Longer LK5 Pro 3D Printer Fully Open Source Motherboard Upgrade to TMC 2209 4 Silent Driver, DIY for Families and Schools FDM 3D Printers with Large Print Size 11.8x11.8x15.7 Inch
Asin: B0C8HXZMZM
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Ultra-Silent Driver & Open Source Motherboard】 Our 3D Printer Adopts Ultra-Silent Tmc2209 Driver To Give You A Quiet Environment. With The Open Source Firmware, You Can Try Your Fantastic Ideas On Lk5 Pro By Changing The G-Code..
【90% Pre-Assembled & 100% Satisfaction Service】 The Upgraded Longer 3D Printer Is A 90% Pre-Installed Printer, Ferfect For Beginners. We Also Provide The Lifetime Technical Support And 24 Hours Professional Customer Service. If You Have Any Questions During Use, Please Feel Free To Contact Longer's Customer Support Team..
【Filament Exhaustion Detection & Resume Printing Function】 Longer 3D Printer Is Equipped With Filament And Power Detection Sensors, Which Will Intelligently Pause The Printing Process If Encountering Filament Exhaustion Or Unexpected Power Failure. It Can Resume Printing From The Last Printing Position When Power Is Restored, Saving Your Time And Reducing Waste..
【Stable Structure & Higher Precision】 The Printer Uses A Reinforced Design Of Diagonal Bars To Form A Stable Triangular Structure That Minimizes Vibration And Allows For More Stable Printing. Longer 3D Printer Uses Lattice Glass Plate, Which Not Only Makes The Model Easier To Disassemble But Also Makes The Hotbed Flatter, Providing Higher-Quality Prints..
Features
- Larger Build Volume & 180mm/s Fast Printing Longer LK5 Pro 3D printer has a large build volume of 11.8 x 11.8x 15.7in. / 300*300*400mm, a larger creation space to meet more of your 3D printing needs. Featured with a printing speed of 180mm/s that is faster than the industry standard.
- Stable Structure & Higher Precision The printer uses a reinforced design of diagonal bars to form a stable triangular structure that minimizes vibration and allows for more stable printing. Longer 3D Printer uses lattice glass plate, which not only makes the model easier to disassemble but also makes the hotbed flatter, providing higher-quality prints.
- Ultra-Silent Driver & Open Source Motherboard Our 3D printer adopts ultra-silent TMC2209 driver to give you a quiet environment. With the open source firmware, you can try your fantastic ideas on LK5 Pro by changing the G-code.
- Filament Exhaustion Detection & Resume Printing Function Longer 3D printer is equipped with filament and power detection sensors, which will intelligently pause the printing process if encountering filament exhaustion or unexpected power failure. It can resume printing from the last printing position when power is restored, saving your time and reducing waste.
- 90% Pre-assembled & 100% Satisfaction Service The upgraded Longer 3D printer is a 90% pre-installed printer, ferfect for Beginners. We also provide the lifetime technical support and 24 hours professional customer service. If you have any questions during use, please feel free to contact Longer's customer support team.
- See more on Amazon...
Brand: Longer | Manufacturer: LONGER
Dimensions: 23.42 x 24.41 x 7.68 inches
Warranty: 1 year warranty
See On Amazon Similar To Longer LK5 Pro 3D Printer
#1
ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 8.85x8.85x11in Large Printing Size
Asin: B0BJCQ59JS | Model: US-EL-3D-N3P | PartNumber: US-EL-3D-N3P
【Nozzle Kit For Better Printing Effect】The Nozzle Kit Contains A Tc4 Titanium Alloy Throat Pipe, An Aluminum Alloy Flat Heat Sink Structure, And A Brass Nozzle.The Widened Aluminum Heat Sink Paired With The Front Close-Fitting Efficient Cooling Fan For A Better Heat Dissipation Effect And Lower The Temperature Of The Throat Pipe, Thereby Reducing The Possibility Of Nozzle Clogging..
