uxcell #25 Chain Roller Sprocket, 5mm Bore 1/4" Pitch 12 Tooth Single Strand Chain Sprocket, C45 Carbon Steel 25 Roller Chain Sprocket with Set Screws for ISO 04C Chain, 2Pcs
Asin: B0CD1RHV3X
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Specifications: Number of Teeth: 12, Outside Diameter: 27.5mm / 1.08-inch, Bump Width: 12mm / 0.47-inch, Total Width: 15mm / 0.59-inch, Bore Diameter: 5mm / 0.2-inch, Pitch: 1/4-inch / 6.35mm, Tooth Width: 3mm / 0.12-inch, Set Screw Size: M5, 2 x Chain Sprocket, 4 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 25 Chain Roller Sprocket
#1
uxcell 25 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 15mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09SCSBJRY | Model: a21121100ux0403 | PartNumber: a21121100ux0403
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell ISO/DIN 06B-1 Roller Chain Sprocket B Type 25mm Bore, 3/8" Pitch, A3-Steel Single Strand Roller Sprocket Hardened 20 Tooth
Asin: B0CTMTZXYC
Application: The Sprocket Is Applied In Various Industrial Circumstances, Such As Milling Machines, Drill Presses, And Other Machinery Transmission Operations.
Installation: Chain Sprockets Are Typically Mounted In A Fixed Position On A Stationary Shaft. They Are Secured Using A Keyway And 2Pcs Set Screws Positioned At 90-Degree Intervals, Ensuring A Secure And Convenient Installation Of The Sprocket Onto The Shaft..
Feature: The B-Type Sprocket Is Equipped With A Set Of Teeth On Its Circumference, Connected To Other Gears Through A Fasten. On The Opposite Side, There Is A Hub That Can Accommodate Different Types Of Bushings. It Ensures High Transmission Efficiency When Transferring Energy.
Material: The Sprocket Is Made Of A3-Steel, And The Teeth Are High-Frequency Quenched, Which Exhibits High Hardness And Wear Resistance..
Features
- Size: B type mechanical chain sprockets 20 teeth, 25mm bore, 3/8" (9.252mm) pitch, 8mm keyway, with 2pcs set screws at 90 degrees.
- Material: The sprocket is made of A3-steel, and the teeth are high-frequency quenched, which exhibits high hardness and wear resistance.
- Application: The sprocket is applied in various industrial circumstances, such as milling machines, drill presses, and other machinery transmission operations
- Feature: The B-type sprocket is equipped with a set of teeth on its circumference, connected to other gears through a fasten. On the opposite side, there is a hub that can accommodate different types of bushings. It ensures high transmission efficiency when transferring energy
- Installation: Chain sprockets are typically mounted in a fixed position on a stationary shaft. They are secured using a keyway and 2pcs set screws positioned at 90-degree intervals, ensuring a secure and convenient installation of the sprocket onto the shaft.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell 9 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 5mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09QSNNL7N | Model: a21121100ux0270 | PartNumber: a21121100ux0270
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell #25 Chain Roller Sprocket, 6mm Bore 1/4" Pitch 9 Tooth Single Strand Chain Sprocket, C45 Carbon Steel 25 Roller Chain Sprocket with Set Screws for ISO 04C Chain, 2Pcs
Asin: B0CD1S8TJT
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Specifications: Number of Teeth: 9, Outside Diameter: 21mm / 0.83-inch, Bump Width: 8.5mm / 0.33-inch, Total Width: 15mm / 0.59-inch, Bore Diameter: 6mm / 0.24-inch, Pitch: 1/4-inch / 6.35mm, Tooth Width: 3mm / 0.12-inch, Set Screw Size: M5, 2 x Chain Sprocket, 4 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell #25 Chain Roller Sprocket, 5mm Bore 1/4" Pitch 10 Tooth Single Strand Chain Sprocket, C45 Carbon Steel 25 Roller Chain Sprocket with Set Screws for ISO 04C Chain, 2Pcs
Asin: B0CD1TFGT6
