Powder Painted PEI Spring Steel Magnetic Build Plate Steel PEI Magnetic Build Plate 120x120mm Spring Steel Build Plate for Magnetic Build Plate 3D Printer Accessories
Asin: B0CZ7HMFKR | Model: WALFRONTzxb598viek | PartNumber: WALFRONTzxb598viek
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Wear And High Temperature Resistance: The First Layer Of Build Plate Is Pei Powder Spraying, Matte Texture, Wear Resistant, Not Easy To Scratch, Can Be Good Adhesion To Various Printing Materials, Such As Pla, Abs, Tpu, Tetg, Nylon, Temperature Resistanc.
Frosted Printing: The Surface Adhesion Of Spring Steel Build Plate Is Strong, No Glue Is Needed, Cold Printing Can Be Achieved, And No Warping Edge, The Bottom Surface Of The Printed Product With Frosted Effect, Fine And Beautiful.
Soft Base: The Third Layer Of Magnetic Base Of Build Plate Is Made Of Soft Magnetic Rubber, Has Soft Texture, And Has Good Magnetic And Temperature Resistance, With The Back Glue, Can Be Directly Affixed To The Hot Bed Platform, Long Term High Temperatur.
Elastic Without Deformation: The Second Layer Is The Spring Plate, Possess Good Flatness. Spring Steel Is Specially Used To Make Springs And Elastic Components, Which Has The Ability To Deform Flexibly And Is Difficult To Be Permanently Deformed By Human.
Features
- APPLICABLE MODEL: Double sided PEI powder spraying magnetic spring plate platform is applicable for voron etc. Make sure your printer platform is compatible with the print size
- ELASTIC WITHOUT DEFORMATION: The second layer is the spring plate, possess good flatness. Spring steel is specially used to make springs and elastic components, which has the ability to deform flexibly and is difficult to be permanently deformed by human
- WEAR AND HIGH TEMPERATURE RESISTANCE: The first layer of build plate is PEI powder spraying, matte texture, wear resistant, not easy to scratch, can be good adhesion to various printing materials, such as PLA, ABS, TPU, TETG, nylon, temperature resistanc
- SOFT BASE: The third layer of magnetic base of build plate is made of soft magnetic rubber, has soft texture, and has good magnetic and temperature resistance, with the back glue, can be directly affixed to the hot bed platform, long term high temperatur
- FROSTED PRINTING: The surface adhesion of spring steel build plate is strong, no glue is needed, cold printing can be achieved, and no warping edge, the bottom surface of the printed product with frosted effect, fine and beautiful
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon Similar To Powder Painted PEI Spring Steel
#1
Comgrow PEI Sheet Magnetic Flexible Heated Bed, PEI Spring Steel 235x235mm for ELEGOO Neptune 3 Pro/4/Anycubic Kobra/Creality Ender 3/Ender 3 Pro/Ender 3 V2/3 V2 Neo/3 Neo/Ender 3 S1/3 S1 Pro
Asin: B07XBM24HN | Ean: 6973298330422
Easy Model Removal-The Pei Spring Steel 235X235 Is Easy To Adhere To The Printing Surface, Easy To Remove The Prints And Flex Slightly To Pop Your Print Right Off..
Wide Application - The Pei Sheet 235X235 Is Perfect For Elegoo Neptune 3 Pro/Neptune 4/Anycubic Kobra/Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3V2/ Cr 20/ Cr 20 Pro/ Ender 5/ Ender 5 Pro. Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
High Ressistance-Our Ender 3 Pei Build Plate Is Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
All New Functionality - The Flexible Surface Of The Ender 3 Pro Pei Bed Can Easily Be Cut To Any Dimension Making It Perfect For All Build Sizes And All Fdm Printer Models.No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety..
Features
- WELL MADE PEI SHEET- Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Our PEI bed is flexible, removable, and pei sheet can stick to magnetics very well. High strength and heat resistance.
- ALL NEW FUNCTIONALITY - The flexible surface of the ender 3 Pro PEI bed can easily be cut to any dimension making it perfect for all build sizes and all FDM printer models.No more tape, no more glue, no more shovel, and release your printing anxiety.
- EASY MODEL REMOVAL-The PEI spring steel 235x235 is easy to adhere to the printing surface, easy to remove the prints and flex slightly to pop your print right off.
- HIGH RESSISTANCE-Our Ender 3 PEI build plate is used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
- WIDE APPLICATION - The PEI sheet 235x235 is perfect for ELEGOO Neptune 3 Pro/Neptune 4/Anycubic Kobra/Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3v2/ CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro. Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.79 x 7.87 x 7.87 inches
See On Amazon #2
Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface
Asin: B092ZVTJSK | Model: 001 | PartNumber: 001 | Ean: 0752004396282 | UPC: 752004396282
【Wide Application】The Pei Printing Surface Can Compatible With Pla, Petg, Peek, Abs And Any Other Filaments. Perfect Printing Size Works Well With Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To Be Compatible With Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke Ender 3 V3 K1 K1c, Please Remove The Two Positioning Screws On The Hotbed First.).
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" To Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Simple Installation】Just Need To Place The Bottom 3M Adhesive Surface On Top Of The No-Heated Bed. The Steel Pei Plate Can Be Magnetically Bonded To The Magnetic Sticker. If It Fails To Adsorb, Please Rotate It 90 Degrees And Try Again..
【Easy Adhere And Remove】 Easy To Adhere The Filaments To The Printing Bed. No Need For Tape And Glue Which Release Your Printing Anxiety. Easy To Remove The Prints Just Take Out The Pei Sheet And Slightly Flex It Repeatedly To Pop Your Prints Right Off..
Features
- Quality security Creality 100% official, made of high-quality spring steel, the flexible Steel PEI Sheet won't kink or warp when flex. It can stick well to the magnetic base, can resistant to 200 C and high strength no deformation. The soft Magnetic Sticker can withstand a long time of work with the heated bed at a high temperature of 70 C.
- Easy Adhere And Remove Easy to adhere the filaments to the printing bed. No need for tape and glue which release your printing anxiety. Easy to remove the prints just take out the PEI sheet and slightly flex it repeatedly to pop your prints right off.
- Wide Application The PEI Printing Surface can compatible with PLA, PETG, PEEK, ABS and any other filaments. Perfect printing size works well with Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE Ender 3 V3 K1 K1C, please remove the two positioning screws on the hotbed first.)
