Melin Tool - Buying Guide
Last Updated: 05/21/2024
Share on
Bestselling from Melin Tool on Amazon
- Melin Tool E-M Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Hel...
- Melin Tool CC-L Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg He...
- Melin Tool CCMGS-M-M Carbide Square Nose End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 4...
- Melin Tool-16100 RCMG Carbide Corner Rounding End Mill, Uncoated (Bright) Finish, Non-Center Cutting...
- Melin Tool ARMG Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 25 Deg Helix, 1 Flutes...
- Melin Tool AMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 1.5" O...
- Melin Tool - 56245 CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flute...
- Melin Tool EMG-B Carbide Ball Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 1.500...
- Melin Tool CC-EE Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg H...
- Melin Tool CC Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Heli...
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Melin Tool E-M Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 5.5000" Overall Length, 1" Cutting Diameter, 1" Shank Diameter
Asin: B0083LQNEU | Model: 12292 | PartNumber: 12292 | Ean: 0733438122920 | UPC: 733438122920
Weldon Shanks Feature A Round Shank With One Of More Flats Machined Into The Side For Easy Indexing And Alignment.
Used For General Purpose Milling In Mos Materials Of Medium And Tough Alloy Materials Such As Stainless Steel, Nickel Base Alloy, Brass, Iron Etc.
3 Flutes Usually Allow Feed Rates 50 Percent Faster Than 2 Flute Tools.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
- 3 flutes usually allow feed rates 50 percent faster than 2 flute tools
- Used for general purpose milling in mos materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #2
Melin Tool CC-L Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 5.2500" Overall Length, 0.7500" Cutting Diameter, 0.75" Shank Diameter
Asin: B0083KGU9O | Model: 11602 | PartNumber: 11602 | Ean: 0733438116028 | UPC: 733438116028
Weldon Shanks Feature A Round Shank With One Of More Flats Machined Into The Side For Easy Indexing And Alignment.
30 Degree Helix Angle.
Used For General Purpose Milling In Most Materials Of Medium And Tough Alloy Materials Such As Stainless Steel, Nickel Base Alloy, Brass, Iron, Etc.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
- Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc
- 30 Degree helix angle
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
Amazon Price: $33.36 | as of 05/21/2024
(11:00pm pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #3
Melin Tool CCMGS-M-M Carbide Square Nose End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 51mm Overall Length, 7mm Cutting Diameter, 8mm Shank Diameter
Asin: B0083L9F7C | Model: 14037 | PartNumber: 14037 | Ean: 0733438140375 | UPC: 733438140375
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
30 Degrees Helix Angle.
General Purpose Square End.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- General purpose square end
- 30 Degrees helix angle
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #4
Melin Tool-16100 RCMG Carbide Corner Rounding End Mill, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 4 Flutes, 2.5000" Overall Length, 0.125" Cutting Diameter, 0.25" Shank Diameter
Asin: B0006Q44QO | Model: 16100 | PartNumber: 16100 | Ean: 0733438161004 | UPC: 733438161004
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Radius Is Form Relieved.
Can Provide Uniform Finish On Corners.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can provide uniform finish on corners
- Radius is form relieved
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #5
Melin Tool ARMG Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 25 Deg Helix, 1 Flutes, 2" Overall Length, 0.0625" Cutting Diameter, 0.25" Shank Diameter
Asin: B0083K2XTK | Model: 12865 | PartNumber: 12865 | Ean: 0733438128656 | UPC: 733438128656
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Polished Single Flute Design.
Unique Rake And Clearance Angles For Fast Removal Rates.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Unique rake and clearance angles for fast removal rates
- Polished single flute design
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
Amazon Price: $16.07 | as of 05/21/2024
(11:00pm pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #6
Melin Tool AMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 1.5" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
Asin: B0006Q1480 | Model: 16083 | PartNumber: 16083 | Ean: 0733438160830 | UPC: 733438160830
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Available In 90 Degree Points.
Can Be Used For Drilling, Slotting, Chamfering, And Profile Milling.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can be used for drilling, slotting, chamfering, and profile milling
- Available in 90 degree points
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #7
Melin Tool - 56245 CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 1.5000" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0083LBEYY | Model: 56245 | PartNumber: 56245 | Ean: 0733438562450 | UPC: 733438562450
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Designed To Cut Materials Ranging From Nickel Base Alloy, Stainless, Tough Alloys, Abrasive And Nonferrous.
Use For Radius And Contouring Part Surfaces.
