Lithium Battery Energy Transfer Board, 1.2A 14S Active Equalizer Lithiums Battery Active Equalizer Lithium Battery Energy Transfer
Asin: B0CJ9P9JKG | Model: Hilitanduzq75p8sig | PartNumber: Hilitanduzq75p8sig
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Low Consumption: The Smaller The Voltage Difference Between Adjacent Cells, The Smaller The Equalizing Current Of The Equalizer, So The Power Consumption Is Smaller..
Main Application: Battery Active Equalizers Are Primarily Used To Perform Battery Equalization Commonly Found In Li Ion Battery Evs And Electrical Applications..
Automatic Equalization: This Battery Equalizer Is An Inductive Type. When The Voltage Difference Between Adjacent Batteries Reaches More Than 0.1V, The Chip Will Automatically Trigger The Equalization Work..
Protective: This Battery Equalizer Will Pull The Battery Pack Voltage Error Back To An Ideal Value, Protecting The Battery And Reducing Maintenance Costs..
Features
- IMPROVE EFFICIENCY: This high current 1.2A energy transfer battery voltage balancer can significantly balance the battery voltage and improve the overall usage efficiency.
- PROTECTIVE: This battery equalizer will pull the battery pack voltage error back to an ideal value, protecting the battery and reducing maintenance costs.
- LOW CONSUMPTION: The smaller the voltage difference between adjacent cells, the smaller the equalizing current of the equalizer, so the power consumption is smaller.
- AUTOMATIC EQUALIZATION: This battery equalizer is an inductive type. When the voltage difference between adjacent batteries reaches more than 0.1V, the chip will automatically trigger the equalization work.
- MAIN APPLICATION: Battery active equalizers are primarily used to perform battery equalization commonly found in Li ion battery EVs and electrical applications.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon Similar To Lithium Battery Energy Transfer Board
#1
4A Active Equalizer 1mv Precision 8S 10S 14S 16S 20S 22S 24S 24V 48V Li-on Lifepo4 LTO Lithium Battery Capacitor Balancer with Docking Adapter
Asin: B0BNDXLBCN
[Protection Switch]:The Minimum Total Voltage Of The Battery Pack Is Greater Than 30V, The Undervoltage Hibernation Voltage Is 1.5-4.2V, The Static Working Current Is The Balance Of 10Ma, The Balance Of 25M, The Working Environment Temperature Is -20 Degrees To +55 Degrees, There Is No Need For External Power Supply, The Whole Battery Is Balanced By Internal Energy Transfer. Equalizing Capacitor Can Also Be Used In 3S 4S 5S 6S, But Requires The Addition Of An Additional Booster Power Supply..
[Satisfactory Service]: We Provide 24-Hour Online Service,If You Encounter Any Problems, Please Email Seller Support (Not Amazon Support), We Will Give You A Perfect Solution..
[3 Indicator Light]:Blue Bluetooth Status Indicator Steady On: The Bluetooth Connection Is Successful. Blinking: The Bluetooth Link Is Down. Red Fault Status Indicator Steady On, It Indicates An Internal Fault. The Battery Flicker Test Failed. Procedure Green The Working Status Indicator Is Steady On, Indicating That The Balance Is Complete. Flash And Balance Are Working..
[Capacitance Principle]：Cywhrvzsf Capacitive Energy Transfer Balance Board, Capacitor High Precision 1Mv, Point-To-Point Energy Transfer Balance, Patent Balanced Structure Flying Capacitor Method, Combining Point-To-Point Energy Transfer Algorithm To Achieve Efficient Balance, Maximum Balance Current 4A,App Custom Settings :1-4A, Due To The Use Of Constant Current Constant Voltage Technology, Balance Current And Battery Voltage Difference Has Nothing To Do..
Features
- [Product Information]: Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout. With Bluetooth mobile phone English APP function, you can contact us about app use and usage instructions.Model:8S-24S ,Suitable : Lithium Iron Phosphate,Lithium Titanate,NCM Ternary Polymer (NCM/LFP/LTO),Voltage is 1.0 V-4.5V.
- [Capacitance Principle] Cywhrvzsf capacitive energy transfer balance board, capacitor high precision 1mv, point-to-point energy transfer balance, patent balanced structure flying capacitor method, combining point-to-point energy transfer algorithm to achieve efficient balance, maximum balance current 4A,APP custom Settings :1-4A, due to the use of constant current constant voltage technology, balance current and battery voltage difference has nothing to do.
- [Protection Switch]:The minimum total voltage of the battery pack is greater than 30V, the undervoltage hibernation voltage is 1.5-4.2V, the static working current is the balance of 10mA, the balance of 25m, the working environment temperature is -20 degrees to +55 degrees, there is no need for external power supply, the whole battery is balanced by internal energy transfer. equalizing capacitor can also be used in 3S 4S 5S 6S, but requires the addition of an additional booster power supply.
- [3 Indicator Light]:Blue Bluetooth status indicator Steady on: The Bluetooth connection is successful. Blinking: the Bluetooth link is down. Red Fault status indicator Steady on, it indicates an internal fault. The battery flicker test failed. Procedure Green The working status indicator is steady on, indicating that the balance is complete. Flash and balance are working.
