3D Printer Bed Special Tempered Glass 3D Printer Build Sheet with Microporous Coating Reusable 3D Printer Accessories Compatible for PLA, TPU, ABS, Heat-Resistant Temperature(400 )
Asin: B0CWLMSZ87
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Broad Compatibility: Compatible With A Wide Range Of Materials Including Pla, Tpu, Abs, Pc, Nylon, Pp, And Petg, This 3D Printer Build Surface Is Versatile And Adaptable To Various Printing Needs..
Easy Maintenance: The Build Surface Of This 3D Printer Accessory Is Equipped With A Thin Protection Layer, Allowing For Effortless Cleaning With Water Or Alcohol, Leaving No Marks..
Simplified Mold Removal: After Printing, The Flexible Build Plate Can Be Conveniently Cooled For Easy Hand Removal Of The Printed Mold Without The Necessity Of Additional Tools..
Heat Resistant: Constructed With A Special Inorganic Coating Boasting A Hardness Of 8 Mohs And A Remarkable Heat Resistance Of Up To 400℃, This 3D Printer Build Plate Can Be Repeatedly Used Without Compromising Performance..
Features
- Microporous Coating: The 3D Printer Glass Platform features a surface covered with microporous coating, providing strong adhesion for printing without the need for masking paper or solid glue.
- Heat Resistant: Constructed with a special inorganic coating boasting a hardness of 8 Mohs and a remarkable heat resistance of up to 400 , this 3D Printer Build Plate can be repeatedly used without compromising performance.
- Broad Compatibility: Compatible with a wide range of materials including PLA, TPU, ABS, PC, Nylon, PP, and PETG, this 3D Printer Build Surface is versatile and adaptable to various printing needs.
- Simplified Mold Removal: After printing, the flexible build plate can be conveniently cooled for easy hand removal of the printed mold without the necessity of additional tools.
- Easy Maintenance: The build surface of this 3D Printer Accessory is equipped with a thin protection layer, allowing for effortless cleaning with water or alcohol, leaving no marks.
- See more on Amazon...
Brand: ZLXHDL | Manufacturer: ZLXHDL
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.43 Pounds
See On Amazon Similar To 3D Printer Bed Special Tempered
#1
Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 3D Printer 235X235MM
Asin: B07X3WBNPX
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Simple Installation & Universal: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
All New Functionality: Introducing The First Ever Removable, Magnetically Secured, Build Surface For Hassle Free Model Removal.It Is Recommended To Heat The Hot Bed For 2-3 Minutes Before Removing The Model With The Removal Tools..
Features
- ATTENTION BEFORE USE Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.20 x 9.25 x 9.25 inches | Weight: 0.66 pounds
See On Amazon #2
Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm
Asin: B07RD6D2ZQ | Model: Dawnblade190503 | PartNumber: Dawnblade190503 | Ean: 0745679683719 | UPC: 745679683719
Excellent Flatness - Improved 3D Printer Glass Plate Provides More Flat And More Smooth Build Surface Than Magnetic Mat Or Pei Sticker, Ensuring High Flatness For The Bottom Of Model..
Compatibility - The 3D Printer Parts Is Applicable With Creality 3D Printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro And Cr-20, Cr-20 Pro, Pls Confirm If This Borosilicate Glass Bed Compatible With Your Printer..
Super Convenient - Very Easy To Take Off The Model, No Tools Needed. This Borosilicate Glass Bed Could Be Fixed With Middle Sized Clips And Cleaned With Alcohol Or Acetone At Room Temperature..
No-Indentation Printing - Upgraded Ender 3 Glass Plate Has A Much Smaller Creality Logo Than Older Version, Avoiding Leaving Logo Indentations On Molds Surface During 3D Printing..
Features
- No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts.
- No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing.
- Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
- Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.
- Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer.
- See more on Amazon...
Brand: Dawnblade | Manufacturer: Dawnblade
Dimensions: 0.16 x 9.25 x 9.25 inches
See On Amazon #3
Creality Official Ender 3 Glass Bed Upgraded, High Hardness Durable Glass Platform for 3D Printer, Tempered Glass Build Plate for Ender 3 Pro, Ender 5, Ender 5 Pro, Ender 3 V2, 235x235 4mm
Asin: B08XXVWN11 | Model: 6004010007 | PartNumber: 6004010007 | Ean: 0633690247198 | UPC: 633690247198
0.15Mm Of Flatness Recovery Model: This Is The Combination Of Glass And Composite. Due To The Flatness Of Glass And The Uniform Composite Coating Of Surface 'Lattice', The Platform Has Excellent Flatness..
High Hardness And Durable: This Is The Combination Of Chemically Tempered Glass And Surface Composite Coating. The Flatness Of Glass Will Be Much Better And The Composite Coating Of Surface 'Lattice' Will Be Uniform, Which Makes The Platform Have Excellent Flatness..
Wear-Resistant And Scratch-Resistant, Easy To Clean: There Is A Protective Film On The Surface Of The Composite Coating, Which Is Of Anti-Scratch And Dustproof, Etc..
High Viscosity And Strong Adhesion: Composite Nano Molecule Coating Has High Viscosity After Heating, Which Makes The Model Have Strong Adhesion..
Features
- Easy to Remove Model within 1 Minute: The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.
- High Viscosity and Strong Adhesion: Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.
- 0.15MM of Flatness Recovery Model: This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.
- Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- High Hardness and Durable: This is the combination of chemically tempered glass and surface composite coating. The flatness of glass will be much better and the composite coating of surface 'lattice' will be uniform, which makes the platform have excellent flatness.
