BIGTREETECH SKR Mini E3 V3.0 32Bit Control Board with TMC2209 UART Stepper Driver New Upgrade 3D Printer Silent Board for Ender 3, Ender3 Pro, Ender-3 V2 3D Printer
Asin: B08BZQ22XT | Model: ZZB000318-KINGPRINT | PartNumber: ZZB000318-KINGPRINT | Ean: 0778416923601 | UPC: 778416923601
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.đ„Increased Heat Sink: Redesign The Drive Heat Sink, Strengthen The Drive Heat Dissipation Capacity, And Greatly Improve The Heat Dissipation Performance;.
đ„Output Power Supply: Increase Spi Output Port +3.3V Power Supply, External Spi Sensor Power Supply Voltage +3.3V And +5V Are Optional, Support The Motherboard To Directly Supply Power To Peripherals..
đ„Usb Micro B: The Pc Communication Usb Interface Is Upgraded From Mini Usb To Micro Usb B, Which Is More Adaptable;.
đ„Three Cnc Fan: Increase The Heat Dissipation Controllable Fan To Reduce The Printer Temperature When The Device Is Working;.
Features
- Main Control Chip: Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6;
- Three CNC Fan: Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working;
- Increased Heat Sink: Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly improve the heat dissipation performance;
- USB Micro B: The PC communication USB interface is upgraded from Mini USB to Micro USB B, which is more adaptable;
- Output Power Supply: Increase SPI output port +3.3V power supply, external SPI sensor power supply voltage +3.3V and +5V are optional, support the motherboard to directly supply power to peripherals.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon Similar To BIGTREETECH SKR Mini E3 V3.0
#1
BIGTREETECH SKR Mini E3 V3.0 Control Board with TMC2209 UART Stepper Driver New Upgrade 32Bit 3D Printer Silent Board for Ender-3, Ender3 Pro, Ender-3 V2 3D Printer
Asin: B09LC34SCK | Model: KINGPRINTER-ZZB000590 | PartNumber: KINGPRINTER-ZZB000590 | Ean: 0778416923601 | UPC: 778416923601
ăHeating OutputăSupport Heating Hot End And Hot Bed Output. The Heating Indicator Light Will Light Up When The Heating Hot End Or Hot Bed Is Correctly Connected And Powered On. Please Connect The Wires In A Power-Off State, Otherwise It May Cause Static Breakdown Of The Mosfet And Damage To The Control Board..
ăOutput Power SupplyăIncrease Spi Output Port +3.3V Power Supply, External Spi Sensor Power Supply Voltage +3.3V And +5V Are Optional, Support The Motherboard To Directly Supply Power To Peripherals..
ăHeat Sink UpgradeăRedesign The Drive Heat Sink, Strengthen The Drive Heat Dissipation Capacity, And Greatly Improve The Heat Dissipation Performance; There Are 4 Tmc2209 Silent Drivers Onboard The Motherboard..
ăThree Cnc FanăIncrease The Heat Dissipation Controllable Fan To Reduce The Printer Temperature When The Device Is Working; The Fan Port Needs To Ensure That The Fan Voltage Specifications Are Consistent With The Motherboard Power Supply, Otherwise The Fan Will Have No Voltage..
Features
- Main Control Chip Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6; Add thermistor interface protection circuit to prevent damage to the main control chip.
- Three CNC Fan Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working; The fan port needs to ensure that the fan voltage specifications are consistent with the motherboard power supply, otherwise the fan will have no voltage.
- Heating Output Support heating hot end and hot bed output. The heating indicator light will light up when the heating hot end or hot bed is correctly connected and powered on. Please connect the wires in a power-off state, otherwise it may cause static breakdown of the MOSFET and damage to the control board.
- Heat Sink Upgrade Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly improve the heat dissipation performance; There are 4 tmc2209 silent drivers onboard the motherboard.
- Output Power Supply Increase SPI output port +3.3V power supply, external SPI sensor power supply voltage +3.3V and +5V are optional, support the motherboard to directly supply power to peripherals.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #2
BIGTREETECH Eddy V1.0 High Speed Auto Bed Leveling Sensor for Voron 2.4/Trident,VZbot,CoreXY,I3 Series Running Klipper 3D Printer Compatible with Octopus V1.1,Octopus Pro,SKR Mini E3 V3.0,Manta M8p
Asin: B0D14M62W3 | Model: BIGTREETECH Eddy V1.0 | PartNumber: BIGTREETECH Eddy V1.0
â
Perfect For Voron Stealthburner: Bigtreetech Eddy Auto Bed Leveling Sensor Easily Attached To Voron V2.4&Trident Tl-Q5mc2 (Pl-08N) Location For Quick And Convenient Integration, Suitable For Ender, Corexy, Voron, Vzbot, I3 Series 3D Printers..
â
Widely Compatible: Btt Eddy V1.0 Comes With Customized A 2.5M Usb Cable, Easier Wiring, Compatible With Btt Pi + Octopus Pro/Octopus V1.1/Octopus Max Ez/Kraken/Skr Mini E3 V3.0/Skr V1.4 Turbo/Skr 3/Ez, Skr Pico Or Cb1/Cb2 + Manta M8p/M5p/M4p, Manta E3 Ez Motherboards..
đAfter-Sales Service: Notes: The Spring Steel Sheet With A Magnetic Sticker Heatbed Solution Works Well With Eddy Series, Such As The Hot Bed Solution Of Pei Steel Plate+Soft Magnet. But It Is Essential To Avoid Interference From Standalone Magnets, Such As Round Magnet Hotbed (Prusa). Regardless Of The Any Problems You Encounter During The Installation And Use Of Eddy, Please Contact Us In Time And We Will Provide You With Detailed Solutions..
â
Temperature Compensation: Eddy V1.0 Features Temperature Compensation And Z-Axis Homing, Ensuring Consistent, Precise Leveling Regardless Of Temperature Fluctuations. Error-Proof Installation, Customized Shell Effectively Shields External Metal Interference While Leaving Space For The Coil. It Is Easy To Install And Does Not Require Measurement, Which Improves User Experience And Ensures Detection Accuracy..
â
20 Sec High Speed Leveling: Btt Eddy V1.0 High-Speed Leveling Sensor Adopts Rp2040 Main Control Chip. The 250*250Mm Heatbed Is Leveled Within 20 Sec. Weight Only 6G, Super Light&Small, Reduce The Impact Of Exercise. 0.0005Mm High Precision. Friendly For Large-Size Printers, High-Precision Leveling Can Be Easily Achieved..
Features
- Designed for Klipper: BIGTREETECH Eddy V1.0 high speed auto bed leveling sensor is designed for Klipper. Adopts inductive leveling technology, a high-frequency magnetic field is used to induce eddy currents in the conductor, and precise leveling is completed by measuring the intensity of the eddy currents.
- 20 sec High Speed Leveling: BTT Eddy V1.0 high-speed leveling sensor adopts RP2040 main control chip. The 250*250mm heatbed is leveled within 20 sec. Weight only 6g, super light&small, reduce the impact of exercise. 0.0005mm high precision. Friendly for large-size printers, high-precision leveling can be easily achieved.
- Perfect for Voron StealthBurner: BIGTREETECH Eddy auto bed leveling sensor easily attached to Voron V2.4&Trident TL-Q5MC2 (PL-08N) location for quick and convenient integration, suitable for Ender, CoreXY, Voron, Vzbot, I3 series 3D printers.
- Temperature Compensation: Eddy V1.0 features temperature compensation and Z-axis homing, ensuring consistent, precise leveling regardless of temperature fluctuations. Error-proof installation, customized shell effectively shields external metal interference while leaving space for the coil. It is easy to install and does not require measurement, which improves user experience and ensures detection accuracy.
