Topping A90 Discrete NFCA Headphone Amplifier Preamplifier 6.35mm/4.4mm Balanced/4-Pin-XLR Headphone Output R2R Relay Volume Control (Silver)
Asin: B0B4JRY19Z | Model: A90D-S | PartNumber: A90D-S
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.►2 Gain Settings► The A90 Discrete Has Two Gain Options, Which Are Enough To Cover A Wide Variety Of Headphones: Low Gain To Drive The Iems With High Sensitivity, And High Gain To Drive Full-Sized Over-Ears. Combined With The 0.2Uvrms Ultra-Low Noise, Even Sensitive Lems Will Not Suffer From Any Noise..
►A Headphone Amp, Also A Preamp► When It Is In Preamp Mode, You Can Get The Same High Performance As The Headphone Amp Mode, And The 20Ohm Se And 40Ohm Balanced Output Impedance Are Widely Suitable For Various Power Amplifiers. A90 Discrete Can Not Only Switch Between The Headphone Amp (Only Output From The Headphone Jack) And The Preamp(Only Output From Rca And Xlr), But Also Support The Output From All At The Same Time..
►Ground Loop Noise Terminator► Ground Loop Noise May Be Encountered When Multiple Devices Are Used In Combination. A90 Discrete Adds A Gnd/Lift Switch To Solve This Problem. When In Normal Use, Set It To Gnd; And When Ground Loop Noise Is Encountered, Switch It To Lift. Then The Ground Loop Noise Is Eliminated..
►High Output Voltage, High Current, Low Output Impedance, No Headphones That Can't Be Dealt With►High Output Voltage Can Easily Drive High Impedance Headphones; High Output Current Allows Low-Sensitivity Headphones To Obtain Enough Power; The Low Output Impedance Will Not Bring Unnecessary Effect On Fr When Driving Low-Impedance Headphones. Different Headphones Can Be Easily Driven By The A90 Discrete..
Features
- Fully discrete NFCA also create wonderful amp A90 Discrete uses fully discrete components to redesign the NFCA (Nested Feedback Composite Amplifier)module. 4 built-in NFCA-Discrete modules which each them uses 39 transistors build up fully balanced structure. The optimized Voltage Current hybrid feedback architecture along with UHGF (Ultra High Gain Feedback) technology provide excellent DC and AC performance.
- High output voltage, high current, low output impedance, no headphones that can't be dealt with High output voltage can easily drive high impedance headphones; High output current allows low-sensitivity headphones to obtain enough power; The low output impedance will not bring unnecessary effect on FR when driving low-impedance headphones. Different headphones can be easily driven by the A90 Discrete.
- 2 Gain settings The A90 Discrete has two gain options, which are enough to cover a wide variety of headphones: low gain to drive the IEMs with high sensitivity, and high gain to drive full-sized over-ears. Combined with the 0.2uVrms ultra-low noise, even sensitive lEMs will not suffer from any noise.
- Ground Loop Noise Terminator Ground loop noise may be encountered when multiple devices are used in combination. A90 Discrete adds a GND/LIFT switch to solve this problem. When in normal use, set it to GND; and when ground loop noise is encountered, switch it to LIFT. Then the ground loop noise is eliminated.
- A Headphone Amp, also a Preamp When it is in preamp mode, you can get the same high performance as the headphone amp mode, and the 20ohm SE and 40ohm balanced output impedance are widely suitable for various power amplifiers. A90 Discrete can not only switch between the headphone amp (only output from the headphone jack) and the preamp(only output from RCA and XLR), but also support the output from all at the same time.
- See more on Amazon...
Brand: KGUSS | Manufacturer: KGUSS
See On Amazon Similar To Topping A90 Discrete NFCA Headphone
#1
Topping DX3pro+ LDAC Headphone Amplifier - ES9038Q2M XU208 NFCA Bluetooth5.0 Audio Decoder USB/Opt/Coax DAC AMP Pre Amplifier with Remote Control (Black)
Asin: B09JC3TCJF | Model: TOPPING DX3pro+ | PartNumber: TOPPING DX3pro+
🎵 Bluetooth 5.0 - Connect The Bluetooth Of The Phone, Tablet Or Notebook To Dx3pro+, And Connect The Power Amplifier, Active Speakers Or Headphones To The Dx3pro+'S Output, Then Dx3pro+ Becomes Your Bluetooth Headphone Amp 1 Bluetooth Dac. You Can Easily Enjoy The High Quality Music And Convenience Brought By Bluetooth 5.0. If Your Device Supports Ldac Transmission, You Will Get Even Better Experience..
🎵 Dac+Pre-Amplifier Application - Topping Dx3pro+ Has A Simple Pre Amp Function That You Can Use To Adjust The Volume. The Digital Volume Ad- Justment Will Not Has Any Imbalance Between The Left And Right Channels..
🎵 High Performance Dac For Media Player - Whether It Is Apple Ios Device, Android Device And Media Player, As Long As It Supports Otg External Sound Card, It Can Be Connected To The Usb Input Of Dx3pro+ To Make Dx3pro+ Be Their External High Performance Dac..
🎵 About Topping Dx3 Pro+ - Equipped With The Latest Qcc5125 Chip, It Supports Ldac / Aac / Sbc / Aptx / Aptx Ll / Aptx Hd Protocols. It Uses The Es9038q2m Decoder, Supports High-Resolution Music Transmission, And Can Be Played Back With Clear Sound..
Features
- High-end audio - TOPPING DX3 Pro+ DAC is a high-performance DAC with USB, optical fiber, coaxial, Bluetooth input, Line Out, and headphone amplifier output.
- About Topping DX3 Pro+ - Equipped with the latest QCC5125 chip, it supports LDAC / AAC / SBC / APTX / APTX LL / APTX HD protocols. It uses the ES9038Q2M decoder, supports high-resolution music transmission, and can be played back with clear sound.
- Bluetooth 5.0 - Connect the Bluetooth of the phone, tablet or notebook to DX3Pro+, and connect the power amplifier, active speakers or headphones to the DX3Pro+'s output, then DX3Pro+ becomes your Bluetooth Headphone amp 1 Bluetooth DAC. You can easily enjoy the high quality music and convenience brought by Bluetooth 5.0. If your device supports LDAC transmission, you will get even better experience.
- High performance DAC for media player - Whether it is Apple IOS device, Android device and media player, as long as it supports OTG external sound card, it can be connected to the USB input of DX3Pro+ to make DX3Pro+ be their external high performance DAC.
- DAC+Pre-amplifier application - TOPPING DX3Pro+ has a simple Pre amp function that you can use to adjust the volume. The digital volume ad- justment will not has any imbalance between the left and right channels.
- See more on Amazon...
Brand: KGUSS | Manufacturer: KGUSS
Dimensions: 1.61 x 5.08 x 6.54 inches
Warranty: 30 days return policy. One year free repair period or more.
See On Amazon #2
Topping DX3 Pro+ ES9038Q2M Bluetooth 5.0 LDAC Audio Decoder DSD512 DAC AMP NFCA Headphone Amplifier Pre Amplifier (Black)
Asin: B09HBS8SLJ | Model: DX3 Pro+ | PartNumber: DX3 Pro+
Pre-Amplifier Function ：Adapt To Different Usage Scenarios, Dx3 Pro+ Has 4 Output Modes: Headphone Amp, Headphone Amp+ Line Out, Dac, And Pre Amplifier..
Bluetooth Headphone Amp / Bluetooth Dac Application： Connect The Bluetooth Of The Phone, Tablet Or Notebook To Dx3 Pro+, And Connect The Power Amplifier, Active Speakers Or Headphones To The Dx3 Pro+'S Output, Then Dx3 Pro+ Becomes Your Bluetooth Headphone Amp / Bluetooth Dac. If Your Device Supports Ldac Transmission, You Will Get Even Better Experience..