- See more on Amazon...
First Available: 03/30/2023
Brand: UNIDO | Manufacturer: Unido
Dimensions: 0.16 x 9.25 x 9.25 inches
Warranty: 2 year manufacturer
See On Amazon #4
Mefine Creality Ender 3 Glass Bed Upgraded 3D Printer Tempered Glass Plate Build Surface for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1, 235x235x4mm
Asin: B08CXLLCH4 | Model: Ender3GLB | PartNumber: Ender3GLB | Ean: 0778992842808 | UPC: 778992842808
Easy To Remove: It Is Very Easy To Remove The Prints. The Surface Of Our Tempered Glass Bed Is A Layer Of The Microporous Composite Coating. It Will Contract As The Hot Bed Cooling Which Greatly Ensures The Prints Can Be Removed Manually Without Any Tools..
High-Grade Material: Made Of 100% Genuine Borosilicate Glass, Thick And High Quality. The Glass Bed's Hardness Is Up To 8 Mohs And Is Capable To Work Up To 400 ℃. Wipe Clean With Water To Start The Next Print. Scrubbing The Glass Platform With Alcohol Is Not Recommended, It Can Damage The Surface Coating Which Increases Adhesion. We Offer A 90-Day Free Replacement, Any Problems, Feel Free To Get In Touch With Us..
Excellent Flatness: Upgraded Ender 3 Build Plate With Smaller Creality Logo Provides A Flatter And Smoother Build Surface Than A Magnetic Mat Or Pei Sticker, Ensuring High Flatness For The Bottom Of Mold During 3D Printing..
No Edge Curling: The Composite Coating Of Our Tempered Glass Bed Has Super Strong Adhesion After Heating, Prints Can Be Stuck On The Build Surface Firmly Without Glue, Avoiding The Issue Of The Print's Edges Curling. Equipped With 4 Clips To Fix The Hotbed..
Features
- Compatibility: Officially authorized Creality glass bed, applicable for Creality 3D printers Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Neo, Ender 3 V2 Neo, Ender-5, CR-20, CR-20 Pro, other 3D printers with a print area of 220*220mm(note for Ender 5 S1) and most of the Cartesian style 3D printers with an MK2 MK3 hotbed. Please make sure the printing size of your printer's platform is compatible. and to be compatible with Ender-3 S1/Ender-3 S1 Pro, please remove the two positioning screws on the hotbed first.
- No Edge Curling: The composite coating of our tempered glass bed has super strong adhesion after heating, prints can be stuck on the build surface firmly without glue, avoiding the issue of the print's edges curling. Equipped with 4 clips to fix the hotbed.
- Easy to Remove: It is very easy to remove the prints. The surface of our tempered glass bed is a layer of the microporous composite coating. It will contract as the hot bed cooling which greatly ensures the prints can be removed manually without any tools.
- Excellent Flatness: Upgraded ender 3 build plate with smaller CREALITY logo provides a flatter and smoother build surface than a magnetic mat or PEI sticker, ensuring high flatness for the bottom of mold during 3D printing.
- High-Grade Material: Made of 100% Genuine Borosilicate Glass, thick and high quality. The glass bed's hardness is up to 8 Mohs and is capable to work up to 400 . Wipe clean with water to start the next print. Scrubbing the glass platform with alcohol is not recommended, it can damage the surface coating which increases adhesion. We offer a 90-day free replacement, any problems, feel free to get in touch with us.
- See more on Amazon...
Brand: Mefine | Manufacturer: Mefine
See On Amazon #5
3PCS Creality Original Heat Bed Platform Sticker Sheet, Hot Bed Build Surface Tape 235x235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/5
Asin: B07FQWTZ3Y | Ean: 0649910300666 | UPC: 649910300666
Compatible With Abs, Pla, Hips, And Another Filament. Works With All Fdm Printer Models..
Durable Construction Allows For Multiple Uses With Either The Same Or Different Filament Materials..
Single Sheet Design Installs More Quickly And With Fewer Bubbles Than Tape Or Films..
Build Sheet Adheres To The Hot Bed To Help The Filament Stuck During Printing, While Also Helping Remove The Printed Model Afterward..
Features
- Size: 235mm x 235mm.
- Build sheet adheres to the hot bed to help the filament stuck during printing, while also helping remove the printed model afterward.
- Compatible with ABS, PLA, HIPS, and another filament. Works with all FDM printer models.
- Single sheet design installs more quickly and with fewer bubbles than tape or films.
- Durable construction allows for multiple uses with either the same or different filament materials.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.30 x 9.25 x 9.25 inches
See On Amazon #6
Comgrow 2PCS Ender 3 Pro Glass Bed, Upgraded Tempered Glass Plate with Bed Clips, Ender 3 Build Plate 235x235x4mm for Creality Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/3 S1/3 S1 Pro/5 Pro
Asin: B07DS2LZF1 | Ean: 0649910290714 | UPC: 649910290714
Extra Glass Clips - Use Clips To Fix The Ender 3 Pro Bed On The Hot Bed. Easy Model Removal - The Ender 3 Build Plate Is Designed With Model Removal In Mind. Very Easy To Take Off The Models; No Tools Are Needed When Removing Models..
Wide Compatibility - The 3D Printer Glass Bed Is Fit For Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3S/Ender 3 Neo, Ender 5/Ender 5S/Cr-20/Cr-20 Pro. (Perfect For 3D Printer With A Printing Area Of 220*220Mm.) Please Confirm Whether This Ender 3 Pro Bed Mat Is Compatible With Your 3D Printer Before Buying..
