HSS M2 Taper Chucking Reamer Spiral Flute 5/8" Bridge/Construction Reamer Chucking Drill Bit Enlarge Aligh Holes in Steel Metal Iron
Asin: B0CRSGSH9V | Model: CR-S5L | PartNumber: CR-S5L
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.👉 【Taper Design】:The Taper Design Ensures Gradual And Accurate Hole Expansion, Providing A Smooth Finish. The Tapered Point Design Allows The Reamer Bit To Enter Non-Linear, Overlapping Holes To Align Bolt Holes. Enlarge The Holes In The Steering Knuckle And Linkage Arms..
👉 【Chucking Shank】: Round Shank With 3 Flats To Prevent Slipping In The Drill Chuck, Safety Flange/ Stop Collar To Prevent The Reamer Running Through The Hole..
👉 【Versatile Application】: Designed For Aligning An Existing Hole And Enlarging Undersized Hole. This Taper Chucking Reamer Kit Can Increase The Taper To Facilitate Hole Access, Especially Drilling Larger Holes In The Link Arms And Steering Knuckles..
👉 【More Application】: Enlarge Or Align Existing Holes Through Mild Steel, Alloys, Aluminum, Wood, Plastic, Fiberglass Or Any Similar Hardness Material Prior To Rivet Or Bolt Installation. Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
👉 【Spiral Flutes & Safety Stop】: Equipped With Spiral Flutes To Aid In Efficient Chip Evacuation, Reducing Heat Buildup And Improving Cutting Performance. Left Helix/Right Hand Cut Sheers Chips Away From Operator. Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability.
👉 【Material Of Chucking Reamer】: This Reamer Is Constructed From High-Quality Hss M2 Steel For Durability And Longevity. M2 High Speed Steel - Hss M2 Ensures Sharp And Fast Execution In Most Hard Steel Material For Clean Results, While Provides Good Wear Resistance In Mild Steels And Non-Ferrous Materials..
Features
- SIZE OF REAMERS : 5/8 inch with 1/2 Shank
- MATERIAL OF CHUCKING REAMER : This reamer is constructed from high-quality HSS M2 Steel for durability and longevity. M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials.
- TAPER DESIGN :The taper design ensures gradual and accurate hole expansion, providing a smooth finish. The tapered point design allows the reamer bit to enter non-linear, overlapping holes to align bolt holes. Enlarge the holes in the steering knuckle and linkage arms.
- SPIRAL FLUTES & SAFETY STOP : Equipped with spiral flutes to aid in efficient chip evacuation, reducing heat buildup and improving cutting performance. Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability
- VERSATILE APPLICATION : Designed for aligning an existing hole and enlarging undersized hole. This Taper Chucking Reamer Kit can increase the taper to facilitate hole access, especially drilling larger holes in the link arms and steering knuckles.
- MORE APPLICATION : Enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- CHUCKING SHANK : Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole.
- See more on Amazon...
Brand: PEAK-CUT | Manufacturer: MAX-CRAFT
Dimensions: 3.00 x 10.00 x 5.00 inches
See On Amazon Similar To HSS M2 Taper Chucking Reamer
#1
Performance Tool W2967 Tapered Reamer Set with T-Handle and Carbon Steel Contstruction to Align Holes or Remove Burrs from Pipe, Tubes, and More (2-Piece), Black
Asin: B073XVRG74 | Model: W2967 | PartNumber: W2967 | Ean: 0039564012730 | UPC: 039564012730
T-Handle Design For Easy Turning And Sure Handling.
Lifetime Warranty: Each Tool Is Tested Against Industry Standards For Hardness, Torque, Finish, And Usability And Should Last A Lifetime Under Normal Use.
Capacity: 1/8" To 1/2" (3 - 13Mm) And 5/32" To 7/8" (4 - 22Mm).
The Heat Treated #45 High Carbon Steel For Longer Service Life.
