3 Phase Voltage Protection Relay Phase Sequence Phase Failure Protection Relay 8A 10A 1SPDT 2SPDT 1Pcs (Color : GRV8-06, Size : M460 3Phase3Wire)
Asin: B0CZHJ3M54 | Model: ACLDOYYV | PartNumber: ACLDOYYV | Ean: 9408659535019
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: ACLDOYYV | Manufacturer: ACLDOYYV
Weight: 0.11 pounds
See On Amazon Similar To 3 Phase Voltage Protection Relay
#1
UCTRONICS DC 12V Time Delay Relay Module for Smart Home, Tachograph, GPS, PLC Control, Industrial Control, Electronic Experiment, Arduino Robot
Asin: B07BT25J52 | Model: U6031 | PartNumber: U6031
Self Protection: Built With Protection Against Reversal Diode, Supports Anti-Reverse Protection. Note: Please Remove The Jumper Cap Of S5 When Controlling Ac Current Or Dc Current Voltages Other Than 12V, Otherwise The Module Will Be Burned Or Will Not Work Properly..
Applications: This Module Works As A Switch With Time Delay On And Off Function, Highly Recommended For Automotive Circuit Modification, And Led Lights, Dc Motors, Pump And Smart Home Control System..
Functions: Supports On Delay And Off Delay Modes, The Delay Time Can Be Adjusted From 0.1S To 1H, The Delay Mode And Delay Time Can Be Set By Shorting Or Opening The Jumper Pins And Rotating The Potentiometer..
Features
- Operating Voltage: DC 12V; Quiescent Current: 5.5mA; Max. Operating Current: 42mA; Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V; Max. Load Current: 10A
- Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer.
- Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly.
- Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.04 pounds
See On Amazon #2
KeeYees 5pcs 1 Channel 5V Relay Module Board Shield KY-019 LED Indicator for Arduino + 3pcs 20CM 10Pin Female Male Jumper Wires
Asin: B07L6J6FHH | Model: KYES504-KY019-5 | PartNumber: KYES504-KY019-5 | Ean: 0705883356380 | UPC: 705883356380
No Need To Buy The Jumper Wires Extra, This Set Contains 20Cm 10Pin Female To Female, Female To Male, Male To Male Dupont Jumper Wires, With Which You Can Easier To Complete The Project..
This Relay Can Be Used Not Only As A Microcontroller Development Board Module, But Also As A Home Appliance Controller..
Features
- The relay can directly control a variety of equipment and loads, which meets international safety standards, and also has power and relay indicators.
- This relay can be used not only as a microcontroller development board module, but also as a home appliance controller.
- No need to buy the Jumper Wires extra, this set contains 20cm 10Pin female to female, female to male, male to male Dupont Jumper Wires, with which you can easier to complete the project.
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
See On Amazon #3
irhapsody 5 Pack 40/30 AMP 12V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN SPDT Automotive Relay
Asin: B074FSZWVT | Model: 13 | PartNumber: 13
Be Careful When Inserting The Relay Into The Socket. If You Force It, You Will Bend The Female Connectors.
Nominal Coil Voltage: 12 V Dc; Coil Power: 1.8 W; Coil Resistance: 80 Ω; Must Operate Voltage: 6~8 V Dc; Must Release Voltage: 0.6~3.6 V Dc; Maximum Applied Voltage: 15.6 V Dc.
Primary Leads Use 12 A.W.G Tinned Copper Wire. Coil Leads Use 16 A.W.G.
12-Volt 5-Prong Relay. Excellent Water-Repellent And Dustproof Ability, But Not Using It In Water.
Features
- Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for
- 12-volt 5-prong relay. Excellent water-repellent and dustproof ability, but not using it in water
- Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors
- Primary leads use 12 a.w.g tinned copper wire. Coil leads use 16 a.w.g
- Nominal Coil Voltage: 12 V DC; Coil Power: 1.8 W; Coil Resistance: 80 ; Must Operate Voltage: 6~8 V DC; Must Release Voltage: 0.6~3.6 V DC; Maximum Applied Voltage: 15.6 V DC
- See more on Amazon...
