BEEYUIHF No Clean Solder Flux Paste for Electronics, Soldering Flux for Circuit Boards and Electrical Copper Pipe Brazing PCB SMD IC BGA CPU (0.63oz/10cc) #8350
Asin: B0CBPLMPL7 | Model: I001-8350-10mL | PartNumber: I001-8350-10mL
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Flow In Soldering - This Solder Flux Has Good Wetting Properties, Which Assists The Adhesion Of The Solder To The Surface Of The Components. This Flux Reduces The Surface Tension Of The Solder And Helps To Optimize The Solder's Adhesion To The Surface Of The Component..
Solder Flux Paste For Electronics: Suitable For Soldering Iron Tip Cleaning,Mobile Phone, Bga Repair, Pc Card And Other Precision Electronic Chip-Level Flux Soldering. Have Strong Oxide Removal Effect To Gold-Copper Alloy Substrate And Wire..
Halogen Free Electrical Flux Paste - The Use Of No-Clean Flux Paste, Halogen-Free, Non-Resistant, Non-Corrosive To The Soldered Electronic Components, The Paste Is Transparent And Fluid After Melting, And Can Be Used Directly After Soldering Paper Towels Or Cleaning Cotton To Wipe Off The Excess Residue Can Be..
Smooth Flow Soldering Flux Paste - This Flux Contains Resin, Which Increases The Adhesion Of The Solder Wire Or Solder Paste, And Protects And Prevents Re-Oxidization Of The Pcb After Soldering. The Resin Also Provides Excellent Retention Of Electronic Components..
Features
- BEEYUIHF Quality Flux Paste- #8350 flux to facilitate the soldering process and achieve the desired soldering results. This flux has no-clean properties and is highly reactive, removing oxidized material from the surface of the electronic component. Only a clean soldering surface will result in a quicker tinning and a better fit.
- Smooth Flow Soldering Flux Paste - This flux contains resin, which increases the adhesion of the solder wire or solder paste, and protects and prevents re-oxidization of the PCB after soldering. The resin also provides excellent retention of electronic components.
- Flow in Soldering - This solder flux has good wetting properties, which assists the adhesion of the solder to the surface of the components. This flux reduces the surface tension of the solder and helps to optimize the solder's adhesion to the surface of the component.
- Halogen Free Electrical Flux Paste - The use of no-clean flux paste, halogen-free, non-resistant, non-corrosive to the soldered electronic components, the paste is transparent and fluid after melting, and can be used directly after soldering paper towels or cleaning cotton to wipe off the excess residue can be.
- Solder Flux Paste for Electronics: suitable for soldering Iron Tip Cleaning,mobile phone, BGA repair, PC card and other precision electronic chip-level flux soldering. Have strong oxide removal effect to gold-copper alloy substrate and wire.
- See more on Amazon...
Brand: BEEYUIHF | Manufacturer: BEEYUIHF
Dimensions: 0.20 x 1.00 x 0.20 Inches | Weight: 0.04 Pounds
See On Amazon Similar To BEEYUIHF No Clean Solder Flux
#1
2 Jar Solder Flux, Flux for Soldering, Rosin Soldering Flux Paste for Lead-Free Electronics Soldering and Soldering DIY (1.2oz/35g in a Jar)
Asin: B08MVXW4RY | Ean: 0727380271850 | UPC: 727380271850
Oxidation Resistance: Anti-Oxidation Effect On Soldering Iron Head Of Gold-Copper Alloy Substrate. Solder Flux For Semi-Solid, Not Easy To Dump..
What You Get: Rosin Soldering Flux Paste * 2, Our 7*24 Friendly Customer Service For Peace Of Mind..
Strong Applicability: Flux Is Suitable For Welding Instruments, Gold, Copper, Tin, Iron And Other Metals. Ideal For Electronic Welding, Repair And Rework..
Non-Corrosive: Rosin Is Not Conductive In Dry Conditions And Has Good Insulation. Is Not Corrosive To Metal Substances Such As Circuit Boards..
Features
- ENOUGHT QUANTITY: The package includes 2 jars of soldering flux. A total of 70 g. Enough quantity for your use.
- NON-CORROSIVE: Rosin is not conductive in dry conditions and has good insulation. Is not corrosive to metal substances such as circuit boards.
- OXIDATION RESISTANCE: Anti-oxidation effect on soldering iron head of gold-copper alloy substrate. Solder flux for semi-solid, not easy to dump.
- STRONG APPLICABILITY: Flux is suitable for welding instruments, gold, copper, tin, iron and other metals. Ideal for electronic welding, repair and rework.
- WHAT YOU GET: Rosin soldering flux paste * 2, our 7*24 friendly customer service for peace of mind.
- See more on Amazon...
