165 x165mm PEI Spring Steel Build Plate Double Sided Textured PEI Sheet with Magnetic Bottom with Adhesive(6.5x6.5 inch) for Adventurer 3/Ender 2 pro/LulzBot Mini 2 Desktop 3D Printer.
Asin: B09TXMQYZS | Model: 202203051 | PartNumber: 202203051
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Good Quality】: Flexible, Removable, High Strength And Heat Resistance, Three-Layer Design, Thicker And More Durable. Easily Handle Temperatures Up To 130°C. And Perfect For Pla, Peek, Abs.Note:The Adaptation Temperature Of Different Materials Is Different, Please Adjust It Reasonably.
.
【Quality Promise】: All Products Have Undergone Quality Inspection Before Delivery. If You Have Any Questions About Product Quality And Suggestions, Please Feel Free To Contact Us And We Will Reply Within 24 Hours.
.
【Practical Features】:Size:165 X165mm/6.5X6.5 Inch Is Suitable For Adventurer 3/ Lulzbot Mini 2 Desktop And The Same Size Other 3D Printers.If You Are Not Sure, You Can Contact Us To Communicate And Confirm.
.
【Proven Solution】:No Glue, No Tap, When Hotbed Temperature Reaches 60℃ ,Materials Such As Pla Abs Will Stick Well, And After Printing, When Spring Steel Pei Build Plate Cools To Room Temperature, It's Easy To Remove The Printed Matter From The Platform By Bending Slightly. Through Hundreds Of Experimental Tests, Repeated Use Is Still As New.
.
Features
Special Design : Compared with smooth PEI, the design of flexible steel bed with Double Sided Textured PEI surface is excellent. The matte texture makes it easier for the printing material to adhere to the surface of PEI. Note: Please measure the size of your printing platform before purchasing. We are very grateful for your love and care for the product.
Proven Solution :No glue, No tap, when hotbed temperature reaches 60 ,materials such as PLA ABS will stick well, and after printing, when spring steel PEI build plate cools to room temperature, it's easy to remove the printed matter from the platform by bending slightly. Through hundreds of experimental tests, repeated use is still as new.
Good Quality : Flexible, removable, high strength and heat resistance, Three-Layer design, thicker and more durable. Easily handle temperatures up to 130 C. And perfect for PLA, PEEK, ABS.Note:The adaptation temperature of different materials is different, please adjust it reasonably.
Practical Features :Size:165 x165mm/6.5x6.5 inch is suitable for Adventurer 3/ LulzBot Mini 2 Desktop and the same size other 3D printers.If you are not sure, you can contact us to communicate and confirm.
Quality Promise : All products have UNDERGONE QUALITY INSPECTION before delivery. If you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours.
- See more on Amazon...
Brand: G-Hubble | Manufacturer: G-Hubble
Weight: 0.44 pounds
See On Amazon Similar To 165 x165mm PEI Spring Steel
#1
Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface
Asin: B092ZVTJSK | Model: 001 | PartNumber: 001 | Ean: 0752004396282 | UPC: 752004396282
【Wide Application】The Pei Printing Surface Can Compatible With Pla, Petg, Peek, Abs And Any Other Filaments. Perfect Printing Size Works Well With Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To Be Compatible With Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke Ender 3 V3 K1 K1c, Please Remove The Two Positioning Screws On The Hotbed First.).
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" To Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Simple Installation】Just Need To Place The Bottom 3M Adhesive Surface On Top Of The No-Heated Bed. The Steel Pei Plate Can Be Magnetically Bonded To The Magnetic Sticker. If It Fails To Adsorb, Please Rotate It 90 Degrees And Try Again..
【Easy Adhere And Remove】 Easy To Adhere The Filaments To The Printing Bed. No Need For Tape And Glue Which Release Your Printing Anxiety. Easy To Remove The Prints Just Take Out The Pei Sheet And Slightly Flex It Repeatedly To Pop Your Prints Right Off..
Features
- Quality security Creality 100% official, made of high-quality spring steel, the flexible Steel PEI Sheet won't kink or warp when flex. It can stick well to the magnetic base, can resistant to 200 C and high strength no deformation. The soft Magnetic Sticker can withstand a long time of work with the heated bed at a high temperature of 70 C.
- Easy Adhere And Remove Easy to adhere the filaments to the printing bed. No need for tape and glue which release your printing anxiety. Easy to remove the prints just take out the PEI sheet and slightly flex it repeatedly to pop your prints right off.
- Wide Application The PEI Printing Surface can compatible with PLA, PETG, PEEK, ABS and any other filaments. Perfect printing size works well with Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE Ender 3 V3 K1 K1C, please remove the two positioning screws on the hotbed first.)
- Simple Installation Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question to find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #2
Gizmo Dorks PEI Sheet 12" x 12" (305mm x 305mm) 1mm Thick 3D Printer Build Surface Ultem 1000, Made in The USA
Asin: B074XG1NDM | Model: GD-POLYPEI-12x12 | PartNumber: GD-POLYPEI-12x12 | Ean: 0887503180718 | UPC: 887503180718
Remove Film From Both Sides Before Using: Blue Protective Film Guards Against Scratches During Shipping And Handling..
Sheet Can Be Easily Cut Down To Desired Size By Scoring With A Utility Knife.
Reuse For Multiple Prints, Just Wipe Down With Isopropyl Alcohol Between Prints For Best Results.
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry..
Features
- MADE IN THE USA: Single 1mm thick sheet installs quickly on top of existing flat build platforms (e.g. borosilicate glass)
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
- REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling.
- Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
- Sheet can be easily cut down to desired size by scoring with a utility knife
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.04 x 12.00 x 12.00 inches
See On Amazon #3
FYSETC 3D Printer Vorn 2.4 350mm Build JanusBPS PEI Sheet 355x355mm/13.9x13.9inch Flexible Spring Steel Sticker Build PlateTextured - Smooth Double Sided Removable Heated Bed Cover Kit for Vorn v2.4
Asin: B09GYB7B2C
Easy To Use, Simply Stick The Sticker Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform On The Top.Both Sides Can Be Used To Print, Convenient. The Pei Sheet Is Pre-Sticked By Machine, No Need Worry About Bubbles. Please Peel Off The Profective Film On It Before Using..