Brand: iRhapsody | Manufacturer: IRHAPSODY
Dimensions: 1.70 x 7.85 x 1.60 Inches | Weight: 1.25 pounds
Warranty: ONE YEAR WARRANTY
See On Amazon #4
HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger
Asin: B00LW15A4W | Model: 3-01-0340 | PartNumber: 3-01-0340 | Ean: 0702082655948 | UPC: 702082655948
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move..
The Module Can Be Set By Jumper High Or Low Trigger..
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient..
Using Smd Optocoupler Isolation, Strong Driving Capability, Stable Performance; Trigger Current 5Ma..
Features
- The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
- Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- Fault-tolerant design, even if the control line is broken, the relay will not move.
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
- The Module can be set by jumper high or low trigger.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #5
Iot Relay - Enclosed High-Power Power Relay for Arduino, Raspberry Pi, PIC or WiFi, Relay Shield
Asin: B00WV7GMA2 | Model: IoT | PartNumber: IoT | Ean: 5269692770683, 0705020645490 | UPC: 705020645490
Wires To Your Arduino, Raspberry Pi, Pic, Or Other Micro.
Includes Surge Supression, Debounce, Safety Breaker.
Takes The Place Of A Relay Board. Fully Assembled And Ready To Use..
One Circuit, 4 Outlets, 2X Nc, 2X No.
Features
- Safe, Reliable Power Control
- One circuit, 4 outlets, 2x NC, 2x NO
- Wires to your Arduino, Raspberry Pi, PIC, or other micro
- Takes the place of a relay board. Fully assembled and ready to use.
- Includes surge supression, debounce, safety breaker
- See more on Amazon...
Brand: DLI 705020645490 | Manufacturer: Digital Loggers
See On Amazon #6
Nilight 50044R 5 Pack Waterproof 40/30 AMP Heavy Duty 12 AWG Tinned Copper Wires 5-PIN SPDT Bosch Style 12V Automotive Relay and Harness Set,2 Year Warranty
Asin: B07V9M7FMH | Model: 50044R | PartNumber: 50044R | Ean: 0812227032197 | UPC: 812227032197
Pre-Wired Harness: Heavy Duty 12/16 Awg Wiring Harness. Black - 16Awg Pin85, White - 16Awg Pin86, Red - 12Awg Pin30 Yellow - 12Awg Pin87a, And Blue - 12Awg Pin87.
Package Includes: 5 Pack Waterproof Relay And Harness. 1X User Manual. 2 Year Warranty By Nilight..
Enhanced Waterproof - The 5-Pin Relays Are Tightly Sealed With Strong Cap And Seal Ring, Excellent Performance Of Waterproof, Dust Proof And Moisture Proof, Works Well In Any Weather Conditions.
Premium Quality: Durable Relay And Harness Socket With 5 Wires; Made From High-Grade Materials To Ensure Superior Quality And Long Lifespan.
Features
- 12 V DC automotive waterproof relays (max 14 V). Note: 12 V and 14 V are coil voltages, they are not the voltage that triggers the switch
- Premium quality: durable relay and harness socket with 5 wires; made from high-grade materials to ensure superior quality and long lifespan
- Pre-wired Harness: Heavy duty 12/16 AWG wiring harness. Black - 16AWG Pin85, White - 16AWG Pin86, Red - 12AWG Pin30 Yellow - 12AWG Pin87a, and Blue - 12AWG Pin87
- Enhanced Waterproof - The 5-Pin relays are tightly sealed with strong cap and seal ring, excellent performance of waterproof, dust proof and moisture proof, works well in any weather conditions
- Package includes: 5 pack Waterproof Relay and Harness. 1x User manual. 2 Year Warranty by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 1.93 x 7.17 x 6.34 Inches
Warranty: 2 Years Warranty
See On Amazon #7
Tnisesm 2PCS Power Relay AC120V Coil, 30A SPDT(1NO 1NC) 120 VAC with Flange Mounting and 10 Quick Connect Terminals Wires Mini Relay NT90-AC120V-10X
Asin: B087G6D24G | Model: NT90-AC120V-10X | PartNumber: NT90-AC120V-10X
Easy To Use: Attached With Crimping Terminals Wires For Worry-Free Installation..
