FLIPSKY 75100 Pro with Aluminum PCB Based on VESC for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B0C69D7RWB | Ean: 0768481808750 | UPC: 768481808750
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Programmable：Based On Vesc, Programmable Via Vesc_Tool With Overheat And Overcurrent Protection..
Top Service: If There Are Any Question Or Need Help , Just Feel Free Contact Us , We Will Always Here Help You Out Within 24 Hours..
Widely Applications:E-Skateboard,Ebike,Scooter,Robot Etc.
Please Be Careful To Limit The Absolute Maximum Current Below 250A,Setting Page.
More Powerful :Voltage:14-84V (4-20S) ，Max Current:120A,Erpm:150000 .Provide Your Electric Skateboard With More Powerful Power And A More Exciting Modification Experience..
Support Bldc Square Wave Mode Control And Foc Sine Wave Mode.
Features
- 75100 Pro Size: L103mm*W58mm*H27.7mm
- Support BLDC square wave mode control and FOC sine wave mode
- Programmable Based on VESC, programmable via vesc_tool with overheat and overcurrent protection.
- More powerful :Voltage:14-84V (4-20S) Max Current:120A,ERPM:150000 .Provide your electric skateboard with more powerful power and a more exciting modification experience.
- Widely applications:e-skateboard,ebike,scooter,robot etc
- Please be careful to limit the Absolute Maximum Current below 250A,setting page
- Top Service: If there are any question or need help , just feel free contact us , we will always here help you out within 24 hours.
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: Flipsky
Warranty: 6m
See On Amazon Similar To FLIPSKY 75100 Pro with Aluminum
#1
FLIPSKY 75100 Pro V2.0 with Aluminum PCB with Key Switch Based on VESC for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B0CNLJ6ML3 | Model: 75100 pro V2.0 | PartNumber: 75100 pro V2.0 | Ean: 0768481810555 | UPC: 768481810555
Support Bldc Square Wave Mode Control And Foc Sine Wave Mode.
Programmable: Yes;Regenerative Capacity: Yes;Phase Filter: Yes.
Supported Sensors:Abi，Hall，As5047，As5048a.
Input Set Support:Ppm，Adc，Nrf,Uart.
Control Interface Ports:Usb,Can,Uart.
Voltage:14-84V (4-20S);Current:100A Continuous;Bec:5V@1.5A.
Features
- Size: L103mm*W58mm*H27.7mm
- Voltage:14-84V (4-20S);Current:100A Continuous;BEC:5V@1.5A
- Support BLDC square wave mode control and FOC sine wave mode
- Control Interface Ports:USB,CAN,UART
- Supported Sensors:ABI HALL AS5047 AS5048A
- Input Set Support:PPM ADC NRF,UART
- Programmable: Yes;Regenerative Capacity: Yes;Phase Filter: Yes
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: Flipsky
Weight: 0.99 Pounds
Warranty: 2m
See On Amazon #2
FLIPSKY 75100 FOC 75V 100A Single ESC with Aluminum PCB Based on VESC for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B09J4SV7G5 | Model: 75100 | PartNumber: 75100 | Ean: 0768111516505 | UPC: 768111516505
Rich Interfaces:Two Comm Ports, Uart Bluetooth Module, Imu,Screen Display Or Remote Controller Supportable..
Two Comm Ports, Uart Bluetooth Module, Imu,Screen Display Or Remote Controller Supportable..
Fs75100*1Pcs;Usb Cable*1Pcs;Hall Sensor Adapter (6Pins)*1Pcs;Manual*1Pcs..
Widely Applications:E-Skateboard,Ebike,Scooter,Robot Etc.Flipsky Quality Produce..
Warm Tips:It Is Recommended To Keep Firmware 5.2 From Factory Ship, The New Firmware Upgrade May Damage The Esc..
More Powerful :Voltage:14-84V (4-20S) ，Max Current:120A,Erpm:150000 .Provide Your Electric Skateboard With More Powerful Power And A More Exciting Modification Experience.
Please Turn Off The Phase Filter Function And Choose "False" In Vesc_Tool When Use Firmware Version On Or Above 5.3 (Vesc_Tool 3.01). Without Turning Off The Phase Filter Will Result In Esc Damage. Please Do Not Restore The Default Parameters When Using The Wizard Interface..
Programmable：Based On Vesc, Programmable Via Vesc_Tool With Overheat And Overcurrent Protection..
