FLIPSKY 75100 Pro V2.0 with Aluminum PCB with Key Switch Based on VESC for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B0CNLJ6ML3 | Model: 75100 pro V2.0 | PartNumber: 75100 pro V2.0 | Ean: 0768481810555 | UPC: 768481810555
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Support Bldc Square Wave Mode Control And Foc Sine Wave Mode.
Programmable: Yes;Regenerative Capacity: Yes;Phase Filter: Yes.
Supported Sensors:Abi,Hall,As5047,As5048a.
Input Set Support:Ppm,Adc,Nrf,Uart.
Control Interface Ports:Usb,Can,Uart.
Voltage:14-84V (4-20S);Current:100A Continuous;Bec:5V@1.5A.
Features
- Size: L103mm*W58mm*H27.7mm
- Voltage:14-84V (4-20S);Current:100A Continuous;BEC:5V@1.5A
- Support BLDC square wave mode control and FOC sine wave mode
- Control Interface Ports:USB,CAN,UART
- Supported Sensors:ABI HALL AS5047 AS5048A
- Input Set Support:PPM ADC NRF,UART
- Programmable: Yes;Regenerative Capacity: Yes;Phase Filter: Yes
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: Flipsky
Weight: 0.99 pounds
Warranty: 2m
See On Amazon Similar To FLIPSKY 75100 Pro V2.0 with
#1
FLIPSKY 75100 Pro with Aluminum PCB Based on VESC for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B0C69D7RWB | Ean: 0768481808750 | UPC: 768481808750
Programmable:Based On Vesc, Programmable Via Vesc_Tool With Overheat And Overcurrent Protection..
Top Service: If There Are Any Question Or Need Help , Just Feel Free Contact Us , We Will Always Here Help You Out Within 24 Hours..
Widely Applications:E-Skateboard,Ebike,Scooter,Robot Etc.
Please Be Careful To Limit The Absolute Maximum Current Below 250A,Setting Page.
More Powerful :Voltage:14-84V (4-20S) ,Max Current:120A,Erpm:150000 .Provide Your Electric Skateboard With More Powerful Power And A More Exciting Modification Experience..
Support Bldc Square Wave Mode Control And Foc Sine Wave Mode.
Features
- 75100 Pro Size: L103mm*W58mm*H27.7mm
- Support BLDC square wave mode control and FOC sine wave mode
- Programmable Based on VESC, programmable via vesc_tool with overheat and overcurrent protection.
- More powerful :Voltage:14-84V (4-20S) Max Current:120A,ERPM:150000 .Provide your electric skateboard with more powerful power and a more exciting modification experience.
- Widely applications:e-skateboard,ebike,scooter,robot etc
- Please be careful to limit the Absolute Maximum Current below 250A,setting page
- Top Service: If there are any question or need help , just feel free contact us , we will always here help you out within 24 hours.
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: Flipsky
Warranty: 6m
See On Amazon #2
FLIPSKY 75100 FOC 75V 100A Single ESC with Aluminum PCB Based on VESC for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B09J4SV7G5 | Model: 75100 | PartNumber: 75100 | Ean: 0768111516505 | UPC: 768111516505
Rich Interfaces:Two Comm Ports, Uart Bluetooth Module, Imu,Screen Display Or Remote Controller Supportable..
Two Comm Ports, Uart Bluetooth Module, Imu,Screen Display Or Remote Controller Supportable..
Fs75100*1Pcs;Usb Cable*1Pcs;Hall Sensor Adapter (6Pins)*1Pcs;Manual*1Pcs..
Widely Applications:E-Skateboard,Ebike,Scooter,Robot Etc.Flipsky Quality Produce..
Warm Tips:It Is Recommended To Keep Firmware 5.2 From Factory Ship, The New Firmware Upgrade May Damage The Esc..
More Powerful :Voltage:14-84V (4-20S) ,Max Current:120A,Erpm:150000 .Provide Your Electric Skateboard With More Powerful Power And A More Exciting Modification Experience.
