms Including Arduino/51/Avr/Arm.
Pin Definitions: (1) Output (2) Vcc (3) Gnd.
With Signal Indicating Led, Easy To Observe And Debug..
This Ir Transmitter Sensor Module Is Directly Launched By A Single Tube, It Requires Waveform Modulation Through The Program..
Features
- Note: The white smudge is not corrosion damage, it's flux, can wipe it off with a rag, does not affect the use of the module
- This ir transmitter sensor module is directly launched by a single tube, it requires waveform modulation through the program.
- It is suitable for infrared communication, infrared remote control, apply to a variety of platforms including Arduino/51/AVR/ARM
- With signal indicating LED, easy to observe and debug.
- Pin Definitions: (1) Output (2) Vcc (3) GND
- See more on Amazon...
Brand: Gikfun | Manufacturer: Esooho
See On Amazon #2
Dorhea 4Pcs Digital 38khz Ir Receiver Sensor Module + 4Pcs 38khz Ir Transmitter Sensor Module Kit for Electronic Building Block
Asin: B08X2MFS6S | Model: 13658-1 | PartNumber: 13658-1 | Ean: 0701715461482 | UPC: 701715461482
With The Emission Signal Indicator Led, Easy To Observe And Debug..
Widely Used In Infrared Communication, Infrared Remote Control, Apply To A Variety Of Platforms Including For Raspberry Pi/51/Avr/Arm..
Can Be Used For Remoter Control,Can Be Compatible With Wrobot Digital 38Khz Ir Transmitter Sensor..
Adopt 1838 Remote Control Receiver With High Sensitivity..
Features
- The infrared transmitter module is directly transmitted by a single tube, and the waveform needs to be modulated by the program.
- Adopt 1838 remote control receiver with high sensitivity.
- with the emission signal indicator LED, easy to observe and debug.
- Can be used for remoter control,Can be compatible with wrobot digital 38KHz IR transmitter sensor.
- Widely used in infrared communication, infrared remote control, apply to a variety of platforms including for Raspberry pi/51/AVR/ARM.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #3
Teyleten Robot IR Infrared Slotted Optical Optocoupler Module Speed Measuring Sensor 3.3V to 5V Photo Interrupter Sensor for Arduino 10pcs
Asin: B08977QFK5 | Ean: 8424515612220
For Other Main Control Boards Or Higher-Level Main Control Boards (Such As Arm), If You Need To Set The I/O Port To Input/Output Mode, You Must Set It To Input Mode/Receive Mode, Otherwise It Cannot Be Used. 51 Series Mcu Can Be Used Directly, No Need To Set Input And Output Mode.
Note: For Arduino Players Should Set The Mcu's I/O Port To Input Mode/Receive Mode, Otherwise It Cannot Be Used..
2. Gnd Gnd Is The Negative Input Port Of The Power Supply. Out Out Is The Signal Output Port, Which Is Connected To The I/O Port Of The Single-Chip Microcomputer. Generally, It Is Connected To An External Interrupt..
Features
- use: 1. +5 +5 is the positive input port of the power supply, which can be connected to a voltage of 3.3V~5V
- 2. GND GND is the negative input port of the power supply. OUT OUT is the signal output port, which is connected to the I/O port of the single-chip microcomputer. Generally, it is connected to an external interrupt.
- For other main control boards or higher-level main control boards (such as Arm), if you need to set the I/O port to input/output mode, you must set it to input mode/receive mode, otherwise it cannot be used. 51 series MCU can be used directly, no need to set input and output mode
- Note: For Arduino players should set the MCU's I/O port to input mode/receive mode, otherwise it cannot be used.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #4
Deegoo-FPV New 12pcs NRF24L01+ 2.4GHz Arduino Wireless RF Transceiver Module
Asin: B07GZ17ZWS | Model: 8541549611 | PartNumber: 8541549611 | Ean: 0608603912067 | UPC: 608603912067
Built-In Hardware Crc Error Detection, Multipoint Communication Address Control. Built-In 2.4Ghz Antenna..
Applications: Wireless Peripherals, Remote Control Systems Such As Rc Vehicles And Consumer Remote Electronics, Wireless Voice Transmission Such As Voip, Wireless Sensor Networks, Wireless Networks, Home And Commercial Automation..
Nrf24l01 Is A Single Chip Radio Transceiver For The Worldwide 2.4 - 2.5 Ghz Ism Band. Compatible With Arduino And Raspberry Pi..
125 Communications Channels, Multi-Point Communication And Frequency Hopping To Meet The Communication Needs..
Features
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
- 125 Communications channels, Multi-point communication and frequency hopping to meet the communication needs.
- Built-in hardware CRC error detection, Multipoint communication address control. Built-in 2.4Ghz antenna.
- nRF24L01 is a single chip radio transceiver for the worldwide 2.4 - 2.5 GHz ISM band. Compatible with Arduino and Raspberry Pi.
- Applications: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation.
- See more on Amazon...