Features
- Tapered reamers will help align holes, remove burrs from cut pipe, tubing, and Conduit, and enlarge and Countersink holes in sheet metal, plastic, and other materials
- The heat treated #45 high carbon steel for longer service life
- T-handle design for easy turning and sure handling
- Capacity: 1/8 to 1/2 (3 - 13mm) and 5/32 to 7/8 (4 - 22mm)
- LIFETIME WARRANTY: Each tool is tested against industry standards for hardness, torque, finish, and usability and should last a lifetime under normal use
- See more on Amazon...
Brand: Performance Tool | Manufacturer: Performance Tool
Dimensions: 8.65 x 0.90 x 4.25 inches | Weight: 0.55 pounds
Warranty: lifetime
See On Amazon #2
5/8 Bridge Construction Reamer Drill Bit, M2 HSS Taper Chucking Reamer for Steel Alloy Metal Wood Plastic, 1/2" Non-Slip Shank, 5-Spiral Flutes Car Reamer, to Align or Enlarge Holes, 16mm
Asin: B0CFJC9J1N
Special Features – The 5/8Inch Reamer Bit Features A 1/2" Round Shank With 3-Sides, A Tapered Point, And A Safe Stop, Ensuring A Firm Grip In The Chuck, Allowing It To Enter Imperfect Holes To Ream Steadily, And Stopping The Drill Safely When The Hole Is Complete..
User Tips: 1. Always Wear Appropriate Safety Gear. 2. Securely Mount The Reamer Drill Bit In The Chuck Of Your Portable Electric Or Pneumatic Tools. 3. Position The Bit In The Predrilled Hole, Gradually Increase Speed, Maintain Pressure, Keep The Tool Steady, And Add Cutting Oil. 4. Reduce Speed Near The Desired Hole Size For A Smooth Finish..
Broad Applications – This 5/8" Reamer Drill Bit Can Efficiently Handle Steel, Metal, Alloy Aluminum, Brass, Copper, Iron, Nickel, Plastic And Pvc Pipes Etc.; Makes It A Go-To Tool For Both Woodworking And Metalworking Projects, Such As Bridge Construction, Steel Erection, Automotive Truck Trailer Maintenance..
Built To Last - Our 5/8" Conduit Reamer Is Constructed With M2 High-Speed Steel. Featuring Five Long Tapped Right-Hand Spiral Flutes With Precisely Ground Sharp Edges, Enables It To Cut Materials Smoothly And Remove Debris Efficiently, And Guarantees Durability And Performance..
Features
- Seamlessly and Expertly - The bridge reamer, also known as construction reamers, is used to align or enlarge or smooth Predrilled holes to 5/8" and fit precisely before installing bolts or rivets. This heavy-duty 5/8" reamer drill bit is crafted to ensure seamless and expert performance in your projects.
- Built to Last - our 5/8 conduit reamer is constructed with M2 high-speed steel. Featuring five long tapped right-hand spiral flutes with precisely ground sharp edges, enables it to cut materials smoothly and remove debris efficiently, and guarantees durability and performance.
- Special Features The 5/8inch reamer bit features a 1/2 Round Shank with 3-Sides, a Tapered Point, and a Safe Stop, ensuring a firm grip in the chuck, allowing it to enter imperfect holes to ream steadily, and stopping the drill safely when the hole is complete.
- Broad applications This 5/8 reamer drill bit can efficiently handle steel, metal, alloy aluminum, brass, copper, iron, nickel, plastic and PVC pipes etc.; makes it a go-to tool for both woodworking and metalworking projects, such as bridge construction, steel erection, automotive truck trailer maintenance.
- User Tips: 1. Always wear appropriate safety gear. 2. Securely mount the reamer drill bit in the chuck of your portable electric or pneumatic tools. 3. Position the bit in the Predrilled Hole, gradually increase speed, maintain pressure, keep the tool steady, and add cutting oil. 4. Reduce speed near the desired hole size for a smooth finish.
- See more on Amazon...
Brand: DKIBBITH | Manufacturer: DKIBBITH
See On Amazon #3
5PCS M2 HSS Taper Chucking Reamer Set,3/8",1/2",5/8",3/4",1 Reamer Fit 1/2" Round Shank,Bridge/Construction Reamer Drill Bit for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole Reamer
Asin: B0CWRLL4BP | Model: BR-010 | PartNumber: BR-010
Makes Reaming Holes Out Extremely Easier Than Using Large Drill Bits,The Reamed Hole Is Smooth Without Tear-Outs. But There Must Be An Existing Hole Or Pilot Hole With A Diameter Smaller Than Our Bridge Steel Reamer Bit Before Use.