Brand: Romeda | Manufacturer: Romeda
See On Amazon #2
MG Chemicals - 8341-10ML 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser (Complete with Plunger & Dispensing Tip)
Asin: B00425FUW2 | Model: 8341-10ML | PartNumber: 8341-10ML | Ean: 0779008834107 | UPC: 779008834107
After Soldering, The Rosin Residue Is Non Corrosive, Non Conducting, Moisture Resistant, And Fungus Resistant.
Thixotropic Paste; Rohs Compliant.
Compatible With Lead Free And Leaded Solder Systems.
Instant Wetting.
Features
- Superior fluxing ability
- Instant wetting
- After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant
- Compatible with lead free and leaded solder systems
- Thixotropic paste; RoHS compliant
- See more on Amazon...
Brand: MG Chemicals | Manufacturer: MG Chemicals
Dimensions: 0.16 x 0.16 x 0.47 inches | Weight: 0.04 pounds
Warranty: warranty@mgchemicals.com
See On Amazon #3
IMPRESA 8oz Liquid Zinc Flux for Stained Glass, Soldering Work, Glass Repair and more - Easy Clean Up - Made in USA
Asin: B07VZM98H7 | Model: ZincFlux | PartNumber: ZincFlux | Ean: 0850008283246 | UPC: 850008283246
Completely Water-Soluble, Making Clean Up Quick And Easy.
Made In The Usa.
Can Be Used With Zinc, Lead And Copper Foil. Wash All Work Within 6-8Hrs..
Includes An Application Brush! Goes On Easy Without Being Runny Or Sloppy..
Features
- All-purpose flux specially formulated for stained glass use
- Includes an application brush! Goes on easy without being runny or sloppy.
- Completely water-soluble, making clean up quick and easy
- Can be used with zinc, lead and copper foil. Wash all work within 6-8hrs.
- Made In The USA
- See more on Amazon...
Brand: IMPRESA | Manufacturer: Impresa
Dimensions: 2.00 x 7.00 x 2.00 inches
See On Amazon #4
Solder Wire Lead Free Rosin Core Flux 0.8mm Electric Solder Fine Sn99 Ag0.3 Cu0.7 Flow 0.032in 0.11lb for Electronics Soldering Unlead 50g
Asin: B07Q167J98
Excellent Performance- High Electrical Conductivity, Good Performance For Electronics Soldering, Standard Spool Packing Easy To Use.
Widely Application- The 0.032In Diameter Solder Wire Is Ideal To Solder The Small Components Or Mcus, Excellent For Electronics Diy Or Repair For Drone, Tv, Laptop, Monitor, Smart Watch, Mobile Phone Etc.
Widely Application- The 0.032In Diameter Solder Wire Is Ideal To Solder The Small Components Or Mcus, Excellent For Electronics Diy Or Repair.
Low Melting Temperature- The Melting Point Temperature At 419F, Suitable For All Soldering Tools.
Features
- LEAD FREE SOLDER- content Sn99 Ag0.3 Cu0.7 Pb Free lead free solder, with rosin core, easy flow, easy soldering, RoHS compliant good for environmental protection
- LOW MELTING TEMPERATURE- The melting point temperature at 419F, suitable for all soldering tools
- EXCELLENT PERFORMANCE- high electrical conductivity, good performance for electronics soldering, standard spool packing easy to use
- WIDELY APPLICATION- the 0.032in diameter solder wire is ideal to solder the small components or MCUs, excellent for electronics DIY or repair
- WIDELY APPLICATION- the 0.032in diameter solder wire is ideal to solder the small components or MCUs, excellent for electronics DIY or repair for Drone, TV, Laptop, Monitor, smart watch, Mobile Phone etc
- See more on Amazon...
Brand: E ENERSYSTEC | Manufacturer: Enersystec Electric Co.,Ltd
See On Amazon #5
Solder Flux Pen (10 ml) I Liquid Solder Flux I Soldering Flux I Electrical Solder I No Clean Liquid Flux I Rosin Flux I Soldering Flux for Electronics I Lead Free Liquid Solder I Flux for Soldering I
Asin: B0CBT3KQDF | Model: 1022 | PartNumber: 1022 | Ean: 7402000174355
✔️Non-Corrosive: Formulation With Neutral Ph, No Corrosion Involve After Soldering Process. Rosin Is Not Conductive In Dry Conditions And Has Good Insulation. Is Not Corrosive To Metal Surfaces Such As Circuit Boards.
✔️Non Toxic: Organic High Purity Formulation, Stable Performance And Low Volatility For Long Use Cycles, No Irritant Smell, Lead-Free, Zinc Chloride-Free And Ammonium Chloride-Free..