Brand: Deegoo-FPV | Manufacturer: Deegoo-FPV
See On Amazon #5
QIACHIP Wireless 433Mhz RF Module Receiver and Transmitter Remote Control Built-in Learning Code 1527 Decoding 4 Channel Output (Transmitter and Receiver kit)
Asin: B06ZZ1Z6R7 | Model: rx480e tx118sa | PartNumber: rx480e tx118sa | Ean: 6954901211130
· Superheterodyne.
If You Have Any Questions About The Product, Please Contact The Seller In Time. If There Is Any Problem With The Product Quality, We Will Protect Your Interests From Damage.
· Small Size.
· Application Environment: Remote Control Switch, Receiver Module, Motorcycles, Automobile Anti-Theft Products, Home Security Products, Electric Doors, Remote Control Socket, Remote Control Led, Garage Door Remote Control, Remote Control Door Opener, Remote Control Curtains, Alarm Host, Remote Control Mp3..
Features
- Multiple working modes : Momentary Mode, Toggle Mode, Latched mode
- Application environment: Remote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, remote control socket, remote control LED, garage door remote control, remote control door opener, remote control curtains, alarm host, remote control MP3.
- Superheterodyne
- Small size
- If you have any questions about the product, please contact the seller in time. If there is any problem with the product quality, we will protect your interests from damage
- See more on Amazon...
Brand: QIACHIP | Manufacturer: Shenzhen Keshilian Electronic Technology Co., Ltd
Dimensions: 0.39 x 1.10 x 0.71 Inches
See On Amazon #6
Low Noise Amplifier Module, 20dB High Gain LNA Metal 0.1MHz6GHz Full Band RF Amplifier SMA Female Head for Remote Control Receiver for FM Radio (Shipped with Built in Battery)
Asin: B0BGZ1GZBC | Model: LBECpk1h8gi596-11 | PartNumber: LBECpk1h8gi596-11 | Ean: 7614913681541
Bias Power Supply: The Battery-Free Version Requires Bias Tee Bias Power Supply, Some Devices Have A Bias Power Supply Function, For Example: For Sdrplay 1A.
What You Get: 1 Lna + 1 Usb Cable + 24-Hour Customer Email Service + 100% Satisfaction Guarantee + Fast Delivery. If At Any Time You Are Not Satisfied With Our Product, Please Feel Free To Contact Us.
Wide Range Of Applications: Low-Noise Rf Amplifiers Have Excellent Performance, Good Uniformity, And High Reliability. Suitable For Short Wave, Fm Radio, Remote Control Receiver, Cable Tv Signal Amplifier, Etc.
Stable Performance: The Rf Amplifier Has Ultra-Wide Bandwidth, High Reliability, And Is Not Easy To Corrode And Fall Off. Wide Frequency Range, High Gain, Low Noise Figure, Unconditionally Stable Amplifier Module.
Features
- PROFESSIONAL AMPLIFIER: High linearity, ultra-low noise gain block amplifier. High linearity: +35dBm output IP3; high input power durability, +22dBm continuous wave
- STABLE PERFORMANCE: The RF amplifier has ultra-wide bandwidth, high reliability, and is not easy to corrode and fall off. Wide Frequency Range, High Gain, Low Noise Figure, Unconditionally Stable Amplifier Module
- BIAS POWER SUPPLY: The battery-free version requires Bias Tee bias power supply, some devices have a bias power supply function, for example: for sdrplay 1A
- WIDE RANGE OF APPLICATIONS: Low-noise RF amplifiers have excellent performance, good uniformity, and high reliability. Suitable for short wave, FM radio, remote control receiver, cable TV signal amplifier, etc
- WHAT YOU GET: 1 LNA + 1 USB cable + 24-hour customer email service + 100% satisfaction guarantee + fast delivery. If at any time you are not satisfied with our product, please feel free to contact us
- See more on Amazon...
Brand: LBEC | Manufacturer: LBEC
See On Amazon #7
Proster EMF Meter, 3in1 Digital Electromagnetic Field Radiation Detector for EF RF MF,5G Cell Tower, WiFi Signal Detector, for Home&Office EMF Inspections, and Ghost Hunting
Asin: B0CF5CGK94
【Applicable Crowd】Can Be Used For Ghost Hunting, A Must-Have For Anyone Interested In Paranormal Phenomena. As Well As Office Workers, Pregnant Women And The Elderly Who Need To Detect Electrical Radiation For Their Health..
【What You Get】1 * Emf Meter, 1 * 9V Battery, And 1 * User Manual，1 *Storage Bag. It Is Equipped With A Built-In Electromagnetic Radiation Sensor, Which Can Display The Radiation Value On An Lcd Screen After Processing By The Micro-Control Chip. You Can Make Reasonable Processing Or Take Effective Prevention Measures Toward Electromagnetic Radiation According To The Test Result..
【Multifunction】 Large And Back-Light Lcd Is Clear For Viewing. Auto Power Off After 15 Minutes Without Operation. Sound And Light Warnings To Remind You Of The Safe Range..
【Scenes To Be Used】Rf Function Can Detect 5G Signal And Radio Frequency Up To 10Ghz, Ef, And Mf Functions Can Measure Electromagnetic Radiation Emitted By Household Appliances Such As Tv, Induction Cooker, Rice Cooker, Refrigerator, Computers, Wires, Etc..