Aluminum Titanium Nitride Is Similar To Tialn But With A Higher Aluminum Content For Improved Hardness And Smoothness.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
- Round shanks allow use with a wide variety of toolholding systems
- Use for radius and contouring part surfaces
- Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #8
Melin Tool EMG-B Carbide Ball Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 1.5000" Overall Length, 0.0938" Cutting Diameter, 0.125" Shank Diameter
Asin: B0083LT1EE | Model: 17822 | PartNumber: 17822 | Ean: 0733438178224 | UPC: 733438178224
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Used For General Purpose Milling In Most Materials Of Medium Hardness Such As Steel, Brass, Iron, And Nonferrous Materials.
3 Flute Design Will Usually Allow Feed Rates 50 Percent Faster Than 2 Flute Tools.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- 3 flute design will usually allow feed rates 50 percent faster than 2 flute tools
- Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and nonferrous materials
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #9
Melin Tool CC-EE Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6" Overall Length, 0.5000" Cutting Diameter, 0.5" Shank Diameter
Asin: B0083KDWUE | Model: 11344 | PartNumber: 11344 | Ean: 0733438113447 | UPC: 733438113447
Weldon Shanks Feature A Round Shank With One Of More Flats Machined Into The Side For Easy Indexing And Alignment.
30 Degree Helix Angle.
Used For General Purpose Milling In Most Materials Of Medium And Tough Alloy Materials Such As Stainless Steel, Nickel Base Alloy, Brass, Iron, Etc.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
- Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc
- 30 Degree helix angle
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #10
Melin Tool CC Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.3750" Overall Length, 0.5313" Cutting Diameter, 0.5" Shank Diameter
Asin: B0083K9PY6 | Model: 11184 | PartNumber: 11184 | Ean: 0733438111849 | UPC: 733438111849
Weldon Shanks Feature A Round Shank With One Of More Flats Machined Into The Side For Easy Indexing And Alignment.
30 Degree Helix Angle.
Used For General Purpose Milling In Most Materials Of Medium And Tough Alloy Materials Such As Stainless Steel, Nickel Base Alloy, Brass, Iron, Etc.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
- Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc
- 30 Degree helix angle
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #11
Melin Tool AMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 1.5" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
Asin: B0020663AS | Model: 11663 | PartNumber: 11663 | Ean: 0733438116639 | UPC: 733438116639
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Available In 60 Degree Points.
Can Be Used For Drilling, Slotting, Chamfering, And Profile Milling.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can be used for drilling, slotting, chamfering, and profile milling
- Available in 60 degree points
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #12
Melin Tool - 57832 EMG-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 3 Flutes, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.25" Shank Diameter
Asin: B0083LSLWW | Model: 57832 | PartNumber: 57832 | Ean: 0733438578321 | UPC: 733438578321
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Used For General Purpose Milling In Most Materials Of Medium Hardness Such As Steel, Brass, Iron, And Nonferrous Materials.
3 Flute Design Will Usually Allow Feed Rates 50 Percent Faster Than 2 Flute Tools.
Aluminum Titanium Nitride Is Similar To Tialn But With A Higher Aluminum Content For Improved Hardness And Smoothness.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
- Round shanks allow use with a wide variety of toolholding systems
- 3 flute design will usually allow feed rates 50 percent faster than 2 flute tools
- Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and nonferrous materials
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #13
Melin Tool 17860 CCMG-L Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 1.5000" Overall Length, 0.0625" Cutting Diameter, 0.125" Shank Diameter
Asin: B0083KTV6I | Model: 17860 | PartNumber: 17860 | Ean: 0733438178606 | UPC: 733438178606
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
30 Degree Helix Angle.
Used For General Purpose Milling In Most Materials Of Medium Hardness Such As Steel, Brass, Iron, And Non-Ferrous Materials.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and non-ferrous materials
- 30 Degree helix angle
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #14
Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 1.5" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
Asin: B0081AJ93A | Model: 56083 | PartNumber: 56083 | Ean: 0733438560838 | UPC: 733438560838
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Available In 90 Degree Points.
Can Be Used For Drilling, Slotting, Chamfering, And Profile Milling.
Aluminum Titanium Nitride Is Similar To Tialn But With A Higher Aluminum Content For Improved Hardness And Smoothness.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
- Round shanks allow use with a wide variety of toolholding systems
- Can be used for drilling, slotting, chamfering, and profile milling
- Available in 90 degree points
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #15
Melin Tool - 11637 CCMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 4 Flutes, 2.5" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B001VXRPNU | Model: 11637 | PartNumber: 11637 | Ean: 0733438116370 | UPC: 733438116370
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Available In 90 Degree Points.
