BIGTREETECH Eddy Coil V1.0 Auto Bed Leveling Sensor for EBB36 EBB42 CAN or I2C Port Board Support Klipper Compatible with Voron2.4 Stealthburner Trident (TL-Q5MC2)
Asin: B0D1VCGWYV
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3. Btt Eddy Coil Weighs As Little As 6G, Effectively Reducing The Impact Of Exercise; 0.0005Mm Precision Precise Leveling; And It Has A Small Size And Strong Compatibility; Anti Fooling Design, The Shell Is Set To A Limited Height, So There Is No Need To Worry About Metal Parts On The Coil Affecting Its Leveling And Use, Worry Free Installation Into The 3D Printer System..
5. Eddy Coil Does Not Have Thermal Compensation Function, So It Is Not Suitable For Z-Axis Zeroing. It Is Mainly Used In Conjunction With Existing Z-Axis Return 3D Printers (Such As Limit Switches/Microprobes/Bltouch). When Used In Conjunction With Existing Z-Axis 3D Printers, Eddy Coil Provides Fast Bed Scanning Functionality. In Addition, We Have Designed A Print Holder That Allows For The Simultaneous Installation And Use Of Eddy Coil And Chaoticlab Cnc Tap On The Extrusion Head..
4. It Must Run On A Metal Spring Steel Plate And Avoid Interference From Independent Magnets. If The Hot Bed Uses A Circular Magnet Scheme (Such As Prusa), It Will Cause Eddy Coil To Not Work Properly; If It Is A Uniform Soft Magnet, It Can Also Be Used, Such As The Hot Bed Solution Of Pei Steel Plate+Soft Magnet..
2. Btt Eddy Coil Has A Fast Leveling Speed, And The Printing Environment In The Btt Laboratory Can Be Leveled Within 20 Seconds, Effectively Solving The Problem Of Slow Leveling For Fdm Printers And Being More Friendly To Large-Sized Printers..
Features
- 1.BIGTREETECH Eddy Coil ONLY supports Klipper. It needs to be used with tool boards with I2C interfaces such as BTT EBB36/42 CAN, and the wiring provided with Eddy Coil can be directly connected to EBB36/42 CAN. (Eddy Coil+EBB36/42 CAN=Eddy USB)
- 2. BTT Eddy Coil has a fast leveling speed, and the printing environment in the BTT laboratory can be leveled within 20 seconds, effectively solving the problem of slow leveling for FDM printers and being more friendly to large-sized printers.
- 3. BTT Eddy Coil weighs as little as 6g, effectively reducing the impact of exercise; 0.0005mm precision precise leveling; And it has a small size and strong compatibility; Anti fooling design, the shell is set to a limited height, so there is no need to worry about metal parts on the coil affecting its leveling and use, worry free installation into the 3D printer system.
- 4. It must run on a metal spring steel plate and avoid interference from independent magnets. If the hot bed uses a circular magnet scheme (such as Prusa), it will cause Eddy Coil to not work properly; If it is a uniform soft magnet, it can also be used, such as the hot bed solution of PEI steel plate+soft magnet.
- 5. Eddy Coil does not have thermal compensation function, so it is not suitable for Z-axis zeroing. It is mainly used in conjunction with existing Z-axis return 3D printers (such as limit switches/Microprobes/BLtouch). When used in conjunction with existing Z-axis 3D printers, Eddy Coil provides fast bed scanning functionality. In addition, we have designed a print holder that allows for the simultaneous installation and use of Eddy Coil and Chaoticlab CNC Tap on the extrusion head.
- See more on Amazon...
Brand: BIQU | Manufacturer: Octobigtree
See On Amazon Similar To BIGTREETECH Eddy Coil V1.0 Auto
#1
BIGTREETECH Eddy V1.0 High Speed Auto Bed Leveling Sensor for Voron 2.4/Trident,VZbot,CoreXY,I3 Series Running Klipper 3D Printer Compatible with Octopus V1.1,Octopus Pro,SKR Mini E3 V3.0,Manta M8p
Asin: B0D14M62W3 | Model: BIGTREETECH Eddy V1.0 | PartNumber: BIGTREETECH Eddy V1.0
✅Perfect For Voron Stealthburner: Bigtreetech Eddy Auto Bed Leveling Sensor Easily Attached To Voron V2.4&Trident Tl-Q5mc2 (Pl-08N) Location For Quick And Convenient Integration, Suitable For Ender, Corexy, Voron, Vzbot, I3 Series 3D Printers..