The Flexible Steel Pei Sheet Is Made Of High Quality Spring Steel That Won't Kink Or Warp When You Flex Them Slightly! Easy To Adhere To The Printing Surface, Easy To Remove The Prints. Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Gentle Flexing Of The Plate Will Help Remove It..
Most Filaments, Such As Pla, Petg, Can Print Directly On To The Pei Surface Without The Need For Additional Adhesives, Tapes Or Slurry. Kindly Note Printing Abs Needs A Thermal Insulation Environment..
Flexible, Removable, Can Stick To Sticker Very Well. High Strength And Heat Resistance, Apply To The Same Size Vorn 2.4 Printer--350 V2, Sovl Sv03 (Please Measure Your Build Plate Before Ordering,Not Rely On Bulid Volume)..
Features
- A upgrade Replacement printing platform JanusBPS-Build Plate Sheet 355mm/13.9 inch. This JanusBPS kit is one side with Gold Powder, another with a Smooth PEI, comes with a soft sticker base with strong adhesive.
- Flexible, removable, can stick to sticker very well. High strength and heat resistance, apply to the same size Vorn 2.4 printer--350 V2, Sovl SV03 (Please measure your build plate before ordering,not rely on bulid volume).
- Easy to use, simply stick the sticker bottom sheet onto your heated bed, then place the steel platform on the top.Both sides can be used to print, convenient. The pei sheet is pre-sticked by machine, no need worry about bubbles. Please peel off the profective film on it before using.
- Most filaments, such as pla, petg, can print directly on to the pei surface without the need for additional adhesives, tapes or slurry. Kindly note printing ABS needs a thermal insulation environment.
- The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! Easy to adhere to the printing surface, easy to remove the prints. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #4
FYSETC 3D Printer Platform 165mm x 165mm Flexible Build Plate - Removable Print Bed Accessories - Magetic Hotbed Printing Surface with Adhesive Sticker for PLA PLA+ Only Fit Ender 2 Pro DaVince Mini
Asin: B0CM9HWDSQ
Easy To Install: Comes Two Part-With A Magnetsheet To Stick On The Bed (No Need Clips, You Decide It) And Also The Removal Top Magetic Sheet To Print On! Check To Make Sure You Have The Correct Orientation Of The Build Surface On The Maget Before Application And This Isn't A Problem. Adjust The Bed Leveling Again After Installing..
Needed Upgrade Replacement Pad: Before You Even Try To Level Your Machine With This New Bed... Please Make Sure You Adjust Your Z Stop To Avoid Your Nozzle From Digging Into Your Bed.. Yes Brass Nozzle On The Soft Top Will Indeed Damage Your Bed Instantly..
Easy To Remove (Pla Pla+ Only): No Glue, No Print Residue, No Clips, Easy To Clean, Fantastic Adhesion, But Best Of All Is The Prints Are Very Easy To Remove..
No Need Glue Stick Or Hairspraayy: This Was A Great Upgrade Parts To Your Original Surface: No Need Glue Stick Or Other Adhesive, Works Good For Small Prints And Pla Filament. Only Great For Pla Pla+ Wood Material (50-75℃/ 122-167℉), Please Don't Use It To Print Petg Asa Or Abs. Because The Surface Is Made Of Plastic, Can Not Stand Too High Temperature, Also It Sticks Too Well And Tends To Damage The Bed..
Features
- Size 165mm x 165mm / 6.5 x 6.5 , Fits: CrealityEnder 2 - Ender 2 Pro - DaVincii Mini May fit: Wanhao i3 Mini - TronxyX1 - TevoMichelangelo - Zonesta Z6F - Qiditech X-one2 - FlashforgeAdventurer 3 - Adventurer3 Lite - Finder3d printer. please measure your real heat bed, if you can accept 5-10mm, then get it.
- No need glue stick or hairspraayy: This was a great upgrade parts to your original surface: no need glue stick or other adhesive, works good for small prints and pla filament. only Great for PLA PLA+ Wood material (50-75 / 122-167 ), please don't use it to print PETG ASA or ABS. because the surface is made of plastic, can not stand too high temperature, also it sticks too well and tends to damage the bed.
- Easy to install: Comes two part-with a magnetsheet to stick on the bed (no need clips, you decide it) and also the removal top magetic sheet to print on! Check to make sure you have the correct orientation of the build surface on the maget before application and this isn't a problem. Adjust the bed leveling again after installing.
- Easy to remove (PLA PLA+ only): No glue, no print residue, no clips, easy to clean, fantastic adhesion, but best of all is the prints are very easy to remove.
- Needed upgrade replacement pad: Before you even try to level your machine with this new bed... PLEASE make sure you adjust your Z stop to avoid your nozzle from digging into your bed.. yes brass nozzle on the soft top will indeed damage your bed instantly.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #5
FLSUN SR 3D Printer Parts Hot Bed Double Sided Textured PEI Powder Coated Spring Steel Sheet 265 x 265 mm + Magnetic Adhesive Side B
Asin: B0B8YXBRS1 | Model: SR-PEI | PartNumber: SR-PEI | Ean: 0717981619649 | UPC: 717981619649
Excellent Performance; Removable,Flexible,Can Stick To Magnetic Very Well,High Strength And Heat Resistance.Excellent Adhesion,Easy To Install,Excellent Flatness..
Responsible After-Sales Service And Lifetime Technical Support; If You Have Any Problems About Product, Please Press "Ask A Question" Through Our Storefront's Page, Report An Issue Through The “Your Orders” Page. We Will Respond With 24 Hours..
Reuse For Multiple Prints; Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
Easy To Adhere And Remove; Easy To Adhere To The Printing Surface, Easy To Remove The Prints,Prints Can Be Easily Removed By Hand When The Build Surface Cooled, Gentle Flexing Of The Plate Will Help Remove It..