Commonly Used In Bridge,Construction,Steel Erection And Automotive Truck Trailer Industries,Our Bridge/Construction Reamer Bit For Steel,Metal,Alloy Aluminum,Brass,Plastic,Iron,Nickel,Copper,Cast Iron Etc.Three Symmetrically Placed Flats On Shank Provide Positive Grip In Portable Electric And Pneumatic Tools.
The Tapered Point Design Permits The Tapered Reamer For Metal To Enter Into The Overlapping Holes Of Out-Of-Line,Make The Bolt Holes Line Up.Enlarging The Holes In The Steering Knuckles And Pitman Arm.
The Heavy Duty High-Speed Steel Bridge Reamer Is Also Called Construction Reamers,It Used For Aligning An Existing Hole And Enlarging Undersized Hole Prior To Bolt Or Rivet Installation.Our Taper Reamer Bit Aligns And Enlarges Pre-Drilled Holes Ready For Bolting.
Features
- M2 HSS taper chucking reamer 5pcs set including 3/8",1/2",5/8",3/4" and 1 fit 1/2" shank chuck with 5-Spiral Flute. The bridge construction reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to enlarge a hole, you must first have an existing hole and then use our taper reamer to enlarge it
- The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our taper reamer bit aligns and enlarges pre-drilled holes ready for bolting
- Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be an existing hole or pilot hole with a diameter smaller than our bridge steel reamer bit before use
- The tapered point design permits the tapered reamer for metal to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm
- Commonly used in bridge,construction,steel erection and automotive truck trailer industries,our bridge/construction reamer bit for steel,metal,alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools
- See more on Amazon...
Brand: NOVINO | Manufacturer: NOVINO
See On Amazon #4
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs
Asin: B08ZM5897V | Model: a20102800ux0555 | PartNumber: a20102800ux0555
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm; tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
Accusize Industrial Tools 29 Pc 1/16'' to 1/2'' by 1/64'' H.S.S. Chucking Reamer Set, Straight Flute, Right Hand Cut, 5500-SF00
Asin: B00HQMXL38 | Model: 5500-SF00 | PartNumber: 5500-SF00 | Ean: 0663566007748, 0641799805454 | UPC: 663566007748, 641799805454
Precision-Ground With Decimal Equivalents From 0.0625" To 0.5000", Catering To Tight Tolerance Requirements..
Designed For Use In Lathes, Drill Presses, And Milling Machines, Enhancing Tool Longevity And Machining Accuracy..
Flute Lengths Vary From 1/2" To 2", With Overall Lengths Between 2-1/2" To 8", Providing Versatility Across Operations..
Straight Flute Design And Right-Hand Cut Orientation Ensure Smooth, Precise Cuts And Excellent Surface Finish..
Features
- Comprehensive set of 29 H.S.S. chucking reamers, sizes range from 1/16" to 1/2" by 1/64" increments for diverse applications; straight shank, straight flute, right-hand cut.
- Straight flute design and right-hand cut orientation ensure smooth, precise cuts and excellent surface finish.
- Precision-ground with decimal equivalents from 0.0625 to 0.5000, catering to tight tolerance requirements.
- Flute lengths vary from 1/2 to 2, with overall lengths between 2-1/2 to 8, providing versatility across operations.
- Designed for use in lathes, drill presses, and milling machines, enhancing tool longevity and machining accuracy.
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 12.20 x 3.54 x 9.45 inches | Weight: 2.45 Kilograms
See On Amazon #6
uxcell 1/8" 3/16" 1/4" 5/16" Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool Reamer Set for Bore Machining 4pcs
Asin: B09C8M58TC | Model: a20103000ux0036 | PartNumber: a20103000ux0036
Wide Applications: Sharp Blade For Easy Cutting And High Efficiency. Used For Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, Alloy, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Used On Screw Machines, Turret Lathes, Drilling And Milling Machines. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of High-Speed Steel, The Reamers Have Combination Of Hardness And Toughness For Wear Resistance. The Cutter Body Is Sturdy And Damage-Resistant, With Strong Heat Resistance That Stable Processing. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: Cutting diameter: 1/8", 3/16", 1/4", 5/16"; accuracy class: H7. The hand reamers ream the cylindrical shape. Good for general purpose applications. Straight round shank provides a stable holding and can be used with a variety of tool holding systems.