Please Turn Off The Phase Filter Function And Choose "False" In Vesc_Tool When Use Firmware Version On Or Above 5.3 (Vesc_Tool 3.01). Without Turning Off The Phase Filter Will Result In Esc Damage. Please Do Not Restore The Default Parameters When Using The Wizard Interface..
Programmable:Based On Vesc, Programmable Via Vesc_Tool With Overheat And Overcurrent Protection..
Features
- Durable:The aluminum alloy shell is waterproof and dustproof to a certain extent, which can hold the VESC circuit board more safely.
- Programmable Based on VESC, programmable via vesc_tool with overheat and overcurrent protection.
- Rich Interfaces:Two COMM ports, UART bluetooth module, IMU,screen display or remote controller supportable.
- More powerful :Voltage:14-84V (4-20S) Max Current:120A,ERPM:150000 .Provide your electric skateboard with more powerful power and a more exciting modification experience
- Widely applications:e-skateboard,ebike,scooter,robot etc.Flipsky quality produce.
- Warm tips:It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
- Two COMM ports, UART bluetooth module, IMU,screen display or remote controller supportable.
- FS75100*1pcs;USB cable*1pcs;Hall sensor adapter (6pins)*1pcs;Manual*1pcs.
- Please turn off the phase filter function and choose false in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface.
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: flipsky
Dimensions: 1.33 x 3.35 x 2.00 inches | Weight: 0.44 Pounds
Warranty: 6M
See On Amazon #3
FLIPSKY 75100 FOC 75V 200A Dual ESC with Aluminum PCB for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B0B5JVN35B | Model: 75100 Dual ESC | PartNumber: 75100 Dual ESC | Ean: 0768481805339 | UPC: 768481805339
More Powerful :Voltage:14-84V (4-20S) ,Max Current:200A,Erpm:150000 .Provide Your Electric Skateboard With More Powerful Power And A More Exciting Modification Experience..
Warm Tips: It Is Recommended To Keep Firmware 5.2 From Factory Ship, The New Firmware Upgrade May Damage The Esc.. Please Be Careful To Limit The Absolute Maximum Current Below 250A..
Top Service: If There Are Any Question Or Need Help , Just Feel Free Contact Us , We Will Always Here Help You Out Within 24 Hours..
Supported Sensors:Abi,Hall,As5047,As5048a.
Wire Size: 12Awg Programmable: Yes Regenerative Capacity: Yes.
Features
- Support BLDC square wave mode control and FOC sine wave mode
- Wire Size: 12AWG Programmable: Yes Regenerative Capacity: Yes
- More powerful :Voltage:14-84V (4-20S) Max Current:200A,ERPM:150000 .Provide your electric skateboard with more powerful power and a more exciting modification experience.
- Supported Sensors:ABI HALL AS5047 AS5048A
- Warm tips: It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.. Please be careful to limit the Absolute Maximum Current below 250A.
- Top Service: If there are any question or need help , just feel free contact us , we will always here help you out within 24 hours.
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: Flipsky
Dimensions: 4.05 x 4.21 x 0.73 inches | Weight: 0.71 Pounds
See On Amazon #4
FLIPSKY 75200 Pro V2.0 with Aluminum PCB with Key Switch Based on VESC for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B0CNLBQ25W | Ean: 0768481810371 | UPC: 768481810371
Support The Function Of Balancing Car By Connecting The Imu Module Through The.
75200 Pro V2.0 Aluminum Substrate Single Drive: Supports Single Serial Port Function,And Integrates Bluetooth Module Function (Convenient To Connect Bluetooth Parameters And Read Data In Real Time),And Built With Power On/Off Switch..
Firmware: 6.02, Supports Firmware Upgrade,Voltage: 14-84V (Safe For 4-20S),Continuous Current: 50V/200A; 75V/150A (Values Depend On The Mounting.
Aluminum Pcb With Good Heat Dissipation To Expand Life Span..
Support Various Control Modes: Current / Duty Cycle / Speed / Pid Control Modes..
Features
- Adjustable protection against: low voltage protection, high voltage protection,over current protection, temperature abnormal protection, mosfets / motor over temperature protection.
- Support various control modes: Current / Duty cycle / Speed / PID control modes.
