Competition Engineering C2616 Shock,Front,Drag Race
Asin: B003KXJ3YI | Model: C2616 | PartNumber: C2616 | Ean: 0084663026164 | UPC: 084663026164
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Principle Behind Our Shock Absorber Design Is To Allow The Front End Of The Race Car To Rise Rapidly Upon Initial Launch, Creating Greater Weight Transfer And Better Traction To The Rear Tires. As The Car Travels Down The Track, The Front End Will Gradually Descend To Its Ride Height Without Unloading The Rear Tires Which Is A Major Cause Of Wheel Spin. Our Rear Shocks Work In Conjunction With Our Front Shocks Making The Transition From Initial Launch To Top End Charge As Smooth As Possible..
Our Rear Drag Shocks Are Also Adjustable In Three Ratios: 70/30, 60/40 And 50/50. These Ratios Also Represent The Percentage Of Force Required To Compress And Extend The Shock Unit. Only This Time, The First Number Is Compression And The Second Extension. These Shocks Also Adjust By Compressing Them Fully And Rotating To The Desired Setting On The Body..
Competition Engineering’S Front Drag Shocks Are Adjustable In Three Ratios: 90/10, 80/20 And 60/40. These Ratios Reflect The Percentage Of Force Required To Extend And Compress The Shock Absorber. You Can Quickly Change The Valve Setting By Simply Compressing The Shock Fully And Rotating The Shaft Until The Indexing Notch Mates With The Desired Setting On The Body. It’S As Simple As Twist And Click..
Competition Engineering’S 3-Way Adjustable Drag Shocks Are Designed To Allow The Racer To Dial-In The Race Car To Meet Changing Track Conditions. Shock Valving Plays A Very Important Role In The Way Your Car Will Perform Both During Initial Launch And Throughout The Quarter Mile..
Features
- Fits; Chevrolet Full Size Truck, 1988-00
- Competition Engineering s 3-Way Adjustable Drag Shocks are designed to allow the racer to dial-in the race car to meet changing track conditions. Shock valving plays a very important role in the way your car will perform both during initial launch and throughout the quarter mile.
- The principle behind our shock absorber design is to allow the front end of the race car to rise rapidly upon initial launch, creating greater weight transfer and better traction to the rear tires. As the car travels down the track, the front end will gradually descend to its ride height without unloading the rear tires which is a major cause of wheel spin. Our rear shocks work in conjunction with our front shocks making the transition from initial launch to top end charge as smooth as possible.
- Competition Engineering s Front Drag Shocks are adjustable in three ratios: 90/10, 80/20 and 60/40. These ratios reflect the percentage of force required to extend and compress the shock absorber. You can quickly change the valve setting by simply compressing the shock fully and rotating the shaft until the indexing notch mates with the desired setting on the body. It s as simple as twist and click.
- Our Rear Drag Shocks are also adjustable in three ratios: 70/30, 60/40 and 50/50. These ratios also represent the percentage of force required to compress and extend the shock unit. Only this time, the first number is compression and the second extension. These shocks also adjust by compressing them fully and rotating to the desired setting on the body.
- See more on Amazon...
Brand: Competition Engineering | Manufacturer: Competition Engineering
Dimensions: 2.30 x 3.70 x 16.90 inches | Weight: 0.00 Pounds
Warranty: 90 day manufacturer
See On Amazon Similar To Competition Engineering C2616 ShockFrontDrag Race
#1
Race Tech 201-552471 Shock Spring 7.1Kg
Asin: B071RXJYZ4 | Model: 201-552471 | PartNumber: 201-552471
Extremely Accurate Rates.
Heat-Treated And Shot-Peened.
The Tightest Tolerances In The Industry.
Rt Springs Have The Highest Stiffness-To-Mass Ratio In The Industry; Making Them Extremely Light Weight For Their Particular Rate..
Features
- Through years of testing and manufacturing experience, Race Tech has developed a full line of Hi-Performance Springs using the finest materials and processes.
- RT Springs have the highest stiffness-to-mass ratio in the industry; making them extremely light weight for their particular rate.
- Extremely accurate rates
- The tightest tolerances in the industry
- Heat-treated and Shot-peened
- See more on Amazon...
Brand: Racetech | Manufacturer: Race Tech
Dimensions: 4.45 x 12.80 x 4.55 inches | Weight: 3.65 pounds
See On Amazon #2
Competition Engineering C2615 Shock,Front,Drag Race
Asin: B003KXHPDE | Model: C2615 | PartNumber: C2615 | Ean: 0084663026157 | UPC: 084663026157
The Principle Behind Our Shock Absorber Design Is To Allow The Front End Of The Race Car To Rise Rapidly Upon Initial Launch, Creating Greater Weight Transfer And Better Traction To The Rear Tires. As The Car Travels Down The Track, The Front End Will Gradually Descend To Its Ride Height Without Unloading The Rear Tires Which Is A Major Cause Of Wheel Spin. Our Rear Shocks Work In Conjunction With Our Front Shocks Making The Transition From Initial Launch To Top End Charge As Smooth As Possible..
Our Rear Drag Shocks Are Also Adjustable In Three Ratios: 70/30, 60/40 And 50/50. These Ratios Also Represent The Percentage Of Force Required To Compress And Extend The Shock Unit. Only This Time, The First Number Is Compression And The Second Extension. These Shocks Also Adjust By Compressing Them Fully And Rotating To The Desired Setting On The Body..