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Specifications: Number of Teeth: 10, Outside Diameter: 23.5mm / 0.93-inch, Bump Width: 9.5mm / 0.37-inch, Total Width: 15mm / 0.59-inch, Bore Diameter: 5mm / 0.2-inch, Pitch: 1/4-inch / 6.35mm, Tooth Width: 3mm / 0.12-inch, Set Screw Size: M5, 2 x Chain Sprocket, 4 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell #25 Chain Roller Sprocket, 10mm Bore 1/4" Pitch 15 Tooth Single Strand Chain Sprocket, C45 Carbon Steel 25 Roller Chain Sprocket with Set Screws for ISO 04C Chain, 2Pcs
Asin: B0CD1S31NQ
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Specifications: Number of Teeth: 15, Outside Diameter: 33.5mm / 1.32-inch, Bump Width: 12mm / 0.47-inch, Total Width: 15mm / 0.59-inch, Bore Diameter: 10mm / 0.39-inch, Pitch: 1/4-inch / 6.35mm, Tooth Width: 3mm / 0.12-inch, Set Screw Size: M5, 2 x Chain Sprocket, 4 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell 13 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 10mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09QSPYY7S | Model: a21121100ux0288 | PartNumber: a21121100ux0288
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell 10 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 10mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09QSQ1ZNX | Model: a21121100ux0278 | PartNumber: a21121100ux0278
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #9
uxcell 16 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 15mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09QSQ7PGF | Model: a21121100ux0307 | PartNumber: a21121100ux0307
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell 25 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 19mm Bore Black Oxide C45 Carbon Steel, Keyway with Set Screws for ISO 04C
Asin: B09SCQT519 | Model: a21121100ux0418 | PartNumber: a21121100ux0418
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Keyway With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #11
uxcell #25 Roller Chain Idler Sprocket, 12mm Bore 1/4" Pitch 20 Tooth Sprocket Tensioner, C45 Carbon Steel 25 Roller Chain Sprocket with Bearing for ISO 04C Chain, 2Pcs
Asin: B0CCW4KY1B
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 20; Outside Diameter: 44mm / 1.73-inch; Bump Width: 6mm / 0.24-inch; Total Width: 15mm / 0.59-inch; Bore Diameter: 12mm / 0.47-inch; Pitch: 1/4-inch / 6.35mm; Tooth Width: 3mm / 0.12-inch; 2 x Idler Sprocket
- Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell 22 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 14mm Bore Black Oxide C45 Carbon Steel, Keyway with Set Screws for ISO 04C
Asin: B09RB3GFM2 | Model: a21121100ux0364 | PartNumber: a21121100ux0364
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Keyway With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell 2pcs Sprocket Type B Hub 10mm Bore, 1/4-Inch Pitch, 12 Teeth Stainless Steel Single Strand Roller Sprocket for Chain DIN/ISO No. 04C-1 and ANSI No. #25
Asin: B0CS61TMZX
Application: The Sprocket Is Applied In Various Industrial Circumstances, Such As Milling Machines, Drill Presses, And Other Machinery Transmission Operations..
Installation: Chain Sprockets Are Typically Mounted In A Fixed Position On A Stationary Shaft. They Are Secured Using A Keyway And 2Pcs Set Screws Positioned At 90-Degree Intervals, Ensuring A Secure And Convenient Installation Of The Sprocket Onto The Shaft..
Feature: The B-Type Sprocket Is Equipped With A Set Of Teeth On Its Circumference, Connected To Other Gears Through A Fasten. On The Opposite Side, There Is A Hub That Can Accommodate Different Types Of Bushings. It Ensures High Transmission Efficiency When Transferring Energy..
Material: The Sprocket Is Made Of Stainless Steel, Which Exhibits Excellent Corrosion Resistance, Heat Resistance, Low-Temperature Strength, And Mechanical Properties..
Features
- Size: 12 teeth mechanical roller sprockets with 1/4" (6.35mm) pitch, 7/18" (10mm) inner hole diameter. For more sizes, please refer to the pictures.
- Material: The sprocket is made of stainless steel, which exhibits excellent corrosion resistance, heat resistance, low-temperature strength, and mechanical properties.
