Official Creality 3D Printer Filament, PLA Filament 1.75mm Cardboard Spool Smooth Printing Less-Tangle Dimensional Accuracy +/- 0.02mm 1kg/Roll(2.2lbs) Fit for Most FDM 3D Printers (Rainbow)
Asin: B0C6H1RHWV
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Clog-Free & Bubble-Free】High-Purity And Impurity-Free Raw Materials Enable The 3D Printer Filament To Be Extruded Evenly And Smoothly During Printing. Our Creality Pla Are Fully Dried For 24 Hours Before Packing, Then Vacuum Sealed In Pc Bags With Desiccant..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Tangle-Free And Easy To Use】Full Mechanical Winding Is Produced And Strict Manual Examination Is Done To Make Sure The 3D Filament 1.75Mm Line Is Tidy And No-Tangle, Leaving No Room For Original Tangling And Greatly Improving Printing Efficiency. Don't Forget To Insert Creality Filament Into The Storage Hole After Use, It Help You Store Your Filament And Avoid Tangles..
【Dimensional Accuracy & Consistency】Advanced Ccd Diameter Measuring And Self-Adaptive Control System In The Manufacturing Guarantee These Pla Filaments Of 1.75 Mm Diameter, Dimensional Accuracy +/- 0.02 Mm. 1 Kg Spool (2.2Lbs) Compatible With Most Of Fdm 3D Printers..
Features
- High-Quality PLA Filament Creality PLA Filament is made of a biological material, mainly made of corn grain, eco-friendly, and harmless to humans. It is odorless, low warpage and shrinkage, excellent printability, good ductility and easy to use.
- Dimensional Accuracy & Consistency Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, dimensional accuracy +/- 0.02 mm. 1 kg spool (2.2lbs) compatible with most of FDM 3D printers.
- Clog-Free & Bubble-Free High-purity and impurity-free raw materials enable the 3D printer filament to be extruded evenly and smoothly during printing. Our Creality PLA are fully dried for 24 hours before packing, then vacuum sealed in PC bags with desiccant.
- Tangle-free and Easy to Use Full mechanical winding is produced and strict manual examination is done to make sure the 3D filament 1.75mm line is tidy and no-tangle, leaving no room for original tangling and greatly improving printing efficiency. Don't forget to insert Creality filament into the storage hole after use, it help you store your filament and avoid tangles.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 2.20 pounds
Warranty: 3 months
See On Amazon Similar To Official Creality 3D Printer Filament
#1
ELEGOO PLA Filament 1.75mm Black 1KG, 3D Printer Filament Dimensional Accuracy +/- 0.02mm, 1kg Cardboard Spool(2.2lbs) 3D Printing Filament Fits for Most FDM 3D Printers
Asin: B0BM739JRF
【Less-Tangle And Easy To Use】Full Mechanical Winding And Strict Manual Examination To Ensure That The Line Is Neatly Arranged And Less Tangled, And To Avoid Possible Snap And Line Breaking. A Larger Spool Inner Diameter Design For Easy Feeding.
【Wide Compatibility】Universal Compatibility With Most Of The Common 1.75Mm Fdm 3D Printers. Elegoo 3D Printer Filament Offers A Range Of Colors To Boost Your Creativity And Is Essential For Your Printing Projects.
【Clog-Free & Bubble-Free】Designed And Manufactured With Superb Layer Bonding And Great Fluidity For Smooth And Stable Extrusion. Complete Dried For Before Packaging And Vacuum Sealed Well To Protect The Filament From Moisture, No Clogging And Bubbling Problems.
【Dimensional Accuracy & Consistency】 Strict Tolerances Guarantee These Pla Filaments Of 1.75 Mm Diameter Much Smoother And More Stable Printing With The Dimensional Accuracy Of +/- 0.02 Mm, 1 Kg Spool (2.2Lbs).
Features
- High-Quality PLA Filaments Made of high-quality PLA, a commonly used thermoplastic material features lower melting temperature and ease of use, low warp and shrinkage, odorless during printing, and provides a glossy surface finish
- Dimensional Accuracy & Consistency Strict tolerances guarantee these PLA filaments of 1.75 mm diameter much smoother and more stable printing with the dimensional accuracy of +/- 0.02 mm, 1 kg spool (2.2lbs)
- Less-tangle and Easy to Use Full mechanical winding and strict manual examination to ensure that the line is neatly arranged and less tangled, and to avoid possible snap and line breaking. A larger spool inner diameter design for easy feeding
- Clog-Free & Bubble-Free Designed and manufactured with superb layer bonding and great fluidity for smooth and stable extrusion. Complete dried for before packaging and vacuum sealed well to protect the filament from moisture, no clogging and bubbling problems
- Wide Compatibility Universal compatibility with most of the common 1.75mm FDM 3D printers. ELEGOO 3d printer filament offers a range of colors to boost your creativity and is essential for your printing projects
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Weight: 2.00 Pounds
Warranty: 30 day guarantee for any quality reasons
See On Amazon #2
Creality 3D Printer Filament, PLA Filament 1.75mm Bundle 2kg for 3D Printing, Ender PLA Filament No-Tangling, Strong Bonding & Overhang Performance, Accuracy +/- 0.02mm
Asin: B0C4TNQZYY | Model: 3301010337 | PartNumber: 3301010337
🤗 𝐋𝐄𝐒𝐒-𝐓𝐀𝐍𝐆𝐋𝐄 & 𝐒𝐓𝐑𝐎𝐍𝐆𝐄𝐑 𝐓𝐎𝐔𝐆𝐇𝐍𝐄𝐒𝐒 - Full Mechanical Winding And Strict Manual Examination, To Make Sure The Line Tidy And Less-Tangle, So As To Avoid Possible Snap And Line Breaking; Larger Spool Inner Diameter Design Makes Feeding Smoother. The Imported Raw Material Upgrades With Stronger Toughness. It Is Not Easy To Break, Meeting Your Demands For Printing Projects Of Functional Parts With Higher Toughnes..
🤗 𝐇𝐈𝐆𝐇 𝐂𝐎𝐌𝐏𝐀𝐓𝐈𝐁𝐈𝐋𝐈𝐓𝐘 &𝟏𝟎𝟎% 𝐄𝐍𝐕𝐈𝐑𝐎𝐍𝐌𝐄𝐍𝐓𝐀𝐋-𝐅𝐑𝐈𝐄𝐍𝐃𝐋𝐘 - Compatible With 99% Fdm & Fff 3D Printers (With Heated Beds) 3D Pen. Environmental Protection, Made From Starch Raw Materials Derived From Renewable Plant Resources..