Competition Engineering’S Front Drag Shocks Are Adjustable In Three Ratios: 90/10, 80/20 And 60/40. These Ratios Reflect The Percentage Of Force Required To Extend And Compress The Shock Absorber. You Can Quickly Change The Valve Setting By Simply Compressing The Shock Fully And Rotating The Shaft Until The Indexing Notch Mates With The Desired Setting On The Body. It’S As Simple As Twist And Click..
Competition Engineering’S 3-Way Adjustable Drag Shocks Are Designed To Allow The Racer To Dial-In The Race Car To Meet Changing Track Conditions. Shock Valving Plays A Very Important Role In The Way Your Car Will Perform Both During Initial Launch And Throughout The Quarter Mile..
Features
- Fits; Chevrolet Full Size Truck, 1973-'87
- Competition Engineering s 3-Way Adjustable Drag Shocks are designed to allow the racer to dial-in the race car to meet changing track conditions. Shock valving plays a very important role in the way your car will perform both during initial launch and throughout the quarter mile.
- The principle behind our shock absorber design is to allow the front end of the race car to rise rapidly upon initial launch, creating greater weight transfer and better traction to the rear tires. As the car travels down the track, the front end will gradually descend to its ride height without unloading the rear tires which is a major cause of wheel spin. Our rear shocks work in conjunction with our front shocks making the transition from initial launch to top end charge as smooth as possible.
- Competition Engineering s Front Drag Shocks are adjustable in three ratios: 90/10, 80/20 and 60/40. These ratios reflect the percentage of force required to extend and compress the shock absorber. You can quickly change the valve setting by simply compressing the shock fully and rotating the shaft until the indexing notch mates with the desired setting on the body. It s as simple as twist and click.
- Our Rear Drag Shocks are also adjustable in three ratios: 70/30, 60/40 and 50/50. These ratios also represent the percentage of force required to compress and extend the shock unit. Only this time, the first number is compression and the second extension. These shocks also adjust by compressing them fully and rotating to the desired setting on the body.
- See more on Amazon...
Brand: Competition Engineering | Manufacturer: Competition Engineering
Dimensions: 2.30 x 16.90 x 3.70 inches | Weight: 0.00 Pounds
Warranty: 90 day manufacturer
See On Amazon #3
Competition Engineering C2600 Adjustable Drag Shock
Asin: B003KXJ640 | Model: C2600 | PartNumber: C2600 | Ean: 0084663026003 | UPC: 084663026003
Package Weight: 3.0 Pounds.
Country Of Origin : United States.
Designed To Allow The Racer To Dial-In The Race Car To Meet Changing Track Conditions.
Features
- Package Dimensions: 3.0 H x 17.0 L x 4.0 W (inches)
- Designed to allow the racer to dial-in the race car to meet changing track conditions
- Package Weight: 3.0 pounds
- Country of Origin : United States
- See more on Amazon...
First Available: 11/22/2012
Brand: Competition Engineering | Manufacturer: Competition Engineering
Dimensions: 2.50 x 17.00 x 3.50 inches | Weight: 2.57 Pounds
See On Amazon #4
COMP.ENG/MOR Competition Engineering C2720 Shock Absorber
Asin: B000CIOJ5C | Model: C2720 | PartNumber: C2720 | Ean: 0084663027208 | UPC: 084663027208
The Principle Behind Our Shock Absorber Design Is To Allow The Front End Of The Race Car To Rise Rapidly Upon Initial Launch, Creating Greater Weight Transfer And Better Traction To The Rear Tires. As The Car Travels Down The Track, The Front End Will Gradually Descend To Its Ride Height Without Unloading The Rear Tires Which Is A Major Cause Of Wheel Spin. Our Rear Shocks Work In Conjunction With Our Front Shocks Making The Transition From Initial Launch To Top End Charge As Smooth As Possible..
Our Rear Drag Shocks Are Also Adjustable In Three Ratios: 70/30, 60/40 And 50/50. These Ratios Also Represent The Percentage Of Force Required To Compress And Extend The Shock Unit. Only This Time, The First Number Is Compression And The Second Extension. These Shocks Also Adjust By Compressing Them Fully And Rotating To The Desired Setting On The Body..
Competition Engineering’S Front Drag Shocks Are Adjustable In Three Ratios: 90/10, 80/20 And 60/40. These Ratios Reflect The Percentage Of Force Required To Extend And Compress The Shock Absorber. You Can Quickly Change The Valve Setting By Simply Compressing The Shock Fully And Rotating The Shaft Until The Indexing Notch Mates With The Desired Setting On The Body. It’S As Simple As Twist And Click..
Competition Engineering’S 3-Way Adjustable Drag Shocks Are Designed To Allow The Racer To Dial-In The Race Car To Meet Changing Track Conditions. Shock Valving Plays A Very Important Role In The Way Your Car Will Perform Both During Initial Launch And Throughout The Quarter Mile..
Features
- Fits; Buick Apollo 1968- 79, Buick Century 1973- 81, Buick Grand National 1978- 88, Buick Riviera 1971- 78, Buick Skylark 1964- 72, Buick Special 1964- 72, Chevrolet Chevelle 1964- 83, Chevrolet El Camino 1964- 87, Chevrolet Fullsize 1965- 86, Chevrolet Malibu 1964- 83, Chevrolet Monte Carlo 1970- 88, Chevrolet Nova 1968- 73 (with Multi-Leaf H-D Suspension), Chevy S-10 Blazer 2WD 1983- 04, Chevy S-10 Truck 2WD 1982- 04, Oldsmobile Cutlass 1964- 72 (with out H-D Suspension), Oldsmobile Cutlass 1978- 88, Oldsmobile Fullsize 1965- 90, Oldsmobile Omega 1973- 79, Oldsmobile Toronado 1971- 78, Pontiac Fullsize 1963- 86, Pontiac Grand Prix, 1969- 87, Pontiac GTO 1967- 73, Pontiac LeMans 1968- 81, Pontiac Tempest 1968- 72, Pontiac Ventura 1971- 77 (with Multi-Leaf H-D Suspension), Toyota Corona 1961- 64
- Competition Engineering s 3-Way Adjustable Drag Shocks are designed to allow the racer to dial-in the race car to meet changing track conditions. Shock valving plays a very important role in the way your car will perform both during initial launch and throughout the quarter mile.