Easy Model Removal - The Ender 3 Glass Bed Is Designed With Model Removal In Mind. Very Easy To Take Off The Models; No Tools Are Needed When Removing Models..
Long Durability - Inorganic Coating, High Hardness Of 8 Mohs, Avoiding The Deformation Of The Ordinary Aluminum Heat Bed After Long-Term Use.Undiminished Performance After Repeated Use, No Need For Frequent Replacement..
Features
- NO EDGE CURLING - Ender 3 pro glass bed with the composite coating. The models will stick on the Ender 3 v2 bed firmly without glue, avoiding the issue of the print's edges curling. The 3d printer bed is equipped with 4 clips to fix the hotbed.
- LONG DURABILITY - Inorganic coating, high hardness of 8 Mohs, avoiding the deformation of the ordinary aluminum heat bed after long-term use.Undiminished performance after repeated use, no need for frequent replacement.
- EXTRA GLASS CLIPS - Use clips to fix the Ender 3 pro bed on the hot bed. EASY MODEL REMOVAL - The Ender 3 build plate is designed with model removal in mind. Very easy to take off the models; No tools are needed when removing models.
- EASY MODEL REMOVAL - The ender 3 glass bed is designed with model removal in mind. Very easy to take off the models; No tools are needed when removing models.
- WIDE COMPATIBILITY - The 3d printer glass bed is fit for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3S/Ender 3 Neo, Ender 5/Ender 5S/CR-20/CR-20 Pro. (Perfect for 3D Printer with a printing area of 220*220mm.) Please confirm whether this Ender 3 pro bed mat is compatible with your 3D Printer before buying.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #7
PEI Sheet Double-Sided Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 V2-Pro-S1/Ender 5-Pro/Ender 3 V3 SE-KE 3D Printer, Ender 3/5 Series Bed Upgraded 235mm x 235mm
Asin: B0C4QBC1ZR | Model: PEI-0509 | PartNumber: PEI-0509 | Ean: 0795847035284 | UPC: 795847035284
Excellent Adhesion: Our Pei Sheet Provides Excellent Adhesion For Your Prints, Allowing Them To Stick Securely To The Printing Surface While Still Being Easy To Remove. You Can Print Directly Onto Each Side Of The Double-Sided Sheet Without Glue Or Any Other Adhesives..
Simple Installation: This 3D Printer Bed Is Easy To Install. Simply Stick The Magnetic Bottom Sheet Onto Your Chosen Build Plate, And Then Place The Steel Platform With Pei Surface On Top. Easily Replace An Ender 3 Glass Bed, Or Any Other Type Of Platform. The Pei Sheet Is Flexible, Removable And Sticks To Magnetics Very Well..
Great Removal: When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Easy To Remove And Flexible, Allowing Prints To Come Off The Surface Easily When It Reaches Room Temperature. After The Model Printing Is Completed, Just Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface, And Watch The Model Fall Right Into Your Hands..
More Affordable And Practical: This Build Plate Is Made With 75% Thicker Pei And 25% Thicker Spring Steel Than Similar Products On The Market, Providing A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. The Magnet Can Sustain High Temperatures Of Up To 120°C, Making It Wear-Resistant And Scratch-Resistant. Besides, It's Really Easy To Clean With A Protective Film On The Surface Of The Composite Coating, Which Is Anti-Scratch And Dustproof..
Features
- Wide Application: This PEI sheet is 235mm x 235mm, applicable to Ender3, Ender3 Pro, Ender3 V2, Ender3 S1, Ender3 S1 Pro, Ender3 Neo, Ender 3 V2 Neo, Ender5, Ender5 Pro and similarly sized FDM 3D printers. The PEI sheet is also compatible with various build plate types, including the Ender 3 build plate, Ender 3 bed plate, Ender 3 magnetic build plate, PEI build plate, Ender 3 glass build plate, and the Wham Bam flexible build plate, available for printing with PLA, PETG, PEEK, ABS or any other filaments.
- More Affordable and Practical: This build plate is made with 75% thicker PEI and 25% thicker spring steel than similar products on the market, providing a more durable plate that can handle the tough conditions of 24/7 printing. The magnet can sustain high temperatures of up to 120 C, making it wear-resistant and scratch-resistant. Besides, it's really easy to clean with a protective film on the surface of the composite coating, which is anti-scratch and dustproof.
- Excellent Adhesion: Our PEI sheet provides excellent adhesion for your prints, allowing them to stick securely to the printing surface while still being easy to remove. You can print directly onto each side of the double-sided sheet without glue or any other adhesives.
- Great Removal: When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is easy to remove and flexible, allowing prints to come off the surface easily when it reaches room temperature. After the model printing is completed, just remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- Simple Installation: This 3d printer bed is easy to install. Simply stick the magnetic bottom sheet onto your chosen build plate, and then place the steel platform with PEI surface on top. Easily replace an Ender 3 glass bed, or any other type of platform. The PEI sheet is flexible, removable and sticks to magnetics very well.
- See more on Amazon...
First Available: 05/20/2023
Brand: UNIDO | Manufacturer: Unido
See On Amazon #8
Creality Original Ultra-Flexible Removable Magnetic Build Surface Heated Bed Cover for Ender 3 V2 Neo/ pro/ S1/Ender 5 3D Printer 235X235MM
Asin: B07HNWSMXY | Model: Ender 3-Magnetic | PartNumber: Ender 3-Magnetic | Ean: 0667797511685 | UPC: 667797511685
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
Universal: Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Simple Installation: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate..