Pa3s Is The Best Power Amplifier For Dx3 Pro+： Pa3s Has Rca+Trs Balanced Inputs. When Used With Dx3 Pro+, The Trs Balanced Input Can Be Used To Input Other Audio Sources. The Output Power Of 80W X 2@4Ω, 10%Thd+N, 65W X 2@4Ω, 1%Thd+N Can Be Adapted To Most Situations Where Speakers Are Used..
Nfca Circuit ：The New Dx3 Pro+ Has The Nfca Circuit Optimized For This Unit, Giving The Ultra Low Noise And Distortion. It Pairs With High Sensitivity Iems And Power Hungry High Impedance Headphones Nicely..
Features
- Bluetooth 5.0 LDAC transmission DX3Pro+ has the certification of Hi-Res Audio Wireless and LDAC. It uses newest QCC5125 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Q2M to decode.
- NFCA circuit The new DX3 Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely.
- Pre-amplifier function Adapt to different usage scenarios, DX3 Pro+ has 4 output modes: Headphone Amp, Headphone Amp+ Line out, DAC, and Pre amplifier.
- PA3s is the best power amplifier for DX3 Pro+ PA3s has RCA+TRS balanced inputs. When used with DX3 Pro+, the TRS balanced input can be used to input other audio sources. The output power of 80W x 2@4 , 10%THD+N, 65W X 2@4 , 1%THD+N can be adapted to most situations where speakers are used.
- Bluetooth headphone amp / Bluetooth DAC application Connect the Bluetooth of the phone, tablet or notebook to DX3 Pro+, and connect the power amplifier, active speakers or headphones to the DX3 Pro+'s output, then DX3 Pro+ becomes your Bluetooth Headphone amp / Bluetooth DAC. If your device supports LDAC transmission, you will get even better experience.
- See more on Amazon...
Brand: Fanmusic | Manufacturer: TOPPING
See On Amazon #3
Topping E30 II DAC Preamp Audio Decoder- 2xAK4493S Hi-Res XMOS XU208 DAC 32Bit/768kHz DSD512 DSD Direct Mode for USB/Coax/Opt Inputs RCA HiFi Stereo Digital Audio Decoder(Black)
Asin: B0B7LBCLM5
👍 5V Power Supply,Anytime And Anywhere ▶️ E30 Ii Uses Dc5v For Power Supply, Which Can Easily Access Almost Everywhere. You Can Power It Up By Usb Port Of Pc, Mobile Phone Charger Or Even A Power Bank. The Built-In Protection Circuit Will Protect The E30 Ii And Prompt On The Screen After Connecting To The Wrong Power Supply..
👍 Pure Dac & Dac+Preamp Application ▶️ E30 Ii Is Able To Fix To Maxmum Output Level So That It Can Be Worked As A Pure Dac. E30 Ii Has Built-In Volume Control Function That Can Adjust The Volume From -99Db To 0Db By Using The Remote Control, So You Are Able To Directly Connect E30 Ii To Power Amplifier Or Active Speakers, And Control The Volume Of E30 Ii Through Remote Control..
👍 Discrete Lnrd ▶️ How To Solve The Noise Problem Of 5V Power Supply? The E30 Ii's Answer Is The Discrete Lnrd Circuit (Low Noise Reference Driver). The Discrete Lnrd Circuit Filters Out The Noise Of Various 5V Power Input And Provides Stable Power Supply Of Ultra-Low Noise Reference Level For E30 Ii. With This Technology, The Noise Floor Of E30 Ii Is Lower Than 1 .5Uv..
👍 Coaxial And Optical Also Has Good Performance ▶️ The Optical And Coaxial Input Of E30 Ii Supports Up To 24Bit192khz Audio, Which Is Suitable For Digital Turntables, Disk Players, Set-Top Boxes, And Game Consoles, So That Traditional Equipment Can Also Give A New Sound. The Digital Processing Module Provides Better Compatibility Than The E30..
Features
- Supports high-resolution audio TOPPING E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip.
- Coaxial and Optical also has good performance The optical and coaxial input of E30 II supports up to 24bit192kHz audio, which is suitable for digital turntables, disk players, set-top boxes, and game consoles, so that traditional equipment can also give a new sound. The Digital Processing module provides better compatibility than the E30.
- 5V power supply,anytime and anywhere E30 II uses DC5V for power supply, which can easily access almost everywhere. You can power it up by USB port of PC, mobile phone charger or even a power bank. The built-in protection circuit will protect the E30 II and prompt on the screen after connecting to the wrong power supply.
- Discrete LNRD How to solve the noise problem of 5V power supply? The E30 II's answer is the Discrete LNRD circuit (low noise reference driver). The Discrete LNRD circuit filters out the noise of various 5V power input and provides stable power supply of ultra-low noise reference level for E30 II. With this technology, the noise floor of E30 II is lower than 1 .5uV.
- Pure DAC & DAC+Preamp application E30 II is able to fix to maxmum output level so that it can be worked as a pure DAC. E30 II has built-in volume control function that can adjust the volume from -99dB to 0dB by using the remote control, so you are able to directly connect E30 II to power amplifier or active speakers, and control the volume of E30 II through remote control.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Warranty: One year free repair
See On Amazon #4
Topping DX1 Mini Stereo DAC Headphone Amplifier Combo - 280mW x2 Powerful Output Two-Stage GAIN Switch USB Chargable Discrete LNRD AK4493S XU208 384kHz/32bit Native DSD256 HiFi Home Audio (Black)
Asin: B0BFVT3LV5 | Model: TOPPING-DX1-BLACK-KGUSS | PartNumber: TOPPING-DX1-BLACK-KGUSS
👍 Plug And Play ▶️ Dx1 Has A Wide Range Of Compatibility: Windows 10, Windows 11, Mac, Linux, Ios, Android Can Be Plug And Play, Don't Need To Install A Driver. ( Except Windows Asio Applications).
👍 Pure Dac Function▶️ Dx1 Has Line Out With Fixed Volume, Which Can Be Used As A Pure Dac With Headphone Amplifiers, Power Amplifiers And Other Devices.👉👉👉Note, Please Consider The Following Information Before Deciding To Add To Cart. 1. Dx1 Does Not Use Nfca Module 2. The Volume Of Line Out Is Fixed At The Maximum And Cannot Be Adjusted 3. The Headphone Amplifier Output And The Line Output Will Come Out Simultaneously.
👍 Discrete Lnrd ▶️ The Discrete Lnrd Circuit Filters Out The Noise And Interference Of Usb 5V Power And Provides Stable And Clean Power Supply Of Ultra-Low Noise Reference Level For Dx1. With This Technology, The Noise Of The Dac Part Is Lower Than 2.0Uv, And The Noise Of The Amp Part Is Lower Than 1.0Uv. Even High Sensitive Iems Will Not Be Bothered By Noise..
👍 Powerful Output For Iems And Full-Size Headphones ▶️ With High/Low Gain Options And Two Outputs (6.35Mm And 3.5Mm), The Dx1 Is Ready For Iems, Full-Size Headphones, And Everything In Between. Despite Its Small Size, It Can Output Up To 280Mwx2 @32Ω And 51Mwx2 @300Ω Of Power..
Features
- Newest 32bit-AK4493S DAC chip The DX1 uses the newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. The DX1 decodes up to 32-bit/384kHz PCM in a stunning 120dB of dynamic range.
- Powerful Output for IEMs and Full-size headphones With high/low gain options and two outputs (6.35mm and 3.5mm), the DX1 is ready for IEMs, full-size headphones, and everything in between. Despite its small size, it can output up to 280mWx2 @32 and 51mWx2 @300 of power.
