Frontpage > Product > Michigan Motorsports 4.8L 5.3L Ls Performance Piston Ring Set - Steel Nitrided Top Ring, Napier 2Nd ...

Michigan Motorsports 4.8L 5.3L LS Performance Piston Ring Set - Steel Nitrided Top Ring, Napier 2nd Ring fits 1999-2013 LC9 L33 LH6 LM7 L20 LR4 L59 LM4 LS4 LY2 LMG LMF

Asin: B0CQ9FVZT3   |   Model: MM-3.780SNRings   |   PartNumber: MM-3.780SNRings


As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.

A Phosphate Coated Napier 2Nd Ring Design Provides Excellent Oil Control Compared To Standard Taper Faced Rings. Standard Tension Oil Control Rings Are Also Nitrided For Long Life And Scuff Resistance. These Rings Are Also A Great Choice For Highly Stressed Naturally Aspirated Engines And Will Typically Not Require Filing For Na Setups. For Power Adder Applications Instructions Are Provided For Proper End Gap Sizing..
Applications Include (4.8L And 5.3L Models Only): Avalanche 2002-2013 Colorado 2009-2012 Express 2003-2014 Impala 2006-2009 Monte Carlo 2006-2007 Silverado 1999-2013 Ssr 2003-2004 Suburban 2000-2014 Tahoe 2000-2014 Trailblazer 2006-2008 Gmc Canyon 2009-2012 Gmc Envoy 2005-2009 Gmc Savana 1500 2003-2014 Gmc Sierra 1999-2013 Gmc Yukon 2000-2014 Hummer H3 2008-2010 Saab 9-7X 2006-2009.
Designed To Fit Oem Gm Pistons. May Fit Some Aftermarket Pistons As Well (Must Verify Fitment). Bore Diameter: 3.780" (Stock 4.8L And 5.3L Ls Bore Size) Top Ring: 1.5Mm Thick Steel Nitride 2Nd Ring: 1.5Mm Thick Phosphate Iron Napier Oil Rings: 3.0Mm Steel Nitride Rails With Standard Tension Expander.
This High Performance Ring Set From Michigan Motorsports Is Ideal For Turbocharged, Supercharged And Nitrous Assisted Stock Shortblock Engines. The Gas-Nitrided Steel Top Ring Offers Higher Durability And Temperature Resistance Compared To Standard Moly-Faced Iron Rings, While Still Providing Great Longevity And Low Bore Wear..

Features

  • Michigan Motorsports 4.8L 5.3L LS Performance Ring Set - Standard Size. Fits 1999-2013 LS-Based 4.8L and 5.3L Engines with Stock Cylinder Bore and Pistons. Fits LM7 LR4 L59 LM4 L33 LS4 LY2 L20 LY5 LMG LMF LH6 LC9 LH8 LH9 File-fit set with Nitrided Steel Top Ring, Napier 2nd Ring, Standard Tension Oil Ring
  • This high performance ring set from Michigan Motorsports is ideal for Turbocharged, Supercharged and Nitrous assisted stock shortblock engines. The gas-nitrided Steel top ring offers higher durability and temperature resistance compared to standard moly-faced iron rings, while still providing great longevity and low bore wear.
  • A phosphate coated Napier 2nd ring design provides excellent oil control compared to standard taper faced rings. Standard tension oil control rings are also nitrided for long life and scuff resistance. These rings are also a great choice for highly stressed naturally aspirated engines and will typically not require filing for NA setups. For power adder applications instructions are provided for proper end gap sizing.
  • Designed to fit OEM GM pistons. May fit some aftermarket pistons as well (must verify fitment). Bore diameter: 3.780 (Stock 4.8L and 5.3L LS bore size) Top Ring: 1.5mm thick Steel Nitride 2nd Ring: 1.5mm thick Phosphate Iron Napier Oil Rings: 3.0mm Steel Nitride rails with standard tension expander
  • Applications Include (4.8L and 5.3L Models only): AVALANCHE 2002-2013 COLORADO 2009-2012 EXPRESS 2003-2014 IMPALA 2006-2009 MONTE CARLO 2006-2007 SILVERADO 1999-2013 SSR 2003-2004 SUBURBAN 2000-2014 TAHOE 2000-2014 TRAILBLAZER 2006-2008 GMC CANYON 2009-2012 GMC ENVOY 2005-2009 GMC SAVANA 1500 2003-2014 GMC SIERRA 1999-2013 GMC YUKON 2000-2014 HUMMER H3 2008-2010 SAAB 9-7X 2006-2009
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Michigan Motorsports

Warranty: 30 Days after purchase date

Amazon Price: $109.99 | as of 05/17/2024 (7:21pm pst) *DETAILS
Availability: In Stock

See On Amazon




Similar To Michigan Motorsports 4.8L 5.3L LS

  #1

Brian Tooley BTR Delphi LS7 Lifters + Trays for Gen 3 Gen 4 LS + Gen 5 LT Engines X12499225-16

Asin: B0C5Y39CJH   |   Model: X12499225-16   |   PartNumber: X12499225-16

Fits: 4.8L, 5.3L, 5.7L, 6.0L, 6.2L Gen 3 And Gen 4 Ls Engines & Gen 5 Lt Engines.
Non-Dod Only.
Fits: Ls1, Ls2, Ls3, Ls6, Ls7, Lm7, Lq4, Lq9, L83, L86, Lt1.

