uxcell #25/04C-1 Roller Chain 10 Feet 1/4" Pitch Carbon Steel Roller Chains with 2 Free Master Connector Links for Mini Bikes, Motorcycles, 480 Links
Asin: B0CWQMHQPN
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Strict Process Measures: The Roller Chain Links Are Shot-Peened During The Production Process, Which Can Improve The Strength And Toughness Of The Metal. During The Chain Assembly Process, All Chain Components Are Oriented Ensuring The Pins And Inner Plates Are Positioned Correctly For Better Chain Strength And Longer Service Life..
Note: Please Confirm The Chain Model You Need Before Purchasing. Regularly Checking And Cleaning Your Chain Can Extend Its Life..
Wide Application: The 25 Roller Chain Is Designed To Reduce Friction, Provide Higher Efficiency And Lower Wear, And Can Be Used To Transmit Power And Rotational Motion. Suitable For Mini Bikes, Scooters, Small Power Tools, Handheld Power Tools, Etc., Resulting In More Efficient Use And Less Wear..
Material: The Single Row Roller Chain Is Made Of High-Strength Carbon Steel And Through Strict Process Measures To Provide Sufficient Load Capacity And Durability..
Features
- Product Specification: The #25 roller chain 480 link total length: 10 feet/3.048m, roller diameter: 0.13"/3.3mm, pin diameter: 0.079"/2mm, inner plate height: 0.236"/6mm; pitch: 1/4"/6.35mm; comes with 2 free chain master links.
- Material: The single row roller chain is made of high-strength carbon steel and through strict process measures to provide sufficient load capacity and durability.
- Strict Process Measures: The roller chain links are shot-peened during the production process, which can improve the strength and toughness of the metal. During the chain assembly process, all chain components are oriented ensuring the pins and inner plates are positioned correctly for better chain strength and longer service life.
- Wide Application: The 25 roller chain is designed to reduce friction, provide higher efficiency and lower wear, and can be used to transmit power and rotational motion. Suitable for mini bikes, scooters, small power tools, handheld power tools, etc., resulting in more efficient use and less wear.
- Note: Please confirm the chain model you need before purchasing. Regularly checking and cleaning your chain can extend its life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 25 04C1 Roller Chain
#1
uxcell 6Pcs #25 Chain Master Connector Link Roller, 1/4" Pitch Carbon Steel, Standard Connecting Split Links for 04C Chain
Asin: B0B9GL69W2 | Model: a22062000ux0545 | PartNumber: a22062000ux0545
Appliance: This Chain Link Roller Connector Is Easy For Drive Chains. Regular Cleaning And Lubrication Can Extend Service Life..
Note: Please Pay Attention To The Size And Model Before Ordering..
How To Use: You Can Use Appropriately Sized Circlip Pliers To Take Apart The Old Chain Link Roller And Remove It From The Chain. To Install The New Chain Joint, Insert The Pin First, Then Snap The Spring Clip In. Wear Gloves Carefully For Safety..
Material: Made Of Carbon Steel Materials, Finely Processing, Precision Processing, Strong, Anti-Oxidation, And Durable..
Features
- Specifications: Chain No.: 04C(#25); Total Length: 11.3mm / 0.44-inch; Roller Diameter: 3.3mm / 0.13-inch; Pin Length: 8.9mm / 0.35-inch; Pin Diameter: 2.31mm / 0.09-inch; Inner Plate Depth: 5.9mm / 0.23-inch; Pitch: 1/4-inch / 6.35mm; Width Between Inner Plates: 3.1mm / 0.12-inch; Average Tensile Strenght:4.6kN; 6 x Connector Link Roller
- Material: Made of carbon steel materials, finely processing, precision processing, strong, anti-oxidation, and durable.
- Appliance: This chain link roller connector is Easy for drive chains. Regular cleaning and lubrication can extend service life.
