RATTMMOTOR - Buying Guide
Last Updated: 05/02/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
RATTMMOTOR CNC Probe Tool Setter Cnc Milling Z-Axis Tool Setting Touch Plate Probe Mach3 Router Milling Cnc Engraving Machine Auto-Check Instrument Setting Probe
Asin: B07FC56GYW | Ean: 0740229954141 | UPC: 740229954141
Milling Tools Cnc Z-Axis Tool Setting Touch Plate Probe Mach3 Router Mill.
Effective Surface Diameter: 30Mm..
Cnc Z Axis Router Mill Touch Plate Mach3 Tool Setting Probe New Milling Hot Kit..
Features
- CNC Router Mill: Z-Axis Tool Setting Touch Plate works w/ Mach3
- Cnc Z Axis Router Mill Touch Plate Mach3 Tool Setting Probe New Milling Hot Kit.
- Milling Tools CNC Z-Axis Tool Setting Touch Plate Probe Mach3 Router Mill
- Effective Surface Diameter: 30mm.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Shangdd
Weight: 0.10 pounds
See On Amazon #2
4pcs SBR20UU Aluminum Block 20mm Linear Motion Ball Bearing Slide Block Match for SBR20 20mm Linear Guide Rail
Asin: B073VGCDSQ | Model: SBR20 | PartNumber: SBR20 | Ean: 0785004503244 | UPC: 785004503244
100% Brand New And High Quality.
Smooth Moving,Low Friction,High Performance And Long Life.
Supports Performance Under High Load Or Long Stroke.
The External Material :Aluminum Alloy.
Features
- Cooperate with open linear bearing to ensure excellent sports performance
- The external material :Aluminum Alloy
- 100% Brand new and high quality
- Supports performance under high load or long stroke
- Smooth moving,low friction,high performance and long life
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Lishui
Dimensions: 0.00 x 0.94 x 0.00 inches | Weight: 1.65 Pounds
See On Amazon #3
RATTMMOTOR ZBX80 100mm Stroke CNC Linear Stage Motion Actuator X Y Z Axis Linear Slide Rail Aluminum Alloy Cross Sliding Table Linear Rail Guide SFU1605 Ballscrew+Nema23 57 Stepper Motor for CNC
Asin: B09MVYGLNQ | Model: ZXHT80-100 | PartNumber: ZXHT80-100
Total Length Of The Linear Motion Actuator Including The Stepper Motor : 330Mm; Total Length Of The Base Plate Without: 219Mm..
High Speed Slient, Smooth Running; Sfu1605 Ball Screw, Accuracy Up To 0.03..
Standard M5 Mounting Hole: M5 Movable Nuts Are Used On The Sides And Bottom To Make The Installation Of The Sliding Table More Flexible And Changeable..
Standard Motor: 57 Stepper Motor 1.8° 2.8A 1.26N.M; Screw: Ballscrew Drive 1605-Diameter 16 Pitch 5Mm..
Features
- Material: Aluminum Alloy; Effective Stroke: 100mm; Horizontally loadable: 80kg; Vertical carrying: 20kg; Width: 80mm.
- Standard motor: 57 stepper motor 1.8 2.8A 1.26N.m; Screw: Ballscrew drive 1605-diameter 16 pitch 5mm.
- Total length of the linear Motion Actuator including the stepper motor : 330mm; Total length of the base plate without: 219mm.
- Standard M5 mounting hole: M5 movable nuts are used on the sides and bottom to make the installation of the sliding table more flexible and changeable.
- High speed slient, smooth running; SFU1605 ball screw, accuracy up to 0.03.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #4
RATTMMOTOR 4 Axis CNC USB Mach3 Controller Breakout Board CNC Motion Controller Card Stepper Motor Driver with Cable for CNC Router Engraving Machine, Servo Motor, Stepper Motor
Asin: B07ZT7RGY9 | Ean: 0769135849686 | UPC: 769135849686
Signal Output:0-10V, It Can Control The Spindle Motor Speed Through Using Mach3 Software..
Recommends That Users Install The Emergency Stop Button And Make Sure The Button Is Functioning Properly..
If You Are Not Familiar With The Product And Software Features, Make Sure The Machine's Power Switch On Hand, You Can Quickly Turn Off The Power..
This Usb Motion Card Does Not Need Install Any Usb Driver, Windows2000/Xp/Windows7,Can Directly Identify (Notice: Doesn't Support Win8/Win10/Macos System !!!) ..
Features
- Model Name: Mach3 USB Motion Card; 4-axis linkage, Maximum step-pulse frequency: 100KHz, support connect four stepper motor drives or servo drives.
- This USB motion card does not need install any USB driver, Windows2000/XP/Windows7,can directly identify (Notice: Doesn't support Win8/win10/macOS system !!!) .
- Signal Output:0-10V, it can control the spindle motor speed through using mach3 software.
- If you are not familiar with the product and software features, make sure the machine's power switch on hand, you can quickly turn off the power.
- Recommends that users install the emergency stop button and make sure the button is functioning properly.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: JingDiao
See On Amazon #5
RATTMMOTOR 1.5KW VFD 110V Single to 3 Phase Inverter Variable Frequency Drive Spindle Motor Controller Converter 0-1000Hz + Extension Cable for CNC Router Milling Engraving Machine
Asin: B09WJV3PM7 | Model: RTM100-110V1.5 | PartNumber: RTM100-110V1.5
Input Phase: 1 Phase; Output Phase: 3 Phase..
Suitable For 0.8Kw Or 1.5Kw 110V Cnc Air-Cooled Water-Cooled Spindle Motor..
Input Frequency: 50-60 Hz; Output Frequency: 0-1000 Hz..
Features
- Input Voltage: 110V(+/-15%); Output Voltage: 110VAC.
- Input Frequency: 50-60 Hz; Output Frequency: 0-1000 Hz.
- Input Phase: 1 Phase; Output Phase: 3 Phase.
- Suitable for 0.8KW or 1.5KW 110V CNC air-cooled water-cooled spindle motor.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 5.91 x 0.00 x 4.65 inches
See On Amazon #6
RATTMMOTOR 4 Axis CNC Controller Stepper Motor Kit, Nema23 Stepper Motor 270oz-in 3A Dual Shaft with Brackets, TB6600 Stepper Motor Driver, CNC Motion Control Board Mach3 USB Card, 24V Power Supply
Asin: B09VKV26CW | Model: 4 Axis | PartNumber: 4 Axis
【Low Noise/High Torque Hybrid Stepper Motor】23Hs8430b 2-Phase Stepper Motor With Dual Shaft Diameter Of 8Mm, A Current Of 3A And An Angle Of 1.8°, Is Made Of Durable Metal On The Outside, And The Perfect Combination Of Rubber And Rotor Fills Up The Inner Space And Stabilizes The Overall Structure Of The Motor. The Coils Are Made Of Pure Copper Enameled Wire And The Torque Is Up To 270Oz-In (180N.Cm/18Kg-Cm). The Motor Runs Quietly And Doesn't Cause The Generator To Become Too Hot Over A Long Time..