Features

  • Brian Tooley Racing (BTR) Delphi LS7 Lifters (set of 16) and Guide Trays (set of 4)
  • Fits: LS1, LS2, LS3, LS6, LS7, LM7, LQ4, LQ9, L83, L86, LT1
  • Fits: 4.8L, 5.3L, 5.7L, 6.0L, 6.2L Gen 3 and Gen 4 LS Engines & Gen 5 LT Engines
  • Non-DOD Only
  • See more on Amazon...

Brand: BTR   |   Manufacturer: BTR Brian Tooley Racing

Warranty: No Warranty

Amazon Price: $209.98 | as of 05/17/2024 (7:21pm pst) *DETAILS
Used Price: $201.58

See On Amazon




  #2

Michigan Motorsports Delphi LS7 Lifters Set of 16 and Guide Trays FITS LS1 LS2 LS3 LS6 LQ4 LQ9 LY5 LY6 LM7 4.8 5.3 5.7 6.0 6.2

Asin: B07G8M28BG

Commonly Used In 1997+ 4.8, 5.3, 5.7, 6.0, 6.2, 7.0 Gm Ls Applications. They Will Also Work In Sbc And Lt1 Applications That Originally Came With Hydraulic Roller Lifters..
Oem New Guide Trays Are Always Recommended When Changing Lifters. Used Or "Aftermarket" Guide Trays Are Often The Cause Of Lifters Turning In The Guide Trays Causing Damage To The Camshaft..
Michigan Motorsports Buys Delphi Ls7 Lifters In Very Large Quantities In Order To Offer The Best Price Available. See Pictures For Details. Lifters Are Packaged In Sets Of 16 And Include New Oem Quality Guide Trays..

Features

  • Michigan Motorsports Delphi LS7 Lifter Set of 16 Plus 4 OEM 12595365 Guide Trays.
  • Michigan Motorsports buys Delphi LS7 Lifters in very large quantities in order to offer the best price available. See pictures for details. Lifters are packaged in sets of 16 and include new OEM Quality Guide Trays.
  • Commonly used in 1997+ 4.8, 5.3, 5.7, 6.0, 6.2, 7.0 GM LS Applications. They will also work in SBC and LT1 applications that originally came with hydraulic roller lifters.
  • OEM New Guide trays are always recommended when changing lifters. Used or Aftermarket guide trays are often the cause of lifters turning in the guide trays causing damage to the camshaft.
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Michigan Motorsports

Dimensions: 50.00 x 100.00 x 100.00 Centimeters   |   Weight: 0.00 pounds

Amazon Price: $184.99 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon




  #3

Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed Fits LS2 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0

Asin: B01JDIQRQK   |   Model: 25100-001   |   PartNumber: 25100-001

These Rocker Arms Are A Must Have For Any Aggressive Heads And Cam Combo..
16 Ls Series Rocker Arms With Roller Bearing Trunnion Upgrade Installed,16 High Strength Allen Head Bolts For Ls Rockers.
The Caged Roller Bearings That Greatly Reduce The Possibility Of The Bearing Failure Experienced With Stock Ls1 Needle Bearings, Which Can Send Loose Needles Throughout The Engine Upon Failure..
Fits All These Applications: Ls1/Ls2/Ls6/ Lr4 Vortec 5300 Lm7 L59 Lm4 L33 – 4.8/5.3/5.7/6.0/ Engines. Will Not Fit Rectangle Port/"Ls3" Style Heads..
We Utilize Ls Rocker Arms And Install New Ls1 Rocker Arm Retro-Fit Trunion Kit That Replaces The Cageless, Loose Oem Needle Bearings And Powdered Metal Trunion With A Premium 8620 Steel Alloy Trunion And Caged Roller Bearings For Added Durability..
Ls1 Rocker Arms Have Been Disassembled And New Trunion Bearings Have Been Professionally Installed. Ls1 Style Bolts Are Included For Installation..

Features

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. Michigan Motorsports' LS1 Rocker Arms with Trunnion Bearings Professionally Installed
  • LS1 Rocker Arms have been disassembled and new Trunion Bearings have been professionally installed. LS1 style bolts are included for installation.
  • These rocker arms are a must have for any aggressive heads and cam combo.
  • We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability.
  • The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure.
  • Fits all these applications: LS1/LS2/LS6/ LR4 Vortec 5300 LM7 L59 LM4 L33 4.8/5.3/5.7/6.0/ Engines. Will not fit Rectangle Port/LS3 Style heads.
  • 16 LS Series Rocker Arms with Roller Bearing Trunnion Upgrade Installed,16 High Strength Allen head bolts for LS Rockers
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Michigan Motorsports

Dimensions: 2.00 x 8.00 x 6.00 inches

Warranty: 30 Days from Purchase Date

Amazon Price: $199.99 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon




  #4

Melling M29517 Oil Pump Pickup O-ring Seals for LS Engines 4.8 5.3 5.7 6.0 6.2 LS1

Asin: B0BTTV27B5   |   Model: M29517   |   PartNumber: M29517

One Of The Most Common Causes Of Low Oil Pressure On High Mileage Or Aged Ls Engines Is The Oil Pickup Tube O-Ring At The Oil Pump Inlet. These O-Rings Harden With Age And Heat, Eventually Allowing The Oil Pump To Pull Air In Past The Seal. This Kit From Melling Includes Both Styles/Thicknesses Of O-Rings Used On The Ls Engines As Well As Instructions To Identify Which Seal You Need To Use, Eliminating The Need To Identify Or Guess Which O-Ring You Have Before Ordering..
Does Not Fit Ls7 Or Dry Sump Ls3 Engines Used In Grand Sport Corvettes. Fits All Other Ls-Based Car, Truck And Suv Engines..
Fits 1997-2013 Ls-Based Engines (Up To 2018 On L96 Engines)..
Fits 1997-2013 Ls-Based V8 Engines 4.8L 5.3L 5.7L 6.0L 6.2L.