- Simple Installation Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question to find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #3
3D Printer Powder Painted PEI Flexi Steel Magnetic Build Plate 235 * 235mm for Creality Ender 3 S1 Pro,Ender 3,Ender 3 Pro,Ender 3 Neo,Ender 3 V2,Ender 3 V2 Neo, Ender 5,Ender 5 Pro
Asin: B09WZSGXFL | Model: CR-Power PEI-235mm | PartNumber: CR-Power PEI-235mm | Ean: 0747976885032 | UPC: 747976885032
Two-In-One Type Of Pei Powder Coated Hardended Steel Spring Sheet Nerver Disforming, Magnetic Base With Strong Magnetism.
No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety.
Easy To Install, Easy To Remove The Models By Bending Or Popping It Off.
Size: 235Mm X 235Mm..
Features
- Compatible with Ender 3, Ender 3 Pro, Ender 3X, Ender 3 V2, Ender 5 ,Ender 5 Pro ,CR 20 Pro. Aquila X2.
- Size: 235mm x 235mm.
- Two-in-one type of PEI powder coated hardended steel spring sheet nerver disforming, Magnetic base with strong magnetism
- Easy to install, easy to remove the models by bending or popping it off
- No more tape, no more glue, no more shovel, and release your printing anxiety
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 1.12 Pounds
See On Amazon #4
IdeaFormer-3D Smooth PEO+Textured PEI Spring Steel Build Plate 235x235mm, Double Sided PEO+PEI Heated Bed for Ender 3/Ender 3 V2/Ender 3 Pro/Neo/Ender 3 S1/Ender 3 S1 Pro/Neptune 3
Asin: B0BYD6C2RN
【High Durability】The Peo Printing Sheet Surface Is Resistant To High Temperatures Of 120°C And The Pei Coating Heated Bed Is 260°C..
【Easy Installation】Put The Peo+Pei Steel Sheet On The Hot Bed Of Your 3D Printer, And It Is Ready To Use. (This Spring Steel Plate Does Not Include Magnetic Build Plate.).
【Compatible 3D Printer 】The Peo+Pei Sheet Plate Fits The Size Of 235 X 235Mm, Such As For Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Neo, Cr20, Cr20 Pro, Ender 5, Ender 5 Pro, Mega Pro, Mega Zero, Kobra, Aquila, Aquila C2, Aquila S2, Aquila X2, Neptune 2, Neptune 2S, Neptune X, Neptune 3/3 Pro /4/4 Pro, Odin-5 F3 Etc..
【Compatible Filaments】Peo Printing Bed Surface Only Prints Pla Filaments; Pei Surface Sheet Most Filaments Such As Pla / Abs / Petg / Tpu / Nylon..
Features
- Smooth PEO+Textured PEI-No Magnetic Build Plate Double sided PEO+PEI heated bed platform produced using advanced technology. One is a smooth PEO printing bed surface, the underside of the printed model is smooth and the model is easy to remove and clean. The other side is PEI frosted bed surface, the textured surface presents a distinctive frosted touch, provides higher adhesion for the model and pressure without warping. There is no magnetic base.
- Compatible Filaments PEO printing bed surface only prints PLA filaments; PEI surface sheet most filaments such as PLA / ABS / PETG / TPU / nylon.
- High Durability The PEO printing sheet surface is resistant to high temperatures of 120 C and the PEI coating heated bed is 260 C.
- Compatible 3D Printer The PEO+PEI sheet plate fits the size of 235 x 235mm, such as for Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Neo, CR20, CR20 Pro, Ender 5, Ender 5 Pro, Mega Pro, mega zero, Kobra, Aquila, Aquila C2, Aquila S2, Aquila X2, Neptune 2, Neptune 2S, Neptune X, Neptune 3/3 Pro /4/4 Pro, Odin-5 F3 etc.
- Easy Installation Put the PEO+PEI steel sheet on the hot bed of your 3D printer, and it is ready to use. (This spring steel plate does not include magnetic build plate.)
- See more on Amazon...
Brand: IdeaFormer-3D | Manufacturer: Bell Tech
See On Amazon #5
HICTOP Double Sided PEI Sheet Smooth/Textured PEI bed and Magnetic build plate with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2 Ender-3 3D printers
Asin: B08PFJKW5J | Model: PEI | PartNumber: PEI
3 Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well, But The Temperature Of The Hotbed Needs To Be About 80-85℃.
5 The Size Of Hictop Pei Bed Is 235*235Mm（9.25*9.25Inch）, It Is Applicable With Creality 3D Printer Such As Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，Cr-20, Cr-20 Pro And Similarly Sized Machines..
4 Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Gentle Flexing Of The Plate Will Help Remove It..
2 The Hictop Textured Pei And The Smooth Pei Sheet Are Very Easy To Use, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top. The Maximum Temperature For Printing Is 120℃ On The Bed..
Features
- 1 The HICTOP double sided PEI sheet is combined with 2 parts, a flexible steel platform coated with textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.
- 2 The HICTOP textured PEI and the smooth PEI sheet are very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 120 on the bed.
- 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85
- 4 Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
- 5 The size of HICTOP PEI bed is 235*235mm 9.25*9.25inch , it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2 Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro CR-20, CR-20 Pro and similarly sized machines.
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
See On Amazon #6
POJECITY 3D Printer Textured PEI Spring Steel Sheet with Flexible Magnetic Sticker 235x235mm Surface for Aquila Ender 3, Pro, V2, S1, Ender 5, KP5M
Asin: B09MK7RHGW | Model: Y3 | PartNumber: Y3 | Ean: 0798107660202 | UPC: 798107660202
Easy To Install: Pei Spring Steel Sheet Made Of High Quality Stainless Steel And Strong Magnetic Base, Stick The Magnetic Base To Your Build Plate By Peeling Off The Backing Paper And Sticking It To Your Bed, Then Place The Steel Plate Onto The Magnetic Sheet. Keep The Side With Pei Facing Up To Print On. Please Peel Off The Protective Film On The Surface Before Printing..
We Have Applied Pei Sheet On The Build Plate By Machine, So You Don't Need To Worry About The Performance. If You Receive The Package But Find The Air Bubbles Or Scratches, They Are Only On The Surface And Won’T Effect Printing Performance. The Pei Is Textured, So Scratches Over Time From Printing Will Not Show Up In Your Print. The Textured Surface Leaves An Eye Catching, Professional Finish To Your Print..