【Stable Output 24V Dc Power Supply】Over-Current, Over-Voltage And Overload Protection, Power Supply Stable Power Supply, Electrical Energy Conversion Rate Of Up To 90%, Higher Efficiency. Together With The Heat Dissipation Fan Design, Shell Hollow Design, Heat Dissipation Ability Faster And Stronger, More Durable Performance..
【Usb Interface, Drive-Free Design 4-Axis Linkage Control Card】Output Pulse Frequency Of 100Khz, Using The Minimum Error Interpolation Algorithm, High Processing Accuracy. Supports Up To 4 Axes Of Linkage Control, Of Which The 4Th Axis Can Be Set As The Slave Axis. The Control Card Can Be Connected To Pc-Compatible Computers Such As Laptops, Desktops, Tablets And Other Computers With A Usb Interface. As Long As Mach3 Is Running, The Control Card Can Be Used Without Installing Any Drivers..
【Multi-Function Control Card】General-Purpose Opto-Couplers Isolation Input : Can Support The Limit Switch, Emergency Stop Switch, Auto Tool Zero, Home Switch And Electronic Handwheel; Have 0-10V Signal Output , You Can Use Mach3 Software To Control The Spindle Motor Speed; 4 General-Purpose Isolated Relay Drive Output Interface, Can Drive Four Relays For Controlling The Spindle Starts, Forward Rotating And Reverse Rotating, Pumps Or Other Device..
【Upgraded 4.5A Stepper Motor Driver】Using The Latest Tb6600 New Installation Chip, There Are Low-Voltage Shutdown, Thermal Over-Stop And Over-Current Circuit Protection, And Compared With The Tb6560 Increased Short-Circuit Protection. Tb6600 Driver Operating Voltage Of Dc 10-45Vdc, Support For Sub-Division Of The Whole Step, Half-Step, 1/4, 1/8, 1/16 Step, Up To 42/57/86 Two-Phase / Four-Phase / Four-Wire / Six-Wire Stepper Motors Within 4.2A. / Six-Wire Stepper Motor..
【Control Card And Tb6600 Driver Wiring (X-Axis As An Example) 】Driver's "Clk-" Connects To Control Card's Xp Pin , Driver's "Cw-" Connects To Control Card's Xd Pin , Driver's "5V" Connects To Control Card's 5V Pin.(The Usb Mach3 Control Card Can't Support Connection En- And En+)..
Features
- Motor and TB6600 Driver wiring Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
- Control Card and TB6600 Driver wiring (X-axis as an example) Driver's CLK- connects to control card's XP pin , Driver's CW- connects to control card's XD pin , Driver's 5V connects to control card's 5V pin.(The USB Mach3 control card can't support connection EN- and EN+).
- Low Noise/High Torque Hybrid Stepper Motor 23HS8430B 2-phase stepper motor with dual shaft diameter of 8mm, a current of 3A and an angle of 1.8 , is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
- Upgraded 4.5A Stepper Motor Driver Using the latest TB6600 new installation chip, there are low-voltage shutdown, thermal over-stop and over-current circuit protection, and compared with the TB6560 increased short-circuit protection. TB6600 driver operating voltage of DC 10-45VDC, support for sub-division of the whole step, half-step, 1/4, 1/8, 1/16 step, up to 42/57/86 two-phase / four-phase / four-wire / six-wire stepper motors within 4.2A. / six-wire stepper motor.
- USB Interface, Drive-free Design 4-Axis Linkage Control Card Output pulse frequency of 100KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.
- Multi-function control card General-purpose opto-couplers isolation input : can support the limit switch, emergency stop switch, auto tool zero, home switch and electronic handwheel; Have 0-10V signal output , you can use mach3 software to control the spindle motor speed; 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device.
- Stable output 24V DC power supply Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #7
RATTMMOTOR 2.2KW Water Cooled Spindle Kits 110V Spindle Motor 80mm 24000RPM+2.2KW VFD 110V Inverter 3HP Variable Frequency Drive+Spindle Mount+80W Water Pump+ER20 Collet for CNC Router Milling Machine
Asin: B0756WNP1J | Ean: 0785004503381 | UPC: 785004503381
【80Mm Spindle Motor Mount】Material Is Aluminum,Surface Sandblasted. Compared With The Aluminium Profile Fixture,The Accuracy Is Much Eavier, Much Higher, And It Is Hard To Deform. Fit For Cnc 80Mm Diameter Spindle Motor..
【How To Connect Spindle Motor And Vfd】The Spindle Motor's Aviation Plug Marked With Number 1, 2, 3, 4. Number 1, 2, 3 Port Are Connected Separately With Inverter's Port U, V, W. Number 4 Is The Ground Wire, No Wiring Is Required..
【80W 110V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also Suitable For 0.8Kw, 1.5Kw, 2.2Kw, 3Kw And Other High Speed Cnc Water Cooled Spindle Motor. Please Remind That The Submersible Pump Should Be Completely Immersed In Water When It Is Working To Ensure That The Submersible Pump Has A Certain Degree Of Cooling..
【2.2Kw Vfd Parameters】Control Model: Spwn. Power: 2.2Kw. Input：1 Or 3 Phase 110V 0-50Hz/60Hz. Output：3 Phase 110V 0-400Hz.Under Normal Circumstances, The Parameters Of The Inverter Have Been Set And Can Be Directly Connected For Use. (Or Please Follow The Instructions To Set The Parameters)..
Features
- 2.2KW Spindle Motor : This is a 110V-2.2KW water-cooled 15A 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
- 2.2KW VFD Parameters Control Model: SPWN. Power: 2.2KW. Input 1 or 3 phase 110V 0-50Hz/60Hz. Output 3 phase 110V 0-400Hz.Under normal circumstances, the parameters of the inverter have been set and can be directly connected for use. (Or please follow the instructions to set the parameters).