Can Be Used For Drilling, Slotting, Chamfering, And Profile Milling.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can be used for drilling, slotting, chamfering, and profile milling
- Available in 90 degree points
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #16
Melin Tool BRMG Carbide Micro Corner Rounding End Mill, Double End, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 2 Flutes, 1.5000" Overall Length, 0.063" Cutting Diameter, 0.125" Shank Diameter
Asin: B0006Q44H8 | Model: 16297 | PartNumber: 16297 | Ean: 0733438162971 | UPC: 733438162971
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Radius Is Form Relieved.
Can Provide Uniform Finish On Corners.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can provide uniform finish on corners
- Radius is form relieved
- See more on Amazon...
First Available: 05/15/2017
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #17
Melin Tool AMG-M-M-DP Carbide Micro Drill Mill, Metric, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 38mm Overall Length, 0.5mm Cutting Diameter, 3mm Shank Diameter
Asin: B0083JOT1G | Model: 13364 | PartNumber: 13364 | Ean: 0733438133643 | UPC: 733438133643
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Drill Point End.
Can Be Used For Drilling, Slotting, Chamfering, And Profile Milling.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can be used for drilling, slotting, chamfering, and profile milling
- Drill point end
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #18
Melin Tool AMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 2.5" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B00206BO7K | Model: 11665 | PartNumber: 11665 | Ean: 0733438116653 | UPC: 733438116653
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Available In 60 Degree Points.
Can Be Used For Drilling, Slotting, Chamfering, And Profile Milling.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can be used for drilling, slotting, chamfering, and profile milling
- Available in 60 degree points
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #19
Melin Tool BRMG Carbide Corner Rounding End Mill, Double End, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 2 Flutes, 2.5000" Overall Length, 0.095" Cutting Diameter, 0.3125" Shank Diameter
Asin: B0006Q44O6 | Model: 16308 | PartNumber: 16308 | Ean: 0733438163084 | UPC: 733438163084
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Radius Is Form Relieved.
Can Provide Uniform Finish On Corners.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can provide uniform finish on corners
- Radius is form relieved
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #20
Melin Tool EMG-L Carbide Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 3" Overall Length, 0.3125" Cutting Diameter, 0.3125" Shank Diameter
Asin: B0083LTCQG | Model: 17806 | PartNumber: 17806 | Ean: 0733438178064 | UPC: 733438178064
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Used For General Purpose Milling In Most Materials Of Medium Hardness Such As Steel, Brass, Iron, And Non-Ferrous Materials.
3 Flute Design Will Usually Allow Feed Rates 50 Percent Faster Than 2 Flute Tools.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- 3 flute design will usually allow feed rates 50 percent faster than 2 flute tools
- Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and non-ferrous materials
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
Amazon Price: $25.17 | as of 05/21/2024
(11:00pm pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #21
Melin Tool CCMGN Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4" Overall Length, 0.2500" Cutting Diameter, 0.25" Shank Diameter
Asin: B0083KZEI2 | Model: 16734 | PartNumber: 16734 | Ean: 0733438167341 | UPC: 733438167341
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Used To Mill Deep Pockets Or Slots Where Long Flute Lengths Are Not Needed. The Solid Neck Area Provides Reach With Maximum Rigidity.
Neck Diameter Reduced For Clearance.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Neck diameter reduced for clearance
- Used to mill deep pockets or slots where long flute lengths are not needed. The solid neck area provides reach with maximum rigidity
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #22
Melin Tool CCMG-M-M-L Carbide Square Nose End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 57mm Overall Length, 3mm Cutting Diameter, 3mm Shank Diameter
Asin: B0083KYLVI | Model: 13637 | PartNumber: 13637 | Ean: 0733438136378 | UPC: 733438136378
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
30 Degree Helix Angle.
For Applications In Steel And Non-Ferrous Materials.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- For applications in steel and non-ferrous materials
- 30 Degree helix angle
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #23
Melin Tool CCMG-E Carbide Square Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 3" Overall Length, 0.1250" Cutting Diameter, 0.125" Shank Diameter
Asin: B0083KS5R4 | Model: 56072 | PartNumber: 56072 | Ean: 0733438560722 | UPC: 733438560722
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
30 Degree Helix Angle.
Used For General Purpose Milling In Most Materials Of Medium Hardness Such As Steel, Brass, Iron, And Non-Ferrous Materials.