- Support the function of balancing car by connecting the IMU module through the
- Aluminum PCB with good heat dissipation to expand life span.
- 75200 Pro V2.0 aluminum substrate single drive: supports single serial port function,and integrates Bluetooth module function (convenient to connect Bluetooth parameters and read data in real time),and built with power on/off switch.
- Firmware: 6.02, supports firmware upgrade,Voltage: 14-84V (safe for 4-20S),Continuous current: 50V/200A; 75V/150A (Values depend on the mounting
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: Flipsky
Weight: 0.66 Pounds
Warranty: 2m+
See On Amazon #5
FLIPSKY 75100 Pro V2.0 with Aluminum PCB with Power Button Based on VESC for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B0CNLDHTNN | Ean: 0768481810463 | UPC: 768481810463
Supported Sensors:Abi,Hall,As5047,As5048a,Support Bldc Square Wave Mode Control And Foc Sine Wave Mode.
Wire Size: 10Awg(75100 Pro);Programmable: Yes;Regenerative Capacity: Yes;Phase Filter: Yes;Power Switch Button: Red.
Aluminum Pcb With Good Heat Dissipation To Expand Life Span..
Adjustable Protection Against: Low Voltage Protection, High Voltage Protection,Over Current Protection, Temperature Abnormal Protection, Mosfets / Motor Over Temperature Protection..
Features
- Firmware: 6.02 (firmware update supported),Size: L103mm*W58mm*H27.7mm
- Adjustable protection against: low voltage protection, high voltage protection,over current protection, temperature abnormal protection, mosfets / motor over temperature protection.
- Supported Sensors:ABI HALL AS5047 AS5048A,Support BLDC square wave mode control and FOC sine wave mode
- Aluminum PCB with good heat dissipation to expand life span.
- Wire Size: 10AWG(75100 Pro);Programmable: Yes;Regenerative Capacity: Yes;Phase Filter: Yes;Power Switch Button: Red
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: Flipsku
Weight: 0.66 Pounds
Warranty: 2m+
See On Amazon #6
FLIPSKY 75200 Pro V2.0 with Aluminum PCB with Power Button Based on VESC for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B0CNCXCWB5 | Ean: 0768481810289 | UPC: 768481810289
Support The Function Of Balancing Car By Connecting The Imu Module Through The.
75200 Pro V2.0 Aluminum Substrate Single Drive: Supports Single Serial Port Function,And Integrates Bluetooth Module Function (Convenient To Connect Bluetooth Parameters And Read Data In Real Time),And Built With Power On/Off Switch..
Firmware: 6.02, Supports Firmware Upgrade,Voltage: 14-84V (Safe For 4-20S),Continuous Current: 50V/200A; 75V/150A (Values Depend On The Mounting.
Aluminum Pcb With Good Heat Dissipation To Expand Life Span..
Support Various Control Modes: Current / Duty Cycle / Speed / Pid Control Modes..
Features
- Adjustable protection against: low voltage protection, high voltage protection,over current protection, temperature abnormal protection, mosfets / motor over temperature protection.
- Support various control modes: Current / Duty cycle / Speed / PID control modes.
- Support the function of balancing car by connecting the IMU module through the
- Aluminum PCB with good heat dissipation to expand life span.
- 75200 Pro V2.0 aluminum substrate single drive: supports single serial port function,and integrates Bluetooth module function (convenient to connect Bluetooth parameters and read data in real time),and built with power on/off switch.
- Firmware: 6.02, supports firmware upgrade,Voltage: 14-84V (safe for 4-20S),Continuous current: 50V/200A; 75V/150A (Values depend on the mounting
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: Flipsky
Weight: 0.66 Pounds
Warranty: 2m+
See On Amazon #7
FLIPSKY 75200 Pro 84V High Current with Aluminum PCB Based on VESC for Fighting Robot Surfboard AGV Robot
Asin: B0C69B93Q6 | Ean: 0768481808668 | UPC: 768481808668
Safer & Protection Functions: Low Voltage Protection, High Voltage Protection, Over-Current Protection, Temperature Abnormally Protection, Mosfets Over-Temperature Protection..