- Widely Compatible: BTT Eddy V1.0 comes with customized a 2.5M USB cable, easier wiring, compatible with BTT Pi + Octopus Pro/Octopus V1.1/Octopus Max EZ/Kraken/SKR Mini E3 V3.0/SKR V1.4 Turbo/SKR 3/EZ, SKR Pico or CB1/CB2 + Manta M8P/M5P/M4P, Manta E3 EZ motherboards.
- After-sales Service: Notes: The spring steel sheet with a magnetic sticker heatbed solution works well with Eddy series, such as the hot bed solution of PEI steel plate+soft magnet. but it is essential to avoid interference from standalone magnets, such as round magnet hotbed (Prusa). Regardless of the any problems you encounter during the installation and use of Eddy, please contact us in time and we will provide you with detailed solutions.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
See On Amazon #3
BIGTREETECH Smart Filament Runout Sensor V2.0 BTT SFS Filament Detector to Detect Filament Break/Run Out/Jam/Tying for 1.75mm Filament Use with SKR Mini E3 V3.0, SKR 3, Manta E3EZ, Octopus Pro
Asin: B0C7PZDBNC
đăBilateral FeedingăBigtreetech Smart Filament Sensor V2.0 Allows Bi-Directional Feeding, Which Removes You From Hard Discrimination Of Filament Inlet And Outlet. Such Upgrading Enables More Flexible Installation And Can Maximize Space Utilization Of Your 3D Printer! Sfs V2.0 Weighs Only 36G, Greatly Reducing Inertia Added To The Direct-Drive Extruder For Higher Printing Speed And Accuracy..
đăWide CompatibilityăBigtreetech Filament Jam Sensor Can Be Mounted Both On Bowden Extruder And Direct Drive Extruders. It Supports Any Motherboard With Available I/O Ports(Endstop, Filament Detection, Bl Touch, Induction Sensor, Etc), Like Skr Mini E3 V3.0 / Skr3 / Skr 3 Ez / Skrat / Manta E3ez / Octopus Pro. And Sfs V2.0 Is Compatible With Klipper, Marlin And Reprap Firmwares..
đăWarm Customer ServiceăPlease Feel Free To Contact Us Directly Through Amazon If You Have Any Problem When Using Our Sfs V2.0, Bigtreetech Customer Service Team Will Try Our Best To Solve It..
đăEasy To InstallăOur Filament Run Out Sensor Is Designed With 3 Mounting Holes On The Back For Easy Installation Onto Your 3D Printer With Only A Bracket. The Bracket Stl File Can Be Downloaded In Btt Github Web: Bigtreetech/Smart-Filament-Detection-Module/Tree/Master. The Filament Feeding Lever Serves For Easy Flexible Filament Loading. Please Feel Free To Contact Us If You Have Any Doubts..
đăSensitive Photoelectric Filament DetectorăBtt Filament Detection Module Adopts Photoelectric Sensor Whose Theoretical Detection Length Can Reach Up To 2.88Mm, Much Shorter Than 7Mm Of Sfs V1.0. Such Improvement Enables Sfs V2.0 Longer Service Life And Higher Precision In Filament Abnormality Detection. Note: 2.88 Mm Is The Minimum Detection Length For The Sensor To Function Properly. If âFalse Triggersâ Error Occurs, Try To Increase The Detection Length By 1Mm Until The Problem Is Resolved..
Features
- Smart Filament Sensor BIGTREETECH SFS V2.0 can not only detect filament runout, but also filament breakage, filament clogging, filament tying and even extruder malfunction. Detecting above abnormal extrusion cases, BTT SFS V2.0 will send error alerts to screen and automatically stop printing to keep you away from filament and electricity waste.
- Sensitive Photoelectric Filament Detector BTT filament detection module adopts photoelectric sensor whose theoretical detection length can reach up to 2.88mm, much shorter than 7mm of SFS V1.0. Such improvement enables SFS V2.0 longer service life and higher precision in filament abnormality detection. Note: 2.88 mm is the minimum detection length for the sensor to function properly. If false triggers error occurs, try to increase the detection length by 1mm until the problem is resolved.
- Bilateral Feeding BIGTREETECH smart filament sensor V2.0 allows bi-directional feeding, which removes you from hard discrimination of filament inlet and outlet. Such upgrading enables more flexible installation and can maximize space utilization of your 3d printer! SFS V2.0 weighs only 36g, greatly reducing inertia added to the direct-drive extruder for higher printing speed and accuracy.
- Easy to Install Our filament run out sensor is designed with 3 mounting holes on the back for easy installation onto your 3d printer with only a bracket. The bracket stl file can be downloaded in BTT github web: bigtreetech/smart-filament-detection-module/tree/master. The filament feeding lever serves for easy flexible filament loading. Please feel free to contact us if you have any doubts.
- Wide Compatibility BIGTREETECH filament jam sensor can be mounted both on bowden extruder and direct drive extruders. It supports any motherboard with available I/O ports(Endstop, filament detection, BL touch, induction sensor, etc), like SKR MINI E3 V3.0 / SKR3 / SKR 3 EZ / SKrat / Manta E3EZ / Octopus Pro. And SFS V2.0 is compatible with Klipper, Marlin and RepRap firmwares.
- Warm Customer Service Please feel free to contact us directly through Amazon if you have any problem when using our SFS V2.0, BIGTREETECH customer service team will try our best to solve it.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
Weight: 0.08 pounds
See On Amazon #4
BIGTREETECH SKR Mini E3 V3.0 Motherboard, Ender-3/Ender-3 Pro/Ender-3 V2 Motherboard Upgrade, BTT 32 Bit Silent Control Board with TMC2209 UART Stepper Motor Driver
Asin: B07YW86YS7 | Model: SKR MINI E3 V3.0 | PartNumber: SKR MINI E3 V3.0
đ„ăDiy FriendlyăBtt Skr Mini E3 V3.0 Motherboard Supports Bltouch, Rgb Lights, Blocking Detection And Shutdown Function. It Also Supports Tft35 E3 V3.0.1/Tft35 V3.0.1/Tft28 V3.0 Touch Screen As Well As Original 12864 Lcd Screen..
đ„ăFirmware UpdateăSkr Mini E3 V3.0 Is Compatible Both With Marlin And Klipper Firmwares. Firstly Download Firmware On Github Website Of Skr Mini E3 V3.0 Motherboard, Copy And Save It To Sd Card (Note: Ensure Firmware Have Been Reserved ), Then Re-Plug The Sd Card And Wait For 10S. Note: Our Control Board Comes Without Sd Card..
đ„ăWarrantyăBiqu Offers A 12-Months Warranty For Our Skr Mini E3 V3 Motherboard. Please Feel Free To Contact Us If You Might Have Any Problem About Our Product, We Are Always Ready For Help..
đ„ăOnboard Tmc2209 DriversăBigtretech Skr Mini E3 V3.0 Mainboard Is Integrated With Ultra Silent Tmc2209 Stepper Motor Driver. Tmc2209 Driver Generates Lower Heat And Has A Larger-Area Cooling Position To Lower The Working Temperature. Meanwhile, Tmc2209 Adopts Stealthchop2 Mute Technology To Ensures Noiseless Operation, Maximum Efficiency And Best Motor Torque..
đ„ăLarger Heatsink And 3 Cnc FansăUpgraded Skr Mini E3 V3.0 Has A Larger Aluminum Heat Sink Area For Stepper Motor Driver, Increasing Its Heat Dissipation Performance By 20%. And Skr Mini E3 V3 Also Has 3 Heat Dissipation Controllable Fans To Reduce The Heat Of Your 3D Printers When It's Working..
Features
- Born for Ender-3 Main control chip of BTT SKR Mini E3 V3.0 mainboard is STMicroelectronics' latest G0 series: STM32G0B1RET6 or STM32G0B0RET6. This 3D printer control board is compatible with Ender-3, Ender-3 V2, Ender-3 Pro, Ender-5 and Ender-5 pro.