🤗 𝐃𝐈𝐌𝐄𝐍𝐒𝐈𝐎𝐍𝐀𝐋 𝐀𝐂𝐂𝐔𝐑𝐀𝐂𝐘 & 𝐂𝐎𝐍𝐒𝐈𝐒𝐓𝐄𝐍𝐂𝐘 - Advanced Ccd Diameter Measuring And Self-Adaptive Control System In The Manufacturing Guarantee These Pla Filaments Of 1.75 Mm Diameter, Dimensional Accuracy + / - .02 Mm; 1Kg/Spool, Total 2Kgs (4.4Lbs)..
🤗 𝐂𝐋𝐎𝐆-𝐅𝐑𝐄𝐄 & 𝐁𝐔𝐁𝐁𝐋𝐄-𝐅𝐑𝐄𝐄 - This 3D Printer Filament Bundle Adopts A Special Patented Design And Manufacturing Process To Ensure A Smooth And Stable Printing Experience For These Pla Filaments. It Is Completely Dried For 24 Hours Before Packaging And Vacuum-Sealed In A Pc Bag With A Desiccant. (Note: Appropriate Temperature Range And Machine Operation Required.).
Features
- - - This 3D printer filament bundle 1.75mm is the most cost-effective filament we release in 2023, the color is classic black and white, you can have 2 spools now just with one spool's money! And you can just print whatever you want. Saving money but not inspirations!
- - & - - This 3D printer filament bundle adopts a special patented design and manufacturing process to ensure a smooth and stable printing experience for these PLA filaments. It is completely dried for 24 hours before packaging and vacuum-sealed in a PC bag with a desiccant. (Note: Appropriate temperature range and machine operation required.)
- - & - Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother. The Imported raw material upgrades with stronger toughness. It is not easy to break, meeting your demands for printing projects of functional parts with higher toughnes.
- & - Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, dimensional accuracy + / - .02 mm; 1kg/spool, total 2kgs (4.4lbs).
- & % - - Compatible with 99% FDM & FFF 3D printers (with heated beds) 3D Pen. Environmental protection, made from starch raw materials derived from renewable plant resources.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 5.51 x 8.26 x 8.26 inches | Weight: 5.68 Pounds
Warranty: 1 year warranty
See On Amazon #3
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Grey
Asin: B0834W5L3L | Model: 3D-PLA-BKGY | PartNumber: 3D-PLA-BKGY
【𝐂𝐥𝐨𝐠-𝐅𝐫𝐞𝐞 & 𝐁𝐮𝐛𝐛𝐥𝐞-𝐅𝐫𝐞𝐞】 Designed And Manufactured With A Clog-Free Patent To Guarantee A Smooth And Stable Printing Experience With Our Pla Refills. Completely Dried For 24 Hours Before Packaging And Vacuum Sealed With Desiccants In Nylon Re-Bag Enable Much Smoother And More Stable Printing. The Larger Spool Inner Diameter Design Makes Feeding Smoother.
【𝐅𝐢𝐥𝐚𝐦𝐞𝐧𝐭 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧】 1. Install The Spool On The Spool Holder Of A 3D Printer, And Preheat The Nozzle Of The 3D Printer. 2. Cut The Filament Tip Diagonally, And Guide It Through The Extruder And Feeding Tube. 3. Manually Push The Filament Through The Feeding Tube To The Nozzle, Until The Filament Melts Through The Nozzle. Note: When Installing And Changing Filament, We Highly Suggest Preheating The Nozzle First To Reduce The Nozzle Block Risk.
【𝐄𝐜𝐨-𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲 & 𝐖𝐢𝐝𝐞 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲】 Made From Starch Raw Materials Derived From Renewable Plant Resources, Pla Filament Boasts Lower Melting Temperatures And Even Does Not Need A Heated Bed. No Odor, No Pollution, And Non-Toxic During Printing. Anycubic Pla Filament Compatible Perfectly With Most Fdm 3D Printers And 3D Pens That Use 1.75Mm Filament On The Market.
【𝐍𝐞𝐚𝐭 𝐒𝐩𝐨𝐨𝐥 & 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】 The 3D Printing Pla Filament Was Neat On The Roll And Easily Left The Spool Without Crossing Turns. Resulting In Less Thread Pulling And Twisting, No Clogging, And Super Under-Extruding. It Produces The Cleanest, Least Stringing Prints Of Any Of The Filaments You Have Used While Resisting Warping And Providing The Glossiest Finish. Without A Single Jam And Adhesion Issue Which Meets Your Demands For Printing Freely.
Features
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- & The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
- - & - Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
- - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market
- 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Weight: 2.20 pounds
See On Amazon #4
OVERTURE PETG Filament 1.75mm, 3D Printer Filament, 1kg Filament (2.2lbs), Dimensional Accuracy Probability +/- 0.02 mm, Fit Most FDM Printers (Black (1-Pack))
Asin: B07PGYHYV8 | Model: OVPETG175 | PartNumber: OVPETG175 | Ean: 0850006233403 | UPC: 850006233403
【Dimensional Accuracy & Consistency】Advanced Ccd Diameter Measuring And Self-Adaptive Control System In The Manufacturing Insure These Tough Pla Filaments To Be Strict Tolerances. Diameter 1.75Mm, Dimensional Accuracy (98%) + / - 0.02 Mm Without Any Exaggeration.
【Risk-Free & Lifetime Service】 Discover Worry-Free 3D Printing With Overture Filament—Backed By Our Lifetime Satisfaction Service. No Matter The Challenges, We're Here To Support You For A Seamless 3D Printing Experience. Trust Overture As Your Dependable Supplier Of 3D Printing Filaments And Accessories.
【Wide Compatibility And Color Selection】 Overture Filaments Seamlessly Integrates With Consumer And Industrial 3D Printers. Explore Your Creative Side With Our Extensive Selection Of Vibrant Colors, Ensuring A Spectrum Of Possibilities For Your Unique Creations.
【Clog-Free & Bubble-Free】 Designed And Manufactured With Our Patented Clog-Free Formula To Get A Smooth And Seamless Printing Experience. All Spools Undergo Thorough Drying For 24 Hours Before Packaging And Are Vacuum-Sealed In Resealable Foil Packaging. To Maintain Optimal Performance, Store Petg Filament In Sealed Storage With Desiccants (Silica Gel) Or Dry For >6 Hours At 65˚C.