- Material and Coating: Made of high-speed steel, the reamers have combination of hardness and toughness for wear resistance. The cutter body is sturdy and damage-resistant, with strong heat resistance that stable processing. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Sharp blade for easy cutting and high efficiency. Used for processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, alloy, and other soft materials.
- Easy to Use: Can be used on screw machines, turret lathes, drilling and milling machines. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #7
uxcell MT2 Morse Taper Reamer H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Finish Hand Reamer Cutter Milling Tool Conical reamer for Bore Machining
Asin: B091KBFR4Q | Model: a20103000ux0072 | PartNumber: a20103000ux0072
Wide Applications: Used For Processing, Handicraft Processing, And Bore Machining. Can Be Used To Repair Drilled Holes And Improve Hole Accuracy. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Hand Operated By Use Of Wrenches. The Blade Is Sharp And Fine, And The Cutting Efficiency Is High. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of Alloy Tool Steel, The Reamers Have High Hardness And Durability, Not Easy To Wear And Can Be Used For A Long Time. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: Taper size: MT2; cutting diameter (Max.): 18mm / 0.71"; cutting diameter (Min.): 15mm / 0.59"; accuracy class: H8. The Morse Taper reamers ream the Morse Taper shape, and provide finish cuts.
- Material and Coating: Made of alloy tool steel, the reamers have high hardness and durability, not easy to wear and can be used for a long time. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Used for processing, handicraft processing, and bore machining. Can be used to repair drilled holes and improve hole accuracy. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
- Easy to Use: Can be hand operated by use of wrenches. The blade is sharp and fine, and the cutting efficiency is high. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #8
Accusize Industrial Tools 1'' H.S.S. M2 Straight Shank Straight Flute Chucking Reamer, Flute Length 2-3/4'', Oal 10-1/2'', 8 Flute, 5015-0285
Asin: B00U6JYQA0 | Model: 5015-0285 | PartNumber: 5015-0285 | Ean: 0641799805263 | UPC: 641799805263
Above 1/4" To 1": +0.0001" To +0.0005" - 0.0000".
Measurements Include A Flute Length Of 2-3/4" And An Overall Length Of 10-1/2", Suited For Diverse Machining Tasks..
Offers A 1" Diameter (Dec. Dia.: 1.0000") With Precise Tolerance Of +0.0001" To +0.0005", Ideal For Precision Machining..
Equipped With 8 Straight Flutes For Superior Chip Evacuation And A Smooth Finish, Enhancing Overall Machining Quality..
Straight Flute Design. Bright Finished..
Crafted From Premium M2 High-Speed Steel For Exceptional Durability And Sharpness Across A Variety Of Materials..
Above 1" To 1-1/2": +0.0002" To +0.0006" - 0.0000".
Features Standard 45° Chamfered Cutting Edges For Effective Cutting, Deburring, And Finishing Operations..
Thru 1/4" Diameter: +0.0001" To +0.0004" - 0.0000".
Features
- Straight Shank, Straight Flute, Right-hand Cut
- Thru 1/4 diameter: +0.0001 to +0.0004 - 0.0000
- Above 1/4 to 1: +0.0001 to +0.0005 - 0.0000
- Above 1 to 1-1/2: +0.0002 to +0.0006 - 0.0000
- Straight flute design. Bright finished.
- Crafted from premium M2 high-speed steel for exceptional durability and sharpness across a variety of materials.
- Offers a 1 diameter (Dec. Dia.: 1.0000) with precise tolerance of +0.0001 to +0.0005, ideal for precision machining.
- Equipped with 8 straight flutes for superior chip evacuation and a smooth finish, enhancing overall machining quality.