Package Content : 2 X Power Relay, 10 Terminal Wires.
Epoxy Sealed Versions Available.
Coil Voltage : Ac 120V; 30A Spdt 240Vac.
Features
- Product Type: Power Relay with Terminal Wires; SPDT(1NO 1NC)
- Coil Voltage : AC 120V; 30A SPDT 240VAC
- Easy to use: Attached with crimping terminals wires for worry-free installation.
- Epoxy sealed versions available
- Package Content : 2 x Power Relay, 10 Terminal Wires
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #8
Teyleten Robot DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control Board 3V/3.3V Relay Module for Arduino (Pack of 5)
Asin: B07XGZSYJV | Model: RK-S1B4-G97L | PartNumber: RK-S1B4-G97L | Ean: 0724545020568 | UPC: 724545020568
Optocoupler Isolator:3V/3.3V Power Relay Module Supports Photocoupler Isolation Control..
30Vdc 250Vac Load：The Power Switch Is Compatible With 10A 250Vac And 10A 30Vdc Load..
Features
- Original Songle Relay
- 30VDC 250VAC Load The power switch is compatible with 10A 250VAC and 10A 30VDC load.
- Optocoupler Isolator:3V/3.3V power relay module supports photocoupler isolation control.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.79 x 2.76 x 0.67 Inches | Weight: 0.00 pounds
Warranty: no
See On Amazon #9
irhapsody 1 Pack 40/30 AMP 12V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN SPDT Automotive Relay
Asin: B074QV54V1
Be Careful When Plugging The Relay Into The Socket. If You Push Hard, You Will Bend The Female Connector.
Spdt Relay: It Has Both Normally Open And Normally Closed Terminals, Terminal 87A Is Powered When The Relay Is Inactive And Switches The Power To Terminal 87 When The Relay Is Activated.
Primary Leads Use 12 A.W.G Tinned Copper Wire. Coil Leads Use 16 A.W.G.
12-Volt 5-Prong Relay. Excellent Water-Repellent And Dustproof Ability, But Not Using It In Water.
Features
- Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for
- 12-volt 5-prong relay. Excellent water-repellent and dustproof ability, but not using it in water
- Be careful when plugging the relay into the socket. If you push hard, you will bend the female connector
- Primary leads use 12 a.w.g tinned copper wire. Coil leads use 16 a.w.g
- SPDT relay: it has both normally open and normally closed terminals, terminal 87A is powered when the relay is inactive and switches the power to terminal 87 when the relay is activated
- See more on Amazon...
Brand: iRhapsody | Manufacturer: IRHAPSODY
Dimensions: 1.35 x 8.17 x 1.40 inches | Weight: 0.24 pounds
Warranty: 1 YEAR WARRANTY
See On Amazon #10
SunFounder Lab 4 Relay Module 5V 4 Channels Relay Module Compatible with Arduino R3 1280 Arm PIC AVR STM32
Asin: B00E0NSORY | Ean: 0520141421286 | UPC: 520141421286
Standard Interface That Can Be Controlled Directly By Microcontroller (Compatible With Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic)..
Applications: Supports All Mcu Control, The Industrial Field, Plc Control, Smart Home Control, Vcc System Power And So On..
Indication Led’S For Relay Output Status..
Equiped With High-Current Relay, Ac250v 10A ; Dc30v 10A..
Features
- 5V 4-Channel Relay interface board, and each one needs 15-20mA Driver Current.
- Equiped with high-current relay, AC250V 10A ; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- Indication LED s for Relay output status.
- Applications: Supports all MCU control, The industrial field, PLC control, Smart home control, VCC system Power and so on.