Features
- Item Size; diameter 265mm / 10.43 Inch, it is only applicable with FLSUN SR Super Racer.
- Easy to adhere and Remove; Easy to adhere to the printing surface, easy to remove the prints,Prints can be easily removed by hand when the build surface cooled, gentle flexing of the plate will help remove it.
- Excellent Performance; Removable,flexible,can stick to magnetic very well,high strength and heat resistance.Excellent adhesion,easy to Install,excellent flatness.
- Reuse for multiple prints; PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
- Responsible After-Sales Service and Lifetime Technical Support; If you have any problems about product, Please press Ask a question through our storefront's page, report an issue through the Your Orders page. We will respond with 24 hours.
- See more on Amazon...
Brand: FLSUN | Manufacturer: FLSUN
Weight: 0.66 pounds
See On Amazon #6
3D Printer Build Plate 150x150mm Double Sided PEI Powder Sprayed Magnetic Spring Steel Flexible for Voron Models
Asin: B0C6R7D8HK | Model: Hyuduov1q3bhyfik | PartNumber: Hyuduov1q3bhyfik
Double Sided Pei Powder: The Spring Steel Plate Is Flexible And Has Good Flatness Sprayed With Double Sided Pei Powder With A Frosted Texture Anti Wear And Not Easily Scratched.And The Service Life Is Twice That Of A Single Side..
Strong Adhesion: This 3D Printer Built Plate Features Strong Surface Adhesion Force And Does Not Require Any Glue For Adhesion Enables Cold Printing Creating Perfect Products With No Warping..
Magnetic Base: With A Magnetic Base With A Soft Texture And Good Magnetic And Temperature Resistance With Adhesive Backing Can Be Directly Attached To The Hot Bed Platform And Can Withstand High Temperature..
Multi Purpose: The Steel Plate With Pei Powder Coating Can Adhere To Various Printing Materials Such As Pla Abs Tpu Tetg And Nylon With A Temperature Resistance Up To 200℃.Magnetic Steel Combination With Ear Design Easy To Remove And Easy To Remove By Gently Bending The Steel Plate..
Features
- WIDE COMPATIBILITY: The 3D printer build plate with a size of 150x150MM is compatible with most 3D printer models. Please ensure that your printer platform is compatible with this size.
- MULTI PURPOSE: The steel plate with PEI powder coating can adhere to various printing materials such as PLA ABS TPU TETG and nylon with a temperature resistance up to 200 .Magnetic steel combination with ear design easy to remove and easy to remove by gently bending the steel plate.
- DOUBLE SIDED PEI POWDER: The spring steel plate is flexible and has good flatness sprayed with double sided PEI powder with a frosted texture anti wear and not easily scratched.And the service life is twice that of a single side.
- MAGNETIC BASE: With a magnetic base with a soft texture and good magnetic and temperature resistance with adhesive backing can be directly attached to the hot bed platform and can withstand high temperature.
- STRONG ADHESION: This 3D printer built plate features strong surface adhesion force and does not require any glue for adhesion enables cold printing creating perfect products with no warping.
- See more on Amazon...
Brand: Hyuduo | Manufacturer: Hyuduo
See On Amazon #7
FYSETC 3D Printer Kingrooon KP3S Print Bed - 180x180 Build Plate - Smooth PEY Textured PEI Spring Steel Sheet Replacement Only: Double Sides Heatbed Cover No Magletic Sticker for Filament PLA PETG ABS
Asin: B0BVG12P45
3. How To Get Good First Layer Adhesion? Pay Attention To The Nozzle-To-Surface Distance To Prevent Permanent Scars. Adjusting An Appropriate Z Axis Is Important For The First Layer Bed Adhesion. If Too Low, A Filament Buildup Occurs Or Easily To Tear The Printing Surface; Too High, The Prints Come Off The Build Plate, Don't Stick Well. Recommend To Turn Off The Cooling Fan And Slow Down The Speed To 10-25Mm/S When Going On A 3D Printing Project's First Layer. A Roll Of Dry Filament Also Works..
5. High Quality Spring Steel Sheet: Our 0.4Mm Thick Stainless Steel Plate Is Resistant To Deformation And Rust. Total Thickness Is About 0.7Mm. With High Flatness And Ample Toughness, It Provides Strong Adhesion, Making It Extremely User-Friendly, Especially For Newer. Regular Cleaning With Alcoholl Or A Cleaning Agent Is Recommended To Maintain Surface Cleanliness. Dirt And Oil Stains Can Reduce Print Adhesion And Affect The Clarity Of The Rainbow Starry Pattern On The Pey Surface..
4. Kindly Note: Recommend To Print Abs High Temperature Materials(Which Need Over 80℃/176℉) On The Textured Side, Better To Work With A 3D Printer Dust Cover. Do Not On The Smooth Side To Avoid Tearing The Pei Off..
2. 3D Printer Kp3s Build Plate Top Plate Only: Size:180X180mm,Suit For Kingrooon Kp3s, Kp3,Crux1 3D Printer Platform. If You Can Accept The 1-5Mm Inaccuracies, 185 X 185 184X184 Build Plate Also Can Fit For Them. A Good Hotbed Cover Replacement For That Pey Colorful Buildplate Kit(Asin:B0cjy4jbsg) At Our Store..
Features
- 1. An upgraded Replacement printing platform: JanusBPS 180x180mm/7.08inch. This steel plate is Dual-Side Coated, one side with Colorful PEY plate, another side is Textured PEI, Not come with a sticker base. The PEY supports temp up to 180 C, making it ideal for low-temp filaments like PLA. Our PEI provides a delicate matte texture, exuding a calm and stable quality, with high-temp resistance up to 300 C.
- 2. 3D Printer KP3S Build Plate Top Plate Only: Size:180x180mm,suit for Kingrooon KP3S, KP3,CRUX1 3D Printer platform. If you can accept the 1-5mm inaccuracies, 185 x 185 184x184 build plate also can fit for them. A good hotbed cover replacement for that PEY colorful buildplate kit(Asin:B0CJY4JBSG) at our store.
- 3. How to Get Good First Layer Adhesion? Pay Attention to the nozzle-to-surface distance to prevent permanent scars. Adjusting an Appropriate Z axis is IMPORTANT for the first layer bed adhesion. If too low, a filament buildup occurs or easily to tear the printing surface; too high, the prints come off the build plate, don't stick well. Recommend to turn off the cooling fan and slow down the speed to 10-25mm/s when going on a 3d printing project's first layer. A roll of dry filament also works.
- 4. Kindly Note: Recommend to print ABS high temperature materials(which need OVER 80 /176 ) on the Textured side, better to work with a 3d printer dust cover. Do NOT on the smooth side to avoid tearing the pei off.
- 5. High Quality spring steel sheet: Our 0.4mm thick stainless steel plate is resistant to deformation and rust. Total thickness is about 0.7mm. With high flatness and ample toughness, it provides strong adhesion, making it extremely user-friendly, especially for Newer. Regular cleaning with alcoholl or a cleaning agent is recommended to maintain surface cleanliness. Dirt and oil stains can reduce print adhesion and affect the clarity of the rainbow starry pattern on the PEY surface.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #8
PEI Sheet 150x150x03mm Spring Steel Sheet Heat Bed Platform for 3D Printer Printing Build Plate
Asin: B07L4HMHF9 | Ean: 5312413779431
Brand: Phoncoo | Manufacturer: Phoncoo
See On Amazon #9
HICTOP PEI 350x350 Double Side Textured Pei Magnetic PEI Sheet with Adhesive for Vorn 2.4 RepRap and Other Same Size 3D Printers
Asin: B0BHT19RWX | Model: PEI | PartNumber: PEI
3 Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well, But The Temperature Of The Hotbed Needs To Be About 80-85℃.
5 The Size Of Hictop Pei Bed Is 350*350Mm（13.8*13.8Inch）, It Is Applicable With Creality 3D Printer Such As Vorn 2.4 Reprap And Other Same Size 3D Printers.
4 Prints Come Off 350*350 Pei Sheet Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Gentle Flexing Of The Plate Will Help Remove It..
2 The Pei Sheet 350X350mm Is Very Easy To Use, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top. The Maximum Temperature For Printing Is 130℃ On The Bed..
Features
- 1 The HICTOP PEI 350x350 double sided pei is combined with 2 parts, a flexible steel platform coated with textured PEI surface on both sides and a magnetic bottom sheet with adhesive on the back.
- 2 The pei sheet 350x350mm is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130 on the bed.
- 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85
- 4 Prints come off 350*350 pei sheet easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
- 5 The size of HICTOP PEI bed is 350*350mm 13.8*13.8inch , it is applicable with Creality 3D printer such as Vorn 2.4 RepRap and other same size 3D Printers
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
Dimensions: 0.98 x 15.75 x 14.96 Inches
See On Amazon #10
IdeaFormer-3D Double Sided Textured PEI Spring Steel Plate 235x235mm, No Magnetic Build Plate Flexible PEI Sheet for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Neo/Ender 3 V2 Neo/Ender 5/Ender 5 Pro
Asin: B0BYD683TW | Model: DBS-235 | PartNumber: DBS-235
【High Durability】The Flexible Pei Spring Steel Plate Can Be Resistant To 200°C And Has High Strength With No Deformation..
【Easy Installation】Put Pei Build Plate On The Hot Bed Of Your 3D Printer, And It Is Ready To Use. (This Spring Steel Sheet Does Not Include Magnetic Plate.).
【Compatible 3D Printers 】Our Double-Sided Textured Pei Spring Steel Sheet Fits The Size Of 235 X 235Mm, Such As For Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Neo, Cr20, Cr20 Pro, Ender 5, Ender 5 Pro, Mega Pro, Mega Zero, Kobra, Aquila, Aquila C2, Aquila S2, Aquila X2, Neptune 2, Neptune 2S, Neptune X, Odin-5 F3 Etc..
【Compatible Filaments】Pei Build Plate Fits Most Filaments Such As Pla / Abs / Petg / Tpu / Nylon Etc..
Features
- Textured PEI Sheet - No Magnetic Build Plate Double sided textured PEI build plate coating adopts high temperature spraying process, the coating of the print plate is not easy to fall off and scratch. It bends thousands of times without being out of shape. There is no magnetic plate.
- Compatible Filaments PEI build plate fits most filaments such as PLA / ABS / PETG / TPU / nylon etc.
- High Durability The flexible PEI spring steel plate can be resistant to 200 C and has high strength with no deformation.
- Compatible 3D Printers Our double-sided textured PEI spring steel sheet fits the size of 235 x 235mm, such as for Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Neo, CR20, CR20 Pro, Ender 5, Ender 5 Pro, Mega Pro, mega zero, Kobra, Aquila, Aquila C2, Aquila S2, Aquila X2, Neptune 2, Neptune 2S, Neptune X, Odin-5 F3 etc.
- Easy Installation Put PEI build plate on the hot bed of your 3D printer, and it is ready to use. (This spring steel sheet does not include magnetic plate.)
- See more on Amazon...
Brand: IdeaFormer-3D | Manufacturer: Bell Tech
See On Amazon #11
FYSETC 3D Printer Platform - 355x355mm/13.9inch Colorful PEY - Textured PEI Build Plate: Voron2.4 R2 350 Hot Bed Flexible Removable Spring Steel Plate with Magletic Sticker for Filament PLA PETG ABS
Asin: B08YYBHCMK
【Double Sided Textured Pey+Pei Plate】This Spring Steel Sheet Comes With 2 Printing Textures. One Side Is Smooth Rainbow Star Pey Pattern Which Can Print Beautiful Starry Texture, Especially Shown At The Big Prints Bottom; Another Side Is Textured Pei Spring Steel Plate, Offering A Distinctive Frosted Touch..