✔️Oxidation Resistance: Anti-Oxidation Effect Through Soldering , Desoldering, Rework And Reflow Electronic Processes For Their High Boiling Formulation Components. Giving As A Result Smooth, Shiny And Uniform Soldering Joints..
✔️Enought Quantity: The Package Includes 1 High Quality Pen Container Of Soldering Liquid Flux, 10 Ml Net Volume. Excellent Immersion, Wettability, Chemical And Technical Properties. Thus, Enough Quantity For Your Use. Strong Soldering And Welding Power Resulting Strong Low Residual Joints.
Features
- EXCELLENT QUALITY :High purity, Advanced RMA -Rosin Midly Activated- Liquid flux formula, RoHS Certificate Compliant, Organic, Environmental friendly soldering liquid flux . Formulation for electronic soldering applications. It is effective in removing oxides from Tin-Lead, Lead-free, Gold, Silver and Copper alloys.
- ENOUGHT QUANTITY: The package includes 1 High Quality Pen container of soldering liquid flux, 10 ml net Volume. Excellent Immersion, wettability, chemical and technical properties. Thus, Enough quantity for your use. Strong soldering and welding power resulting strong low residual joints
- NON-CORROSIVE: Formulation with neutral pH, no corrosion involve after soldering process. Rosin is not conductive in dry conditions and has good insulation. Is not corrosive to metal surfaces such as circuit boards
- OXIDATION RESISTANCE: Anti-oxidation effect through soldering , desoldering, rework and reflow electronic processes for their high boiling formulation components. Giving as a result smooth, shiny and uniform soldering joints.
- NON TOXIC: Organic High Purity formulation, stable performance and low volatility for long use cycles, no irritant smell, Lead-free, Zinc Chloride-free and Ammonium Chloride-free.
- See more on Amazon...
Brand: QUIMTECH | Manufacturer: Quimtech
See On Amazon #6
Novacan Old Masters Flux - 8 Oz
Asin: B000N6KR90 | Model: OMFLUX | PartNumber: OMFLUX | Ean: 0798804422257, 0740999620017 | UPC: 740999620017, 798804422257
Cleans Up Easily With Water.
8 Oz.
All-Purpose Zinc Flux.
Brand: Novacan Industries | Manufacturer: Novacan Industries
Dimensions: 7.00 x 4.20 x 6.50 inches | Weight: 0.70 Pounds
See On Amazon #7
No Clean Soldering Flux Paste & Solder Wick, Solder Flux for Electronics Soldering 10cc/Bottle (2PACK), 10Ft Desoldering Wick Braid Remover Solder
Asin: B0CH6LBTK4 | Model: RMA100X2+XXX2530 | PartNumber: RMA100X2+XXX2530
Low Residue: No Clean Solder Wick, As Only A Small Amount Of Residue Is Left After Use, Saving You Time On Cleaning.
Making Tin Removal Easier, This Is An Essential Product For Repairing Electronic Circuit Boards.
High Activity Rosin Can Help To Remove The Oxide Layer On The Welding Surface Easily.
Works Excellent For Desoldering Items.
Features
- Lead-Free, Excellent Wetting, No Need To Clean After Using
- Works Excellent for Desoldering Items
- Low Residue: No Clean Solder Wick, As Only a Small Amount of Residue is Left After Use, Saving You Time On Cleaning
- High Activity Rosin Can Help To Remove The Oxide Layer On The Welding Surface Easily
- Making Tin Removal Easier, This is An Essential Product for Repairing Electronic Circuit Boards
- See more on Amazon...
Brand: Essmetuin | Manufacturer: ZHUOBAO
Dimensions: 4.00 x 1.00 x 2.00 Inches
See On Amazon #8
No Clean Soldering Flux Paste(10CC/Bottle), Rosin Flux For Electronics Soldering, Lead-Free Rosin Soldering Flux For Circuit Boards and Copper Electrical Wire
Asin: B0C5TRJS5H | Model: YZ8020 | PartNumber: YZ8020
Stable Performance And Low Volatility, No Shelf Life, Less Smoke, No Irritant Smell.
For Soldering Ic, Smd, Smt, Bga, Handwork, Phone, Home Appliance Repairing, Removal Smd.
Product Advantages: Pushing-Type Design Smoother Flowing No Wasting During Welding.
Lead-Free, Halogen Free, Non-Corrosive, Good Flow Ability.
Features
- High Purity Rosin Soldering Flux, Good Helper For Repairing And Soldering
- Lead-Free, Halogen Free, Non-Corrosive, Good Flow Ability
- Stable Performance And Low Volatility, No Shelf Life, Less Smoke, No Irritant Smell
- Product Advantages: Pushing-Type Design Smoother Flowing No Wasting During Welding
- For Soldering IC, SMD, SMT, BGA, Handwork, Phone, Home Appliance Repairing, Removal SMD
- See more on Amazon...