- How to Use: You can use appropriately sized circlip pliers to take apart the old chain link roller and remove it from the chain. To install the new chain joint, insert the pin first, then snap the spring clip in. Wear gloves carefully for safety.
- Note: Please pay attention to the size and model before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell 23 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 8mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09RB3QVT4 | Model: a21121100ux0368 | PartNumber: a21121100ux0368
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #3
uxcell 5Pcs #25 Chain Offset Half Link Roller, 1/4" Pitch Carbon Steel, Standard Chain End Connector Split Links for 04C Chain
Asin: B09VXWJSYG | Model: a22011300ux0485 | PartNumber: a22011300ux0485
Appliance: This Chain Link Roller Connector Is Easy For Drive Chains. Regular Cleaning And Lubrication Can Extend Service Life..
Note: Please Pay Attention To The Size And Model Before Ordering..
How To Use: You Can Use Appropriately Sized Circlip Pliers To Take Apart The Old Chain Link Roller And Remove It From The Chain. To Install The New Chain Joint, Insert The Pin First, Then Snap The Spring Clip In. Wear Gloves Carefully For Safety..
Material: Made Of Carbon Steel Materials, Finely Processing, Precision Processing, Strong, Anti-Oxidation, And Durable..
Features
- Specifications: Chain No.: 04C(#25); Total Length: 11.8mm / 0.46-inch; Roller Diameter: 3.3mm / 0.13-inch; Pin Length: 8.9mm / 0.35-inch; Pin Diameter: 2.31mm / 0.09-inch; Inner Plate Depth: 5.9mm / 0.23-inch; Pitch: 1/4-inch / 6.35mm; Width Between Inner Plates: 3.1mm / 0.12-inch; Average Tensile Strenght:4.6kN; 5 x Connector Offset Half Link Roller
- Material: Made of carbon steel materials, finely processing, precision processing, strong, anti-oxidation, and durable.
- Appliance: This chain link roller connector is Easy for drive chains. Regular cleaning and lubrication can extend service life.
- How to Use: You can use appropriately sized circlip pliers to take apart the old chain link roller and remove it from the chain. To install the new chain joint, insert the pin first, then snap the spring clip in. Wear gloves carefully for safety.
- Note: Please pay attention to the size and model before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell 2pcs Sprocket Type B Hub 10mm Bore, 1/4-Inch Pitch, 12 Teeth Stainless Steel Single Strand Roller Sprocket for Chain DIN/ISO No. 04C-1 and ANSI No. #25
Asin: B0CS61TMZX
Application: The Sprocket Is Applied In Various Industrial Circumstances, Such As Milling Machines, Drill Presses, And Other Machinery Transmission Operations..
Installation: Chain Sprockets Are Typically Mounted In A Fixed Position On A Stationary Shaft. They Are Secured Using A Keyway And 2Pcs Set Screws Positioned At 90-Degree Intervals, Ensuring A Secure And Convenient Installation Of The Sprocket Onto The Shaft..
Feature: The B-Type Sprocket Is Equipped With A Set Of Teeth On Its Circumference, Connected To Other Gears Through A Fasten. On The Opposite Side, There Is A Hub That Can Accommodate Different Types Of Bushings. It Ensures High Transmission Efficiency When Transferring Energy..
Material: The Sprocket Is Made Of Stainless Steel, Which Exhibits Excellent Corrosion Resistance, Heat Resistance, Low-Temperature Strength, And Mechanical Properties..
Features
- Size: 12 teeth mechanical roller sprockets with 1/4" (6.35mm) pitch, 7/18" (10mm) inner hole diameter. For more sizes, please refer to the pictures.
- Material: The sprocket is made of stainless steel, which exhibits excellent corrosion resistance, heat resistance, low-temperature strength, and mechanical properties.
- Application: The sprocket is applied in various industrial circumstances, such as milling machines, drill presses, and other machinery transmission operations.
- Feature: The B-type sprocket is equipped with a set of teeth on its circumference, connected to other gears through a fasten. On the opposite side, there is a hub that can accommodate different types of bushings. It ensures high transmission efficiency when transferring energy.