Aluminum Titanium Nitride Is Similar To Tialn But With A Higher Aluminum Content For Improved Hardness And Smoothness.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
- Round shanks allow use with a wide variety of toolholding systems
- Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and non-ferrous materials
- 30 Degree helix angle
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
Amazon Price: $20.36 | as of 05/21/2024
(11:00pm pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #24
Melin Tool CCMG45-M-M Carbide Square Nose End Mill, Metric, nACo Monolayer Finish, Finishing Cut, 45 Deg Helix, 6 Flutes, 38mm Overall Length, 3mm Cutting Diameter, 3mm Shank Diameter
Asin: B0083KORN0 | Model: 13445 | PartNumber: 13445 | Ean: 0733438134459 | UPC: 733438134459
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Increased Core Diameter For Added Strength.
For Material Over 50Rc.
Naco Coated For Increased Tool Life.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- nACo coated for increased tool life
- Round shanks allow use with a wide variety of toolholding systems
- For material over 50Rc
- Increased core diameter for added strength
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #25
Melin Tool C Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 6 Flutes, 4.5000" Overall Length, 1.3125" Cutting Diameter, 1" Shank Diameter
Asin: B0083K6OGI | Model: 11288 | PartNumber: 11288 | Ean: 0733438112884 | UPC: 733438112884
Weldon Shanks Feature A Round Shank With One Of More Flats Machined Into The Side For Easy Indexing And Alignment.
Not To Be Used For Plunge Cutting.
Can Be Used In Profiling, Keyways, And Pockets.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
- Can be used in profiling, keyways, and pockets
- Not to be used for plunge cutting
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #26
Melin Tool C Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 4 Flutes, 4.1250" Overall Length, 1" Cutting Diameter, 0.75" Shank Diameter
Asin: B0083K5SSS | Model: 11246 | PartNumber: 11246 | Ean: 0733438112464 | UPC: 733438112464
Weldon Shanks Feature A Round Shank With One Of More Flats Machined Into The Side For Easy Indexing And Alignment.
Not To Be Used For Plunge Cutting.
Can Be Used In Profiling, Keyways, And Pockets.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
- Can be used in profiling, keyways, and pockets
- Not to be used for plunge cutting
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
Weight: 0.60 Pounds
See On Amazon #27
Melin Tool BRMG-S Carbide Micro Corner Rounding End Mill, Double End, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 2 Flutes, 2" Overall Length, 0.047" Cutting Diameter, 0.25" Shank Diameter
Asin: B0083K3O16 | Model: 11186 | PartNumber: 11186 | Ean: 0733438111863 | UPC: 733438111863
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Radius Is Form Relieved.
Can Provide Uniform Finish On Corners.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can provide uniform finish on corners
- Radius is form relieved
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #28
Melin Tool ARMG Carbide Micro Square Nose End Mill, Uncoated (Bright) Finish, 25 Deg Helix, 1 Flutes, 1.5000" Overall Length, 0.0625" Cutting Diameter, 0.125" Shank Diameter
Asin: B0083K2XG8 | Model: 12855 | PartNumber: 12855 | Ean: 0733438128557 | UPC: 733438128557
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Polished Single Flute Design.
Unique Rake And Clearance Angles For Fast Removal Rates.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Unique rake and clearance angles for fast removal rates
- Polished single flute design
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #29
Melin Tool AMGS-M-M-B Carbide Ball Nose End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 51mm Overall Length, 8mm Cutting Diameter, 8mm Shank Diameter
Asin: B0083K1QMU | Model: 13741 | PartNumber: 13741 | Ean: 0733438137412 | UPC: 733438137412
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
For Applications In Steel And Non-Ferrous Materials.
Ball Nose End.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Ball nose end
- For applications in steel and non-ferrous materials
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
Amazon Price: $24.21 | as of 05/21/2024
(11:00pm pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #30
Melin Tool AMG-EB Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 2 Flutes, 4" Overall Length, 0.2500" Cutting Diameter, 0.25" Shank Diameter
Asin: B0083JGQ30 | Model: 56178 | PartNumber: 56178 | Ean: 0733438561781 | UPC: 733438561781
Aluminum Titanium Nitride (Altin) Coating Lubricates The End Mill For High-Temperature Stability And Abrasion Resistance At High Cutting Speeds, Offering Better Heat Resistance Than Tin, Tialn, And Ticn Coatings.
Ball Nose End Mills (Also Called Ball End) Create Contoured Surfaces.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for general-purpose machining on most medium-hardness materials, including steel, brass, iron, and nonferrous materials
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Aluminum titanium nitride (AlTiN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN, TiAlN, and TiCN coatings
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Ball nose end mills (also called ball end) create contoured surfaces
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
Amazon Price: $40.42 | as of 05/21/2024
(11:00pm pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon