Used GAM Bellows Coupling, 8mm*19mm, 8mm-19mm,0.315inches-0.748inches
Asin: B0D1G27TB9 | Model: GAM bellows coupling | PartNumber: GAM bellows coupling
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features
- Used GAM bellows coupling, 8mm-19mm,0.315inches-0.748inches outer diameter: 35mm length: 60mm support end diameter 10mm
- See more on Amazon...
Brand: Generic | Manufacturer: GAM
Dimensions: 2.36 x 1.38 x 1.38 inches | Weight: 1.76 Pounds
See On Amazon Similar To Used GAM Bellows Coupling 8mm19mm
#1
4Pcs 8mm Flange Coupling Connector, Rigid Guide Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors
Asin: B08335MYGW | Model: H420*4 | PartNumber: H420*4
Size:Inner Diameter: 8Mm,Height:13Mm,Fixed Hole Screw: M4..
Package Included:4Pcs 8Mm Flange Shaft Coupling + 1Pcs M4 Mini Hex Wrench + 8 X M4 Fastening Screw.
Widely Use: Used In Model Shaft Connection, Perfect Accessories For Rc Model Motor..
Features
- Durable Material: The coupling connector is made of 45# steel( it is better than copper and aluminum alloys ), heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement.
- Widely use: used in model shaft connection, perfect accessories for RC Model motor.
- Size:Inner Diameter: 8mm,Height:13mm,Fixed Hole Screw: M4.
- Package included:4Pcs 8mm Flange Shaft Coupling + 1Pcs M4 Mini Hex Wrench + 8 x M4 Fastening Screw
- See more on Amazon...
Brand: daier | Manufacturer: daier
See On Amazon #2
uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 Stainless Steel,Shaft Coupler Connector for 3D Printers, Motor Accessories,2pcs
Asin: B07P5YZKY5
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.97 x 1.18 inches
See On Amazon #3
Zeberoxyz 2PCS 8mm to 8mm Aluminium Plum Flexible Shaft Coupling Diameter20mm Length25mm 8x8mm Motor Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor 8x8mm
Asin: B08QVKMDC6 | Model: ZE032-1 | PartNumber: ZE032-1 | Ean: 0191170847318 | UPC: 191170847318
Super Torque Can Absorb Vibration, Appropriate A Large Torque Transmission.High Hardness,Durable,And Excellent Response,Not Easy To Loosen.
The Shaft Couplers Are Mainly Used For Cnc Machines,Servo Motors, Spindle, Step Motor Etc.
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components, The Coupling Can Be Disassembled And Used In Combination By Itself.
Shaft Coupler Material: Aluminum Alloy, Surface Oxidation Treatment; Type: Plum Shaped.
Features
- Size:L25mm x D20mm/0.98inch x 0.79inch( L*D) Bore Diameter: 8mm to 8mm / 0.31inch to 0.31inch
- Shaft Coupler Material: Aluminum alloy, Surface oxidation treatment; Type: Plum shaped
- Super torque can absorb vibration, appropriate a large torque transmission.High hardness,Durable,and excellent response,not easy to loosen
- Flexibility of coupling shaft removes stress between the motor and driving components, The coupling can be disassembled and used in combination by itself
- The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc
- See more on Amazon...
Brand: Zeberoxyz | Manufacturer: Zeberoxyz
Weight: 0.07 Pounds
See On Amazon #4
uxcell 8mm to 8mm Shaft Coupling 40mm Length 25mm Diameter Coupler Aluminum Alloy Joint Motor for 3D Printer CNC Machine DIY Encoder
Asin: B06X9GMM2N | Model: SYNCE007174 | PartNumber: SYNCE007174
Feature: Screw Type(Coiling Clamping); Main Color: Silver Tone.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Simplifies The Debugging Difficulty..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy; Size: 40X25mm/ 1.57X0.98Inch( L*D).
Features
- Shaft Usage: 8mm to 8mm / 0.31 to 0.31 inch
- Material: Aluminum alloy; Size: 40x25mm/ 1.57x0.98inch( L*D)
- Feature: Screw Type(Coiling Clamping); Main Color: Silver tone
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
2 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver. (2 pcs 8mm)
Asin: B0822425TT | Model: YJ0274MAT2-AN-CA | PartNumber: YJ0274MAT2-AN-CA | Ean: 0717877040137 | UPC: 717877040137
【Wide Range Of Use】Ancirs Flange Coupler Is Produced Based On International Flange Standard, Widely Used In Model Shaft Connection, Perfect Accessories For Rc Model Motor..