- Larger Heatsink and 3 CNC Fans Upgraded SKR MINI E3 V3.0 has a larger aluminum heat sink area for stepper motor driver, increasing its heat dissipation performance by 20%. And SKR MINI E3 V3 also has 3 heat dissipation controllable fans to reduce the heat of your 3D printers when it's working.
- DIY Friendly BTT SKR Mini E3 V3.0 motherboard supports BLTouch, RGB lights, blocking detection and shutdown function. It also supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28 V3.0 touch screen as well as original 12864 LCD screen.
- Onboard TMC2209 Drivers BIGTRETECH SKR MINI E3 V3.0 mainboard is integrated with ultra silent TMC2209 stepper motor driver. TMC2209 driver generates lower heat and has a larger-area cooling position to lower the working temperature. Meanwhile, TMC2209 adopts stealthChop2 Mute technology to ensures noiseless operation, maximum efficiency and best motor torque.
- Firmware Update SKR Mini E3 V3.0 is compatible both with Marlin and Klipper firmwares. Firstly download firmware on GitHub website of SKR MINI E3 V3.0 motherboard, copy and save it to SD card (Note: ensure firmware have been reserved ), then re-plug the SD card and wait for 10s. Note: Our control board comes without SD card.
- Warranty BIQU offers a 12-months warranty for our SKR MINI E3 V3 motherboard. Please feel free to contact us if you might have any problem about our product, we are always ready for help.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #5
BIGTREETECH Mini12864 V2.0 LCD Graphic Smart Display Control Board with Adapter and Cable for Ender-3 VORON 2.4 Prusa-i3 3D Printer RAMPS 1.4 RepRap 3D Printer Mendel Prusa Arduino
Asin: B08P5LXR86 | Model: KINGPRINT-ZZB000475 | PartNumber: KINGPRINT-ZZB000475 | Ean: 0791568743491 | UPC: 791568743491
3.Product Comes Encoder Parameter Adjustment Can Be Achieved, And The File Selection Print..
5.Do Not Worry About The Problem Of After-Sales, If There Is Any Need, Get In Touch With Us, We Will Help You Solve It..
4.Plug And Play On The Ramps, But Need To Modify The Firmware To Support..
2.With A Sd Card Base On Back, Put Slicing File Into The Sd Card And Select The File On The Lcd, Then Can Be Printing..
Features
- 1.The Mini12864 display panel has RGB multi-color backlight and can support 8 RGB, which is even more cool.
- 2.With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing.
- 3.Product comes encoder parameter adjustment can be achieved, and the file selection print.
- 4.Plug and play on the RAMPS, but need to modify the firmware to support.
- 5.Do not worry about the problem of after-sales, if there is any need, get in touch with us, we will help you solve it.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 1.18 x 2.36 x 1.18 inches | Weight: 0.11 pounds
See On Amazon #6
BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black
Asin: B09LH727MT | Model: ZZB000590 | PartNumber: ZZB000590 | Ean: 0778416923601 | UPC: 778416923601
âăHeat Sink Design UpgradeăBigtreetech Skr Mini E3 V3.0 Motherboard New Upgraded To Integrated Large Stepping Motor Driver Aluminum Heat Sink,Strengthen The Drive Heat Dissipation Capacity, And Greatly Improve The Motherboardc Heat Dissipation Performance..
âăFan UpgradedăBigtreetech Skr Mini E3 V3.0 Motherboard Increase Three Cnc Heat Dissipation Controllable Fan Interface To Reduce The Printer Temperature When The Device Is Working..
âă100% Satisfying Customer Services ăDue To Amazon's Return Policy, There May Be Some Problems With The Packaging Of The Products You Receive, We Are Sorry For This Situation, Please Don't Worry, Feel Free To Contact Us, We Will Solve This Problem For You Properly!.
âăMultiple FunctionsăBtt Skr Mini E3 V3.0 Silent Board Supports Bltouch,Microprobe, Rgb Lights,Filament Detection, Automatic Shutdown,Power-Off Reesume, Display Supports Tft35 E3 V3.0.1/Tft35 V3.0.1/Tft28/Tft43/Tft50/Tft70 V3.0 Touch Screen As Well As Original 12864 Lcd Of Ender 3 Printer.When Running Klipper Touch ModeïŒPlease Choose Btt Hdmi5 V1.1 Touchscreen.
âăMultiple CompatibileăBigtreetech Skr Mini E3 V3.0 Control Board Integrated Ultra Silent Tmc2209 Uart Stepper Driver,Designed For Ender 3,Plug And Playing,Compatible With Ender 5/Ender 5 Pro/Ender 3 V2 3D Printer, The Firmware Is Pre-Install Well Before We Ship Out, You Can Select The Firmware Base On Your Needs..
Features
- Main Control Chip BIGTREETECH SKR Mini E3 V3.0 32 bit control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin.
- Multiple Compatibile BIGTREETECH SKR MINI E3 V3.0 control board integrated ultra silent TMC2209 uart stepper driver,designed for Ender 3,Plug and Playing,Compatible with Ender 5/Ender 5 Pro/Ender 3 V2 3D Printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs.
- Heat Sink Design Upgrade BIGTREETECH SKR MINI E3 V3.0 motherboard new upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance.
- Multiple Functions BTT SKR MINI E3 V3.0 silent board Supports BLTouch,MicroProbe, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer.when running Klipper touch mode Please choose BTT HDMI5 V1.1 touchscreen
- Fan Upgraded BIGTREETECH SKR Mini E3 V3.0 motherboard Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working.
- 100% Satisfying Customer Services Due to Amazon's return policy, there may be some problems with the packaging of the products you receive, we are sorry for this situation, please don't worry, feel free to contact us, we will solve this problem for you properly!
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.39 x 4.08 x 2.76 inches
See On Amazon #7
BIGTREETECH BLTouch V3.1 Auto Bed Leveling Sensor Kit+Mount Bracket+1M Extension Cable for Ender 3,Ender 3 Pro/Ender 3S/Ender 5/Ender 5 Pro/CR10 3D Printer with SKR Mini E3 V3.0,Octopus/Manta Board
Asin: B087CQ3RLG | Model: 1 | PartNumber: 1 | Ean: 0779288068124 | UPC: 779288068124
đ
ăSimple To UseăThanks To Its Small And Simple Structure, Bl Touch Auto Leveling Kit Can Be Easily Applied. As Bltouch Works As Usual Auto Bed Leveling Sensor, Gathering Information & Setting Up Your Firmware Will Be An Easy Task. Can Be Used On Heating Beds Made Of Glass, Wood, Metal And Other Materials..
đ
ăWide CompatiblityăBl Touch Auto Bed Leveling Sensor With The Bracket Is Suitable For Ender 3/Ender 3 Pro/Ender 3S/Ender 5/Ender 5 Pro/Ender 5S/Cr10 3D Printer, Compatible With Skr Mini E3 V3.0/Octopus V1.1/Octopus Pro/Max Ez/Skr V1.4 Turbo/Skr 3/Ez/Manta M8p/M4p/M5p,Manta E3 Ez/Kraken/Skr Pico, V4.2.7, Mks Gen L...3D Printer Control Board..
đ
ăWhat You GetăThis Kit Consists Of Bltouch V3.1 Auto Leveling Sensor, Mount And 1 Meter Extension Cable, Which May Not Fit Ender 3 Pro Machine. If You Wanna Buy Extra Extension Cable, Please Check The Asin: B08g8b23l7(Copy And Paste On Search Bar)..
đ
ăLogic Voltage Freeă3.3V/5V The Desired Output Logic Voltage Is Stored In The Eeprom Of The Probe And Can Be Selected By Commands. The Z Trigger Pulse With Adaptable Width Beyond 10Ms Eliminates The Danger Of Firmware Missing The Trigger And The Nozzle Reaching The Bed..
đ
ăSmart To UseăBl Touch Auto Bed Leveling Kit Featured With Self-Test, The Push Pin Is Operated Three Times To Test When The Power Is On. Bltouch V3.1 Also Added Other Smart Functions, Like Alarm, Alarm Release, Test Mode For M119, Which Enables User Convenience And Enjoyable Printing..
Features
- High precision ANTCLABS BLTouch V3.1 auto bed leveling sensor s standard deviation in repeatability is around 0.005mm precise. The stroke is up to 1.6mm longer than V2.0.
- Smart to Use BL touch auto bed leveling kit featured with self-test, The push pin is operated three times to test when the power is on. Bltouch V3.1 also added other smart functions, like alarm, alarm release, test mode for M119, which enables user convenience and enjoyable printing.
- Simple to Use Thanks to its small and simple structure, bl touch auto leveling kit can be easily applied. As BLTouch works as usual auto bed leveling sensor, gathering information & setting up your firmware will be an easy task. can be used on heating beds made of glass, wood, metal and other materials.
- Logic Voltage Free 3.3V/5V the desired output logic voltage is stored in the EEPROM of the probe and can be selected by commands. The Z trigger pulse with adaptable width beyond 10ms eliminates the danger of firmware missing the trigger and the nozzle reaching the bed.
- Wide Compatiblity BL touch auto bed leveling sensor with the bracket is suitable for Ender 3/Ender 3 Pro/Ender 3S/Ender 5/Ender 5 Pro/Ender 5S/CR10 3D Printer, compatible with SKR MINI E3 V3.0/Octopus V1.1/Octopus Pro/Max EZ/SKR V1.4 Turbo/SKR 3/EZ/Manta M8p/M4p/M5P,Manta E3 EZ/Kraken/SKR Pico, V4.2.7, MKS Gen L...3d printer control board.
- What You Get This kit consists of BLTouch V3.1 auto leveling sensor, mount and 1 meter extension cable, which may not fit ender 3 pro machine. if you wanna buy extra extension cable, please check the Asin: B08G8B23L7(copy and paste on search bar).
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: ANTCLABS
See On Amazon #8
BIGTREETECH HDMI5 V1.1 Touchscreen Monitor 5 inch IPS LCD Display 800 480 for Raspberry-Pi 4B/3B, BTT PI V1.2/PI 2 Compatible with SKR Mini E3 V3.0/Octopus/Manta M4P/M5P SKR 3 to Running Klipper
Asin: B0CMZYBPDF | Model: USA6-1040000039 | PartNumber: USA6-1040000039
Btt 5 Inch Hdmi Display Built-In Audio Decoding Circuit, Support 3.5Mm Headphone Jack Audio Output And Brightness And Display Direction Adjustment..
ă After-Sales ServiceăThe Manual And Installation Instructions Have Been Uploaded To Github, If You Have Any Problems During Use, Please Contact Us At The First Time, We Will Give You A Satisfactory Solution..
Widely Compatible B: Bigtreetech Hdmi5 V1.1 Display Working With Cb1/Cb2, Compatible With Manta M4p/M5p/M8p, Matan Ez E3 Board, It Can Running Klipper Touch Screen Mode..
4Pin Xh2.54 Breakout Port. The 4-Pins Xh2.54 Breakout Port Allows Custom Connection Via Usb Protocol, As Well As Screen Independent Power (Dc 5V), Giving Users More Diy Options..
Widely Compatible A: Btt Hdmi5 V1.1 Ips Lcd Display Compatible With Btt Pi V1.2/Pi 2 Or Cb1/Cb2+Pi4b, Can Working With Skr Mini E3 V3.0/Skr Pico/Skr V1.4 Turbo/Skr 3/Octopus Series/Kraken/Skr Pro V1.2 3D Printer Board, Running Klipper Touch Screen Mode. For Voron, Corexy, Vzbot, I3 3D Printers..
Bigtreetech 5 Inch Hdmi Touch Screen Adopts 5 Inch Ips Capacitive Touch Screen With A Resolution Of 800X480, 160Viewing Angle, Support Up To 5-Point Touch..
Features
- BIGTREETECH HDMI5 touchscreen desinged for users of 3d printers using the Klipper system. HDMI input, suitablec for Raspberry Pi4, PI4B+CB1/CB2, BTT PI V1.2/BTT PI 2, Banana Pi, Windows 10 8 7, and other mini PC.
- BIGTREETECH 5 inch hdmi touch screen adopts 5 inch IPS capacitive touch screen with a resolution of 800x480, 160viewing angle, support up to 5-point touch.
- BTT 5 inch hdmi display built-in audio decoding circuit, support 3.5mm headphone jack audio output and brightness and display direction adjustment.
- Widely Compatible A: BTT HDMI5 V1.1 IPS LCD display compatible with BTT PI V1.2/PI 2 or CB1/CB2+PI4B, can working with SKR Mini E3 V3.0/SKR Pico/SKR V1.4 Turbo/SKR 3/Octopus series/Kraken/SKR Pro V1.2 3D printer board, running Klipper touch screen mode. for Voron, CoreXY, VZbot, I3 3D Printers.
- Widely Compatible B: BIGTREETECH HDMI5 V1.1 display working with CB1/CB2, compatible with Manta M4P/M5P/M8P, Matan EZ E3 board, it can running Klipper touch screen mode.
- 4pin XH2.54 breakout port. The 4-pins XH2.54 breakout port allows custom connection via USB protocol, as well as screen independent power (DC 5V), giving users more DIY options.
- After-sales Service The manual and installation instructions have been uploaded to Github, If you have any problems during use, please contact us at the first time, we will give you a satisfactory solution.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.39 x 4.76 x 2.99 inches
See On Amazon #9
BIGTREETECH Pi V1.2 Control board 64bit Quad Core 1GB DDR3L 40-pin GPIO Compatible with SKR MINI E3 V3.0 Octopus/SKR V1.4 turbo to run Klipper/Linux/Debain For I3/CoreXY 3D Printer
Asin: B0C46B6X64 | Model: PI V1.2 | PartNumber: PI V1.2
ăSupport Display And MotherboardăBtt Pi V1.2 Core Board Display Adopts Malig32 Mp2 Gpu, Support Opengl3.2 And Hdmi2.0A Uhd 4K Video & Audio Output And Spi ScreenïŒBtt Hdmi5/7, Tft35 Spi), Onboard 4Xusb2.0 Port. Powerful High Performance Details And Clarity. Motherboard Support Skr Mini E3 V3.0, Skr Pico, Skr V1.4 Turbo, Skr 3, Kraken, Octopus Pro/Octopus V1.1 Series. Then Running Klipper Firmware..
ăFlexible PowerăSupport Usb-C 5V Power Supply And Dc12v-24V From A 3D Printer, Making It Easy And Efficient To Power Up The Board Without Any Extra Adapters Or Power Soucres..
ăRich ConnectivityăOnboard Standard 40-Pingpio Header, 3.5Mm Audio Jack, Tf Card Slot, Adxl345 Spi, Usb To Can Module(Requires Can Adapter V1.0 Module). Built-In Ir Receiver. Rj45 Port Support A 100Mbps Wired Network, Built-In 2.4G Wifi Module, Supports 100Mbps Wireless Network, Users Can Connect The Inlculde Wifi Antenna To Get A Stronger And More Stable Wifi Signa..
ăAbout SizeăBtt Pi V1.2 Control Board Size Is 85*56Mm, The Same As The Raspberry-Pi 3B/4B, Making It A Seamless Fit For Your Existing Projects..
Features
- Main Control Chip BIGTREETECH BTT Pi v1.2 board adopts ALLWINNER H616, 64-bit Quad-core, Cortex-A53@1.5GHz Processor, RAM is 1GB DDR3L SDRAM.