- Features standard 45 chamfered cutting edges for effective cutting, deburring, and finishing operations.
- Measurements include a flute length of 2-3/4 and an overall length of 10-1/2, suited for diverse machining tasks.
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 11.02 x 1.18 x 1.18 inches | Weight: 1.55 Kilograms
See On Amazon #9
Lichamp 4 Piece Reamers Set for Metal, Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers
Asin: B0B5HW8N41 | Model: TRS-A10400 | PartNumber: TRS-A10400
Wide Applications - Works Well In Free Cutting And Carbon Steels, As Well As Soft, Non-Ferrous Materials Such As Aluminum, Brass And Copper..
Safe Straight Shank - Round Shank With 3 Flats To Prevent Slipping In The Drill Chuck, Safety Flange/ Stop Collar To Prevent The Reamer Running Through The Hole..
Five Grooves Fast Drilling - Reversed Spiral Push Chips Forward And Are Ideal For Through-Hole Applications, Reduces The Friction, Runs Cooler, Performs Well In Heat, Corrosion And Rust Resistance..
M2 High Speed Steel - Hss M2 Ensures Sharp And Fast Execution In Most Hard Steel Material For Clean Results, While Provides Good Wear Resistance In Mild Steels And Non-Ferrous Materials..
Features
- Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles.
- M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials.
- Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper.
- Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance.
- Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole.
- See more on Amazon...
Brand: Lichamp | Manufacturer: Lichamp
Dimensions: 2.17 x 8.46 x 5.91 inches | Weight: 1.76 Pounds
See On Amazon #10
Jerax tools 4pcs Bridge/Construction Reamer Set, 3/8", 1/2", 5/8", 3/4 , M2 HSS Taper Chucking Reamer Drill Bit for Steel Alloy Aluminum Metal Wood Plastic, 3/8" or 1/2" Shank, to Enlarge/Align Holes
Asin: B09CTDQ8BN
[Tapered Point]: Allow Entry Into Overlapping Holes..
[Sizes]: 4 Pieces, Including 3/8" (Fit 3/8'' Shank Chuck), 1/2", 5/8" And 3/4" (Fit 1/2'' Shank Chuck)..
[Application]: Enlarge Or Align Existing Holes Through Mild Steel, Alloys, Aluminum, Wood, Plastic, Fiberglass Or Any Similar Hardness Material Prior To Rivet Or Bolt Installation. Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
[Spiral Flutes & Safety Stop]: Left Helix/Right Hand Cut Sheers Chips Away From Operator. Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Features
- [M2 HSS material]: Compared to other commonly used lower grade HSS, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability.
- [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability.
- [Tapered point]: allow entry into overlapping holes.
- [Application]: enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- [Sizes]: 4 pieces, including 3/8 (fit 3/8'' shank chuck), 1/2, 5/8 and 3/4 (fit 1/2'' shank chuck).
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
Weight: 1.00 Pounds
See On Amazon #11
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 8pcs
Asin: B08ZM5NTWB | Model: a20102800ux0551 | PartNumber: a20102800ux0551
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm; tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs
Asin: B08ZM5TN75 | Model: a20102800ux0553 | PartNumber: a20102800ux0553
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
8pcs Reamer Set, HSS H8 Straight Shank Chucking Machine Cutter Milling Reamer Kit 3/4/5/6/7/8/9/10mm
Asin: B08693VD5L | Model: zhibingjiaodao | PartNumber: zhibingjiaodao | Ean: 0768894830515 | UPC: 768894830515
⭐This Hss H8 Reamer Set Can Process Surface Of Iron, Steel, Plastic, Wood, Copper, Aluminum And Other Metal Materials..
⭐Shank Diameter: 3/4/5/6/7/8/9/10Mm..
⭐The Straight Shank Milling Cutter Tool Set Are Widely Used For Bore Machining, Reaming To Mould Processing And Handicraft Processing, Installed In Drilling Machine, Milling Machine, Etc.
⭐With Sharp Cutting-Edge, The Chucking Machine Reamer Set Have High Cutting Ability, High Accuracy And Clean Cutting..