【More Stable Printing】The Z-Axis With Dual Synchronized Lead Screws And Dual-Motor Drive For More Stable Movement Of The Print Head And Higher Printing Accuracy, Avoiding The Printing Deviation Driven By A Single Z-Axis Lead Screw Motor. The 4-Wheel V-Guide Rail Pulley Is Made Of Pom With More Stable Movement, Low Noise, Wear Resistance, And Longer Service Life..
【Smarter Printing Experience】Auto Mesh Bed Leveling Adopts A Non-Contact High Precision Sensor To Automatically Scan 36 (6X6) Points Of The Hotbed And Collect Data In Real-Time, And Then Adjust The Z-Axis Height To Compensate For Any Irregularities And Unevenness Of The Printing Platform. (Only Applicable To Metal Printing Platforms) Smart Resume Printing: The Printer Will Auto-Pause When The Filament Runs Out Or Breaks, And You Can Resume Printing After A Power Outage..
【Dual-Gear Direct Extruder】The New Dual-Gear Direct Drive Extruder Is Made Of Sus303 High-Quality Stainless Steel With A 3:1 Reduction Ratio And Stronger Extrusion Force For Smoother Filament Feeding And More Stable & Accurate Printing, Which Greatly Reduces Nozzle Clogging And Under-Extrusion Issues, Printing Effect Is Better Than Bowden Extruder. Compatible With Multiple Filaments Such As Pla, Tpu, Petg, And Abs..
Features
- Overview of Neptune 3 Pro 225x225x280mm/8.85x8.85x11 inch market mainstream printing size can meet the needs of most users. With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation.
- Dual-Gear Direct Extruder The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS.
- Nozzle Kit for Better Printing Effect The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging.
- Smarter Printing Experience Auto mesh bed leveling adopts a non-contact high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axis height to compensate for any irregularities and unevenness of the printing platform. (Only applicable to metal printing platforms) Smart resume printing: the printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage.
- More Stable Printing The Z-axis with dual synchronized lead screws and dual-motor drive for more stable movement of the print head and higher printing accuracy, avoiding the printing deviation driven by a single Z-axis lead screw motor. The 4-wheel V-guide rail pulley is made of POM with more stable movement, low noise, wear resistance, and longer service life.
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 19.00 x 23.00 x 9.00 Inches | Weight: 22.00 pounds
Warranty: 8 years manufacturer
See On Amazon #2
Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament 3D Printer Extruder Drive Feeder
Asin: B09LQKN5WG | Model: / | PartNumber: /
🎈【Improved Performance】The Optimized Extruder With Metal Extrusion And Original Hotend Kit Pushes The Filament Into The Printer Nozzle, Greatly Making The Metal Extruder Retain Power In Filament Feed-In. And The Beveled Filament Intake Can Prevent Scraping The Filament As It Is Pulled Into The Feeder..
🎈【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
🎈【Easy To Install】Diy Kit And You Need To Assemble By Yourself. The Full Necessary Screws & Parts Kit For The Extruder Is Included. Referring To Instructions Or Our 5Th Picture To Install, It Is Very Easy And Straightforward To Switch To This Upgraded Part On Your Machine..
🎈【Work Better】Our 3D Printer Extruder Kits Have An Adjustable Bolt So That You Can Adjust The Pressure Of The Extruder Gear As Needed. The Extruder Drive Has Better Stronger Pressure Pushing The Filament Into The Printer Nozzle And So Will Improve The Printer's Performance. 40 Teeth Drive Gear Feeds The 1.75Mm Filament, Compatible With Pla/Abs/Wood/Tpu/Pteg..
Features
- Quality Assurance 100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.
- Work Better Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.