Features
- Durable:The aluminum alloy shell is waterproof and dustproof to a certain extent, which can hold the VESC circuit board more safely.
- Programmable Based on VESC, programmable via vesc_tool with overheat and overcurrent protection.
- Rich Interfaces:Two COMM ports, UART bluetooth module, IMU,screen display or remote controller supportable.
- More powerful :Voltage:14-84V (4-20S) Max Current:120A,ERPM:150000 .Provide your electric skateboard with more powerful power and a more exciting modification experience
- Widely applications:e-skateboard,ebike,scooter,robot etc.Flipsky quality produce.
- Warm tips:It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
- Two COMM ports, UART bluetooth module, IMU,screen display or remote controller supportable.
- FS75100*1pcs;USB cable*1pcs;Hall sensor adapter (6pins)*1pcs;Manual*1pcs.
- Please turn off the phase filter function and choose false in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface.
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: flipsky
Dimensions: 1.33 x 3.35 x 2.00 inches | Weight: 0.44 Pounds
Warranty: 6M
See On Amazon #3
Flipsky Electric Speed Controller for Skateboard FSESC6.7 70A Base on ESC6.6 with Aluminum Anodized Heat Sink
Asin: B09MJZ8JRW | Model: VESC-Single-Mini-V6.7 | PartNumber: VESC-Single-Mini-V6.7 | Ean: 0768492259497 | UPC: 768492259497
Safer & Protection Functions: Low Voltage Protection, High Voltage Protection, Over-Current Protection, Temperature Abnormally Protection, Mosfets Over-Temperature Protection..
Flipsky Quality Produce And Good Service For You.
Widely Applications:E-Skateboard,Ebike,Scooter,Robot Etc.
Upgrade Performance:Latest Version Firmware,Support Rich Control Interface And Sensors,Programmable.
Features
- More Control Modes:Support four control modes: Current/Dutycycle/Speed /Position control mode.
- Upgrade Performance:Latest Version Firmware,support rich control interface and sensors,programmable
- Safer & Protection functions: low voltage protection, high voltage protection, over-current protection, temperature abnormally protection, mosfets over-temperature protection.
- Widely applications:e-skateboard,ebike,scooter,robot etc
- Flipsky quality produce and good service for you
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: FLIPSKY
Dimensions: 0.75 x 2.64 x 1.54 inches | Weight: 0.09 Pounds
See On Amazon #4
FLIPSKY 75100 FOC 75V 200A Dual ESC with Aluminum PCB for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B0B5JVN35B | Model: 75100 Dual ESC | PartNumber: 75100 Dual ESC | Ean: 0768481805339 | UPC: 768481805339
More Powerful :Voltage:14-84V (4-20S) ，Max Current:200A,Erpm:150000 .Provide Your Electric Skateboard With More Powerful Power And A More Exciting Modification Experience..
Warm Tips: It Is Recommended To Keep Firmware 5.2 From Factory Ship, The New Firmware Upgrade May Damage The Esc.. Please Be Careful To Limit The Absolute Maximum Current Below 250A..
Top Service: If There Are Any Question Or Need Help , Just Feel Free Contact Us , We Will Always Here Help You Out Within 24 Hours..
Supported Sensors:Abi，Hall，As5047，As5048a.
Wire Size: 12Awg Programmable: Yes Regenerative Capacity: Yes.
Features
- Support BLDC square wave mode control and FOC sine wave mode
- Wire Size: 12AWG Programmable: Yes Regenerative Capacity: Yes
- More powerful :Voltage:14-84V (4-20S) Max Current:200A,ERPM:150000 .Provide your electric skateboard with more powerful power and a more exciting modification experience.
- Supported Sensors:ABI HALL AS5047 AS5048A
- Warm tips: It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.. Please be careful to limit the Absolute Maximum Current below 250A.
- Top Service: If there are any question or need help , just feel free contact us , we will always here help you out within 24 hours.
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: Flipsky
Dimensions: 4.05 x 4.21 x 0.73 inches | Weight: 0.71 pounds
See On Amazon #5
FLIPSKY 75200 Pro V2.0 with Aluminum PCB with Key Switch Based on VESC for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B0CNLBQ25W | Ean: 0768481810371 | UPC: 768481810371
Support The Function Of Balancing Car By Connecting The Imu Module Through The.