When Printing Is Complete, Let The Pei Sheet Cool Down Enough (To Around 40C), Then Easily Remove The Prints. If The Print Is Still Stuck, Just Gently Bend The Steel Plate And Pop It Off! After Many Times Printings, Lightly Scour The Surface Of The Pei With Some Mild Steel Wool With 400 Grit Will Have Great Adhesion Or Use Alcohol To Clear It And Let It Dry..
High Quality Build Plate: The Custom-Designed Textured Pei Material Let’S Your Prints Easily Adhere To The Flexible Print Bed..
Features
- Size: Magnetic plate 235mmx235mm/9.2x9.2 inch for Ender 3, Ender 3 Pro, Ender 3 v2, Ender 3 S1, Longer LK4, LK4 Pro, and most other 235mm 3D printers.Note: it is single side, one side is textured,there is a logo on the palte,please be care.
- High quality build plate: The custom-designed textured PEI material let s your prints easily adhere to the flexible print bed.
- Easy to install: PEI spring steel sheet made of high quality stainless steel and strong magnetic base, stick the magnetic base to your build plate by peeling off the backing paper and sticking it to your bed, then place the steel plate onto the magnetic sheet. Keep the side with PEI facing up to print on. Please peel off the protective film on the surface before printing.
- When printing is complete, let the PEI Sheet cool down enough (to around 40C), then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off! After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.
- We have applied PEI sheet on the build plate by machine, so you don't need to worry about the performance. If you receive the package but find the air bubbles or scratches, they are only on the surface and won t effect printing performance. The PEI is textured, so scratches over time from printing will not show up in your print. The textured surface leaves an eye catching, professional finish to your print.
- See more on Amazon...
Brand: POJECITY | Manufacturer: k1
See On Amazon #7
BIQU SSS Ultra-Flexible Removable Spring Steel Build Plate Surface Heated Bed for Ender 3/Ender3 Pro/Ender3 V2/Ender3 S1/Ender3 S1 Pro/Ender3 V2 Neo/Ender3 Neo/Ender 5 Pro/K1 3D Printer 235x235MM
Asin: B088841XH9 | Model: KINGPRINT-WZC000350 | PartNumber: KINGPRINT-WZC000350 | Ean: 0778416923380 | UPC: 778416923380
【Strong Adhesion】After The Hot Bed Is Heated, The Model Is Stable On The Hot Bed,And Not Easy To Loose And Fall Off..
【Good Compatibility】Can Print A Variety Of Consumables, Such As Pla, Petg, Tpu, Abs, Etc..
【Easy To Use And Flexible】Has Certain Flexibility And Can Be Bent. After Cooling, The Model Is Loose And Easy To Take..
【Recommended Hot Bed Temperature When Using Petg】Petg: 60 ℃ Celsius To 80 ℃ Celsius (The Larger The Printed Model, The Higher The Hot Bed Temperature).
Features
- Recommended hot bed temperature when using PLA PLA: 45 Celsius to 55 Celsius (the larger the printing model, the higher the temperature of the hot bed)
- Recommended hot bed temperature when using PETG PETG: 60 Celsius to 80 Celsius (the larger the printed model, the higher the hot bed temperature)
- Strong Adhesion After the hot bed is heated, the model is stable on the hot bed,and not easy to loose and fall off.
- Easy to Use and Flexible Has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
- Good compatibility Can print a variety of consumables, such as PLA, PETG, TPU, ABS, etc.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.12 x 9.25 x 9.25 inches
See On Amazon #8
Double Side Textured PEI Sheet 235mmx235mm and Magnetic Sticker with Adhesive for Creality Ender 3(NEO)/Ender 3 Pro/Ender 3 V2(NEO) /Ender 3 S1(Pro) /Ender 5 S1 /Ender 5 (pro) 3D Printer Bed
Asin: B0C3WNM9CD | Model: PEI-235 | PartNumber: PEI-235 | Ean: 0741365796176 | UPC: 741365796176
✅【Wide Application】Compatible With Printing Area Below 235Mm Size Printers As Creality Ender 3/ Ender 3 Neo/ Ender 3 Pro/Ender 3 V2/ Ender 3 V2 Neo/ Ender3 S1/Ender 3 S1 Pro/ Ender 2/ Ender 5/ Ender 5 S1/ Ender 5 Pro/ Cr-20/ Cr-20 Pro/ Elegoo Neptune3 (Pro)/ Anycubic Kobra.,Etc.
✅【More Practical】We Use 75% Thicker Pei And 25% Thicker Spring Steel Than Our Leading Competitors. More Durable To Handle The Tough Conditions Of 24/7 Printing. Wear-Resistant And Scratch-Resistant, Easy To Clean,Also Anti-Scratch And Dustproof.
✅【100% Satisfaction Commitment】We Stand Behind The Quality Of Our Products. If For Any Reason You Are Not Satisfied With Your Purchase, Please Contact Us. We Provide 90-Day Money Back And 1 Year Warranty. 100% Satisfaction Guarantee For Risk-Free Shopping!.
✅【Enhance Printing Effect】Textured Pei Coating Would Make The Bottom Of Your Prints Show A Matte Texture And Retain The Frosted Feeling.Helps To Stick On The Bed More Firmly.Works For Most Fdm Materials In The Market, Like Pla, Pla+, Petg, Abs, Tpu, Asa, Nylon.
✅【Excellent Adhesion】Pei Coating Textured Surface On Both Side.Which Performs Excellent In Print Adhesion.Surface Temp Resistant Up To 120℃,Which Could Meet 99% Filament Material Needs..
Features
- EASY REMOVAL Contains PEI Sheet & Magnetic Sticker.Simply Install the PEI Sheet.designed for 3D prints easy removal. Self Release when Cooled Down, and flexible spring steel can be bent to peel off your prints.
- EXCELLENT ADHESION PEI Coating Textured surface on both side.which performs excellent in print adhesion.Surface Temp Resistant up to 120 ,which could meet 99% filament material needs.
- WIDE APPLICATION Compatible with Printing Area below 235mm size printers as Creality Ender 3/ Ender 3 Neo/ Ender 3 Pro/Ender 3 V2/ Ender 3 V2 Neo/ Ender3 S1/Ender 3 S1 pro/ Ender 2/ Ender 5/ Ender 5 S1/ Ender 5 Pro/ CR-20/ CR-20 Pro/ ELEGOO Neptune3 (Pro)/ Anycubic Kobra.,etc
- ENHANCE PRINTING EFFECT Textured PEI coating would make the bottom of your prints show a matte texture and retain the frosted feeling.helps to stick on the bed more firmly.works for most FDM materials in the market, like PLA, PLA+, PETG, ABS, TPU, ASA, Nylon
- MORE PRACTICAL We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. more durable to handle the tough conditions of 24/7 printing. Wear-Resistant and Scratch-Resistant, easy to clean,also anti-scratch and dustproof
- 100% SATISFACTION COMMITMENT We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 90-day money back and 1 YEAR warranty. 100% Satisfaction Guarantee for risk-free shopping!
- See more on Amazon...
First Available: 08/08/2023
Brand: FugaCity | Manufacturer: Fugacity LLC
Dimensions: 0.39 x 9.25 x 9.25 Inches | Weight: 1.01 pounds
Warranty: 180D Warranty & Free Return from date purchased
See On Amazon #9
Ender 3 Spring Steel PEI Bed Plate,Heat Resistance, Removable,Flexible,Magnetic Build Surface, with 235mm 235mm,Upgrade Replacemnt Parts for Creality Ender 3/Pro/V2/S1/Neo,Ender 5/Pro
Asin: B08B4CBY9C | Model: ENO-Ender3-PEI | PartNumber: ENO-Ender3-PEI | Ean: 0705300791732 | UPC: 705300791732
No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety.
When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
Easy To Adhere To The Printing Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off..
The Flexible Steel Pei Sheet Is Made Of High Quality Spring Steel That Won't Kink Or Warp When You Flex Them, They Just Return Back To Shape!.
Features
- Flexible, removable, can stick to magnetics very well. High strength and heat resistance. Suitable for Creality Ender 3/ Ender 3X/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender-3 S1/Ender-3 S1 Pro/Ender 5/Ender 5 Pro,CR20/pro etc.
- The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them, they just return back to shape!
- No more tape, no more glue, no more shovel, and release your printing anxiety
- Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.
- When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #10
ENOMAKER Ender 3 S1 Plus PEI Spring Steel Magnetic Bed Plate Powder Painted Textured PEI Removable Flexible Mat Build Surface for CR-10 Smart Pro, Ender 3 MAX,CR-10/S, K1 MAX(310X315mm)
Asin: B0BV6FHQ34 | Model: ENO-Single-Painted-PEI-315 | PartNumber: ENO-Single-Painted-PEI-315 | Ean: 0764481225955 | UPC: 764481225955
No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety..
When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
Frosted Glossy Pei Coated Surface, Easy To Adhere To The Printing Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off..
The Flex Spring Steel Pei Sheet Is Made Of High Quality Spring Steel That Won't Kink Or Warp When You Flex Them, They Just Return Back To Shape!.
Features
- Flexible, removable, can stick to magnetics very well. High strength and heat resistance.The size is 310*315mm(12.2*12.4inch), perfectly suitable for Ender 3 S1 Plus, CR-10 Smart,CR-10 Smart Pro, K1 MAX, also compatible for CR-10, CR-10S, Ender 3 MAX,,MP Maker Pro Long LK1/ PRO LK5 PRO, Hicto CR-10/Hero d3,A5 and A5x, Artilery Sidewinde X1,Tech FT-5,Elf CoreXY, SaiSmart CoreXY,Wahao D9 (300), Tenlog D3 PRO, Sulu S8,LK1/ PRO LK5 PRO or other similar size build plate, not the printing area.
- The flex spring steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them, they just return back to shape!
- No more tape, no more glue, no more shovel, and release your printing anxiety.
- Frosted glossy PEI coated surface, easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.
- When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3d print bed goes through from print to print.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #11
Shion.Kwoo 1PC Resin Flexible Spring Steel Build Plate 138x85mm (5.43X3.34inch) Flex Bed with Magnetic Sheet for Creality LD-002H 3D Printer.
Asin: B0CD7DNLC6
3.【Compatible Models】:The Resin Flexible Build Plate,138X85mm(5.43X3.34Inch),Compatible With Ld-002H 3D Printer.For The Suitable Models Not Mentioned, Please Measure In Advance Before Purchasing, Or You Can Contact Us At Any Time..
5.【Commitment】:We Have Our Own Factory, Directly Serve Consumers, And Strictly Test All Products Before Leaving The Factory. Considering The Long-Distance Transportation, If There Are Any Quality Problems, Please Feel Free To Contact Us, We Will Reply Promptly Within 12 Hours Within One Working Day, And Solve It For You..
4.【Packing List】: 1 Piece Resin Flexible Build Plate + 1 Piece Magnetic Sticker Base.There Is A Transparent Protective Film On The Surface, Which Needs To Be Torn Off Before Use, And Washed And Dried With Cleaning Agents Such As Alcohol..
2.【Installation Notes】:1.Thoroughly Clean And Dry The Build Plate Before Installation.2.Connect The Magnet To The Plate And Allow It To Sit For A Sufficient Period (Preferably More Than 24 Hours) To Ensure Full Seating.3.Install The Spring Steel Plate Securely Onto The Magnetic Base.4.Reset The Printer's Leveling Settings To Begin Printing..
Features
- 1. Easy to Use :No scraper, reusable after installation, the resin model can be directly removed by bending the flexible steel plate, using imported spring steel, better flatness and durability; The surface of the resin steel build plate is specially brushed to increase the surface viscosity; Thicken the 3M soft sticker to make the magnetic force stronger and should not be dropped.
- 2. Installation Notes :1.Thoroughly clean and dry the build plate before installation.2.Connect the magnet to the plate and allow it to sit for a sufficient period (preferably more than 24 hours) to ensure full seating.3.Install the spring steel plate securely onto the magnetic base.4.Reset the printer's leveling settings to begin printing.
- 3. Compatible Models :The resin flexible build plate,138x85mm(5.43X3.34inch),compatible with LD-002H 3D Printer.For the suitable models not mentioned, please measure in advance before purchasing, or you can contact us at any time.
- 4. Packing List : 1 piece resin flexible build plate + 1 piece magnetic sticker base.There is a transparent protective film on the surface, which needs to be torn off before use, and washed and dried with cleaning agents such as alcohol.
- 5. Commitment :We have our own factory, directly serve consumers, and strictly test all products before leaving the factory. Considering the long-distance transportation, if there are any quality problems, please feel free to contact us, we will reply promptly within 12 hours within one working day, and solve it for you.
- See more on Amazon...
Brand: Shion.Kwoo | Manufacturer: Shion.Kwoo
See On Amazon #12
165 x165mm PEI Spring Steel Build Plate Double Sided Textured PEI Sheet with Magnetic Bottom with Adhesive(6.5x6.5 inch) for Adventurer 3/Ender 2 pro/LulzBot Mini 2 Desktop 3D Printer.