- Improved Performance The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
- Easy To Install DIY kit and you need to assemble by yourself. The full necessary screws & parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 4.33 x 3.15 Inches
See On Amazon #3
AMOLEN Glow in The Dark After Absorbing Multicolor Fast Change 3D Printer Filament, 5 Meter Green, Blue and Deep Blue(Purple) Bundle, PLA Filament 1.75mm, 3D Printing Filament 200g X 4 Pack
Asin: B08W252XLF | Model: 3DGW0SET | PartNumber: 3DGW0SET
High Compatibilty- Perfectly Compatible With Most Of The Fdm 3D Printer And 3D Pen, Comgrow Creality Ender, Anycubic, Creality 3D, Sunlu, Eryone, Mynt3d, 3Doodler, 1.75Mm Pla Filament Consistent Diameter, Dimensional Accuracy +/- 0.03Mm.
Vacuum&Reusable Bags - Vacuum Packaging With Desiccant To Keep It Dry And Keep Out Dust.The Bag Has A Sealing Strip,The Pla Filament Can Be Put Back Into The Bag After Use And Sealed For Storage.
Gift For Kid - When Not Glow, The Filament Shows White And Clear, Which Is Very Suitable For Painting. Your Child Can Paint It With Any Colors. It Will Stimulate Children's Imagination, Creativity And Practical Ability. Amolen Glow Pla Filament Is A Wonderful Gift For Children.
Upgrade Glow Filament - Amolen Specializes In Researching Glow In The Dark Filament, Using The Most Advanced Glow Materials, Pla Raw Materials Come From Usa. All The Glow Filaments On The Market Are A Bit Brittle, Please Print With Patience And Keep The Angle Smooth When Feeding.
Features
- Glow PLA Filament - Contains 20% glow powders that glow in the dark after absorbing light energy. Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect, then glow blue filament, glow deep blue purple filament, shiny glow green filament, glow red filament, glow pink filament
- Upgrade Glow Filament - AMOLEN Specializes in researching Glow in the Dark Filament, using the most advanced Glow materials, PLA raw materials come from USA. All the glow filaments on the market are a bit brittle, please print with patience and keep the angle smooth when feeding
- High Compatibilty- Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm
- Gift for Kid - When not glow, the filament shows white and clear, which is very suitable for painting. Your child can paint it with any colors. It will stimulate children's imagination, creativity and practical ability. AMOLEN Glow pla filament is a wonderful gift for children
- Vacuum&Reusable Bags - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage
- See more on Amazon...
Brand: AMOLEN | Manufacturer: AMOLEN
Weight: 1.76 pounds
Warranty: Two Years Warranty
See On Amazon #4
ELEGOO 3D Printer Enclosure, Fireproof and Dustproof 3D Printer Cover Constant Temperature Tent for Neptune 3 Pro/Neptune 4/Neptune 4 Pro/Ender 3/Ender 3 V2/Ender 3 S1/Kobra 2
Asin: B0CP8QHJ3Z
【Better Protection】Limits The Printer And Printing Material Contact With Exterior Elements Such As Dust, Reduce Maintenance Operation And Risk Of Bad Prints.
【User Friendly】Transparent Windows On Top And Front Offer Visibility Of Ongoing Prints, Zipper Opening Design Make A Convenient Access To The Printer. Inner Mesh Pocket Can Be Used To Store Required Tools.
【Easy To Use】5 Minutes Quick Installation And Disassembly, Folding To Storage When You Don’T Need It. The Lightweight And Durable Fiberglass Frame Makes It Easy To Move Anywhere You Want.
【Enhanced Safety】The Enclosure Made Of Aluminum Foil Oxford Cloth, Flame-Retardant, Fireproof And Excellent Heat-Resistant, Absolutely Safe And Durable.
【Wide Compatibility】Size Of The Enclosure Is 25.5”X21.6”X29.5”/650X550x750mm, Perfectly Fit For Neptune 3 Pro/Neptune 4/Neptune 4 Pro/Ender 3/Ender 3 V2/Ender 3 S1/Ender 3 Pro/Kobra 2 And More.