- [Satisfactory Service]: We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.
- See more on Amazon...
Brand: Cywhrvzsf | Manufacturer: Equalizer
Dimensions: 1.00 x 3.00 x 4.00 Inches
See On Amazon #2
3S 4S 5A Active Equalizer Whole Group Balancer Lifepo4 Lipo Lto Lithium Active Battery Energy Transfer Equalization Capacitor + Protective Case
Asin: B09QKWH6RL | Model: 3S 4S | PartNumber: 3S 4S | Ean: 0602262884062 | UPC: 602262884062
[Protection Switch]: With Sleep Protection, When The Voltage Is Lower Than 3V, It Will Automatically Stop And Enter The Sleep State To Reduce The Damage To The Battery.With A Protective Case, It Can Better Protect 3S 4S 5A Active Equalizer And Extend Product Life..
[Satisfactory Service]:Protective Case Needs To Be Assembled By Yourself, We Provide 24-Hour Online Service,If You Encounter Any Problems, Please Email Seller Support (Not Amazon Support), We Will Give You A Perfect Solution..
[Original Design]:Using The Original Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Equalizing Current 0-5.5A, The More Balanced The Battery, The Lower The Current.Voltage Is 1.8 V-4.5V ,Suggest Battery Capacity: 60-300Ah..
[Capacitance Principle]: No External Power Supply Is Required,The Working Principle Is Capacitor Fit Transfers The Charge Transporter, Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack.The Equalization Board Can Be Connected To The Battery To Start The Equalization Work..
Features
- [Product Information]: Protective Case needs to be assembled by yourself,After the assembly is completed, tear off the outer yellow film.Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout.Model:3S-4S Suitable : Lithium Iron Phosphate, NCM Ternary Polymer,(Not Fit Lithium Titanate).
- [Capacitance Principle]: No external power supply is required,The working principle is Capacitor fit transfers the charge transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack.the equalization board can be connected to the battery to start the equalization work.
- [Protection switch]: With sleep protection, when the voltage is lower than 3V, it will automatically stop and enter the sleep state to reduce the damage to the battery.With a protective case, it can better protect 3S 4S 5A Active Equalizer and Extend product life.
- [Original Design]:using the original ultra-low internal resistance MOS, 2OZ copper thickness PCB, equalizing current 0-5.5A, The more balanced the battery, the lower the current.Voltage is 1.8 V-4.5V ,Suggest Battery Capacity: 60-300AH.
- [Satisfactory service]:Protective Case needs to be assembled by yourself, We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.
- See more on Amazon...
Brand: Cywhrvzsf | Manufacturer: Cywhrvzsf
See On Amazon #3
15pcs 5V 1A TP4056 Charging Module Type-C USB 18650 Lithium Battery Charger Board with Protection (Type-C USB)
Asin: B08X6G26Q8 | Ean: 0701715460140 | UPC: 701715460140
Application:It Can Charge For Single-Cell Lith Ium Battery Or Multi-Section Parallelled Lith Ium Batteries, Can Be Powered By Usb Ports; The Module With Usb Port, Can Be Directly Input To Do With Rechargeable Lith Ium Battery As A Phone Charger, And Still Retains Voltage Input Wiring Pads, Which Is Convenient For Diy..
Package Includes:15*Tp4056 Type-C Usb Charging Module.
Note:Please Check All Connections Before Charging, It Will Be Damaged If The Load Out Terminal On The Positive And Negative With Wrong Polarity. There Is Not Included Installation Instruction.If You Are The First Time To Do This Job, We Suggest You Can Watch Related Video On Youtube Before Installation..
Power Indicator: Red Is Charging, Green Is Fully Charged..
Features
- Input Voltage: 5V; Max output current: 1A; Charging cut-off voltage: 4.2V 1%; Input interface: Type-C USB
- Power Indicator: Red is charging, Green is fully charged.
- Application:It can charge for single-cell lith ium battery or multi-section parallelled lith ium batteries, can be powered by USB ports; The module with usb port, can be directly input to do with rechargeable lith ium battery as a phone charger, and still retains voltage input wiring pads, which is convenient for DIY.
- Note:Please check all connections before charging, it will be damaged if the load OUT terminal on the positive and negative with wrong polarity. There is not included Installation instruction.If you are the first time to do this job, we suggest you can watch related video on Youtube before installation.
- Package includes:15*TP4056 Type-C USB Charging Module
- See more on Amazon...
Brand: Atnsinc | Manufacturer: Atnsinc
Weight: 0.04 Pounds
See On Amazon #4
3S 4S 12V 5A Battery Active Equalizer BMS Balancer Lipo Li-ion LFP LiFePO4 Lithium Battery Balance Active Energy Transfer Equalization Module Faster Whole Group Capacitor Balancer PCB
Asin: B096NLHXPF | Model: JW-CAP-Balancer-4S | PartNumber: JW-CAP-Balancer-4S | Ean: 0723258876141 | UPC: 723258876141
The Quiescent Current Is About 9Ma, And The Battery Capacity Is Recommended To Be Used Between 30-200Ah/Per Balancer. High-Capacity Batteries Can Be Connected In Parallel With Multiple Equalizers..