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Features
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
- UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Creality 3D | Manufacturer: Creality 3D
See On Amazon #9
Creality Original Ender 3 Bed,Ultra-Flexible Removable Magnetic Build Plate, 3D Printer Build Surface for Ender 3 Pro/Ender 3 V2/ Ender 5/ Ender 5 Pro/CR 20/CR 20 Pro, 235X235MM
Asin: B09GM8NGXG | Model: platform001 | PartNumber: platform001
Easy To Install: The Build Surface Consists Of An Upper Magnetic Build Surface And A Lower Magnetic Adhesive Base. Place The Lower 3M Adhesive Surface On Top Of The 3D Printer Build Plate Then You Can Start To Print Your Models..
Note: Before Installation, Please Make Sure The Bottom Of The Soft Magnetic Adhesive Is Firmly Attached To The Upper Layer, If It Cannot Be Attached, Please Rotate 90 Degrees And Try Again Until It Is Fully Attached.Please Don't Use Acetone To Wipe The Thin Layer Left By The Models..
Customizable: This Magnetic Bed Replacement Can Be Easily Cut To Any Size. Suitable For All Fdm Printer Models, As Well As All Heated And Unheated 3D Printer Beds. Suitable Materials: Pla.
Excellent Performance: The Magnetic Bed Is Highly Flexible And Heat Resistant, Up To 70°C Without Demagnetization. The Heating Speed Is Fast And Uniform, Ensuring That The Bottom Of The Finished Model Is Delicate And Not Warped. It Is Durable, Easy To Clean With Alcohol And Can Be Used Repeatedly..
Features
- Easy to Remove the Print: The preferred choice for 3D printer heated beds, just print on the magnetic construction board, remove the upper magnetic surface, carefully bend it, and watch the model fall into your hands. VS. tempered glass, it adheres better and is easier to fix, no more worrying about being broken. VS. carbon-silicon glass, it is more affordable and easier to remove the model.
- Excellent Performance: The magnetic bed is highly flexible and heat resistant, up to 70 C without demagnetization. The heating speed is fast and uniform, ensuring that the bottom of the finished model is delicate and not warped. It is durable, easy to clean with alcohol and can be used repeatedly.
- Easy to Install: The build surface consists of an upper magnetic build surface and a lower magnetic adhesive base. Place the lower 3M adhesive surface on top of the 3D Printer build plate then you can start to print your models.
- Customizable: This magnetic bed replacement can be easily cut to any size. Suitable for all FDM printer models, as well as all heated and unheated 3D printer beds. Suitable materials: PLA
- Note: Before installation, please make sure the bottom of the soft magnetic adhesive is firmly attached to the upper layer, if it cannot be attached, please rotate 90 degrees and try again until it is fully attached.Please don't use acetone to wipe the thin layer left by the models.
- See more on Amazon...
Brand: Mefine | Manufacturer: Creality
Weight: 0.79 Pounds
See On Amazon #10
Original Ender 3 Pro Bed Clips Clamp 7mm for Creality Ender 3 V2 Ender 3S Ender 5 Pro Ender 7 CR-20 PRO CR-10S Pro 3D Printer Heated Bed Glass Bed Platform (Bed Clips)
Asin: B08PZKGJTR | Model: ender 3 | PartNumber: ender 3 | Ean: 0791548327208 | UPC: 791548327208
It Is Compatible With Creality Ender 3 Pro Ender 3 V2 Ender 3S Ender 5 Pro Cr-20 Pro 3D Printer And Other 3D Printers Whch Bed Platform Total Thickness Is 7Mm..
Note: This Clips Are Only Used For 7Mm Thickness Platform (Normally 3Mm Thickess Alu Bed And 4Mm Glass Bed), If Your Whole Platform Is Over 7Mm Thickness, Please Do Not Order.
Made From Special Stainless Steel Material. It Is Used For 7Mmm Thickess Bed Platform (Normally 3Mm Thickess Alu Bed And 4Mm Glass Bed)..
Features
- Package: 4pieces clamps
- Made from Special Stainless steel material. it is used for 7mmm thickess bed platform (normally 3mm thickess alu bed and 4mm glass bed).
- It is compatible with Creality Ender 3 pro Ender 3 V2 Ender 3S Ender 5 Pro CR-20 PRO 3D Printer and other 3D printers whch bed platform total thickness is 7mm.
- Note: This clips are only used for 7mm thickness platform (normally 3mm thickess alu bed and 4mm glass bed), if your whole platform is over 7mm thickness, please do not order
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
Weight: 0.01 Pounds
See On Amazon #11
Creality 3D Printer Enclosure Fireproof and Dustproof 3D Printer Warm Enclosure Mini 3D Printer Tent for Ender 3/Ender 3 pro/Ender 3 V2/Ender 5 Pro, Constant Temperature Protective Cover Room
Asin: B0C6TB393R | Model: Creality Enclosure Small | PartNumber: Creality Enclosure Small
🤗 Safe To Use - The Interior Uses Pure Aluminum Film And Flame Retardant Appearance Material. Technically, If In A Fire, It Will Melt And Not Fire Itself Of The Enclosure And Will Not Spread As Well. Equipped With A Selection Of Iron Pipes, Stable Structure, And Abundant Space Can Help You To Achieve Maximum Peace Of Mind Printing..
🤗 Extensive Functionality - Dustproof And Good Noise Reduction. Our 3D Printer Tent Can Reduce Noise To A Certain Extent When Printing, It Can Be Used As A Storage Tool To Provide A Dust-Proof And Clean Environment For Printers, Filaments, And Accessories..