- Installation: Chain sprockets are typically mounted in a fixed position on a stationary shaft. They are secured using a keyway and 2pcs set screws positioned at 90-degree intervals, ensuring a secure and convenient installation of the sprocket onto the shaft.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell #35/06C-1 Roller Chain 4 Feet 3/8" Pitch Carbon Steel Roller Chains with Free Master Connector Link for Bicycles, Go-Karts, 128 Links
Asin: B0CWQL2P7S
Strict Process Measures: The Roller Chain Links Are Shot-Peened During The Production Process, Which Can Improve The Strength And Toughness Of The Metal. During The Chain Assembly Process, All Chain Components Are Oriented Ensuring The Pins And Inner Plates Are Positioned Correctly For Better Chain Strength And Longer Service Life..
Note: Please Confirm The Chain Model You Need Before Purchasing. Regularly Checking And Cleaning Your Chain Can Extend Its Life..
Wide Application: The 25 Roller Chain Is Designed To Reduce Friction, Provide Higher Efficiency And Lower Wear, And Can Be Used To Transmit Power And Rotational Motion. Suitable For Mini Bikes, Scooters, Small Power Tools, Handheld Power Tools, Etc., Resulting In More Efficient Use And Less Wear..
Material: The Single Row Roller Chain Is Made Of High-Strength Carbon Steel And Through Strict Process Measures To Provide Sufficient Load Capacity And Durability..
Features
- Product Specification: The #35 roller chain 128 link total length: 4 feet/1.2192m, roller diameter: 0.082"/2.08mm, pin diameter: 0.138"/3.5mm, inner plate height: 0.354"/9mm; pitch: 3/8"/9.525mm; comes with a free chain master link.
- Material: The single row roller chain is made of high-strength carbon steel and through strict process measures to provide sufficient load capacity and durability.
- Strict Process Measures: The roller chain links are shot-peened during the production process, which can improve the strength and toughness of the metal. During the chain assembly process, all chain components are oriented ensuring the pins and inner plates are positioned correctly for better chain strength and longer service life.
- Wide Application: The 25 roller chain is designed to reduce friction, provide higher efficiency and lower wear, and can be used to transmit power and rotational motion. Suitable for mini bikes, scooters, small power tools, handheld power tools, etc., resulting in more efficient use and less wear.
- Note: Please confirm the chain model you need before purchasing. Regularly checking and cleaning your chain can extend its life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell 12Pcs #25 Chain Master Connector Link Roller, 1/4" Pitch Carbon Steel, Standard Connecting Split Links for 04C Chain
Asin: B0B9GKZH1K | Model: a22062000ux0562 | PartNumber: a22062000ux0562
Appliance: This Chain Link Roller Connector Is Easy For Drive Chains. Regular Cleaning And Lubrication Can Extend Service Life..
Note: Please Pay Attention To The Size And Model Before Ordering..
How To Use: You Can Use Appropriately Sized Circlip Pliers To Take Apart The Old Chain Link Roller And Remove It From The Chain. To Install The New Chain Joint, Insert The Pin First, Then Snap The Spring Clip In. Wear Gloves Carefully For Safety..
Material: Made Of Carbon Steel Materials, Finely Processing, Precision Processing, Strong, Anti-Oxidation, And Durable..
Features
- Specifications: Chain No.: 04C(#25); Total Length: 11.3mm / 0.44-inch; Roller Diameter: 3.3mm / 0.13-inch; Pin Length: 8.9mm / 0.35-inch; Pin Diameter: 2.31mm / 0.09-inch; Inner Plate Depth: 5.9mm / 0.23-inch; Pitch: 1/4-inch / 6.35mm; Width Between Inner Plates: 3.1mm / 0.12-inch; Average Tensile Strenght:4.6kN; 12 x Connector Link Roller
- Material: Made of carbon steel materials, finely processing, precision processing, strong, anti-oxidation, and durable.