Asin: B09TXMQYZS | Model: 202203051 | PartNumber: 202203051
【Good Quality】: Flexible, Removable, High Strength And Heat Resistance, Three-Layer Design, Thicker And More Durable. Easily Handle Temperatures Up To 130°C. And Perfect For Pla, Peek, Abs.Note:The Adaptation Temperature Of Different Materials Is Different, Please Adjust It Reasonably.
.
【Quality Promise】: All Products Have Undergone Quality Inspection Before Delivery. If You Have Any Questions About Product Quality And Suggestions, Please Feel Free To Contact Us And We Will Reply Within 24 Hours.
.
【Practical Features】:Size:165 X165mm/6.5X6.5 Inch Is Suitable For Adventurer 3/ Lulzbot Mini 2 Desktop And The Same Size Other 3D Printers.If You Are Not Sure, You Can Contact Us To Communicate And Confirm.
.
【Proven Solution】:No Glue, No Tap, When Hotbed Temperature Reaches 60℃ ,Materials Such As Pla Abs Will Stick Well, And After Printing, When Spring Steel Pei Build Plate Cools To Room Temperature, It's Easy To Remove The Printed Matter From The Platform By Bending Slightly. Through Hundreds Of Experimental Tests, Repeated Use Is Still As New.
.
Features
Special Design : Compared with smooth PEI, the design of flexible steel bed with Double Sided Textured PEI surface is excellent. The matte texture makes it easier for the printing material to adhere to the surface of PEI. Note: Please measure the size of your printing platform before purchasing. We are very grateful for your love and care for the product.
Proven Solution :No glue, No tap, when hotbed temperature reaches 60 ,materials such as PLA ABS will stick well, and after printing, when spring steel PEI build plate cools to room temperature, it's easy to remove the printed matter from the platform by bending slightly. Through hundreds of experimental tests, repeated use is still as new.
Good Quality : Flexible, removable, high strength and heat resistance, Three-Layer design, thicker and more durable. Easily handle temperatures up to 130 C. And perfect for PLA, PEEK, ABS.Note:The adaptation temperature of different materials is different, please adjust it reasonably.
Practical Features :Size:165 x165mm/6.5x6.5 inch is suitable for Adventurer 3/ LulzBot Mini 2 Desktop and the same size other 3D printers.If you are not sure, you can contact us to communicate and confirm.
Quality Promise : All products have UNDERGONE QUALITY INSPECTION before delivery. If you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours.
- See more on Amazon...
Brand: G-Hubble | Manufacturer: G-Hubble
Weight: 0.44 pounds
See On Amazon #13
Comgrow PEI Double Sided Magnetic Heated Bed, PEI Spring Steel 235x235mm, Smooth and Textured PEI Sheet for ELEGOO Neptune 3 Pro/4/Anycubic Kobra/Creality Ender 3/Ender 3 Pro/Ender 3 V2/3 V2 Neo
Asin: B09TVGDJYP
Wide Compatibility - If The Magnetic Sticker Is Stuck To The Bed, It Won't Be Easy To Remove. Therefore, Please Make Sure That Measure It Correctly First Before Removing The Adhesive And Stick To The 3D Printer Heated Bed. Suitable For Elegoo Neptune 3 Pro/Neptune 4/Neptune 4 Pro/Creality Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/Cr 20/ Cr 20 Pro/ Ender 5/ Ender 5 Pro 3D Printer. Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
High-Quality Material - When The Pei Bed Is Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
Easy Mode Lremoval - Easy To Adhere To The Printing Surface, The Ender 3 Pro Pei Bed Is Easy To Remove The Prints And Flex Slightly To Pop Your Print Right Off. The Flexible Surface Can Easily Be Cut To Any Dimension Making It Perfect For All Build Sizes And All Fdm Printer Models..
Wear Resistance - The Golden Yellow Matte Surface Of Pei Has Strong High-Temperature Stability And High Printing Stability. Our Pei Spring Steel 235X235mm Flame Retardant Has High-Temperature Resistance, High Strength, Wear Resistance, And Electrical Insulation Properties..
Features
- EXCELLENT FLATNESS - The smooth and flat surface is flexible and removable. The PEI sheet can stick to magnetics very well. High strength and heat resistance. (Note: Please remove the transparent protective film on the surface before use).
- WEAR RESISTANCE - The golden yellow matte surface of PEI has strong high-temperature stability and high printing stability. Our PEI spring steel 235x235mm flame retardant has high-temperature resistance, high strength, wear resistance, and electrical insulation properties.
- WIDE COMPATIBILITY - If the magnetic sticker is stuck to the bed, it won't be easy to remove. Therefore, please make sure that measure it correctly first before removing the adhesive and stick to the 3d printer heated bed. Suitable for ELEGOO Neptune 3 Pro/Neptune 4/Neptune 4 PRO/Creality Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro 3D Printer. Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- EASY MODE LREMOVAL - Easy to adhere to the printing surface, the ender 3 Pro PEI bed is easy to remove the prints and flex slightly to pop your print right off. The flexible surface can easily be cut to any dimension making it perfect for all build sizes and all FDM printer models.
- HIGH-QUALITY MATERIAL - When the pei bed is used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #14
Shion.Kwoo Upgraded Smooth/Textured PET+PEI Sheet 235x235mm Spring Steel Build Plate Magnetic Bed for Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro/CP-01/Cr-20/Cr 20 Pro/Voxelab Aquila 3D Printer.
Asin: B0CJ94VLGZ
【Usage Guidelines】: Attention Should Be Paid To The Nozzle-To-Surface Distance To Prevent Permanent Scars. Regular Cleaning With Alcohol Or A Cleaning Agent Is Recommended To Maintain Surface Cleanliness. Dirt And Oil Stains Can Reduce Print Adhesion And Affect The Clarity Of The Carbon Fiber-Like Pattern On The Pet Surface. In Extreme Conditions Such As Humid Filaments, Intricate Models, Or High-Speed Printing, Adjusting Speed And Increasing Bed Temp Are Recommended.
【Our Promise】: We Guarantee The Quality And Performance Of Our Double-Sided Textured Pet+Pei Printing Plate. Your Queries And Suggestions Are Our Priority, And We Promise A Prompt Response Within 24 Hours. Thank You For Choosing Our Product. Our Team Is Ready To Assist You With Personalized Services Tailored To Your Unique Requirements Through The Platform's Messaging System..
【Wide Printer Compatibility】: Compatible With Creality Ender 3 V2 Ender 3 Pro Ender 5 Ender 5 Pro Cp-01 Cr-20 Cr 20 Pro Voxelab Aquila 3D Printers. If You're Uncertain, Feel Free To Contact Us Directly For Assistance. As Both Manufacturers And Printing Enthusiasts, We Use Our Own Products For Printing And Creative Work. We Believe That A Scientific Approach Enhances Both Print Quality And The Joy Of The Process; However, It's Not Magic Or Mythology..
【Premium Materials】: In Addition To Acquiring Thick Pet Film And Our Proprietary High-Adhesion Pei Formula, We Use A 0.4Mm Thick Stainless Steel Plate That Is Resistant To Deformation And Rust. With High Flatness And Ample Toughness, It Provides Strong Adhesion, Making It Extremely User-Friendly. We Have Extensively Tested And Verified The Results On Various Machines..
Features
- Product Features : For the PET+PEI steel plate, the PET surface exhibits a pattern resembling carbon fiber. The intersection of gloss and matte surfaces forms a striped pattern, creating a three-dimensional and orderly print surface with a distinctive texture. It can withstand temperatures up to 120 C, making it ideal for low-temp filaments like PLA and PETG. The PEI coating presents a delicate matte texture, exuding a calm and stable quality for ABS, with a high-temp resistance of up to 300 C.
- Premium Materials : In addition to acquiring thick PET film and our proprietary high-adhesion PEI formula, we use a 0.4mm thick stainless steel plate that is resistant to deformation and rust. With high flatness and ample toughness, it provides strong adhesion, making it extremely user-friendly. We have extensively tested and verified the results on various machines.
- Usage Guidelines : Attention should be paid to the nozzle-to-surface distance to prevent permanent scars. Regular cleaning with alcohol or a cleaning agent is recommended to maintain surface cleanliness. Dirt and oil stains can reduce print adhesion and affect the clarity of the carbon fiber-like pattern on the PET surface. In extreme conditions such as humid filaments, intricate models, or high-speed printing, adjusting speed and increasing bed temp are recommended
- Wide Printer Compatibility : Compatible with Creality Ender 3 V2 Ender 3 Pro Ender 5 Ender 5 Pro CP-01 Cr-20 Cr 20 Pro Voxelab Aquila 3D Printers. If you're uncertain, feel free to contact us directly for assistance. As both manufacturers and printing enthusiasts, we use our own products for printing and creative work. We believe that a scientific approach enhances both print quality and the joy of the process; however, it's not magic or mythology.
- Our Promise : We guarantee the quality and performance of our double-sided textured PET+PEI printing plate. Your queries and suggestions are our priority, and we promise a prompt response within 24 hours. Thank you for choosing our product. Our team is ready to assist you with personalized services tailored to your unique requirements through the platform's messaging system.
- See more on Amazon...
Brand: Shion.Kwoo | Manufacturer: Shionkwoo
See On Amazon #15
KINLUOT PETG Filament 1.75mm Clear 3D Printer Filament, Easy to Print, Dimensional Accuracy +/- 0.03 mm, 1kg Cardboard Spool (2.2lbs), Fit Most FDM Printer (Transparent)
Asin: B09VWXVNQ4 | Model: X00PETG | PartNumber: X00PETG
【Clog&Bubble-Free】Completely Dried For 24 Hours Before Packaging, And Please Keep It Dry And Dust-Free After After Opening The Sealed Package To Prevent It Becomes Brittle Or Jams The Nozzle..
【Printing Tips】Net Weight：1Kg(2.2Lbs)，Total Length：320（±10M），Nozzle Temp：230~250℃ (446℉~ 482℉)，Bed Temp：80~90℃ (176℉~ 194℉)，Printing Speed：30~60Mm/S..
【Wide Compatibility】Full Mechanical Winding And Strict Manual Examination, Which Guarantee The Petg Filaments Tidy And Easy To Be Fed. Works And Harmonizes Perfectly With All Common 1.75Mm Fdm 3D Printers..
【Premium Petg Filament】These Tough Kinluot Petg Filaments To Be Strict Tolerances. Diameter 1.75Mm, Dimensional Accuracy + / - 0.03 Mm, 1 Kg Spool (2.2Lbs)..
Features
- High Toughness and Purity Material KINLUOT PETG 3D filament has the advantages of high toughness and purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects.
- Premium PETG Filament These Tough KINLUOT PETG Filaments to be Strict Tolerances. Diameter 1.75mm, Dimensional Accuracy + / - 0.03 mm, 1 KG Spool (2.2lbs).
- Clog&Bubble-Free Completely dried for 24 hours before packaging, And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle.
- Wide Compatibility Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. Works and Harmonizes Perfectly with all Common 1.75mm FDM 3D Printers.
- Printing Tips Net Weight 1kg(2.2lbs) Total length 320 10m Nozzle Temp 230~250 (446 ~ 482 ) Bed Temp 80~90 (176 ~ 194 ) Printing Speed 30~60mm/s.
- See more on Amazon...
Brand: KINLUOT | Manufacturer: KINLUOT
Weight: 2.20 pounds
See On Amazon #16
BIQU Upgrade SSS Spring Steel Sheet with Magnetic Sticker, 235X235MM Ultra-Flexible Removable Surface Heated Bed Platform 3D Printer Parts Printing Build Plate for Ender 3/Ender3 Pro/Ender 5/B1
Asin: B08G1BN1BK | Model: BIQU SSS | PartNumber: BIQU SSS | Ean: 0779303890228 | UPC: 779303890228
❤【Easy To Use And Flexible】The Sss Heated Bed Surface Has Certain Flexibility And Can Be Bent. After Cooling, The Model Is Loose And Easy To Take..
❤【12 Months Longer Warranty】Package Include: 1X Sss Spring Steel Sheet. 1X Magnetic Sticker. Strict Testing For All Components Before Delivery.Thank You Very Much For Your Choice And Trust. If You Have Any Questions About The Product, Can You Contact Us First? Give Us The Opportunity To Understand Your Needs, And We Will Do Our Best To Answer Questions And Solve Problems For You..
❤【Strong Adhesion】After The Hot Bed Is Heated, The Model Is Stable On The Hot Bed,And Not Easy To Loose And Fall Off. The Surface Of The Build Plate Is Wear-Resistant, And The Coating Is Not Easy To Wear..
❤【Applicable Filaments Types】The Heated Bed Platform Can Print A Variety Of Filaments, Such As Pla, Petg, Tpu, Abs, Etc. The High-Temperature-Resistant Spring Steel Plate Can Withstand Temperatures Above 200°..
Features
- APPLICABLE PRINTER MODEL The size of the spring steel sheet is 235x235mm, which is suitable for any 3D printer with a printing platform size of 235*235mm. Such as Ender 3/Ender 3X /Ender 3 Pro/Ender 3 Prox/Ender 5 /Ender 5 Pro /BIQU B1 etc.
- APPLICABLE FILAMENTS TYPES The Heated Bed Platform can print a variety of filaments, such as PLA, PETG, TPU, ABS, etc. The high-temperature-resistant spring steel plate can withstand temperatures above 200 .
- EASY TO USE AND FLEXIBLE The SSS Heated bed Surface has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
- STRONG ADHESION After the hot bed is heated, the model is stable on the hot bed,and not easy to loose and fall off. The surface of the build plate is wear-resistant, and the coating is not easy to wear.
- 12 MONTHS LONGER WARRANTY Package include: 1X SSS Spring Steel Sheet. 1X Magnetic sticker. Strict testing for all components before delivery.Thank you very much for your choice and trust. If you have any questions about the product, can you contact us first? Give us the opportunity to understand your needs, and we will do our best to answer questions and solve problems for you.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIGTREETECH
Dimensions: 0.00 x 9.25 x 9.25 Inches
See On Amazon #17
ENOMAKER Double Sided Magnetic Spring Steel Flex Plate Bed Sheet PC PET Build Surface for Creality Ender 3 Pro V2 S1 Neo 3D Printer Heated Platform,Printing ABS PLA,Removable Flexible Mat (235x235mm)
Asin: B0B8S5D2MV | Model: ENO-PCPET-Steel-Bed | PartNumber: ENO-PCPET-Steel-Bed | Ean: 0764481225542 | UPC: 764481225542
【Easy To Remove Models】No Need For Tape, Glue, Or Removing Tools Anymore. When The Heated Bed Reaches Room Temperature, Just Peel Off The Top Steel Plate From The Bottom Magnetic Plate, And Flex Slightly To Pop Your Prints Right Off..
If You Have Any Questions During Installation Or Use, Our Technical Support Will Provide You With A Detailed Solution Within 24 Hours..
【Compatibility】The Plate Size Is 235X235mm(9.25X9.25Inch), It Perfectly Compatible With Ender 3, Ender-3 Pro, Ender3 V2, Ender3 V2 Neo, Ender 3 S1, Ender 3 S1 Pro,Ender 5, Ender 5 Pro, Cr-20, Cr-20 Pro, Cp-01, Voxelab Aquila/C2/X2, And Similar Size Platform Bed..
【Good Adhesion】Double Sided Texture Bed Surface, Abs With A Grained Surface, Pla With Brushed Surface, To Meet Your Different Print Needs. Make The Models Can Be Firmly Attached To The Surface, And Print Without Warped Edges..
Features
- New PC/PET Spring Steel Plate Removable, flexible, magnetic heated bed surface. Heat resistance, bends thousands of times and without deformation. Double-sided with different texture surfaces, specially designed for printing PLA filament or ABS high temp printing filament.
- Good Adhesion Double sided texture bed surface, ABS with a grained surface, PLA with brushed surface, to meet your different print needs. Make the models can be firmly attached to the surface, and print without warped edges.
- Easy to Remove Models No need for tape, glue, or removing tools anymore. When the heated bed reaches room temperature, just peel off the top steel plate from the bottom magnetic plate, and flex slightly to pop your prints right off.
- Compatibility The plate size is 235x235mm(9.25x9.25inch), it perfectly compatible with Ender 3, Ender-3 Pro, Ender3 V2, Ender3 V2 Neo, Ender 3 S1, Ender 3 S1 Pro,Ender 5, Ender 5 Pro, CR-20, CR-20 Pro, CP-01, Voxelab Aquila/C2/X2, and similar size platform bed.
- If you have any questions during installation or use, our technical support will provide you with a detailed solution within 24 hours.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #18
Wefuit Smooth PEO+Textured PEI Spring Steel Build Plate 235x235mm, Double Sided PEO+PEI Heated Bed for Adventurer 5M/Neptune 3 Pro/Neptune 4/Ender 3/Ender 3 V2/Ender 3 Pro/Neo/Ender 3 S1 3D Printer.
Asin: B0CXCVKRBW
【Excellent Adhesion For First Printing Layer】The Model Can Be Firmly Attached To The Surface Of The Print Bed.Easily Print Even For A Newbie.Please Let The Build Plate Cool Down Before Remove The Model To Avoid Damaging The Coating..
【Compatible 3D Printers】The Double-Sided Smooth Peo+ Textured Pei Print Bed Suitable For 3D Printers With 235X235mm Platform Size, Such As Suitable For Ender 3/Ender 3 Pro/Ender 3 V2/3 V2 Neo/3 Neo/Ender 3 S1/3 S1 Pro/Neptune 3 Pro/Neptune 4 /Ender 5 Pro . Please Confirm Your 3D Printer Platform Size Before Ordering..
【High Resistance And Compatible Filaments】The Peo Print Bed Surface Is Resistant To High Temperature 150°C And Textured Pei Coating Bed Is 300℃,After Our Extensive Testing, We Recommend Peo To Print Pla / Tpu /Petg，If You Want To Print Other Filaments, Please Adjust The Parameters. And It Is Good To Print Pla/Pla+/Petg/Petg-Cf/Abs/Tpu/Nylon/Pc/Pa/Asa/Pva On Pei Surface..
【 Easy To Remove And Use】The Spring Steel Sheet Can Be Bent To Remove The Model Quickly, Without The Help Of Other Tools. And The Plate Will Return To Flatness. Made Of High Quality Spring Steel Plate. Flexible, Removable, High Strength And Heat Resistance, Dual-Side Design, Thicker And More Durable. Easy To Use, Put The Printing Plate Onto The Lab Printer Hot Bed, Then The Print Bed Levelling Will Automatically Go On While Machine Powered On. (The Smooth Surface Has A Factory Protective Film).
Features
- PEO+PEI build plate Double-sided PEO+PEI spring steel plate .One side is Smooth PEO it looks like countless diamonds on the surface,which make your eyes light up.The other side is texture PEI.It is like fine sand on a golden beach, very durable and resistant to high temperatures.It has been popular for a few years and remains a favorite among 3D printer enthusiasts.One build plate has two beautiful patterns. The bottom of the prints will leave a unique pattern.
- Easy to Remove and use The spring steel sheet can be bent to remove the model quickly, without the help of other tools. And the plate will return to flatness. Made of high quality spring steel plate. Flexible, removable, high strength and heat resistance, dual-side design, thicker and more durable. Easy to use, put the printing plate onto the lab printer hot bed, then the print bed levelling will automatically go on while machine powered on. (The smooth surface has a factory protective film)
- Excellent adhesion for first printing layer The model can be firmly attached to the surface of the print bed.Easily print even for a newbie.Please let the build plate cool down before remove the model to avoid damaging the coating.
- High Resistance and Compatible Filaments The PEO print bed surface is resistant to high temperature 150 C and textured PEI coating bed is 300 ,After our extensive testing, we recommend PEO to print PLA / TPU /PETG If you want to print other filaments, please adjust the parameters. And It is good to print PLA/PLA+/PETG/PETG-CF/ABS/TPU/Nylon/PC/PA/ASA/PVA on PEI surface.
- Compatible 3D Printers The double-sided smooth PEO+ textured PEI print bed suitable for 3D printers with 235x235mm platform size, such as suitable for Ender 3/Ender 3 Pro/Ender 3 V2/3 V2 Neo/3 Neo/Ender 3 S1/3 S1 Pro/Neptune 3 Pro/Neptune 4 /Ender 5 pro . Please confirm your 3D printer platform size before ordering.
- See more on Amazon...
Brand: Wefuit | Manufacturer: Wefuit
See On Amazon #19
PEI Sheet Magnetic Flexible Heated Bed 200x300mm Double Sided Spring Steel Sheet
Asin: B0C98MTQFB | Model: FTVOGUEmzfqdiv28r | PartNumber: FTVOGUEmzfqdiv28r
Strong Adhesion: Excellent Adhesion Is Achieved At 60℃ And Both Sides Of The Double Sided Pei Sheet Can Be Printed Without Glue.
Easy Removal: Powder Painted Pei Spring Steel Sheet, Easy To Install And Remove By Bending Or Popping Off..
Easy To Use: Double Sided Pei Spray Build Plate, Both Sides Can Be Printed, Just Put On The Heating Bed, Tear Off The Protective Film And Print Directly.
Frosted Printing Effect: The Surface Adhesion Of Spring Steel Build Plate Is Strong, No Glue Is Needed, Cold Printing Can Be Achieved, And No Warping Edge, The Bottom Surface Of The Printed Product With Frosted Effect, Fine And Beautiful.
Features
- NO EDGE CURLING : You do not need to worry about the print out curling at 60 bed temperature, spring steel build plate will print PETG well, but the hotbed temperature needs to be around 80 85
- FROSTED PRINTING EFFECT: The surface adhesion of spring steel build plate is strong, no glue is needed, cold printing can be achieved, and no warping edge, the bottom surface of the printed product with frosted effect, fine and beautiful
- STRONG ADHESION: Excellent adhesion is achieved at 60 and both sides of the double sided PEI sheet can be printed without glue
- EASY TO USE: Double sided PEI spray build plate, both sides can be printed, just put on the heating bed, tear off the protective film and print directly
- EASY REMOVAL: Powder painted PEI spring steel sheet, easy to install and remove by bending or popping off.
- See more on Amazon...
Brand: FTVOGUE | Manufacturer: FTVOGUE
See On Amazon #20
CCTREE Ender 3 PEI Bed Plate Spring Steel Sheet Magnetic Mat, 235x235mm Double-Side Smooth/Textured Flexible Build Surface for Creality Ender 3/Pro/V2/S1/S1 PRO, Ender 5/Pro, K1 Platform
Asin: B0B8VWCYMZ | Model: CC-ST PEI-235MM | PartNumber: CC-ST PEI-235MM | Ean: 0738627014994 | UPC: 738627014994
【Excellent Adhesion】: Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double-Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature. It Also Can Print Petg Very Well, But The Temperature Of The Hotbed Needs To Be About 80-85℃.
【Easy Removal】:His Surface Is Easily Removed And Flexible. Prints Come Off The Surface Easily When The Heated Bed Temperature Reaches Room Temperature. If The Print Is Still Stuck, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface, And Watch The Model Fall Right Into Your Hands..
【Compatibility】The Size Of The Pei Sheet Is 235*235Mm(9.2519685*9.2519685 In), It Is Suitable For Ender 3 Series, Ender 5/Pro, Cr 20/Pro, Mega Pro, Kobra, Aquila/C2/S2/X2, Odin-5 F3, Neptune X/2/2S, Mingd D2, Lk4 / Lk4 Pro, B1, A10m/A10t, And Other 3D Printers. If Your 3D Printer Has A 235X235mm Heat Bed Platform, This Pei Sheet Is Compatible With Your 3D Printer..
【Textured/Smooth Double-Sided Pei】:Our Double-Sided Pei Flex Plate Features One Powder-Coated Pei Surface That Leaves A Textured Matte Finish On Your Parts And One Smooth Pei End That Leaves A Glossy, Reflective Finish On The Bottom Of Your Interests!.
Features
- Simple Installation Stick the soft magnetic base to the heating bed of your 3D printer then put the stacked PEI steel foil platform on top and you are ready to use. the PEI surface sticks to the magnet almost too well, it makes it so easy to switch between smooth bottom surfaces and textured bottom surfaces.
- Textured/Smooth Double-Sided PEI :Our double-sided PEI flex plate features one powder-coated PEI surface that leaves a textured matte finish on your parts and one smooth PEI end that leaves a glossy, reflective finish on the bottom of your interests!
- Excellent Adhesion : Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double-sided PEI sheet without using any glue or other tools to help the model stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85
- Compatibility The size of the PEI sheet is 235*235mm(9.2519685*9.2519685 in), It is suitable for Ender 3 series, Ender 5/Pro, CR 20/Pro, Mega Pro, Kobra, Aquila/C2/S2/X2, Odin-5 F3, Neptune X/2/2S, Mingd D2, LK4 / LK4 Pro, B1, A10M/A10T, and other 3D printers. If your 3D printer has a 235x235mm heat bed platform, This PEI sheet is compatible with your 3D printer.
- Easy Removal :his surface is easily removed and flexible. Prints come off the surface easily when the heated bed temperature reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- See more on Amazon...
Brand: CCTREE | Manufacturer: CCTREE
See On Amazon
Looking For Something Else?
Search