- The principle behind our shock absorber design is to allow the front end of the race car to rise rapidly upon initial launch, creating greater weight transfer and better traction to the rear tires. As the car travels down the track, the front end will gradually descend to its ride height without unloading the rear tires which is a major cause of wheel spin. Our rear shocks work in conjunction with our front shocks making the transition from initial launch to top end charge as smooth as possible.
- Competition Engineering s Front Drag Shocks are adjustable in three ratios: 90/10, 80/20 and 60/40. These ratios reflect the percentage of force required to extend and compress the shock absorber. You can quickly change the valve setting by simply compressing the shock fully and rotating the shaft until the indexing notch mates with the desired setting on the body. It s as simple as twist and click.
- Our Rear Drag Shocks are also adjustable in three ratios: 70/30, 60/40 and 50/50. These ratios also represent the percentage of force required to compress and extend the shock unit. Only this time, the first number is compression and the second extension. These shocks also adjust by compressing them fully and rotating to the desired setting on the body.
- See more on Amazon...
Brand: Competition Engineering | Manufacturer: Competition Engineering
Dimensions: 16.50 x 2.13 x 3.50 inches | Weight: 3.81 Pounds
Warranty: 90 day manufacturer
See On Amazon #5
COMP.ENG/MOR Competition Engineering C2600 Front Drag Race Shock
Asin: B000CIQI6A | Model: C2600 | PartNumber: C2600 | Ean: 0084663026003 | UPC: 084663026003
The Principle Behind Our Shock Absorber Design Is To Allow The Front End Of The Race Car To Rise Rapidly Upon Initial Launch, Creating Greater Weight Transfer And Better Traction To The Rear Tires. As The Car Travels Down The Track, The Front End Will Gradually Descend To Its Ride Height Without Unloading The Rear Tires Which Is A Major Cause Of Wheel Spin. Our Rear Shocks Work In Conjunction With Our Front Shocks Making The Transition From Initial Launch To Top End Charge As Smooth As Possible..
Our Rear Drag Shocks Are Also Adjustable In Three Ratios: 70/30, 60/40 And 50/50. These Ratios Also Represent The Percentage Of Force Required To Compress And Extend The Shock Unit. Only This Time, The First Number Is Compression And The Second Extension. These Shocks Also Adjust By Compressing Them Fully And Rotating To The Desired Setting On The Body..
Competition Engineering’S Front Drag Shocks Are Adjustable In Three Ratios: 90/10, 80/20 And 60/40. These Ratios Reflect The Percentage Of Force Required To Extend And Compress The Shock Absorber. You Can Quickly Change The Valve Setting By Simply Compressing The Shock Fully And Rotating The Shaft Until The Indexing Notch Mates With The Desired Setting On The Body. It’S As Simple As Twist And Click..
Competition Engineering’S 3-Way Adjustable Drag Shocks Are Designed To Allow The Racer To Dial-In The Race Car To Meet Changing Track Conditions. Shock Valving Plays A Very Important Role In The Way Your Car Will Perform Both During Initial Launch And Throughout The Quarter Mile..
Features
- Fits: Various GM, Dodge and Toyota vehicles. Check sizing for exact measurements
- Competition Engineering s 3-Way Adjustable Drag Shocks are designed to allow the racer to dial-in the race car to meet changing track conditions. Shock valving plays a very important role in the way your car will perform both during initial launch and throughout the quarter mile.
- The principle behind our shock absorber design is to allow the front end of the race car to rise rapidly upon initial launch, creating greater weight transfer and better traction to the rear tires. As the car travels down the track, the front end will gradually descend to its ride height without unloading the rear tires which is a major cause of wheel spin. Our rear shocks work in conjunction with our front shocks making the transition from initial launch to top end charge as smooth as possible.
- Competition Engineering s Front Drag Shocks are adjustable in three ratios: 90/10, 80/20 and 60/40. These ratios reflect the percentage of force required to extend and compress the shock absorber. You can quickly change the valve setting by simply compressing the shock fully and rotating the shaft until the indexing notch mates with the desired setting on the body. It s as simple as twist and click.
- Our Rear Drag Shocks are also adjustable in three ratios: 70/30, 60/40 and 50/50. These ratios also represent the percentage of force required to compress and extend the shock unit. Only this time, the first number is compression and the second extension. These shocks also adjust by compressing them fully and rotating to the desired setting on the body.
- See more on Amazon...
Brand: Competition Engineering | Manufacturer: Competition Engineering
Dimensions: 16.50 x 2.13 x 3.50 inches | Weight: 2.57 Pounds
Warranty: 90 day manufacturer
See On Amazon #6
COMP.ENG/MOR Competition Engineering C2755 Rear Drag Race Shock
Asin: B000CISHGO | Model: C2755 | PartNumber: C2755 | Ean: 0084663027550 | UPC: 084663027550
The Principle Behind Our Shock Absorber Design Is To Allow The Front End Of The Race Car To Rise Rapidly Upon Initial Launch, Creating Greater Weight Transfer And Better Traction To The Rear Tires. As The Car Travels Down The Track, The Front End Will Gradually Descend To Its Ride Height Without Unloading The Rear Tires Which Is A Major Cause Of Wheel Spin. Our Rear Shocks Work In Conjunction With Our Front Shocks Making The Transition From Initial Launch To Top End Charge As Smooth As Possible..
Our Rear Drag Shocks Are Also Adjustable In Three Ratios: 70/30, 60/40 And 50/50. These Ratios Also Represent The Percentage Of Force Required To Compress And Extend The Shock Unit. Only This Time, The First Number Is Compression And The Second Extension. These Shocks Also Adjust By Compressing Them Fully And Rotating To The Desired Setting On The Body..
Fit Type: Universal Fit.
Competition Engineering’S Front Drag Shocks Are Adjustable In Three Ratios: 90/10, 80/20 And 60/40. These Ratios Reflect The Percentage Of Force Required To Extend And Compress The Shock Absorber. You Can Quickly Change The Valve Setting By Simply Compressing The Shock Fully And Rotating The Shaft Until The Indexing Notch Mates With The Desired Setting On The Body. It’S As Simple As Twist And Click..
Competition Engineering’S 3-Way Adjustable Drag Shocks Are Designed To Allow The Racer To Dial-In The Race Car To Meet Changing Track Conditions. Shock Valving Plays A Very Important Role In The Way Your Car Will Perform Both During Initial Launch And Throughout The Quarter Mile..
Features
- Replacement in Competition Engineering P/N C2051
- Competition Engineering s 3-Way Adjustable Drag Shocks are designed to allow the racer to dial-in the race car to meet changing track conditions. Shock valving plays a very important role in the way your car will perform both during initial launch and throughout the quarter mile.
- The principle behind our shock absorber design is to allow the front end of the race car to rise rapidly upon initial launch, creating greater weight transfer and better traction to the rear tires. As the car travels down the track, the front end will gradually descend to its ride height without unloading the rear tires which is a major cause of wheel spin. Our rear shocks work in conjunction with our front shocks making the transition from initial launch to top end charge as smooth as possible.
- Competition Engineering s Front Drag Shocks are adjustable in three ratios: 90/10, 80/20 and 60/40. These ratios reflect the percentage of force required to extend and compress the shock absorber. You can quickly change the valve setting by simply compressing the shock fully and rotating the shaft until the indexing notch mates with the desired setting on the body. It s as simple as twist and click.
- Our Rear Drag Shocks are also adjustable in three ratios: 70/30, 60/40 and 50/50. These ratios also represent the percentage of force required to compress and extend the shock unit. Only this time, the first number is compression and the second extension. These shocks also adjust by compressing them fully and rotating to the desired setting on the body.
- Fit type: Universal Fit
- See more on Amazon...
Brand: Competition Engineering | Manufacturer: Moroso
Dimensions: 16.50 x 2.13 x 3.50 Inches | Weight: 3.00 Pounds
Warranty: 90 day manufacturer
See On Amazon #7
COMP.ENG/MOR Competition Engineering C2610 SHOCK,FRONT,DRAG RACE
Asin: B000CIOIZS | Model: C2610 | PartNumber: C2610 | Ean: 0084663026102 | UPC: 084663026102
The Principle Behind Our Shock Absorber Design Is To Allow The Front End Of The Race Car To Rise Rapidly Upon Initial Launch, Creating Greater Weight Transfer And Better Traction To The Rear Tires. As The Car Travels Down The Track, The Front End Will Gradually Descend To Its Ride Height Without Unloading The Rear Tires Which Is A Major Cause Of Wheel Spin. Our Rear Shocks Work In Conjunction With Our Front Shocks Making The Transition From Initial Launch To Top End Charge As Smooth As Possible..
Our Rear Drag Shocks Are Also Adjustable In Three Ratios: 70/30, 60/40 And 50/50. These Ratios Also Represent The Percentage Of Force Required To Compress And Extend The Shock Unit. Only This Time, The First Number Is Compression And The Second Extension. These Shocks Also Adjust By Compressing Them Fully And Rotating To The Desired Setting On The Body..
Competition Engineering’S Front Drag Shocks Are Adjustable In Three Ratios: 90/10, 80/20 And 60/40. These Ratios Reflect The Percentage Of Force Required To Extend And Compress The Shock Absorber. You Can Quickly Change The Valve Setting By Simply Compressing The Shock Fully And Rotating The Shaft Until The Indexing Notch Mates With The Desired Setting On The Body. It’S As Simple As Twist And Click..
Competition Engineering’S 3-Way Adjustable Drag Shocks Are Designed To Allow The Racer To Dial-In The Race Car To Meet Changing Track Conditions. Shock Valving Plays A Very Important Role In The Way Your Car Will Perform Both During Initial Launch And Throughout The Quarter Mile..