Features
- Stable Print Temperature 3D printing enclosure offers a more stable environment temperature for your printers. Warping and bad adhesion risks are reduced
- Wide Compatibility Size of the enclosure is 25.5 x21.6 x29.5 /650x550x750mm, perfectly fit for Neptune 3 pro/Neptune 4/Neptune 4 pro/Ender 3/Ender 3 V2/Ender 3 S1/Ender 3 Pro/Kobra 2 and more
- Better Protection Limits the printer and printing material contact with exterior elements such as dust, reduce maintenance operation and risk of bad prints
- Enhanced Safety The enclosure made of aluminum foil Oxford cloth, flame-retardant, fireproof and excellent heat-resistant, absolutely safe and durable
- User Friendly Transparent windows on top and front offer visibility of ongoing prints, zipper opening design make a convenient access to the printer. Inner mesh pocket can be used to store required tools
- Easy to Use 5 minutes quick installation and disassembly, folding to storage when you don t need it. The lightweight and durable fiberglass frame makes it easy to move anywhere you want
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #5
AMX3d PTFE Teflon Bowden Tube for 1.75 Filament (2.0mm ID/4.0mm OD) 1.5 Meters White Connector Tubing for 3D Printer
Asin: B01CUPV90M | Model: PRTPTS-BDN15-004 | PartNumber: PRTPTS-BDN15-004 | Ean: 0756519721003 | UPC: 756519721003
High Spec: Withstanding Temperatures Up To 260C, This Bowden Connector Tubing Has A Density Of 2.15-2.20G/Cm3, With A 2Mm Id And 4Mm Od..
Amx3d Accessories: The Best 3D Prints Start With The Best Tools! Amx3d Provides 3D Printing Partsof The Highest Quality. If There Are Any Problems With Your Bowden Tube Just Let Us Know!.
Flexible Tubing: Ptfe Bowden Tubes Offer Impressive Flexibility – Ideal For Smoothly Tracking The Moving 3D Printer Head. Packaged Without Ties To Prevent Crimping..
Low Friction:Made From High Quality, Durable Ptfe, The Teflon Bowden Tube Allows Filament To Slide Better For Smoother Results..
Features
- IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance print quality.
- LOW FRICTION:Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results.
- HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD.
- FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility ideal for smoothly tracking the moving 3D printer head. Packaged without ties to prevent crimping.
- AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems with your Bowden Tube just let us know!
- See more on Amazon...
Brand: AMX3d | Manufacturer: AMX3d
Weight: 0.13 pounds
See On Amazon #6
3Dman 15A 250V Rocker Switch On/Off Power Socket Inlet Module Plug 10A Fuse Switch with 18 AWG Wiring 3 Pin
Asin: B07RRY5MYZ | Ean: 0712317301076 | UPC: 712317301076
Widely Used: 3D Printers, Computer, Home Appliance Or Diy Small Project On Power Supply Distribution And Control..
Plug Type : 3 Pin Iec320 C14..
L X W X H : 5.8 X 4.8 X 3.4Cm / 2.3" X 1.9" X 1.3"..
Inlet Module: Standard Iec320 C14; Installed Fuse: 10A; Rocker Switch: Illuminated To Show Power Status, 6A 250V Ac 10A 125V Ac..
Features
- Pay Attention to: This On/Off Power Socket Switch is installed well in a whole set, it can be used directly when get it , Safe & Convenient for adding 3pcs wires.
- Inlet Module: Standard IEC320 C14; Installed Fuse: 10A; Rocker Switch: illuminated to show power status, 6A 250V AC 10A 125V AC.
- Widely Used: 3D Printers, Computer, home appliance or DIY small project on power supply distribution and control.
- L x W x H : 5.8 x 4.8 x 3.4cm / 2.3 x 1.9 x 1.3.