Brand: YEZHET | Manufacturer: YEZHET
Dimensions: 0.90 x 1.00 x 2.35 Inches
See On Amazon #9
Thermaltronics TMT-FP-1 Rosin Flux Paste, 2.0 oz (57 g)
Asin: B08GJYQHXZ
Contains 2 Ounces In A 3" Dia X 0.62“ H Can.
No Clean Flux.
Rohs Compliant With Sgs Report.
For Lead & Lead Free Applications.
Features
- Ideal for electronics soldering, repair & rework
- For Lead & Lead free applications
- Contains 2 ounces in a 3 Dia x 0.62 H Can
- RoHS Compliant with SGS Report
- No Clean Flux
- See more on Amazon...
Brand: Thermaltronics | Manufacturer: Thermaltronics
Dimensions: 0.63 x 3.00 x 3.00 Inches | Weight: 3.00 ounces
See On Amazon #10
Solder Wire Rosin Core No Lead Electrical Solder Wire Thin 0.6mm 50g Fine Solder with Flux 2.5 PB Free Sn99 Ag0.3 Cu0.7 Flow 0.11lb Electronics Soldering DIY Repair Tiny Solder
Asin: B07XKHNN2Z
Wire Diameter Is Just 0.6Mm 0.024In, Ideal For Fine Soldering Work, Soldering The Tiny Part.
The Melting Point Temperature At 419F, Suitable For All Soldering Tools, Bright Soldering Pad.
Rohs Compliant Good For Electronics Soldering Task For Pcb, Wire, Smaller Ics, Tiny Resistor.
Alloy Materials Sn99 Ag0.3 Cu0.7, The Ag0.3 Is An Important Material Has Great Electricity Conductivity Which Is Great To Soldering The Amplifier Equipment And Others High End Product.
Features
- Rosin core with flux, well flow during electronics soldering, easy for use, good solder joint
- Alloy materials Sn99 Ag0.3 Cu0.7, the Ag0.3 is an important material has great electricity conductivity which is great to soldering the Amplifier equipment and others high end product
- Wire diameter is just 0.6mm 0.024in, ideal for fine soldering work, soldering the tiny part
- RoHS compliant good for electronics soldering task for PCB, wire, smaller ICs, Tiny resistor
- The melting point temperature at 419F, suitable for all soldering tools, bright soldering pad
- See more on Amazon...
Brand: E ENERSYSTEC | Manufacturer: Enersystec Electric Co.,Ltd
See On Amazon #11
Chip Quik CQ4LF Liquid Flux No-Clean (10ml (0.34oz) Pen)
Asin: B07B53LNGX | Model: CQ4LF | PartNumber: CQ4LF | Ean: 0700254126494 | UPC: 700254126494
Brand: Chip Quik | Manufacturer: Chip Quik
Weight: 0.00 pounds
See On Amazon #12
BEEYUIHF Rosin Soldering Flux, Lead-Free Solder Paste Flux, Flux for Soldering, Rosin Solder Flux For Electronics SMD PCB LED Soldering & Repair (1.76oz/50g)
Asin: B0BN5VMT8W | Model: US-7150-65G | PartNumber: US-7150-65G | Ean: 0643459749573 | UPC: 643459749573
Flux For Soldering Application: Maintenance Drag Soldering, Bga Planting Tin, Maintenance Desoldering, Electronic Components Soldering, Mobile Phone Maintenance, Mobile Phone Chip Maintenance, Led Lighting, Home Appliance Maintenance.Have Strong Oxide Removal Effect To Gold-Copper Alloy Substrate And Wire..
Solder Flux Also A Good Helper For Maintenance Enginee. Rosin Soldering Flux Paste Metal Can Packaging, High-Quality Aluminum Box Packaging, Not Easy To Break..
#7150 Paste Flux Features: Lead-Free, Halogen-Free, Acid-Free, No Cleaning, Less Residue, Easy To Tin, Less Smoke, Help Soldering Firm, Make Soldering Fluidity Better, Slightly Yellow Paste..
Soldering Flux Paste Feature: No Corrosion, High Intensity Joint, Good Immersion, Good Insulation, Good Soldering Properties, Smooth Welding Surface..
Features
- BEEYUIHF #7150 Soldering Paste Net weight: (1.76oz/50g) Rosin Solder Paste Flux, made of no acid, Lead-Free, No-Clean, soldering flux paste which is not easy to dump. Rosin Soldering Paste,High Purity,Good helper for repairing and welding.
- Soldering Flux Paste Feature: No corrosion, high intensity joint, good immersion, good insulation, good soldering properties, smooth welding surface.