【Note】: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Otherwise, It Will Short-Circuit And Burn The Board. Tips: This Balancer Board Is Backward Compatible By Default. Eg. If It Is Used For 3S, The Last Line B4+ Is Empty..
With Under-Voltage Sleep Protection, Only Detecting The Battery Voltage Of B1, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Is Lower Than 2.7V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb. Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.
Features
- Working Voltage: 2.7V-4.2V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4). It can Not fit LTO battery. NOTE Tips Well tested by the manufacturer. As long as the wiring is correct, the product guarantees long-lasting and effective performance. Of course, if customers have any questions, they can take the initiative to contact us, we are absolutely capable of providing more professional answers, rather than a direct refund returns.
- Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB. Balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
- The quiescent current is about 9mA, and the battery capacity is recommended to be used between 30-200AH/Per Balancer. High-capacity batteries can be connected in parallel with multiple equalizers.
- With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
- NOTE : Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board. Tips: This balancer board is backward compatible by default. eg. If it is used for 3S, the last line B4+ is empty.
- See more on Amazon...
Brand: QINIZX | Manufacturer: QINIZX
Dimensions: 0.63 x 2.61 x 1.80 inches
Warranty: Manufacturer warranty for 90 days from date of purchase.
See On Amazon #5
5A 3S 4S 12V Battery Active Equalizer Whole Group Balancer LiFePO4 LFP Lipo Li-ion Lithium Active Battery Energy Transfer Equalization Capacitor Balancer PCB Module with Acrylic Protective Case
Asin: B0BBRNF823 | Model: JWCABalancer-4S | PartNumber: JWCABalancer-4S | Ean: 0789513999000 | UPC: 789513999000
The Quiescent Current Is About 12Ma, And The Battery Capacity Is Recommended To Be Used Between 30-300Ah!.
Note: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Otherwise, It Will Short-Circuit And Burn The Board..
With Under-Voltage Sleep Protection, Only Detecting The Battery Voltage Of B1, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Is Lower Than 2.7V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.
Features
- Working Voltage: 2.7V-4.2V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4). It can Not fit LTO battery. If it is used for 3S, the last line B4+ is empty. (Note: The default protective case is a kit, not assembled, the transparent acrylic case has a yellow protective film that can be peeled off. )
- Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB, balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
- The quiescent current is about 12mA, and the battery capacity is recommended to be used between 30-300AH!
- With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
- Note: Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board.
- See more on Amazon...
Brand: XFYBZN | Manufacturer: XFYBZN
Dimensions: 0.63 x 2.60 x 1.80 inches | Weight: 0.22 pounds
Warranty: Manufacturer warranty for 90 days from date of purchase.
See On Amazon #6
Walfront Battery Active Equalizer Balancer Board Universal Energy Transfer Balancer 12 16S for LPO LFP 1.8V 4.5V
Asin: B09RX1GR4R | Model: Walfront0ghzkvoens6419 | PartNumber: Walfront0ghzkvoens6419
Working Current: Balance Current 0‑5.5A, The More Balanced The Smaller The Current, And The Sleep Mode Current Is Less Than 0.1Ma..
Applicable Battery: The Quiescent Current Is About 12Ma, Recommended To Use Battery With A Capacity Of 60‑300Ah..
Working Voltage: The Working Voltage Is 1.8V‑4.5V, The Balance Voltage Accuracy Is Within 5Mv, With High Efficiency..
High Performance: Adopt New Ultra Low Internal Resistance Mos, And 2Oz Copper Thickness Pcb, Stable In Transmission..
Features
- EASY OPERATION: Connect the lithium battery balance board to the top of the battery to start the balance work.
- HIGH PERFORMANCE: Adopt new ultra low internal resistance MOS, and 2oz copper thickness PCB, stable in transmission.
- WORKING CURRENT: Balance current 0 5.5A, the more balanced the smaller the current, and the sleep mode current is less than 0.1mA.
- WORKING VOLTAGE: The working voltage is 1.8V 4.5V, the balance voltage accuracy is within 5mv, with high efficiency.
- APPLICABLE BATTERY: The quiescent current is about 12mA, recommended to use battery with a capacity of 60 300AH.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
See On Amazon #7
Weewooday Charging Module Battery Charging Board with Battery Protection BMS 5V Micro USB 1A Lithium Battery Charge Module (40 Pieces)
Asin: B08VDL8YFB
Product Information: The Charging Board Inputs With Micro Usb Female, Can Be Directly Inputed To Do With Phone Charger Rechargeable Battery, Still Retains The Input Voltage Wiring Pads, Convenient For You To Diy; Charging Cut-Off Voltage: 4.2V, Max Charge Current: 1000 Ma.
Warm Notice: Please Note That The Charge Should Disconnect The Load Out Terminal On The Positive And Negative Can Not Be Wrong, Please According To Specifications, Otherwise It Will Break Directly; The Ammeter For Testing Current Can Only Be Connected In Series With The 5V Input Terminal Of The Charging Board.
Applicable Occasions: The Battery Charging Board Is Suitable For Single-Cell Lithium Battery Or Multi-Cell Parallel Lithium Battery Charging, And The Charging Port Can Be Powered From Usb, Which Are Convenient For You To Operate.