🤗 Quick And Easy Installation - Folding Storage, Easy To Carry. Multi-Faceted Observation, Reserved Tool Pockets. Economical 3D Printing Room. There Are Zippers On The Front And Top Of The Tent, Providing You With The Greatest Convenience..
🤗 Wide Compatibility - Compatible With Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3S/Ender 5 Pro.A Good Mate For Your 3D Printing. Inner Size: 17.5*22.2*26.9 Inch..
Features
- Constant Temperature - Creality 3D Printer Tent Keep a constant temperature printing environment, reducing the bad impact on printed models when low-temperature weather, helps filaments with bed adhesion at high temperatures, improving printing stability.
- Wide Compatibility - Compatible with Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3S/Ender 5 Pro.A good mate for your 3D printing. Inner Size: 17.5*22.2*26.9 inch.
- Safe to Use - The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well. Equipped with a selection of iron pipes, stable structure, and abundant space can help you to achieve maximum peace of mind printing.
- Quick and Easy Installation - Folding storage, easy to carry. Multi-faceted observation, reserved tool pockets. Economical 3D printing room. There are zippers on the front and top of the Tent, providing you with the greatest convenience.
- Extensive functionality - Dustproof and good noise reduction. Our 3D printer tent can reduce noise to a certain extent when printing, It can be used as a storage tool to provide a dust-proof and clean environment for printers, filaments, and accessories.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 27.36 x 4.33 x 6.29 Inches | Weight: 5.20 Pounds
Warranty: 1 year warranty
See On Amazon #12
Creality CR-10 Glass Bed Upgraded, 310x310x4mm
Asin: B082VTK6C7 | Model: Dawnblade191218 | PartNumber: Dawnblade191218 | Ean: 0745679683764 | UPC: 745679683764
Excellent Flatness - Improved 3D Printer Borosilicate Glass Plate Provides More Flat And More Smooth Build Surface Than Magnetic Mat Or Pei Sheet, Ensuring High Flatness For The Bottom Of Model..
Compatibility - The 3D Printer Parts Is Applicable With Creality 3D Printers Of Cr-10, Cr-10S, Cr-10 S3, Pls Confirm If This Glass Print Bed Compatible With Your Printer..
Super Convenient - Very Easy To Take Off The Model, No Tools Needed; This Glass Bed Could Be Fixed With Middle Sized Clips And Cleaned With Alcohol Or Acetone At Room Temperature..
No-Indentation Printing - Upgraded Cr-10 Glass Plate Has A Much Smaller Logo, Which Avoids Leaving Logo Indentations On Molds Surface During 3D Printing..
Features
- No Edge Curling - 2020 new Creality 3D printer glass bed, its microporous coating on the upper surface can adsorb the model to glass bed surface, no issues of print edges curling.
- No-indentation Printing - Upgraded CR-10 glass plate has a much smaller logo, which avoids leaving logo indentations on molds surface during 3D printing.
- Excellent Flatness - Improved 3D printer borosilicate glass plate provides more flat and more smooth build surface than magnetic mat or pei sheet, ensuring high flatness for the bottom of model.
- Super Convenient - Very easy to take off the model, no tools needed; This glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.
- Compatibility - The 3D printer parts is applicable with Creality 3D printers of CR-10, CR-10S, CR-10 S3, pls confirm if this glass print bed compatible with your printer.
- See more on Amazon...
Brand: Dawnblade | Manufacturer: Dawnblade
Dimensions: 0.16 x 12.20 x 12.20 inches
See On Amazon #13
SUNLU Magnetic Build Surface, Good Adhesion, 3pcs Flexible Removable Build Platforms for 3D Printers Ender 3 5 T3, Heated Bed Cover, 9.25x9.25inchs (235x235mm), 2 Coating Surface+1 Base Sticker Sheet
Asin: B0B9M3QTFL | Model: 3D Printer Platforms Magnetic Surface | PartNumber: 3D Printer Platforms Magnetic Surface
②【Good Adhesion】The Magnetic Built Surface Has A Special Coating Layer, Which Makes The Filaments Can Stick To The Printed Bed Easily And Reduces Warping..
⑥【Packing List (3Pcs)】Sunlu 3D Printer Magnetic Build Plate. 3 Pieces Sheet In Total: 2 Pieces Of Coating Surface Sheets And 1 Piece Of Sticker Base Sheet..
④【Fast Heat Conduction】The Thermal Conductivity Of Sunlu Magnetic Build Plate Is Very Good, Which Can Speed Up The Heating Rate, And Reduce Printing Waiting Time..
⑤【Heating Range】The Heating Range Is 0-100 Degrees, Which Is Compatible With Most Fdm 3D Printer Filaments. Pla、Pla Plus、Tpu、Abs、Petg、Asa、Nylon、Others..
③【Easy To Remove】The Magnetic Build Plate Is Removable And Flexible, Just Gently Bend The Print Surface, Remove The 3D Printing Model Easily..
①【Easy To Install】The Magnetic Plate Is Very Easy To Install. The Sticker Base Sheet Has A Good Adhesive On The Back Side, Just Paste The Base Sheet To The Printer Heated Bed, And Then Put The Coating Surface Sheet On The Base Sheet, Ready To Print..
Features
- Please double-check before attaching the base plate sheet: Stick half of sticker base sheet with coating surface sheet and lift it up. It is correct if both sheets can be lifted at the same time. If the two sheets can't be lifted at the same time, please rotate one of them 90 .
- Easy to Install The magnetic plate is very easy to install. The sticker base sheet has a good adhesive on the back side, just paste the base sheet to the printer heated bed, and then put the coating surface sheet on the base sheet, ready to print.