- Plug Type : 3 Pin IEC320 C14.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #7
Aokin 2 Pcs Bowden PTFE Tubing (1.5m/Pcs Blue) for 1.75mm Filament with 4 Pcs PC4-M6 Fittings and 4 Pcs PC4-M10 Pneumatic Fittings for Creality Ender 3/3 Pro, Ender 5/5 Pro, CR-10/10S 3D Printer, etc
Asin: B07MTHGF7R | Model: 07 | PartNumber: 07 | Ean: 0701715551169 | UPC: 701715551169
Pc4-M6 Fittings: Copper And Plastic Material, Durable And Sturdy; Thread: 6 Mm, Inner Diameter(Blue End): 4Mm, Fit For The Tube Whose Outer Diameter Is 4Mm..
Easy To Install: The Extruder Fittings Are Pc4-M6 And The Hotend Fittings Are Pc4-M10, The Upper Part Can Be Inserted Outer Diameter 4Mm Ptfe Tube And Self-Locking..
Pc4-M10 Fittings: Stainless Steel And Plastic Material, Anti-Oxidation, Anti-Corrosion, And High Hardness; Thread: 10 Mm, Inner Diameter(Black End): 4Mm, Fit For The Tube Whose Outer Diameter Is 4Mm..
Blue Bowden Tube: Durable Ptfe Material, Safe And Odor-Free, Self-Lubricating, High-Temperature Resistance; Inside Diameter 2Mm, Outside Diameter 4Mm..
Features
- Compatibility: fit for 3D Printer 1.75mm Filament and other devices.
- Blue bowden tube: durable PTFE material, safe and odor-free, self-lubricating, high-temperature resistance; Inside diameter 2mm, outside diameter 4mm.
- PC4-M6 fittings: copper and plastic material, durable and sturdy; Thread: 6 mm, inner diameter(blue end): 4mm, fit for the tube whose outer diameter is 4mm.
- PC4-M10 fittings: stainless steel and plastic material, anti-oxidation, anti-corrosion, and high hardness; Thread: 10 mm, inner diameter(black end): 4mm, fit for the tube whose outer diameter is 4mm.
- Easy to Install: the extruder fittings are PC4-M6 and the hotend fittings are PC4-M10, the upper part can be inserted outer diameter 4mm PTFE tube and self-locking.
- See more on Amazon...
Brand: Aokin | Manufacturer: Aokin
See On Amazon #8
Creality K1 Max 3D Printer, 600mm/s Max High-Speed 3D Printers with Auto Leveling, Dual Cooling, Smart AI Function and Out-of-The-Box, Large Printing Size 11.8x11.8x11.8in
Asin: B0C5RFGNDH | Model: K1 Max | PartNumber: K1 Max
Smart Ai Lidar & Camera - The 1Μm Resolution Lidar Will Scan The First Layer On Its Own. It Will Pause Printing And Tell You Immediately If Something Goes Wrong. And K1 Max Uses An Ai Camera To Watch Over Spaghetti Failure, Foreign Objects, Debris, Etc. It Will Alter You When An Error Occurs. It Also Supports Real-Time Monitoring And Creates Time-Lapses For Sharing. Furthermore, The Strain Sensors In The Heatbed Generate An Accurate Leveling Mesh For Auto Compensation..
Note: If You Have A Problem With Nozzle Clogging, Please Check The Following Or Contact Us Directly For Help! A. Upgrade Firmware To 1.3.3.8 B. Use Official Slicing Software For Better Results..
32Mm³/S Flow & Dual Cooling - A New Ceramic Heater Encircling The Hotend Can Melt Various Filaments Instantly. The Dual-Gear Direct Drive Extruder And Titanium Alloy Heartbreak Ensure 32Mm³/S Full-Blast Feeding Flow In Up To 300℃. The Freshly Printed Model Is Cooled Rapidly By Two Fans, One On The Printhead With Directional Air Ducts, And Another In The Build Chamber. The Model Hardens Before Any Stringing And Warping Could Happen..
After-Sale Service - There Are More Than 20 Engineers For After-Sales Service And Provide 24/7 Customer Service With 1-Vear Limited And Lifetime Technical Assistance. Please Contact Us Via "Ask A Question' Directly To Get Professional Assistance..