Features
- The reamer set are made of high speed steel, high hardness and good toughness, long service life.
- With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting.
- This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials.
- The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc
- Shank Diameter: 3/4/5/6/7/8/9/10mm.
- See more on Amazon...
Brand: Together-life | Manufacturer: Together-life
Weight: 0.22 pounds
See On Amazon #14
uxcell 2mm Chucking Reamer, Tungsten Carbide Lathe Machine Reamer H7 4 Straight Flutes, 100mm Length Round Shank Milling Cutting Tool, for Stainless Steel Alloy Copper Metal
Asin: B08F9HR8JL | Model: a19120900ux0927 | PartNumber: a19120900ux0927
Round Shank: Can Be Used With A Wide Variety Of Tool Holding Systems. Good For Use In Through Or Blind Holes And Used For Light Cut, Repair Work, Removing Stock.
Application: Designed For Accurate Reaming In Stainless Steel, Alloy Steel And Other Metal Materials, Used On Equipment Including Screw Machines, Turret Lathes, Drill Presses And Machining Centers.
Features: Straight Flute Tool Allows Chips To Collect In The Flutes When Cutting, Well Suited For Applications In Shallow Cuts. Tungsten Carbide Reamer Is With High Hardness And Strong Wear Resistance For Long Service Life.
Uncoated Tool: Features Just The Base Substrate Without Any Additional Treatment Or Coatings. Heat Treated And Quenched For Stable Performance, Suitable For Wide Ranges Of Applications.
Features
- Specifications: Cutting dia.: 2mm / 0.08"; tool flute length: 50mm / 2.0"; overall length: 100mm / 4.0"; accuracy: H7. Tungsten carbide tool is hardened to 50HRC, good for general purpose applications
- Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications
- Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock
- Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for applications in shallow cuts. Tungsten carbide reamer is with high hardness and strong wear resistance for long service life
- Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
Homaisson 4 PCS Taper Reamers, 3/8", 1/2", 5/8", 3/4" M2 HSS Chucking Reamers, Taper Bridge Reamer with 5 Spiral Flutes, Bridge Steel Reamers to Align Existing Hole and Enlarge Hole
Asin: B0C5CHX9RJ | Model: 92104M6JB1 | PartNumber: 92104M6JB1 | Ean: 0752870900972 | UPC: 752870900972
【Enhanced Efficiency With Spiral Flutes】The 5 Left Spiral Flutes Propel Chips Forward, Reducing Friction And Operating Temperature. They Elevate Heat Resistance, Corrosion Resistance, And Rust Prevention. While Keeping Chips Away From The Operator, Ensuring Cleaner And Safer Operations..
【Widely Used Across Various Materials】Suitable For Low-Carbon Steel, Alloys, Aluminum, Wood, Plastics, And Fiberglass, Making This Reamer Set A Staple In Bridge Construction, Steel Manufacturing, Automotive (Trucks And Trailers), And More. Note: Prior To Reaming, Ensure The Presence Of An Existing Hole Or A Pilot Hole Smaller Than The Reamer's Size..
【Secure And Safe Shank Design】Each Shank Features Three Symmetrically Placed Flats, Ensuring A Secure Grip When Used With Portable Electric And Pneumatic Tools. Additionally, The Shank's Top Boasts A Safety Collar Stop That Prevents Over-Penetration And Safeguards Operator Stability, Providing Peace Of Mind During Operation..
【Premium M2 Hss For Efficient Work】Crafted From Hss6542/M2 High-Speed Steel, Enriched With 50% More Tungsten And 150% More Molybdenum Compared To Standard Grades. Boasting A Hardness Of 63-65Hrc, These Reamers Exhibit Exceptional Durability, Ensuring Sharpness And Swift Cutting Action..
Features
- 4 Tapered Reamers Made Precise Holes Set of 4 taper reamers with sizes 3/8", 1/2", 5/8", and 3/4", catering to various machining needs. The tapered point design allows them to effortlessly enter into the out-of-line overlapping holes and line them up, or enlarge the holes in the steering knuckles and pitman arms, ensuring a smooth installation of bolts or rivets.