- Flux for soldering application: Maintenance drag soldering, BGA planting tin, maintenance desoldering, electronic components soldering, mobile phone maintenance, mobile phone chip maintenance, LED lighting, home appliance maintenance.Have strong oxide removal effect to gold-copper alloy substrate and wire.
- #7150 paste flux features: Lead-free, halogen-free, acid-free, no cleaning, less residue, easy to tin, less smoke, help soldering firm, make soldering fluidity better, slightly yellow paste.
- Solder Flux also a good helper for maintenance enginee. Rosin soldering flux paste metal can packaging, High-quality aluminum box packaging, not easy to break.
- See more on Amazon...
Brand: BEEYUIHF | Manufacturer: BEEYUIHF
Dimensions: 0.20 x 0.50 x 0.20 Inches
See On Amazon #13
No Clean Soldering Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)
Asin: B098X43NQ6
Quality Material: These No Clean Soldering Wicks Are Made Of Quality Copper Wire And Adopt Precise Weaving Technology, Which Can Enhance Tension On The Surface To Absorb Excess Solder; The Liquid Solder Pen Is Made Of Reliable Materials, No Leaking And Safe For Protecting The Flux, Preventing You From Touching The Organic Solvents.
Wide Applications: These Soldering Pens And Braided Solder Wicks Can Be Applied For Laboratory, Computer, Home Repairs And Correcting Small Pcb Board Errors And Through Hole Solder Joints, Electronics Welding, Etc., Bringing A Lot Of Convenience To Your Work And Improving Efficiency.
Practical Tools: 10-Ml Solder Pen With Soft Brush Tip Can Release The Liquid Flow Moderately, Which Can Clean The Components Without Harming The Pcb Board Copper Foil Or Ic Pin; The Solder Remover Wick Features Good Thermal Conductivity And Absorption, Useful To Reduce The Risk Of Thermal Injury To The Circuit Boards.
Suitable Size: The Rosin Pen Measures About 14.3 Cm/ 5.6 Inches In Length, And The Solder Braided Wick Is About 1.5M/ 59 Inches Long And 2.5Mm/ 0.1 Inches Wide, Which Is Convenient To Hold In Hand; Please Check The Size Carefully Before Purchasing.
Features
- Package includes: you will receive 3 pieces of no clean solder pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement
- Suitable size: the rosin pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5m/ 59 inches long and 2.5mm/ 0.1 inches wide, which is convenient to hold in hand; Please check the size carefully before purchasing
- Quality material: these no clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder; The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents
- Practical tools: 10-ml solder pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin; The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards
- Wide applications: these soldering pens and braided solder wicks can be applied for laboratory, computer, home repairs and correcting small PCB board errors and through hole solder joints, electronics welding, etc., bringing a lot of convenience to your work and improving efficiency
- See more on Amazon...
Brand: Ferraycle | Manufacturer: Ferraycle
See On Amazon #14
BEEYUIHF Solder Paste, Electronic Soldering Paste with Flux, Sn64 Bi35 Ag1 Lead-free SMD Solder Paste for PCB IC SMD LED BGA QFN SMT electronics (1.23oz/35g)
Asin: B0CWV3B271 | Model: US-9300-35g | PartNumber: US-9300-35g
Smt Processing Products The More Difficult, The More Important The Choice Of Solder Paste. #9300 Lead-Free Solder Paste, The Cream Is Delicate, Point Coating Uniformity, With Excellent Electrical Properties, In The 0.3Mm Pitch Tiny Pads, Are Able To Show Excellent And Stable Printing Performance, Improve The Quality Of Welding..
#9300 Soldering Paste Mainly Used In The Smt Industry For Pcb Surface Electronic Components Welding Repair, Bga Chip Tinning, Wiring Soldering, Smd Soldering, Cell Phone Repair And So On..
How To Store The Solder Paste: Quality Guarantee Period: 1 Year, Storage Temperature 2~10 °C (35°F~50°F), Can Be Stored For More Than One Year At Room Temperature. If The Solder Paste Is Not Sealed And Preserved Resulting In A Hard Paste, Please Contact After-Sales Customer Service Or Replace It..
Silver-Containing Lead-Free Medium Temperature Solder Paste: Solid Solder Joints, No Bubbles, No Cracks, Smooth, Bright, Full. This Model Has Increased Granularity And Dramatically Improved Conductivity Without A Single False Solder..
Alloy Composition Of Solder Paste Sn64 Bi35 Ag1: 1% Silver Content, Firmness, Conductivity, Better Gloss, Fine Viscosity, Excellent Wettability, Does Not Produce Tin Beads, Very Suitable For Conventional Mobile Phone/Cpu/Ic Repair And Soldering..