✅Widely Compatible: Btt Eddy V1.0 Comes With Customized A 2.5M Usb Cable, Easier Wiring, Compatible With Btt Pi + Octopus Pro/Octopus V1.1/Octopus Max Ez/Kraken/Skr Mini E3 V3.0/Skr V1.4 Turbo/Skr 3/Ez, Skr Pico Or Cb1/Cb2 + Manta M8p/M5p/M4p, Manta E3 Ez Motherboards..
💓After-Sales Service: Notes: The Spring Steel Sheet With A Magnetic Sticker Heatbed Solution Works Well With Eddy Series, Such As The Hot Bed Solution Of Pei Steel Plate+Soft Magnet. But It Is Essential To Avoid Interference From Standalone Magnets, Such As Round Magnet Hotbed (Prusa). Regardless Of The Any Problems You Encounter During The Installation And Use Of Eddy, Please Contact Us In Time And We Will Provide You With Detailed Solutions..
✅Temperature Compensation: Eddy V1.0 Features Temperature Compensation And Z-Axis Homing, Ensuring Consistent, Precise Leveling Regardless Of Temperature Fluctuations. Error-Proof Installation, Customized Shell Effectively Shields External Metal Interference While Leaving Space For The Coil. It Is Easy To Install And Does Not Require Measurement, Which Improves User Experience And Ensures Detection Accuracy..
✅20 Sec High Speed Leveling: Btt Eddy V1.0 High-Speed Leveling Sensor Adopts Rp2040 Main Control Chip. The 250*250Mm Heatbed Is Leveled Within 20 Sec. Weight Only 6G, Super Light&Small, Reduce The Impact Of Exercise. 0.0005Mm High Precision. Friendly For Large-Size Printers, High-Precision Leveling Can Be Easily Achieved..
Features
- Designed for Klipper: BIGTREETECH Eddy V1.0 high speed auto bed leveling sensor is designed for Klipper. Adopts inductive leveling technology, a high-frequency magnetic field is used to induce eddy currents in the conductor, and precise leveling is completed by measuring the intensity of the eddy currents.
- 20 sec High Speed Leveling: BTT Eddy V1.0 high-speed leveling sensor adopts RP2040 main control chip. The 250*250mm heatbed is leveled within 20 sec. Weight only 6g, super light&small, reduce the impact of exercise. 0.0005mm high precision. Friendly for large-size printers, high-precision leveling can be easily achieved.
- Perfect for Voron StealthBurner: BIGTREETECH Eddy auto bed leveling sensor easily attached to Voron V2.4&Trident TL-Q5MC2 (PL-08N) location for quick and convenient integration, suitable for Ender, CoreXY, Voron, Vzbot, I3 series 3D printers.
- Temperature Compensation: Eddy V1.0 features temperature compensation and Z-axis homing, ensuring consistent, precise leveling regardless of temperature fluctuations. Error-proof installation, customized shell effectively shields external metal interference while leaving space for the coil. It is easy to install and does not require measurement, which improves user experience and ensures detection accuracy.
- Widely Compatible: BTT Eddy V1.0 comes with customized a 2.5M USB cable, easier wiring, compatible with BTT Pi + Octopus Pro/Octopus V1.1/Octopus Max EZ/Kraken/SKR Mini E3 V3.0/SKR V1.4 Turbo/SKR 3/EZ, SKR Pico or CB1/CB2 + Manta M8P/M5P/M4P, Manta E3 EZ motherboards.
- After-sales Service: Notes: The spring steel sheet with a magnetic sticker heatbed solution works well with Eddy series, such as the hot bed solution of PEI steel plate+soft magnet. but it is essential to avoid interference from standalone magnets, such as round magnet hotbed (Prusa). Regardless of the any problems you encounter during the installation and use of Eddy, please contact us in time and we will provide you with detailed solutions.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
See On Amazon #2
BIGTREETECH Direct Relay V1.2 Automatic Shutdown Module After Printing Support Resume Printing While Power Off for SKR Mini E3 V3.0 Octopus V1.1 Manta M4P/M5P/M8P/SKR V1.4 Turbo Ender 3 3D Printer
Asin: B07QJ4MZVN | Model: ZZB000239 | PartNumber: ZZB000239 | Ean: 0778601687363 | UPC: 778601687363
Bigtreetech Relay V1.2 Is Easy To Understand, Its Logo Is Clearly Visible And Its Function Is Practical..
Btt Relay V1.2 Compatible With Bigtreetech Skr Mini E3 V3.0/Skr Mini E3 V2.0/Skr V1.4 Turbo/Manta M4p/Mp/M8p/Octopus Pro/Octopus V1.1/Mks Gen L ...3D Printer Control Board.
The Function Is To Automatically Detect Whether The 3D Printing Of The Project Printer Is Completed. When It Is Detected That The Project Is Printed, The Power Can Be Automatically Turned Off. The Goal Is To Create An Automated 3D Printing Environment With Low Carbon Content, Environmental Protection, Energy Savings And Reduced Consumption..
Features
- BIGTREETECH Relay V1.2 module is the first automatic shutdown module independently developed by BIGTREETECH Tecnologia.
- The function is to automatically detect whether the 3D printing of the project printer is completed. When it is detected that the project is printed, the power can be automatically turned off. The goal is to create an automated 3D printing environment with low carbon content, environmental protection, energy savings and reduced consumption.
- BIGTREETECH relay V1.2 is easy to understand, its logo is clearly visible and its function is practical.
- BTT Relay V1.2 Compatible with BIGTREETECH SKR MINI E3 V3.0/SKR MINI E3 V2.0/SKR V1.4 Turbo/Manta M4p/MP/M8P/Octopus pro/Octopus V1.1/MKS GEN L ...3D Printer Control board
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH DIRECT
See On Amazon #3
BIGTREETECH CAN Adapter V1.0 Module Expainsion Module 3D Printer Parts for BTT PI V1.2 Control Board CAN Bus Function
Asin: B0C4NX5YGH | Model: U2C Module V1.0 | PartNumber: U2C Module V1.0
✅The Surface Of The Pcb Adopts The Enig Process..
✅Pop A Specially Designed U2c Module Onto The Board To Enable The Dedicated Can Bus Port,Notes: Using The Usb2 Interface Of Soc For Communication.
✅Support Firmware Update For The Motherboard Through Swd Or Hardware Dfu..
✅The Type-C Port Is Equipped With Esd Protection To Prevent Static Electricity From Damaging The Hardware..
Features
- BIGTREETECH CAN Adapter V1.0 module is Design for BIGTREETECH PI V1.2 control board,Support CAN bus connection, long data transmission, strong anti-noise ability, strong real-time performance and high reliability.
- The TYPE-C port is equipped with ESD protection to prevent static electricity from damaging the hardware.
- The surface of the PCB adopts the ENIG process.
- Support firmware update for the motherboard through SWD or hardware DFU.
- Pop a specially designed U2C module onto the board to enable the dedicated CAN Bus port,Notes: Using the USB2 interface of SOC for communication
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.03 x 1.60 x 0.50 inches
See On Amazon #4
BIGTREETECH CB1 eMMC V1.1 Control Board (1GB+32GB), Support Klipper Upgrade on CB1 V2.2 Compatible with Raspberry-Pi 3B/4B, Manta M8P/M5P/M4P, Manta E3EZ Motherboard, Pi4B Adapter 3D Printer Part
Asin: B0C1NJ3DRM | Model: KINGPRINTER-1020000430 | PartNumber: KINGPRINTER-1020000430
3. Bigtreetech Cb1 Emmc Is Equipped With Quad Core 64 Bit Arm Cortex-A53 @ 1.5Ghz Processor, 1Gb Ddr3 Memory Chip, 32Gb Storage, With Powerful Performance..
5. Bigtreetech Cb1 Emmc Runs The Linux System Efficiently, Supports Ubuntu, Programmable, And Is Convenient For Users To Diy; The Gpu Is Mali G31 Mp2, Which Supports Opengl3.2..
4. The Core Control Board Reserves Hdmi2.0A Display Interface To Support 2K Display; Onboard Usb2.0 Port; Onboard 100M Ethernet Interface And Supports Wifi Transmission..
2. The Same Btb Header As The Raspberry-Pi Cm4; Cb1 Combined With Pi4b, The Performance Is Almost Close To The Raspberry-Pi 3B, And Can Be An Alternative To The Raspberry-Pi 3B..
Features
- 1. Why choose CB1 eMMC? Add Samsung Electronics' eMMC5.1 technology, with a read speed of 300MB/s and a write speed of 200MB/s; The storage method is more stable, which can avoid the problem of card slot damage and inability to continue using the product; Low power consumption of only 0.5w.
- 2. The same BTB header as the Raspberry-Pi CM4; CB1 combined with Pi4B, the performance is almost close to the Raspberry-Pi 3B, and can be an alternative to the Raspberry-Pi 3B.
- 3. BIGTREETECH CB1 eMMC is equipped with quad core 64 bit ARM Cortex-A53 @ 1.5GHz processor, 1GB DDR3 memory chip, 32GB storage, with powerful performance.
- 4. The core control board reserves HDMI2.0A display interface to support 2K display; onboard USB2.0 port; Onboard 100M Ethernet interface and supports WIFI transmission.
- 5. BIGTREETECH CB1 eMMC runs the Linux system efficiently, supports Ubuntu, programmable, and is convenient for users to DIY; The GPU is Mali G31 MP2, which supports OpenGL3.2.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #5
BIGTREETECH CB1 V2.2 Core Control Board for 3D Printers to Run Klipper, As CM4 Compatible with Rasp-Berry Pi4, BTT Pi4B, Manta E3EZ M8P M4P M5P Mainboard, 1GB DDR3 RAM, 100M Ethernet, Support HDMI
Asin: B0BXP6K3H7
🔥【Interfaces】Bigtreetech Cb1 Comes With Hdmi 2.0A Interface To Support 4K Displays. And Also Onboard Usb2.0 Interface..
🔥【Easy To Run Klipper】With The Same Btb Connector As Cm4, Cb1 Can Be Directly Mounted On Bigtreetech Manta Series Motherboards: Manta E3ez/Manta M4p/Manta M5p/Manta M8p To Run Klipper Easier And More Reliable. Combining With Btt Pi4b Or Rasp. Pi Base Board, Cb1 Can Also Be Used On Skr Mini E3 V3.0/Skr 3/Skr 3 Ez/Skr Pico/Octopus Pro Etc. To Run Klipper..
🔥【Internet Info】Bigtreetech Cb1 Core Control Board Supports 100M Ethernet And 100M Wifi 2.4G/802.11 B/G/N..
🔥【Powerful System】Btt Cb1 Adopts Quad-Core 64-Bit Cortex-A53 @1.5Ghz Processor And Mali G31 Mp2 Gpu, Supporting Opengl3.2; Equipping With 1Gb Ddr3 Memory Chip, Cb1 Is Programmable And Powerful To Run Linux And Supports Debian..
Features
- BTB Design BIGTREETECH CB1 core control board features the same board to board header as CM4. Thus BTT CB1 can be directly mounted both on your Rasp-berry Pi and BIGTREETECH Pi4B base board to run klipper in a highly cost-effective way.
- Powerful System BTT CB1 adopts quad-core 64-bit Cortex-A53 @1.5GHz processor and Mali G31 MP2 GPU, supporting OpenGL3.2; Equipping with 1GB DDR3 memory chip, CB1 is programmable and powerful to run Linux and supports Debian.
- Interfaces BIGTREETECH CB1 comes with HDMI 2.0A interface to support 4K displays. And also onboard USB2.0 interface.
- Internet Info BIGTREETECH CB1 core control board supports 100M Ethernet and 100M Wifi 2.4G/802.11 b/g/n.
- Easy to Run Klipper With the same BTB connector as CM4, CB1 can be directly mounted on BIGTREETECH Manta Series Motherboards: Manta E3EZ/Manta M4P/Manta M5P/Manta M8P to run Klipper easier and more reliable. Combining with BTT Pi4B or Rasp. Pi base board, CB1 can also be used on SKR MINI E3 V3.0/SKR 3/SKR 3 EZ/SKR Pico/Octopus Pro etc. to run Klipper.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #6
Woedpez BIGTREETECH BTT EXP-MOT V1.0 Driver Expansion Module for SKR V1.4 Turbo SKR SKR V1.3 Motherboard 3D Printer Parts Bigtreetech Module
Asin: B0CKLNSW4X | Ean: 7551391604986
Number Of For Module Expansion: 3..
Input Power: Dc12v /Dc24v..
Voltage: Dc3.3V /Dc5v..
Driver Mode Optional: Step/Dir,Uart,Spi..
Features
- Product name: EXP-MOT V1.0 module.
- Driver Mode Optional: STEP/DIR,UART,SPI.
- Number of for module expansion: 3.
- voltage: DC3.3V /DC5V.
- Input power: DC12V /DC24V.
- See more on Amazon...
Brand: Woedpez | Manufacturer: Woedpez
See On Amazon #7
Necvior BIGTREETECH Module BTT EXP-MOT V1.0 Driver Expansion Module 3D Printer Parts for SKR 2 3 SKR V1.4 Turbo Octopus V1.1 Btt Exp-mot V1.0 Module
Asin: B0CQLW2FMW | Ean: 7551421449594
Voltage: Dc3.3V /Dc5v..
Input Power: Dc12v /Dc24v..
Driver Mode Optional: Step/Dir,Uart,Spi..
Product Name: Exp-Mot V1.0 Module..
Features
- Number of for module expansion: 3.
- Product name: EXP-MOT V1.0 module.
- voltage: DC3.3V /DC5V.
- Driver Mode Optional: STEP/DIR,UART,SPI.
- Input power: DC12V /DC24V.
- See more on Amazon...
Brand: Necvior | Manufacturer: Necvior
See On Amazon #8
BIGTREETECH EBB42 CAN Bus + CNC Voron Tap V2.0 All Metal CNC Machining Kit
Asin: B0CQCF86BK
🆕Ultra High Precision：Voron Tap Accuracy Reaches 0.0004Mm. It Is Lightweight 68G (Including Mounting Screws), Which Reduces The Impact On The Weight Of The Extrusion Head. The Thin And Light Body Does Not Lose The Stroke And Greatly Improves The Tap Leveling Accuracy.Maintaining The Original Xy Stroke, Preserves Full Range Motion And Build Capacity, Letting You Unleash Your Voron's Capabilities.At The Same Time, It Has No Requirements For The Printing Platform Material..
🆕High Quality Mgnh7：Compared To Mgnh9, Mgnh7 Is Lighter And Thinner.This Allows Us To Minimize The Burden On The Extruder And Avoid Lossof Y Stroke. Meanwhile, Mgnh7 Offers The Same Sturdiness As Mgnh9.We Specifically Chose Reputable Hiwin Linear Guideways.Designed Steel Limit Nuts, And A Magnetic Limit Assemblyto Maximize Sturdy And Reliable Construction.This Gives The Cnc Voron Tap V2 Excellent Input Shaper Data..
🆕The New Upgrade：Tap V2: Transmissive Photomicrosensor With 0.3Mm Wide Aperture,Experience Higher Accuracy And Reliability With The Omron Ee-Sx4320.Expanding The Voltage Range In The Upgraded V2 Tosupport 5-24V For Flexibility.High Temperature Reliability (70C To 100C), No Need For Separate Z-Endstop, With Crash Protection.
💖Easy To Use: It Is A 36-Step (42-Step) Motor Extruder Nozzle Adapter Board, Which Can Communicate Through Usb Or Can, Which Greatly Simplifies Wiring. Boot And Reset Buttons Are Reserved On The Motherboard, Users Can Enter Dfu Mode Through Usb To Update The Firmware.
Features
- Smart Upgrade: Onboard MAX31865, support 2-wire/4-wire PT100/PT1000 selection, support CAN or USB communication, among which CAN terminal resistance 120R can be selected by jumper cap, and reserved CAN expansion interface, reserved RGB interface , to meet the lighting needs
- Easy to Use: It is a 36-step (42-step) motor extruder nozzle adapter board, which can communicate through USB or CAN, which greatly simplifies wiring. BOOT and RESET buttons are reserved on the motherboard, users can enter DFU mode through USB to update the firmware
- Ultra High Precision Voron tap accuracy reaches 0.0004mm. It is lightweight 68g (including mounting screws), which reduces the impact on the weight of the extrusion head. The thin and light body does not lose the stroke and greatly improves the tap leveling accuracy.maintaining the Original XY Stroke, preserves full range motion and build capacity, letting you unleash your Voron's capabilities.At the same time, it has no requirements for the printing platform material.
- The New Upgrade Tap V2: Transmissive Photomicrosensor with 0.3mm Wide Aperture,Experience higher accuracy and reliability with the OMRON EE-SX4320.Expanding the voltage range in the upgraded V2 tosupport 5-24V for flexibility.high temperature reliability (70C to 100C), no need for separate Z-endstop, with crash protection
- High Quality MGNH7 Compared to MGNH9, MGNH7 is lighter and thinner.This allows us to minimize the burden on the extruder and avoid lossof Y Stroke. Meanwhile, MGNH7 offers the same sturdiness as MGNH9.We specifically chose reputable HIWIN linear guideways.designed steel limit nuts, and a magnetic limit assemblyto maximize sturdy and reliable construction.This gives the CNC Voron Tap V2 excellent Input Shaper data.
- See more on Amazon...
Brand: BIQU
See On Amazon #9
BIGTREETECH Smart Filament Runout Sensor V2.0 + BIQU H2 500 Direct Drive Extruder, for BIQU BX BIQU B1 SE Plus DIY 3D Printer Kits
Asin: B0CGJ15LMP
✔️【Hardened Steel Nozzle】Upgraded Hardened Steel Nozzle Of Biqu H2 500℃ Can Resist High Temperature Printing And Helps Reduce The Possibility Of Nozzle Clogging And Contributes To Smooth Extrusion..
✔️【Wide Compatibility】Bigtreetech Filament Jam Sensor Can Be Mounted Both On Bowden Extruder And Direct Drive Extruders. It Supports Any Motherboard With Available I/O Ports(Endstop, Filament Detection, Bl Touch, Induction Sensor, Etc), Like Skr Mini E3 V3.0 / Skr3 / Skr 3 Ez / Skrat / Manta E3ez / Octopus Pro. And Sfs V2.0 Is Compatible With Klipper, Marlin And Reprap Firmwares..
✔️【Smart Filament Sensor】Bigtreetech Sfs V2.0 Can Not Only Detect Filament Runout, But Also Filament Breakage, Filament Clogging, Filament Tying And Even Extruder Malfunction. Detecting Above Abnormal Extrusion Cases, Btt Sfs V2.0 Will Send Error Alerts To Screen And Automatically Stop Printing To Keep You Away From Filament And Electricity Waste..
✔️【All Metal Hotend】Biqu Adopts Grade A Copper-Titanium Alloy To Cast The Heat Break Of Our H2 500℃ Dual Gear Extruder. Such Premium Material All Over The Market Endows The Extruder With Excellent Heat Insulation. The Upgrade Heating Block Is Made Of Quality Nickel-Coated Red Copper To Melt Filament Faster And Better Heat Conduction..
Features
- 500 High Temp Printing BIQU H2 500 direct drive extruder is upgrated to support maximum 500 degree celsius high temp. priting. Our modified hotend meets the needs for filament extrusion with high temperature such as TPE/TPE/ PEEK, PEI/carbon fiber/nylon and other filament.
- All Metal Hotend BIQU adopts grade A copper-titanium alloy to cast the heat break of our H2 500 dual gear extruder. Such premium material all over the market endows the extruder with excellent heat insulation. The upgrade heating block is made of quality nickel-coated red copper to melt filament faster and better heat conduction.
- Hardened Steel Nozzle Upgraded hardened steel nozzle of BIQU H2 500 can resist high temperature printing and helps reduce the possibility of nozzle clogging and contributes to smooth extrusion.
- Smart Filament Sensor BIGTREETECH SFS V2.0 can not only detect filament runout, but also filament breakage, filament clogging, filament tying and even extruder malfunction. Detecting above abnormal extrusion cases, BTT SFS V2.0 will send error alerts to screen and automatically stop printing to keep you away from filament and electricity waste.
- Wide Compatibility BIGTREETECH filament jam sensor can be mounted both on bowden extruder and direct drive extruders. It supports any motherboard with available I/O ports(Endstop, filament detection, BL touch, induction sensor, etc), like SKR MINI E3 V3.0 / SKR3 / SKR 3 EZ / SKrat / Manta E3EZ / Octopus Pro. And SFS V2.0 is compatible with Klipper, Marlin and RepRap firmwares.
- See more on Amazon...
Brand: BIQU
See On Amazon
Looking For Something Else?
Search