【Easy To Remove The Model】It's Easy To Remove The Prints When The Pey-Pei Dual Side Sheet Cools Down To Around 40°C. If It's Stuck, Please Gently Bend The Build Plate To Pop It Off. We Also Have 235X235mm Build Plate For Ender 3 V2 - Ender 5, Or 254X241mm Build Plate For Prusa I3 Mk4, Or 257X257mm Build Plate For Bambulab X1c P1p 3D Printer At Our Store..
【Easy To Install 】Come With A Strong Magletic Base With Adhesive, So You Can Heat Your Bed To High Temps For Specialty Filaments And Not Worry About Loss Of Performance. Peel Off The Backing Paper And Stick It To The Bed, Finally Place The Pei Steel Plate On The Magentic Sheet. Before Printing, Please Remove The Protect Film Which Stick On The Pey Surface, Attach To Your Print Bed Via The Magletic Mounting Base..
【Not For Ender 5 Plus】Size: 355*355Mm/13.9*13.9 Inch, Apply To The Same Size Voro 2.4 Printer, A Bit Small For Sovl Sv03(Please Measure Your Build Plate,Not Reply On Bulid Volume Before Ordering). If Can Accept The Torelance 5-10Mm Comparied With Your Printing Area, Just Buy It. For Ender 5 Plus, It Needs 377X370mm Build Plate..
Features
- Fantastic Big Size Starry PEY & Textured PEI A must-have spring steel plate for your Voron2.4 350mm Build for finishing large 3d printing project. Size:355x355mm/13.9x13.9inch. When you get excellent starry pattern by PEY build plate, the star textured may be disappear if wiped with hands or other oily objects. Don't worry, wipe it with a wet tissue or alcohol and the rainbow starry will apprear again.
- Not for Ender 5 Plus Size: 355*355mm/13.9*13.9 inch, apply to the same size Voro 2.4 printer, a bit small for Sovl SV03(Please measure your build plate,not reply on bulid volume before ordering). If can accept the torelance 5-10mm comparied with your printing area, just buy it. For Ender 5 Plus, it needs 377x370mm build plate.
- Double Sided Textured PEY+PEI Plate This spring steel sheet comes with 2 printing textures. One side is smooth rainbow star PEY pattern which can print beautiful starry texture, especially shown at the big prints bottom; another side is textured PEI spring steel plate, offering a distinctive frosted touch.
- Easy to Install Come with a Strong Magletic Base with adhesive, so you can heat your bed to high temps for specialty filaments and not worry about loss of performance. Peel off the backing paper and stick it to the bed, finally place the PEI steel plate on the magentic sheet. Before printing, please remove the protect film which stick on the PEY surface, attach to your print bed via the Magletic Mounting Base.
- Easy to remove the model It's easy to remove the prints when the PEY-PEI dual side sheet cools down to around 40 C. If it's stuck, please gently bend the build plate to pop it off. We also have 235x235mm build plate for ender 3 v2 - ender 5, or 254x241mm build plate for prusa i3 MK4, or 257x257mm build plate for bambulab X1C P1P 3d printer at our store.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #12
3D Printer 120x120mm PEI Spring Steel Build Plate, Double Sided Textured Flex PEI Sheet with Magnetic Bottom with Adhesive (4.7x4.7 inch) for Voron 0.1 V0 3D Printer.
Asin: B09TXM7VFC | Model: 20220305 | PartNumber: 20220305
【Good Quality】: Flexible, Removable, High Strength And Heat Resistance, Three-Layer Design, Thicker And More Durable. Easily Handle Temperatures Up To 130°C. And Perfect For Pla, Peek, Abs.Note:The Adaptation Temperature Of Different Materials Is Different, Please Adjust It Reasonably..
【Quality Promise】: All Products Have Undergone Quality Inspection Before Delivery. If You Have Any Questions About Product Quality And Suggestions, Please Feel Free To Contact Us And We Will Reply Within 24 Hours..
【Practical Features】:Size:120X120mm/4.7X4.7 Inch Is Suitable For Voron 0.1 V0 And The Same Size Other 3D Printers.If You Are Not Sure, You Can Contact Us To Communicate And Confirm..
【Proven Solution】:No Glue, No Tap, When Hotbed Temperature Reaches 60℃ ,Materials Such As Pla Abs Will Stick Well, And After Printing, When Spring Steel Ender 5 Plus Pei Build Plate Cools To Room Temperature, It's Easy To Remove The Printed Matter From The Platform By Bending Slightly. Through Hundreds Of Experimental Tests, Repeated Use Is Still As New..
Features
- Special Design : Compared with smooth PEI, the design of flexible steel bed with Double Sided Textured PEI surface is excellent. The matte texture makes it easier for the printing material to adhere to the surface of PEI. Note: Please measure the size of your printing platform before purchasing. We are very grateful for your love and care for the product.
- Proven Solution :No glue, No tap, when hotbed temperature reaches 60 ,materials such as PLA ABS will stick well, and after printing, when spring steel ender 5 plus PEI build plate cools to room temperature, it's easy to remove the printed matter from the platform by bending slightly. Through hundreds of experimental tests, repeated use is still as new.
- Good Quality : Flexible, removable, high strength and heat resistance, Three-Layer design, thicker and more durable. Easily handle temperatures up to 130 C. And perfect for PLA, PEEK, ABS.Note:The adaptation temperature of different materials is different, please adjust it reasonably.
- Practical Features :Size:120x120mm/4.7x4.7 inch is suitable for Voron 0.1 V0 and the same size other 3D printers.If you are not sure, you can contact us to communicate and confirm.
- Quality Promise : All products have UNDERGONE QUALITY INSPECTION before delivery. If you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours.
- See more on Amazon...