- 80mm Spindle Motor Mount Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
- 80W 110V Water Pump Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
- How to Connect Spindle Motor and VFD The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Chang Sheng
Dimensions: 3.15 x 0.01 x 0.00 inches | Weight: 23.19 pounds
See On Amazon #8
RATTMMOTOR Normally Closed Mach3 CNC Automatic Tool Sensor Gauge Changer CNC Z Axis Probe Tool Touch Sensor Setter Setting 4 Wires for CNC Router Engraver Machine
Asin: B07PRPMZKS | Model: xx. | PartNumber: xx. | Ean: 0769135849716, 0713721466467 | UPC: 713721466467, 769135849716
【Material】The Housing Material Of This Tool Setter Is Made Of 4S Grinding Grade Material. The Bottom Magnet Design Can Be Directly Connected To The Machine And Firmly Adsorbed To The Body. The Contact Material Is Made Of Super Hard Alloy, The Design Is Exquisite And The Installation Is Simple..
【Feature-2】The Tool Setter Will Send Out An Alarm Signal In Time When It Is Over-Travel To Avoid Other Troubles Caused By Equipment Operation. Moreover, The Tool Setter Has Strong Anti-Interference. The Protruding Sharp Corner Of The Tool Directly Touches The Tool Tip Related To The Machining Size, Detects Its Value And Size, And Outputs The Signal. It Has Higher Accuracy Than The Average Value Obtained By Converting The Amount Of Light And Electricity..
【Feature-1】This Tool Setting Instrument Is Designed With Dustproof And Waterproof Structure, Which Can Still Have Strong Durability Under The Condition Of Coolant And Iron Filings. It Does Not Need A Built-In Amplifier And Will Not Be Caused Deviations By The Location Temperature And Power Supply Voltage Fluctuations Of The Tool Setting Instrument, Which Can Be Directly Input To The Nc Program..
【Parameter】This Is A Normally Closed 4-Wire High-Precision Tool Setting Instrument With A Stroke Of 5Mm. The Positioning Accuracy Is 0.001Mm, The Contact Life Is Up To 3 Million Times, The Contact Force Is 1.5N, And The Contact Rating: Dc24v 20Ma..
Features
- Description The tool setting instrument is a special tool setting instrument for the engraving machine machining center machine. The output signal of the tool setting instrument is received by the numerical control system and then the tool length setting, tool wear detection and tool breakage are detected by the program control. In the case of no vibration and malfunction, the thermal deformation of the machine can be corrected according to the rated voltage and current and the specified speed.
- Parameter This is a normally closed 4-wire high-precision tool setting instrument with a stroke of 5mm. The positioning accuracy is 0.001mm, the contact life is up to 3 million times, the contact force is 1.5N, and the contact rating: DC24V 20mA.
- Material The housing material of this tool setter is made of 4S grinding grade material. The bottom magnet design can be directly connected to the machine and firmly adsorbed to the body. The contact material is made of super hard alloy, the design is exquisite and the installation is simple.
- Feature-1 This tool setting instrument is designed with dustproof and waterproof structure, which can still have strong durability under the condition of coolant and iron filings. It does not need a built-in amplifier and will not be caused deviations by the location temperature and power supply voltage fluctuations of the tool setting instrument, which can be directly input to the NC program.
- Feature-2 The tool setter will send out an alarm signal in time when it is over-travel to avoid other troubles caused by equipment operation. Moreover, the tool setter has strong anti-interference. The protruding sharp corner of the tool directly touches the tool tip related to the machining size, detects its value and size, and outputs the signal. It has higher accuracy than the average value obtained by converting the amount of light and electricity.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Weight: 0.10 Pounds
See On Amazon #9
RATTMMOTOR Normally Open Mach3 CNC Automatic Tool Sensor Gauge Changer CNC Z Axis Probe Tool Touch Sensor Setter Setting 4 Wires for CNC Router Engraver Machine
Asin: B08LK93NTC | Model: H:65 | PartNumber: H:65 | Ean: 0619191755172 | UPC: 619191755172
【Material】The Housing Material Of This Tool Setter Is Made Of 4S Grinding Grade Material. The Bottom Magnet Design Can Be Directly Connected To The Machine And Firmly Adsorbed To The Body. The Contact Material Is Made Of Super Hard Alloy, The Design Is Exquisite And The Installation Is Simple..
【Feature-2】The Tool Setter Will Send Out An Alarm Signal In Time When It Is Over-Travel To Avoid Other Troubles Caused By Equipment Operation. Moreover, The Tool Setter Has Strong Anti-Interference. The Protruding Sharp Corner Of The Tool Directly Touches The Tool Tip Related To The Machining Size, Detects Its Value And Size, And Outputs The Signal. It Has Higher Accuracy Than The Average Value Obtained By Converting The Amount Of Light And Electricity..
【Feature-1】This Tool Setting Instrument Is Designed With Dustproof And Waterproof Structure, Which Can Still Have Strong Durability Under The Condition Of Coolant And Iron Filings. It Does Not Need A Built-In Amplifier And Will Not Be Caused Deviations By The Location Temperature And Power Supply Voltage Fluctuations Of The Tool Setting Instrument, Which Can Be Directly Input To The Nc Program..
【Parameter】This Is A Normally Open 4-Wire High-Precision Tool Setting Instrument With A Stroke Of 5Mm. The Positioning Accuracy Is 0.001Mm, The Contact Life Is Up To 3 Million Times, The Contact Force Is 1.5N, And The Contact Rating: Dc24v 20Ma..
Features
- Description The tool setting instrument is a special tool setting instrument for the engraving machine machining center machine. The output signal of the tool setting instrument is received by the numerical control system and then the tool length setting, tool wear detection and tool breakage are detected by the program control. In the case of no vibration and malfunction, the thermal deformation of the machine can be corrected according to the rated voltage and current and the specified speed.
- Parameter This is a normally open 4-wire high-precision tool setting instrument with a stroke of 5mm. The positioning accuracy is 0.001mm, the contact life is up to 3 million times, the contact force is 1.5N, and the contact rating: DC24V 20mA.
- Material The housing material of this tool setter is made of 4S grinding grade material. The bottom magnet design can be directly connected to the machine and firmly adsorbed to the body. The contact material is made of super hard alloy, the design is exquisite and the installation is simple.
- Feature-1 This tool setting instrument is designed with dustproof and waterproof structure, which can still have strong durability under the condition of coolant and iron filings. It does not need a built-in amplifier and will not be caused deviations by the location temperature and power supply voltage fluctuations of the tool setting instrument, which can be directly input to the NC program.
- Feature-2 The tool setter will send out an alarm signal in time when it is over-travel to avoid other troubles caused by equipment operation. Moreover, the tool setter has strong anti-interference. The protruding sharp corner of the tool directly touches the tool tip related to the machining size, detects its value and size, and outputs the signal. It has higher accuracy than the average value obtained by converting the amount of light and electricity.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 4.33 x 5.91 x 2.76 inches | Weight: 0.99 pounds
See On Amazon #10
CNCTOPBAOS 3Pcs Nema23 Stepper Motor Mount 57 Stepping Motor Mounting Aluminium Alloy Bracket Clamp Holder Support Base for CNC Router Engraving Milling Machine Acessories (57x57x50mm)
Asin: B075YMCYXK | Model: B23 | PartNumber: B23 | Ean: 0785004502452 | UPC: 785004502452
Material:Aluminum Alloy.
Name:Nema23 57 Stepper Motor Bracket.
Standard Or Nonstandard:Standard.
Usage:Stepper Motor Bracket.
Features
- Fit:for Nema23 stepper motor
- Usage:Stepper Motor Bracket
- Material:Aluminum alloy
- Standard or Nonstandard:Standard
- Name:NEMA23 57 Stepper Motor bracket
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Dimensions: 1.97 x 2.24 x 2.24 inches
See On Amazon #11
RATTMMOTOR DC Brushless Spindle Motor Kit, 500W 48V Spindle Motor Air Cooled ER11, 12000RPM, 0.6N.m, 55MM+BLDC Driver Motor Speed Controller 600W Spindle Power Supply+Clamp Mount for CNC Router
Asin: B09X2Y63XQ | Model: 500WBLDC-4 | PartNumber: 500WBLDC-4
【Spindle Motor Drvier Parameters】Rated Voltage: 20-50Vdc; Rated Current: 10A; Limiting Current: 15A; Support Speed: Support Speed Above 20000Rpm, The Specific Speed Depends On The Motor Itself And The Load..
【Advantages-1】The Brush Is Removed, And There Is No Electric Spark Generated When The Brushed Motor Is Running, Which Greatly Reduces The Interference Of The Electric Spark To The Remote Control Radio Equipment..
【Dc Switching Power Supply Parameters】Input Voltage: 110V / 220V Ac; Current: 0-12.5A; Input Frequency: 50/60Hz; Power: 600W; Output Voltage: Dc 48V; Size; 215*115*50Mm..
【Spindle Motor Drvier Features】Compatible With Square Wave With And Without Hall, With Potentiometer Speed Regulation Function, External 10V Voltage Speed Regulation Function, Switch Function, Speed Output Function, Alarm Output Function, Forward And Reverse Function, Etc., And Has A Protective Shell..
Features
- Air Cooled Spindle Power: 500W; Voltage: 48VDC; Speed: 12000r/min; Torque 0.6NM; Diameter: 55mm.Radial runout off :about 0.01-0.03mm;Insulation resistance: > 2 megohms; Dielectric strength of insulation: 400V.
- Spindle Motor Drvier Features Compatible with square wave with and without Hall, with potentiometer speed regulation function, external 10V voltage speed regulation function, switch function, speed output function, alarm output function, forward and reverse function, etc., and has a protective shell.
- Spindle Motor Drvier Parameters Rated voltage: 20-50VDC; Rated current: 10A; Limiting current: 15A; Support speed: support speed above 20000RPM, the specific speed depends on the motor itself and the load.
- DC Switching Power Supply Parameters Input voltage: 110V / 220V AC; Current: 0-12.5A; Input frequency: 50/60Hz; Power: 600W; output Voltage: DC 48V; Size; 215*115*50mm.
- Advantages-1 The brush is removed, and there is no electric spark generated when the brushed motor is running, which greatly reduces the interference of the electric spark to the remote control radio equipment.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 22.83 x 74.80 x 22.44 Inches | Weight: 5.95 pounds
See On Amazon #12
RATTMMOTOR CNC Spindle Motor Kit 220V, 2.2KW Air Cooled Spindle Motor Square Spindle Motor ER20+2.2KW VFD Inverter 220V Variable Frequency Drive Single to 3 Phase Converter for CNC Router Machine
Asin: B09NVW8ZN6 | Model: CFFK-2.2RTM | PartNumber: CFFK-2.2RTM
【2.2Kw Vfd】①Parameters: Input Voltage: 220V(+/-15%), Output Voltage: 220Vac, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 Phase, Output Phase: 3 Phase, Current: 11A. It Provide A Variety Of Fault Protection Functions: Over-Current, Over-Voltage, Under-Voltage, Over-Heat, Overload, Lack Of Equal Real-Time Monitoring And Protection To Ensure Safe Operation..
【How To Connect Spindle Motor And Vfd】The Spindle Motor's Aviation Plug Marked With Number U, V, W. Number U, V, W Port Are Connected With Inverter's Port U, V, W Respectively..
②Other Fuctions: With Over Torque And Under Torque Detection; With Jump Frequency Control Function, It Can Effectively Suppress Mechanical Resonance And Make The System More Stable And Reliable.It Can Also Avoid The Impact Of Production Due To Instantaneous Power Failure Because Of Instantaneous Power-Down Retention Function. What's More, It Supports Multiple Frequency Settings: Digital Setting, Analog Setting, Pid Setting, Rs485 Communication Setting,Ect..
【2.2Kw Spindle Motor】: ①This Is A 220V-2.2Kw Air-Cooled 6A Spindle Motor Come With A Er20 Nut And Collet. Frequency Is 400Hz, Precision Tapered Bore Is Less Than 0.005Mm And Runout Off Is Less Than 0.01Mm. ②Speed Of The Spindle Motor : 0-24000Rpm. Because It Is A High-Speed Spindle Motor, The Spindle Speed Must Not Be Lower Than 9000 Rpm During The Use Of The Spindle. It Should Be Noted That The Main Shaft Cannot Only Rotate Clockwise Or Counter-Clockwise..
Features
- Package Include : 1 x 2.2KW Square Air Cooled Spindle Motor 1 x 2.2KW VFD with cable 1 x ER20 Wrench
- 2.2KW Spindle Motor : This is a 220V-2.2KW air-cooled 6A spindle motor come with a ER20 nut and collet. Frequency is 400HZ, precision tapered bore is less than 0.005mm and runout off is Less than 0.01mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the main shaft cannot only rotate clockwise or counter-clockwise.
- 2.2KW VFD Parameters: Input Voltage: 220V(+/-15%), Output Voltage: 220VAC, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 phase, Output Phase: 3 phase, Current: 11A. It provide a variety of fault protection functions: over-current, over-voltage, under-voltage, over-heat, overload, lack of equal real-time monitoring and protection to ensure safe operation.
- Other Fuctions: With over torque and under torque detection; With jump frequency control function, it can effectively suppress mechanical resonance and make the system more stable and reliable.It can also avoid the impact of production due to instantaneous power failure because of instantaneous power-down retention function. What's more, it supports multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting,ect.