- Appliance: This chain link roller connector is Easy for drive chains. Regular cleaning and lubrication can extend service life.
- How to Use: You can use appropriately sized circlip pliers to take apart the old chain link roller and remove it from the chain. To install the new chain joint, insert the pin first, then snap the spring clip in. Wear gloves carefully for safety.
- Note: Please pay attention to the size and model before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell 16Pcs #25 Chain Master Connector Link Roller, 1/4" Pitch Carbon Steel, Standard Connecting Split Links for 04C Chain
Asin: B0B9GKCDBC | Model: a22062000ux0577 | PartNumber: a22062000ux0577
Appliance: This Chain Link Roller Connector Is Easy For Drive Chains. Regular Cleaning And Lubrication Can Extend Service Life..
Note: Please Pay Attention To The Size And Model Before Ordering..
How To Use: You Can Use Appropriately Sized Circlip Pliers To Take Apart The Old Chain Link Roller And Remove It From The Chain. To Install The New Chain Joint, Insert The Pin First, Then Snap The Spring Clip In. Wear Gloves Carefully For Safety..
Material: Made Of Carbon Steel Materials, Finely Processing, Precision Processing, Strong, Anti-Oxidation, And Durable..
Features
- Specifications: Chain No.: 04C(#25); Total Length: 11.3mm / 0.44-inch; Roller Diameter: 3.3mm / 0.13-inch; Pin Length: 8.9mm / 0.35-inch; Pin Diameter: 2.31mm / 0.09-inch; Inner Plate Depth: 5.9mm / 0.23-inch; Pitch: 1/4-inch / 6.35mm; Width Between Inner Plates: 3.1mm / 0.12-inch; Average Tensile Strenght:4.6kN; 16 x Connector Link Roller
- Material: Made of carbon steel materials, finely processing, precision processing, strong, anti-oxidation, and durable.
- Appliance: This chain link roller connector is Easy for drive chains. Regular cleaning and lubrication can extend service life.
- How to Use: You can use appropriately sized circlip pliers to take apart the old chain link roller and remove it from the chain. To install the new chain joint, insert the pin first, then snap the spring clip in. Wear gloves carefully for safety.
- Note: Please pay attention to the size and model before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell 25 Tooth Roller Sprocket, 25 Chain Single Strand 1/4" Pitch, 12mm Bore Black Oxide C45 Carbon Steel, 5x2.3mm Keyway with Set Screws for ISO 04C
Asin: B09SCP6SFR | Model: a21121100ux0411 | PartNumber: a21121100ux0411
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Keyway With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell 5Pcs #25 Chain Master Connector Link Roller, 1/4" Pitch Carbon Steel, Standard Connecting Split Links for 04C Chain
Asin: B09VXX7LVL
Appliance: This Chain Link Roller Connector Is Easy For Drive Chains. Regular Cleaning And Lubrication Can Extend Service Life..
Note: Please Pay Attention To The Size And Model Before Ordering..
How To Use: You Can Use Appropriately Sized Circlip Pliers To Take Apart The Old Chain Link Roller And Remove It From The Chain. To Install The New Chain Joint, Insert The Pin First, Then Snap The Spring Clip In. Wear Gloves Carefully For Safety..
Material: Made Of Carbon Steel Materials, Finely Processing, Precision Processing, Strong, Anti-Oxidation, And Durable..
Features
- Specifications: Chain No.: 04C(#25); Total Length: 11.3mm / 0.44-inch; Roller Diameter: 3.3mm / 0.13-inch; Pin Length: 8.9mm / 0.35-inch; Pin Diameter: 2.31mm / 0.09-inch; Inner Plate Depth: 5.9mm / 0.23-inch; Pitch: 1/4-inch / 6.35mm; Width Between Inner Plates: 3.1mm / 0.12-inch; Average Tensile Strenght:4.6kN; 5 x Connector Link Roller
- Material: Made of carbon steel materials, finely processing, precision processing, strong, anti-oxidation, and durable.