75200 Pro V2.0 Aluminum Substrate Single Drive: Supports Single Serial Port Function,And Integrates Bluetooth Module Function (Convenient To Connect Bluetooth Parameters And Read Data In Real Time),And Built With Power On/Off Switch..
Firmware: 6.02, Supports Firmware Upgrade,Voltage: 14-84V (Safe For 4-20S),Continuous Current: 50V/200A; 75V/150A (Values Depend On The Mounting.
Aluminum Pcb With Good Heat Dissipation To Expand Life Span..
Support Various Control Modes: Current / Duty Cycle / Speed / Pid Control Modes..
Features
- Adjustable protection against: low voltage protection, high voltage protection,over current protection, temperature abnormal protection, mosfets / motor over temperature protection.
- Support various control modes: Current / Duty cycle / Speed / PID control modes.
- Support the function of balancing car by connecting the IMU module through the
- Aluminum PCB with good heat dissipation to expand life span.
- 75200 Pro V2.0 aluminum substrate single drive: supports single serial port function,and integrates Bluetooth module function (convenient to connect Bluetooth parameters and read data in real time),and built with power on/off switch.
- Firmware: 6.02, supports firmware upgrade,Voltage: 14-84V (safe for 4-20S),Continuous current: 50V/200A; 75V/150A (Values depend on the mounting
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: Flipsky
Weight: 0.66 Pounds
Warranty: 2m+
See On Amazon #6
FLIPSKY 75100 Pro V2.0 with Aluminum PCB with Power Button Based on VESC for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B0CNLDHTNN | Ean: 0768481810463 | UPC: 768481810463
Supported Sensors:Abi，Hall，As5047，As5048a,Support Bldc Square Wave Mode Control And Foc Sine Wave Mode.
Wire Size: 10Awg(75100 Pro);Programmable: Yes;Regenerative Capacity: Yes;Phase Filter: Yes;Power Switch Button: Red.
Aluminum Pcb With Good Heat Dissipation To Expand Life Span..
Adjustable Protection Against: Low Voltage Protection, High Voltage Protection,Over Current Protection, Temperature Abnormal Protection, Mosfets / Motor Over Temperature Protection..
Features
- Firmware: 6.02 (firmware update supported),Size: L103mm*W58mm*H27.7mm
- Adjustable protection against: low voltage protection, high voltage protection,over current protection, temperature abnormal protection, mosfets / motor over temperature protection.
- Supported Sensors:ABI HALL AS5047 AS5048A,Support BLDC square wave mode control and FOC sine wave mode
- Aluminum PCB with good heat dissipation to expand life span.
- Wire Size: 10AWG(75100 Pro);Programmable: Yes;Regenerative Capacity: Yes;Phase Filter: Yes;Power Switch Button: Red
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: Flipsku
Weight: 0.66 Pounds
Warranty: 2m+
See On Amazon #7
FLIPSKY 75200 Pro V2.0 with Aluminum PCB with Power Button Based on VESC for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B0CNCXCWB5 | Ean: 0768481810289 | UPC: 768481810289
Support The Function Of Balancing Car By Connecting The Imu Module Through The.
75200 Pro V2.0 Aluminum Substrate Single Drive: Supports Single Serial Port Function,And Integrates Bluetooth Module Function (Convenient To Connect Bluetooth Parameters And Read Data In Real Time),And Built With Power On/Off Switch..
Firmware: 6.02, Supports Firmware Upgrade,Voltage: 14-84V (Safe For 4-20S),Continuous Current: 50V/200A; 75V/150A (Values Depend On The Mounting.
Aluminum Pcb With Good Heat Dissipation To Expand Life Span..
Support Various Control Modes: Current / Duty Cycle / Speed / Pid Control Modes..
Features
- Adjustable protection against: low voltage protection, high voltage protection,over current protection, temperature abnormal protection, mosfets / motor over temperature protection.
- Support various control modes: Current / Duty cycle / Speed / PID control modes.
- Support the function of balancing car by connecting the IMU module through the
- Aluminum PCB with good heat dissipation to expand life span.
- 75200 Pro V2.0 aluminum substrate single drive: supports single serial port function,and integrates Bluetooth module function (convenient to connect Bluetooth parameters and read data in real time),and built with power on/off switch.