- How to Connect Spindle Motor and VFD The spindle motor's aviation plug marked with number U, V, W. Number U, V, W port are connected with inverter's port U, V, W respectively.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 10.55 x 4.45 inches | Weight: 10.80 Pounds
Warranty: 1 year warranty
See On Amazon #13
RATTMMOTOR CNC Spindle Motor 220V 3KW Water Cooled Spindle Motor 24000RPM 12A ER20 Spindle 4-Bearings 100mm Spindle Motor 400HZ 3-Phase for CNC Router Engraver Milling Machine
Asin: B09KKY1TGB | Model: GDZ100-3.0 | PartNumber: GDZ100-3.0
✅【Speed Of The Spindle Motor】0-24000Rpm. Because It Is A High-Speed Spindle Motor, The Spindle Speed Must Not Be Lower Than 9000 Rpm During The Use Of The Spindle. It Should Be Noted That The Spindle Only Can Rotate Clockwise But Not Counterclockwise..
✅【About The Design Dvantages Of The Spindle Motor】The Design Of The Dust-Proof Cover On The Front Of The Spindle And The Use Of Stainless Steel Body Can Effectively Prevent Dust, Water And Rust..
✅【Advantages】4Pcs P4 High Speed Bearings, Dynamic Balance, High-Precison Nut And Chuck, It Can Better Ensure The Accuracy Of The Spindle. It's Not Easy To Oxidize And Rust With The Water-Cooling Design, And Pure Copper Galvanized Nozzle..
✅【Simple Introduction】This Is A 220V 3Kw Water-Cooled 12A Φ 100X220mm Spindle Motor Come With A Er20 Nut And Collet. Frequency Is 400Hz, 0.01Mm Precision Tapered Bore And Runout Off Is Less Than 0.01Mm. It Is Mainly Suitable For Non-Metallic Engraving,Such As Wood Carving/Engraving Machine, Advertisement Engraving Machine,Cnc Machine..
Features
- How to Wire The Spindle Motor The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected with inverter's port U, V, W respectively. Number 4 does not require wiring.
- Simple Introduction This is a 220V 3KW water-cooled 12A 100x220mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.01mm precision tapered bore and runout off is less than 0.01mm. It is mainly suitable for non-metallic engraving,such as wood carving/engraving machine, advertisement engraving machine,CNC machine.
- Speed of The Spindle Motor 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle only can rotate clockwise but not counterclockwise.
- Advantages 4pcs P4 high speed bearings, dynamic balance, high-precison nut and chuck, it can better ensure the accuracy of the spindle. It's not easy to oxidize and rust with the water-cooling design, and pure copper galvanized nozzle.
- About The Design dvantages of The Spindle Motor The design of the dust-proof cover on the front of the spindle and the use of stainless steel body can effectively prevent dust, water and rust.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Changsheng
Dimensions: 0.00 x 0.01 x 39.37 inches | Weight: 18.74 pounds
Warranty: 1 year warranty
See On Amazon #14
RATTMMOTOR CNC 1610 PRO CNC Wood Router Machine Kit, 3 Axis GRBL Control DIY Mini CNC Milling Engraver Engraving Machine with CNC Offline Controller for Plastic/Wood/Acrylic/PVC/PCB/Wood
Asin: B08HRLGL6C | Model: 1610PRO-1 | PartNumber: 1610PRO-1 | Ean: 0619191721443 | UPC: 619191721443
【Applicable Engraving Material】Cnc 1610 Pro Machine Can Not Only Engraving Wood/Plastic/Acrylic/ Pvc/Pcb/Carbon Fiber/Density Board And So On, But Also Soft Metal Like Copper, Aluminum And The Similar Materials. Howerever, Harder Materials Cannot Be Engraved Such As Glass, Hard Metal, Jade, Ect..
【Cnc Offline Controller】This Machine Can Be Controlled Simply By The Offline Controller Without Connecting It To A Computer. Support Sd Card And Tf Card At The Same Time, Standard Capacity 1G. After Inserting The File Into The Sd Card,The Engraving File Can Be Directly Identified..
【Grbl Control Board/Software】This Machine Can Be Controlled By Grblcontrol/Candle Software After Connecting The Control Board To A Coumpter Via Usb Port. The Control Board Is Equipped With A Fan To Force Heat Dissipation, Also Has More Fuctions Such As Support Spindle Pwm Speed, Limit Switch, Tool Setting, Steering Gear..
【Simple Assembly】This Mini Cnc Router Machine Kit Is Mainly Designed For Diy Carving Enthusiasts/Beginners, Easily Assembled And Opertated, Coming With A Paper Manual And Usb Flash Drive Of All The Files..
Features
- Upgrade Version CNC 1610 PRO Frame size: 30x26x25CM. Working area:18x10x4.5CM. Material: Aluminum Alloy. Spindle: 775 spindle motor (12-24V) 24V:10000r/min. Stepper motor: 42 stepper motor, 12V, phase current 1.3A, phase resistance 2.1 ohms, torque 0.25N.m
- Simple Assembly This mini cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and USB flash drive of all the files.
- Applicable Engraving Material CNC 1610 PRO machine can not only engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and so on, but also soft metal like copper, aluminum and the similar materials. Howerever, harder materials cannot be engraved such as glass, hard metal, jade, ect.
- GRBL Control Board/Software This machine can be controlled by Grblcontrol/Candle software after connecting the control board to a coumpter via USB port. The control board is equipped with a fan to force heat dissipation, also has more fuctions such as support spindle PWM speed, limit switch, tool setting, steering gear.
- CNC Offline Controller This machine can be controlled simply by the offline controller without connecting it to a computer. Support SD card and TF card at the same time, standard capacity 1G. After inserting the file into the SD card,the engraving file can be directly identified.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 11.81 x 10.24 x 0.01 inches
See On Amazon #15
RATTMMOTOR 500W CNC Air Cooled Spindle Motor ER11 12000RPM + Input Voltage AC110V-220V Speed Controller with Power Supply + 52mm Clamp for CNC Router Milling Machine
Asin: B07ZHFV4N5 | Ean: 0769135311916 | UPC: 769135311916
Adopt Pulse Width Technology To Make The Speed More Stable, And The Speed Is High Under Low Speed..
Note: This Motor Has Quiet Operation, Small Volume And High Speed, And The Rear End Of The Motor Is Reinforced With A Cooling Fan, Which Can Be Safely Worked For A Long Time!.
With Overcurrent Protection Cut-Off Device To Make Performance More Reliable; With A Soft Start Device To Eliminate Motor Starting Current Is Too Large..