Features

  • Melling M29517 Oil Pump Pickup Tube O-ring Kit
  • Fits 1997-2013 LS-Based V8 Engines 4.8L 5.3L 5.7L 6.0L 6.2L
  • One of the most common causes of low oil pressure on high mileage or aged LS engines is the oil pickup tube O-ring at the oil pump inlet. These O-rings harden with age and heat, eventually allowing the oil pump to pull air in past the seal. This kit from Melling includes both styles/thicknesses of O-rings used on the LS engines as well as instructions to identify which seal you need to use, eliminating the need to identify or guess which O-ring you have before ordering.
  • Fits 1997-2013 LS-based engines (up to 2018 on L96 engines).
  • Does not fit LS7 or dry sump LS3 engines used in Grand Sport Corvettes. Fits ALL other LS-based car, truck and SUV engines.
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Melling

Warranty: 30 days

Amazon Price: $9.99 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon




  #5

Michigan Motorsports 5.3 4.8 Stock Size Moly Piston Rings LM7, L59, LS4, LY5, LMG, LMF, LH6 LC9 2M4978

Asin: B08D8QXMPH   |   Model: 2M4978   |   PartNumber: 2M4978

2M 4978 Ring Set Is Complete Set For One Engine..
4.8L 1999-2015 Vins A,C,V,O,7,4 -5.3L 1999-2013 Lc9, Ls4 Vins 0,3,4,B,C,J,L,M,P,T,Z.
3.779" 96Mm Bore 1.5Mm 1.5Mm 3.0Mm Ring Configuration.
Set Of Standard Size Moly Replacement Rings For 1999-2015 Chevy Lc9, Ls4 4.8 5.3L.

Features

  • 5.3 Stock Replacement Piston Rings LM7, L59, LS4, LY5, LMG, LMF, LH6 LC9
  • Set of Standard Size Moly Replacement rings for 1999-2015 Chevy LC9, LS4 4.8 5.3L
  • 2M 4978 Ring set is complete set for one engine.
  • 3.779 96mm Bore 1.5mm 1.5mm 3.0mm ring configuration
  • 4.8L 1999-2015 VINs A,C,V,O,7,4 -5.3L 1999-2013 LC9, LS4 VINs 0,3,4,B,C,J,L,M,P,T,Z
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Michigan Motosports

Amazon Price: $59.99 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon




  #6

Michigan Motorsports LS Oil Pan Oil Pressure Relief Valve Plug for 2007+ LS3 L99 L96 L92 LMG LC9 L77 L76 LH6 4.8L 5.3L 6.0L 6.2L Bypass

Asin: B0CC6TLFKM   |   Model: MM-1202PlugKit   |   PartNumber: MM-1202PlugKit

On Engines Without Dod/Afm Or Vvt Systems (Or Engines Where Those Systems Have Been Deleted) The Bypass Valve Can Be Safely Eliminated With This Plug To Prevent These Issues..
Applications For This Product Include (Gasoline V8 Models Only): Cadillac Escalade 2007-2014 Avalanche 2007-2013 Camaro 2010-2015 Caprice 2011-2017 Colorado 2010-2012 Express 1500 2008-2014 Express 2500 2008-2020 Express 3500 2008-2020 Express 4500 2010-2019.
Silverado 1500 2007-2013 Silverado 2500 2007-2019 Silverado 3500 2007-2019 Ss 2014-2017 Suburban 2016-2017 Suburban 1500 2007-2014 Suburban 2500 2007-2013 Tahoe 2007-2014 Gmc Canyon 2010-2012 Gmc Savana 1500 2008-2014 Gmc Savana 2500 2008-2020 Gmc Savana 3500 2008-2020 Gmc Savana 4500 2010-2019 Gmc Sierra 1500 2007-2013 Gmc Sierra 2500 2007-2019 Gmc Sierra 3500 2007-2019 Gmc Yukon 2007-2014 Gmc Yukon Xl 1500 2007-2014 Gmc Yukon Xl 2500 2007-2013 Hummer H2 2008-2009 Pontiac G8 2008-2009.
Installation Requires Removal Of The Oil Pan From The Engine. Torque To 22Lb-Ft.
The Secondary Oil Pressure Relief Valve Located Inside The Rear Of The Oil Pan On Gen 4 Ls Engines Is Prone To Becoming Clogged By Debris, Causing Low Oil Pressure Conditions..