Functional Usages: Input Voltage Is 5V, Battery Over-Discharge Protection Voltage Is 2.5V, Battery Over Current Protection Current Is 3A; Connect The Battery To The B+ B-, Inserted Into The Usb Female Mobile Phone Charger, The Red Light Is Being Charged And The Green Light To Full.
Features
- Package contents: you will get 40 pieces charging modules in our package, practical tools for you, which can also meet your various needs, enough for you to change and replace
- Functional usages: input voltage is 5V, battery over-discharge protection voltage is 2.5V, battery over current protection current is 3A; Connect the battery to the B+ B-, inserted into the USB female mobile phone charger, the red light is being charged and the green light to full
- Product information: the charging board inputs with micro USB female, can be directly inputed to do with phone charger rechargeable battery, still retains the input voltage wiring pads, convenient for you to DIY; Charging cut-off voltage: 4.2V, max charge current: 1000 mA
- Applicable occasions: the battery charging board is suitable for single-cell lithium battery or multi-cell parallel lithium battery charging, and the charging port can be powered from USB, which are convenient for you to operate
- Warm notice: please note that the charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will break directly; The ammeter for testing current can only be connected in series with the 5V input terminal of the charging board
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
Weight: 0.02 Pounds
See On Amazon #8
4S Li-ion Lipo Lifepo4 LFP Lithium Battery Active Equalizer Balancer BMS 1.2A Balance Energy Transfer Board Inductance Balancing Protection PCB
Asin: B09MSDRCG8 | Model: JWinbalancer-4S | PartNumber: JWinbalancer-4S | Ean: 0721927465894 | UPC: 721927465894
Balance Method: Detect That The Voltage Difference Between Adjacent Batteries Is Greater Than 0.1V To Trigger The Start Of Equalization, And The Adjacent Battery Voltage Difference Is Less Than 0.03V To Stop Working, The Board Enters Under-Voltage Protection Dormant State..
Balance Indication: 1) When The Equalization Light Is On, The Equalization Work Is Turned On; 2)The Equalization Light Goes Out, The Equalization Circuit Sleeps; 3)The Equalization Light Flashes, It Drop Cells, Or The Circuit Is Faulty..
Voltage Balance Accuracy: 30Mv (Typical Value) Between Adjacent Voltages; Balance Current: 0.1V Voltage Difference 0.5A-0.7A Balance Current, The Maximum Balance Current Is 1.2A When The Voltage Difference Is Above 0.2V. The Smaller The Voltage Difference Between Adjacent Batteries, The Smaller The Equalizing Current..
Applicable Battery Type: Ncm(Li-Ion)/Lfp, Not Support Lto; Single Voltage Working Range: 2.0V-4.5V; Static Working Current: 0.01Ma; Suggested Battery Capacity: Below 30Ah, If More Than 30Ah, Pls Choice High Efficiency Flying Capacitance Equalization, Search "B09ms8z58h" To Purchase..
Features
- NOTE: Not recommended to be compatible with low strings, The indicator light will flash and report an error. Before connecting the equalization board, be sure to check whether each battery is wired correctly, and do a good job of insulation. otherwise it will short-circuit and burn the board. If Buyer short-circuits and burns the board, Buyer needs to bear the responsibility instead of returning it. Thank you for acting with conscience.
- Applicable battery type: NCM(Li-ion)/LFP, NOT support LTO; Single voltage working range: 2.0V-4.5V; Static working current: 0.01mA; Suggested battery capacity: below 30AH, If more than 30AH, pls choice high efficiency flying capacitance equalization, search B09MS8Z58H to purchase.
- Balance method: Detect that the voltage difference between adjacent batteries is greater than 0.1V to trigger the start of equalization, and the adjacent battery voltage difference is less than 0.03V to stop working, the board enters under-voltage protection dormant state.
- Voltage balance accuracy: 30mV (typical value) between adjacent voltages; Balance current: 0.1V voltage difference 0.5A-0.7A balance current, the maximum balance current is 1.2A when the voltage difference is above 0.2V. The smaller the voltage difference between adjacent batteries, the smaller the equalizing current.
- Balance indication: 1) When the equalization light is on, the equalization work is turned on; 2)The equalization light goes out, the equalization circuit sleeps; 3)The equalization light flashes, it drop cells, or the circuit is faulty.
- See more on Amazon...
Brand: XFYBZN | Manufacturer: XFYBZN
Dimensions: 0.25 x 2.16 x 0.90 inches
Warranty: 60-day warranty
See On Amazon #9
MakerFocus 15pcs TP4056 Charging Discharging Module Type C Interface with Battery Protection 18650 BMS 5V 1A 18650 Lithium Battery Charging Board
Asin: B0CWNXKR4X | Model: P9S8R16X4908HWS025JI | PartNumber: P9S8R16X4908HWS025JI
Application: Tp4056 Module Can Charge For Single-Cell Lithium Battery Or Multi-Section Parallelled Lithium Batteries, Can Be Powered By Usb Ports; The Module With Usb Port, Can Be Directly Input To Do With Rechargeable Lithium Battery As A Phone Charger.
Attention: The Charge Should Disconnect The Load Out Terminal On The Positive And Negative Can Not Be Wrong, Please According To Specifications, Otherwise It Will Damage Directly.