- Application: The sprocket is applied in various industrial circumstances, such as milling machines, drill presses, and other machinery transmission operations.
- Feature: The B-type sprocket is equipped with a set of teeth on its circumference, connected to other gears through a fasten. On the opposite side, there is a hub that can accommodate different types of bushings. It ensures high transmission efficiency when transferring energy.
- Installation: Chain sprockets are typically mounted in a fixed position on a stationary shaft. They are secured using a keyway and 2pcs set screws positioned at 90-degree intervals, ensuring a secure and convenient installation of the sprocket onto the shaft.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell 12 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 12mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09QSQN6D4 | Model: a21121100ux0285 | PartNumber: a21121100ux0285
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #15
uxcell #25 Chain Idler Sprocket, 12mm Bore 1/4" Pitch 20 Tooth Tensioner, Black Oxide Finish C45 Carbon Steel with Insert Double Bearing for ISO 04C Chains
Asin: B09PDT5NSV | Model: a21120100ux0222 | PartNumber: a21120100ux0222
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With Double Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 20; Bearing Model: 6901Z; Outside Diameter: 43mm / 1.69-inch; Bump Width: 6mm / 0.24-inch; Total Width: 15mm / 0.59-inch; Bore Diameter: 12mm / 0.47-inch; Pitch: 1/4-inch / 6.35mm; Tooth Width: 3mm / 0.12-inch; 1 x Idler Sprocket
- Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell 25 Tooth Roller Sprocket B Type, 25 Chain Single Strand 1/4" Pitch, 8 x 7.5mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C Chain
Asin: B09SCJ4LG9 | Model: a21121100ux0421 | PartNumber: a21121100ux0421
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Tooth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Tooth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. D Inner Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. D inner hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong Tooth that can latch onto the chain. It is suggested that chain sprockets have at least three Tooth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #17
uxcell #25 Chain Roller Sprocket, 8mm Bore 1/4" Pitch 16 Tooth Single Strand Chain Sprocket, C45 Carbon Steel 25 Roller Chain Sprocket with Set Screws for ISO 04C Chain, 2Pcs
Asin: B0CD1VLZX4
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Specifications: Number of Teeth: 16, Outside Diameter: 35.5mm / 1.4-inch, Bump Width: 12mm / 0.47-inch, Total Width: 15mm / 0.59-inch, Bore Diameter: 8mm / 0.31-inch, Pitch: 1/4-inch / 6.35mm, Tooth Width: 3mm / 0.12-inch, Set Screw Size: M5, 2 x Chain Sprocket, 4 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell 21 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 17mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09RB1F3RG | Model: a21121100ux0357 | PartNumber: a21121100ux0357
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell #35 Chain Idler Sprocket, 10mm Bore 3/8" Pitch 15 Tooth Tensioner, Black Oxide Finished C45 Carbon Steel with Insert Single Bearing for ISO 06C Chains
Asin: B09WYKWM9B | Model: a22011900ux0694 | PartNumber: a22011900ux0694
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Chain Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 15; Bearing Model: 6000ZZ; Outside Diameter: 50mm / 1.97-inch; Bump Width: 5mm / 0.2-inch; Total Width: 14mm / 0.55-inch; Bore Diameter: 10mm / 0.39-inch; Pitch: 3/8-inch / 9.525mm; Tooth Width: 4mm / 0.16-inch; 1 x Idler Sprocket
- Idler sprocket is a chain sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell #25 Chain Roller Sprocket, 10mm Bore 1/4" Pitch 12 Tooth Single Strand Chain Sprocket, C45 Carbon Steel 25 Roller Chain Sprocket with Set Screws for ISO 04C Chain, 2Pcs
Asin: B0CD1V44F4
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Specifications: Number of Teeth: 12, Outside Diameter: 27.5mm / 1.08-inch, Bump Width: 9.5mm / 0.37-inch, Total Width: 15mm / 0.59-inch, Bore Diameter: 10mm / 0.39-inch, Pitch: 1/4-inch / 6.35mm, Tooth Width: 3mm / 0.12-inch, Set Screw Size: M5, 2 x Chain Sprocket, 4 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search