Brand: G-Hubble | Manufacturer: G-Hubble
Dimensions: 0.07 x 4.70 x 4.70 inches
See On Amazon #13
FYSETC Voron0.2 Pro PEI Spring Steel Plate Double-Sided -Textured PEI+PET-CarbonFiber Platform with Sticker Removable Hotbed Cover 120mm/4.7inch for VoronV0 V0.1 3D Printer Part
Asin: B0BN372T68
【Wide Compatibility】No Glue, No Tap, Compatible With Various Kinds Of Filaments, Such As Pla, Petg, Abs, Tpu, Tpe, Hips, Pa-Cf, Wood Etc. The Adaptation Temperature Of Different Materials Is Different, Please Adjust It Reasonably. Reference Bed Temperature: Pla(50-65℃), Petg(70-80), Tpu(60-70), Abs(90-100, Recommend On The Gold Side). Note: Please Keep Nozzle Not Directly Touch To Avoid Scratch Or Permization..
【Good Quality】Made Of High Quality Stainless Steel, Flexible, Removable, High Strength And Heat Resistance, Three-Layer Design, Thicker And More Durable. Textured Pei Powder Side Can Easily Handle Temperatures Up To 190°C And Carbonfiber Side Can Work With Temperature Up To 100℃. It's Easy To Remove The Printed Matter From The Platform By Bending Slightly. Through Hundreds Of Experimental Tests, Repeated Use Is Still As New..
【Applicable Model】Size: 120X120mm/4.7X4.7 Inch, Compatible With Vorn 0/ Vorn V0.1 3D Printer. Maybe Fit For Tina2,Tina2s..
【Specail Design】Double-Sided Build Plate Is One Side Textured Pei Powder(Gold) + Another Coated Pet-Carbonfiber Sheet, Gives You Two Different Experiences On One Plate Just By Flipping It Over. The Matte Texture Makes It Easier For The Printing Material To Adhere To The Surface, Especailly For Abs. So Does The New Side. It Leaves A Smooth Finish Inside With The Beautiful-Texture Finish. The Pet-Cf Surface Has Grids To Help Observe Nozzle Positioning Easily..
Features
- Upgrade Experience Excellent double-sided PEI Powder + PET-CF Coating spring steel build plate design. This 120x120mm/4.7inch Plate kit includes 2 part, a flexible spring steel plate and a soft bottom sheet with strong back adhesive.
- Specail Design Double-sided Build Plate is One side textured pei powder(Gold) + another coated PET-Carbonfiber sheet, gives you two Different experiences on one plate just by flipping it over. The matte texture makes it easier for the printing material to adhere to the surface, especailly for ABS. So does the new side. It leaves a smooth finish inside with the beautiful-texture finish. The PET-CF surface has grids to help observe nozzle positioning easily.
- Wide Compatibility No glue, No tap, Compatible with various kinds of filaments, such as PLA, PETG, ABS, TPU, TPE, HIPS, PA-CF, WOOD etc. The adaptation temperature of different materials is different, please adjust it reasonably. Reference bed temperature: PLA(50-65 ), PETG(70-80), TPU(60-70), ABS(90-100, recommend on the Gold side). Note: Please keep nozzle not directly touch to avoid scratch or permization.
- Applicable Model Size: 120x120mm/4.7x4.7 inch, compatible with Vorn 0/ Vorn V0.1 3d printer. maybe fit for TINA2,Tina2s.
- Good Quality Made of high quality stainless steel, Flexible, removable, high strength and heat resistance, Three-Layer design, thicker and more durable. Textured PEI Powder side can easily handle temperatures up to 190 C and Carbonfiber side can work with temperature up to 100 . It's easy to remove the printed matter from the platform by bending slightly. Through hundreds of experimental tests, repeated use is still as new.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #14
3D Printer Spring Steel Build Plate Double Sided PEI Magnetic Sticker Printing Bed Plate for Voron, 255x255mm
Asin: B0C97D1QDL | Model: FTVOGUE2uw30yz9p5 | PartNumber: FTVOGUE2uw30yz9p5
Strong Compatibility: Pei Build Plate Size Is 255X255mm, Suitable For Voron And Other Models. The Printing Size Of The Spring Steel Platform Of The 3D Printer Can Be Perfectly Compatible With The Machine..
How To Operate: When The Temperature Of The Heating Bed Reaches Room Temperature, The Printed Piece Easily Falls Off The Pei Plate. If The Print Gets Stuck, Gently Bending The Plate Will Help Remove The Print..
Industrial Supplies, Industrial Control, Additive Manufacturing Products, 3D Printers Accessories.
Double Sided: When The Temperature Of The Heated Bed Is Around 60°C, Excellent Adhesion Is Achieved And You Can Print Directly On Each Side Of The Double Sided Pei Platform Without Using Additional Tools..
Cold Printing And Frost Effect: Strong Surface Adhesion, No Glue, This Pei Build Plate Can Achieve Cold Printing, And Printing Without Warping Edge, Printed Products With Frosting Effect On The Bottom, Beautiful..
Features
- Thickness: This platform's PEI coating thickness 0.25mm, and spring plate thickness 0.4mm, magnetic rubber plate thickness 1.2mm. The overall thickness is about 2mm.
- Cold Printing and Frost Effect: Strong surface adhesion, no glue, this PEI build plate can achieve cold printing, and printing without warping edge, printed products with frosting effect on the bottom, beautiful.
- Strong Compatibility: PEI build plate size is 255x255mm, suitable for Voron and other models. The printing size of the spring steel platform of the 3D printer can be perfectly compatible with the machine.
- Double Sided: When the temperature of the heated bed is around 60 C, excellent adhesion is achieved and you can print directly on each side of the double sided PEI platform without using additional tools.
- How to Operate: When the temperature of the heating bed reaches room temperature, the printed piece easily falls off the PEI plate. If the print gets stuck, gently bending the plate will help remove the print.
- Industrial supplies, industrial control, additive manufacturing products, 3D printers accessories
- See more on Amazon...
Brand: FTVOGUE | Manufacturer: FTVOGUE
See On Amazon #15
FYSETC Ender 2 Pro Dual Size PEI Sheet Kit 165x165mm/6.5x6.5inch: Textured - Smooth PEI Surface+Sticker Bottom Removable Spring Steel Heated Bed Cover for Adventure 3/ LuzBot Mini 2 Desktop 3D Printer
Asin: B0BVHL3ND1
Easy To Use: Simply Stick The Sticker Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform On The Top. Both Sides Can Be Used To Print, Convenient. The Smooth Pei Sheet Is Pre-Sticked By Machine, No Worry About The Bubbles, Please Peel Off The Profective Film On The Pei Surface Before Using. Recommend Printing Abs On The Textured Side..