- About Size BTT Pi v1.2 control board size is 85*56mm, the same as the Raspberry-Pi 3B/4B, Making it a seamless fit for your existing projects.
- Support Display and Motherboard BTT Pi v1.2 core board display adopts MaliG32 MP2 GPU, support OpenGL3.2 and HDMI2.0A UHD 4K Video & Audio output and SPI screen BTT HDMI5/7, TFT35 SPI), onboard 4xUSB2.0 port. Powerful high performance details and clarity. Motherboard support skr mini e3 v3.0, skr pico, skr v1.4 turbo, skr 3, Kraken, Octopus pro/Octopus V1.1 series. then running Klipper firmware.
- Rich Connectivity Onboard standard 40-pinGPIO header, 3.5mm audio jack, TF card slot, adxl345 spi, USB to CAN module(requires CAN adapter V1.0 module). Built-in IR receiver. RJ45 port support a 100Mbps wired network, built-in 2.4G Wifi module, supports 100Mbps wireless network, users can connect the inlculde wifi antenna to get a stronger and more stable Wifi signa.
- Flexible Power Support USB-C 5V power supply and DC12V-24V from a 3D Printer, making it easy and efficient to power up the board without any extra adapters or power soucres.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.39 x 3.30 x 2.20 inches
See On Amazon #10
BIGTREETECH 2 Types BLTouch Extension Cables + Mount Bracket Compatible with Ender 3, Ender-3 Pro, Ender-3 V2, Ender-3S, CR-10, Ender 5, Ender 5 Pro with SKR Mini E3 V3.0, Octopus, Manta Series Board
Asin: B08G8B23L7 | Model: VVV001876 | PartNumber: VVV001876 | Ean: 0779605889906 | UPC: 779605889906
đ
[Premium Quality]: Made Of High Quality Metal Material, It Is Durable, Wear Resistant And High Strength..
đ
[Warm Notice ]: The Bltouch Extension Cable Can Not Fit For Cr10 3D Printer, Because The Terminal And Position Of Cable Are Different. You Can Change The Terminal And Rearrange The Position Of Cables By Flathead Screwdriver, Tweezers Or A Cutter..
đ
[Packing Includes]: 1 X Mount Bracket, 1X 1M Bl Touch Extension Cable, 1X 1.5M Bltouch Extension Cables, 2 X M3x8mm Screw, 2 X M3x6mm Screw..
đ
[Wide Application]: Suitable For Ender 3 V2, Ender-3, Ender-3S, Ender 3 Pro, Cr-10, Ender-5, Ender-5 Pro 3D Printer, Compatible With Skr Mini E3 V3.0, Octopus V1.1,Octopus Pro, Skr 3, Skr 3 Ez, Skr V1.4 Turbo, Manta M4p/M5p/M8p, Manta E3 Ez, Kraken, Mks Gen L... Series 3D Printer Motherboard.
Features
- [Easy to Install]: Simple operation and very easy to install.
- [Wide Application]: Suitable for Ender 3 V2, Ender-3, Ender-3S, Ender 3 Pro, CR-10, Ender-5, Ender-5 Pro 3D Printer, Compatible with SKR Mini E3 V3.0, Octopus V1.1,Octopus Pro, SKR 3, SKR 3 EZ, SKR V1.4 Turbo, Manta M4P/M5P/M8P, Manta E3 EZ, Kraken, MKS Gen L... series 3D Printer motherboard
- [Premium Quality]: Made of high quality metal material, it is durable, wear resistant and high strength.
- [Packing Includes]: 1 x mount bracket, 1x 1M bl touch extension cable, 1x 1.5M BLtouch extension cables, 2 x M3x8mm Screw, 2 x M3x6mm Screw.
- [Warm Notice ]: The bltouch extension cable can not fit for CR10 3D Printer, because the terminal and position of cable are different. You can change the terminal and rearrange the position of cables by flathead screwdriver, tweezers or a cutter.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH Direct
Weight: 0.06 ounces
See On Amazon #11
BIGTREETECH SKR Mini E3 V3.0 Motherboard + TFT35 E3 V3.0.1 Touch Screen Upgrade Kit for Ender-3 Ender-3 Pro 3D Printers, BTT 32-bit Silent Main Board Onboard TMC2209, Support Marlin/Klipper
Asin: B082HBZ3BH | Model: SKR MINI | PartNumber: SKR MINI
đ„ăSuperior Heat DissipationăUpgraded Skr Mini E3 V3.0 3D Printer Control Board Is Equipped With A Larger Aluminum Heat Sink Of Stepper Motor Driver Instead Of Pieces Small Heat Sink. Such Design Increases The Heat Dissipation Performance Of Skr Mini E3 V3 By 20%..
đ„ăTwo Working ModesăTft35 E3 V3.0.1 Touch Screen Supports Uart Serial Port Screen Mode(Touch Screen Mode) And 12864 Screen Mode. It Can Replace Original Display Of Ender-3 3D Printer. You Can Enjoy Two Printing Modes: Sd Card And U Disk..
đ„ăTft35 E3 V3.0.1 Touch Screenă Appearance Size: 93*87Mm, Power Input : 5V, This Is A 3.5 Inch Full-Color Screen With Ultra Clear Interface And Responsive Touch. Bigtreetech Tft35 E3 V3.0.1 Display Is Designed For Ender-3 3D Printer Especially, Which Can Be A Drop-In Replacement For Its Original Lcd Screen..
đ„ăDiy Friendly MainboardăBtt Skr Mini E3 V3.0 Motherboard Supports Bltouch, Rgb Lights, Blocking Detection And Shutdown Function. Our Skr Mini E3 V3 Also Supports Tft35 E3 V3.0.1/Tft35 V3.0.1/Tft28 V3.0 Touch Screen As Well As Original 12864 Lcd Screen..
Features
- Born for Ende-3 Series Printers Both BIGTREETECH SKR Mini E3 V3.0 mainboard and TFT35 E3 V3.0.1 touch screen are drop-in replacements for Ender-3 (same mouting holes, need to download firmware from GitHub web for update). And they are also compatible with Ende-3 pro, Ender-5, Ender-5 pro 3D printers.
- DIY Friendly Mainboard BTT SKR Mini E3 V3.0 motherboard supports BLTouch, RGB lights, blocking detection and shutdown function. Our SKR Mini E3 V3 also supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28 V3.0 touch screen as well as original 12864 LCD screen.
- Superior Heat Dissipation Upgraded SKR MINI E3 V3.0 3d printer control board is equipped with a larger aluminum heat sink of stepper motor driver instead of pieces small heat sink. Such design increases the heat dissipation performance of SKR Mini E3 V3 by 20%.
- TFT35 E3 V3.0.1 Touch Screen Appearance size: 93*87mm, power input : 5V, this is a 3.5 inch full-color screen with ultra clear interface and responsive touch. BIGTREETECH TFT35 E3 V3.0.1 display is designed for ender-3 3d printer especially, which can be a drop-in replacement for its original LCD screen.
- Two Working Modes TFT35 E3 V3.0.1 Touch screen supports UART serial port screen mode(touch screen mode) and 12864 screen mode. It can replace original display of Ender-3 3D printer. You can enjoy two printing modes: SD card and U disk.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #12
BIGTREETECH Octopus V1.1 Control Board 32bit Compatible TFT Series Screen, Support DIY Klipper Firmware and Raspberry-Pi Online Printing for Voron V2.4 Upgrade 3D Printer (with 8Pcs TMC2209)
Asin: B09713SRVP | Model: KINGPRINTER-UUU001949 | PartNumber: KINGPRINTER-UUU001949
đăMotherboard Expansion FunctionăSupport Bltouch, Locked-Rotor Detection, Shutdown After Printing, Resume Printing After Power Failure, Can Bus, U Disk Function, Iic Expansion; At The Same Time Reserved Wifi Interface, Pt100 Thermistor Interface (Optional), Dual Z-Axis Printer..
đăTmc2209 Driver ModeăTmc Motor Drivers Can Be Used In Spi Or Uart Mode By Simply Adjusting The Onboard Jumpers Beneath Each Motor Driver. Additionally You Can Connect Or Disconnect The Tmc Diag Pin Using An Onboard Jumper Allowing You To Use Hard Endstops Or Sensorless Homing Without The Need To Cut Any Pins..
đăTmc2209 Driver FeaturesăThe Tmc2209 Stepper Driver Is Not Easy To Lose Steps And Is In An Ultra-Quiet Mode; The Module Has A Large Area Of Heat Dissipation Pad, Which Can Reduce The Temperature Of The Driver When It Is Working; The Module Supports Three Modes: Step / Dir And Uart..
đăStrong Diy SupportăThis Motherboard Supports Up To 8 Stepper Drivers With 9 Stepper Driver Outputs In Total; And Up To 6 Pwm Fans And 2 Always-On Fans With The Ability To Individually Select The Voltage Rail That Will Drive Each Fan. Select From Vin, 12V Or 5V..
Features
- Main Control Chip Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
- Strong DIY Support This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
- Motherboard Expansion Function Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion; at the same time reserved WIFI interface, PT100 thermistor interface (optional), dual Z-axis printer.
- TMC2209 Driver Features The TMC2209 stepper driver is not easy to lose steps and is in an ultra-quiet mode; the module has a large area of heat dissipation pad, which can reduce the temperature of the driver when it is working; the module supports three modes: STEP / DIR and UART.
- TMC2209 Driver Mode TMC Motor drivers can be used in SPI or UART mode by simply adjusting the onboard jumpers beneath each motor driver. Additionally you can connect or disconnect the TMC DIAG pin using an onboard jumper allowing you to use hard endstops or sensorless homing without the need to cut any pins.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #13
BIGTREETECH SKR V1.4 Control Board 32bit Upgrade SKR V1.3 Motherboard, Compatible TFT35/TFT35 E3/TFT70 Touch Screen Mini12864 LCD Support TMC2209/EZ2209/TMC2208/TMC5160 for Most FDM 3D Printer
Asin: B0BHNVFR1M | Model: KINGPRINTER-1020000399 | PartNumber: KINGPRINTER-1020000399
âSupport 2.4, 2.8, 3.5-Inch Color Touch Screen, Support Lcd2004 Screen, Lcd12864 Screen; Upgrade Configuration Firmware Through Sd Card, Simple, Convenient And Efficient Operation..
âOn-Board Tmc Driver Spi Working Mode And Uart Working Mode, And The On-Board Diag Function Pins Are Convenient For Customers To Use, Eliminating The Complicated Wiring Process, Which Can Be Used By Simply Removing And Inserting The Jumper Cap; Functions Such As Continuous Power On, Material Detection, Shutdown After Power Off..
âIt Can Supply Power To Tft Screen, Bltouch, Neo-Pixel By Plugging In An External Dc5v Power Module; In Addition, I2c, Spi, Wifi Interface Is Reserved To Facilitate Customer Diy..
âEquipped With Highly Modular Open Source Firmware Marlin 2.0, Which Is Convenient For Users To Diy And Secondary Development..
Features
- Using 32-bit 100MHz ARM-class Cortex-M3 series LPC1768 main control chip, the performance is greatly improved.
- Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development.
- Support 2.4, 2.8, 3.5-inch color touch screen, support LCD2004 screen, LCD12864 screen; Upgrade configuration firmware through SD card, simple, convenient and efficient operation.
- It can supply power to TFT screen, BLtouch, Neo-pixel by plugging in an external DC5V power module; in addition, I2C, SPI, WIFI interface is reserved to facilitate customer DIY.
- On-board TMC driver SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap; Functions such as continuous power on, material detection, shutdown after power off.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #14
BIGTREETECH TFT35 E3 V3.0.1 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR Mini E3 SKR E3 DIP Board for Ender 3 CR10 3D Printer
Asin: B08181YY8D
â€ăMore Extension Ports Is ReservedăTft35 E3 V3.0.1 Display R Eserve The Extension Port Of Filament Breaking Detection,Automatic Shutdown After Printing,Also Wifi Function Can Be Realized By External Wifi Module Through Wifi Port..
â€ăQuality Warranty ăTft35 E3 V3.0.1 Touch Screen Is Designed And Produced By Bigtreetech Team,Any Questions And Feedback About That Please Free To Tell Us, We Have Professional Technical Team To Support You.
â€ăFirmware Updateă Tft35 E3 V3.0.1 Is Easy And Convenient To Update Firmware By Sd Card,Download From Our Github, Copy And Save It To Sd Card.Firmware Must Bed Reserved ,Then Re-Plug The Sd Card And Wait To 10S.The Firmware Has Been Successfully Updated..
â€ăTwo Working ModesăTft35 E3 V3.0.1 Touch Screen Support Uart Serial Port Screen Mode (Touch Screen Mode) And 12864 Screen Mode, It Can Replace Original Display Of Ender 3 3D Printer. You Can Enjoy Two Printing Modes: Sd Card And U Disk..
Features
- Touch Screen for Ender 3 Appearance size: 93*87mm, power input : 5V. This is a 3.5 inch full-color screen with ultra clear interface and responsive touch, it is designed for ender 3 3d printer especially, which can be a drop-in replacement for its original LCD screen.
- Two Working Modes TFT35 E3 V3.0.1 touch screen support UART serial port screen mode (touch screen mode) and 12864 screen mode, it can replace original display of Ender 3 3D printer. You can enjoy two printing modes: SD card and U disk.
- More Extension Ports is Reserved TFT35 E3 V3.0.1 display r eserve the extension port of filament breaking detection,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port.
- Firmware Update TFT35 E3 V3.0.1 is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must bed reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated.
- Quality Warranty TFT35 E3 V3.0.1 touch screen is designed and produced by BIGTREETECH team,any questions and feedback about that please free to tell us, we have professional technical team to support you
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #15
BIQU MicroProbe V2.0 Auto Bed Leveling Sensor Kit, 3D Printer Bed Leveling Sensor for Ender 3/Ender 3 V2/Ender 3 pro/Ender 3 Max/Voron /H2 Extruder with SKR Mini E3 V3.0,Octopus,Manta,SKR 3 Board
Asin: B0C89G7YH2 | Model: BIQU Microprobe V2.0 | PartNumber: BIQU Microprobe V2.0
â
ăDurable And Long LifespanăBiqu Microprobe V2.0 Bed Leveling Sensor Probe Uses Metal Probe, Makes Itself Wear-Resistant And Durable, Removable And Replaceable Probing Pin. With A Long Service Life Of Up To 10,000,000+ Probing Tests, Will Be A Perfect Upgrade For Your Printer. Compatible With Pei/Sticker/Glass/Metal Bed..
â
ăEasy InstallationăBtt Microprobe V2.0 Auto Bed Leveling Sensor Suitable For Ender 3/Ender 3 V2/Ender 3 Max, Voron Steathlburner/Afterburer, Ratrig Vc3, Biqu B1/Bx 3D Printer/H2 Series Extruder(Please Download The Mounting Bracket Stl File From Btt Github: Bigtreetech/Microprobe/Tree/Master), Comptabile With Corexy, Vzbot, I3 3D Printers..
â€ïžăAttentive Serviceă(Notes: Microprobe Works Differently From Bltouch/Cr Touch, The Firmware Must Be Re-Configured For Microprobe, If You Have Any Problems During Use, Please Contact Us At The First Time, We Will Give You A Satisfactory Solution..
â
ăWide ApplicationăBiqu Micro Probe Compatible With All Motherboards That Support Bltouch/Cr Touch, Such As Skr Mini E3 V3.0/Octopus V1.1/Octopus Pro/Skr V1.4 Turbo/Manta M4p/M5p/M8p/Skr 3/Ez, Manta E3 Ez, Kraken..32 Bit V4.2.7,Mks Gen L Series (Skr Mini E3 V3.0+ Microprobe Compatible Ender-3 Printer Firmware Has Been Compiled And Uploaded To Github)..
â
ăUltra Light And Smallă Bigtreetech Microprobe V2.0 Is 25.3Mm Long And Weighs 6G, Which Is 37% Shorter And 40% Lighter Than 3D Touch, Bl Touch/Cr Touch Auto Bed Leveling Sensors. It Adds Almost No Weight To The Extruder And Upgrade High-Precision Auto Leveling Capability..
Features
- High Precision BIQU MicroProbe V2.0 auto bed leveling sensor adopts electromagnetic components+photoelectric sensors chip, accuracy is 0.001mm Standard Deviation @24 C, 0.003mm Standard Deviation @60 C, compared to other auto bed leveling sensors, the accuracy is improved by 10 times.
- Ultra Light and Small BIGTREETECH Microprobe V2.0 is 25.3mm long and weighs 6g, which is 37% shorter and 40% lighter than 3D touch, BL touch/CR touch auto bed leveling sensors. it adds almost no weight to the extruder and upgrade high-precision auto leveling capability.
- Durable and Long Lifespan BIQU Microprobe V2.0 bed leveling sensor probe uses metal probe, makes itself wear-resistant and durable, removable and replaceable probing pin. With a long service life of up to 10,000,000+ probing tests, will be a perfect upgrade for your printer. Compatible with PEI/Sticker/Glass/Metal bed.
- Wide Application BIQU Micro probe compatible with all motherboards that support Bltouch/CR touch, such as SKR MINI E3 V3.0/Octopus V1.1/Octopus pro/SKR V1.4 turbo/Manta M4P/M5P/M8P/SKR 3/EZ, Manta E3 EZ, Kraken..32 Bit V4.2.7,MKS Gen L Series (SKR MINI E3 V3.0+ Microprobe compatible Ender-3 printer firmware has been compiled and uploaded to Github).
- Easy Installation BTT Microprobe V2.0 auto bed leveling sensor suitable for Ender 3/Ender 3 V2/Ender 3 Max, Voron SteathlBurner/Afterburer, RatRig VC3, BIQU B1/BX 3D Printer/H2 series Extruder(Please download the mounting bracket STL file from BTT Github: bigtreetech/MicroProbe/tree/master), comptabile with CoreXY, Vzbot, I3 3D Printers.
- Attentive service (Notes: Microprobe works differently from BLtouch/CR touch, the firmware must be re-configured for Microprobe, If you have any problems during use, please contact us at the first time, we will give you a satisfactory solution.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 1.09 x 1.14 x 0.39 inches | Weight: 0.01 ounces
See On Amazon #16
BIGTREETECH Smart Filament Runout Sensor, BTT SFS V1.0 1.75mm PLA/Filament Break Detection Sensor Compatible with Octopus V1.1/SKR Mini E3 V3.0/Octopus Pro/SKR V1.4 Turbo/Manta/SKR 3 Control Board
Asin: B0CLXRMM4R | Model: BIGTREETECH SFS V1.0 | PartNumber: BIGTREETECH SFS V1.0
â
Wide Application: Bigtreetech Btt Sfs V1.0 Smart Filament Sensor Support Motherboard With Broken Filament Detection Interface, Compatible With Skr Mini E3 V3.0/Skr Mini E3 V2.0/Octopus V1.1/Octopus Pro/Manta M4p/M5p/,Skr V1.4 Turbo/Mks Gen L Series Board, And Can Be Directly Connected To The Screen 2004.12864, Tft24/35/50/70 Touch Screen Display, Support 12864 And Uart Touch Screen..
â€ăFirmware Modification ăBtt Sfs V1.0 Smart Filament Sensor Use Marlin2.0.X Firmware, Please Follow Our Github Guide To Modify Firmware Of Your 3D Printer. If You Have Any Question In Setting Up, Please Feel Free To Contact Us For Help. We Have Professional After Sales Enginner Will Help You Solve It..
â
Btt Smart Filament Sensor V1.0 Support Marlin/Klipper Firmware And Bowden/Direct Driver Extruder, Input Power 3.3V-5V, 1.75Mm Filament..
â
Bigtreetech Smart Filament Runout Sensor It Can Detect Abnormal Extrusion Of Filament Caused By Nozzle Plugging, Filament Wrapping And Extruder Failure. It Will Automatically Stops Printing, So As To Remind You Of Loading Filament, And Prevent Jammed Filament Or Clogged Nozzles..
Features
- Material Upgrading: The upgraded material is more durable and has a longere service life, reduced friction between components and more responsive, the appearance is also more delicate and beautiful.
- BIGTREETECH smart filament runout sensor it can detect abnormal extrusion of filament caused by nozzle plugging, filament wrapping and extruder failure. It will automatically stops printing, so as to remind you of loading filament, and prevent jammed filament or clogged nozzles.
- Wide Application: BIGTREETECH BTT SFS V1.0 smart filament sensor support motherboard with broken filament detection interface, compatible with SKR MINI E3 V3.0/SKR MINI E3 V2.0/Octopus V1.1/Octopus Pro/Manta M4P/M5P/,SKR V1.4 Turbo/MKS GEN L series board, and can be directly connected to the screen 2004.12864, TFT24/35/50/70 touch screen display, support 12864 and UART touch screen.
- BTT smart filament sensor v1.0 support Marlin/Klipper firmware and bowden/direct driver Extruder, input power 3.3v-5v, 1.75MM filament.
- Firmware Modification BTT SFS V1.0 smart filament sensor use Marlin2.0.x firmware, please follow our github guide to modify firmware of your 3D printer. If you have any question in setting up, please feel free to contact us for help. we have professional after sales enginner will help you solve it.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 1.16 x 2.95 x 1.18 Inches | Weight: 0.13 Pounds
See On Amazon #17
BIGTREETECH TFT35 V3.0.1 Touch Screen Display with Two Working Modes Smart Controller Panel Compatible with LCD12864 WiFi for Octopus V1.1/ SKR V1.4 Turbo/SKR 3/Manta M4P/M5P SKR 3 Ender 3 3D Printer
Asin: B07VWGFKLZ | Model: K-03101171 | PartNumber: K-03101171 | Ean: 0778365968586 | UPC: 778365968586
â»ăMore Reserved Extensionsă: Tft35 V3.0.1 Touch Screen Reserves The Extension Ports Of Filament Break Detection, Automatic Shutdown After Printing, Also Wifi Function Can Be Realized By External Wifi Module Through Wifi Port. Compatible With Skr Mini E3 V3.0/Skr V1.4 Turbo/Octopus/Skr 3/Skr 3 Ez/Manta M4p/5P/8P Control Board..
â»ă100% Technical Supportsă: If You Have Any Problems About Btt Tft35 V3.0.1 Touchscreen, Please Feel Free To Contact Us On Amazon. Our Technical Supports Team Will Respon To You Within 24 Hours. 1-Year Warranty Is 100% Guaranteed!.
â»ăEasy Firmware Updatesă: It Is Easy And Convenient To Update Firmware By Sd Card, Simply Downloading From Github, Coping And Saving It To Sd Card. Firmware Must Be Reserved, Then Re-Plug The Sd Card And Wait To 10S. That's All Takes To Finish Updating On Firmware..
â»ăDual Working Modesă: Btt Tft35 V3.0.1 Display Enables Two Different Modes, With Options For Either Lcd12864 Encoder Mode, Or The Modern Colour Touch Screen Style. It Also Supports Both Sd Card And Usb Stick Printing..
Features
- 32 Bit Microprocessor : BIGTREETECH TFT35 V3.0.1 display adopted ARM Cortex-M3 series GD32F205VCT6 master controller chip with 32-bit CPU main frequency of 120 MHz, BTT TFT35 V3.0.1 touch screen can perfectly replace the LCD12864 screen for use.
- Dual Working Modes : BTT TFT35 V3.0.1 display enables two different modes, with options for either LCD12864 encoder mode, or the modern colour touch screen style. It also supports both SD card and USB stick printing.
- More Reserved Extensions : TFT35 V3.0.1 touch screen reserves the extension ports of filament break detection, automatic shutdown after printing, also WIFI function can be realized by external WIFI module through WIFI port. compatible with SKR MINI E3 V3.0/SKR V1.4 Turbo/Octopus/SKR 3/SKR 3 EZ/Manta M4P/5P/8P Control board.
- Easy Firmware Updates : It is easy and convenient to update firmware by SD card, simply downloading from Github, coping and saving it to SD card. firmware must be reserved, then re-plug the SD card and wait to 10s. That's all takes to finish updating on firmware.
- 100% Technical Supports : If you have any problems about BTT TFT35 V3.0.1 touchscreen, please feel free to contact us on Amazon. Our technical supports team will respon to you within 24 hours. 1-Year Warranty is 100% guaranteed!
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH Direct
See On Amazon #18
BIGTREETECH DIRECT SKR Mini E3 V2.0 Control Board 32Bit Silent Motherboard Integrated with TMC2209 UART Stepper Motor Driver for Upgraded Ender 3 Ender 3 Pro 3D Printer Control Board
Asin: B089CQ3DHB | Model: ZZB000412 | PartNumber: ZZB000412
đăSupport Various FunctionsăBtt Skr Mini E3 V2.0 Control Board Supports Various Function Extensions, Such As, Bltouch, Filament Detection, Resumption Of Shutdown, Shutdown After Shutdown, Etc ..
đăSatisfying Customer ServicesăIf You Need Any Information For Skr Mini E3 V2.0, You Could Contact Us On Amazon, And We'll Get Back To You Within 24 Hours..
đăNotesă Pay Attention To Correct Wiring, Avoid Motherboard Contact With Metal Objects, And Take Electrostatic Protection Measures..
đă 4 Layers For BoardăBigtreetech Direct Skr Mini E3 V2.0 Increased To 4 Layers On The Control Board's Back, So As To Improve On Heat Dissipation Signal Function And Anti-Interference..
đăBetter Thermal DissipationăThe Hot-Bed Mos Tube Uses Wsk220n04, Low On-Resistance, Which Reduces Heat Generation. Enlarged Heat Dissipation Area Protects Driving Chip And Components From Problems Caused By Heat Sink..
Features
- Silent Control Board BIGTREETECH Direct SKR MINI E3 V2.0 adopts ARM Cortex-M3 series STM32F103RCT6 main control chip with 32-bit CPU 72MHz, integrated with TMC2209 to enhance its stability. It's a super easy drop in replacement for Ender 3 printer.plug and playing.
- Better Thermal Dissipation The hot-bed MOS tube uses WSK220N04, low on-resistance, which reduces heat generation. Enlarged heat dissipation area protects driving chip and components from problems caused by heat sink.
- Support Various Functions BTT SKR MINI E3 V2.0 control board supports various function extensions, such as, BLtouch, filament detection, resumption of shutdown, shutdown after shutdown, etc .
- 4 Layers for Board BIGTREETECH Direct SKR MINI E3 V2.0 increased to 4 layers on the control board's back, so as to improve on heat dissipation signal function and anti-interference.
- Satisfying Customer Services If you need any information for SKR MINI E3 V2.0, you could contact us on Amazon, and we'll get back to you within 24 hours.
- Notes Pay attention to correct wiring, avoid motherboard contact with metal objects, and take electrostatic protection measures.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Origianl
Dimensions: 0.39 x 4.00 x 2.80 inches
See On Amazon #19
BIGTREETECH Upgrade Ender 3 Motherboard Silent Control Board SKR Mini E3 V2.0 32Bit with TMC2209 UART Stepper Driver 3D Printer Parts for Creality Ender3
Asin: B08SMFHSPV | Model: KINGPRINT-ZZB000514 | PartNumber: KINGPRINT-ZZB000514
đ»ăHot-Bed MosfetăThe Hot Bed Mos Tube Uses Wsk220n04, Low On-Resistance, Larger Heat Dissipation Area, And Reduce Heat Generation..
đ»ăAfter-Sales SupportăIf You Encounter Any Problems, Please Write Us Via Amazon As Soon As Possible. We Have Professional Technical After-Sales Personnel To Solve Your Problems;.
đ»ăUpgrade FeaturesăSupport Bltouch, Filament Detection, Power-Off Resume, Automatic Shutdown, Etc .; Increase The Distance Between The Driving Chip And The Components To Avoid The Trouble Caused By The Heat Sink;.
đ»ăCnc FanăBecause The Fan On The Skr Mini E3 V2.0 Control Board Is A Cnc Fan, You Need To Set The Wind Speed Before Using It. (Note: V2.0 Version Of The Fan Is Not Ready To Use After Power On)..
Features
- Main Control Chip Features This SKR Mini E3 V2.0 motherboard uses the STM32F103RCT6 main control chip, and its flash memory size is 256K.
- CNC Fan Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V2.0 version of the fan is not ready to use after power on).
- Hot-bed Mosfet The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation.
- Upgrade Features Support BLtouch, filament detection, power-off resume, automatic shutdown, etc .; Increase the distance between the driving chip and the components to avoid the trouble caused by the heat sink;
- After-sales Support If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales personnel to solve your problems;
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #20
BIGTREETECH Upgrade PI TFT70 TFT LCD Display DSI 800x480 for Raspberry Pi Model 3D Printer Controller(7in Capacitive Touch Screen) (165X100mm)
Asin: B09794LDY2 | Model: ZZB000530 | PartNumber: ZZB000530
â€ă5-Point TouchăIt Supports Raspberry Pi Dsi Display Interface, With Capacitive Touch Panel, And Supports 5-Point Touch. Capacitive Touch Control, Better Touch Response, Faster Response Time..
â€ă12 Months WarrantyăAll Parts Are Rigorously Tested Before Leaving The Factory. If There Is Any Problem With The Product, Can You Contact Us To Solve The Problem For You First? Our Technicians Are Always At Your Disposal.We Provide Product Exchange, Resend And Refund Services. We Are Committed To Customer Satisfaction..
â€ăEasy To UseăPi Tft70 V2.0. The Backlight Can Be Adjusted By A Rotary Encoder. Use An Fpc Cable To Connect The Screen To The Pi's Dsi Interface, And The Display Can Be Touched, Which Is Simple And Convenient..
â€ăHigh ResolutionăThis 7 Inch Lcd Touch Screen Has A Resolution Of 800 * 480 And A Display Area Of 165X100mm..
Features
- Wide range of applications 7 inch capacitive touch screen, specially designed for Raspberry Pi models. The onboard studs and positioning posts can fix the Raspberry Pi for stronger integrity
- High Resolution This 7 inch LCD touch screen has a resolution of 800 * 480 and a display area of 165X100mm.
- 5-point touch It supports Raspberry Pi DSI display interface, with capacitive touch panel, and supports 5-point touch. Capacitive touch control, better touch response, faster response time.
- Easy to use PI TFT70 V2.0. The backlight can be adjusted by a rotary encoder. Use an FPC cable to connect the screen to the Pi's DSI interface, and the display can be touched, which is simple and convenient.
- 12 MONTHS WARRANTY All parts are rigorously tested before leaving the factory. If there is any problem with the product, can you contact us to solve the problem for you first? Our technicians are always at your disposal.We provide product exchange, resend and refund services. we are committed to customer satisfaction.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIGTREETECH
See On Amazon ï»ż
Looking For Something Else?
Search