Reminder: Please Check All The Connections Before Charging, It Will Be Damaged If The Load Out On The Positive And Negative With Wrong Polarity. If You Do This The First Time, Please Watch The Video On Youtube Before Installation.
Note: When First Accessing The Battery, There May Be No Voltage Output Between Out+/Out-, At This Time Access To 5V Charging Can Activate The Protection Circuit, The Battery Is Disconnected From B+/B- And Then Connected Again Also Need To Be Charged To Activate The Protection Circuit. When Using A Mobile Phone Charger As Input, The Charger Should Be Able To Output 1A Or Above, Otherwise It May Not Charge Properly..
Usage: The +/- Pads Are The Power Inputs, Access To 5V. B+ Connects To The Positive Pole, B- Connects To The Negative Pole, Out+ And Out- Connects To The Loads, Such As Connecting To The Positive And Negative Pole Of The Mobile Booster Board Or Other Loads.
Features
- Upgrade Version: The input has a Type C female connector, which can be directly input as a mobile phone charger to recharge the lithium battery; The input voltage wiring pad is also reserved, which can be very convenient for DIY
- Usage: The +/- pads are the power inputs, access to 5V. B+ connects to the positive pole, B- connects to the negative pole, OUT+ and OUT- connects to the loads, such as connecting to the positive and negative pole of the mobile booster board or other loads
- Application: TP4056 module can charge for single-cell lithium battery or multi-section parallelled lithium batteries, can be powered by USB ports; The module with USB port, can be directly input to do with rechargeable lithium battery as a phone charger
- Note: When first accessing the battery, there may be no voltage output between OUT+/OUT-, at this time access to 5V charging can activate the protection circuit, the battery is disconnected from B+/B- and then connected again also need to be charged to activate the protection circuit. When using a mobile phone charger as input, the charger should be able to output 1A or above, otherwise it may not charge properly.
- Attention: The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly
- Reminder: Please check all the connections before charging, it will be damaged if the load OUT on the positive and negative with wrong polarity. If you do this the first time, please watch the video on Youtube before installation
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 2.00 x 2.70 x 0.90 inches
Warranty: No Warranty
See On Amazon #10
3S 4S 5.5A Capacitor Active Equalizer Balancer Lifepo4 Lithium Lipo Battery Energy Transfer Active Equalization Whole Group Balancer
Asin: B09MS8Z58H | Model: JWCABalancer-4S | PartNumber: JWCABalancer-4S | Ean: 0721927465870 | UPC: 721927465870
The Quiescent Current Is About 12Ma, And The Battery Capacity Is Recommended To Be Used Between 30-300Ah!.
Note: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Otherwise, It Will Short-Circuit And Burn The Board..
With Under-Voltage Sleep Protection, Only Detecting The Battery Voltage Of B1, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Is Lower Than 2.7V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.
Features
- Working Voltage: 2.7V-4.2V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4). It can Not fit LTO battery. If it is used for 3S, the last line B4+ is empty.
- Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB, balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
- The quiescent current is about 12mA, and the battery capacity is recommended to be used between 30-300AH!
- With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
- Note: Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board.
- See more on Amazon...
Brand: XFYBZN | Manufacturer: XFYBZN
Dimensions: 1.33 x 3.63 x 3.05 Inches | Weight: 0.13 pounds
Warranty: 60-day warranty
See On Amazon #11
UMLIFE 4pcs 18650 Charging Board Dual USB 5V 2.4A Mobile Power Bank Module 186 50 Lithium Battery Charger Board with Overcharge Overdischarge Short Circuit Protection DIY USB Power Bank Board
Asin: B097ZLJH8L | Ean: 0701715467187 | UPC: 701715467187
Overcharge Protection, Overdischarge Protection, Short Circuit Protection, Constant Current.Suggest Working Conditions:Max Continuous Charge/Discharge Current 1.5/2.4A,Working Temperature: -5～45℃..
Size: 6.5 * 2.5 * 0.1Cm;.
Charging Cable: Support Three Usb Data Cable Charging, Including For Iphone And Android..
Dual Output Current: 5V 2.4A；Constant Current: 2.4A;.
Features
- Attention : The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out
- Dual Output Current: 5V 2.4A Constant Current: 2.4A;
- overcharge protection, overdischarge protection, short circuit protection, constant current.Suggest Working Conditions:Max continuous charge/discharge current 1.5/2.4A,working temperature: -5 45 .
- Charging cable: support three USB data cable charging, including for Iphone and Android.
- Size: 6.5 * 2.5 * 0.1cm;
- See more on Amazon...
Brand: UMLIFE | Manufacturer: UMLIFE
Weight: 0.02 Pounds
See On Amazon #12
100Balance 5A Battery Active Equalizer Balancer 4S for Lifepo4 or NCM Li-ion Lithium Battery Group BMS Energy Transfer Board with Blue ABS Case(4S)
Asin: B0CHYQMJ1N | Ean: 0725414469853 | UPC: 725414469853
Equalized Energy Dissipation Without Internal Resistance And Low Heat Generation For Long Time Connection To The Battery Pack..
We Provide 1 Year Product Warranty And 24/7 Online Service For Your Inquiry, Please Feel Free To Contact Us..