- Premium M2 HSS for Efficient Work Crafted from HSS6542/M2 high-speed steel, enriched with 50% more tungsten and 150% more molybdenum compared to standard grades. Boasting a hardness of 63-65HRC, these reamers exhibit exceptional durability, ensuring sharpness and swift cutting action.
- Enhanced Efficiency with Spiral Flutes The 5 left spiral flutes propel chips forward, reducing friction and operating temperature. They elevate heat resistance, corrosion resistance, and rust prevention. while keeping chips away from the operator, ensuring cleaner and safer operations.
- Secure and Safe Shank Design Each shank features three symmetrically placed flats, ensuring a secure grip when used with portable electric and pneumatic tools. Additionally, the shank's top boasts a safety collar stop that prevents over-penetration and safeguards operator stability, providing peace of mind during operation.
- Widely Used Across Various Materials Suitable for low-carbon steel, alloys, aluminum, wood, plastics, and fiberglass, making this reamer set a staple in bridge construction, steel manufacturing, automotive (trucks and trailers), and more. Note: Prior to reaming, ensure the presence of an existing hole or a pilot hole smaller than the reamer's size.
- See more on Amazon...
Brand: Homaisson | Manufacturer: Homaisson
Weight: 0.57 pounds
See On Amazon #16
Drill America DWRRTPS2/0 #2/0 High Speed Steel Spiral Flute Taper Pin Reamer, DWR Series
Asin: B00FXJO752 | Model: DWRRTPS2/0 | PartNumber: DWRRTPS2/0 | Ean: 0887861148207 | UPC: 887861148207
Available In Round Shank With Square End.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Available in round shank with square end
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #17
1" Drill Bridge/Construction Reamer Bit with 1/2" Non-Slip Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Wood Alloy Drilling Hole
Asin: B0D1BYY5QF
Design: Tapered Point Design Allows Reamer Bits To Enter Irregular Overlapping Holes, Aligning Bolt Holes..
Material: Made Of High-Quality Steel, High Toughness, High Temperature Resistance, Corrosion Resistance, Long Service Life..
Note: The 1" Bridge Reamer Bit Is Not A Drill Bit, Only Aligns The Reamer With The Pre-Drilled Hole. If You Need To Enlarge The Hole To 1" . Must Have A Pre-Drilled First, Then Reamed To 1"..
Application: Especially For Steel, Metal, Alloy Aluminum, Brass, Plastic, Iron, Nickel, Copper, Cast Iron And Other Structural Materials..
Features
- What it does: Heavy-duty high-speed steel bridge reamers,expand or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass, or any material of similar hardness prior to rivet or bolt installation, Deburring and trimming of holes in structural materials.
- Application: Especially for steel, metal, alloy aluminum, brass, plastic, iron, nickel, copper, cast iron and other structural materials.
- Design: Tapered point design allows reamer bits to enter irregular overlapping holes, aligning bolt holes.
- Note: The 1 Bridge Reamer Bit is not a drill bit, only aligns the reamer with the pre-drilled hole. If you need to enlarge the hole to 1 . Must have a pre-drilled first, then reamed to 1.
- Material: Made of high-quality steel, high toughness, high temperature resistance, corrosion resistance, long service life.
- See more on Amazon...
Brand: SZRKRLA | Manufacturer: SZRKRLA
See On Amazon #18
10Pcs Machine Reamer Set,HSS H7 Straight Flute Chucking Reamer Milling Cutter 3/4/5/6/7/8/9/10/11/12mm
Asin: B07B8LQVV9 | Ean: 0654936098688 | UPC: 654936098688
【Wide Application】： The Reamer Tool Is Widely Used For Bore Machining, Installed In Drilling Machine, Milling Machine, Etc.
【Quantity- 10 Pieces】： Shank Diameter-3Mm,4Mm,5Mm,6Mm,7Mm,8Mm,9Mm,10Mm,11Mm,12Mm.
【Application Material Kind】：Processed Surface Of Iron, Plastic, Wood, Copper, Aluminum And Other Soft Materials.
【Type】- Straight Flute Chucking Reamer Bits.