Out-Of-The-Box - K1 Max Is Assembled And Calibrated Before Shipment, And It Offers A Boot-Up Quick Guide And Allows Self-Test With One Tap. So, Users Can Print Right Out Of The Box. The Creality K1 Max Offers Hands-Free Auto Leveling, The Strain Sensors In The Heatbed Deliver Hands-Free Leveling, While The Ai Lidar Scans The Bed Tilts At A Million Points For More Precise Leveling. Its Heatbed Heats To 60℃ In Just The 90S. Ensuring Perfect Prints Every Time Without The Hassle..
11.8X11.8X11.8In Large Printing Size - The K1 Max Boasts An Impressive Printing Size Of 300×300×300Mm, Allowing For Multiple Models To Be Printed Simultaneously, Significantly Increasing Printing Efficiency. Additionally, Its Print Volume To Printer Size Ratio Can Reach Up To 25.5%, The Biggest Compared With Similar-Sized Printers..
Features
- 600MM/S HIGH-SPEED PRINTING - The Creality K1 Max 3D printer is designed for efficiency, boasting a maximum speed of 600mm/s and 20000mm/s Acceleration, which is 12 times faster than a regular FDM 3D printer. Perfect for professionals and beginners.
- 11.8x11.8x11.8in LARGE PRINTING SIZE - The K1 Max boasts an impressive printing size of 300 300 300mm, allowing for multiple models to be printed simultaneously, significantly increasing printing efficiency. Additionally, its print volume to printer size ratio can reach up to 25.5%, the biggest compared with similar-sized printers.
- SMART AI LIDAR & CAMERA - The 1 m resolution LiDAR will scan the first layer on its own. It will pause printing and tell you immediately if something goes wrong. And K1 Max uses an AI camera to watch over spaghetti failure, foreign objects, debris, etc. It will alter you when an error occurs. It also supports real-time monitoring and creates time-lapses for sharing. Furthermore, The strain sensors in the heatbed generate an accurate leveling mesh for auto compensation.
- OUT-of-THE-BOX - K1 Max is assembled and calibrated before shipment, and it offers a boot-up quick guide and allows self-test with one tap. So, users can print right out of the box. The Creality K1 Max offers hands-free auto leveling, the strain sensors in the heatbed deliver hands-free leveling, while the AI LiDAR scans the bed tilts at a million points for more precise leveling. Its heatbed heats to 60 in just the 90s. Ensuring perfect prints every time without the hassle.
- 32mm /s FlOW & DUAL COOLING - A new ceramic heater encircling the hotend can melt various filaments instantly. The dual-gear direct drive extruder and titanium alloy heartbreak ensure 32mm /s full-blast feeding flow in up to 300 . The freshly printed model is cooled rapidly by two fans, one on the printhead with directional air ducts, and another in the build chamber. The model hardens before any stringing and warping could happen.
- AFTER-SALE SERVICE - There are more than 20 engineers for after-sales service and provide 24/7 customer service with 1-vear limited and lifetime technical assistance. Please contact us via ask a question' directly to get professional assistance.
- Note: If you have a problem with nozzle clogging, please check the following or contact us directly for help! a. Upgrade firmware to 1.3.3.8 b. Use official slicing software for better results.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 18.18 x 17.12 x 20.70 inches | Weight: 39.68 Pounds
Warranty: 1 year
See On Amazon #9
Sovol SV06 Plus 3D Printer with 300 High Temp 250mm/s High Speed All Metal Hotend, Planetary Dual Gear Direct Drive Touch Screen Auto Leveling 32-bit Silent Board, Printing Size 11.8x11.8x13.4 inch
Asin: B0BXKK765N | Model: SV06 Plus | PartNumber: SV06 Plus
【300℃ High Temp Printing】All Metal Hotend Setup Makes It Possible To Print Up To 300℃. No Need To Deal With Ptfe Replacement Anymore, And Even No Need To Flash The Firmware, You Can Print With Different Materials Better And More Easily. ( Enclosure Is Still Needed If You Want To Print Over 260℃.).