Speed Controller-- Armature Output Voltage: Dc0 ~ 100V Adjustable; Input Voltage: Ac100-Ac220v±10% Global Voltage 50/60Hz(User Can Change The Power Supply To 110V According To Their Needs); Current Limit: 6A; Wiring: Terminal Type (Convenient And Fast)..
Features
- Air Cooled Spindle-- Power: 500W; Idling Speed: 2000-12000r/min; Torque 0.5NM; Diameter: 52mm.
- Speed Controller-- Armature output voltage: DC0 ~ 100V adjustable; Input Voltage: AC100-AC220V 10% Global voltage 50/60Hz(User can change the power supply to 110V according to their needs); Current Limit: 6A; Wiring: Terminal type (Convenient and fast).
- Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
- With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
- Note: This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 2.20 x 7.83 Inches | Weight: 3.68 pounds
See On Amazon #16
RATTMMOTOR Upgrade CNC Router Mini Vise Clamp, High-Precision DIY Engraver Machine Hold Down Clamp Mini Right Angle Vise, Working Range 65mm for DIY Mini CNC Router Milling Engraving Machine
Asin: B0BGP7YSVK | Model: M-65 | PartNumber: M-65
The Quality Is Too Hard, And The Quenching Treatment Can Speed Up The Fastening Of The Workpiece Body, The Screw Rod And The Like..
Material: Aluminum, Clamp Range: 65 Mm, Size: 157 * 30 * 42 (Length * Height * Width)..
It Is Suitable For Machine Tools Such As Surface Grinder, Milling Machine, Edm And Wire Cutting..
Exquisite Appearance, At Work, Whether It Is Horizontal Force Or Standing, Flat To Maintain A High Degree Of Precision..
Features
- High tightness and unique structure allow the workpiece to be strongly clamped with a vertical parallelism of 0.005MM.
- Exquisite appearance, at work, whether it is horizontal force or standing, flat to maintain a high degree of precision.
- The quality is too hard, and the quenching treatment can speed up the fastening of the workpiece body, the screw rod and the like.
- It is suitable for machine tools such as surface grinder, milling machine, EDM and wire cutting.
- Material: Aluminum, clamp range: 65 mm, size: 157 * 30 * 42 (length * height * width).
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Weight: 0.62 Pounds
See On Amazon #17
RATTMMOTOR 3D Printer CNC Controller Kit Compatible with Arduino IDE, Nema17 Stepper Motor+UNO R3 Improvement Borad+CNC GRBL Shield Board V3 Expansion Board+DRV8825 Drivers+Mechanical Switches
Asin: B08KXL4GH7 | Model: 3D-4401J | PartNumber: 3D-4401J | Ean: 0619191755295, 0754193620124 | UPC: 754193620124, 619191755295
【Cnc Shield Board V3 Expansion Board】This Expansion Board Can Be Used As A Drive Expansion Board For Engraving Machines, 3D Printers, Etc..
【Mechanical Switches With 3-Pin Cable】Under Normal Circumstances, The System Needs To Be Equipped With At Least 3 Mechanical Switches;Easy To Install, More Common Styles..
【Drv8825 Stepper Motor Driver】Six Different Stepping Modes: Full, Half, 1/4, 1/8, 1/16, 1/32; The Adjustable Potentiometer Can Adjust The Maximum Current Output, So As To Obtain A Higher Step Rate..
【Uno R3 Improvement Borad】 Uno Is A Simple I/O Platform Based On Open Source Code, And Has A Processing/Wiring Development Environment Similar To Java And C Language, Which Is Easy To Understand, Allowing You To Quickly Use Unc To Make Interesting Things.
Features
- Nema17 Stepper Motor Step angle: 1.8deg; Rated current: 1.7A; Holding torque: 0.45Nm (64 oz.in) ; Size: 40mm; Phase: 2; 1.8 5% step angle (200 steps / rotation)
- UNO R3 Improvement Borad UNO is a Simple I/O platform based on open source code, and has a Processing/Wiring development environment similar to Java and C language, which is easy to understand, allowing you to quickly use UNC to make interesting things
- CNC Shield Board V3 Expansion Board This expansion board can be used as a drive expansion board for engraving machines, 3D printers, etc.
- DRV8825 Stepper Motor Driver Six different stepping modes: full, half, 1/4, 1/8, 1/16, 1/32; The adjustable potentiometer can adjust the maximum current output, so as to obtain a higher step rate.
- Mechanical Switches with 3-pin Cable Under normal circumstances, the system needs to be equipped with at least 3 mechanical switches;easy to install, more common styles.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #18
CNCTOPBAOS Nema34 12N.m Closed Loop Hybrid Servo Motor Stepper Motor 12nm 1700oz-in 156mm 6A 2 Phase & HSS86 Servo Driver & 3m Wire CNC Controller Kit for CNC Router Engraving Milling Machine
Asin: B07411XP67 | Ean: 0785004502223 | UPC: 785004502223
♞【Advantages】Stepper Motor Closed Loop System,Never Lose Step; The Stepper Motor Control Has A New Generation Of 32-Bit Dsp. The Vector Control Technology Can Ensure The Accuracy Of The Motor; Improve Motor Output Torque And Working Speed; Automatic Current Adjustment Based On Load; Pulses Response Frequency Can Reach 200Khz; 16 Kinds Microsteps Choice,Highest 51200Microsteps/Rev..
♞【Widely Used】Closed Loop Stepper System Can Be Applied To All Kinds Small Automatic Equipment And Instrument. Such As Engraving Machine, Special Industrial Sewing Machine, Stripping Machine, Marking Machine, Cutting Machine, Graph Plotter, Cnc Machine, Automatic Assembly Equipment And So On.This Motor Driver Kit Fits All Types Of Machine Load Conditions (Including Pulley And Low Stiffness Pulley) Without Adjusting The Gain Parameters..
♞【More Functions】It Supports Over-Current Protection, Over-Voltage Protection, Position Outside The Tolerance Protection.The Build-In Place In Position And Alarm Output Signal Can Help The Upper Monitor To Monitor And Control,The Function Of Position Ultra Difference Alarm Can Ensure The Machine Work Safely..
♞【2Hss86 Driver】2-Phase Hybrid Stepper Servo Driver; Frequency:0-200Khz; Insulation Resistance:>=500Mω; Voltage: Ac 24-70V Or Dc 30-100V Input;.