Features
- Making Material of Machine Reamer Material- HSS(H7 High Speed Steel)
- Type - Straight Flute Chucking Reamer Bits
- Wide Application The reamer tool is widely used for bore machining, installed in drilling machine, milling machine, etc
- Application Material Kind Processed surface of iron, plastic, wood, copper, aluminum and other soft materials
- Quantity- 10 Pieces Shank Diameter-3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.84 pounds
See On Amazon #19
2Pcs High Carbon Steel Straight Shank Morse Taper Reamer Rough + Fine Hand Reamer Set Replacement(MT2#)
Asin: B0868TN7D5 | Model: WALFRONT8id2m613wq-12 | PartNumber: WALFRONT8id2m613wq-12
Application-- Available In A Variety Of Models To Meet Most Daily Work Needs. A Perfect Replacement For The Broken Or Worn One..
5 Optional Madel-- Optional Model: Mt1#, Mt2#, Mt3#, Mt4#, Mt5#, Meet Your Different Requirements.
Good Performance-- Morse Taper Reamer Features Fine Workmanship, High Precision, High Cutting Efficiency..
2Pcs-- Each Set Of Two Reamers, One Rough And One Fine, Meets Different Work Requirements..
Features
- HIGH QUALITY-- Morse Taper Reamer is made of high carbon steel, it is not easy to wear and has a long service life.
- 2PCS-- Each set of two reamers, one rough and one fine, meets different work requirements.
- APPLICATION-- Available in a variety of models to meet most daily work needs. A perfect replacement for the broken or worn one.
- GOOD PERFORMANCE-- Morse Taper Reamer features fine workmanship, high precision, high cutting efficiency.
- 5 OPTIONAL MADEL-- Optional Model: MT1#, MT2#, MT3#, MT4#, MT5#, meet your different requirements
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.44 pounds
See On Amazon #20
Saipe 5/8" Spiral Flute Reamer with 1/2 inch Shank, M2 HSS Bridge/Construction Reamer Taper Chucking Reamer Drill Bit Car/Maintenance Reamer for Steel, Alloy, Aluminum, Copper, Plastic
Asin: B0BKFY973Q | Model: 5/8" Spiral Flute Reamer | PartNumber: 5/8" Spiral Flute Reamer
【3-Flat Design】Three Symmetrically Placed Flats On The Shank Provide Positive Grip In Portable Power And Air Tools. The Short Length Is Convenient For Use In Areas With Limited Access..
【Taper Chucking Reamer】The Reamer Is Widely Used In Bridge, Construction, Steel Erection / Fabrication, And Automotive (Truck & Trailer) Industries. Notice: It Requires An Existing Hole Or A Pilot Hole!.
【Widely Used】Bridge/Construction Reamers Are Used To Align Existing Holes Before Installing Bolts Or Rivets. Suitable For Use In A Wide Range Of Materials Such As Aluminum, Brass, Cast Iron, Copper, Iron, Metal, Plastic, Steel, Etc..
【Tapered Point & Spiral Flutes & Safety Stop】Tapered Design Allow Entry Into Overlapping Holes; Spiral Flutes Can Discharge The Chips Easily; Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Features
- Bridge Reamer The package contains a 5/8 inch reamer with 1/2 inch shank. Made of high quality M2 HSS 6542 for high hardness and durability.
- Tapered Point & Spiral Flutes & Safety Stop Tapered design allow entry into overlapping holes; Spiral Flutes can discharge the chips easily; Safety collar stop to prevent over penetration and operator loss of stability.
- 3-Flat Design Three symmetrically placed flats on the shank provide positive grip in portable power and air tools. The short length is convenient for use in areas with limited access.
- Widely Used Bridge/Construction reamers are used to align existing holes before installing bolts or rivets. Suitable for use in a wide range of materials such as Aluminum, Brass, Cast Iron, Copper, Iron, Metal, Plastic, Steel, etc.
- Taper Chucking Reamer The reamer is widely used in bridge, construction, steel erection / fabrication, and automotive (truck & trailer) industries. Notice: It requires an existing hole or a pilot hole!
- See more on Amazon...
Brand: Saipe | Manufacturer: Saipe
See On Amazon
Looking For Something Else?
Search