Features
- High Performance & Compatibility Combines the advantages of both PLA and ABS with Overture PETG, featuring the ease of printing with PLA and improved mechanical properties of ABS, including enhanced impact resistance and superior layer adhesion
- Clog-Free & Bubble-Free Designed and manufactured with our patented clog-free formula to get a smooth and seamless printing experience. All spools undergo thorough drying for 24 hours before packaging and are vacuum-sealed in resealable foil packaging. To maintain optimal performance, store PETG filament in sealed storage with desiccants (silica gel) or dry for >6 hours at 65 C
- Dimensional Accuracy & Consistency Advanced CCD diameter measuring and self-adaptive control system in the manufacturing insure these tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy (98%) + / - 0.02 mm without any exaggeration
- Wide Compatibility and Color Selection Overture filaments seamlessly integrates with consumer and industrial 3D printers. Explore your creative side with our extensive selection of vibrant colors, ensuring a spectrum of possibilities for your unique creations
- Risk-Free & Lifetime Service Discover worry-free 3D printing with Overture filament backed by our lifetime satisfaction service. No matter the challenges, we're here to support you for a seamless 3D printing experience. Trust Overture as your dependable supplier of 3D printing filaments and accessories
- See more on Amazon...
Brand: OVERTURE | Manufacturer: OVERTURE
Weight: 2.20 Pounds
See On Amazon #5
eSUN PLA+ Filament 1.75mm, 3D Printer Filament PLA Plus, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Black
Asin: B07FQDKR28 | Model: PLA+175B1KG | PartNumber: PLA+175B1KG | Ean: 0781520911990 | UPC: 781520911990
【Tangle Free & No Plugging】Total Length: 340-350M. Full 1Kg 3D Printer Filament Reel, Perfect Roundness And Very Tight Diameter Tolerance, Good Winding, Does Not Overlap Or Tangle. Melt Well, Feed Smoothly And Constantly Without Clogging The Nozzle Or Extruder..
【High Compatibility】Compatible With Most Of Fdm 3D Printers, Such As:Bambu Lab P1p / X1 / X1c, Ankermake M5, Creality K1 / K1 Max, Voron 2.4, Flsun V400, Prusa, Ultimaker, Mk3, Ender 3, Makerbot, Flashforge, Raise3d. Good Layer Bonding Performance Meets Your Demands For Printing Functional Parts With Higher Toughness. Widly Used In Machinery, Electronic Appliances, Automobiles, Decorations, Cosplay And Other Items..
【Dimensional Tolerance +/- 0.03Mm】Esun Pla+ 3D Printer Filaments Are Produced With More Precise Specification. Minimum Tolerance And Low Warping To Ensure Consistent Feeding And Stable Prints, No Bubbles, Less Stringing, Extremely High Successful Rate..
【High Speed Printing】Meet The Demands For High-Speed Printers. Continues Consistently Outstanding Performance At High Speeds. Compatible With Bambu Lab X1 / X1c / P1p ,Creality K1 / K1 Max And Ankermake M5..
Features
- Easy to Print PLA+ is an enhanced version of ordinary PLA. It has higher strength and better toughness, not easy to break. low shrinkage, no deformation, no cracking, high printing precision. Made with starch raw materials derived from plant resources, ideal for indoor printing.
- High Speed Printing Meet the demands for high-speed printers. Continues consistently outstanding performance at high speeds. Compatible with Bambu Lab X1 / X1C / P1P ,Creality K1 / K1 Max and AnkerMake M5.
- Tangle Free & No Plugging Total Length: 340-350m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.
- Dimensional Tolerance +/- 0.03mm eSUN PLA+ 3D printer filaments are produced with more precise specification. Minimum tolerance and low warping to ensure consistent feeding and stable prints, no bubbles, less stringing, extremely high successful rate.
- High Compatibility Compatible with Most of FDM 3D Printers, such as:Bambu Lab P1P / X1 / X1C, AnkerMake M5, Creality K1 / K1 Max, Voron 2.4, FLSUN V400, Prusa, UltiMaker, MK3, Ender 3, MakerBot, Flashforge, Raise3D. Good layer bonding performance meets your demands for printing functional parts with higher toughness. Widly used in machinery, electronic appliances, automobiles, decorations, COSPLAY and other items.
- See more on Amazon...
Brand: eSUN | Manufacturer: eSUN
Weight: 2.20 Pounds
See On Amazon #6
Official Creality PETG 3D Printer Filament 1.75mm 1KG (2.2lbs), High Precision Strong Toughness, Odorless Better Flow Moistureproof 3D Printing Ender Filament(Black)
Asin: B0C8NP63GD | Model: P-PETG-Black | PartNumber: P-PETG-Black | Ean: 0795847035420 | UPC: 795847035420
⭐️【Creality Toughness-Enhanced Petg】 Creality Petg Choose Durable And Strong Material That Delivers Excellent Clarity, Light Transmission, And A Glossy Finish. It Is Recommended To Use A Printing Temperature Of 220-250°C And A Base Plate Temperature Of 70-80°C For Better Printing Results..
⭐️【No Clogging & No Bubbles】Creality Filaments Are Thoroughly Dried And Carefully Vacuum Sealed To Protect Them From Moisture And Dust, Which Ensures That There Will Be No Issues With Clogging Or Bubbling During Printing. Creality Petg Is Designed To Be Perfectly Compatible With The Majority Of 1.75Mm Fdm 3D Printers, Especially Suitable For Creality 3D Printers!.
⭐️【High Precision & Consistent Performance】Creality Petg Filament Boasts A Diameter Of 1.75Mm, Ensuring Utmost Accuracy With A Tolerance Of Only +/- 0.02Mm. With Strict Quality Control And Impeccable Dimensional Precision, Ender Petg Filament Guarantees A Smooth And Steady Feeding During Printing..
⭐️【Tangle-Free & Neatly Wound】Creality Ensure That Every Petg Filament Is Tightly And Neatly Wrapped By Utilizing Full Mechanical Winding, Which Effectively Minimizes Tangles, Filament Snapping, And Line Breakage..
Features
- Creality Quality Assurance Creality PETG combines the benefits of PLA and ABS to reach Eco-friendly and odorless performance. This PETG Filament is feature in good toughness to avoid cracking and warping, enbale excellent 3D printing.
- Tangle-Free & Neatly Wound Creality ensure that every PETG filament is tightly and neatly wrapped by utilizing full mechanical winding, which effectively minimizes tangles, filament snapping, and line breakage.
- Creality Toughness-enhanced PETG Creality PETG choose durable and strong material that delivers excellent clarity, light transmission, and a glossy finish. It is recommended to use a printing temperature of 220-250 C and a base plate temperature of 70-80 C for better printing results.