It Can Be Used In The Field Of Power Batteries (Electric Vehicles, Forklifts, Agvs, Cleaning Vehicles, Etc.), And Can Also Be Used In The Field Of Energy Storage (Outdoor Power Supply, Rv, Home Energy Storage, Base Station, Photovoltaic, Etc.).
Suitable For 3-16S Li-Ion Battery Pack And Lifepo4 Battery Pack. Please Note The Battery Strings Must Be Matched To The Active Balancer Strings..
Features
- This is an active equalization module for lithium batteries, which can be compatible with all other brands of BMS.
- Suitable for 3-16S Li-ion battery pack and LiFepo4 battery pack. Please note the battery strings must be matched to the active balancer strings.
- Equalized energy dissipation without internal resistance and low heat generation for long time connection to the battery pack.
- It can be used in the field of power batteries (electric vehicles, forklifts, AGVs, cleaning vehicles, etc.), and can also be used in the field of energy storage (outdoor power supply, RV, home energy storage, base station, photovoltaic, etc.)
- We provide 1 year product warranty and 24/7 online service for your inquiry, please feel free to contact us.
- See more on Amazon...
Brand: 100 BALANCE | Manufacturer: Dongguan Balanced Management Technology Co., Ltd
Dimensions: 0.83 x 3.82 x 2.56 inches
See On Amazon #13
Comidox 3S 12V 10A 18650 Lithium Battery Protection Board BMS Li-ion Charger Protection Module Anti-Overcharge/Over-Discharge/Over-Current/Short Circuit 3Pcs
Asin: B07J9NXQ6W | Model: CP219 | PartNumber: CP219 | Ean: 0661083377344 | UPC: 661083377344
High Quality Mosfets Such As Vishay, Aos, Ir, Etc., Fr-4 Low Temperature Coefficient Sheet, Well Designed And Tested..
This Protection Board Can Not Be Used For Iron Ion Polymer Battery, Hand Drill Battery Pack, Electric Fish Battery Pack, Electric Bicycle Battery Pack, 2 Pieces And 24V Series, 775 (4A) Or Above Motor, 1W Fisheye Led Lamp..
It Is Small In Size And Suitable For Many Applications Requiring High Integration And Low Cost. It Can Meet Various Performance Requirements And Ensure The Absolute Safety And Reliability Of The Battery Pack..
With Overcharge, Over Discharge, Over Current, Short Circuit And Other Protection Functions, For A Variety Of Shapes Of Various Shapes 3.7V Lithium Battery..
Features
- The power range described is applicable to the following products: vacuum cleaner, massager battery pack, LED light backup power supply, 12V electronic products, solar street light battery pack, monitoring standby power supply, etc.
- With overcharge, over discharge, over current, short circuit and other protection functions, for a variety of shapes of various shapes 3.7V lithium battery.
- High quality MOSFETs such as VISHAY, AOS, IR, etc., FR-4 low temperature coefficient sheet, well designed and tested.
- It is small in size and suitable for many applications requiring high integration and low cost. It can meet various performance requirements and ensure the absolute safety and reliability of the battery pack.
- This protection board can not be used for iron ion polymer battery, hand drill battery pack, electric fish battery pack, electric bicycle battery pack, 2 pieces and 24V series, 775 (4A) or above motor, 1W fisheye LED lamp.
- See more on Amazon...
Brand: Comidox | Manufacturer: Comidox
See On Amazon #14
100Balance Hardware1A Active Balancer 4S Equalizer for Lifepo4 or Li-ion Lithium Battery Group BMS Energy Transfer Board with Blue ABS Case(4S)
Asin: B0CHMTY1T9 | Ean: 0725414469631 | UPC: 725414469631
Equalized Energy Dissipation Without Internal Resistance And Low Heat Generation For Long Time Connection To The Battery Pack..
We Provide 1 Year Product Warranty And 24/7 Online Service For Your Inquiry, Please Feel Free To Contact Us..
It Can Be Used In The Field Of Power Batteries (Electric Vehicles, Forklifts, Agvs, Cleaning Vehicles, Etc.), And Can Also Be Used In The Field Of Energy Storage (Outdoor Power Supply, Rv, Home Energy Storage, Base Station, Photovoltaic, Etc.).
Suitable For 3-16S Li-Ion Battery Pack And Lifepo4 Battery Pack. Please Note The Battery Strings Must Be Matched To The Active Balancer Strings..
Features
- This is an active equalization module for lithium batteries, which can be compatible with all other brands of BMS.
- Suitable for 3-16S Li-ion battery pack and LiFepo4 battery pack. Please note the battery strings must be matched to the active balancer strings.
- Equalized energy dissipation without internal resistance and low heat generation for long time connection to the battery pack.
- It can be used in the field of power batteries (electric vehicles, forklifts, AGVs, cleaning vehicles, etc.), and can also be used in the field of energy storage (outdoor power supply, RV, home energy storage, base station, photovoltaic, etc.)
- We provide 1 year product warranty and 24/7 online service for your inquiry, please feel free to contact us.
- See more on Amazon...