【Package Include】Ancirs Flange Coupler Is Packaged With 2 Pack 8Mm Flange Shaft Coupling + 2X M3 Mini Hex Wrench + 4 X M3 Fastening Screw..
【Standard Specification】Inner Diameter: 8Mm. Cylinder Outer Diameter: 10Mm. Cylinder Height: 10Mm. Base Diameter: 32Mm. Base Height: 2Mm..
Features
- Reliable Material Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement.
- Standard Specification Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 32mm. Base Height: 2mm.
- Wide Range of Use Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor.
- Package Include Ancirs flange coupler is packaged with 2 pack 8mm Flange Shaft Coupling + 2x M3 Mini Hex Wrench + 4 x M3 Fastening Screw.
- See more on Amazon...
Brand: ANCIRS | Manufacturer: ANCIRS
See On Amazon #6
uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 45# steel,Shaft Coupler Connector for 3D Printers, Motor Accessories
Asin: B07P6X92BT
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 inches
See On Amazon #7
4Pcs 8mm Aluminum Alloy Rigid Flange Coupling Motor Guide Shaft Coupler for DIY Motor Connector
Asin: B0B28HL3QH | Model: T747 | PartNumber: T747
Easy Installation, Comes With A Wrench For Easy Use..
Package Include: 4Pcs 8Mm Flange Shaft Coupling, 1Pcs M4 Hex Wrench, 8Pcs Fastening Screws.
Inner Diameter: 8Mm/0.31 Inch, Total Height: 13Mm/0.51 Inch, Cylinder Outer Diameter: 16Mm/0.63 Inch, Cylinder Height: 10Mm/0.39 Inch, Base Diameter: 32Mm/1.26 Inch, Base Height: 3Mm/0.12 Inch, Mounting Hole Distance: 24Mm/0.94 Inch,Four Small Holes Diameter Is 4Mm/0.15 Inch,M4 Fastening Screws.
Widely Used:The Flange Shaft Coupling Is Widely Used For Shaft Connection, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily.Perfect Accessories For Rc Model Motor..
Features
- Material: Aluminum Alloy(lighter than 45# steel), hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Widely Used:The flange shaft coupling is widely used for shaft connection, which can fix one shaft to a plane and install other parts on the shaft easily.perfect accessories for RC Model motor.
- Easy installation, Comes with a wrench for easy use.
- Inner Diameter: 8mm/0.31 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,Four small holes diameter is 4mm/0.15 inch,M4 Fastening Screws
- Package Include: 4pcs 8mm flange shaft coupling, 1pcs M4 Hex Wrench, 8pcs fastening screws
- See more on Amazon...
Brand: daier | Manufacturer: daier
See On Amazon #8
uxcell 8mmx10mm Clamp Tight Motor Shaft 2 Diaphragm Coupling Coupler
Asin: B078VR9V7J | Model: a17110100ux0191 | PartNumber: a17110100ux0191
Accommodates Angular, Parallel Misalignment.
Shaft Couplers Suitable For Connect Servo Motor, Stepper Motor, Encoder, Screw Driving, Machine Platform, Etc..
Aluminum Hubs For Light Weight, Stainless Steel Discs For Strength.
Clamp-Style Mount For Secure Attachment To Shaft.
Features
- 32mm Diameter X 42mm Length; 10000RPM rotational speed
- Clamp-style mount for secure attachment to shaft
- Accommodates angular, parallel misalignment
- Aluminum hubs for light weight, stainless steel discs for strength
- Shaft couplers suitable for connect servo motor, stepper motor, encoder, screw driving, machine platform, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
6Pack Treehobby Aluminium Alloy Shaft Coupling Rigid Stepper Motor Wheel Coupler Joint Connector for DIY Car Boat Airplane 3D Printers, 8mm to 8mm
Asin: B07QQM831T | Model: AS015D | PartNumber: AS015D | Ean: 0763846886671 | UPC: 763846886671
Size: 25 X 14Mm/0.98" X 0.55"(L*Dia).
Material: Aluminum Alloy.
Flex Capability Of The Coupler Removes Stress When Shafts Are Not Aligned Perfectly.Widely Used In Hardware,Diy Model,Robot,3D Printers And The Occasion Of The Mechanical.
Features
- Suitable for connecting two axis with different diameters, can also be connected with a motor axis, or connecting shafts of different diameters.