Good Quality: Flexible, Removable, High Strength And Heat Resistance, Three-Layer Design, Thicker And More Durable. Easily Handle Temperatures Up To 130°C. And Perfect For Pla, Peek, Abs. Note: The Adaptation Temperature Of Different Materials Is Different, Please Adjust It Reasonably..
Proven Solution: No Glue, No Tap, When Hotbed Temperature Reaches 60℃ ,Materials Such As Pla Abs Will Stick Well, And After Printing, Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature..
Practical Features: Size:165 X 165Mm/6.5X6.5 Inch Is Compatible With Flashfoge Adventure 3(Monprice Voxel)/Ender 2 Pro/Luzbot Mini 2 Desktop 3D Printer Or The Same Size Other 3D Printers.Please Note: Don't Refer To Your Build Volume Which Is 5-10Mm Smaller Than That Of The Real Hotbed. It Would Be Better To Remeasure Your Hotbed Before Ordering!.
Features
- Special Design: An upgraded Replacement printing platform for glass plate --JanusBPS 165x165mm/6.5x6.5inch. This steel plate is Double-Side Coated, one side with Golden Powder, another with a Smooth PEI pre-sticked, comes with a sticker base. You can get 2 different experience on one steel plate just by flipping it over.
- Practical Features: Size:165 x 165mm/6.5x6.5 inch is compatible with FlashFoge Adventure 3(Monprice Voxel)/Ender 2 pro/LuzBot Mini 2 Desktop 3D Printer or the same size other 3D printers.Please note: DON'T refer to your build volume which is 5-10mm smaller than that of the real hotbed. It would be better to remeasure your hotbed before ordering!
- Easy to use: Simply stick the sticker bottom sheet onto your heated bed, then place the steel platform on the top. Both sides can be used to print, convenient. The smooth pei sheet is pre-sticked by machine, no worry about the bubbles, please peel off the profective film on the pei surface before using. Recommend printing ABS on the textured side.
- Proven Solution: No glue, No tap, when hotbed temperature reaches 60 ,materials such as PLA ABS will stick well, and after printing, prints come off the surface easily when the temperature of the heated bed reaches room temperature.
- Good Quality: Flexible, removable, high strength and heat resistance, Three-Layer design, thicker and more durable. Easily handle temperatures up to 130 C. And perfect for PLA, PEEK, ABS. Note: The adaptation temperature of different materials is different, please adjust it reasonably.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
Dimensions: 0.02 x 6.50 x 6.50 inches
See On Amazon #16
FYSETC 3D Printing Buildplate 300x300mm/11.8x11.8 inch Steel Spring Sheet Bed Printing Hotbed Parts Steel Plate with PEI + Sticker Surface for TAZ 6 Ender 6
Asin: B08C77H5JZ
Our Sticker And Films Have All Been Formulated To Resist Over 130℃ / 226F So You Can Heat Your Bed To High Temps For Specialty Filaments And Not Worry About Loss Of Performance.
Before Printing, Please Remove The Protect Film Which Stick On The Pei Surface, So If You Received Package But Found The Air Bubbles Or Scratches, Please Don't Worry, They Are The Surface Layer, Pei Will Not Be Affected..
The Pei Has Been Pasted, If Pei Is Damaged During Use, You Can Tear It Off From The Steel Plate And Purchase The Pei Separately To Replace It. After Printing Or Before Printing, Use Steel Wool Pads With Detergent To Clean The Pei Sheet, Will Keep The Pei Like New, Give The Pei More Life. But Be Make Sure The Hotbed Is Cold..
Size:300 X 300Mm/11.8X11.8 Inch, Please Re-Measure Your Build Plate, Don't Refer To Build Volume.Fits: Taz Workhorse, Taz Pro, Taz 6, Taz 5, Taz 4, Taz 3, May Fit: A8 Plus, Et5 And Et5 Pro, Ender 6（290X290mm）.
Features
- This PEI Flexible Heated Bed is combined with 2 parts: a flexible steel platform sticking with a pei sheet on one side + a sticker bottom sheet with adhesive on the back. The PEI comes pre applied. If want to leave a frosted bottom on your print, please search our double-sided textured pei powder(Asin: B07V9DY7SM / B088TBZSV6 ) at the shop.
- Size:300 x 300mm/11.8x11.8 inch, please re-measure your build plate, don't refer to build volume.Fits: TAZ Workhorse, TAZ Pro, TAZ 6, TAZ 5, TAZ 4, TAZ 3, may fit: A8 plus, et5 and et5 pro, Ender 6 290x290mm
- Our sticker and films have all been formulated to resist over 130 / 226F so you can heat your bed to high temps for specialty filaments and not worry about loss of performance
- The PEI has been pasted, If PEI is damaged during use, you can tear it off from the steel plate and purchase the PEI separately to replace it. After printing or before printing, use steel wool pads with detergent to clean the PEI sheet, will keep the PEI like new, give the PEI more life. but be make sure the hotbed is cold.
- Before printing, Please remove the protect film which stick on the PEI surface, so if you received package but found the air bubbles or Scratches, please don't worry, they are the surface layer, PEI will not be affected.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
See On Amazon #17
FYSETC Ender 5 Plus Build Plate Spring Steel 377x370mm/14.84x14.56in Double-Sided Textured PEI Surface and Sticker Bottom with Adhesive Removable PEI Sheet Flex Steel Platform-Gold
Asin: B09P8KD4B2
Made Of High Quality Steel Plate, Flexible, Removable, High Strength And Heat Resistance. Strong Sticker Base With Adhesive, So You Can Heat Your Bed To High Temps For Specialty Filaments And Not Worry About Loss Of Performance..