Brand: 100 BALANCE | Manufacturer: Dongguan Balanced Management Technology Co., Ltd
Dimensions: 0.71 x 2.36 x 1.38 inches
See On Amazon #15
Flylin 1Pcs Battery Protection Board, 4S 100A 12V BMS Battery Protection Board with w/Balance LiFePO4 Lithium Iron Phosphate Charging Controller LFP (4S 100A 12V)
Asin: B0BLVMGH6G
Balance Function: With Equilibrium Function To Keep Each Cell In Balance And Good Service Life.
High Performance: Stable Various Protective Functions For Charging And Discharging, Such As Overcharge Protection, Over-Discharge Protection And Short Circuit Protection.Choosing The Correct Protection Board And Applying It Appropriately Is Vital To The Longevity Your Batteries.
Easy To Use: Used For 4 Series 12V Lifepo4 Batteries, Comes With 5P-250Mm Wires.
Product Role: It Will Protect Battery Pack From Overcharging, Over-Discharging Over-Current And Short Circuit.
Features
- Safety: Protection circuit board is the heart of battery pack, must to have to avoid battery pack from explosion, fire and damage
- Product role: It will protect battery pack from overcharging, over-discharging over-current and short circuit
- Balance Function: With equilibrium function to keep each cell in balance and good service life
- Easy to Use: Used for 4 series 12V LiFePO4 batteries, comes with 5P-250mm wires
- High Performance: Stable various protective functions for charging and discharging, such as overcharge protection, over-discharge protection and short circuit protection.Choosing the correct protection board and applying it appropriately is vital to the longevity your batteries
- See more on Amazon...
Brand: Flylin | Manufacturer: Flylin
Weight: 0.09 Pounds
Warranty: No
See On Amazon #16
Active Equalizer Whole Group Balancer Lifepo4 Lipo Lithium Active Battery Energy Transfer Active Equalization Module for LFP LTO (6S)
Asin: B0BS1DC9GQ | Model: Hilitand26y4conpav-11 | PartNumber: Hilitand26y4conpav-11
【With Sleep Protection】 The Working Voltage Is 1.8V To 4.2V. When The Voltage Is Lower Than 3.0V, It Will Automatically Stop And Enter The Dormant State, And The Standby Power Consumption Is Less Than 0.1Ma..
【Capacitance Principle】 No External Power Supply Is Required,The Working Principle Is Capacitor Fit Transfers The Transporter, Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack.The Equalization Board Can Be Connected To The Battery To Start The Equalization Work..
【Notice】 Before Connecting The Equalization Board, Check Whether Each Piece Of Wiring Is Correct, Insulation Between The Bottom Board And The Battery Connection Terminals Is Required To Prevent Burnout..
【Original Design】 Using The Original Ultra-Low Internal Resistance Mos, Equalizing Current 0-5.5A, The More Balanced The Battery, The Lower The Current..
Features
- For LFP LTO Adopting ultra low internal resistance MOS and premium Printed Circuit Board to ensure efficient balance effect. This active equalizer can be applied in ternary lithium battery, lithium iron battery, and LTO battery. Applicable Serial Number 5/6s 6/7s 7/8s.
- Original Design Using the original ultra-low internal resistance MOS, equalizing current 0-5.5A, the more balanced the battery, the lower the current.
- With Sleep Protection The working voltage is 1.8V to 4.2V. When the voltage is lower than 3.0V, it will automatically stop and enter the dormant state, and the standby power consumption is less than 0.1mA.
- Notice Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout.
- Capacitance Principle No external power supply is required,The working principle is Capacitor fit transfers the transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack.the equalization board can be connected to the battery to start the equalization work.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon #17
CHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board with Protection Charger Module
Asin: B06XCXPY86 | Model: 4333092022 | PartNumber: 4333092022 | Ean: 6923074054820
Input Voltage: 5V.
Inputs With Micro Usb Female, Can Be Directly Input To Do With The Phone Charger Rechargeable Lithium Battery.
Connect The Battery To The B + B-, Inserted Into The Usb Female Mobile Phone Charger, The Red Light Is Being Charged, The Green Light To Full..
Maximum Charge Current: 1000Ma.
Features
- Charging cut-off voltage: 4.2V 1%
- Maximum charge current: 1000mA
- Input voltage: 5V
- Connect the battery to the B + B-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full.
- Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
Weight: 0.04 pounds
See On Amazon #18
Battery Active Balancer Board 4 Series 6A Capacitive Active Equalization Board Energy Transfer Board
Asin: B09Q2Q8R97
【High Accuracy】 Its Price Is Lower Than Similar Capacitor Products, And Its Unique Design Keeps Each Battery In Balance, Effectively Prolonging The Battery Life And Making It More Practical..
【Scope Of Application】 Battery Charging Board Is Common To All Ternary Lithium Batteries And Iron-Lithium Batteries. The Larger The Capacity Of The Battery Pack Used, The Longer The Balance Time Will Be..
【Strong Applicability】 Bms Pcb Board Adopts A Simple Indicating Switch Design, Which Is Easy To Operate And Can Be Easily Operated By People With Weak Foundations..
【Current】 The Quiescent Current Is As Low As 5Ma, Which Can Achieve A High-Precision Equalization Of ±5Mv, And The Equalization Current Is 2~6A (Limit Current)..