Features
- Motor specifications Holding Torque:12N.m; Current:6A; Peak current:8.0A; Phase:2; Size:86x86x156mm; Step Angle(degrees):1.8 degree; Motor Lead Wire: 4-wire; Encoder lines:1000
- 2HSS86 Driver 2-Phase Hybrid Stepper Servo Driver; Frequency:0-200KHz; Insulation resistance:>=500M ; Voltage: AC 24-70V or DC 30-100V input;
- Advantages Stepper motor closed loop system,never lose step; The stepper motor control has a new generation of 32-bit DSP. The vector control technology can ensure the accuracy of the motor; Improve motor output torque and working speed; Automatic current adjustment based on load; Pulses response frequency can reach 200KHZ; 16 kinds microsteps choice,highest 51200microsteps/rev.
- More Functions It supports over-current protection, over-voltage protection, position outside the tolerance protection.The build-in place in position and alarm output signal can help the upper monitor to monitor and control,the function of position ultra difference alarm can ensure the machine work safely.
- Widely used Closed loop stepper system can be applied to all kinds small automatic equipment and instrument. Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so on.This motor driver kit fits all types of machine load conditions (including pulley and low stiffness pulley) without adjusting the gain parameters.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Weight: 14.20 pounds
See On Amazon #19
RATTMMOTOR 2.2KW Spindle Motor 220V Square Air Cooled Spindle Motor ER20, 24000RPM High Speed Spindle Motor 4 Bearings 3-Phase 6A 400Hz for CNC Router Engraver Milling Cutting Machine
Asin: B0711XKJD1 | Ean: 0785004503053 | UPC: 785004503053
【How To Wring It To Inverter】The Spindle’S Terminal U1, V1, W1 Are Connected Separately To Inverter’S Terminal U, V,W. Connect Any 2Pin Terminal "R", "S" Or "T" Of The Inverter To "220Vac"..
【Main Application】Wood, Aluminum, Glass, Pvc Industry.The Spindle Motor Is Mainly Suitable For Non-Metallic Engraving..
【Note】Before Driving, Turn The Shaft By Hand First. The Temperature's Rise Caused By The High-Speed Rotation Of The Spindle Motor Can Be Eliminated By The Coolant Circulation System..
【Spindle Speed】The Speed Of The Spindle Motor Is 0-24000Rpm. Because It Is A High-Speed Spindle Motor, The Spindle Speed Must Not Be Lowered Than 9000 Rpm During The Use Of The Spindle. Also ,It Should Be Noted That The Spindle Only Can Rotate Clockwise But Not Counter-Clockwise..
Features
- Simple discreption This is a 220V 2.2KW Square air-cooled spindle motor come with a ER20 nut and collet. Current is 6A, frequency is 400HZ, precision tapered bore is less than 0.005mm and runout off is Less than 0.01mm.
- Spindle speed The speed of the spindle motor is 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lowered than 9000 rpm during the use of the spindle. Also ,it should be noted that the spindle only can rotate clockwise but not counter-clockwise.
- How to wring it to Inverter The spindle s terminal U1, V1, W1 are connected separately to inverter s terminal U, V,W. Connect any 2pin terminal R, S or T of the inverter to 220VAC.
- Note Before driving, turn the shaft by hand first. The temperature's rise caused by the high-speed rotation of the spindle motor can be eliminated by the coolant circulation system.
- Main application Wood, Aluminum, Glass, PVC industry.The Spindle motor is mainly suitable for NON-metallic engraving.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: ChangSheng
Weight: 5.20 pounds
See On Amazon #20
RATTMMOTOR CNC Controller Kit CNC GRBL Shield Board V3 Expansion Board with 4pcs DRV8825 Stepper Motor Driver with Heatsink Compatible with Arduino IDE Sutitable for CNC Router Machine, 3D Printer
Asin: B09XK48QKV | Model: V3-DRV8825 | PartNumber: V3-DRV8825
【Cnc Shield V3 Expansion Board Feature2】That Is To Say, 6Pcs Io Port Can Manage 3 Stepping Motors Well, Which Is Very Convenient To Use, Bid Farewell To The Cumbersome Operation Of Traditional Stepping Motors..
【Drv8825 Stepper Motor Driver Feature2】Drv8825 Has Adjustable Current Limit, Overcurrent And Thermal Protection, 6 Micro Resolutions (1, 1/2, 1/4, 1/8, 1/16, 1/32). It Uses 8.2-45V And Can Provide Up To About 1.5 Per Phase Or Forced Air Flow (Rated Up To 2.2 Per Roll With Sufficient Additional Cooling)..
【Drv8825 Stepper Motor Driver Feature1】The Drv8825 Stepper Motor Driver Module Has A Pinout That Is Almost Identical To The Interface And The A4988 Stepper Motor Carrier, So It Can Be Used As A Higher Performance Replacement In Many Applications..
【Cnc Shield V3 Expansion Board Feature1】There Are A Total Of 4 Slots For Stepper Motor Drive Modules, Which Can Drive 4 Routes Without Motors, And Each Stepper Motor Only Needs 2Pcs Io Port..
Features
- Main Application This expansion board and DRV8825 Stepper Motor Driver can be used as a drive expansion board for engraving machines, 3D printers, etc.
- CNC Shield V3 Expansion Board Feature1 There are a total of 4 slots for stepper motor drive modules, which can drive 4 routes without motors, and each stepper motor only needs 2pcs IO port.
- CNC Shield V3 Expansion Board Feature2 That is to say, 6pcs IO port can manage 3 stepping motors well, which is very convenient to use, bid farewell to the cumbersome operation of traditional stepping motors.
- DRV8825 Stepper Motor Driver Feature1 The DRV8825 stepper motor driver module has a pinout that is almost identical to the interface and the A4988 stepper motor carrier, so it can be used as a higher performance replacement in many applications.
- DRV8825 Stepper Motor Driver Feature2 DRV8825 has adjustable current limit, overcurrent and thermal protection, 6 micro resolutions (1, 1/2, 1/4, 1/8, 1/16, 1/32). It uses 8.2-45V and can provide Up to about 1.5 per phase or forced air flow (rated up to 2.2 per roll with sufficient additional cooling).
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #21
RATTMMOTOR ER11 Spindle Motor 300W Air-Cooled Spindle Motor 52mm 12-48VDC 12000RPM 400mN.m for DIY CNC Router Engraver Milling Machine
Asin: B08GKK77W8 | Model: RTMER11 | PartNumber: RTMER11 | Ean: 0619191721023 | UPC: 619191721023
Speed: Idling Speed Can Reach 12000Rpm.
Applications: Can Be Used For Engraving Wood/Plastic/Acrylic/ Pvc/Pcb/Carbon Fiber/Density Board And Other Materials..