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.80 x 3.20 x 2.90 inches | Weight: 0.09 pounds
See On Amazon #11
ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32
Asin: B09ZQRLD95
With Power Indicator,8-Way Road Has A Status Indicator. With A Relay Coil To Absorb The Diode Protection..
The 8 Channels Are Optically Isolated, Safe, Reliable, Anti-Interference. Widely Used For All Mcu Control, Industrial Sector, Plc Control, Smart Home Control。For A Complete Data Sheet For This Relay Board, Please Download It From: Http://Dwz.Win/Uhw.
Standard Interface That Can Be Controlled Directly By Microcontroller (Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic).
Each Relay Has Normally Open And Normally Closed Contact. Can Be Selected By Jumper Relay And Ttl Or Ground..
Features
- 5V 8-Channel Relay interface board, each one needs 70mA Driver Current; Equiped with high-current relay, AC250V 10A ; DC30V 10A
- Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
- With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection.
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #12
mxuteuk 2pcs JQX-13FL AC 110V/120V Coil 8 Pin 10A DPDT LED Indicator Electromagnetic Power Relay, with Base, with DIN Rail Slotted Aluminum
Asin: B07QXWZP3R | Model: 13 | PartNumber: 13 | Ean: 0741416011425 | UPC: 741416011425
Coil Voltage:Ac 110V; Contact Capacity: 10A 250Vac/10A 28Vdc;.
Package Content : 2 X Power Relay + 2 X Socket + 1 X Rail Slotted Aluminum + 2 X Screw.
Overall Size(Approx. ): 79 X 28 X 64Mm/3.1" X 1.1" X 2. 5"(L*W*H).
Mount Rail Type : 35Mm Din Rail; Din Rail Length : 100Mm/4"(L).
Features
- Product Name:Electromagnetic Power Relay; Relay Model : JQX-13FL; Type : DPDT(2NO 2NC); Number of Terminals : 8 ; Socket Model : PTF08A-E
- Mount Rail Type : 35mm DIN Rail; DIN Rail length : 100mm/4(L)
- Coil Voltage:AC 110V; Contact Capacity: 10A 250VAC/10A 28VDC;
- Overall size(approx. ): 79 x 28 x 64mm/3.1 x 1.1 x 2. 5(L*w*h)
- Package Content : 2 x Power Relay + 2 x Socket + 1 x Rail Slotted Aluminum + 2 x Screw
- See more on Amazon...
Brand: mxuteuk | Manufacturer: mxuteuk
See On Amazon #13
Electromagnetic Power Relay, 8-Pin 10 AMP 110V/120V AC Relay Coil with Socket Base, LED Indicator, DPDT 2NO 2NC - MY2NJ [Applicable for DIN Rail System]
Asin: B0BNCZCFGY
Coil Voltage: 110V/120V Ac; Contact Capacity: 10A 240Vac.
Led Signal Lamp : It Can Judge The Ac Or Dc Coil, And Judge Whether The Coil Is Energized.
Red Mechanical Indicatoe:It Can Intuitively Judge Whether The Relay Is Attracted.
Product Name: Electromagnetic Power Relay; Model: Yj2n-Ly Type: Dpdt; Number Of Terminals: 8.
Features
- Electromagnetic relays are widely used: household air conditioner compressor motors, fan motors, cooling pump motors, starter relays for car starters, spur relays, motors, generator circuit breakers, industrial relays, etc
- Product Name: Electromagnetic Power Relay; Model: YJ2N-LY Type: DPDT; number of terminals: 8
- Coil voltage: 110V/120V AC; Contact capacity: 10A 240VAC
- Red mechanical indicatoe:It can intuitively judge whether the relay is attracted
- LED signal lamp : It can judge the AC or DC coil, and judge whether the coil is energized
- See more on Amazon...
Brand: VAMRONE | Manufacturer: YYUAN
Dimensions: 3.00 x 0.90 x 2.50 inches
See On Amazon #14
ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino
Asin: B08PP8HXVD | Model: ANMBEST_MD314-319 | PartNumber: ANMBEST_MD314-319 | Ean: 7903265708922
Reliable: Fault-Tolerant Design, Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation, Triggering More Reliable, More Stable..