Features
- Active Capacitance Balance Battery balance charging board uses a specially customized control chip, does not detect pressure difference/designed to work for a long time without shutting down.
- Current The quiescent current is as low as 5mA, which can achieve a high-precision equalization of 5mV, and the equalization current is 2~6A (limit current).
- High Accuracy Its price is lower than similar capacitor products, and its unique design keeps each battery in balance, effectively prolonging the battery life and making it more practical.
- Strong Applicability Bms pcb board adopts a simple indicating switch design, which is easy to operate and can be easily operated by people with weak foundations.
- Scope of Application Battery charging board is common to all ternary lithium batteries and iron-lithium batteries. The larger the capacity of the battery pack used, the longer the balance time will be.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon #19
Mudder 20 Pieces Charging Module Battery Charging Board with Battery Protection BMS 5V Micro USB 1A 186 50 Charge Module
Asin: B087Q915LF | Model: Mudder-Battery Charging Board-01 | PartNumber: Mudder-Battery Charging Board-01
Function Introduction: Input Voltage Is 5V, Battery Over-Discharge Protection Voltage Is 2.5V, Battery Over Current Protection Current Is 3A; Connect The Battery To The B+ B-, Inserted Into The Usb Female Mobile Phone Charger, The Red Light Is Being Charged And The Green Light To Full.
Notice: Please Note That The Charge Should Disconnect The Load Out Terminal On The Positive And Negative Can Not Be Wrong, Please According To Specifications, Otherwise It Will Break Directly; The Ammeter For Testing Current Can Only Be Connected In Series With The 5V Input Terminal Of The Charging Board.
Suitable Occasion: The Battery Charging Board Is Applied For Single-Cell Lithium Battery Or Multi-Cell Parallel Lithium Battery Charging, And The Charging Port Can Be Powered From Usb, Which Are Convenient For You To Operate.
Details: The Charging Board Inputs With Micro Usb Female, Can Be Directly Inputed To Do With Phone Charger Rechargeable Battery, Still Retains The Input Voltage Wiring Pads, Convenient For You To Diy; Charging Cut-Off Voltage: 4.2V, Max Charge Current: 1000 Ma.
Features
- What you receive: there are 20 pieces charging modules in our package, practical tools for you, which can also meet your various needs, enough for you to change and replace
- Details: the charging board inputs with micro USB female, can be directly inputed to do with phone charger rechargeable battery, still retains the input voltage wiring pads, convenient for you to DIY; Charging cut-off voltage: 4.2V, max charge current: 1000 mA
- Function introduction: input voltage is 5V, battery over-discharge protection voltage is 2.5V, battery over current protection current is 3A; Connect the battery to the B+ B-, inserted into the USB female mobile phone charger, the red light is being charged and the green light to full
- Suitable occasion: the battery charging board is applied for single-cell lithium battery or multi-cell parallel lithium battery charging, and the charging port can be powered from USB, which are convenient for you to operate
- Notice: please note that the charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will break directly; The ammeter for testing current can only be connected in series with the 5V input terminal of the charging board
- See more on Amazon...
Brand: Mudder | Manufacturer: Mudder
Dimensions: 0.63 x 7.87 x 3.94 Inches
See On Amazon #20
Hilitand Battery Active Equalizer, Balancer Energy Transfer Board Accessory Lithium Lipo Battery Energy Active Equalizer Fit Capacitor Silicone Cable for LFP LTO(4S)
Asin: B09F3VH3QK
Practical Tool: No External Power Supply Is Required, And The Transfer Is Carried Out By Means Of The Internal Energy Transfer Of The Battery And The Balance Of The Entire Battery Pack..
Note: The Quiescent Current Is About 12 Ma, And It Is Recommended To Be Used For Batteries With A Battery Capacity Of 60‑300 Ah, Which Has Passed Strict Quality Control, You Can Use It With Confidence..
Great Performance: Using Ultra Low Internal Resistance Mos And Premium Printed Circuit Board, Ensuring Excellent Balance Effect. The Balance Accuracy Is 5Mv, The Sleep Current Is Less Than 0.1Ma, And The Efficiency Is Very High..
Product Brief: The Working Voltage Is 1.8V To 4.2V, And When It's Lower Than 3.0V, It Will Automatically Stop And Enter Dormant State. Suitable For Battery, Lfp Battery, Lto Battery..
Features
- Premium Quality: This battery active equalizer suite for ternary lithium battery, lithium iron battery, and LTO battery. The working environment temperature of this battery active equalizer is from -10 to 60 .
- Product Brief: The working voltage is 1.8V to 4.2V, and when it's lower than 3.0V, it will automatically stop and enter dormant state. Suitable for battery, LFP battery, LTO battery.
- Practical Tool: No external power supply is required, and the transfer is carried out by means of the internal energy transfer of the battery and the balance of the entire battery pack.
- Great Performance: Using ultra low internal resistance MOS and premium Printed Circuit Board, ensuring excellent balance effect. The balance accuracy is 5MV, the sleep current is less than 0.1mA, and the efficiency is very high.
- Note: The quiescent current is about 12 mA, and it is recommended to be used for batteries with a battery capacity of 60 300 AH, which has passed strict quality control, you can use it with confidence.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon
Looking For Something Else?
Search