【Pei Build Plate】The Flexible Pei-Coated Build Plate With Mesh Surface Design Makes The Prints Can Be Removed Easily Without Any Tools..
【Self-Developed 32-Bit Silent Board】Tmc2209 Driver Makes Sv06 Plus Work Stably And Quietly. Uart Mode Is Available, So That More Modifications Can Be Done Easily For Advanced Users..
【Upgraded 4.3 Inch Touch Screen】Day & Night Modes Can Be Switched Casually. The Unique Sovol Ui And Sensitive Response Bring You Better Experience Than Knob Display..
【25-Point Auto Leveling】With Inductive Sensor, Sv06 Plus Detects The Metal Print Bed Through 25 Points Automatically And Compensate The Unevenness Of The Heated Bed. The Fast, Smart, Precise Detection And Compensation Help You To Get The Bed Leveled Perfectly And Get An Fantastic First Layer. Note: Set The Height Of Initial Layer To 0.3Mm When You Slice That Would Help You To Printer Better Initial Layer And Make The Filament Stick To The Plate Better..
【Planetary Dual Gear Direct Drive】Sovol Self-Developed All Metal Direct Drive Extruder With Planetary Dual Gear Set, Provide Sv06 Plus With Higher Drive Ratio And A Lighter Motor, Helps To Achieve More Accurate Extrusion. Add Large External Knob For Easy Feeding..
【Customer Service】Sovol 3D Printers Come With One-Year Warranty And Lifetime Technical Support. Any Question About Sovol Sv06 Plus 3D Printer, Just Click "Ask A Question" Through Our Storefront's Page, Report An Issue Through The "Your Orders" Page. We Will Fast Respond Within 24 Hours And Try Our Best To Resolve Your Every Issue..
【250Mm/S High Speed High Flow All Metal Hotend】All Metal Hotend With Larger Melt Zone Enables You To Print Faster. High Flow Up To 20Mm³/S To Achieve 250Mm/S Printing Speed That Greatly Reduces The Probability Of Clogging (180Mm/S Recommended For Better Printing Quality). Working With Sv06 Plus Klipper Screen (Does Not Come With The Printer, Need To Purchase Additionally), Sv06 Plus Can Reach A Fast And Upgraded Printing Speed Of 350Mm/S..
Features
- Classic I3 Structure with Larger Volume Different from most 3D printers run by wheels in the market, SV06 Plus has a classic I3 structure which avoids wear and tear of wheels and multiple replacements. 300x300x340mm printing size makes SV06 Plus unique among I3 structure 3d printers. Modular design allows you to assemble SV06 plus within 5 steps easily, more applicable for household use.
- 250mm/s High Speed High Flow All Metal Hotend All Metal Hotend with larger melt zone enables you to print faster. High Flow up to 20mm /s to achieve 250mm/s printing speed that greatly reduces the probability of clogging (180mm/s recommended for better printing quality). Working with SV06 Plus Klipper screen (does not come with the printer, need to purchase additionally), SV06 Plus can reach a fast and upgraded printing speed of 350mm/s.
- 300 High Temp Printing All metal Hotend Setup makes it possible to print up to 300 . No need to deal with PTFE replacement anymore, and even no need to flash the firmware, you can print with different materials better and more easily. ( Enclosure is still needed if you want to print over 260 .)
- Planetary Dual Gear Direct Drive Sovol self-developed All Metal Direct Drive Extruder with planetary dual gear set, provide SV06 plus with higher drive ratio and a lighter motor, helps to achieve more accurate extrusion. Add large external knob for easy feeding.
- Upgraded 4.3 inch Touch Screen Day & Night Modes can be switched casually. The unique Sovol UI and sensitive response bring you better experience than knob display.