Features
- BEEYUIHF #9300 solder paste need to set the temperature of the hot air gun: lead-free solder paste has a low melting point, melting point of 183 degrees, when soldering the hot air gun can be adjusted to 300~350 (572 ~662 ) after preheating the PCB first.
- Alloy composition of solder paste Sn64 Bi35 Ag1: 1% silver content, firmness, conductivity, better gloss, fine viscosity, excellent wettability, does not produce tin beads, very suitable for conventional mobile phone/CPU/IC repair and soldering.
- SMT processing products the more difficult, the more important the choice of solder paste. #9300 lead-free solder paste, the cream is delicate, point coating uniformity, with excellent electrical properties, in the 0.3mm pitch tiny pads, are able to show excellent and stable printing performance, improve the quality of welding.
- Silver-containing lead-free medium temperature solder paste: solid solder joints, no bubbles, no cracks, smooth, bright, full. This model has increased granularity and dramatically improved conductivity without a single false solder.
- #9300 soldering paste Mainly used in the SMT industry for PCB surface electronic components welding repair, BGA chip tinning, wiring soldering, SMD soldering, cell phone repair and so on.
- How to store the solder paste: Quality guarantee period: 1 year, storage temperature 2~10 C (35 F~50 F), can be stored for more than one year at room temperature. If the solder paste is not sealed and preserved resulting in a hard paste, please contact after-sales customer service or replace it.
- See more on Amazon...
Brand: BEEYUIHF | Manufacturer: BEEYUIHF
Dimensions: 1.97 x 1.97 x 0.79 inches
See On Amazon #15
BEEYUIHF No-Clean Soldering Flux Paste, Smooth Flow Solder flux for Soldering, Electronics Flux Paste for PCB/IC/BGA/SMD Repairing DIY (10mL Syringe) #8403 (1 Pack)
Asin: B0CC1LGBVV | Model: US-8403 | PartNumber: US-8403
The Most Prominent Role Of #8403 Flux Is To Remove Oxidation,Soldering Flux Is A Kind Of Chemical Substances To Promote Soldering, Have To Remove The Surface Of The Solder Material Oil, Remove The Oxide Film, Increase The Role Of The Soldering Area. Flux Paste Also Has The Role Of Protecting Components And Preventing Re-Oxidation. Flux Is An Indispensable Auxiliary Material In Soldering And Repair, To Achieve Better Soldering And Repair Results..
#8403 Soldering Flux Paste Product Applications: Applicable To Sensors, Wires, Motors, Fuses, Connectors, Metal Shells, Lighting, Electronic Components, Smt Repair, Bga Chip Ball Implantation, Etc..
#8403 Solder Flux Main Function Is To Reduce The Surface Tension Generated By The Contact Between The Solder And The Lead Pin Metal, Enhance The Surface Wetting Force, And Enhance The Penetration Of The Organic Activator, Which Is The Key Role Of Flux. Flux Paste Is Fine And White, With Very Little Residue, And Can Achieve The Performance Of No Clean..
How To Use Electronics Flux: Wipe The Electronic Components And Their Printed Circuit Board Clean Before Soldering, Squeeze The Right Amount Of Flux On The Surface Of The Components Or Wire, Heat Up The Soldering Iron To 200 ℃ Or More, And Then The Tin Will Be Melted In The Solder. After Adding Flux, It Is Very Easy To Put On The Tin, And The Structure Of The Solder Joint Is Very Full And Strong And Bright..
Features
- BEEYUIHF #8403 is made of No clean, halogen free, acid free, non-corrosive flux, white paste, good fluidity, moderate viscosity, less residue, less smoke, suitable for cell phone PCB, BGA and PGA and other SMD ball array solder joints rework and ball patching.
- How to use electronics flux: wipe the electronic components and their Printed Circuit Board clean before soldering, squeeze the right amount of flux on the surface of the components or wire, heat up the soldering iron to 200 or more, and then the tin will be melted in the solder. After adding flux, it is very easy to put on the tin, and the structure of the solder joint is very full and strong and bright.
- The most prominent role of #8403 flux is to remove oxidation,soldering flux is a kind of chemical substances to promote soldering, have to remove the surface of the solder material oil, remove the oxide film, increase the role of the soldering area. Flux paste also has the role of protecting components and preventing re-oxidation. Flux is an indispensable auxiliary material in soldering and repair, to achieve better soldering and repair results.
- #8403 solder flux main function is to reduce the surface tension generated by the contact between the solder and the lead pin metal, enhance the surface wetting force, and enhance the penetration of the organic activator, which is the key role of flux. Flux paste is fine and white, with very little residue, and can achieve the performance of No clean.
- #8403 soldering flux paste product applications: applicable to sensors, wires, motors, fuses, connectors, metal shells, lighting, electronic components, SMT repair, BGA chip ball implantation, etc.