- Appliance: This chain link roller connector is Easy for drive chains. Regular cleaning and lubrication can extend service life.
- How to Use: You can use appropriately sized circlip pliers to take apart the old chain link roller and remove it from the chain. To install the new chain joint, insert the pin first, then snap the spring clip in. Wear gloves carefully for safety.
- Note: Please pay attention to the size and model before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell #25 Chain Roller Sprocket, 5mm Bore 1/4" Pitch 12 Tooth Single Strand Chain Sprocket, C45 Carbon Steel 25 Roller Chain Sprocket with Set Screws for ISO 04C Chain, 2Pcs
Asin: B0CD1RHV3X
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Specifications: Number of Teeth: 12, Outside Diameter: 27.5mm / 1.08-inch, Bump Width: 12mm / 0.47-inch, Total Width: 15mm / 0.59-inch, Bore Diameter: 5mm / 0.2-inch, Pitch: 1/4-inch / 6.35mm, Tooth Width: 3mm / 0.12-inch, Set Screw Size: M5, 2 x Chain Sprocket, 4 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell 8Pcs #25 Chain Master Connector Link Roller, 1/4" Pitch Carbon Steel, Standard Connecting Split Links for 04C Chain
Asin: B09VXZ14PW
Appliance: This Chain Link Roller Connector Is Easy For Drive Chains. Regular Cleaning And Lubrication Can Extend Service Life..
Note: Please Pay Attention To The Size And Model Before Ordering..
How To Use: You Can Use Appropriately Sized Circlip Pliers To Take Apart The Old Chain Link Roller And Remove It From The Chain. To Install The New Chain Joint, Insert The Pin First, Then Snap The Spring Clip In. Wear Gloves Carefully For Safety..
Material: Made Of Carbon Steel Materials, Finely Processing, Precision Processing, Strong, Anti-Oxidation, And Durable..
Features
- Specifications: Chain No.: 04C(#25); Total Length: 11.3mm / 0.44-inch; Roller Diameter: 3.3mm / 0.13-inch; Pin Length: 8.9mm / 0.35-inch; Pin Diameter: 2.31mm / 0.09-inch; Inner Plate Depth: 5.9mm / 0.23-inch; Pitch: 1/4-inch / 6.35mm; Width Between Inner Plates: 3.1mm / 0.12-inch; Average Tensile Strenght:4.6kN; 8 x Connector Link Roller
- Material: Made of carbon steel materials, finely processing, precision processing, strong, anti-oxidation, and durable.
- Appliance: This chain link roller connector is Easy for drive chains. Regular cleaning and lubrication can extend service life.
- How to Use: You can use appropriately sized circlip pliers to take apart the old chain link roller and remove it from the chain. To install the new chain joint, insert the pin first, then snap the spring clip in. Wear gloves carefully for safety.
- Note: Please pay attention to the size and model before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell 25 Tooth Roller Sprocket B Type, 25 Chain Single Strand 1/4" Pitch, 8 x 7.5mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C Chain
Asin: B09SCJ4LG9 | Model: a21121100ux0421 | PartNumber: a21121100ux0421
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Tooth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Tooth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. D Inner Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. D inner hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong Tooth that can latch onto the chain. It is suggested that chain sprockets have at least three Tooth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #13
uxcell 25 Tooth #25 Chain Roller Sprocket, Double Strand 1/4" Pitch, 12mm Bore Black Oxide C45 Carbon Steel for ISO 04C Chains
Asin: B0B2JSWTSG | Model: a22040200ux0517 | PartNumber: a22040200ux0517
Double Strand Sprocket With Two Sets Of Teeth For Use With Double Strand Chains, Which Have A Higher Stability And Can Support Greater Loads Than Single Strand Chains..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Specifications: Number of Teeth: 25; Outside Diameter: 54mm / 2.13-inch; Total Width: 20mm / 0.79-inch; Bore Diameter: 12mm / 0.47-inch; Pitch: 1/4-inch / 6.35mm; Tooth Width: 3mm / 0.25-inch; 1 x Chain Sprocket
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. The shaft can be fixed well, which is convenient to use.
- Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell 25 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 18mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09SD9143Y | Model: a21121100ux0406 | PartNumber: a21121100ux0406
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #15
uxcell 2pcs Sprocket Type B Hub 8mm Bore, 1/4-Inch Pitch, 10 Teeth Stainless Steel Single Strand Roller Sprocket for Chain DIN/ISO No. 04C-1 and ANSI No. #25
Asin: B0CS5R96LG
Application: The Sprocket Is Applied In Various Industrial Circumstances, Such As Milling Machines, Drill Presses, And Other Machinery Transmission Operations..
Installation: Chain Sprockets Are Typically Mounted In A Fixed Position On A Stationary Shaft. They Are Secured Using A Keyway And 2Pcs Set Screws Positioned At 90-Degree Intervals, Ensuring A Secure And Convenient Installation Of The Sprocket Onto The Shaft..
Feature: The B-Type Sprocket Is Equipped With A Set Of Teeth On Its Circumference, Connected To Other Gears Through A Fasten. On The Opposite Side, There Is A Hub That Can Accommodate Different Types Of Bushings. It Ensures High Transmission Efficiency When Transferring Energy..
Material: The Sprocket Is Made Of Stainless Steel, Which Exhibits Excellent Corrosion Resistance, Heat Resistance, Low-Temperature Strength, And Mechanical Properties..
Features
- Size: 10 teeth mechanical roller sprockets with 1/4" (6.35mm) pitch, 5/16" (8mm) inner hole diameter. For more sizes, please refer to the pictures.
- Material: The sprocket is made of stainless steel, which exhibits excellent corrosion resistance, heat resistance, low-temperature strength, and mechanical properties.
- Application: The sprocket is applied in various industrial circumstances, such as milling machines, drill presses, and other machinery transmission operations.
- Feature: The B-type sprocket is equipped with a set of teeth on its circumference, connected to other gears through a fasten. On the opposite side, there is a hub that can accommodate different types of bushings. It ensures high transmission efficiency when transferring energy.
- Installation: Chain sprockets are typically mounted in a fixed position on a stationary shaft. They are secured using a keyway and 2pcs set screws positioned at 90-degree intervals, ensuring a secure and convenient installation of the sprocket onto the shaft.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell #25 Chain Idler Sprocket, 8mm Bore 1/4" Pitch 20 Tooth Tensioner, Black Oxide Finish C45 Carbon Steel with Insert Single Bearing for ISO 04C Chains
Asin: B09PDSZ6YP | Model: a21120100ux0212 | PartNumber: a21120100ux0212
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 20; Bearing Model: 608ZZ; Outside Diameter: 43mm / 1.69-inch; Bump Width: 5mm / 0.2-inch; Total Width: 13mm / 0.51-inch; Bore Diameter: 8mm / 0.31-inch; Pitch: 1/4-inch / 6.35mm; Tooth Width: 2.8mm / 0.11-inch; 1 x Idler Sprocket
- Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell 2pcs Sprocket Type B Hub 6mm Bore, 1/4-Inch Pitch, 9 Teeth Stainless Steel Single Strand Roller Sprocket for Chain DIN/ISO No. 04C-1 and ANSI No. #25
Asin: B0CS5R96LN
Application: The Sprocket Is Applied In Various Industrial Circumstances, Such As Milling Machines, Drill Presses, And Other Machinery Transmission Operations..
Installation: Chain Sprockets Are Typically Mounted In A Fixed Position On A Stationary Shaft. They Are Secured Using A Keyway And 2Pcs Set Screws Positioned At 90-Degree Intervals, Ensuring A Secure And Convenient Installation Of The Sprocket Onto The Shaft..