- Plug and Play DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play, don't need to install a driver. ( Except Windows ASIO applications)
- Discrete LNRD The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1. With this technology, the noise of the DAC part is lower than 2.0uV, and the noise of the AMP part is lower than 1.0uV. Even high sensitive IEMs will not be bothered by noise.
- Pure DAC Function DX1 has Line out with fixed volume, which can be used as a pure DAC with headphone amplifiers, power amplifiers and other devices. Note, please consider the following information before deciding to add to cart. 1. DX1 does not use nfca module 2. The volume of line out is fixed at the maximum and cannot be adjusted 3. The headphone amplifier output and the line output will come out simultaneously
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Dimensions: 0.04 x 3.94 x 3.86 inches
Warranty: One year free repair
See On Amazon #5
TOPPING DX3Pro+ LDAC NFCA Headphone Amplifier ES9038Q2M XMOS XU208 DAC Amp USB/Opt/Coax/Bluetooth DSD512 PCM768 Hi-Res Audio DAC DX3pro Plus with Remote Control (Black)
Asin: B09HBJ1WK6 | Model: TOPPING DX3 Pro+ | PartNumber: TOPPING DX3 Pro+
【Plug And Play, Turn Pc Into A Hifi Source】Dx3 Pro + Uses 2Nd Generation 8 Core Xmos Xu208, Usb Supports Up To Pcm32bit/768Khz And Dsd512 Native. It Also Compatible With A Variety Of Hifi Systems. And All Inputs Have Achieved Low Jitter, Let Listen To Music More Freely..
【Dac+Pre-Amplifier Application】Dx3pro+ Has A Simple Pre-Amp Function That You Can Use To Adjust The Volume. The Digital Volume Adjustment Will Not Has Any Imbalance Between The Left And Right Channels. Note: The Voltage Of The Power Adapter For Dx3pro+Is 15V..
The Voltage Of Dx3pro+ Supports 110-230V, Suitable For All Countries..
【Nfca Circuit And Decoding Amp Application】Dx3 Pro+ Has A Built-In Nfca Headphone Amplifier Module Tailored To It, Providing Low Noise And Distortion Far Superior To The Industry. Connect The Digital Signal And Earphone To Dx3 Pro+, It Can Be Used As A Decoder + Earphone, Bringing You Every Detail Of Music..
【High Performance Dac Circuit】Es9038q2m Through Meticulous Engineering Design And Attention To Details, Dx3 Pro+ Achieves 0.00015% Thd+N, Completely And High-Fidelity Restore The Sound Quality Of The Studio..
Features
- Bluetooth 5.0 & LDAC Transmission DX3 Pro+ is equipped with new QCC5125 Bluetooth chip and supports audio encoding such as LDAC/AAC/SBC/APTX/APTX LL/APTX HD. The audio is transmitted Wirelessly and decoded using ES9038Q2M for better sound quality.
- High Performance DAC Circuit ES9038Q2M through meticulous engineering design and attention to details, DX3 Pro+ achieves 0.00015% THD+N, completely and high-fidelity restore the sound quality of the studio.
- Plug And Play, Turn PC Into a HIFI Source Dx3 Pro + uses 2nd generation 8 core XMOS XU208, USB supports up to PCM32bit/768kHz and DSD512 native. It also compatible with a variety of HIFI systems. And all inputs have achieved low Jitter, let listen to music more freely.
- NFCA Circuit And Decoding Amp Application DX3 Pro+ has a built-in NFCA headphone amplifier module tailored to it, providing low noise and distortion far superior to the industry. Connect the digital signal and earphone to DX3 Pro+, it can be used as a decoder + earphone, bringing you every detail of music.
- DAC+Pre-amplifier application DX3Pro+ has a simple Pre-amp function that you can use to adjust the volume. The digital volume adjustment will not has any imbalance between the left and right channels. Note: The voltage of the power adapter for DX3pro+is 15V.
- The voltage of DX3pro+ supports 110-230V, suitable for all countries.
- See more on Amazon...
Brand: TOPPING | Manufacturer: TOPPING
Dimensions: 1.57 x 4.72 x 6.50 Inches | Weight: 1.10 pounds
See On Amazon #6
Topping D10s Mini USB DAC CSS XMOS XU208 ES9038Q2M OPA2134 Audio Amplifier Decoder Black
Asin: B08F54TT79 | Model: TOPPING D10s | PartNumber: TOPPING D10s | Ean: 0708200855863 | UPC: 708200855863
👍 Automatic Power On/Off ▶️ Although The Usb Port Support Power After Pc Has Shutdown,D10s Still Will Synchronously Power On/Off With Pc.
👍 Multiple Applications ▶️ ①Connect Topping D10s To Your Active Speakers.D10s Provide Not Only Dsd And Higher-Specification Pcm Compatibility But Also A Better Sound Quality Than Your Computer's Built-In Sound Card Or A Regular Dac;②You Can Connect D10s's Line Out To Your Amplifier/Headphone Amplifier's Input To Make D10s One Part Of Your Hifi System；③You Also Can Connect D10s's Coaxial/Optical Output To Your Dac, Then D10s Serve As A Usb Interface.
👍 Replaceable Op ▶️ It Has Op Amp Socket,Diyer Could Change The Op Amp To Get Different Sound.Notice:D10's Electrical Parameters Will Change If Use Other Op.
👍 Xmos Xu208 And Customized Driver ▶️ Toppping D10s Dac Use Xmos Xu208 For Usb Interface And Use Customized Driver Which From Thesycon For Better Compatibility With High Resolution Audio File Especially Dsd Native.And Use Ess Es9038q2m To Make Thd+N As Low As 0.0002%@1Khz.
Features
- Up to DSD256 and PCM384 TOPPING D10s USB DAC is compatible with 16-32bit/44.1-384kHz and DSD64 - DSD256(support both Dop and Native) If you need a DSD configuration guide, please contact the seller HIFI COLLEGE.
- XMOS XU208 and Customized Driver TOPPPING D10s DAC use XMOS XU208 for USB interface and use customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native.And use ESS ES9038Q2M to make THD+N as low as 0.0002%@1kHz
- Automatic Power On/Off Although the USB port support power after PC has shutdown,D10s still will synchronously power on/off with PC
- Replaceable OP It has OP amp socket,DIYer could change the OP amp to get different sound.Notice:D10's electrical parameters will change if use other OP
- Multiple Applications Connect TOPPING D10s to your active speakers.D10s Provide not only DSD and higher-specification PCM compatibility but also a better sound quality than your computer's built-in sound card or a regular DAC; You can connect D10s's line out to your amplifier/headphone amplifier's input to make D10s one part of your HIFI system You also can connect D10s's coaxial/optical output to your DAC, then D10s serve as a USB interface
- See more on Amazon...
Brand: KGUSS | Manufacturer: KGUSS
Weight: 0.99 Pounds
Warranty: 30 days return policy. One year free repair period or more.
See On Amazon #7
Topping L30 II NFCA Headphone Amplifier Hi-Res Audio 560mW 2 L30II AMP (Black)
Asin: B0B7JHR1RC | Model: L30 II | PartNumber: L30 II
Low Distortion While Outputting High Power: The L30 Ii Can Maintain Ultra-Low Distortion Output Under High Power Load. Under 32 Ohm Load And 2500Mw Output, The Thd+N Is Lower Than 0.00008%; Under 300 Ohm Load And 300Mw Output, The Thd+N Is Lower Than 0.00007%..
Three Gain Settings To Suit Different Needs: L30 Ii Has Three Gain Options: -14Db, 0Db, 16.5Db. Improved Gain Settings Can Cover A Wider Range Of Needs To Meet The Needs Of Different Headphones From Low-Sensitivity Full-Sized Over-Ears To High-Sensitity Iems. With The Help Of Extremely Low Noise 0.3Uv, Even Iems Will Not Hear Any Background Noise..