- Flex capability of the coupler removes stress when shafts are not aligned perfectly.Widely used in hardware,DIY model,robot,3D Printers and the occasion of the mechanical
- Size: 25 x 14mm/0.98 x 0.55(L*Dia)
- Material: Aluminum Alloy
- See more on Amazon...
Brand: Treehobby | Manufacturer: ZYCST
Dimensions: 0.98 x 0.55 x 0.55 inches | Weight: 0.10 Pounds
See On Amazon #10
uxcell 8mm to 19mm Shaft Plum Shaped Coupling Coupler 40mm Diameter 55mm Length
Asin: B078VTX6CD | Model: a17110100ux0241 | PartNumber: a17110100ux0241
Size: 55 X 40Mm/ 2.16 X 1.57 Inch( L*D); Main Color: Silver Tone,Red.
The Shaft Couplers Are Mainly Used For Servo Motors, Spindle, Step Motor Etc..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy, Polyurethane; Type: Plum Shaped.
Features
- Bore Diameter: 8mm to 19mm/ 0.31inch to 0.74inch
- Material: Aluminum alloy, polyurethane; Type: Plum shaped
- Size: 55 x 40mm/ 2.16 x 1.57 inch( L*D); Main Color: Silver tone,Red
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are mainly used for servo motors, spindle, step motor etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 5.91 x 3.94 inches
See On Amazon #11
Zeberoxyz 2PCS 8mm to 8mm Aluminium Plum Flexible Shaft Coupling Diameter25mm Length30mm 8x8mm Motor Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor 8x8mm
Asin: B08XTZX2T9 | Model: ZE048-6 | PartNumber: ZE048-6 | Ean: 0791783536663 | UPC: 791783536663
Super Torque Can Absorb Vibration, Appropriate A Large Torque Transmission.High Hardness,Durable,And Excellent Response,Not Easy To Loosen.
The Shaft Couplers Are Mainly Used For Cnc Machines,Servo Motors, Spindle, Step Motor Etc.
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components, The Coupling Can Be Disassembled And Used In Combination By Itself.
Material: Aluminum Alloy, Surface Oxidation Treatment; Type: Plum Shaped.
Features
- Size:L30mm x D25mm/1.18inch x 0.98inch( L*D), Bore Diameter:8mm to 8mm / 0.31inch to 0.31inch
- Material: Aluminum alloy, Surface oxidation treatment; Type: Plum shaped
- Super torque can absorb vibration, appropriate a large torque transmission.High hardness,Durable,and excellent response,not easy to loosen
- Flexibility of coupling shaft removes stress between the motor and driving components, The coupling can be disassembled and used in combination by itself
- The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc
- See more on Amazon...
Brand: Zeberoxyz | Manufacturer: Zeberoxyz
Dimensions: 1.18 x 0.00 x 0.98 Inches | Weight: 0.13 Pounds
See On Amazon #12
Cionyce 2 PCS 8mm Flange Shaft Coupling, Rigid Flange Coupling Motors Guide Shaft Support Coupler, High Hardness Coupling Connector Flanged Shaft Mount for DIY RC Model Motors
Asin: B0B63P9Q1K
【High-Precision】The Flange Coupling Is Made Of High-Precision Technology, Which Can Realize The Tight Connection Of The Two Shafts, And The Model Machine Is Not Easy To Separate During The Operation..
【Excellent After-Sales Service】We Focus On Quality And After-Sales Service. If You Are Dissatisfied With Our Products, Please Let Us Know. We Promise To Give You 100% Satisfactory After-Sales Service. No Risk. Don't Hesitate. Just Buy It..
【Wide Application】Flange Coupling Can Fix The Shaft On The Plane, And Can Easily Install Other Accessories On The Shaft, Widely Used In Model Shaft Connection, Perfect Accessories For Rc Model Motors, Etc..
【High Quality Material】Made Of High Quality Iron, Hardened By Heat Treatment And Electroplating, Thereby Improving The Toughness And Corrosion Resistance Of The Rigid Flange Coupling, Making The Flange Shaft More Stable And Easy To Install And Replace..
Features
- What You will Get 2 x Flange Shaft Coupling, wrench included. Inner diameter: 8mm, cylinder outer diameter: 16mm, base diameter: 32mm, suitable for all kinds of DIY handmade model accessories
- High Quality Material Made of high quality iron, hardened by heat treatment and electroplating, thereby improving the toughness and corrosion resistance of the rigid flange coupling, making the flange shaft more stable and easy to install and replace.