- High Precision & Consistent Performance Creality PETG filament boasts a diameter of 1.75mm, ensuring utmost accuracy with a tolerance of only +/- 0.02mm. With strict quality control and impeccable dimensional precision, Ender PETG filament guarantees a smooth and steady feeding during printing.
- No Clogging & No Bubbles Creality filaments are thoroughly dried and carefully vacuum sealed to protect them from moisture and dust, which ensures that there will be no issues with clogging or bubbling during printing. Creality PETG is designed to be perfectly compatible with the majority of 1.75mm FDM 3D printers, especially suitable for Creality 3D Printers!
- See more on Amazon...
First Available: 12/07/2023
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 4.33 x 4.33 x 4.33 Inches | Weight: 2.20 pounds
Warranty: 180
See On Amazon #7
Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function DIY 3D Printers Printing Size 8.66x8.66x9.84 inch
Asin: B07BR3F9N6 | Model: Ender 3 | PartNumber: Ender 3 | Ean: 0796862079093, 0649910035087, 0680577986473, 0193621889328 | UPC: 649910035087, 680577986473, 796862079093, 193621889328
Advanced Extruder Technology: Upgraded Extruder Greatly Reduces Plugging Risk And Bad Extrustion; V-Shape With Pom Wheels Make It Move Noiseless, Smoothly And Durable..
Strict Test: Strict Testing For Key Components Before Delivery And Life-Time Technical Supports Available..
Safety Protected Power Supply: Only Needs 5 Minutes For Hot Bed To Reach 100 Degree..
Easy And Qucik Assembly: It Comes With Several Assembled Parts, You Only Need About 2 Hours To Assemble 20 Nuts Well..
Features
- Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
- Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
- Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 100 degree.
- Strict Test: Strict testing for key components before delivery and life-time technical supports available.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 18.31 x 16.14 x 16.54 inches | Weight: 15.43 pounds
Warranty: 1 year
See On Amazon #8
CREALITY PETG Filament 1.75mm 3D Printer Filament, 1kg (2.2lb) Neatly Wound Spool, Dimensional Accuracy 0.03mm, 2024 Latest Batch, Fit for Ender, Bambu Lab, Anycubic,ELEGOO FDM Printers, Black
Asin: B0CRLGHWZF | Model: Creality Black PETG | PartNumber: Creality Black PETG | Ean: 0198168963234 | UPC: 198168963234
【Toughness-Enhanced Petg】 Creality Petg Choose Durable And Strong Material That Delivers Excellent Clarity, Light Transmission, And A Glossy Finish. It Is Recommended To Use A Printing Temperature Of 220-250°C And A Base Plate Temperature Of 70-80°C For Better Printing Results..
【High Precision】Creality Petg Filament Boasts A Diameter Of 1.75Mm, Ensuring Utmost Accuracy With A Tolerance Of Only +/- 0.03Mm. With Strict Quality Control And Impeccable Dimensional Precision, Ender Petg Filament Guarantees A Smooth And Steady Feeding During Printing..
【No Clogging & No Bubbles】Creality Filaments Are Thoroughly Dried And Carefully Vacuum Sealed To Protect Them From Moisture And Dust, Which Ensures That There Will Be No Issues With Clogging Or Bubbling During Printing..
【Tangle-Free, Neatly Spooled】Creality Guarantees That 99% Petg Filament Is Tightly And Neatly Spooled Using Fully Mechanical Winding, Which Effectively Reduces The Occurrence Of Tangles, Filament Breakage And Line Snapping..
Features
- High Performance Creality PETG filament combines the advantages of PLA and ABS. Eco-friendly, odorless and non-toxic.This PETG Filament is feature in good toughness to avoid cracking and warping, enbale excellent 3D printing.
- Tangle-Free, Neatly Spooled Creality guarantees that 99% PETG filament is tightly and neatly spooled using fully mechanical winding, which effectively reduces the occurrence of tangles, filament breakage and line snapping.
- Toughness-Enhanced PETG Creality PETG choose durable and strong material that delivers excellent clarity, light transmission, and a glossy finish. It is recommended to use a printing temperature of 220-250 C and a base plate temperature of 70-80 C for better printing results.
- No Clogging & No Bubbles Creality filaments are thoroughly dried and carefully vacuum sealed to protect them from moisture and dust, which ensures that there will be no issues with clogging or bubbling during printing.
- High Precision Creality PETG filament boasts a diameter of 1.75mm, ensuring utmost accuracy with a tolerance of only +/- 0.03mm. With strict quality control and impeccable dimensional precision, Ender PETG filament guarantees a smooth and steady feeding during printing.
- See more on Amazon...
First Available: 02/27/2024
Brand: Creality | Manufacturer: Creality
Dimensions: 7.68 x 7.68 x 2.36 inches | Weight: 2.22 Pounds
Warranty: One Month Free Return/Change
See On Amazon #9
ELEGOO PLA Plus Filament 1.75mm Black 2KG, PLA+ Tougher and Stronger 3D Printer Filament Pro Dimensional Accuracy +/- 0.02mm, 2 Pcs 1kg Spool(2.2lbs) Fits for Most FDM 3D Printers
Asin: B0C14PVBPB
【Top-Notch Accuracy & Consistent】Precise Production Process Guarantee Elegoo Pla Plus Filament Of 1.75Mm Diameter, Accuracy Of +/- 0.02Mm. Strict Tolerances And Perfect Dimensional Accuracy Ensure Smooth And Consistent Feeding For Filaments.
【No Clogging & No Bubbles】Complete Dried Before Packing And Well Vacuum Sealed Protect The Filaments From Moisture And Dust,No Clogging And Bubbling. Perfectly Compatible With Most 1.75Mm Fdm 3D Printers On The Market.
【Glossy Surface & Easy To Use】Accurate Deposition And Strong Layer Bonding Bring A Smoother Surface Finish Without Layer Delamination Issues. The Lower Printing Temperature Make It Very Easy To Print With Excellent Print Quality.
【Less-Tangle & Neatly Wound】Full Mechanical Winding And Strict Manual Inspection Ensures That All Pla+ Filaments Are Neatly Wound, Which Effectively Reduces Tangles, Snap And Line Breakage Issues.