- 25-point Auto Leveling With inductive sensor, SV06 Plus detects the metal print bed through 25 points automatically and compensate the unevenness of the heated bed. The fast, smart, precise detection and compensation help you to get the bed leveled perfectly and get an fantastic first layer. Note: Set the height of initial layer to 0.3mm when you slice that would help you to printer better initial layer and make the filament stick to the plate better.
- PEI Build Plate The flexible PEI-coated build plate with mesh surface design makes the prints can be removed easily without any tools.
- Self-developed 32-Bit Silent Board TMC2209 driver makes SV06 Plus work stably and quietly. UART mode is available, so that more modifications can be done easily for advanced users.
- Customer Service Sovol 3d printers come with one-year warranty and lifetime technical support. Any question about Sovol SV06 Plus 3d printer, just click Ask a question through our storefront's page, report an issue through the Your Orders page. We will fast respond within 24 hours and try our best to resolve your every issue.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Dimensions: 13.40 x 11.80 x 11.80 inches | Weight: 30.86 Pounds
See On Amazon #10
Haosegd 3D Printer Filament PLA 1.75mm 3-D Printing Materials 5 Colors Bundle Print Filiment 1.75 mm White Black Red Blue Purple Dimensional Accuracy 0.02mm Fillament Spool Vacuum Packaging 250G X 5
Asin: B08W28YXXP | Model: 1.75mm 3D Printer Filament Bundle | PartNumber: 1.75mm 3D Printer Filament Bundle
【Vacuum-Sealed】3D Printer Pla Fillamentum Is Made Of Biological Materials Extracted And Purified From Corn. Filimate Is Vacuum-Sealed And Has No Bubbles, And Can Be Good Used By You And Your Family Without Bad Smell And Affecting The Health Of You And Your Family..
【1.75 Mm High Precision】Dimensional Accuracy ±0.02 Mm.250G Rolls Include Five Color Assortment -White, Black, Red, Purple, Blue Pla Filament 1.75Mm Included In The Package. Fit For Most Fdm Printer Like Creality Ender Impresora..
【Multicolor To Choose】Haosegd Have White, Black, Red, Blue, Purple, Pink, Green, Orange, Gold, Silver, Yellow, Grey, Brown 3-D Print Fillament In Bundle.Upgraded Luminous Series Also Available Which Glow In The Dark..
【Flexible And Tough】Haosegd 5 Color Pla Filiment1.75 Is Good Winded Without Tangle And Clogging. It Also Has Strong Adhesion, Good Melt, Stable Feeding And No Warpage Etc, Ensuring Its Gorgeous Printing Effect..
Features
- PLA TEMPERATURE SETTING The temperature setting for filiment is 190-230 C for nozzle and 0-80 C for hot bed. Our engineers recommend starters set 200 degree of 3 D print nozzle and 60 degree of hot bed for getting excellent printing effect.
- FLEXIBLE AND TOUGH Haosegd 5 Color pla filiment1.75 is good winded without tangle and clogging. It also has strong adhesion, good melt, stable feeding and no warpage etc, ensuring its gorgeous printing effect.
- VACUUM-SEALED 3D printer PLA fillamentum is made of biological materials extracted and purified from corn. Filimate is vacuum-sealed and has no bubbles, and can be good used by you and your family without bad smell and affecting the health of you and your family.
- MULTICOLOR TO CHOOSE Haosegd have white, black, red, blue, purple, pink, green, orange, gold, silver, yellow, grey, brown 3-D print fillament in bundle.Upgraded luminous series also available which glow in the dark.
- 1.75 MM HIGH PRECISION Dimensional Accuracy 0.02 mm.250g rolls include five color assortment -white, black, red, purple, blue PLA filament 1.75mm included in the package. Fit for most FDM printer like creality ender impresora.
- See more on Amazon...
Brand: Haosegd | Manufacturer: Haosegd
Dimensions: 4.72 x 8.66 x 4.72 inches | Weight: 0.55 pounds
See On Amazon
Looking For Something Else?
Search