- Good Adhesion The magnetic built surface has a special coating layer, which makes the filaments can stick to the printed bed easily and reduces warping.
- Easy to Remove The magnetic build plate is removable and flexible, just gently bend the print surface, remove the 3D printing model easily.
- Fast Heat Conduction The thermal conductivity of SUNLU magnetic build plate is very good, which can speed up the heating rate, and reduce printing waiting time.
- Heating Range The heating range is 0-100 degrees, which is compatible with most FDM 3D printer filaments. PLA PLA Plus TPU ABS PETG ASA Nylon Others.
- Packing List (3PCS) SUNLU 3D Printer Magnetic Build Plate. 3 pieces sheet in total: 2 pieces of coating surface sheets and 1 piece of sticker base sheet.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
Weight: 0.88 pounds
See On Amazon #14
3D Printer Enclosure for Creality Ender 3/ Ender 3 Pro/Ender 3 V2-Fireproof & Dustproof Tent Constant Temperature Protective Cover for Anycubic Elegoo 3D Printers 25.6 21.6 29.5
Asin: B0B67WLTBF | Model: EC-3 | PartNumber: EC-3 | Ean: 0783970261229 | UPC: 783970261229
[Noise Reduce] Enclosed Build Chamber Would Effectively Block The Noise During Printing. Get A Slight Reduction In The Already Low Noise Out Put The Printer..
[Easy Installation]5 Minutes Quick Installation. No Extra Tools Required. With Glass Fiber Cube And Stainless Steel Corner That Features Light And Strong..
[Flame Retardant] This 3D Printer Used Aluminum Foil Inside That Resist 600°C ~800 °C To Isolate Accidentally Fire. Aluminum Material For More Heat Retention..
[Constant Temprature] Keep A Constant Temperature Printing Enviroment. Reducing The Bad Impact To 3D Prints. Improve The Prints Stability At Warm Status. Help Regulate The Temperature And Reduce Drafts For Improved Print Quality And Keep Curious Fingers (Or Paws) Off Your Print.C.
Features
- [Multifunction Structure] hinged doors on the front of Enclosure. 25.6 21.6 29.5 Size Compitable with 99% FDM printers,Ender 3, Ender 3 Pro, Ender 3 V2,Ender 3 S1 PRO,Ender 3 S1,Ender 5,Ender 7,Anycubic Kobra, Anycubic Mega Pro.ELEGOO Naptune 3. No glue is required for assembly and can easily disassembled for moving or replacing.
- [Constant Temprature] Keep a constant temperature Printing Enviroment. Reducing the Bad impact to 3D prints. improve the prints stability at warm status. Help Regulate the temperature and reduce drafts for improved print quality and keep curious fingers (or paws) off your print.c
- [Noise Reduce] Enclosed build chamber would Effectively Block the noise during printing. Get a slight reduction in the already low noise out put the printer.
- [Flame Retardant] This 3D Printer used aluminum foil inside that resist 600 C ~800 C to Isolate accidentally fire. aluminum material for more heat retention.
- [Easy Installation]5 minutes quick installation. No extra tools required. With Glass fiber Cube and stainless steel corner that features light and strong.
- See more on Amazon...
First Available: 07/11/2022
Brand: UNIDO | Manufacturer: Unido
Dimensions: 29.53 x 21.65 x 25.59 inches
Warranty: 2 year manufacturer
See On Amazon #15
Comgrow 3D Printer Enclosure Fireproof and Dustproof Tent for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro, Constant Temperature Protective 3D Printer Cover Room Storage 635x535x750mm
Asin: B093H1J46W
Safe To Use: The Interior Uses Pure Aluminum Film And Flame Retardant Appearance Material. Technically, If In A Fire, It Will Melt And Not Fire Itself Of The Enclosure And Will Not Spread As Well..
Dustproof And Stop The Outside Wind. No Outside Winds/Dusts Can Affect The Print Anymore. Stable Structure: Equipped With A Selection Of Iron Pipes, Stable Structure And Abundant Space..
Quick And Easy Installation: Folding Storage, Easy To Carry. Multi-Faceted Observation, Reserved Tool Pockets. Economical 3D Printing Room..
Fit For Ender 3/Ender 3 Pro/Ender 3S / Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo /Ender 3 Max/Cr-6 Se/Cr 20/Cr 20 Pro..
Features
- Constant Temperature: Keep a constant temperature printing environment, reducing the bad impact to printed models when low-temperature weather, improving printing stability.
- Fit for Ender 3/Ender 3 Pro/Ender 3S / Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo /Ender 3 Max/CR-6 SE/CR 20/CR 20 Pro.
- Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well.
- Quick and Easy Installation: Folding storage, easy to carry. Multi-faceted observation, reserved tool pockets. Economical 3D printing room.
- Dustproof and stop the outside wind. No outside winds/dusts can affect the print anymore. Stable Structure: Equipped with a selection of iron pipes, stable structure and abundant space.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 21.06 x 29.53 x 25.00 inches
See On Amazon #16
Creality Ender 3 Glass Bed Upgraded 3D Printer Platform Tempered Glass Plate Build Surface with Glass Clips, 235x235x4mm, for Ender 3 Pro/V2/S1/S1 Pro/V2 Neo, Ender 5 Pro,CR 20/pro Heated Bed Glass
Asin: B08Y5SNY7S | Model: ENO-Ender3-CB-Glass | PartNumber: ENO-Ender3-CB-Glass | Ean: 0705300791909 | UPC: 705300791909
Super Flatness, Fast And Uniform Heating..