- High-precision The flange coupling is made of high-precision technology, which can realize the tight connection of the two shafts, and the model machine is not easy to separate during the operation.
- Wide application Flange coupling can fix the shaft on the plane, and can easily install other accessories on the shaft, widely used in model shaft connection, perfect accessories for RC model motors, etc.
- Excellent After-Sales Service We focus on quality and after-sales service. If you are dissatisfied with our products, please let us know. We promise to give you 100% satisfactory after-sales service. No risk. Don't hesitate. Just buy it.
- See more on Amazon...
Brand: Cionyce | Manufacturer: Cionyce
See On Amazon #13
Befenybay 2PCS 8mm to 8mm Aluminium Plum Flexible Shaft Coupling Diameter 20mm Length 25mm Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor 8x8mm
Asin: B07TG8641H | Model: BE-032-1-fba | PartNumber: BE-032-1-fba | Ean: 0824007302239 | UPC: 824007302239
Super Torque Can Absorb Vibration, Appropriate A Large Torque Transmission.High Hardness,And Excellent Response,Not Easy To Loosen.
The Shaft Couplers Are Mainly Used For Cnc Machines,Servo Motors, Spindle, Step Motor Etc.
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components.
Material: Aluminum Alloy Type: Plum Shaped.
Features
- Size:L25mm x D20mm/0.98inch x 0.79inch( L*D) Bore Diameter: 8mm to 8mm / 0.31inch to 0.31inch
- Material: Aluminum alloy Type: Plum shaped
- Super torque can absorb vibration, appropriate a large torque transmission.High hardness,and excellent response,not easy to loosen
- Flexibility of coupling shaft removes stress between the motor and driving components
- The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc
- See more on Amazon...
Brand: Befenybay | Manufacturer: befenybay
See On Amazon #14
Xnrtop 8mm to 8mm Shaft Coupling 25mm Length 20mm Diameter Stepper Motor Coupler Aluminum Alloy Joint Connector for 3D Printer CNC Machine DIY Encoder (Pack of 2
Asin: B081ZTRSXG | Model: L25XD20mm 8x8mm | PartNumber: L25XD20mm 8x8mm | Ean: 0745672481268 | UPC: 745672481268
Feature: Spline Shaft With Coiling Clamping; Main Color: Silver Tone.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Simplifies The Debugging Difficulty..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy; Size: 25X20mm/ 0.98X0.79Inch( L*D).
Features
- Shaft Usage: 8mm to 8mm / 0.31 to 0.31 inch
- Material: Aluminum alloy; Size: 25x20mm/ 0.98x0.79inch( L*D)
- Feature: Spline shaft with coiling clamping; Main Color: Silver tone
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty.
- See more on Amazon...
Brand: Xnrtop | Manufacturer: Xnrtop
Dimensions: 2.00 x 2.00 x 1.00 inches | Weight: 0.04 Pounds
See On Amazon #15
uxcell 2pcs Shaft Coupling 8mm to 8mm Bore L25xD20 Flexible Coupler Joint for Servo Stepped Motor
Asin: B07G6PGCC9 | Model: a18060800ux0156 | PartNumber: a18060800ux0156
Jaw Couplings Have Three Parts: Two Metallic Hubs And An Elastomer Insert Called An Element, But Commonly Called ""..
Wear Resistant ,High Hardness And Excellent Response.Super Elastic Torque Can Absorb Vibration, Appropriate A Large Torque Transmission..
Main Color: Silver Tone; Shaft Usage: 8Mm To 8Mm/0.31 Inch To 0.31 Inchtotal Size: 25 X 20Mm / 0.98 Inch X 0.79 Inch (L*D); Feature: Set Screwsthread Size: M3.
It Is Designed To Transmit Torque While Damping System Vibrations And Accommodating Misalignment To Protect Other Components From Damage..
Features
- General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs.
- It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage.
- Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called .
- Main Color: Silver Tone; Shaft Usage: 8mm to 8mm/0.31 inch to 0.31 inchTotal Size: 25 x 20mm / 0.98 inch x 0.79 inch (L*D); Feature: Set screwsThread Size: M3
- Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
4 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver.
Asin: B07PFX4RDJ | Model: YJ0274MA-AN-M | PartNumber: YJ0274MA-AN-M | Ean: 0717877039285 | UPC: 717877039285
【High Cost Performance】Ancirs Flange Coupler Is Packaged With 4 Pack 8Mm Flange Shaft Coupling + 4X M3 Mini Hex Wrench + 8 X M3 Fastening Screw..