Feature: The B-Type Sprocket Is Equipped With A Set Of Teeth On Its Circumference, Connected To Other Gears Through A Fasten. On The Opposite Side, There Is A Hub That Can Accommodate Different Types Of Bushings. It Ensures High Transmission Efficiency When Transferring Energy..
Material: The Sprocket Is Made Of Stainless Steel, Which Exhibits Excellent Corrosion Resistance, Heat Resistance, Low-Temperature Strength, And Mechanical Properties..
Features
- Size: 9 teeth mechanical roller sprockets with 1/4" (6.35mm) pitch, 15/64" (6mm) inner hole diameter. For more sizes, please refer to the pictures.
- Material: The sprocket is made of stainless steel, which exhibits excellent corrosion resistance, heat resistance, low-temperature strength, and mechanical properties.
- Application: The sprocket is applied in various industrial circumstances, such as milling machines, drill presses, and other machinery transmission operations.
- Feature: The B-type sprocket is equipped with a set of teeth on its circumference, connected to other gears through a fasten. On the opposite side, there is a hub that can accommodate different types of bushings. It ensures high transmission efficiency when transferring energy.
- Installation: Chain sprockets are typically mounted in a fixed position on a stationary shaft. They are secured using a keyway and 2pcs set screws positioned at 90-degree intervals, ensuring a secure and convenient installation of the sprocket onto the shaft.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell 24 Tooth Roller Sprocket, 25 Chain Single Strand 1/4" Pitch, 12mm Bore Black Oxide C45 Carbon Steel, 4x1.8mm Keyway with Set Screws for ISO 04C
Asin: B09RB1GD44 | Model: a21121100ux0384 | PartNumber: a21121100ux0384
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Keyway With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 10Pcs #25 Chain Master Connector Link Roller, 1/4" Pitch Carbon Steel, Standard Connecting Split Links for 04C Chain
Asin: B09VXXF9DG
Appliance: This Chain Link Roller Connector Is Easy For Drive Chains. Regular Cleaning And Lubrication Can Extend Service Life..
Note: Please Pay Attention To The Size And Model Before Ordering..
How To Use: You Can Use Appropriately Sized Circlip Pliers To Take Apart The Old Chain Link Roller And Remove It From The Chain. To Install The New Chain Joint, Insert The Pin First, Then Snap The Spring Clip In. Wear Gloves Carefully For Safety..
Material: Made Of Carbon Steel Materials, Finely Processing, Precision Processing, Strong, Anti-Oxidation, And Durable..
Features
- Specifications: Chain No.: 04C(#25); Total Length: 11.3mm / 0.44-inch; Roller Diameter: 3.3mm / 0.13-inch; Pin Length: 8.9mm / 0.35-inch; Pin Diameter: 2.31mm / 0.09-inch; Inner Plate Depth: 5.9mm / 0.23-inch; Pitch: 1/4-inch / 6.35mm; Width Between Inner Plates: 3.1mm / 0.12-inch; Average Tensile Strenght:4.6kN; 10 x Connector Link Roller
- Material: Made of carbon steel materials, finely processing, precision processing, strong, anti-oxidation, and durable.
- Appliance: This chain link roller connector is Easy for drive chains. Regular cleaning and lubrication can extend service life.
- How to Use: You can use appropriately sized circlip pliers to take apart the old chain link roller and remove it from the chain. To install the new chain joint, insert the pin first, then snap the spring clip in. Wear gloves carefully for safety.
- Note: Please pay attention to the size and model before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell 18 Tooth Roller Sprocket B Type, 25 Chain, Single Strand 1/4" Pitch, 10mm Bore Black Oxide C45 Carbon Steel with Set Screws for ISO 04C
Asin: B09QSP1FFR | Model: a21121100ux0316 | PartNumber: a21121100ux0316
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Package Content: 1 x Chain Sprocket, 2 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon
Looking For Something Else?
Search