Compatibility: Perfectly Suitable For The Ender 3/Pro/V2/S1/S1 Pro/V2 Neo, Ender 5/Pro,Cr 20/Pro, Cp-01,Compatible With All The Cartesian Style 3D Printer With A Mk3 Heated Bed Of 235×235Mm..
Durable: The Special Coating Is Inorganic And Has A Hardness Of 8 Mohs, And It Is Capable To Work At 400℃..
Excellent Adhesion: Ultrabase Covered By Microporous Coating, Shows Strong Adhesion In Printing. Easy To Take Off Models By Hand Or With A Little Help From The Scrapper For Very Large Models..
Features
- Creality upgraded Ender 3 glass bed carborundum tempered glass plate.
- Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models.
- Super flatness, fast and uniform heating.
- DURABLE: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400 .
- Compatibility: perfectly suitable for the Ender 3/pro/V2/S1/S1 Pro/V2 Neo, ender 5/pro,CR 20/pro, CP-01,compatible with all the Cartesian style 3D printer with a MK3 heated bed of 235 235mm.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #17
IMPRESA 2 Pack 3D Printer Glass Print Bed for Ender 3/5 / Pro / 3X - 235 x 235 x 4 mm - 8 Printer Bed Clips Included- Tempered Glass Replacement/Upgrade for Borosilicate Creality Platform-3D Printing
Asin: B07X3YGNFF | Model: 3DPrinterGlass | PartNumber: 3DPrinterGlass | Ean: 0850008283352 | UPC: 850008283352
8 Clips Included: No More Ugly Black Binder Clips Holding Your Print Bed. Not Only Are They Poor Quality, But They Limit The Build Area. What's More, Our 3D Printer Heatbeds Are Securely Packed In Protective, Custom Foam - They'll Arrive In Perfect Condition, Ready To Use!.
Incredible Value: Even The Best Printer Bed Will Have To Be Replaced Eventually. Our 2 Pack Provides An Incredible Value And Means That You'll Always Have A Spare On Hand.
Easy To Care For: Our Glass Is Super Easy To Clean - Just Wash It Off With Some Water, Clean It With Some Standard Glass Cleaner, Alcohol Or Acetone, Reapply Some 3D Printer Glue (If Desired) And Get Back To Printing.
Perfectly Compatible: Our 3D Printer Bed Plates / Platforms Are Compatible With The Creality Ender-3, Ender-3 Pro, Ender-3X, Ender-5, Cr-20, Cr-20 Pro, Geeetech A10, And Any Other 3D Printers Requiring A 235X235 Mm Print Bed.
Features
- Made From The Highest Quality, Perfectly Flat Glass: We use only the highest quality tempered glass - completely flat, smooth and just the right size (235mm x 235 x 4) - no scratches, dips or pits. Tempered glass is more durable and heat resistant than standard borosilicate glass, meaning fewer issues and less frequent replacement
- Perfectly Compatible: Our 3D printer bed plates / platforms are compatible with the Creality Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro, Geeetech A10, and any other 3D printers requiring a 235x235 mm print bed
- 8 Clips Included: No more ugly black binder clips holding your print bed. Not only are they poor quality, but they limit the build area. What's more, our 3d printer heatbeds are securely packed in protective, custom foam - they'll arrive in perfect condition, ready to use!
- Easy To Care For: Our glass is super easy to clean - just wash it off with some water, clean it with some standard glass cleaner, alcohol or acetone, reapply some 3D printer glue (if desired) and get back to printing
- Incredible Value: Even the best printer bed will have to be replaced eventually. Our 2 pack provides an incredible value and means that you'll always have a spare on hand
- See more on Amazon...
Brand: IMPRESA | Manufacturer: Impresa
See On Amazon #18
Creality Official Ender 3 Glass Bed 235x235x4mm for Ender 3 PRO/Ender 5 PRO/Ender 3 S1/Ender 3 Neo Hot Bed, Upgraded Tempered Glass Platform Heated Bed Build Surface, Good Adhesion Remove Easily
Asin: B0BVLJ8ZG9
【Great Flatness】 The Glass Platform Offers 0.15Mm Of Flatness Due To The Combination Of Glass And Composite, Ensuring Giving Smoother Build Surface Than A Magnetic Sheet Or Pei Sticker. Its Excellent Flatness Is Effective To Avoid Leveling Failure So As To High Flatness For The Bottom Of The Model..
【Official Creality 3D Store】We Provide Professional After-Sales Support. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Wide Compatibility】Carborundum Glass Platform Is Suitable For Creality 3D Printers Accessories: Ender-3, Ender-3 Pro, Ender-3S, Ender-3 V2, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender 5 S1, Ender 3 V3 Se, Or Suitable For Any Other Printers With A Bed Size Of 235X235mm..
【8 Mohs Hardness】 The Surface Of The Glass Platform Is Covered Inorganic Coating, Which Plays An Anti-Scratch And Dust-Proof Function. It Can Resistant To And Used Repeatedly Without Reducing Performance. What's More, It Is Very Easy To Clean, The Platform Will Be Cleaned By Using Alcohol Or Acetone After Using For Several Times..
Features
- Strong Adhesion & Remove Easily Adopted the technical principle of composite nano molecule, the glass bed has high viscosity after heating, ensuring that the filament won't move otherwhere. And the model does not warp or peel off during printing either. When the platform cools down, the microporous structure will contract as the hotbed cooling.
- 8 Mohs Hardness The surface of the glass platform is covered inorganic coating, which plays an anti-scratch and dust-proof function. It can resistant to and used repeatedly without reducing performance. What's more, it is very easy to clean, the platform will be cleaned by using alcohol or acetone after using for several times.