- See more on Amazon...
Brand: BEEYUIHF | Manufacturer: BEEYUIHF
Dimensions: 0.20 x 1.00 x 0.20 inches | Weight: 0.04 pounds
See On Amazon #16
4-in-1 welding tool set, soldering iron tip cleaner + 0.6mm solder wire (1.76 oz / 50 g) + Rosin Solder Flux Paste (0.35 oz / 10 g), no-clean soldering core (2.0mm, 29.5 inches)
Asin: B07XZHN4W6 | Model: 01 | PartNumber: 01 | Ean: 0783710641281 | UPC: 783710641281
Rosin - Weighs 0.35 Oz/10 G. Promote The Flow Of Solder, Improve The Efficiency Of Welding Process, Allow Solder To Form Solid, Less Residue, No Need To Clean, Lasting Mechanical And Electrical Connections..
Welded 4-In-1 Set Contains 4 Necessary Welding Products, Saving You Time To Purchase Multiple Times.Warning:This Product Contains Lead, Be Aware Of Cancer And Reproductive Harm - For More Information:Www.P65warnings.Ca.Gov.
No-Clean Desoldering Core - 2.0Mm Wide And 29.5 Inches Long, Made Of Pure Oxygen-Free Copper Wire, It Has Strong Ability To Absorb Tin. No Cleaning, Low Residue. Removes More Solder Than Traditional Wicks, Making It Easy To Correct Errors On Small Pcb Boards..
Solder Wire - Weight 1.76 Oz / 50 G. Good Fluidity, Uniform Heating, Uniform Solder Joints, Clean, Contribute To The Rapid Completion Of Welding..
Features
- Soldering Iron Tip Cleaner - the best Soldering iron Tip Cleaner and base, no water,does not reduce the tip temperature. Made of brass wire, it is cleaner than traditional sponges. Safe and clean to use.
- Solder wire - weight 1.76 oz / 50 g. Good fluidity, uniform heating, uniform solder joints, clean, contribute to the rapid completion of welding.
- Rosin - weighs 0.35 oz/10 g. Promote the flow of solder, improve the efficiency of welding process, allow solder to form solid, less residue, no need to clean, lasting mechanical and electrical connections.
- No-clean desoldering core - 2.0mm wide and 29.5 inches long, made of pure oxygen-free copper wire, it has strong ability to absorb tin. No cleaning, low residue. Removes more solder than traditional wicks, making it easy to correct errors on small PCB boards.
- Welded 4-in-1 set contains 4 necessary welding products, saving you time to purchase multiple times.Warning:This product contains lead, be aware of cancer and reproductive harm - For more information:www.p65Warnings.ca.gov
- See more on Amazon...
Brand: YCD | Manufacturer: YCD
Weight: 0.11 Pounds
See On Amazon #17
BEEYUIHF 3M/10ft 2.5mm Desoldering wick Braid, Solder wick Braid with Flux, No-clean Solder Remover wire Kit,Cable Remover Tool Solder Sucker,w 0.10'' L 9.8' (1 Piece 2.5mm 3m)
Asin: B0CB3QGXR8 | Model: US-RX2530 | PartNumber: US-RX2530
Desoldering Wick Advantage: Refined Chemical Formula, Resistant To Oxidation And Corrosion,Clean Tin Absorption.Fast Heat Conduction, Suitable For Various Electronic Pcb Circuit Boards..
Solder Wick Braid Wide Range Of Use: The Braided Solder Wick Is Suitable For Studio, Laboratory, School, Home, Professional Repair, Diy Hobbyist And Industrial Soldering Work; And The Wick Is Designed With Fine Weave, Increase The Speed Of Cleaning The Pcb Pad. Bring Convenience To Your Welding Work..
The Desoldering Wicks Feature: Oxidation Resistivity And Anti-Corrosion Protection,Good Thermal Conductivity. Speed Up The Speed Of Absorbing Tin And Low Residue Of Flux. Increase The Speed Of Cleaning The Pcb Pad..
Solder Remover Wire Materials：The Tin Suction Line Is Woven With Flat Needles, Soft Design,Fast Heat Conduction, Suitable For Rapid Tin Suction, Not Only Improving Work Efficiency And Quality, But Also More Clean.The Braided Desoldering Wicks Are Made Of 100% Copper Wires With A Fine Braid Design..
Features
- BEEYUIHF Desoldering wick with flux Size: w 0.10'' L 9.8'; width:2.5mm, Length: 3M/10ft
- Solder Remover wire Materials The tin suction line is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also more clean.The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
- Desoldering wick advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards.