High/Low Level Trigger Can Be Selected By Jumper. Very Versatile, You Can Reverse The Input Logic With The Jumper..
Easy To Install: Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
Equipped With High-Current Relay, Maximum Load: Ac250v 10A, 15A 125Vac, Dc30v 10A; Trigger Current Of Opto-Isolator: 5Ma..
Features
- It is 4 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient.
- Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A; Trigger current of opto-isolator: 5mA.
- RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
- EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper.
- See more on Amazon...
Brand: ANMBEST | Manufacturer: ANMBEST
See On Amazon #15
CG Solid State Relay SSR-25DD DC to DC Input 3-32VDC To Output 5-240VDC 25A Single Phase Plastic Cover
Asin: B08GNSPCND | Ean: 0774297736507 | UPC: 774297736507
♥ Total Size (Approximate):58 X 45 X 32Mm/2.3" X 1.8" X 1.26" (L*W*T); Net Weight:116G; Material:Metal, Plastic, Electronic Parts..
♥ Solid State Relay Ideal For Automatic Process Control Application, A Must Component For Temperature Controller And Other Machinery Control System..
♥ Ssr Application: With A Switch No Spark, No Noise,High Switching Speed,Anti-Corrosion,Moisture-Proof,Anti-Vibration,Long Life.High Reliability,Electromagnetic Compatibility And Other Characteristics..
♥ Product Name: Solid State Module Relay Ssr-25Dd, 3-32Vdc/5-220Vdc ; Current & Frequency:25A,50/60Hz..
Features
- What You Get Each package With 2 mini bag of thermal grease which apply on the back of the SSR to make the temperature dissipate faster.
- Product Name: solid state module relay SSR-25DD, 3-32VDC/5-220VDC ; Current & Frequency:25A,50/60Hz.
- Total size (approximate):58 x 45 x 32mm/2.3 x 1.8 x 1.26 (l*w*t); Net weight:116g; Material:metal, plastic, electronic parts.
- SSR Application: with a switch no spark, no noise,high switching speed,anti-corrosion,moisture-proof,anti-vibration,long life.high reliability,electromagnetic compatibility and other characteristics.
- Solid state relay ideal for automatic process control application, a must component for temperature controller and other machinery control system.
- See more on Amazon...
Brand: CGELE | Manufacturer: CGELE
Weight: 0.00 pounds
See On Amazon #16
BOJACK 3 Poles FLA 40 Amp Coil 240 VAC Air Conditioner Condenser Compressor Contactor AC Definite Purpose Contactor
Asin: B08PZF66NT | Model: BJ-40A3P-240V | PartNumber: BJ-40A3P-240V | Ean: 0762917165745 | UPC: 762917165745
Rated Current: Fla 40 Amp.
Max.Withstand Voltage: 600 Vac.
Coil Voltage:240 Vac.
Poles: 3 P.
Features
- Production Name: AC Contacto
- Poles: 3 P
- Rated Current: FLA 40 Amp
- Coil Voltage:240 VAC
- Max.Withstand Voltage: 600 VAC
- See more on Amazon...
Brand: BOJACK | Manufacturer: BOJACK
See On Amazon #17
Fastronix 40/60A Waterproof Relay 6 Pack
Asin: B016XDDMSE | Model: 900-001 | PartNumber: 900-001 | Ean: 0635414975103 | UPC: 635414975103
Features Negative Spike Suppression.
Standard Bosch Style Relay.
Can Be Used For Controlling Any 12V Device.
Includes 6 Waterproof Relays With Mounting Tabs For 1/4" Fastener.
Features
- 40/60 Amp Automotive Relay with 1/4" Leads
- Includes 6 Waterproof Relays with Mounting Tabs for 1/4 Fastener
- Features Negative Spike Suppression
- Can Be Used for Controlling Any 12V Device
- Standard Bosch Style Relay
- See more on Amazon...