- Great Flatness The glass platform offers 0.15mm of flatness due to the combination of glass and composite, ensuring giving smoother build surface than a magnetic sheet or PEI sticker. Its excellent flatness is effective to avoid leveling failure so as to high flatness for the bottom of the model.
- Wide Compatibility Carborundum glass platform is suitable for Creality 3d printers accessories: Ender-3, Ender-3 Pro, Ender-3S, Ender-3 V2, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender 5 S1, Ender 3 V3 SE, or suitable for any other printers with a bed size of 235X235mm.
- Official Creality 3D Store We provide professional after-sales support. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #19
Creality Ender 3 Build Plate 235x235mm Double-Sided Magnetic Bed Plate Smooth/Textured Flexible Removable Printing Platform for Ender 3 V2/Ender 3 Pro/Ender 3 S1/3 S1 Pro/Ender 5/5S/5 Pro
Asin: B0C1GS8J8G | Ean: 0198549004419 | UPC: 198549004419
【Easy Model Removal】- Without Using Other Tools, You Can Easy To Remove The Printed Model By Just Bending The Pei Steel Plate Multiple Times After Printing. The Ender 3 Magnetic Bed Plate Has Excellent Elasticity And It Is Not Deformed After Repeated Bending..
【Original Quality】- You Will Get 100% Original Creality 235X235mm Double Side Pei Sheet X1. We Provide Fast And Friendly Customer Service To Solve Your Problem Within 24 Hours. If You Have Any Questions, Please Do Not Hesitate To Contact Us..
【Wide Application】- This Ender 3 Build Plate Is Compatible With Ender-3, Ender-3 Pro, Ender-3S, Ender-3 V2, Ender-5, Ender-5S, Ender-5 Pro, Ender-3 S1, Ender-3 S1 Pro. Note: To Be Compatible With Ender-3 S1/Ender-3 S1 Pro, Please Remove The Two Positioning Screws On The Hotbed First. The Double Side Pei Printing Surface Is Compatible With Pla, Petg, Peek, Abs And Any Other Filaments..
【Thin And Light】- The Thickness Of This Ender 3 Bed Plate Is Only 1.2Mm. Thin Thickness Can Reduce The Inertia Of The Platform's Movement And Prevent It From Shaking During Printing. This Helps 3D Printers Run Smoothly And Improve Printing Quality..
Features
- 2 in 1 - One side is a smooth PEI surface. The PEI material ensures that your 3D prints adhere well to the bed and do not warp or move during printing. The smooth PEI surface makes sure that your model has a flat bottom. The other side is a textured sticker. This results in better adhesion and less warping, which leads to better prints overall.
- Thin And Light - The thickness of this Ender 3 bed plate is only 1.2mm. Thin thickness can reduce the inertia of the platform's movement and prevent it from shaking during printing. This helps 3D printers run smoothly and improve printing quality.
- Easy Model Removal - Without using other tools, You can easy to remove the printed model by just bending the PEI steel plate multiple times after printing. The Ender 3 magnetic bed plate has excellent elasticity and it is not deformed after repeated bending.
- Wide Application - This Ender 3 build plate is compatible with Ender-3, Ender-3 Pro, Ender-3S, Ender-3 V2, Ender-5, Ender-5S, Ender-5 Pro, Ender-3 S1, Ender-3 S1 Pro. Note: To be compatible with Ender-3 S1/Ender-3 S1 Pro, please remove the two positioning screws on the hotbed first. The double side PEI printing surface is compatible with PLA, PETG, PEEK, ABS and any other filaments.
- Original Quality - You will get 100% Original Creality 235x235mm double side PEI sheet x1. We provide fast and friendly customer service to solve your problem within 24 hours. If you have any questions, please do not hesitate to contact us.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #20
Happy Shopping Day OriGlam Offset Feeler Gauge Set with 16 Blades, Standard Metric Offset Valve Feeler Gauge for Measuring Gap Width/Thickness 0.05mm - 1.0mm
Asin: B07GBZLNBS | Model: INS_31P_1 | PartNumber: INS_31P_1 | Ean: 4895192453538
√ Hardened Tempered Steel With A Lube Oil Coating To Prevent Pitting And Corrosion; Each Blade Has Sizes Laser Etched For Easy Identification..
√ Blade Specifications: 0.05, 0.1, 0.15, 0.2, 0.25, 0.3, 0.35, 0.4, 0.5, 0.55, 0.6, 0.7, 0.75, 0.8, 0.9, 1.0..
√ Blades Are Bound Within A Blade Protector To Prevent Loss Of Individual Blades..
√ Various Applications: Use On Anything From Guitars To Engines And Everything In Between; Metric Standard Sizes..
Features
- Measure Gaps: Use this ABN Feeler Gauge when you need to quickly and easily measure gap widths
- Various Applications: Use on anything from guitars to engines and everything in between; Metric standard sizes.
- Hardened tempered steel with a lube oil coating to prevent pitting and corrosion; Each blade has sizes laser etched for easy identification.
- Blades are bound within a blade protector to prevent loss of individual blades.
- Blade Specifications: 0.05, 0.1, 0.15, 0.2, 0.25, 0.3, 0.35, 0.4, 0.5, 0.55, 0.6, 0.7, 0.75, 0.8, 0.9, 1.0.
- See more on Amazon...
Brand: OriGlam | Manufacturer: OriGlam
Weight: 0.22 Pounds
See On Amazon
Looking For Something Else?
Search