Compatible With Almost All Kinds Of Headphones: L30 Ii's Output Has High Output Voltage, High Current, Low Output Impedance, So No Headphones That Can't Be Dealt With. High Output Voltage Can Easily Drive High Impedance Headphones; High Output Current Allows Low- Sensitivity Headphones To Obtain Enough Power; The Low Output Impedance Will Not Bring Unnecessary Effect On Fr When Driving Low-Impedance Headphones.， Different Headphones Can Be Easily Driven By The L30 Ii..
Features
- Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 3002 load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N.
- Compatible with almost all kinds of headphones: L30 II's output has high output voltage, high current, low output impedance, so no headphones that can't be dealt with. High output voltage can easily drive high impedance headphones; High output current allows low- sensitivity headphones to obtain enough power; The low output impedance will not bring unnecessary effect on FR when driving low-impedance headphones. Different headphones can be easily driven by the L30 II.
- Low distortion while outputting high power: The L30 II can maintain ultra-low distortion output under high power load. Under 32 ohm load and 2500mW output, the THD+N is lower than 0.00008%; under 300 ohm load and 300mW output, the THD+N is lower than 0.00007%.
- Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to high-sensitity IEMs. With the help of extremely low noise 0.3uV, even IEMs will not hear any background noise.
- See more on Amazon...
Brand: Fanmusic | Manufacturer: L30 II
Warranty: 1 year warranty
See On Amazon #8
Topping E30II lite DAC Preamp - AK4493S Hi-Res XMOS XU208 DAC 32Bit/768kHz DSD512 DSD Direct Mode for USB/Coax/Opt Inputs RCA HiFi Stereo Digital Audio Decoder(Black)
Asin: B0C9GLHRT7 | Model: E30II lite-Black | PartNumber: E30II lite-Black
👍Preamp Mode▶️ The E30 Ii Lite Is Equipped With A Built-In Volume Control Function That Makes It Easy To Adjust The Volume From -99Db To 0Db Using The Remote Control. The E30 Ii Lite Can Also Be Connected Directly To An Amplifier, Pure Power Amplifiers Or Active Speakers, Controlling The Volume Level Through The E30 Ii Lite, Allowing You To Enjoy Music More Comfortably..
👍Good Partner ——L30 Ii Headphone Amplifier ▶️ E30 Ii Lite And L30 Ii Have The Same Design Concept, Both Detailed Workmanship And Sound Quality Performance Show The High Quality Of The Product. The L30ii Headphone Amplifier Can Drive Most Of The Headphones On The Market And Match Perfectly. Whether You Are A Music Enthusiast Or An Everyday User, Its Excellent Sound Quality Can Meet Your Needs..
👍Coaxial And Optical▶️ The Optical And Coaxial Input Of E30 Ii Lite Supports Up To 24Bit/192Khz, Which Is Suitable For Digital Turntables, Cd Players, Set-Top Boxes And Game Consoles, So That Traditional Equipment Can Also Give A New Sound..
👍Professional Performance, Instant Listening▶️ E30 Ii Lite Supports Playback Of Audio Streams Up To Dsd512 And Pcm768khz. E30 Ii Lite Is Widely Compatible With Operating Systems Including Windows 10, Windows 11, Mac, Linux And Ios/Android Systems. Simply Connect The Audio Source And Use E30 Ii Lite Immediately. Only The Driver Installation And Setup Is Required To Use Asio Applications On Windows Systems*..
Features
- Supports high-resolution audio The E30 II lite uses AKM's VELVET Sound technology's sub-flagship AK4493S chip. It has won wide acclaim from audio enthusiasts for its outstanding performance and top-notch sound quality. With the AK4493S, the E30 II lite has a dynamic range of up to 121dB and THD <0.0004%. This not only ensures the high accuracy of audio signal restoration but also gives you a live music experience as if you were there.
- Professional performance, instant listening E30 II lite supports playback of audio streams up to DSD512 and PCM768kHz. E30 II lite is widely compatible with operating systems including Windows 10, Windows 11, MAC, Linux and iOS/Android systems. Simply connect the audio source and use E30 II lite immediately. Only the driver installation and setup is required to use ASIO applications on Windows systems*.
- Preamp Mode The E30 II lite is equipped with a built-in volume control function that makes it easy to adjust the volume from -99dB to 0dB using the remote control. The E30 II lite can also be connected directly to an amplifier, pure power amplifiers or active speakers, controlling the volume level through the E30 II lite, allowing you to enjoy music more comfortably.
- Coaxial and Optical The optical and coaxial input of E30 II lite supports up to 24bit/192kHz, which is suitable for digital turntables, CD players, set-top boxes and game consoles, so that traditional equipment can also give a new sound.
- Good partner L30 II headphone amplifier E30 II lite and L30 II have the same design concept, both detailed workmanship and sound quality performance show the high quality of the product. The L30II headphone amplifier can drive most of the headphones on the market and match perfectly. Whether you are a music enthusiast or an everyday user, its excellent sound quality can meet your needs.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
See On Amazon #9
Topping D50 III DAC Preamplifier - LDAC Bluetooth 5.1 Dual ES9039Q2M D/A Chips Supports DSD512 PCM768kHz,PEQ Adjustment and Remote Control (Silver)
Asin: B0CXT8YDMY | Model: D50 III | PartNumber: D50 III
👍 Plug And Play ▶️ D50 Iii Has A Wide Range Of Compatibility And Applies To Various Os Such As Windows 10, Windows 11, Mac, Linux And Ios/Android. Only For Windows Asio Applications, You Need To Install The Driver And Set It Up. The Usb Hardware Is Based On Xmos Xu316 Andthesycon Driver (Drivers Only For Windows, Other Os Needn't Driver). In Addition, The D50 Iii Supports Up To Pcm768khz/32Bit And Dsd512..
👍 Preamplifier Function - Desktop Speaker Companion ▶️ In Addition To The Dac Mode, The D50 Iii Also Has A "Preamp" Mode. In Preamp Mode, You Can Adjust The Volume At D50 Iii, Maximizing Ease Of Use With Active Speakers Or Pure Power Amplifiers..
👍 Perfect Partner—A50 Iii ▶️ The D50 Iii And A50 Iii Have The Same Design Language. This Combination Has Unique Metallic Aesthetics No Matter How It's Placed. And They Meet The Needs Of Most Headphones And Active Speakers. The A50 Iii Can Also Be Switched On And Off With The D50 Iii Via 12V Trigger..
👍 Ten-Band Peq Adjustment ▶️ We Develop A Brand New Peq Adjustment*That Supports Ten Customizable Frequency Bands. Topping's Brand New Peq Algorithm And Desktop Software Allow You To Fine-Tune The Frequency, Gain, And Bandwidth Of Each Peq Band. The Software Supports The Import Of Target And Original Curves As Well As The Compensation Of Curves Using Target Curves. It Can Also Save Multiple Profiles For Easy Switching.*The Peq Function Supports Up To Pcm 192Khz/32Bit. This Function Is Supported Only For Usb Input..
👍 Choose Your Output Mode At Will ▶️ The D50 Iii Has Not Only Rca Output, But Also Trs Balanced Output, Which Are Widely Used In The Professional Field. In Addition To The Versatile Trs 4V And Rca 2V Outputs, The D50 Iii Adds Trs 5V And Rca 2.5V. Adapt More Devices When Selecting Trs 4V And Rca 2V. Take Performance To The Next Level When Selecting Trs 5V And Rca 2.5V..
👍 Dual Type-C Interface,Fast And Stable ▶️ Use Type-C For Signal Transmission And Power. It Is Recommended To Add An Auxiliary Power Supply For Better Performance When The D50 Iii Is Often Fixed On A Desktop Or Connected To A Cell Phone For Use..
👍 Ldac Wireless Available ▶️ D50 Iii Is Equipped With Qcc5125 And Bluetooth 5.1. It Is Compatible With Ldac/Aptx-Adaptive/Aptx-Hd/Aac/Sbc, Supporting Up To 96Khz/24Bit. So That High-Quality Audio Can Be Transmitted Wirelessly To Obtain Music Experience Beyond Cd Level..
Features
- TOPPING D50 III - 3rd Generation Upgraded Version The D50 III uses 2x ES9039Q2M, one for the left channel and another for the right channel,which delivers higher SNR(132dB), higher dynamic range(132dB), and lower distortion(<1.3uVrms) than the D50s. A brand new I/V conversion circuit is designed for better audio reproduction. The D50 III's ability to restore music has reached a new level with its details perfectly displayed.
- LDAC wireless available D50 III is equipped with QCC5125 and Bluetooth 5.1. It is compatible with LDAC/aptX-Adaptive/aptX-HD/AAC/SBC, supporting up to 96kHz/24bit. So that high-quality audio can be transmitted wirelessly to obtain music experience beyond CD level.
- Plug and play D50 III has a wide range of compatibility and applies to various OS such as Windows 10, Windows 11, MAC, Linux and iOS/Android. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU316 andThesycon driver (Drivers only for Windows, other OS needn't driver). In addition, the D50 III supports up to PCM768kHz/32bit and DSD512.
- Dual Type-C interface,Fast and stable Use Type-C for signal transmission and power. It is recommended to add an auxiliary power supply for better performance when the D50 III is often fixed on a desktop or connected to a cell phone for use.
- Ten-band PEQ adjustment We develop a brand new PEQ adjustment*that supports ten customizable frequency bands. Topping's brand new PEQ algorithm and desktop software allow you to fine-tune the frequency, gain, and bandwidth of each PEQ band. The software supports the import of target and original curves as well as the compensation of curves using target curves. It can also save multiple profiles for easy switching.*The PEQ function supports up to PCM 192kHz/32bit. This function is supported only for USB input.
- Choose your output mode at will The D50 III has not only RCA output, but also TRS balanced output, which are widely used in the professional field. In addition to the versatile TRS 4V and RCA 2V outputs, the D50 III adds TRS 5V and RCA 2.5V. Adapt more devices when selecting TRS 4V and RCA 2V. Take performance to the next level when selecting TRS 5V and RCA 2.5V.
- Preamplifier function - Desktop speaker companion In addition to the DAC mode, the D50 III also has a preamp mode. In preamp mode, you can adjust the volume at D50 III, maximizing ease of use with active speakers or pure power amplifiers.
- Perfect partner A50 III The D50 III and A50 III have the same design language. This combination has unique metallic aesthetics no matter how it's placed. And they meet the needs of most headphones and active speakers. The A50 III can also be switched on and off with the D50 III via 12V Trigger.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Warranty: 1 YEAR WARRANTY
See On Amazon #10
Topping D90 III Sabre MQA Full Balance HiFi DAC Bluetooth 5.1 ES9039SPROx2 DSD512 PCM32bit/768kHz USB/Coax/Opt/AES/IIS Desktop Audio Preamp (Black)
Asin: B0CQJVDTRH | Model: TOPPING D90 III SABRE | PartNumber: TOPPING D90 III SABRE
Brand New I/V Conversion - A Brand New I/V Conversion Circuit Is Designed For Better Quality Audio Reproduction. The New Circuit Design Provides Lower Distortion And Lower Noise While Occupying Less Space. The New Circuit Is Pushed Close To The Limit Of Physics So That We Are Able To Squeeze Out The Last Bit Of Performance Of The Dac Chip..
Universal Compatibility And Ease Of Use - The D90 Iii Is A Breeze To Use With Its Wide Compatibility Range. It Supports Various Operating Systems Like Windows, Mac, Linux, And Ios/Android. For Windows Asio, A Simple Driver Setup Is All It Takes. The Device's Usb Hardware Is Based On Xmos Xu316 And Thesycon Drivers, Ensuring Stability And Reliability..
Ldac Wireless Available - D90 Iii Sabre Is Equipped With Qcc5125 And Bluetooth 5.1, Supports Ldac/Aptx-Adaptive/Aptx-Hd/Aac/Sbc. It Can Support Up To 96Khz/24Bit, So That High-Quality Audio Can Be Transmitted Wirelessly To Obtain Music Experience Beyond Cd Level..
Advanced Cpld Processing - We Achieved Incredible Jitter Rejection Using Cpld To Process The Clock Signal And Optimize The Digital Signal.Regardless Of Usb, Optical, Coaxial, Aes Input, Jitter Is As Low As -160Db..
Features
- Two ES9039SPRO chips - Each of the left and right audio channels independently utilizes an ES9039SPRO, providing higher SNR (135dB) , greater dynamic range, and lower distortion (<0.000045% THD+N) compared to the D90SE. Clearer details flow into your ears.
- Advanced CPLD processing - We achieved incredible jitter rejection using CPLD to process the clock signal and optimize the digital signal.Regardless of USB, optical, coaxial, AES input, jitter is as low as -160dB.
- Brand new I/V conversion - A brand new I/V conversion circuit is designed for better quality audio reproduction. The new circuit design provides lower distortion and lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip.
- LDAC wireless available - D90 III SABRE is equipped with QCC5125 and Bluetooth 5.1, supports LDAC/aptX-Adaptive/aptX-HD/AAC/SBC. It can support up to 96kHz/24bit, so that high-quality audio can be transmitted wirelessly to obtain music experience beyond CD level.
- Universal compatibility and ease of use - The D90 III is a breeze to use with its wide compatibility range. It supports various operating systems like Windows, Mac, Linux, and iOS/Android. For Windows ASIO, a simple driver setup is all it takes. The device's USB hardware is based on XMOS XU316 and Thesycon drivers, ensuring stability and reliability.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Dimensions: 1.77 x 9.06 x 6.30 Inches
See On Amazon #11
Topping A30 Pro NFCA Headphone Amplifier OPA1656 4PIN XLR 4.4MM 6.35MM Output Balanced Input Amplifier (Black)
Asin: B08Y87LK94 | Model: A30 Pro | PartNumber: A30 Pro | Ean: 0791270538873 | UPC: 791270538873
Incredible Output Power： The New Specifically Redesigned Nfca Based Circuit Is Optimized For Terrific Single Ended Performance.
The A30pro Already Provides You All In A Compact Body, Including 4-Pin-Xlr，4 .4Mm, 6.35Mm..
A30pro Provides 3 Step Gain Settings, Which Can Easily Adapt To The Huge Sensitivity Span From Iems To High Im Pedance And Full Size Over-Ears. Just Connect The Earphones And Leave The Rest To The A30pro..
A30pro Uses The New Specifically Redesigned Nfca Based Circuit Is Optimized For Terrific Single Ended Per Formance. Massive Paralleled High Performance Audio Opamp Architecture Along With Uhgf Technology Provides Excellent Dc And Ac Performance..
Features
- The THD+N of A30Pro is no higher than 0.00006% which means the A30Pro accurately restores 99.99994% of the original sound.
- A30Pro uses the new specifically redesigned NFCA based circuit is optimized for terrific single ended per formance. Massive paralleled high performance audio opamp architecture along with UHGF technology provides excellent DC and AC performance.
- Incredible output power The new specifically redesigned NFCA based circuit is optimized for terrific single ended performance
- A30Pro provides 3 step gain settings, which can easily adapt to the huge sensitivity span from IEMs to high im pedance and full size over-ears. Just connect the earphones and leave the rest to the A30Pro.
- The A30Pro already provides you all in a compact body, including 4-PIN-XLR 4 .4mm, 6.35mm.
- See more on Amazon...
Brand: TOPPING | Manufacturer: Fanmusic
See On Amazon #12
Topping PRE90 Preamplifier Hi-Res Audio NFCA Modules RCA Balanced XLR Output for D90se D90 A90 EXT90 Audio DAC with Remote Control (Sliver)
Asin: B09WZZRSXJ | Model: pre90 | PartNumber: pre90
► Ultra-High Performance Nfca Modules ► Pre90 Uses The Similar Nfca ( Nested Feedback Composite Amplifier )Module From Flagship A90 Voltage Current Hybrid Feedback Architecturelong With Uhgf ( Ultra High Gain Feedback ) Technology Provides Excellent Dc And Ac Performance. Ultra-Low Noise Of 0.3Uv Is Milesahead Of The Competition, Giving An Absurdly High Dynamic Range Of 145Db And No Audible Noise And Darkest Background..
► Ext90 Could Extend You More Inputs ► A Standard Pre90 Provide You 1 X Rca And 1 X Xlr Stereo Inputs. But When It Working With A Ext90, They Could Provide Totally 2 X Rca And 4 X Xlr Stereo Inputs. This Is Enough For Multi Source Systems..
►Relay Volume Control ► A Large Number Of High Quality Japanese Small Signal Relayised Fovolume Control Of Pre90. Brings The Advantages Of Precise Control Remote Control, Longevity, And Complete Channel Balanceif The Volume Was Set High While Turn On Or Switch In, Pre90 Will Automatically Reduced To A Safe Volume To Avoid Your Speakers/Headphones Blown By Sudden High Volume..
► Selectable Xlr / Rca Output ► The Output Of Pre90 Could Be Config To “Xlr Only”, "Rca Only" Or "Xlr + Rca ". Therefore, The Amplified Signal Can Be Connected To Two Different Amplifiers. Good Combination With Ext90 D90..
Features
- TOPPING Pre90 Preamplifier Pre90 adopts full balanced structure, which can handle balanced and single-ended signal processing. The output can be balanced, sin-gle-ended, balanced + single-ended. With the balanced + single-ended two-way input, in addition to the normal preamplifier usetage, Pre90 can be used for "balanced to sin-gle-ended"or "single-ended to balanced"signal conversion.
- Selectable XLR / RCA output The output of Pre90 could be config to XLR only , RCA only or XLR + RCA . Therefore, the amplified signal can be connected to two different amplifiers. Good combination with EXT90 D90.
- Ultra-high Performance NFCA modules Pre90 uses the similar NFCA ( Nested Feedback Composite Amplifier )module from flagship A90 Voltage Current hybrid feedback architecturelong with UHGF ( Ultra High Gain Feedback ) technology provides excellent DC and AC performance. Ultra-low noise of 0.3uv is milesahead of the competition, giving an absurdly high dynamic range of 145db and no audible noise and darkest background.
- Relay volume control A large number of high quality Japanese small signal relayIsed fovolume control of Pre90. Brings the advantages of precise control remote control, longevity, and complete channel balanceIf the volume was set high while turn on or switch in, Pre90 will automatically reduced to a safe volume to avoid your speakers/headphones blown by sudden high volume.
- Ext90 could extend you more inputs A standard Pre90 provide you 1 x RCA and 1 x XLR stereo inputs. But when it working with a Ext90, they could provide totally 2 x RCA and 4 x XLR stereo inputs. This is enough for multi source systems.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Dimensions: 1.57 x 4.72 x 6.61 inches
See On Amazon #13
Topping E30II Hi-Res Audio USB DAC 2 x AK4493S Chip XU208 DSD512 32bit/768kHz HiFi DAC USB/Opt/Coax Input RCA Analog Output Desktop Digital Audio Converters (Black)
Asin: B0B7M8ZQ63 | Model: TOPPING E30 II Black | PartNumber: TOPPING E30 II Black
【Optical And Coaxial Performance】Via The Optical And Coaxial Inputs, Enjoy 24 Bit/192Khz Hifi Audio. Breathe New Life Into Your Digital Turntables, Disk Players, Set-Top Boxes, And Game Consoles..
【Pure Dac Application】In Pure Dac Mode, Dsd Signal Will Bypass The Datt Soft Mute And ∆E Modulator To Provide You A Pure/Direct Dsd Performance..
【Discrete Lnrd】Topping Has Implements Discrete Lnrd Circuits In E30 Ii. This Circuit Modes Out All Kinds Of Noise Input By 5V Power Supply, And Effectively Lowering The Noise Floor To <1.5Uv..
【Plug And Play】Turn Your Pc Into A Hifi Source Just By Connecting It To The E30 Ii With A Usb Cable. E30ii Applicable To A Variety Of Pc Systems. Usb Input Support Up To 32Bit/768Khz, Dsd512(Active), Dsd256(Dop)..
Features
- Two AK4493S decoding chips TOPPING E30 II uses two AK4493S chips. With dual upgraded DAC chips, it achieves better SINAD, SNR, dynamic range, and noise level.
- Plug and play Turn your PC into a HIFI source just by connecting it to the E30 II with a USB cable. E30II applicable to a variety of PC systems. USB input support up to 32bit/768kHz, DSD512(Active), DSD256(Dop).
- Optical and coaxial performance Via the optical and coaxial inputs, enjoy 24 Bit/192kHz hifi audio. Breathe new life into your digital turntables, disk players, set-top boxes, and game consoles.
- Discrete LNRD TOPPING has implements discrete LNRD circuits in E30 II. This circuit modes out all kinds of noise input by 5V power supply, and effectively lowering the noise floor to <1.5uV.
- Pure DAC application In pure DAC mode, DSD signal will bypass the DATT Soft Mute and E Modulator to provide you a pure/direct DSD performance.
- See more on Amazon...
Brand: AOSHIDA | Manufacturer: TOPPING
Dimensions: 1.89 x 7.95 x 6.30 Inches | Weight: 0.66 pounds
See On Amazon #14
Topping A70 Pro Fully Balanced Headphone Amplifier 17000mW*2 Relay Volume Control Pre Amp wiht Remote Control(Black)
Asin: B0C59245R5 | Model: A70 pro | PartNumber: A70 pro
Aurora Ui，Bring New Experience： Full Color Screen And Three Touch Buttons Experience Has Changed Since.Colors Jump Out At You The Display Of The Playback Information, Fft, Vu Can Be Switched According To Your Requirements..
A Headphone Amp, Also A Preamp: The A70 Pro Drives Headphones Well, And It Can Also Be Used As A Preamp. It Has The Same High Performance As The Headphone Amp Mode, With An Rca Output Impedance Of Only 500 And An Xlr Output Impedance Of Only 100Ω, Allowing It To Be Used With A Wide Range Of Input Impedance For Various Power Amplifiers. In Addition, A Full-Featured Remote Control Makes Operation Even Easier..
Relay Volume Control: A70 Pro Uses Relays And Resistor Networks To Form R2r Volume Control Module, Which Providing Precise Volume Control, Long Service Life, And Will Not Deviate Even At Low Volume..
Ground Loop Noise，Disappearing Magic： When Multiple Devices Are Used In Combination, Ground Loop Noise May Be Encountered. A70 Pro Adds A Gnd/Lift Switch, When Ground Loop Noise Is Encountered Switch To Lift And The Noise Will Disappear..
Features
- Re-optimized new circuit architecture Newly developed ultra-low noise input stage further improved the noise performance of balanced input and increased the input impedance to 20k thus having better compatibility with incoming devices. The gain architecture has also been redesigned to further reduce noise and distortion at high gain states than the previous architecture.
- Ground Loop Noise Disappearing magic When multiple devices are used in combination, ground loop noise may be encountered. A70 Pro adds a GND/LIFT switch, when ground loop noise is encountered switch to LIFT and the noise will disappear.
- Aurora UI bring new experience Full color screen and three touch buttons Experience has changed since.Colors Jump out at you The display of the playback information, FFT, VU can be switched according to your requirements.