- The desoldering wicks Feature: Oxidation resistivity and anti-corrosion protection,good thermal conductivity. Speed up the speed of absorbing tin and low residue of flux. Increase the speed of cleaning the PCB pad.
- Solder wick Braid wide range of use: The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
- See more on Amazon...
Brand: BEEYUIHF | Manufacturer: BEEYUIHF
Dimensions: 0.20 x 0.20 x 0.20 inches
See On Amazon #18
VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1
Asin: B0B1PFSFQT | Model: SW-2530 | PartNumber: SW-2530 | Ean: 0195893076680 | UPC: 195893076680
The Ergonomic Design Of The Solder Flux Remover Desoldering Wick Ensures That It Will Leave Little To No Residue After Use, And The Residues That Are Left Behind Are Non-Conductive And Halide-Free.
The Solder Tape Will Absorb The Solder, Leaving Your Circuit Board Clean And Free Of Unwanted Solder. So Why Wait? Get The Viralloy No Clean Desolder Wick Today And Make Desoldering A Breeze!.
Plus, The Flux For Soldering Copper Soldering Wick Is Easy To Use - Simply Place It Over The Area Where You Want To Remove The Solder And Heat It Up.
Made From Pure Copper Wires Woven Together With A No-Clean Flux Formula, This Solder Braid Wick Is Designed To Absorb And Remove Solder From Your Circuit Boards Quickly And Easily.
Features
- Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!
- Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily
- The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free
- Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up
- The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!
- See more on Amazon...
Brand: VIRALLOY | Manufacturer: VIRALLOY
Dimensions: 0.39 x 2.12 x 2.12 inches
See On Amazon #19
Cj's Flux Remover - 8 Oz
Asin: B00UB1ZH1K | Model: CFR8 | PartNumber: CFR8
Brand: soikoi
Dimensions: 2.00 x 7.00 x 2.00 inches
See On Amazon #20
BEEYUIHF No-Clean Soldering Flux Paste, flux for Soldering, Solder Paste for Electronics PCB/IC/BGA/SMD Repairing (5.15oz/146g)
Asin: B0C23XK9V4 | Model: US-9530-100G | PartNumber: US-9530-100G
No Clean Industrial Grade Solder Flux Advantage: Lead-Free, No-Clean, Halogen-Free, Acid-Free, No Corrosion, High Intensity Joint, Good Immersion,Good Insulation, Very Little Residue, Easy To Tin, Help Soldering Firm, Make Soldering Fluidity Better, Slightly Yellow Paste..
About Our #9530 Soldering Flux Paste: No Clean Flux Paste. Convenient Syringe Dispenser Ideal For Touch Up And Repair Of Surface Mount Assemblies..
Soldering Flux Paste Application: Mobile Phone Repair, Computer And Digital Service Industries, High-Precision Circuit Board Smt Soldering, Bga Welding Process, Maintenance Drag Soldering, Bga Planting Tin, Maintenance Desoldering, Electronic Components Soldering, Mobile Phone Maintenance, Mobile Phone Chip Maintenance, Led Lighting, Home Appliance Maintenance,Etc..
Rosin Solder Paste Flux, Made Of No Acid, Lead-Free, No-Clean, Soldering Flux Paste Which Is Not Easy To Dump. Rosin Soldering Paste,High Purity,Good Helper For Repairing And Welding.Convenient Syringe Dispenser Ideal For Touch Up And Repair Of Surface Mount Assemblies..
Features
- BEEYUIHF Solder paste flux: Net weight: (3.52oz/100g); Gross weight: (5.15oz/146g)
- Rosin Solder Paste Flux, made of no acid, Lead-Free, No-Clean, soldering flux paste which is not easy to dump. Rosin soldering paste,high purity,good helper for repairing and welding.Convenient syringe dispenser ideal for touch up and repair of surface mount assemblies.
- No clean Industrial grade Solder Flux advantage: Lead-Free, No-clean, halogen-free, acid-free, no corrosion, high intensity joint, good immersion,good insulation, very little residue, easy to tin, help soldering firm, make soldering fluidity better, slightly yellow paste.
- Soldering flux paste application: Mobile phone repair, computer and digital service industries, high-precision circuit board SMT soldering, BGA welding process, Maintenance drag soldering, BGA planting tin, maintenance desoldering, electronic components soldering, mobile phone maintenance, mobile phone chip maintenance, LED lighting, home appliance maintenance,etc.
- About our #9530 soldering flux paste: No Clean flux paste. Convenient syringe dispenser ideal for touch up and repair of surface mount assemblies.
- See more on Amazon...
Brand: BEEYUIHF | Manufacturer: BEEYUIHF
Dimensions: 1.00 x 2.00 x 1.00 Inches | Weight: 0.22 Pounds
See On Amazon
Looking For Something Else?
Search