- Firmware: 6.02, supports firmware upgrade,Voltage: 14-84V (safe for 4-20S),Continuous current: 50V/200A; 75V/150A (Values depend on the mounting
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: Flipsky
Weight: 0.66 Pounds
Warranty: 2m+
See On Amazon #8
FLIPSKY 75200 Pro 84V High Current with Aluminum PCB Based on VESC for Fighting Robot Surfboard AGV Robot
Asin: B0C69B93Q6 | Ean: 0768481808668 | UPC: 768481808668
Safer & Protection Functions: Low Voltage Protection, High Voltage Protection, Over-Current Protection, Temperature Abnormally Protection, Mosfets Over-Temperature Protection..
75200 Pro Size:130X67.7X39..4Mm.Communication Ports: Usb, Can, Uart, Spi, Iic.
Widely Applications:E-Skateboard,Ebike,Scooter,Robot Etc.
Upgrade Performance:Latest Version Firmware,Support Rich Control Interface And Sensors,Programmable.
Features
- Continuous current: 50V/200A; 75V/150A (Values depend on the mounting, ambient temperature and air/water circulation around the device!); Burst: 300A
- Upgrade Performance:Latest Version Firmware,support rich control interface and sensors,programmable
- Safer & Protection functions: low voltage protection, high voltage protection, over-current protection, temperature abnormally protection, mosfets over-temperature protection.
- Widely applications:e-skateboard,ebike,scooter,robot etc
- 75200 Pro Size:130x67.7x39..4mm.Communication Ports: USB, CAN, UART, SPI, IIC
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: Flipsky
Weight: 0.66 Pounds
Warranty: 6m
See On Amazon #9
FLIPSKY 75100 FOC 75V 100A Single ESC with Aluminum PCB for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B0B4G199S3 | Model: 75100 Aluminum PCB | PartNumber: 75100 Aluminum PCB | Ean: 0768481805247 | UPC: 768481805247
Supported Sensors:Abi，Hall，As5047，As5048a.
Firmware: Latest (Firmware Update Supported). Please Be Careful To Limit The Absolute Maximum Current Below 250A..
Top Service: If There Are Any Question Or Need Help , Just Feel Free Contact Us , We Will Always Here Help You Out Within 24 Hours..
More Powerful :Voltage:14-84V (4-20S) ，Max Current:120A,Erpm:150000 .Provide Your Electric Skateboard With More Powerful Power And A More Exciting Modification Experience..
Programmable：Based On Vesc, Programmable Via Vesc_Tool With Overheat And Overcurrent Protection..
Features
- Support BLDC square wave mode control and FOC sine wave mode
- Programmable Based on VESC, programmable via vesc_tool with overheat and overcurrent protection.
- Supported Sensors:ABI HALL AS5047 AS5048A
- More powerful :Voltage:14-84V (4-20S) Max Current:120A,ERPM:150000 .Provide your electric skateboard with more powerful power and a more exciting modification experience.
- Firmware: latest (firmware update supported). Please be careful to limit the Absolute Maximum Current below 250A.
- Top Service: If there are any question or need help , just feel free contact us , we will always here help you out within 24 hours.
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: Flipsky
See On Amazon #10
FLIPSKY 75200 FOC 84V High Current Single ESC with Aluminum PCB for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B0BBRQ85H8 | Ean: 0768481806770 | UPC: 768481806770
▶Voltage: 14-84V (Safe For 4-20S).Support Various Control Modes: Current / Duty Cycle / Speed / Pid Control Modes..
▶Warm Tips: It Is Recommended To Keep Firmware 5.2 From Factory Ship, The New Firmware Upgrade May Damage The Esc..
▶Communication Ports: Usb, Can, Uart, Spi, Iic Supported Sensors: Abi, Hall, As5047, As5048a Input Source Support: Ppm, Adc, Nrf, Uart.
▶Continuous Current: 50V/200A; 75V/150A (Values Depend On The Mounting, Ambient Temperature And Air/Water Circulation Around The Device!); Burst: 300A.
Features
- Use aluminum alloy case for better heat dissipation effect,which makes ESC more durable.
- Continuous current: 50V/200A; 75V/150A (Values depend on the mounting, ambient temperature and air/water circulation around the device!); Burst: 300A
- Voltage: 14-84V (safe for 4-20S).Support various control modes: Current / Duty cycle / Speed / PID control modes.
- Communication Ports: USB, CAN, UART, SPI, IIC Supported Sensors: ABI, HALL, AS5047, AS5048A Input Source Support: PPM, ADC, NRF, UART
- Warm tips: It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: FLIPSKY
Warranty: 6m
See On Amazon
Looking For Something Else?
Search