Brand: Fastronix Solutions
Weight: 0.31 pounds
See On Amazon #18
OONO DPST 1NO 1NC 8Amp Power Relay Module, AC/DC 12V Control Voltage
Asin: B089Q6KLPQ | Model: F-1022 Series | PartNumber: F-1022 Series | Ean: 6954525591007
Compact Plastic Case And Wires Connects For Easy Mount. Led Indication For Relay Action..
This Is A Simple And Practical Passive Relay Module, Which Is Very Convenient To Use. It Can Support Both Normally Open And Normally Close. Two Screw Mounting Holes Are Convenient For You To Fix It On The Wall Or Wooden Board. Of Course, You Can Also Choose Not To Lock The Screw..
Output Switch Dpst 1No 1Nc(Double Pole Single Throw, 1X Normally Open And 1X Normally Close ), Rated Current 8A/250Vac Or 8A/30Vdc (One Switch)..
Features
- Input control signal: Voltage AC or DC 12V, Current 33mA.
- Output switch DPST 1NO 1NC(Double Pole Single Throw, 1x Normally Open and 1x Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch).
- Compact plastic case and wires connects for easy mount. LED indication for relay action.
- This is a simple and practical passive relay module, which is very convenient to use. It can support both Normally Open and Normally Close. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw.
- See more on Amazon...
Brand: OONO | Manufacturer: CZH-LABS
See On Amazon #19
CG Solid State Relay SSR-25DA DC to AC Input 3-32VDC To Output 24-480VAC 25A Single Phase Plastic Cover
Asin: B08GPJ1V2J | Model: DC to AC 25A | PartNumber: DC to AC 25A | Ean: 0774297736446 | UPC: 774297736446
♥ Total Size (Approximate):58 X 45 X 32Mm/2.3" X 1.8" X 1.26" (L*W*T); Net Weight:116G; Material:Metal, Plastic, Electronic Parts..
♥ Solid State Relay Ideal For Automatic Process Control Application, A Must Component For Temperature Controller And Other Machinery Control System..
♥ Ssr Application: With A Switch No Spark, No Noise,High Switching Speed,Anti-Corrosion,Moisture-Proof,Anti-Vibration,Long Life.High Reliability,Electromagnetic Compatibility And Other Characteristics..
♥ Product Name: Solid State Module Relay Ssr-25Da, 3-32Vdc/24-480Vac ; Current & Frequency:25A,50/60Hz..
Features
- What You Get Each package With 2 mini bag of thermal grease which apply on the back of the SSR to make the temperature dissipate faster.
- Product Name: solid state module relay SSR-25DA, 3-32VDC/24-480VAC ; Current & Frequency:25A,50/60Hz.
- Total size (approximate):58 x 45 x 32mm/2.3 x 1.8 x 1.26 (l*w*t); Net weight:116g; Material:metal, plastic, electronic parts.
- SSR Application: with a switch no spark, no noise,high switching speed,anti-corrosion,moisture-proof,anti-vibration,long life.high reliability,electromagnetic compatibility and other characteristics.
- Solid state relay ideal for automatic process control application, a must component for temperature controller and other machinery control system.
- See more on Amazon...
Brand: CGELE | Manufacturer: CGELE
See On Amazon #20
Sunlee controls 3 Pole 40 Amp contactor 120V coil DP Contactor HVAC Contactor
Asin: B0887RW4G1
Silver Cadmium Oxide Contacts.
Base Assembly Is Made From High Performance Bulk (Dough) Molding Compounds.
Coils Have Class F Insulation.
Ul 508/Ul 60947-4-1.
Features
- 3 pole 40 amp 120Volt coil
- UL 508/UL 60947-4-1
- Silver Cadmium Oxide Contacts
- Coils have class F insulation
- Base assembly is made from high performance Bulk (Dough) molding compounds
- See more on Amazon...
Brand: SUNLEE | Manufacturer: sunlee controls
See On Amazon
Looking For Something Else?
Search