UMLIFE 4pcs 18650 Charging Board Dual USB 5V 2.4A Mobile Power Bank Module 186 50 Lithium Battery Charger Board with Overcharge Overdischarge Short Circuit Protection DIY USB Power Bank Board
Asin: B097ZLJH8L | Ean: 0701715467187 | UPC: 701715467187
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Overcharge Protection, Overdischarge Protection, Short Circuit Protection, Constant Current.Suggest Working Conditions:Max Continuous Charge/Discharge Current 1.5/2.4A,Working Temperature: -5～45℃..
Size: 6.5 * 2.5 * 0.1Cm;.
Charging Cable: Support Three Usb Data Cable Charging, Including For Iphone And Android..
Dual Output Current: 5V 2.4A；Constant Current: 2.4A;.
Features
- Attention : The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out
- Dual Output Current: 5V 2.4A Constant Current: 2.4A;
- overcharge protection, overdischarge protection, short circuit protection, constant current.Suggest Working Conditions:Max continuous charge/discharge current 1.5/2.4A,working temperature: -5 45 .
- Charging cable: support three USB data cable charging, including for Iphone and Android.
- Size: 6.5 * 2.5 * 0.1cm;
- See more on Amazon...
Brand: UMLIFE | Manufacturer: UMLIFE
Weight: 0.02 pounds
See On Amazon Similar To UMLIFE 4pcs 18650 Charging Board
#1
ALAMSCN TP4056 Type-C USB 5V 1A 18650 Lithium Battery Charger Module Li-ion Charging Board TC4056A with Dual Protection Functions(Pack of 12)
Asin: B08F7QSLN7 | Model: ALAMSCN | PartNumber: ALAMSCN | Ean: 0701715441620 | UPC: 701715441620
Two-In-One Charging And Discharging Protection Function..
Note: When The Battery Is Connected For The First Time, The Protection Circuit Can Be Activated By Charging It With 5V Voltage..
No Load The Light Not Bright, Red Light For Recharging, Is Full Of Green Light..
There Are Solder Joints For Input Voltage Wiring, Which Is Convenient For Diy..
Features
- The input terminal has a Type-c USB female socket, which can be directly used as an input to charge the lithium battery with a mobile phone charger.
- There are solder joints for input voltage wiring, which is convenient for DIY.
- Two-in-one charging and discharging protection function.
- No load the light not bright, red light for recharging, is full of green light.
- Note: When the battery is connected for the first time, the protection circuit can be activated by charging it with 5V voltage.
- See more on Amazon...
Brand: ALAMSCN | Manufacturer: ALAMSCN
Weight: 0.04 Pounds
Warranty: 3 months
See On Amazon #2
AITRIP 20pcs TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions (20pcs TP4056 Type-c USB)
Asin: B0C2VD3ZW3 | Ean: 0687117710338 | UPC: 687117710338
Battery Overcharge Lifting Voltage: 4.00 V.
Charging Cut-Off Voltage: 4.2V ± 1%.
Battery: Over-Current Protection Current 3 A.
Maximum Charging Current Output: 1000Ma.
Features
- Input interface: Type-c USB
- Maximum charging current output: 1000mA
- Battery overcharge lifting voltage: 4.00 V
- Battery: over-current protection current 3 A
- Charging cut-off voltage: 4.2V 1%
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #3
6pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board Module
Asin: B07PZT3ZW2 | Model: . | PartNumber: . | Ean: 0673400168474 | UPC: 673400168474
★ In Discharge Mode (The Charging Mode Key Function Is Invalid), Trigger The Key Port Once To Open The Output; Continuously Trigger The Key Port Twice To Close The Output.
★ Allow Discharge While Charging. (Note: At This Time Output Voltage 4.7 / 5V).
★ The First Time The Load Is Connected, The Output Is Automatically Turned On. If The Load Is Less Than 50Ma, The Output Will Be Automatically Turned Off After 30 Seconds; If The Load Is Greater Than 50Ma, The Output Will Be Automatically Turned On.
★ 4 In 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium Battery Protection Function: Over-Current, Overvoltage, Over-Temperature, Short Circuit Protection.