Features
- PRECISE MEASUREMENT EMF Meter is an electric field (EF), magnetic field (MF), and radio frequency field (RF) 3-in-1 multifunctional meter. Resolution:RF: 0.01mW/m , EF: 1V/m , MF: 0.1mG/0.1 TRange:RF: 0.01~1800 mW/m , EF: 1~1999V/mMF: 0.1~999.9 mG/0.01~99.99 T.
- SCENES TO BE USED RF function can detect 5G signal and radio frequency up to 10Ghz, EF, and MF functions can measure electromagnetic radiation emitted by household appliances such as TV, induction cooker, rice cooker, refrigerator, computers, wires, etc.
- APPLICABLE CROWD Can be used for ghost hunting, a must-have for anyone interested in paranormal phenomena. As well as office workers, pregnant women and the elderly who need to detect electrical radiation for their health.
- MULTIFUNCTION Large and back-light LCD is clear for viewing. Auto power off after 15 minutes without operation. Sound and light warnings to remind you of the safe range.
- WHAT YOU GET 1 * EMF Meter, 1 * 9v battery, and 1 * User manual 1 *Storage bag. It is equipped with a built-in electromagnetic radiation sensor, which can display the radiation value on an LCD screen after processing by the micro-control chip. You can make reasonable processing or take effective prevention measures toward electromagnetic radiation according to the test result.
- See more on Amazon...
Brand: Proster | Manufacturer: Proster Trading Limited
See On Amazon #8
5-3500MHz RF WideBand Amplifier 20dB High Gain Low Noise LNA Amplifier with Shielding Shell
Asin: B07PRHL246 | Ean: 0703633904362 | UPC: 703633904362
Main Purpose：It Is Especially Suitable For All Kinds Of Radio Frequency Receiving Front-End Circuit To Extend Communication Distance.
Add Shielding Shell：The Broadband Low Noise Rf Amplifier Is Designed With Shielding Shell.
Great Performance：It Has Stable Gain 20Db Typical, And Small Noise Figure 1.3Db Typical.
Features
- Wide measure frequency This amplifier has a wide frequency range of 5-3500MHz, and large dynamic range +20dBm@1dBP
- Great performance It has stable gain 20dB typical, and small noise figure 1.3dB typical
- Main purpose It is especially suitable for all kinds of radio frequency receiving front-end circuit to extend communication distance
- Add shielding shell The broadband low noise RF amplifier is designed with shielding shell
- See more on Amazon...
Brand: AYMARIO | Manufacturer: AYMARIO
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.02 Pounds
See On Amazon #9
KOOBOOK 2Pcs Digital 38KHz Infrared IR Receiver Sensor Module for Arduino Compatible
Asin: B07S66T3WT | Model: KB053 | PartNumber: KB053 | Ean: 0682559865943 | UPC: 682559865943
With 1838 Remote Control Receiver, The Sensitivity Is High..
2 Fixing Holes For Easy Installation, Aperture 3.1Mm, Pcb Size: 23.5*21.5Mm..
Operating Voltage 5V, Digital Output, With Data Indicator..
It Will Be Also Easy To Make Your Own Ir Controller Using Ir Transmitter..
Features
- IR is widely used in remote control. With this IR receiver, the Arduino project is able to receive command from any IR remoter controller if you have the right decoder.
- It will be also easy to make your own IR controller using IR transmitter.
- With 1838 remote control receiver, the sensitivity is high.
- Operating voltage 5V, digital output, with data indicator.
- 2 fixing holes for easy installation, aperture 3.1mm, PCB size: 23.5*21.5mm.
- See more on Amazon...
Brand: KOOBOOK | Manufacturer: KOOBOOK
Warranty: NO
See On Amazon #10
EC Buying 10PCS IR Infrared Sensor Module Slotted Optical Optocoupler Speed Measuring Sensor Module Photo Interrupter Sensor Motor Speed Detection Robot for Arduino
Asin: B0CHDRF497
Using Schmidt Trigger To Jitter Pulses Is Very Stable And Can Be Used For Small Car Speed Measurement, Distance Measurement, And Other Applications!.
Working Voltage: 3.3V-5V, Output Form: Digital Switch Output (0 And 1).
Install Holes With M3 Screws At Both Ends..
As Long As A Non-Transparent Object Passes Through The Slot, It Can Trigger To Output A Low Ttl Level..
Features
- Adopting a slot type photoelectric sensor, it consists of an infrared light-emitting diode and an NPN photoelectric transistor, with a slot width of 5.9mm.
- As long as a non-transparent object passes through the slot, it can trigger to output a low TTL level.
- Using Schmidt trigger to jitter pulses is very stable and can be used for small car speed measurement, distance measurement, and other applications!
- Install holes with M3 screws at both ends.
- Working voltage: 3.3V-5V, output form: digital switch output (0 and 1)
- See more on Amazon...
Brand: EC Buying | Manufacturer: EC Buying
See On Amazon
Looking For Something Else?
Search