Features
- Higher Toughness & Impact Strength Toughness and impact strength of ELEGOO PLA Plus is apparently enhanced. It s also low warpage and shrinkage, bringing excellent results for printing functional parts or other projects
- Less-tangle & Neatly Wound Full mechanical winding and strict manual inspection ensures that all pla+ filaments are neatly wound, which effectively reduces tangles, snap and line breakage issues
- Top-Notch Accuracy & Consistent Precise production process guarantee ELEGOO PLA Plus filament of 1.75mm diameter, accuracy of +/- 0.02mm. Strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding for filaments
- Glossy Surface & Easy to Use Accurate deposition and strong layer bonding bring a smoother surface finish without layer delamination issues. The lower printing temperature make it very easy to print with excellent print quality
- No Clogging & No Bubbles Complete dried before packing and well vacuum sealed protect the filaments from moisture and dust,no clogging and bubbling. Perfectly compatible with most 1.75mm FDM 3D printers on the market
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Weight: 2.20 pounds
Warranty: 30 day guarantee for any quality reasons
See On Amazon #10
Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm
Asin: B07RD6D2ZQ | Model: Dawnblade190503 | PartNumber: Dawnblade190503 | Ean: 0745679683719 | UPC: 745679683719
Excellent Flatness - Improved 3D Printer Glass Plate Provides More Flat And More Smooth Build Surface Than Magnetic Mat Or Pei Sticker, Ensuring High Flatness For The Bottom Of Model..
Compatibility - The 3D Printer Parts Is Applicable With Creality 3D Printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro And Cr-20, Cr-20 Pro, Pls Confirm If This Borosilicate Glass Bed Compatible With Your Printer..
Super Convenient - Very Easy To Take Off The Model, No Tools Needed. This Borosilicate Glass Bed Could Be Fixed With Middle Sized Clips And Cleaned With Alcohol Or Acetone At Room Temperature..
No-Indentation Printing - Upgraded Ender 3 Glass Plate Has A Much Smaller Creality Logo Than Older Version, Avoiding Leaving Logo Indentations On Molds Surface During 3D Printing..
Features
- No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts.
- No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing.
- Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
- Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.
- Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer.
- See more on Amazon...
Brand: Dawnblade | Manufacturer: Dawnblade
Dimensions: 0.16 x 9.25 x 9.25 inches
See On Amazon #11
GIANTARM Silk Metallic Silver PLA 3D Printer Filament 1kg Spool, 1.75mm Dimensional Accuracy +/-0.03mm, 1080 Feet per Roll, Vacuum Packaging
Asin: B08VS41SDQ | Model: 700-001-1202 | PartNumber: 700-001-1202 | Ean: 0713101714621 | UPC: 713101714621
【Dimensional Accuracy & Consistency】- Advanced Ccd Diameter Measuring And Self-Adaptive Control System In The Manufacturing To Make These Pla Filaments Of 1.75 Mm Diameter, Dimensional Accuracy + / - 0.03 Mm; 1 Kg Spool (2.2Lbs),Suitable For Most Fdm 3D Prnter..
【Less-Tangle And Easy-To-Use】–Full Mechanical Winding And Strict Manual Examination, To Make Sure The Pla Filament Line Tidy And Less-Tangle, So As To Avoid Possible Snap And Line Breaking; Larger Spool Inner Diameter Design Makes Feeding Smoother..
【Clog-Free & Bubble-Free】- Completely Dried For 24 Hours Before Packaging And Vacuum Sealed With Desiccants In Nylon Re-Bag, Enable Much Smoother And More Stable Printing. Since The Pla Filament Is Prone To Moisture, Please Store It Into A Re-Sealable Aluminum Foil Bag After Unsealing To Maintain Excellent Printing Performance..
【Toughness Enhanced Pla Filaments】---Giantarm Silk Pla Filaments Have The Advantages Of Incredible Toughness, Unique Printing Quality, High Purity With Low Shrinkage And Superb Layer Bonding, Meeting Your Personalized Printing Demands For Functional Parts..
Features
- Shiny Silk PLA Smooth and shiny finish like real silk, no extra polishing needed, printing at a high detail results in a beautiful finish. GIANTARM high quality silk PLA filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result!
- Toughness Enhanced PLA Filaments ---GIANTARM Silk PLA filaments have the advantages of incredible toughness, unique printing quality, high purity with low shrinkage and superb layer bonding, meeting your personalized printing demands for functional parts.
- Dimensional Accuracy & Consistency - Advanced CCD diameter measuring and self-adaptive control system in the manufacturing to make these PLA filaments of 1.75 mm diameter, dimensional accuracy + / - 0.03 mm; 1 kg spool (2.2lbs),suitable for most FDM 3D prnter.
- Clog-free & Bubble-Free - Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Since the PLA filament is prone to moisture, please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance.
- Less-tangle and Easy-to-Use Full mechanical winding and strict manual examination, to make sure the PLA filament line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother.
- See more on Amazon...
Brand: GIANTARM | Manufacturer: GIANTARM
Weight: 2.20 pounds
Warranty: 1 year
See On Amazon #12
ELEGOO Rapid PLA Plus Filament 1.75mm Black & White 2KG, PLA+ 3D Printer Filament for 30-600 mm/s High Speed Printing, Dimensional Accuracy +/- 0.02 mm, 2 Pack 1kg Spool(2.2lbs)
Asin: B0C6XDTHYN
【Less-Tangle & Neatly Wound】Full Mechanical Winding And Strict Manual Inspection Ensures That All High-Speed Pla Plus Filaments Are Neatly Wound, Which Effectively Reduces Tangles, Snap And Line Breakage Issues.
【For Most 3D Printers】Rapid Pla+ Filament Fit For Both Regular Printers And High Speed Printers, Perfectly For Most High Speed Printer Such As Neptune 4, Neptune 4 Pro, K1, K1 Max, Ender 5 Series, Kobra 2, M5, M5c And More.
【Top-Notch Accuracy & Consistent】Precise Production Process Guarantee The Filament Of 1.75Mm Diameter, Accuracy Of +/- 0.02Mm. Strict Tolerances And Perfect Dimensional Accuracy Ensure Smooth And Consistent Feeding For Filaments.
【Enhanced Strength & Toughness】Elegoo Rapid Pla Plus Filament Features High Flexural Modulus And Elongation At Break, Which Makes It Resistant To Brittleness And Cracking, Bringing Excellent Results For Printing Functional Parts.
Features
- 30-600mm/s Printing Speed With enhanced fluidity, ELEGOO RAPID PLA+ filament melts rapidly and flows smoothly, allowing for up to 600mm/s fast printing speed. You can complete the projects quickly without compromising on quality
- Enhanced Strength & Toughness ELEGOO RAPID PLA plus filament features high flexural modulus and elongation at break, which makes it resistant to brittleness and cracking, bringing excellent results for printing functional parts
- Less-tangle & Neatly Wound Full mechanical winding and strict manual inspection ensures that all high-speed pla plus filaments are neatly wound, which effectively reduces tangles, snap and line breakage issues
- Top-Notch Accuracy & Consistent Precise production process guarantee the filament of 1.75mm diameter, accuracy of +/- 0.02mm. Strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding for filaments
- For Most 3D Printers Rapid PLA+ filament fit for both regular printers and high speed printers, perfectly for most high speed printer such as Neptune 4, Neptune 4 pro, K1, K1 Max, Ender 5 series, Kobra 2, M5, M5C and more
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #13
ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 8.85x8.85x11in Large Printing Size
Asin: B0BJCQ59JS | Model: US-EL-3D-N3P | PartNumber: US-EL-3D-N3P
【Nozzle Kit For Better Printing Effect】The Nozzle Kit Contains A Tc4 Titanium Alloy Throat Pipe, An Aluminum Alloy Flat Heat Sink Structure, And A Brass Nozzle.The Widened Aluminum Heat Sink Paired With The Front Close-Fitting Efficient Cooling Fan For A Better Heat Dissipation Effect And Lower The Temperature Of The Throat Pipe, Thereby Reducing The Possibility Of Nozzle Clogging..
【More Stable Printing】The Z-Axis With Dual Synchronized Lead Screws And Dual-Motor Drive For More Stable Movement Of The Print Head And Higher Printing Accuracy, Avoiding The Printing Deviation Driven By A Single Z-Axis Lead Screw Motor. The 4-Wheel V-Guide Rail Pulley Is Made Of Pom With More Stable Movement, Low Noise, Wear Resistance, And Longer Service Life..
【Smarter Printing Experience】Auto Mesh Bed Leveling Adopts A Non-Contact High Precision Sensor To Automatically Scan 36 (6X6) Points Of The Hotbed And Collect Data In Real-Time, And Then Adjust The Z-Axis Height To Compensate For Any Irregularities And Unevenness Of The Printing Platform. (Only Applicable To Metal Printing Platforms) Smart Resume Printing: The Printer Will Auto-Pause When The Filament Runs Out Or Breaks, And You Can Resume Printing After A Power Outage..
【Dual-Gear Direct Extruder】The New Dual-Gear Direct Drive Extruder Is Made Of Sus303 High-Quality Stainless Steel With A 3:1 Reduction Ratio And Stronger Extrusion Force For Smoother Filament Feeding And More Stable & Accurate Printing, Which Greatly Reduces Nozzle Clogging And Under-Extrusion Issues, Printing Effect Is Better Than Bowden Extruder. Compatible With Multiple Filaments Such As Pla, Tpu, Petg, And Abs..
Features
- Overview of Neptune 3 Pro 225x225x280mm/8.85x8.85x11 inch market mainstream printing size can meet the needs of most users. With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation.
- Dual-Gear Direct Extruder The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS.
- Nozzle Kit for Better Printing Effect The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging.
- Smarter Printing Experience Auto mesh bed leveling adopts a non-contact high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axis height to compensate for any irregularities and unevenness of the printing platform. (Only applicable to metal printing platforms) Smart resume printing: the printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage.
- More Stable Printing The Z-axis with dual synchronized lead screws and dual-motor drive for more stable movement of the print head and higher printing accuracy, avoiding the printing deviation driven by a single Z-axis lead screw motor. The 4-wheel V-guide rail pulley is made of POM with more stable movement, low noise, wear resistance, and longer service life.
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 19.00 x 23.00 x 9.00 inches | Weight: 22.00 pounds
Warranty: 8 years manufacturer
See On Amazon #14
Mefine Creality Ender 3 Glass Bed Upgraded 3D Printer Tempered Glass Plate Build Surface for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1, 235x235x4mm
Asin: B08CXLLCH4 | Model: Ender3GLB | PartNumber: Ender3GLB | Ean: 0778992842808 | UPC: 778992842808
Easy To Remove: It Is Very Easy To Remove The Prints. The Surface Of Our Tempered Glass Bed Is A Layer Of The Microporous Composite Coating. It Will Contract As The Hot Bed Cooling Which Greatly Ensures The Prints Can Be Removed Manually Without Any Tools..
High-Grade Material: Made Of 100% Genuine Borosilicate Glass, Thick And High Quality. The Glass Bed's Hardness Is Up To 8 Mohs And Is Capable To Work Up To 400 ℃. Wipe Clean With Water To Start The Next Print. Scrubbing The Glass Platform With Alcohol Is Not Recommended, It Can Damage The Surface Coating Which Increases Adhesion. We Offer A 90-Day Free Replacement, Any Problems, Feel Free To Get In Touch With Us..
Excellent Flatness: Upgraded Ender 3 Build Plate With Smaller Creality Logo Provides A Flatter And Smoother Build Surface Than A Magnetic Mat Or Pei Sticker, Ensuring High Flatness For The Bottom Of Mold During 3D Printing..
No Edge Curling: The Composite Coating Of Our Tempered Glass Bed Has Super Strong Adhesion After Heating, Prints Can Be Stuck On The Build Surface Firmly Without Glue, Avoiding The Issue Of The Print's Edges Curling. Equipped With 4 Clips To Fix The Hotbed..
Features
- Compatibility: Officially authorized Creality glass bed, applicable for Creality 3D printers Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Neo, Ender 3 V2 Neo, Ender-5, CR-20, CR-20 Pro, other 3D printers with a print area of 220*220mm(note for Ender 5 S1) and most of the Cartesian style 3D printers with an MK2 MK3 hotbed. Please make sure the printing size of your printer's platform is compatible. and to be compatible with Ender-3 S1/Ender-3 S1 Pro, please remove the two positioning screws on the hotbed first.
- No Edge Curling: The composite coating of our tempered glass bed has super strong adhesion after heating, prints can be stuck on the build surface firmly without glue, avoiding the issue of the print's edges curling. Equipped with 4 clips to fix the hotbed.
- Easy to Remove: It is very easy to remove the prints. The surface of our tempered glass bed is a layer of the microporous composite coating. It will contract as the hot bed cooling which greatly ensures the prints can be removed manually without any tools.
- Excellent Flatness: Upgraded ender 3 build plate with smaller CREALITY logo provides a flatter and smoother build surface than a magnetic mat or PEI sticker, ensuring high flatness for the bottom of mold during 3D printing.
- High-Grade Material: Made of 100% Genuine Borosilicate Glass, thick and high quality. The glass bed's hardness is up to 8 Mohs and is capable to work up to 400 . Wipe clean with water to start the next print. Scrubbing the glass platform with alcohol is not recommended, it can damage the surface coating which increases adhesion. We offer a 90-day free replacement, any problems, feel free to get in touch with us.
- See more on Amazon...