- Relay volume control: A70 Pro uses relays and resistor networks to form R2R volume control module, which providing precise volume control, long service life, and will not deviate even at low volume.
- A Headphone Amp, also a Preamp: The A70 Pro drives headphones well, and it can also be used as a preamp. It has the same high performance as the headphone amp mode, with an RCA output impedance of only 500 and an XLR output impedance of only 100 , allowing it to be used with a wide range of input impedance for various power amplifiers. In addition, a full-featured remote control makes operation even easier.
- See more on Amazon...
Brand: Fanmusic | Manufacturer: TOPPING A70 Pro
See On Amazon #15
Topping D70 Pro OCTO DAC - 8X CS43198 Bluetooth 5.1 LDAC Aurora UI Colour Display RCA & XLR Output HiFi Decoder with Remote Control (Black)
Asin: B0CGCQC2QT | Model: D70 Pro OCTO-Black | PartNumber: D70 Pro OCTO-Black
👍 Plug And Play ▶️ Compatibility Is King, And The D70 Pro Octo Knows It. Use It Immediately On Windows 10, Windows 11, Mac, Linux, Ios/Android, And More. And For Windows Users Who Need Asio Applications, The Stable And Reliable Xmos Xu316 And Thesycon Custom Driver Make Setup A Breeze..
👍 Integrated Preamp With Independent Volume Memory ▶️ In Addition To Its Dac Prowess, The D70 Pro Octo Also Serves As An Integrated Preamp. Adjust Volume And Output Directly To Power Amplifiers Or Active Speakers. With Independent Volume Memory For Different Modes, You'll Always Return To Your Last-Used Volume Setting..
👍 Freely Switch Output Modes ▶️ Whether You Need Rca Single-Ended Output, Xlr Balanced Output, Or Both, The D70 Pro Octo Has You Covered. Freely Switch Between Output Modes To Adapt To Different Devices And Performance Needs. It's All About Giving You More Possibilities And Convenience..
👍 Aurora Ui Bring New Experience ▶️ The Full-Color Screen And Three Touch Buttons Of The D70 Pro Octo Introduce A Refreshing Ui Experience. Whether You're Toggling Playback Information, Fft, Or Vu, The Vibrant Colors Pull You In, Creating A Customizable Visual Delight..
Features
- 8-core driver for unmatched detail The D70 Pro OCTO is equipped with 8 Cirrus Logic flagship chips CS43198. The D70 Pro OCTO also supports up to PCM768kHz/32bit and DSD512 audio decoding, which letting you experience audio with unparalleled detail and fidelity. Even the subtlest nuances come alive, creating a listening experience that's true to the original recording.
- Aurora UI bring new experience The full-color screen and three touch buttons of the D70 Pro OCTO introduce a refreshing UI experience. Whether you're toggling playback information, FFT, or VU, the vibrant colors pull you in, creating a customizable visual delight.
- Plug and play Compatibility is king, and the D70 Pro OCTO knows it. Use it immediately on Windows 10, Windows 11, MAC, Linux, iOS/Android, and more. And for Windows users who need ASIO applications, the stable and reliable XMOS XU316 and Thesycon custom driver make setup a breeze.
- Freely switch output modes Whether you need RCA single-ended output, XLR balanced output, or both, the D70 Pro OCTO has you covered. Freely switch between output modes to adapt to different devices and performance needs. It's all about giving you more possibilities and convenience.
- Integrated preamp with independent volume memory In addition to its DAC prowess, the D70 Pro OCTO also serves as an integrated preamp. Adjust volume and output directly to power amplifiers or active speakers. With independent volume memory for different modes, you'll always return to your last-used volume setting.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
See On Amazon #16
Topping D10s HiFi USB DAC XU208 ES9038Q2M DSD256 32bit/384kHz USB Input Coaxial/Optical/RCA Output Mini Digital Audio Converters Desktop Portable Decoder(Black)
Asin: B08CTZ3CH8 | Model: D10s | PartNumber: D10s | Ean: 0708200238710 | UPC: 708200238710
♫ Audio Format Andsampling Rate Indicator: D10s Can Accurately Indicate The Audio Format(Pcm Or Dsd) And Sampling Rate Of The Playing Music. Orange Led Is Soft And Not Dazzling Even At Night..
♫ Op-Amp Rolling, D10s Has Op Amp Socket, Diyer Could Change The Op Amp To Get Different Sound. Any Question, Please Contact The After Service Team..
♫ Multiple Connections: D10s Could Connect With Your Active Speakers. It Could Connect To Power/Headphone Amp. If You Have A Better Dac , You Can Connect The Coaxial /Optical Output Of D10s To Your Dac , Then D10s Serves As A Usb Interface ..
♫ Automatic Power On/Off: Even Some Usb Port Support Power After Pc Has Shut Down, D10s Still Will Synchronously Power On /Off With Pc..
Features
- Upgraded version TOPPING D10s USB DAC: Customized Thesycon driver + XMOS XU208 + ES9038Q2M + OP.
- Automatic power on/off: Even some USB port support power after PC has shut down, D10s still will synchronously power on /off with PC.
- Audio format andsampling rate indicator: D10s can accurately indicate the audio format(PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night.
- Multiple connections: D10s could connect with your active speakers. It could connect to power/headphone amp. If you have a better DAC , you can connect the coaxial /optical output of D10s to your DAC , then D10s serves as a USB interface .
- OP-AMP Rolling, D10s has OP amp socket, Diyer could change the OP amp to get different sound. Any question, please contact the after service team.
- See more on Amazon...
Brand: AOSHIDA | Manufacturer: Dilvpoetry
Dimensions: 4.06 x 5.75 x 1.46 inches
See On Amazon #17
Topping DX9 DAC NFCA Headphone amp - AK4499EQ Flagship DAC, Hybrid Relay Volume Control, 6-Channel Discrete NFCA high-Performance (Black,15th Anniversary)
Asin: B0CL6FFLL7 | Model: DX9-Black | PartNumber: DX9-Black
𝐒𝐢𝐱-𝐜𝐡𝐚𝐧𝐧𝐞𝐥 𝐝𝐢𝐬𝐜𝐫𝐞𝐭𝐞 𝐍𝐅𝐂𝐀 (Nested Feedback Composite Amplifier) High-Performance Headphone Amplifier Module Packs A Punch. With 7000Mw Of Driving Force Per Channel And Distortion Levels Below 0.00009%, It's Got The Power And Finesse To Handle Even The Most Demanding Headphones With Ease..
The Dac And Headphone Amplifier Circuits In The Dx9 Are 𝐩𝐨𝐰𝐞𝐫𝐞𝐝 𝐢𝐧𝐝𝐞𝐩𝐞𝐧𝐝𝐞𝐧𝐭𝐥𝐲. This Ensures Clean, Unadulterated Sound By Providing Plenty Of Energy And Reducing Interference Between The Circuits..
𝐇𝐲𝐛𝐫𝐢𝐝 𝐫𝐞𝐥𝐚𝐲 𝐯𝐨𝐥𝐮𝐦𝐞 𝐜𝐨𝐧𝐭𝐫𝐨𝐥 The Hybrid Relay Volume Network In The Dx9 Is All About Precision.By Combining Resistor And Relay-Based Control, It Greatly Optimizes Snr (Signal-To-Noise Ratio) And Minimizes Noise At Low Volumes.This Gives You High-Precision Volume Control, Making Each Decibel Adjustment A Deliberate Choice, Not A Compromise..
Topping Dx9 Is Powered By The Rare And Legendary 𝐀𝐊𝟒𝟒𝟗𝟗𝐄𝐐 𝐃𝐀𝐂 𝐜𝐡𝐢𝐩, Boasting An Exceptional 132Db Dynamic Range And Less Than 0.00007% Harmonic Distortion. With Four Independent Channels, It Brings Unmatched Audio Fidelity And Clarity To Your Listening Sessions. This Dac Chip Is Like Having Two Flagship Ak4499ex Chips Working In Tandem, And When Paired With The Ak4118—Currently The Lowest Jitter S/Pdif Receiver—The Dx9 Offers Top-Tier Performance..