Features

  • Bypass Plug for Gen 4 LS Oil Pan Oil Pressure Relief Valve Fits 2007-2013 LS Based V8 Engines 4.8L 5.3L 6.0L. 6.2L
  • The secondary oil pressure relief valve located inside the rear of the oil pan on Gen 4 LS engines is prone to becoming clogged by debris, causing low oil pressure conditions.
  • On engines without DOD/AFM or VVT systems (or engines where those systems have been deleted) the bypass valve can be safely eliminated with this plug to prevent these issues.
  • Installation requires removal of the oil pan from the engine. Torque to 22lb-ft
  • Applications for this product include (Gasoline V8 models only): CADILLAC ESCALADE 2007-2014 AVALANCHE 2007-2013 CAMARO 2010-2015 CAPRICE 2011-2017 COLORADO 2010-2012 EXPRESS 1500 2008-2014 EXPRESS 2500 2008-2020 EXPRESS 3500 2008-2020 EXPRESS 4500 2010-2019
  • SILVERADO 1500 2007-2013 SILVERADO 2500 2007-2019 SILVERADO 3500 2007-2019 SS 2014-2017 SUBURBAN 2016-2017 SUBURBAN 1500 2007-2014 SUBURBAN 2500 2007-2013 TAHOE 2007-2014 GMC CANYON 2010-2012 GMC SAVANA 1500 2008-2014 GMC SAVANA 2500 2008-2020 GMC SAVANA 3500 2008-2020 GMC SAVANA 4500 2010-2019 GMC SIERRA 1500 2007-2013 GMC SIERRA 2500 2007-2019 GMC SIERRA 3500 2007-2019 GMC YUKON 2007-2014 GMC YUKON XL 1500 2007-2014 GMC YUKON XL 2500 2007-2013 HUMMER H2 2008-2009 PONTIAC G8 2008-2009
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Michigan Motorsports

Warranty: 30 Days

Amazon Price: $15.99 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon




  #7

Michigan Motorsports Four Pole Cam Gear -Fits 4.8 5.3 5.7 6.0 LS2 LS3

Asin: B07QM2SJW1   |   Model: 12586481   |   PartNumber: 12586481

Quantity 1 Performance 3-Bolt 4 Pole Cam Gear 12586481.
Replaces Gm #12586481.
Will Also Work In Gen 3 Ls Applications With The Cam Sensor Located At The Rear Of The Block..
This Gm 3-Bolt, 4 Pole Timing Chain Gear Is Used When Converting From A 1 Bolt Camshaft To 3 Bolt Camshaft..

Features

  • Michigan Motorsports Four Pole Cam Gear -Fits 4.8 5.3 5.7 6.0 LS2 LS3
  • This GM 3-Bolt, 4 Pole timing chain gear is used when converting from a 1 bolt camshaft to 3 bolt camshaft.
  • Quantity 1 Performance 3-Bolt 4 Pole Cam Gear 12586481
  • Will also work in Gen 3 LS applications with the cam sensor located at the rear of the block.
  • Replaces GM #12586481
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Michigan Motorsports

Dimensions: 0.50 x 5.25 x 5.25 inches

Warranty: 30 Days from Purchase Date

Amazon Price: $26.71 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon




  #8

Michigan Motorsports 7.400 Pushrods Fits 4.8 5.3 5.7 6.0 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92

Asin: B07HZ7HNMD

Set Of Sixteen (16) Stock Replacement Pushrods For 1997-2012 Gm Ls-Series Gen Iii And Iv Small Block V-8 Engines..
Pushrod Specifications Are As Follows: Overall Length: 7.400" Tube Size: 5/16" X .075" (Stock) Material: 1010 Ends: 5/16" Ball (Drilled).
These Are The Stock Length 7.400" Long 5/16" Pushrods.
Fits 4.8 5.3 5.7 6.0 Ls1 Ls2 Ls3 Ls6 L99 Ls4 Ls9 Lsa Lq4 Lq9 L76 L92.

Features

  • LS 7.400" Pushrods
  • Fits 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92
  • Set of sixteen (16) stock replacement pushrods for 1997-2012 GM LS-series GEN III and IV small block V-8 engines.
  • These are the stock length 7.400 Long 5/16 pushrods
  • Pushrod specifications are as follows: OVERALL LENGTH: 7.400 TUBE SIZE: 5/16 x .075 (stock) MATERIAL: 1010 ENDS: 5/16 ball (drilled)
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Michigan Motorsports

Dimensions: 50.00 x 100.00 x 100.00 Centimeters   |   Weight: 0.00 Pounds

Amazon Price: $49.99 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon




  #9

Michigan Motorsports Valve Lock Keepers for LS LT LS1 LS2 LS3 LQ4 LQ9 L83 L86 4.8 5.3 5.7 6.0 6.2 7.0, 7 degree 8mm Valve Locks for stock springs along with BTR TSP PAC MM Dual Spring Retainers

Asin: B09D579MCL   |   Model: Ai141-32   |   PartNumber: Ai141-32

Quantity 32 (Enough For Both Heads).
Compatible With All Chevrolet Ls & Lt Series Engines 1997-Current (99-2021 4.8L,5.3L,6.0L,6.2L Vortec Truck Engines) Ls1, Ls2, Ls3, Ls6, Ls7, Ls9, Gm 4.8L 5.3L 6.0L 6.2L. Also Fits Lsx Lm7 Lr4 Lq4 Lq9 L33 Lh6 L92 L76 L99 L96 L82 L83 L84 L86 L87 L82 L83 L84 L86 L87 Lt1 L8b Lt4 Lt5 Lt2.
7 Degree 8Mm Standard Height Valve Locks For Ls Style Retainers..
Will Fit Oem, Btr, Tsp, Michigan Motorsports And Pac Dual Valve Springs.

Features

  • LS Vavle Locks for Single and Dual Valve Spring Retainers.
  • Will fit OEM, BTR, TSP, Michigan Motorsports and PAC Dual Valve Springs
  • Quantity 32 (enough for both heads)
  • 7 degree 8mm standard height valve locks for LS style retainers.
  • Compatible with ALL Chevrolet LS & LT Series Engines 1997-current (99-2021 4.8L,5.3L,6.0L,6.2L Vortec Truck Engines) LS1, LS2, LS3, LS6, LS7, LS9, GM 4.8L 5.3L 6.0L 6.2L. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87 L82 L83 L84 L86 L87 LT1 L8B LT4 LT5 LT2
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Michigan Motorsports

Amazon Price: $19.99 | as of 05/17/2024 (7:21pm pst) *DETAILS
List Price: $22.99

See On Amazon




  #10

NGK BR7EF #3346 Spark Plugs - Set of 8 Nickel Copper for LS Engines

Asin: B0C54BJCVP   |   Model: NGK 3346-08   |   PartNumber: NGK 3346-08

This Br7ef Plug Is Recommended For Boosted And Nitrous Applications (Naturally Aspirated Ls Applications Should Consider The Tr5 Or Tr6 Plugs)..
90 Degree V-Groove Center Electrode Allows The Spark To Occur Closer To The Outside Of Both The Center And Ground Electrodes For Better Flame Expansion And Improved Ignitability Ngk Spark Plugs Are Tested To The Highest Oem Original Equipment Standards 14Mm Thread, .708" Reach, 5/8" Hex, Non-Projected Tip.
One Heat Range Colder Than Stock For Ls7, Ls9, Lsa Engines. Two Steps Colder Than Stock Heat Range For All Other Ls Engines..
Factory Pre-Gapped To .028" Cold-Rolled Threads Prevent Cross-Threading And Damage To Cylinder Heads Trivalent Plating Eliminates Need For Anti-Seize On Threads High-Grade Alumina Silicate Ceramic Creates A Stronger Insulator To Reduce Dielectric Punch-Through 98% Pure Copper Core Increases Heat Dissipation For Reliable Starts And Prevents Spark Plug Overheatin.
These Ngk Br7ef V-Power Nickel/Copper Spark Plugs Are Two Heat Ranges Colder Than The Stock Plugs For Most Ls Car & Truck Engines And Have A Non-Projected Tip For Power Adder Use. They Feature A Specially Designed V-Grooved Center Electrode, Improving Ignitability And Reducing Quenching. Nickel/Copper Spark Plugs Are An Economical Alternative To Exotic Metal Plugs In Applications Where Extended Service Intervals Are Not Required..

Features

  • NGK BR7EF 3346 Spark Plugs - Set of 8 Fits 1997-2013 LS-Based V8 Engines 4.8L 5.3L 5.7L 6.0L 6.2L 7.0L
  • These NGK BR7EF V-Power Nickel/Copper spark plugs are two heat ranges colder than the stock plugs for most LS car & truck engines and have a non-projected tip for power adder use. They feature a specially designed V-grooved center electrode, improving ignitability and reducing quenching. Nickel/Copper spark plugs are an economical alternative to exotic metal plugs in applications where extended service intervals are not required.
  • This BR7EF plug is recommended for boosted and nitrous applications (naturally aspirated LS applications should consider the TR5 or TR6 plugs).
  • Factory Pre-gapped to .028 Cold-rolled threads prevent cross-threading and damage to cylinder heads Trivalent plating eliminates need for anti-seize on threads High-grade alumina silicate ceramic creates a stronger insulator to reduce dielectric punch-through 98% pure copper core increases heat dissipation for reliable starts and prevents spark plug overheatin
  • 90 degree V-Groove center electrode allows the spark to occur closer to the outside of both the center and ground electrodes for better flame expansion and improved ignitability NGK spark plugs are tested to the highest OEM original equipment standards 14mm thread, .708 reach, 5/8 hex, non-projected tip
  • One heat range colder than stock for LS7, LS9, LSA engines. Two steps colder than stock heat range for all other LS engines.
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: NGK

Warranty: 30 days

Amazon Price: $34.99 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon




  #11

LS7 Lifters Set of 16 and Guide Trays, WQdunmo FITS LS1 LS2 LS3 LS6 LQ4 LQ9 LY5 LY6 LM7 4.8 5.3 5.7 6.0 7.0 Compatible with GM LS Applications

Asin: B0B5LPM6TG

Quality And Design:Manufactured From High Quality Durable Materials For Long Wear.Precision Engineered For Optimum Fit And Function.Designed For Long-Life And Maintenance Free Performance.In Order To Protect The Parts, It Is Normal To Have Oil On The Parts..
Lifters Maintain:1. The Oil Is Dry And The Wear And Tear, The Newly Purchased Hydraulic Roller Lifters Cannot Be Installed Directly, It Needs To Be Infiltrated And Lubricated First 2.Use Inferior Motor Oil Or The Oil Deteriorates. If There Are Too Many Impurities In The Oil, It Will Aggravate The Wear Of The Hydraulic Tappet..
Precautions:When Installing A New Hydraulic Roller Lifters, The Diesel Engine Should Not Be Operated Within 30 Minutes (Because The Valve Will Hit The Piston At This Time),And It Is Normal To Produce A Noise At The Initial Stage Of Starting The Engine..
Compatible With Chevy 1992-2014,Gmc 1992-2013, Buick 1988-2008,Cadillac 2002-2006,Hummer 2003-2007 ,Oldsmobile 1986-1999,Pontiac 1988-2006.Ls1, Ls2, Ls3, Ls6, Ls7, Ls9 Lsx,4.8L, 5.3L, 5.7L, 6.0L Engines.Before Purchasing, Please Use Fitment To Check Whether Your Vehicle Is Compatible With This Part.Place 12499225 Hl124.

Features

  • Lifters Complete set of replacement lifters. Includes 16 hydraulic roller lifters and 4 new guide trays.Replace GENERAL MOTORS-12499225,ACDELCO-HL124,SEALED POWER-HT2148,MELLING-JB2079 .
  • Compatible with Chevy 1992-2014 GMC 1992-2013 Buick 1988-2008 Cadillac 2002-2006 Hummer 2003-2007 Oldsmobile 1986-1999 Pontiac 1988-2006.LS1, LS2, LS3, LS6, LS7, LS9 LSX,4.8L, 5.3L, 5.7L, 6.0L Engines.Before purchasing, please use fitment to check whether your vehicle is compatible with this part.place 12499225 HL124
  • Quality and Design Manufactured from high quality durable materials for long wear.Precision engineered for optimum fit and function.Designed for long-life and maintenance free performance.In order to protect the parts, it is normal to have oil on the parts.
  • Precautions When installing a new hydraulic roller lifters, the diesel engine should not be operated within 30 minutes (because the valve will hit the piston at this time) and it is normal to produce a noise at the initial stage of starting the engine.
  • Lifters Maintain 1. The oil is dry and the wear and tear, the newly purchased hydraulic roller lifters cannot be installed directly, it needs to be infiltrated and lubricated first 2.Use inferior motor oil or the oil deteriorates. If there are too many impurities in the oil, it will aggravate the wear of the hydraulic tappet.
  • See more on Amazon...

Brand: WQdunmo   |   Manufacturer: DUNMO

Dimensions: 4.12 x 8.32 x 8.21 inches

Amazon Price: $83.10 | as of 05/17/2024 (7:21pm pst) *DETAILS
Used Price: $60.62

See On Amazon




  #12

Michigan Motorsports LS Engine Block Coolant & Oil Plug Kit -Fits 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LQ4 LM7 L99 LR4

Asin: B09TFZHKWS   |   Model: E1300   |   PartNumber: E1300

Includes: Four Threaded External Coolant/Oil Port Plugs.
One Oil Galley Barbell Plug For Rear Of Engine.
One Press-In Oil Galley Plug For Front Of Engine.
Fits All 1997-2013 Ls1 Based Engines 4.8 5.3 5.7 6.0 6.2 7.0.

Features

  • Michigan Motorsports Engine Block Plug Kit for LS Engines
  • Fits all 1997-2013 LS1 Based Engines 4.8 5.3 5.7 6.0 6.2 7.0
  • Includes: Four threaded external coolant/oil port plugs
  • One press-in oil galley plug for front of engine
  • One oil galley barbell plug for rear of engine
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Michigan Motorsports

Amazon Price: $28.99 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon




  #13

7.400" Pushrod Set LS Pushrods 5/16 Diameter Chromoly Push Rods for 1999-2013 Silverado Sierra LS1 LS2 LS3 LS6 LS7 LS9 LSX Engines 4.8L 5.3L 6.0L

Asin: B0BCW8M163   |   Model: pushrod 7.4   |   PartNumber: pushrod 7.4

Push Rod Fit For 2008-2009 Pontiac G8, For 2000-2013 Tahoe, Yukon, Escalade, For 2003-2009 H2 Hummer, For 2001-2013 Chevrolet Avlanche, For 1999-2013 Silverado & Sierra (4.8L, 5.3L, 6.0L).
7.4 Pushrods Set, Fits Ls1, Ls2, Ls3, Ls6, Ls7, Ls9 Lsx Engines.
Ls Pushrods Fit For 1999-2002 Camaro & Firebird, For 2010-2013 Camaro, For 1999-2013 Corvette, For 2004-2006 Pontiac Gto, For 2004-2007 Cadillac Cts-V.

Features

  • Chromoly pushrods: overall length of 7.400", overall diameter of 5/16", wall thickness .080", set of 16
  • LS pushrods fit for 1999-2002 Camaro & Firebird, for 2010-2013 Camaro, for 1999-2013 Corvette, for 2004-2006 Pontiac GTO, for 2004-2007 Cadillac CTS-V
  • Push rod fit for 2008-2009 Pontiac G8, for 2000-2013 Tahoe, Yukon, Escalade, for 2003-2009 H2 Hummer, for 2001-2013 Chevrolet Avlanche, for 1999-2013 Silverado & Sierra (4.8L, 5.3L, 6.0L)
  • 7.4 pushrods set, fits ls1, ls2, ls3, ls6, ls7, ls9 lsx engines
  • See more on Amazon...

Brand: SUSUCAR   |   Manufacturer: SUSUCAR

Warranty: 1 year

Amazon Price: $78.99 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon




  #14

Michigan Motorsports LS Oil Pan Gasket 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LQ4 LQ9 LS3 L92 L94 L76 L77 LY6 L96

Asin: B0BPJHK2QS

Compatible With The Following Vehicles-- 12612350 Oil Pan Gasket Compatible With 4.8L 5.3L 5.7L 6.0L 6.2L Gm Vortec Engine, For Silverado, For Tahoe, For Trailblazer, For Suburban, For Gmc Sierra, For Yukon, For Avalanche, For Cadillac Escalade, For Colorado, For Camaro, For Express,.
Regular Replacement To Prevent Leakage - Regular Replacement Of 12612350 Oil Pan Gaskets To Prevent Oil Leakage And Ensure The Normal Operation Of The Equipment. If You Notice Symptoms Such As Smoke, Engine Overheating, Oil Puddles Under The Vehicle, And Unusually Low Oil Levels, You May Need To Replace The Oil Pan Gasket..
For Caprice, For Impala, For Savana, For Envoy, For Canyon, For Buick Rainier, Model Year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020..
Replace Oem Models-- 12612350, Os30693r, 12558760, Os32241, Os21006, Os6315, Os6315p, 16792, 2005-481851, 343885, 257778, Pg3165.

Features

  • Qty-1 LS Oil Pan Gasket 4.8 5.3 5.7 6.0 6.2 Fits all Wet Sump LS3 L99 LSA LS9 L92 L9H L94 LS2 L76 L77 LY6 L96 LFA LZ1 LY5 LMG LMF LH6 LC9 LY2 L20 LS7 LS1 LS6 LQ4 LQ9 LR4 LM7 L59 LS4
  • Replace OEM Models-- 12612350, OS30693R, 12558760, OS32241, OS21006, OS6315, OS6315P, 16792, 2005-481851, 343885, 257778, PG3165
  • Compatible with the following vehicles-- 12612350 Oil pan gasket compatible with 4.8L 5.3L 5.7L 6.0L 6.2L GM Vortec engine, for Silverado, for Tahoe, for Trailblazer, for Suburban, for GMC Sierra, for Yukon, for Avalanche, for Cadillac Escalade, for Colorado, for Camaro, for Express,
  • for Caprice, for Impala, for Savana, for Envoy, for Canyon, for Buick Rainier, model year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020.
  • Regular replacement to prevent leakage - Regular replacement of 12612350 oil pan gaskets to prevent oil leakage and ensure the normal operation of the equipment. If you notice symptoms such as smoke, engine overheating, oil puddles under the vehicle, and unusually low oil levels, you may need to replace the oil pan gasket.
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Michigan Motorsports

Dimensions: 0.01 x 22.00 x 12.00 inches

Amazon Price: $31.99 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon




  #15

ICT Billet LS Idler Pulley Relocation Bracket for LS1 Intake Swap LQ4 LQ9 LSX 4.8L 5.3L 6.0L Truck Bracket Alternator Power Steering 551353 Billet Aluminum Made in USA 551353

Asin: B00YD899IO   |   Model: 551353   |   PartNumber: 551353   |   Ean: 0656729843536   |   UPC: 656729843536

Made In Wichita, Kansas From Aerospace Grade, Usa Produced, Billet Aluminum.
Natural Finish Aluminum, Includes Hardware..
Belt Routing Will Change. Requires Belt #780K6 For 105 Amp Alternators And #787K6 For High Output Alternators.
Will Require Modification Of Factory Bracket For Intake Manifold Clearance. Trim As Needed For Your Intake..

Features

  • This bracket moves the idler pulley over and down, between the alternator and power steering pulleys, to allow LS1 intake manifolds to be used with truck accessory brackets.
  • Will require modification of factory bracket for intake manifold clearance. Trim as needed for your intake.
  • Made in Wichita, Kansas from Aerospace Grade, USA Produced, Billet Aluminum
  • Belt routing will change. Requires belt #780K6 for 105 amp alternators and #787K6 for high output alternators
  • Natural finish aluminum, includes hardware.
  • See more on Amazon...

Brand: ICT Billet   |   Manufacturer: ICT Billet

Dimensions: 1.50 x 4.60 x 5.60 inches

Amazon Price: $24.99 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon




  #16

Michigan Motorsports HD Timing Chain 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4

Asin: B07QL3DHY2   |   Model: F5200   |   PartNumber: F5200

This Chain Can Be Used On All Ls Engines And Can Be Used With Stock Gears..
Replacement For Gm Part #'S: 12646386 And 12586482.
This Is A Heavy Duty Single Roller Chain That Uses An Improved Alloy Steel And The Sideplates Have An Increased Thickness To Improve Strength.

Features

  • Michigan Motorsports LS Heavy Duty Timing Chain
  • This is a heavy duty single roller chain that uses an improved alloy steel and the sideplates have an increased thickness to improve strength
  • This chain can be used on all LS engines and can be used with stock gears.
  • Replacement for GM Part #'s: 12646386 and 12586482
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Michigan Motorsports

Dimensions: 0.05 x 6.00 x 4.00 inches

Amazon Price: $57.99 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon




  #17

ICT Billet LS Throttle Body Adapter - LS1 3 Bolt Intake Manifold to LS3 4 Bolt Throttle Body DBC LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LSX 4.8L 5.3L 5.7L 6.0L Billet 551513

Asin: B011CMYWVW   |   Ean: 0656729845134, 7258006937391   |   UPC: 656729845134

Compatible With Both Dbw And Dbc 4 Bolt Throttle Bodies..
Throttle Body Adapter Will Come With A Adapter Plate, All Bolts, And An Oring Seal Needed For Installation..
Made In Wichita, Ks From Aerospace Grade, Usa Billet Aluminum..
Adapter Has 75Mm Through Hole, Tapered To 92Mm For The Throttle Body..