Brand: Mefine | Manufacturer: Mefine
See On Amazon #15
FLASHFORGE Adventurer 5M 3D Printer with Fully Auto Leveling, Max 600mm/s High Speed Printing, 280 C Direct Extruder with 3S Detachable Nozzle, Core XY All Metal Structure, Print Size 220x220x220mm
Asin: B0CH4NYL6J | Model: Adventurer 5M | PartNumber: Adventurer 5M | Ean: 6937120306863
✅ 【Your Smart Choice】 -Offers Rapid Nozzle Changes In 3 Seconds, A High-Flow 32Mm³/S Nozzle For Stable High-Speed Printing With A Quick 35-Second Warm-Up To 200°C, Dual-Sided Pei Platform For Easy Removal, And Multiple Platform Options, It's A Smart And Efficient Choice For Creative Projects..
✅ 【Efficient After-Sales Support】 -All Of Our 3D Printers Provide One Month Free Return And Exchange. Lifetime Technical Support, A One-Year Warranty And Reliable 12-Hour Response Service. At Flashforge, Zero Risk Purchase Is For Every Customer's Smiles..
✅ 【Superior Print Quality And Adaptability】 -Dual-Fan Nozzles, Vibration Compensation, Multiple Nozzle Sizes (0.25, 0.4, 0.6, 0.8Mm), And A 280°C Direct Extruder Cater To Various Materials. From Intricate Details To Rapid Prototypes, Superior Results Are Guaranteed..
✅ 【Swift And Smart Printing 】 -This Printer Excels In Efficiency And Intelligence. Its Core Xy Structure Enables Travel Speeds Of Up To 600Mm/S, Ensuring Rapid Yet Accurate Printing. It Also Supports The Use Of A Mobile App-Flash Maker, Allowing For Remote Real-Time Monitoring Of Print Progress, Adjustment Of Parameters, Receiving Message Alerts, And Other Functionalities. These Features Enable Intelligent Operation, Ensuring Seamless And Uninterrupted Printing..
Features
- One-Click Automatic Printing -Experience the future of 3D printing with the Adventurer 5M Series. Ensure impeccable bed leveling every time you print, without the need for manual adjustments. Effortlessly achieve consistent adhesion and flawless first layers, saving time and eliminating frustration.
- Swift and Smart Printing -This printer excels in efficiency and intelligence. Its Core XY structure enables travel speeds of up to 600mm/s, ensuring rapid yet accurate printing. It also supports the use of a mobile app-Flash Maker, allowing for remote real-time monitoring of print progress, adjustment of parameters, receiving message alerts, and other functionalities. These features enable intelligent operation, ensuring seamless and uninterrupted printing.
- Your Smart Choice -Offers rapid nozzle changes in 3 seconds, a high-flow 32mm /s nozzle for stable high-speed printing With a quick 35-second warm-up to 200 C, dual-sided PEI platform for easy removal, and multiple platform options, it's a smart and efficient choice for creative projects.
- Superior Print Quality and Adaptability -Dual-fan nozzles, vibration compensation, multiple nozzle sizes (0.25, 0.4, 0.6, 0.8mm), and a 280 C direct extruder cater to various materials. From intricate details to rapid prototypes, superior results are guaranteed.
- Efficient After-sales Support -All of our 3d printers provide one month free return and exchange. Lifetime technical support, a one-year warranty and reliable 12-hour response service. At FLASHFORGE, zero risk purchase is for every customer's smiles.
- See more on Amazon...
Brand: FLASHFORGE | Manufacturer: Zhejiang Flashforge 3D Technology Co., Ltd.
Dimensions: 17.64 x 15.83 x 14.29 inches | Weight: 23.80 pounds
Warranty: A Year
See On Amazon #16
eSUN PLA PRO (PLA+) 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, 1kg Spool, 1.75mm, Black
Asin: B01EKEMDA6 | Model: FBA_IG-C-PLAPRO175B1 | PartNumber: FBA_IG-C-PLAPRO175B1 | Ean: 0856501006221 | UPC: 856501006221
1.75Mm Filament Diameter (Dimensional Accuracy +/- 0.03Mm).
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Recommended Extrusion/Nozzle Temperature 205C - 225C.
Esun Pla Pro 3D Printer Filament Vacuumed Sealed With Desiccant. Superb Layer Bonding. Several Times Stronger Than Pla..
Features
- 1KG net (approximately 2.2 lbs) PLA Filament with Black Spool
- eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA.
- 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
- Recommended Extrusion/Nozzle Temperature 205C - 225C
- Spool Diameter: 8 - Spool Width: 2.50 - Spool Hub Hole Diameter: 2.05 - Inner Circle Diameter: 3.5
- See more on Amazon...
Brand: eSUN | Manufacturer: eSUN
Weight: 2.20 Pounds
See On Amazon #17
Gizmo Dorks PLA Filament for 3D Printers 1.75mm 200g, 4 Color Pack Multicolor- Blue, Green, Orange, Red
Asin: B074W1XFRX | Model: HY-02-PLA-175-4PK-02 | PartNumber: HY-02-PLA-175-4PK-02 | Ean: 0887503180565 | UPC: 887503180565
Net Weight: 200 Grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25".
Perfect Compliment To Sample Colors For Your 3D Printer Or 3D Pen. Each Spool Contains 200G And Included Colors Are Blue, Green, Orange, And Red.
Pla Filament Is Compatible With Various 3D Printers Such As The Creality Ender 3, Anycubic, Prusa, Flashforge, Monoprice, And Many More.
Recommended Nozzle Temperature: 205 - 225 C; Filament Diameter - 1.75Mm +/- 0.03Mm.
Features
- PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant.
- Recommended Nozzle Temperature: 205 - 225 C; Filament diameter - 1.75mm +/- 0.03mm
- Net weight: 200 grams / Spool Diameter: 6 / Spool Width: 1.5 / Spool Hub Diameter: 2.25
- PLA filament is compatible with various 3D printers such as the Creality Ender 3, Anycubic, Prusa, Flashforge, Monoprice, and many more
- Perfect compliment to sample colors for your 3D printer or 3D pen. Each spool contains 200g and included colors are Blue, Green, Orange, and Red
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 6.00 x 6.00 x 6.00 Inches | Weight: 2.70 pounds
See On Amazon #18
ANYCUBIC PLA Plus (PLA+) 3D Printer Filament 1.75mm, High Toughness 3D Printing Filament, Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, 1KG Spool, Gray
Asin: B0CF1SXM5N
【No Clogging, No Bubbles】Without Any Clogging Or Bubbles, Anycubic Pla Plus Filament Guarantees A Seamless Extrusion Of Filament, Resulting In A Refined And Consistent Finish For The Completed Model..