Features
- ' - , the TOPPING DX9 offers an impeccable audio environment. Eight-way digital inputs including AES, USB, Optical, Coax, and Bluetooth ensure that the DX9 can connect to a wide range of devices. With independent LINE OUT and preamplifier outputs, the DX9 makes flagship performance accessible to a multitude of setups.
- TOPPING DX9 is powered by the rare and legendary , boasting an exceptional 132dB dynamic range and less than 0.00007% harmonic distortion. With four independent channels, it brings unmatched audio fidelity and clarity to your listening sessions. This DAC chip is like having two flagship AK4499EX chips working in tandem, and when paired with the AK4118 currently the lowest jitter S/PDIF receiver the DX9 offers top-tier performance.
- - (Nested Feedback Composite Amplifier) high-performance headphone amplifier module packs a punch. With 7000mW of driving force per channel and distortion levels below 0.00009%, it's got the power and finesse to handle even the most demanding headphones with ease.
- The hybrid relay volume network in the DX9 is all about precision.By combining resistor and relay-based control, it greatly optimizes SNR (Signal-to-Noise Ratio) and minimizes noise at low volumes.This gives you high-precision volume control, making each decibel adjustment a deliberate choice, not a compromise.
- The DAC and headphone amplifier circuits in the DX9 are . This ensures clean, unadulterated sound by providing plenty of energy and reducing interference between the circuits.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Dimensions: 13.38 x 8.85 x 2.36 Inches
Warranty: 1 year manufacturer
See On Amazon #18
TOPPING L30II NFCA Linear Headphone Amp - 6.35mm Jack 3.5mm Adaptor RCA Input and Output 37Vpp high Output Voltage Mini HiFi Amp Audio Hi-Res Preamplifier (Sliver)
Asin: B0B7JKH2WH | Model: TOPPING-L30II-SLIVER-KGUSS | PartNumber: TOPPING-L30II-SLIVER-KGUSS
👍 Compatible With Almost All Kinds Of Headphones ▶️ L30 Ii's Output Has High Output Voltage,High Current,Low Output Impedance,So No Headphones That Can't Be Dealt With. High Output Voltage Can Easily Drive High Impedance Headphones; High Output Current Allows Low-Sensitivity Headphones To Obtain Enough Power; The Low Output Impedance Will Not Bring Unnecessary Effect On Fr When Driving Low-Impedance Headphones. Different Headphones Can Be Easily Driven By The L30 Ii..
👍 Best Combo For Active Speakers ▶️ We Also Recommend That L30ii And E30ii Be Used With Active Speakers. Connect The Two Outputs Of L30ii To Headphones And Active Speakers. By Switching The Outputs Of L30ii, You Can Enjoy Music On Headphones And Active Speakers Respectively.
👍 Three Gain Settings To Suit Different Needs ▶️ L30 Ii Has Three Gain Options:-14Db,0Db,16.5Db.Improved Gain Settings Can Cover A Wider Range Of Needs To Meet The Needs Of Different Headphones From Low-Sensitivity Full-Sized Over-Ears To High-Sensitivity Iems.With The Help Of Extremely Low Noise 0.3Uv,Even Iems Will Not Hear Any Background Noise..
👍 Sound Quality Is Never A Problem ▶️ With The Help Of Nfca, L30 Ii Easily Reach The Top Of The Industry,And It Has Almost Perfect Performance Regardless Of Distortion, Dynamic Range,And Multi-Tone Testing..
Features
- Improved NFCA TOPPING L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300 load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N.
- Sound quality is never a problem With the help of NFCA, L30 II easily reach the top of the industry,and it has almost perfect performance regardless of distortion, dynamic range,and multi-tone testing.
- Compatible with almost all kinds of headphones L30 II's output has high output voltage,high current,low output impedance,so no headphones that can't be dealt with. High output voltage can easily drive high impedance headphones; High output current allows low-sensitivity headphones to obtain enough power; The low output impedance will not bring unnecessary effect on FR when driving low-impedance headphones. Different headphones can be easily driven by the L30 II.
- Three gain settings to suit different needs L30 II has three gain options:-14dB,0dB,16.5dB.Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to high-sensitivity IEMs.With the help of extremely low noise 0.3uV,even IEMs will not hear any background noise.
- Best combo for active speakers We also recommend that L30II and E30II be used with active speakers. Connect the two outputs of L30II to headphones and active speakers. By switching the outputs of L30II, you can enjoy music on headphones and active speakers respectively
- See more on Amazon...
Brand: TOPPING | Manufacturer: TOPPING
See On Amazon #19
Topping E70 ES9028Pro Decoder Bluetooth 5.1 XU316 Support 32Bit/768kHz DSD512 RCA XLR Output with Remote Control DAC (20 * 13.8 * 4.4CM, Silver, 1)
Asin: B0BKGCHQ5Q | Model: E70 | PartNumber: E70
Excellent Performance: Thd+N Of E70 Is Already Lower Than 0.00006% (A-Weighted), The Music Restoration Is Accurate To Every Detail..
Newest Xmos Xu316 Support Dsd512&Pcm768khz: Usb Input Of E70 Has A Wide Range Of Compatibility: Windows 10, Windows 11, Mac, Linux, Los, Android Can Be Plug And Play. Only For Windows Asio Applications, You Need To Install The Driver And Set It Up. The Usb Hardware Is Based On Newest Xmos Xu316 And Thesycon Custom Driver (Applicable To Windows, Other Systems Are Free Of Driver), Which Is Stable And Reliable..
Ldac 24Bit96khz Bluetooth Transmission: E70 Has The Certification Of Hi-Res Audio Wireless And Ldac. It Uses Newest Qcc5125 Chipset To Support Ldaciaac/Sbc/Aptx/Aptx Ll Aptx Hd/Aptx Adaptive Protocol By Bluetooth 5.1. To Get Even Better Sound Quality From Bluetooth, We Abandon The Built-In Dac Of Qcc5125 And Connect It's Digital Signal To Es9028pro To Decode..
Brand New In Conversion: A Brand New In Conversion Circuit Is Designed For Better Quality Audio Reproduction. The Unique Circuit Design Provided Lower Distortion, Lower Noise While Occupying Less Space. The New Circuit Is Pushed Close To The Limit Of Physics So That We Are Able To Squeeze Out The Last Bit Of Performance Of The Dac Chip..
Features
- Super audio reproduction ability with ultra low distortion: The E70 uses ESS SABRE flagship DAC ES9028PRO. ES9028PRO has a 32-bit 8-channel HyperStream II architecture. In the application of E70, every 4 channels are connected in parallel as one channel, achieving high performance and high sound quality at the same time.
- Brand new IN conversion: A brand new IN conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion, lower noise while occupying less space. The new circuit is pushed close to the limit of physics SO that we are able to squeeze out the last bit of performance of the DAC chip.
- Excellent performance: THD+N of E70 is already lower than 0.00006% (A-weighted), the music restoration is accurate to every detail.
- LDAC 24bit96kHz Bluetooth transmission: E70 has the certification of Hi-Res Audio Wireless and LDAC. It uses newest QCC5125 chipset to support LDACIAAC/SBC/aptX/aptX LL aptX HD/aptX Adaptive protocol by Bluetooth 5.1. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect it's digital signal to ES9028PRO to decode.
- Newest XMOS XU316 support DSD512&PCM768kHz: USB input of E70 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, lOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on newest XMOS XU316 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable.
- See more on Amazon...
Brand: Fanmusic | Manufacturer: TOPPING
See On Amazon
Looking For Something Else?
Search