75200 Pro Size:130X67.7X39..4Mm.Communication Ports: Usb, Can, Uart, Spi, Iic.
Widely Applications:E-Skateboard,Ebike,Scooter,Robot Etc.
Upgrade Performance:Latest Version Firmware,Support Rich Control Interface And Sensors,Programmable.
Features
- Continuous current: 50V/200A; 75V/150A (Values depend on the mounting, ambient temperature and air/water circulation around the device!); Burst: 300A
- Upgrade Performance:Latest Version Firmware,support rich control interface and sensors,programmable
- Safer & Protection functions: low voltage protection, high voltage protection, over-current protection, temperature abnormally protection, mosfets over-temperature protection.
- Widely applications:e-skateboard,ebike,scooter,robot etc
- 75200 Pro Size:130x67.7x39..4mm.Communication Ports: USB, CAN, UART, SPI, IIC
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: Flipsky
Weight: 0.66 Pounds
Warranty: 6m
See On Amazon #8
FLIPSKY 75100 FOC 75V 100A Single ESC with Aluminum PCB for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B0B4G199S3 | Model: 75100 Aluminum PCB | PartNumber: 75100 Aluminum PCB | Ean: 0768481805247 | UPC: 768481805247
Supported Sensors:Abi,Hall,As5047,As5048a.
Firmware: Latest (Firmware Update Supported). Please Be Careful To Limit The Absolute Maximum Current Below 250A..
Top Service: If There Are Any Question Or Need Help , Just Feel Free Contact Us , We Will Always Here Help You Out Within 24 Hours..
More Powerful :Voltage:14-84V (4-20S) ,Max Current:120A,Erpm:150000 .Provide Your Electric Skateboard With More Powerful Power And A More Exciting Modification Experience..
Programmable:Based On Vesc, Programmable Via Vesc_Tool With Overheat And Overcurrent Protection..
Features
- Support BLDC square wave mode control and FOC sine wave mode
- Programmable Based on VESC, programmable via vesc_tool with overheat and overcurrent protection.
- Supported Sensors:ABI HALL AS5047 AS5048A
- More powerful :Voltage:14-84V (4-20S) Max Current:120A,ERPM:150000 .Provide your electric skateboard with more powerful power and a more exciting modification experience.
- Firmware: latest (firmware update supported). Please be careful to limit the Absolute Maximum Current below 250A.
- Top Service: If there are any question or need help , just feel free contact us , we will always here help you out within 24 hours.
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: Flipsky
See On Amazon #9
FLIPSKY 75200 FOC 84V High Current Single ESC with Aluminum PCB for Electric Skateboard/Scooter/Ebike Speed Controller
Asin: B0BBRQ85H8 | Ean: 0768481806770 | UPC: 768481806770
▶Voltage: 14-84V (Safe For 4-20S).Support Various Control Modes: Current / Duty Cycle / Speed / Pid Control Modes..
▶Warm Tips: It Is Recommended To Keep Firmware 5.2 From Factory Ship, The New Firmware Upgrade May Damage The Esc..
▶Communication Ports: Usb, Can, Uart, Spi, Iic Supported Sensors: Abi, Hall, As5047, As5048a Input Source Support: Ppm, Adc, Nrf, Uart.
▶Continuous Current: 50V/200A; 75V/150A (Values Depend On The Mounting, Ambient Temperature And Air/Water Circulation Around The Device!); Burst: 300A.
Features
- Use aluminum alloy case for better heat dissipation effect,which makes ESC more durable.
- Continuous current: 50V/200A; 75V/150A (Values depend on the mounting, ambient temperature and air/water circulation around the device!); Burst: 300A
- Voltage: 14-84V (safe for 4-20S).Support various control modes: Current / Duty cycle / Speed / PID control modes.
- Communication Ports: USB, CAN, UART, SPI, IIC Supported Sensors: ABI, HALL, AS5047, AS5048A Input Source Support: PPM, ADC, NRF, UART
- Warm tips: It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
- See more on Amazon...
Brand: FLIPSKY | Manufacturer: FLIPSKY
Warranty: 6m
See On Amazon
Looking For Something Else?
Search