【High Compatibility】Ensuring Compatibility With Most Of Fdm 3D Printers And 3D Printing Pens Available In The Market. Our Vacuum Packaging Effectively Shields Against Moisture And Dust, Ensuring An Enhanced Printing Experience..
【 Without Tangle Hassles】Anycubic 3D Printing Pla Plus Filament Is Without Tangle Hassles On The Roll And Easily Left The Spool Without Crossing Turns Which Can Result In Less Thread Pulling And Twisting, No Clogging. Besides, It Can Easily Lock The Filament After Use..
【High Dimensional Accuracy】The Winding Of Anycubic Pla Plus 3D Filament 1.75Mm Is Tidy And Maintains Dimensional Stability, With A Controlled Wire Diameter Tolerance Of ±0.02 Mm. Its High Precision And Minimal Shrinkage Work Together To Prevent Cracks And Warping..
Features
- High Toughness Anycubic PLA Plus 3D Printer Filament is developed with high toughness and certain impact resistance, not easy to break when subjected to external force. At the same time prints smoothly with few layers, suitable for making models of handicrafts, artworks, engineering parts, and so on.
- High Dimensional Accuracy The winding of Anycubic PLA Plus 3D Filament 1.75mm is tidy and maintains dimensional stability, with a controlled wire diameter tolerance of 0.02 mm. Its high precision and minimal shrinkage work together to prevent cracks and warping.
- No Clogging, No bubbles Without any clogging or bubbles, Anycubic PLA Plus Filament guarantees a seamless extrusion of filament, resulting in a refined and consistent finish for the completed model.
- Without Tangle Hassles Anycubic 3D Printing PLA Plus Filament is without tangle hassles on the roll and easily left the spool without crossing turns which can result in less thread pulling and twisting, no clogging. Besides, it can easily lock the filament after use.
- High Compatibility Ensuring compatibility with most of FDM 3D printers and 3D printing pens available in the market. Our vacuum packaging effectively shields against moisture and dust, ensuring an enhanced printing experience.
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 2.87 x 4.22 x 4.22 inches | Weight: 2.20 pounds
See On Amazon #19
[Upgraded with Fan] 2024 SUNLU Official Filament Dryer Box S2 for 3D Printer Filament, Upgrade Filament Storage Dehydrator for PLA PETG ABS Nylon PA Filament 1.75 2.85 3.00mm
Asin: B0BM97WX1D | Model: S2 | PartNumber: S2 | Ean: 0783970261342 | UPC: 783970261342
✅【Easy To Use & Quality Guaranteed】 Allows You To Print While Drying. 2 Inch Large Lcd Screen Monitor,Able To Display Temperature&Time Clearly And Brightly. Decrease Noise When Printing (Less Than 10Db While Operating)..
✅【Drying & Printing At One Time】The Feed-Out Coil Also Allows The Filament To Continue To Dry In The Dryer As It's Being Fed To The Printer. This Means That The Filament Will Be Dry And Ready To Use When It Reaches The Printer..
✅【Wide Compatibility Range】Compatible With A Wide Range Of Filament Brands And Diameters. It Can Work With All Mainstream 3D Filament Brands And All Standard Filament Diameters Of 1.75Mm/2.85Mm/3.00Mm. This Means That It Can Be Used With A Variety Of Filaments, Including Pla, Pla+, Petg, Tpu, Abs, And Even High-End Filaments Like Pa And Pc. This Makes It A Versatile And Convenient Option For Users Who Want To Dry Their Filament..
✅【Touch Screen & Easy Operation】3D Filament Dry Box S2 Has A New Touch Screen That Is Designed To Provide A Tablet-Like Operation Experience For The User. The Screen Is 3.42*2.87 Inches In Size, Which Makes It Easy To Navigate And Use. The Touch Screen Also Allows User To Easily Switch Between ℃ And ℉ And Offers One-Key Recommended Temperature Settings For Different Types Of Filament. This Makes It Easy For The User To Set The Appropriate Drying Temperature For Their Filament..
Features
- Keep Filaments Strong & Flexible By Using SUNLU Filament Dryer Box S2 to removing moisture from the filament before it's used in the 3D printer, S2 filament dryer helps to ensure that the filament will be dryed. which will result in better print quality and fewer failed prints. This is important in save time, money, and frustration by improving the reliability and consistency of their 3D printing process.
- Touch Screen & Easy Operation 3D filament dry box S2 has a new touch screen that is designed to provide a tablet-like operation experience for the user. The screen is 3.42*2.87 inches in size, which makes it easy to navigate and use. The touch screen also allows user to easily switch between and and offers one-key recommended temperature settings for different types of filament. This makes it easy for the user to set the appropriate drying temperature for their filament.
- Easy to Use & Quality Guaranteed Allows you to print while drying. 2 inch large LCD screen monitor,Able to display temperature&time clearly and brightly. Decrease Noise when Printing (less than 10db while operating).
- Wide Compatibility Range compatible with a wide range of filament brands and diameters. It can work with all mainstream 3D filament brands and all standard filament diameters of 1.75mm/2.85mm/3.00mm. This means that it can be used with a variety of filaments, including PLA, PLA+, PETG, TPU, ABS, and even high-end filaments like PA and PC. This makes it a versatile and convenient option for users who want to dry their filament.
- Drying & Printing at One Time The feed-out coil also allows the filament to continue to dry in the dryer as it's being fed to the printer. This means that the filament will be dry and ready to use when it reaches the printer.
- See more on Amazon...
Brand: UNIDO | Manufacturer: SUNLU INC.,
Warranty: 2 year manufature
See On Amazon #20
Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
Asin: B07WHYBVJ5 | Ean: 6973298330811
Work Better. It Makes Loading The Filament Easier And Smoother, No Worries About Filament Scraping Or Breaking..
Easy To Install. This Extruder Diy Kit Comes With An Instruction Of How To Put It Together, Which Makes It More Easy To Install..
Fits 1.75Mm Filament. 40 Teeth Drive Gear Compatible With Pla/Abs/Wood/Tpu/Pteg. Please Note: Some Printer Models Like Ender 3 And Edner 3 Pro, Their Original Extrusion Gears Cannot Be Removed, So These Model Printers Do Not Have To Change The Extrusion Screw. Ender 3V2，Its Extrusion Gear Can Be Replaced..
Last Over Years. Made By High Quality Aluminum, Last Much Longer Your Stock Plastic Or 3D Printed Extruder Feeder Drive..
Features
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2 its extrusion gear can be replaced.
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon
Looking For Something Else?
Search