Features

  • This throttle body adapter will allow you to install a 4 bolt LS throttle body onto a 3 bolt LS intake. For example, a 92mm billet throttle body
  • Adapter Has 75mm Through Hole, Tapered To 92mm For The Throttle Body.
  • Compatible With Both DBW And DBC 4 Bolt Throttle Bodies.
  • Made in Wichita, KS from aerospace grade, USA billet aluminum.
  • Throttle Body Adapter Will Come With A Adapter Plate, All Bolts, And An Oring Seal Needed For Installation.
  • See more on Amazon...

Brand: ICT Billet   |   Manufacturer: ICT Billet

Dimensions: 0.90 x 4.90 x 5.80 inches

Amazon Price: $38.99 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon




  #18

Melling LS Oil Pickup Tube Retainer Support Bracket M29500 LS1 4.8 5.3 5.7 6.0 6.2 LQ4 LM7 LS3

Asin: B0C4WBR8Y6   |   Model: M29500   |   PartNumber: M29500

This Lightweight Billet Aluminum Bracket From Melling Provides Added Support For Holding The Oil Pump Pickup In Place, Preventing Air From Being Sucked Past The O-Ring..
This Retainer Installs Across From The Gm Mounting Bolt, Providing Support To The Pickup From Both Sides. Will Not Work With Pick Up Tubes That Have The Flanged Retainer Tab (See Photo)..
Includes Support Bracket And Mounting Bolt..
Fits 1999-2013 Ls Based Engines 4.8L 5.3L 5.7L 6.0L 6.2L.

Features

  • Melling LS Oil Pump Pickup Tube Support Bracket
  • Fits 1999-2013 LS Based Engines 4.8L 5.3L 5.7L 6.0L 6.2L
  • This lightweight billet aluminum bracket from Melling provides added support for holding the oil pump pickup in place, preventing air from being sucked past the O-ring.
  • Includes support bracket and mounting bolt.
  • This retainer installs across from the GM mounting bolt, providing support to the pickup from both sides. Will not work with pick up tubes that have the flanged retainer tab (see photo).
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Melling

Warranty: 30 Days

Amazon Price: $28.99 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon




  #19

Michigan Motorsports 5 Wire Mass Air Flow MAF Harness Sensor Connector -Fits LS2, LS1 LQ4 4.8 5.3 6.0 4.3 and 8.1 GM Truck

Asin: B084WLP9K7

Fits Many 2001-2007 Ls2, Ls1 Corvette (With Five Wire Maf) And 1999 To 2006 4.8L, 5.3L, 6.0L V8 Engines.
Michigan Motorsports Uses High Quality Materials To Ensure Peak Durability And Performance When It Matters Most.
Interchange Part Number: Pt1274, Fits Maf 15904068, 25168491, 25138411.
24" Extension Harness - See Product Description For Fitment, But Not Limited To That List.

Features

  • GM 5 Wire Mass Air Flow MAF Extension Sensor Connector Fits: LS2, LS1 Corvette, LQ4 4.8 5.3 6.0 4.3 and 8.1 GM Truck
  • 24 Extension Harness - see product description for fitment, but not limited to that list
  • Fits Many 2001-2007 LS2, LS1 Corvette (with five wire MAF) and 1999 to 2006 4.8l, 5.3l, 6.0l V8 engines
  • Interchange Part Number: PT1274, Fits MAF 15904068, 25168491, 25138411
  • Michigan Motorsports uses high quality materials to ensure peak durability and performance when it matters most
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Michigan Motorsports

Amazon Price: $19.99 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon




  #20

Michigan Motorsports Lower Timing Chain Crank Gear Fits 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4

Asin: B07QMYHF5H   |   Model: F5100   |   PartNumber: F5100

These Sprockets Are Made From High-Quality Materials And Are A Vital Link For Engine Timing..
Fits All Ls Engines Except Ls7 And Ls9.
Fits 4.8 5.3 5.7 6.0 Ls1 Ls2 Ls3 Ls6 L99 Ls4 Ls9 Lsa Lq4.
Designed To Deliver Strength And Accuracy For Many Miles Of Dependable Service..

Features

  • Lower Timing Chain Crankshaft Gear - Replaces 12556582
  • Designed to deliver strength and accuracy for many miles of dependable service.
  • These sprockets are made from high-quality materials and are a vital link for engine timing.
  • Fits 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4
  • Fits all LS engines except LS7 and LS9
  • See more on Amazon...

Brand: Michigan Motorsports   |   Manufacturer: Michigan Motorsports

Warranty: 30 Days

Amazon Price: $35.99 | as of 05/17/2024 (7:21pm pst) *DETAILS

See On Amazon





Looking For Something Else? Search

Home & Garden


Home Improvement


Industrial


Electronics


Office


Car & Automotive


Sporting Goods


Beauty Supplies


Health & Personal Care


Fashion


Toys and Hobby



Additional Categories


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.
As an Amazon Associate we earn from qualifying purchases.