Features
- MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground)
- 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection
- In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output
- The first time the load is connected, the output is automatically turned on. If the load is less than 50mA, the output will be automatically turned off after 30 seconds; if the load is greater than 50mA, the output will be automatically turned on
- Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V)
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.39 x 0.98 x 0.63 Inches
See On Amazon #4
Battery Charger Module USB TP4056 3.7V 4.2V to 9V 5V 2A Charge Discharge Integrated Step Up Module,18650 Lithium Li-ion Battery Charger Module(6 PCS)
Asin: B098989NRZ | Ean: 8414825638416
Instructions For Use: Tp4056 Charger Module Can Be Used For Multimeter To Convert To Charge Lithium Batteries. Vin+ Port Input 5V Solar Panel, Bat+ Port Can Output 4.2V To Charger 3.7V 18650 Battery..
Package Contains: 6 * Lithium Li-Ion Battery Charger Module.
Small And Delicate: 1.3In*0.92In/33Mm*23Mm.
Features: Battery Charger Module Combines The Tp4056 Battery Charger With A Boost Circuit. Adds A Battery And Converts A Low Power Dc Device To A Usb Rechargeable Device..
Features
- Material: Battery charger module made of electronic components.Can be used for multimeter, converted to lithium battery charging.
- Features: Battery charger module combines the TP4056 battery charger with a boost circuit. Adds a battery and converts a low power DC device to a USB rechargeable device.
- Instructions for use: TP4056 Charger Module can be used for multimeter to convert to charge lithium batteries. VIN+ port input 5V solar panel, BAT+ port can output 4.2V to charger 3.7V 18650 battery.
- Small and delicate: 1.3in*0.92in/33mm*23mm
- Package contains: 6 * Lithium Li-ion Battery Charger Module
- See more on Amazon...
Brand: ABSOK | Manufacturer: LESEXS
Weight: 0.04 Pounds
See On Amazon #5
ACEIRMC 12pcs 1S 3.7V 4A 18650 Charger PCB BMS Protection Board for Li-ion Lithium Battery Cell
Asin: B09B1VY1BY | Ean: 0701715479210 | UPC: 701715479210
Low Standby Current: Mos Transistor Can Control The Battery Charge And Discharge, Low Standby Current Consumption..
Attention: Strictly According To The Diagram Wiring: B+: Connected Battery Positive, B-: Connect To Battery Negative, P+: Connection Charge / Discharge Positive, P- Connection Charge / Discharge Negative, Otherwise It Will Cause Damage To The Chip. After Connection,It Need To First Charge Activation, Then Will Have The Output..
Widely Applications: Use For Variety Of Capacities And Various Shapes 3.7V Lithium Batteries,Massager Battery Pack, Led Light Backup Power Supply, Solar Street Light Battery Pack, Monitor Standby Power Supply, Etc..
Multiple Protection: Over-Discharge Protection, Overcurrent Protection, Overcharge Protection, Short Circuit Protection; A Combination Of 4 Safety Features That Work Together To Provide Ultimate Protection.
Features
- HIGH-ACCURACY, HIGHLY DURABLE: High-accuracy voltage detection circuit, fine workmanship and durable, Effective life greater than 50000 hours.
- MULTIPLE PROTECTION: Over-discharge protection, overcurrent protection, overcharge protection, short circuit protection; A combination of 4 safety features that work together to provide ultimate protection
- LOW STANDBY CURRENT: MOS transistor can control the battery charge and discharge, low standby current consumption.
- WIDELY APPLICATIONS: Use for variety of capacities and various shapes 3.7V lithium batteries,Massager battery pack, LED light backup power supply, solar street light battery pack, monitor standby power supply, etc.
- ATTENTION: Strictly according to the diagram wiring: B+: connected battery positive, B-: connect to battery negative, P+: connection charge / discharge positive, P- connection charge / discharge negative, Otherwise it will cause damage to the chip. After connection,it need to first charge activation, then will have the output.
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: ACEIRMC
See On Amazon #6
AITIAO 15pcs Type-C USB 3.7V 4.2V 1A Lithium Battery Charger Module Fast Charging Board with Protection
Asin: B0BVR4FXY1 | Ean: 0701715566781 | UPC: 701715566781
With Protection Board, Over-Voltage Protection, Over-Discharge Protection, And Over-Current Protection. Over-Discharge Protection Value 2.4V, Over-Current Protection Value: 4A..
Package&Warranty: 15Pcs Type-C Usb 3.7V 4.2V 1A Lithium Battery Charging Protection Board. If You Have Any Question About The Product Please Contact Us..
Tip: The First Time You Use It, You Need To Connect The Power Supply To Activate The Charging Protection Board! If You Are The First Time To Do This Job, We Suggest You Can Watch Related Video On The Internet Before Installation..
Suitable For All Types Of 3.7V Lithium Batteries,Small Appliances Modification And Tablet Pc Retrofit Charging Port. Suitable For Single Lithium Battery (Parallel Connection Is Not Limited, Can Not Be Connected In Series)..
Features
- Input Voltage: 5V; current: 1A; Charging cut-off voltage: 4.2V/4.35V optional; Input interface: Type-C USB
- Suitable for all types of 3.7V lithium batteries,small appliances modification and tablet PC retrofit charging port. Suitable for single lithium battery (parallel connection is not limited, can not be connected in series).
- With protection board, over-voltage protection, over-discharge protection, and over-current protection. Over-discharge protection value 2.4V, over-current protection value: 4A.
- Tip: The first time you use it, you need to connect the power supply to activate the Charging protection board! If you are the first time to do this job, we suggest you can watch related video on the Internet before installation.
- Package&warranty: 15pcs Type-C USB 3.7V 4.2V 1A lithium battery charging Protection board. If you have any question about the product please contact us.
- See more on Amazon...
Brand: AITIAO | Manufacturer: AITIAO
See On Amazon #7
AITRIP 6PCS 2A USB 18650 Lithium Li-ion Battery Charger Module Boost 3.7V to 5V 9V 12V Adjustable DC-DC Step Up Boost Module TP4056 DIY Kit Parts
Asin: B08GWTBD3T | Model: EC19 | PartNumber: EC19 | Ean: 0701715443501 | UPC: 701715443501
Input Voltage: 4.5-8V Dc.
Charging Voltage: 4.2V Dc ；Charging Current: Max. 1A.
Output Voltage: 4.3-27V Dc (Continuously Adjustable).
Discharging Current: Max. 2A.
Features
- Can be used for multimeter, converted to lithium battery charging
- Discharging current: Max. 2A
- Input voltage: 4.5-8V DC
- Output voltage: 4.3-27V DC (Continuously adjustable)
- Charging voltage: 4.2V DC Charging current: Max. 1A
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
Weight: 0.07 Pounds
See On Amazon #8
CHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board with Protection Charger Module
Asin: B06XCXPY86 | Model: 4333092022 | PartNumber: 4333092022 | Ean: 6923074054820
Input Voltage: 5V.
Inputs With Micro Usb Female, Can Be Directly Input To Do With The Phone Charger Rechargeable Lithium Battery.
Connect The Battery To The B + B-, Inserted Into The Usb Female Mobile Phone Charger, The Red Light Is Being Charged, The Green Light To Full..
Maximum Charge Current: 1000Ma.
Features
- Charging cut-off voltage: 4.2V 1%
- Maximum charge current: 1000mA
- Input voltage: 5V
- Connect the battery to the B + B-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full.
- Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
Weight: 0.04 Pounds
See On Amazon #9
8PCS 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Supply Charge and Discharge Protection Converter Protection PCB Board Module
Asin: B0836J8LR4 | Model: UMLIFE-001 | PartNumber: UMLIFE-001 | Ean: 0701715435162 | UPC: 701715435162
❃❃ The Output Opens Automatically At The First Time The Load Is Connected.If The Load Is Less Than 50Ma, Automatically Close The Output After 30 Seconds;If The Load Is Greater Than 50Ma, The Output Opens Automatically..
❃❃ Can Be Applied To Solar Panel Turning To Mobile Phone Charging, Car Charging Retrofit, Driving Recorder Power Supply, Household Power Supply, Intelligent Plugging Transformation, Fast Charging Adapter, Etc..
❃❃ High Power High Efficiency: Discharge Efficiency Up To 96%. In Discharge Mode (The Charging Mode Key Function Is Invalid), Trigger The Key Port Once To Open The Output; Continuously Trigger The Key Port Twice To Close The Output..
❃❃ 4 In 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium Battery Protection Function: Over-Current, Overvoltage, Over-Temperature, Short Circuit Protection..
Features
- MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground).
- 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection.
- The output opens automatically at the first time the load is connected.If the load is less than 50MA, automatically close the output after 30 seconds;If the load is greater than 50MA, the output opens automatically.
- High Power High Efficiency: Discharge efficiency up to 96%. In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output.
- Can be applied to solar panel turning to mobile phone charging, car charging retrofit, driving recorder power supply, household power supply, intelligent plugging transformation, fast charging adapter, etc.
- See more on Amazon...
Brand: UMLIFE | Manufacturer: UMLIFE
Weight: 0.04 pounds
See On Amazon #10
Teyleten Robot 18650 Lithium Li-ion 3.7V 4.2V Battery Charger Board DC-DC Step Up Boost Module TP4056 DIY Kit Parts Type-C 10pcs
Asin: B0BJYRGZR4 | Ean: 9331632162301
Startable To Limit Inrush Current, With Battery Reverse Connection Protection, Low Power Standby, Extend Battery Life.
Input Voltage Range 4.2V~6.5V, Output Voltage 4.2V-28V Adjustable, Maximum Power 5W.
Charging Status Dual Output, No Battery And Fault Status Display, 0V Activation, 2.9V Trickle Charge, Working Temperature -40~80℃.
Constant Current/Constant Voltage Charging With Over-Temperature Protection.
Features
- Max 1A programmable linear charging current for single 3.7V Li-ion battery, full 4.2V
- Constant current/constant voltage charging with over-temperature protection
- Startable to limit inrush current, with battery reverse connection protection, low power standby, extend battery life
- Charging status dual output, no battery and fault status display, 0V activation, 2.9V trickle charge, working temperature -40~80
- Input voltage range 4.2V~6.5V, output voltage 4.2V-28V adjustable, maximum power 5W
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.00 x 0.00 x 0.00 Inches
See On Amazon #11
KOOBOOK 5Pcs 18650 Li-ion Lithium PCB Protection Circuit Board 3.7V Battery Cell Protection Board 5A Round
Asin: B07XMKCWQ6 | Model: KB611 | PartNumber: KB611 | Ean: 0797806000593 | UPC: 797806000593
Overcharge Protection, Over Discharge Protection, Over Current Protection, Short Circuit Protection..
Package Includes:Pcb Protection Board With 1 Plastic Base And 1 Heat Shrinkable Tube..
Pcb Board Diameter: Approx 1.6Cm/0.63".
Maximum Output Current: 5A.
Features
- Apply to Lithium-ion battery,Lithium-polymer battery.
- Maximum output current: 5A
- Overcharge protection, over discharge protection, over current protection, short circuit protection.
- PCB Board Diameter: approx 1.6cm/0.63
- Package Includes:PCB Protection Board with 1 Plastic Base and 1 Heat Shrinkable Tube.
- See more on Amazon...
Brand: KOOBOOK | Manufacturer: KOOBOOK
See On Amazon #12
15Pcs 5V 1A TP4056 Charging Module Micro USB 18650 Lithium Battery Charger Board with Protection
Asin: B08MT6567Z | Model: 19061 | PartNumber: 19061 | Ean: 0701715451995 | UPC: 701715451995
Application:It Can Charge For Single-Cell Lith Ium Battery Or Multi-Section Parallelled Lithium Batteries, Can Be Powered By Usb Ports; The Module With Usb Port, Can Be Directly Input To Do With Rechargeable Lithium Battery As A Phone Charger, And Still Retains Voltage Input Wiring Pads, Which Is Convenient For Diy..
Package Includes:15 *Tp4056 Micro Usb Charging Module.
Note:Please Check All Connections Before Charging, It Will Be Damaged If The Load Out Terminal On The Positive And Negative With Wrong Polarity. There Is Not Included Installation Instruction.If You Are The First Time To Do This Job, We Suggest You Can Watch Related Video On Youtube Before Installation..
Power Indicator: Red Is Charging, Green Is Fully Charged..
Features
- Input Voltage: 5V; Max output current: 1A; Charging cut-off voltage: 4.2V 1%; Input interface: Micro USB
- Power Indicator: Red is charging, Green is fully charged.
- Application:It can charge for single-cell lith ium battery or multi-section parallelled lithium batteries, can be powered by USB ports; The module with usb port, can be directly input to do with rechargeable lithium battery as a phone charger, and still retains voltage input wiring pads, which is convenient for DIY.
- Note:Please check all connections before charging, it will be damaged if the load OUT terminal on the positive and negative with wrong polarity. There is not included Installation instruction.If you are the first time to do this job, we suggest you can watch related video on Youtube before installation.
- Package includes:15 *TP4056 Micro USB Charging Module
- See more on Amazon...
Brand: Atnsinc | Manufacturer: Atnsinc
Weight: 0.04 pounds
See On Amazon #13
AOICRIE Dual USB 18650 Battery Charger Protection Module 4pcs, Power Bank PCB Module Board, Dual USB 5V 1A 2.1A
Asin: B08S3GQF3B | Ean: 0701715447554 | UPC: 701715447554
Led Indicator And Lcd Display: When Charging, The Display Will Show In Letters; After The Load Is Connected, Long Press The Led Light Button To Start The Output, And The Display Will Show Out Letters And The Relative Output Voltage And Current 5V1a Or 5V2.1A..
Note: The Positive Pole Of The Battery Is Connected To B+ And The Negative Pole Is Connected To B-, Do Not Reverse It. If It Is Reversed, It Will Burn Out!!!!.
The Protection Circuit Of The Boosted Lithium Battery Has Been Integrated, Prevent Over-Discharge, Over-Charge, Overload Short Circuit Protection, Over Current Protection, And Over Temperature Protection..
The Word "In" Will Be Shown In The Display; Output Indication: Long Press The Led Button After Turning On The Load, Start Output, The Word "Out" And The Current And Voltage Of 5.0V1.0A Or 5.0V2.1A Will Be Displayed In The Display..
Features
- It is possible to connect only one lithium battery or multiple lithium batteries in parallel. The capacity of connected battery is no more than 200,000 mA, As long as the battery with a voltage of 3.0-4.2V can be used.
- The word IN will be shown in the display; Output indication: Long press the LED button after turning on the load, Start output, The word OUT and the current and voltage of 5.0V1.0A or 5.0V2.1A will be displayed in the display.
- LED indicator and LCD display: When charging, the display will show IN letters; after the load is connected, long press the LED light button to start the output, and the display will show OUT letters and the relative output voltage and current 5V1A or 5V2.1A.
- The protection circuit of the boosted lithium battery has been integrated, prevent over-discharge, over-charge, overload short circuit protection, over current protection, and over temperature protection.
- Note: The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out!!!!
- See more on Amazon...
Brand: AOICRIE | Manufacturer: Aoicrie
See On Amazon #14
DORHEA 15Pcs Type-c 5V Charge Discharge Module 3.7V 4.2V 18650 Li-ion Battery Charge Boost Power Protection Board
Asin: B0CLLTKGMC | Ean: 0687117723789 | UPC: 687117723789
Automatically Switch The Input And Output, Charge The Battery When External Voltage Is Input, Or Else Discharge, Charging Green Light Flashing, Full Green Light Long Light, Discharge No Load Standby Light Does Not Light, When Discharging With Load, The Blue Light Is On. Standby Power Consumption Is About 0.8Ma..
Applicable To All Types Of 3.7V Lithium Batteries, Including 18650 And Collection Of Batteries..
With Overcharge And Overdischarge Protection, Overdischarge Protection 2.9V, Charging Cut-Off Voltage 4.2V, Automatically Switch To Output Mode When There Is No External Input Voltage..
Output 5V, Output Support 450Ma Or So, If The Output 1A, The Voltage Will Be According To The Electricity. If The Output Is 1A, The Voltage Will Be Around 4.9V-4.5V According To The Power Level..
Features
- 4.5-5.5V power supply, applicable to single lithium battery (parallel connection is not limited) limit 1.2A, the current can be stabilised at 1A when used as required.
- Output 5V, output support 450MA or so, if the output 1A, the voltage will be according to the electricity. If the output is 1A, the voltage will be around 4.9V-4.5V according to the power level.
- Automatically switch the input and output, charge the battery when external voltage is input, or else discharge, charging green light flashing, full green light long light, discharge no load standby light does not light, when discharging with load, the blue light is on. Standby power consumption is about 0.8MA.
- With overcharge and overdischarge protection, overdischarge protection 2.9V, charging cut-off voltage 4.2V, automatically switch to output mode when there is no external input voltage.
- Applicable to all types of 3.7V lithium batteries, including 18650 and collection of batteries.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #15
AEDIKO 10pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board
Asin: B09JZFXD1X | Ean: 0701715485921 | UPC: 701715485921
Protection Functions: 4 In 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module.Lithium Battery Protection Function:Over-Current Protection,Over-Voltage Protection, Over-Temperature Protection, Short Circuit Protection.
Application:2A 5V Module Widely Used For Mobile Power, Car Charging Retrofit,Driving Recorder Power Supply And Portable Devices Such As Mobile Phones And Tablets.
Note:The First Time The Load Is Connected, Output Is Automatically Turned On. If The Load Is Less Than 50Ma, The Output Will Be Automatically Turned Off After 30S; If The Load Is Greater Than 50Ma, The Output Will Be Automatically Turned On.
Mcu Users: If You Accept A Small Load Key Can Be Connected To The Microcontroller About 20S To Provide A Low Level Allows The Module To Continue Working. Trigger Mode: Low Level Trigger (Ground).
Features
- 2A 5V Lithium Battery Charging Protection Module:Output Voltage: 5V; Charging Current: 0-2.1A;Charging Voltage: DC 4.5V-5.5V (DC 5V Recommended)
- MCU Users: if You Accept a Small Load KEY Can be Connected to the Microcontroller about 20s to Provide a Low Level Allows the Module to Continue Working. Trigger Mode: Low Level Trigger (Ground)
- Protection Functions: 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module.Lithium Battery Protection Function:Over-Current Protection,Over-Voltage Protection, Over-Temperature Protection, Short Circuit Protection
- NOTE:The First Time the Load is Connected, Output is Automatically Turned On. If the Load is Less than 50MA, the Output will be Automatically Turned Off after 30s; if the Load is Greater than 50MA, the Output Will be Automatically Turned On
- Application:2A 5V Module Widely Used for Mobile Power, Car Charging Retrofit,Driving Recorder Power Supply and Portable Devices Such As Mobile Phones and Tablets
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
See On Amazon #16
DAOKI 5 Pcs 4.3V-27V Charging Discharge Module Adjustable Step Up Module+18650 Battery Holder with Red and Black Lines for 18650 Lithium Battery Fast Charging Boost Mobile Power Protection PCB Board
Asin: B091YL52YW | Model: JK-US-031 | PartNumber: JK-US-031
【Product Construction】：This Product Can Build A 9V Or 12V Rechargeable Power Supply, With A Micro Usb As A Dc 5V Input Interface..
【Overcharge Protection】：When The Input Current Reaches The Limit Flow Rate Of A Certain Module, The Module Will Automatically Turn On The Overcharge Protection Function To Prevent Damage Caused By Overcharge.
【Multimeter】：Can Be Used For Multimeter, Converted To Lithium Battery Charging. Vin+ Port Input 5V Solar Panels, Bat+ Port Can Output 4.2V To Charger 3.7V 18650 Battery..
【Various Indices】：Input Voltage: 4.5-8V; Charging Voltage: 4.2V(Charge The 3.7V 18650 Lithium Battery); Charging Current: Up To 1A; Discharge Current: The Maximum 2A..
Features
- Product use This module is made for charging rechargeable lithium batteries and Boost module. This module greatly simplifies the process of adding single cell Lithium battery power to your projects.
- Various indices Input voltage: 4.5-8V; Charging voltage: 4.2V(Charge the 3.7V 18650 Lithium Battery); Charging current: up to 1A; Discharge current: the maximum 2A.
- Product construction This product can build a 9v or 12v rechargeable power supply, with a micro usb as a DC 5v input interface.
- Multimeter Can be used for multimeter, converted to lithium battery charging. VIN+ Port input 5V solar panels, BAT+ port can output 4.2V to charger 3.7V 18650 battery.
- Overcharge protection When the input current reaches the limit flow rate of a certain module, the module will automatically turn on the overcharge protection function to prevent damage caused by overcharge
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
Weight: 0.22 pounds
See On Amazon #17
D-FLIFE 4pcs 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with Balance for Drill Motor 14.8V 16.8V Lipo Cell Module
Asin: B0C4T5HNPT | Ean: 0701715473812 | UPC: 701715473812
Low Standby Current: Mos Transistor Can Control The Battery Charge And Discharge, Low Standby Current Consumption..
4S 40A 16.8V Li-Ion Lithium Battery Protection Board Pcb Bms Charger Protection Circuit Balance Charging Module For Drill Motor Motorcycle Battery.
Applications:It Is Suitable For Lithium Batteries With Nominal Voltage Of 3.7V And Full Voltage Of 4.2V (Including 18650, 26650, Polymer Lithium Batteries, No Size Limit).Besides, It Can Use For Electric Drill With Starting Current Below 80A And Power Below 135W ..
Multiple Protections: Over-Discharge Protection, Overcurrent Protection, Overcharge Protection; High Charge And Discharge Current.
Features
- High Quality; Compact size and lightweight;High-accuracy voltage detection circuit; fine workmanship and durable; stable performance.
- Multiple Protections: Over-discharge protection, overcurrent protection, overcharge protection; High charge and discharge current
- LOW STANDBY CURRENT: MOS transistor can control the battery charge and discharge, low standby current consumption.
- Applications:It is suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, no size limit).Besides, it can use for electric drill with starting current below 80A and power below 135W .
- 4S 40A 16.8V Li-ion Lithium Battery Protection Board PCB BMS Charger Protection Circuit Balance Charging Module for Drill Motor Motorcycle Battery
- See more on Amazon...
Brand: D-FLIFE | Manufacturer: D-FLIFE
See On Amazon #18
Discharge Integrated Charging Protection Module :6pcs 2A 5V Module 3.7V 4.2V for 186 50 Lithium Battery Charging Boost Mobile Power Protection PCB Board
Asin: B0BGJJ4YXR
Discharge Mode: (The Charging Mode Key Function Is Invalid), Trigger The Key Port Once To Open The Output; Continuously Trigger The Key Port Twice To Close The Output.
Note: Allow Discharge While Charging. (Note: At This Time Output Voltage 4.7 / 5V).
Ioad Connection : The First Time The Load Is Connected, The Output Is Automatically Turned On. If The Load Is Less Than 50Ma, The Output Will Be Automatically Turned Off After 30 Seconds; If The Load Is Greater Than 50Ma, The Output Will Be Automatically Turned On.
Protective Function : 4 In 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium Battery Protection Function: Over-Current, Overvoltage, Over-Temperature, Short Circuit Protection.
Features
- Charging voltage: DC 4.5V-5.5V (DC 5V recommended) Charging current: 0-2.1A Charging quiescent current: 100uA Full voltage: 4.2V+ -1% Discharge current: 0-2.4A Discharge quiescent current: 50uA Discharge efficiency: up to 96% Output voltage: 5V Output current: 0-2.4A Ambient temperature: -20 to + 85 PCB board process: Shen Jin Size : 25 * 16 * 4mm
- Protective function : 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection
- Discharge mode: (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output
- Ioad Connection : The first time the load is connected, the output is automatically turned on. If the load is less than 50MA, the output will be automatically turned off after 30 seconds; if the load is greater than 50MA, the output will be automatically turned on
- Note: Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V)
- See more on Amazon...
Brand: TAHULU | Manufacturer: TAHULU
Dimensions: 0.20 x 0.98 x 0.59 Inches
See On Amazon #19
HiLetgo 5pcs TP4057 1A 3.7V Lithium Battery Charging and Discharging Board with Protection Type-C USB C Li-ion Battery Charging Board Over TP4056
Asin: B0CDWXM6K9 | Model: 3-01-1768 | PartNumber: 3-01-1768
Type-C Usb C Li-Ion Battery Charging Board.
Dual Output Of Charging Status, No Battery And Fault Status Display.
Constant Current/Constant Voltage Charging With Over-Temperature Protection.
Tp4057 Charging & Discharging In One Board.
Features
- TP4057 1A 3.7V Lithium Battery Charging & Discharging Board
- TP4057 Charging & Discharging in One Board
- Type-C USB C Li-ion Battery Charging Board
- Constant current/constant voltage charging with over-temperature protection
- Dual output of charging status, no battery and fault status display
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon
Looking For Something Else?
Search