Features
- Fits; Buick Fullsize 1971- 84, Buick GS 1964- 67, Buick Skylark 1964- 67, Buick Special 1964- 67, Chevrolet Bel Air 1955- 57, Chevrolet Camaro 1970- 81, Chevrolet Chevelle 1964- 67, Chevrolet Corvette 1963- 82, Chevrolet El Camino 1964- 67, Chevrolet Fullsize 1955- 57, Chevrolet 1965- 86, Chevrolet Malibu 1964- 67, Ford Elite 1974- 79, Ford Fairlane 1972- 79, Ford Fairlane 1957- 59, Ford Fullsize 1965- 86, Ford Ltd II 1977- 79, Ford Torino 1972- 76, Ford Ranchero 1972- 79, Ford Thunderbird 1967- 79, Mercury Cougar 1974- 79, Mercury Fullsize 1965- 86, Mercury Montego 1972- 76, Oldsmobile Fullsize 1971- 86, Pontiac Firebird 1970- 81, Pontiac Fullsize 1963- 86, Pontiac Grand Prix 1962- 68
- Competition Engineering s 3-Way Adjustable Drag Shocks are designed to allow the racer to dial-in the race car to meet changing track conditions. Shock valving plays a very important role in the way your car will perform both during initial launch and throughout the quarter mile.
- The principle behind our shock absorber design is to allow the front end of the race car to rise rapidly upon initial launch, creating greater weight transfer and better traction to the rear tires. As the car travels down the track, the front end will gradually descend to its ride height without unloading the rear tires which is a major cause of wheel spin. Our rear shocks work in conjunction with our front shocks making the transition from initial launch to top end charge as smooth as possible.
- Competition Engineering s Front Drag Shocks are adjustable in three ratios: 90/10, 80/20 and 60/40. These ratios reflect the percentage of force required to extend and compress the shock absorber. You can quickly change the valve setting by simply compressing the shock fully and rotating the shaft until the indexing notch mates with the desired setting on the body. It s as simple as twist and click.
- Our Rear Drag Shocks are also adjustable in three ratios: 70/30, 60/40 and 50/50. These ratios also represent the percentage of force required to compress and extend the shock unit. Only this time, the first number is compression and the second extension. These shocks also adjust by compressing them fully and rotating to the desired setting on the body.
- See more on Amazon...
Brand: Competition Engineering | Manufacturer: Competition Engineering
Dimensions: 16.50 x 2.13 x 3.50 inches | Weight: 2.70 pounds
Warranty: 90 day manufacturer
See On Amazon #8
Competition Engineering C2610 Front Drag Shock
Asin: B003KXFUZE | Model: C2610 | PartNumber: C2610 | Ean: 0084663026102 | UPC: 084663026102
3 Way Adjustable.
Steel - Gray Paint - Front - Each.
15.34 In Extended - 1.63 In Od.
Features
- Shock - Drag - Mono Tube - 9.62 in Compressed
- 15.34 in Extended - 1.63 in OD
- 3 Way Adjustable
- Steel - Gray Paint - Front - Each
- See more on Amazon...
Brand: Competition Engineering | Manufacturer: Competition Engineering
Dimensions: 2.20 x 16.80 x 3.70 inches | Weight: 2.68 pounds
See On Amazon #9
COMP.ENG/MOR Competition Engineering C2620 SHOCK,FRONT,DRAG RACE
Asin: B000CISH8M | Model: C2620 | PartNumber: C2620 | Ean: 0084663026201 | UPC: 084663026201
The Principle Behind Our Shock Absorber Design Is To Allow The Front End Of The Race Car To Rise Rapidly Upon Initial Launch, Creating Greater Weight Transfer And Better Traction To The Rear Tires. As The Car Travels Down The Track, The Front End Will Gradually Descend To Its Ride Height Without Unloading The Rear Tires Which Is A Major Cause Of Wheel Spin. Our Rear Shocks Work In Conjunction With Our Front Shocks Making The Transition From Initial Launch To Top End Charge As Smooth As Possible..
Our Rear Drag Shocks Are Also Adjustable In Three Ratios: 70/30, 60/40 And 50/50. These Ratios Also Represent The Percentage Of Force Required To Compress And Extend The Shock Unit. Only This Time, The First Number Is Compression And The Second Extension. These Shocks Also Adjust By Compressing Them Fully And Rotating To The Desired Setting On The Body..
Competition Engineering’S Front Drag Shocks Are Adjustable In Three Ratios: 90/10, 80/20 And 60/40. These Ratios Reflect The Percentage Of Force Required To Extend And Compress The Shock Absorber. You Can Quickly Change The Valve Setting By Simply Compressing The Shock Fully And Rotating The Shaft Until The Indexing Notch Mates With The Desired Setting On The Body. It’S As Simple As Twist And Click..
Competition Engineering’S 3-Way Adjustable Drag Shocks Are Designed To Allow The Racer To Dial-In The Race Car To Meet Changing Track Conditions. Shock Valving Plays A Very Important Role In The Way Your Car Will Perform Both During Initial Launch And Throughout The Quarter Mile..
Features
- Fits; Dodge Challenger 1970- 74, Dodge Charger/Coronet 1965- 78, Dodge Dart/Demon/Swinger 1964- 76, Dodge Lancer 1962- 78, Dodge Magnum XE 1977- 79, Dodge Monaco 1962- 78, Plymouth Barracuda 1964- 74, Plymouth Belvedere/Fury/Savoy 1962- 70, Plymouth Satellite 1965- 72, Plymouth Valiant/Duster/Sport Scamp 1964- 76, Plymouth GTX 1967- 70, Plymouth Road Runner 1968- 75
- Competition Engineering s 3-Way Adjustable Drag Shocks are designed to allow the racer to dial-in the race car to meet changing track conditions. Shock valving plays a very important role in the way your car will perform both during initial launch and throughout the quarter mile.
- The principle behind our shock absorber design is to allow the front end of the race car to rise rapidly upon initial launch, creating greater weight transfer and better traction to the rear tires. As the car travels down the track, the front end will gradually descend to its ride height without unloading the rear tires which is a major cause of wheel spin. Our rear shocks work in conjunction with our front shocks making the transition from initial launch to top end charge as smooth as possible.
- Competition Engineering s Front Drag Shocks are adjustable in three ratios: 90/10, 80/20 and 60/40. These ratios reflect the percentage of force required to extend and compress the shock absorber. You can quickly change the valve setting by simply compressing the shock fully and rotating the shaft until the indexing notch mates with the desired setting on the body. It s as simple as twist and click.
- Our Rear Drag Shocks are also adjustable in three ratios: 70/30, 60/40 and 50/50. These ratios also represent the percentage of force required to compress and extend the shock unit. Only this time, the first number is compression and the second extension. These shocks also adjust by compressing them fully and rotating to the desired setting on the body.
- See more on Amazon...
Brand: Competition Engineering | Manufacturer: Competition Engineering
Dimensions: 16.50 x 2.13 x 3.50 inches | Weight: 2.78 pounds
Warranty: 90 day manufacturer
See On Amazon #10
Competition Engineering C2700 Drag Shock
Asin: B003KXDQBY | Model: C2700 | PartNumber: C2700 | Ean: 0084663027000 | UPC: 084663027000
Product Type: O Rings.
Country Of Origin: China.
Package Quantity: 1.
Features
- Package dimensions: 5.588 cms L x 7.874 cms W x 42.672 cms H
- Package quantity: 1
- Product Type: O Rings
- Country of Origin: China
- See more on Amazon...
Brand: Competition Engineering | Manufacturer: Competition Engineering
Weight: 3.75 pounds
See On Amazon #11
Metal Upgraded Front Rear Shock Mount and Shock Absorber Set, Aluminum Alloy, Compatible with Hyper GO MJX H16BM H16GT H16DR H16 MJX 16207 16208 16209 16210 H16 V3 RC Car (Blue)
Asin: B0CJFXT36K | Model: mjx BZJ | PartNumber: mjx BZJ | Ean: 0763823859605 | UPC: 763823859605
High-Quality Aluminum Alloy Material: The Shock Absorbers And Shock Mounts Are Made Of High-Quality 6060T6 Aluminum Alloy Material, Which Ensures Durability And Longevity. The Metal Front And Rear Shock Mounts Provide Additional Stability To The Car Chassis, While The Shock Absorbers Absorb Any Impact Force To Maintain Control During High-Speed Driving..
Note: Shock Absorbers Should Be Refuelled By Yourself And Sent Out Without Oil..
Easy To Install: The Front And Rear Shock Kits Are Designed To Be Easy To Install And Can Be Quickly Mounted To A Specified Rc Car Using The Included Shock Mounts. The Screws Included With The Product Allow Customers To Complete The Installation Process With Ease..
Compatible With Multiple Rc Cars: The Shock Absorbers Are Compatible With Hyper Go Mjx H16bm, H16gt, H16dr, H16 Mjx 16207, 16208, 16209, And 16210 H16 Rc Cars, As Well As The H16 V3 Rc Car. The Set Of Shock Absorbers And Shock Mounts Are Designed To Enhance The Performance Of These Rc Cars..
Features
- Front and Rear Shock Absorbers Set: This RC Car shock absorber set includes 4 shocks and front and rear shock mounts for complete car suspension. The shock absorbers are designed to provide smooth and stable driving experience.
- Compatible with Multiple RC Cars: The shock absorbers are compatible with Hyper GO MJX H16BM, H16GT, H16DR, H16 MJX 16207, 16208, 16209, and 16210 H16 RC Cars, as well as the H16 V3 RC Car. The set of shock absorbers and shock mounts are designed to enhance the performance of these RC cars.
- High-Quality Aluminum Alloy Material: The shock absorbers and shock mounts are made of high-quality 6060T6 aluminum alloy material, which ensures durability and longevity. The metal front and rear shock mounts provide additional stability to the car chassis, while the shock absorbers absorb any impact force to maintain control during high-speed driving.
- EASY TO INSTALL: The front and rear shock kits are designed to be easy to install and can be quickly mounted to a specified RC car using the included shock mounts. The screws included with the product allow customers to complete the installation process with ease.
- Note: Shock absorbers should be refuelled by yourself and sent out without oil.
- See more on Amazon...
Brand: RWLZLB | Manufacturer: RWLZLB
See On Amazon #12
Race Tech Shock Spring - 6.0 kg/mm SRSP 652660
Asin: B001V9T2Y4 | Model: SRSP 652660 | PartNumber: SRSP 652660 | Ean: 0600901422408 | UPC: 600901422408
Brand: Racetech | Manufacturer: Racetech
Dimensions: 4.50 x 13.00 x 4.50 Inches | Weight: 4.00 pounds
Warranty: Manufacturer
See On Amazon #13
Competition Engineering C2720 Drag Shock
Asin: B003KXJ60O | Model: C2720 | PartNumber: C2720 | Ean: 0084663027208 | UPC: 084663027208
3 Way Adjustable.
Steel - Gray Paint - Rear - Each.
22.87 In Extended - 1.63 In Od.
Features
- Shock - Drag - Mono Tube - 13.65 in Compressed
- 22.87 in Extended - 1.63 in OD
- 3 Way Adjustable
- Steel - Gray Paint - Rear - Each
- See more on Amazon...
Brand: Competition Engineering | Manufacturer: Competition Engineering
Dimensions: 2.30 x 16.80 x 3.70 inches
See On Amazon #14
COMP.ENG/MOR Competition Engineering C2740 Rear Drag Race Shock
Asin: B000CISHFU | Model: C2740 | PartNumber: C2740 | Ean: 0084663027406 | UPC: 084663027406
The Principle Behind Our Shock Absorber Design Is To Allow The Front End Of The Race Car To Rise Rapidly Upon Initial Launch, Creating Greater Weight Transfer And Better Traction To The Rear Tires. As The Car Travels Down The Track, The Front End Will Gradually Descend To Its Ride Height Without Unloading The Rear Tires Which Is A Major Cause Of Wheel Spin. Our Rear Shocks Work In Conjunction With Our Front Shocks Making The Transition From Initial Launch To Top End Charge As Smooth As Possible..
Our Rear Drag Shocks Are Also Adjustable In Three Ratios: 70/30, 60/40 And 50/50. These Ratios Also Represent The Percentage Of Force Required To Compress And Extend The Shock Unit. Only This Time, The First Number Is Compression And The Second Extension. These Shocks Also Adjust By Compressing Them Fully And Rotating To The Desired Setting On The Body..
Competition Engineering’S Front Drag Shocks Are Adjustable In Three Ratios: 90/10, 80/20 And 60/40. These Ratios Reflect The Percentage Of Force Required To Extend And Compress The Shock Absorber. You Can Quickly Change The Valve Setting By Simply Compressing The Shock Fully And Rotating The Shaft Until The Indexing Notch Mates With The Desired Setting On The Body. It’S As Simple As Twist And Click..
Competition Engineering’S 3-Way Adjustable Drag Shocks Are Designed To Allow The Racer To Dial-In The Race Car To Meet Changing Track Conditions. Shock Valving Plays A Very Important Role In The Way Your Car Will Perform Both During Initial Launch And Throughout The Quarter Mile..
Features
- Fits; Ford Fairlane 1965- 71, Ford Torino 1965- 71, Ford Fairlane 1957- 59, Ford Mustang 1964- 73, Ford Ranchero 1960- 71, Mercury Comet 1960- 69, Mercury Cougar 1967- 73, Mercury Montego 1968- 71
- Competition Engineering s 3-Way Adjustable Drag Shocks are designed to allow the racer to dial-in the race car to meet changing track conditions. Shock valving plays a very important role in the way your car will perform both during initial launch and throughout the quarter mile.
- The principle behind our shock absorber design is to allow the front end of the race car to rise rapidly upon initial launch, creating greater weight transfer and better traction to the rear tires. As the car travels down the track, the front end will gradually descend to its ride height without unloading the rear tires which is a major cause of wheel spin. Our rear shocks work in conjunction with our front shocks making the transition from initial launch to top end charge as smooth as possible.
- Competition Engineering s Front Drag Shocks are adjustable in three ratios: 90/10, 80/20 and 60/40. These ratios reflect the percentage of force required to extend and compress the shock absorber. You can quickly change the valve setting by simply compressing the shock fully and rotating the shaft until the indexing notch mates with the desired setting on the body. It s as simple as twist and click.
- Our Rear Drag Shocks are also adjustable in three ratios: 70/30, 60/40 and 50/50. These ratios also represent the percentage of force required to compress and extend the shock unit. Only this time, the first number is compression and the second extension. These shocks also adjust by compressing them fully and rotating to the desired setting on the body.
- See more on Amazon...
Brand: Competition Engineering | Manufacturer: Moroso
Dimensions: 16.50 x 2.13 x 3.50 inches | Weight: 1.19 Pounds
Warranty: 90 day manufacturer
See On Amazon #15
Competition Engineering C2806 Drag Strut -Mustang
Asin: B000CIULO0 | Model: C2806 | PartNumber: C2806 | Ean: 0084663028069 | UPC: 084663028069
Micro-Polished 7⁄8" Dia. Hard-Chrome Shaft Reduces Friction For Faster Reaction.
One Each.
Bolt-In Replacement For Easy Installation.
Computer Designed Valving For Consistent Performance Under Severe Racing Conditions.
Features
- 90/10 Drag Struts. Fits: Ford Mustang 1979-04, Mercury Capri 1979-86, Ford Fairmont 1978-83, Granada 1981-82, Ford Thunderbird 1987-88, Mercury Cougar 1980-82
- Computer designed valving for consistent performance under severe racing conditions
- Micro-polished 7 8 dia. hard-chrome shaft reduces friction for faster reaction
- Bolt-In replacement for easy installation
- One Each
- See more on Amazon...
Brand: Competition Engineering | Manufacturer: Competition Engineering
Dimensions: 24.00 x 4.00 x 4.00 inches | Weight: 10.70 pounds
Warranty: 90 day manufacturer
See On Amazon #16
Race Tech 201-552456 Shock Spring 5.6Kg
Asin: B071DZ8WZM | Model: 201-552456 | PartNumber: 201-552456
Extremely Accurate Rates.
Heat-Treated And Shot-Peened.
The Tightest Tolerances In The Industry.
Rt Springs Have The Highest Stiffness-To-Mass Ratio In The Industry; Making Them Extremely Light Weight For Their Particular Rate..
Features
- Through years of testing and manufacturing experience, Race Tech has developed a full line of Hi-Performance Springs using the finest materials and processes.
- RT Springs have the highest stiffness-to-mass ratio in the industry; making them extremely light weight for their particular rate.
- Extremely accurate rates
- The tightest tolerances in the industry
- Heat-treated and Shot-peened
- See more on Amazon...
Brand: Racetech | Manufacturer: Race Tech
Dimensions: 4.30 x 12.90 x 4.40 inches | Weight: 3.45 Pounds
See On Amazon #17
Competition Engineering C2730 Drag Shock
Asin: B003KXFXI8 | Model: C2730 | PartNumber: C2730
Package Quantity: 1.
Package Weight: 3.0 Pounds.
Product Type: Auto Accessory.
Features
- Package dimensions: 15.56 " L x 5.69 " W x 4.38 " H
- Product type: Auto Accessory
- package quantity: 1
- Package weight: 3.0 pounds
- See more on Amazon...
Brand: Competition Engineering | Manufacturer: Competition Engineering
Dimensions: 2.10 x 17.00 x 3.50 inches | Weight: 0.00 pounds
See On Amazon #18
Competition Engineering C2710 Drag Shock
Asin: B003KXAH8O | Model: C2710 | PartNumber: C2710
The Package Height Of The Product Is 4.38 Inches.
Item Package Weight : 3 Pounds.
The Package Width Of The Product Is 5.69 Inches.
Features
- The Package Length of the Product is 15.56 inches
- The Package Width of the Product is 5.69 inches
- The Package Height of the Product is 4.38 inches
- Item Package Weight : 3 pounds
- See more on Amazon...
Brand: Competition Engineering | Manufacturer: Competition Engineering
Weight: 3.46 pounds
See On Amazon #19
Race Tech Race Shock Spring - 4.8 kg/mm SRSP 652648
Asin: B0031BQ1Z8 | Model: TRTC51 | PartNumber: TRTC51
Extremely Accurate Rates.
Heat-Treated And Shot-Peened.
The Tightest Tolerances In The Industry.
Rt Springs Have The Highest Stiffness-To-Mass Ratio In The Industry; Making Them Extremely Light Weight For Their Particular Rate..
Features
- Through years of testing and manufacturing experience, Race Tech has developed a full line of Hi-Performance Springs using the finest materials and processes.
- RT Springs have the highest stiffness-to-mass ratio in the industry; making them extremely light weight for their particular rate.
- Extremely accurate rates
- The tightest tolerances in the industry
- Heat-treated and Shot-peened
- See more on Amazon...
Brand: Race Tech | Manufacturer: Race Tech
Dimensions: 4.40 x 12.90 x 4.40 Inches | Weight: 3.82 Pounds
See On Amazon #20
Competition Engineering C2710 Rear Drag Race Shock
Asin: B000CIOJ3Y | Model: C2710 | PartNumber: C2710 | Ean: 0084663027109 | UPC: 084663027109
The Principle Behind Our Shock Absorber Design Is To Allow The Front End Of The Race Car To Rise Rapidly Upon Initial Launch, Creating Greater Weight Transfer And Better Traction To The Rear Tires. As The Car Travels Down The Track, The Front End Will Gradually Descend To Its Ride Height Without Unloading The Rear Tires Which Is A Major Cause Of Wheel Spin. Our Rear Shocks Work In Conjunction With Our Front Shocks Making The Transition From Initial Launch To Top End Charge As Smooth As Possible..
Our Rear Drag Shocks Are Also Adjustable In Three Ratios: 70/30, 60/40 And 50/50. These Ratios Also Represent The Percentage Of Force Required To Compress And Extend The Shock Unit. Only This Time, The First Number Is Compression And The Second Extension. These Shocks Also Adjust By Compressing Them Fully And Rotating To The Desired Setting On The Body..
Competition Engineering’S Front Drag Shocks Are Adjustable In Three Ratios: 90/10, 80/20 And 60/40. These Ratios Reflect The Percentage Of Force Required To Extend And Compress The Shock Absorber. You Can Quickly Change The Valve Setting By Simply Compressing The Shock Fully And Rotating The Shaft Until The Indexing Notch Mates With The Desired Setting On The Body. It’S As Simple As Twist And Click..
Competition Engineering’S 3-Way Adjustable Drag Shocks Are Designed To Allow The Racer To Dial-In The Race Car To Meet Changing Track Conditions. Shock Valving Plays A Very Important Role In The Way Your Car Will Perform Both During Initial Launch And Throughout The Quarter Mile..
Features
- Fits; Chevrolet Camaro 1970-81 and Pontiac Firebird 1970-81
- Competition Engineering s 3-Way Adjustable Drag Shocks are designed to allow the racer to dial-in the race car to meet changing track conditions. Shock valving plays a very important role in the way your car will perform both during initial launch and throughout the quarter mile.
- The principle behind our shock absorber design is to allow the front end of the race car to rise rapidly upon initial launch, creating greater weight transfer and better traction to the rear tires. As the car travels down the track, the front end will gradually descend to its ride height without unloading the rear tires which is a major cause of wheel spin. Our rear shocks work in conjunction with our front shocks making the transition from initial launch to top end charge as smooth as possible.
- Competition Engineering s Front Drag Shocks are adjustable in three ratios: 90/10, 80/20 and 60/40. These ratios reflect the percentage of force required to extend and compress the shock absorber. You can quickly change the valve setting by simply compressing the shock fully and rotating the shaft until the indexing notch mates with the desired setting on the body. It s as simple as twist and click.
- Our Rear Drag Shocks are also adjustable in three ratios: 70/30, 60/40 and 50/50. These ratios also represent the percentage of force required to compress and extend the shock unit. Only this time, the first number is compression and the second extension. These shocks also adjust by compressing them fully and rotating to the desired setting on the body.
- See more on Amazon...
Brand: Competition Engineering | Manufacturer: Moroso
Dimensions: 16.50 x 2.13 x 3.50 inches | Weight: 3.37 Pounds
Warranty: 90 day manufacturer
See On Amazon
Looking For Something Else?
Search