【Satisfaction Guarantee】 If You Are Not Completely Satisfied With Ancirs Flange Coupling Connector, Just Contact Us Through Amazon Message And We Will Provide Feasible Solution For You As Promised..
【Standard Specification】Inner Diameter: 8Mm. Cylinder Outer Diameter: 10Mm. Cylinder Height: 10Mm. Base Diameter: 22Mm. Base Height: 2Mm..
【Wide Range Of Use】Ancirs Flange Coupler Is Produced Based On International Flange Standard, Widely Used In Model Shaft Connection, Perfect Accessories For Rc Model Motor..
Features
- Reliable Material Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement.
- Wide Range of Use Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor.
- High cost performance Ancirs flange coupler is packaged with 4 pack 8mm Flange Shaft Coupling + 4x M3 Mini Hex Wrench + 8 x M3 Fastening Screw.
- Standard Specification Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 22mm. Base Height: 2mm.
- Satisfaction Guarantee If you are not completely satisfied with ANCIRS Flange Coupling Connector, just contact us through Amazon message and we will provide feasible solution for you as promised.
- See more on Amazon...
Brand: ANCIRS | Manufacturer: ANCIRS
See On Amazon #17
Befenybay 2 PCS 8mm to 8mm Shaft Coupling 25mm Length 20mm Diameter Coupler Aluminum Alloy for 3D Printer CNC Machine (8x8mm)
Asin: B07WZJSLBL | Ean: 0880034254439 | UPC: 880034254439
Provides Torque Transmision And Alignment, Cost Effective Coupling Design.
Useful In Reprap 3D Printers And Small Cnc Machines.
Not Easy To Loosen.
Material: Aluminum Alloy With 25Mm X 20Mm(L X D)/ 0.98X0.79Inch( L*D).
Features
- Shaft Coupling Range: 8mm to 8mm / 0.31 to 0.31 inch
- Material: Aluminum alloy with 25mm x 20mm(L x D)/ 0.98x0.79inch( L*D)
- Provides torque transmision and alignment, Cost effective coupling design
- Not easy to loosen
- Useful in RepRap 3D Printers and small CNC machines
- See more on Amazon...
Brand: Befenybay | Manufacturer: Befenybay
See On Amazon #18
uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories,Black
Asin: B08HCWXQD7
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 8mm to 8mm; Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
Xnrtop 8mm to 8mm Shaft Coupling 25mm Length 18mm Diameter Stepper Motor Coupler Aluminum Alloy Joint Connector for 3D Printer CNC Machine DIY Encoder(Pack of 2
Asin: B07YD45PY8 | Model: 8x8MM（D18*L25） | PartNumber: 8x8MM（D18*L25） | Ean: 0745672480902 | UPC: 745672480902
Feature: Set Screws (Coiling Clamping); Main Color: Silver Tone.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Simplifies The Debugging Difficulty..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy; Size: 25X18mm/ 0.98X0.71 Inch( L*D).
Features
- Shaft Usage: 8mm to 8mm / 0.31 to 0.31 inch
- Material: Aluminum alloy; Size: 25x18mm/ 0.98x0.71 inch( L*D)
- Feature: Set screws (Coiling Clamping); Main Color: Silver tone
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty.
- See more on Amazon...
Brand: Xnrtop | Manufacturer: Xnrtop
Dimensions: 2.00 x 2.00 x 1.00 Inches | Weight: 0.04 Pounds
See On Amazon #20
5PCS 8mm to 8mm Flexible Couplings 25mm Length 19mm Diameter Shaft Couplings for 3D Printer and CNC Machine
Asin: B0BBQKCX5Y | Model: 5D19CPLS-8-8 | PartNumber: 5D19CPLS-8-8 | Ean: 0723497861236 | UPC: 723497861236
Material: Alloy Steel.
For 3D Printer , Cnc Machine And Shaft.
Total Size:25Mm Length 19Mm Diameter,0.98 Inch X 0.75 Inch.
Features
- 5PCS 8mm to 8mm Flexible Couplings
- Total Size:25mm Length 19mm Diameter,0.98 inch x 0.75 inch
- Material: alloy steel
- for 3D Printer , CNC Machine and Shaft
- See more on Amazon...
Brand: GUICGOC | Manufacturer: GUICGOC
See On Amazon
Looking For Something Else?
Search