Easy To Install. Remove The Back Adhesive At Sticker Base And Stick It On Your Hot Bed, Then Align The Steel Plate To The Base. Easily Handle Temperatures Up To 130°C. Works Great With Pla, Tpu, Petg, Abs, As Well As Many Other Filaments. If You Need More Adhesion For Tough-To-Stick Filaments Like Nylon, Feel Free To Use Glue Sticks, They Will Wash Off With Water After Use. If Can't Get A Perfect First Layer, Please Have A Try To Low Down The Printing Speed..
No More Prying Prints With A Scraper. Just Remove The Spring Steel Plate When Finished Printing, Flex The Part Off, And Snap The Plate Back Onto The Included Sticker! Never Scratch, Gouge, Or Damage Your Print Or Build Plate Ever Again!.
Size:377X370mm/14.84X14.56In, Compatible With Ender 5 Plus Or Other Similarly Build Plate. Please Re-Measure Your Hot Bed Before Ordering, Not Rely On The Build Volume/Printing Size!.
Features
- Special designed for Ender 5 Plus, Excellent double-sided PEI powder textured spring steel build plate, leaves a textured matte finish on your parts. Both sides can be used, which is more cost-effective. The kit includes one flexible steel plate and a soft sticker base.
- Size:377x370mm/14.84x14.56in, compatible with Ender 5 plus or other similarly build plate. Please re-measure your hot bed before ordering, not rely on the build volume/printing size!
- Made of high quality steel plate, Flexible, removable, high strength and heat resistance. Strong sticker Base with adhesive, so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.
- No more prying prints with a scraper. Just remove the spring steel plate when finished printing, flex the part off, and snap the plate back onto the included Sticker! Never scratch, gouge, or damage your print or build plate ever again!
- Easy to install. Remove the back adhesive at sticker base and stick it on your hot bed, then align the steel plate to the base. Easily handle temperatures up to 130 C. Works great with PLA, TPU, PETG, ABS, as well as many other filaments. If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use glue sticks, they will wash off with water after use. If can't get a perfect first layer, please have a try to low down the printing speed.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #18
FYSETC 3D Printer QID X-Pro Spring Steel Bed 230 x150mm/9.0x5.9in Double Sides Textured PEI Powder Removable Build Plate with Sticker Base Printing Hotbed Cover for Replicatr QI X-Pro Creator Pro
Asin: B09MLNJR8D
Made Of High Quality Stainless Steel And Strong Sticker Base. Very Easy To Use, Simply Stick The Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform On The Top. Flexible And Removable. The Maximum Temperature For Printing Is About 130℃ On The Bed. Just Adjust The Bed Temp According To The Printing Filament..
Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Gentle Flexing Of The Plate Will Help Remove It..
It Behaves As Most Pei Sheets Would And Works Great With Filaments Pla, Tpu, Petg, Abs Etc. Reference Temperature:Pla 50-60℃(Hoted Bed), 200-210℃(Nozzle); Abs 70-120℃(Hoted Bed), 240-250℃(Nozzle);Petg 60-85℃(Hoted Bed), 230-245℃(Nozzle); Carbonfiber 50-60℃(Hoted Bed), 200-220℃(Nozzle); Tpu 50-60℃(Hoted Bed), 200-220℃(Nozzle). If You Need More Adhesion For Tough-To-Stick Filaments Like Nylon, Feel Free To Use Glue Sticks, They Will Wash Off With Water After Use..
Size: 230 X150mm/9.0X5.9 In, Compatible With Qid X-Pro Flashfoge Creator Makebot Replicato 3D Printer Or Other Similarly Sized Build Plate. Please Re-Measure Your Heated Bed Before Ordering, Not Rely On The Build Volume Or Printing Size..
Features
- This textured PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a bottom sheet with adhesive on the back. The PEI comes pre applied. Both sides can be used freely. A Supplement for sticking PEI kit(Asin: B088ZGTPGB) or Janusbps Kit (Asin:B0B3XC9NGP) at our store.
- Size: 230 x150mm/9.0x5.9 in, compatible with QiD X-pro Flashfoge Creator Makebot Replicato 3D Printer or other similarly sized build plate. Please re-measure your heated bed before ordering, not rely on the build volume or printing size.
- Made of high quality stainless steel and strong sticker base. Very easy to use, simply stick the bottom sheet onto your heated bed, then place the steel platform on the top. Flexible and Removable. The maximum temperature for printing is about 130 on the bed. Just adjust the bed temp according to the printing filament.
- It behaves as most PEI sheets would and works great with filaments PLA, TPU, PETG, ABS etc. Reference Temperature:PLA 50-60 (hoted bed), 200-210 (nozzle); ABS 70-120 (hoted bed), 240-250 (nozzle);PETG 60-85 (hoted bed), 230-245 (nozzle); Carbonfiber 50-60 (hoted bed), 200-220 (nozzle); TPU 50-60 (hoted bed), 200-220 (nozzle). If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use glue sticks, they will wash off with water after use.
- Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #19
Befenybay Flexible Removable PEI Metal Sheet Bed Magnetic Heated Bed Build Surface 150x150mm for 3D Printer (150x150mm)
Asin: B08NSK5W7F | Model: BE085 | PartNumber: BE085 | Ean: 0191170847073 | UPC: 191170847073
【Easy To Adhere And Remove】Easy To Adhere To The Printing Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Offrepeatedly,Resistance.
【Reuse For Multiple Prints】Just Wipe Down With Isopropyl Alcohol Between Prints For Best Results.
【Aplication】Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry.
【Flexible And Removable】Flexible, Removable, Can Stick To Magnetics Very Well. High Strength And Heat Resistance.
Features
- Size 150mm x 150mm,the overall thickness 2MM/0.08 inch
- Flexible and Removable Flexible, removable, can stick to magnetics very well. High strength and heat resistance
- Easy to Adhere and Remove Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right offrepeatedly,resistance
- Aplication ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
- Reuse for multiple prints Just wipe down with isopropyl alcohol between prints for best results
- See more on Amazon...
Brand: Befenybay | Manufacturer: Befenybay
See On Amazon
Looking For Something Else?
Search