Frequency: 0-400Hz； Torque: 400Mn.M.
Diameter: 52Mm; Total Length Of Motor:175Mm.
Features
- Power: 300W; Operating Voltage: 12-48VDC
- Diameter: 52mm; Total length of motor:175mm
- Speed: Idling speed can reach 12000RPM
- Frequency: 0-400Hz Torque: 400mN.m
- Applications: Can be used for engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and other materials.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 2.05 x 0.01 x 0.00 inches
See On Amazon #22
RATTMMOTOR 3PCS Nema23 23HS2430B Dual Shaft 57mm 57mm 112mm Stepper Motor 425oz-in 1.8 3A 4 Lead Wire for CNC Router Milling Engraving Machine
Asin: B0C4GX6DHH | Model: 23HS2430B-3P | PartNumber: 23HS2430B-3P | Ean: 0754193411715 | UPC: 754193411715
【Advanced Technology】The Motor Coils Are Made Of Pure Copper Enamelled Coils, Built By Advanced Winding Technology, With Evenly Distributed Copper Wires, Not Easy To Get Hot Or Burn, Lower Temperature Rise Of The Motor, No Deformation And Noise For A Long Time..
【Low Noise 】The Stepper Motor Is Housed In A High Strength Metal Casing, Which Is Robust And Durable, With Frosted Metal Side Walls For Increased Friction..
【High Torque 】High Quality Motor Steel, Low Self-Induced Reactance In The Bearings, Good Responsiveness, Direct Linkage To The Load At Low Speeds At Near Blocked Speeds, Without Gear Reduction..
【Excellent Performance】It Has High Torque, The Stepper Motor's Power Is 15%-20% Higher Than Conventional Motors. The Circuit Board Inside The Bipolar Motor Has Been Updated To Ensure The Stability Of The Motor Structure And Achieve The Best Uniform Rotation..
Features
- 23HS2430B Motor Parameter Phase: 2 Phase; Step Angle: 1.8 degree; Frame Size: 57 x 57 x 112 mm; Shaft Diameter: 8mm; Holding Torque: 2.8Nm (425oz.in); Phase Resistance: 1.6ohms; Rated Current/phase: 3A; Inductance: 6.8mH+/-20%(1KHz).
- Excellent Performance It has high torque, the stepper motor's power is 15%-20% higher than conventional motors. The circuit board inside the bipolar motor has been updated to ensure the stability of the motor structure and achieve the best uniform rotation.
- Advanced Technology The motor coils are made of pure copper enamelled coils, built by advanced winding technology, with evenly distributed copper wires, not easy to get hot or burn, lower temperature rise of the motor, no deformation and noise for a long time.
- High Torque High quality motor steel, low self-induced reactance in the bearings, good responsiveness, direct linkage to the load at low speeds at near blocked speeds, without gear reduction.
- Low Noise The stepper motor is housed in a high strength metal casing, which is robust and durable, with frosted metal side walls for increased friction.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #23
RATTMMOTOR DMA860S Stepper Motor Driver MAX 8.2A CNC Digital Stepper Motor Controller 128 Subdivision, Drive 4,6,8-Wire 2-Phase Stepper Motor for CNC Router Engraving Machine
Asin: B0C4H7BJCY | Ean: 0754193411678 | UPC: 754193411678
【16 Selectable Micro-Step Resolutions】The Optional Values Of Micro-Step Resolutions Are 400, 800, 1000, 1600, 2000, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 20000, 25600, 40000, 51200..
【High Reliability】High Reliability Using Multi-Layer Boards And Surface Mount Packaging, Leaving Enough Margin For Power Devices..
【Applications】Suitable For All Kinds Of Small And Medium-Sized Automation Equipment And Instruments,Such As: Lithium Battery Equipment, 3C Electronic Equipment, Engraving Machine, Marking Machine,Cutting Machine, Lasrr Phototypesetting, Engraving Machine,Plotter, Cnc Machine Tool,Automatic Assembly Equipment,Etc..
【Characteristics】Power Supply Range: Ac18v—110V. Dc18v—160V; Optically Isolated Differential Signal Input, The Maximum Input Pulse Frequency Is 300Khz; The Pulse, Direction And Enable Terminals Have Constant Current Input Function, Which Can Be Directly Connected To The Input Signal, Instead Of Adding A Series Resistor For Step-Down Current-Limiting Protection..
【16 Selectable Current】The Optional Values Of Current Parameters Are 2.2A, 2.6A, 3.0A, 3.4A, 3.8A, 4.2A, 4.6A, 5.0A, 5.4A, 5.8A, 6.2A, 6.6A, 7.0A, 7.4A, 7.8A, 8.2A. ( The Current Is Halved After The Is Is Stationary ).
【Product Introduction ②】The Dma860s Driver Can Select The Current And Subdivision Through The Dip Switch. There Are 16 Subdivisions And 16 Current For Selection. It Has Overvoltage, Undervoltage, Phase Current And Total Current Overcurrent Protection. The Input And Output Control Signal All Use Photoelectric Isolation..
Features
- Product Introduction DMA860S 2 phase stepper motor driver is a cost-effective subdivision driver designed based on PI control algorithm. It has excellent performance, high speed and high torque output, low noise, low vibration, and low heat.
- Product Introduction The DMA860S driver can select the current and subdivision through the DIP switch. There are 16 subdivisions and 16 current for selection. It has overvoltage, undervoltage, phase current and total current overcurrent protection. The input and output control signal all use photoelectric isolation.
- 16 Selectable micro-step resolutions The optional values of micro-step resolutions are 400, 800, 1000, 1600, 2000, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 20000, 25600, 40000, 51200.
- 16 Selectable current The optional values of current parameters are 2.2A, 2.6A, 3.0A, 3.4A, 3.8A, 4.2A, 4.6A, 5.0A, 5.4A, 5.8A, 6.2A, 6.6A, 7.0A, 7.4A, 7.8A, 8.2A. ( The current is halved after the IS is stationary )
- Applications Suitable for all kinds of small and medium-sized automation equipment and instruments,such as: lithium battery equipment, 3C electronic equipment, engraving machine, marking machine,cutting machine, lasrr phototypesetting, engraving machine,plotter, CNC machine tool,automatic assembly equipment,etc.
- Characteristics Power supply range: AC18V 110V. DC18V 160V; Optically isolated differential signal input, the maximum input pulse frequency is 300KHz; The pulse, direction and enable terminals have constant current input function, which can be directly connected to the input signal, Instead of adding a series resistor for step-down current-limiting protection.
- High reliability High reliability using multi-layer boards and surface mount packaging, leaving enough margin for power devices.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #24
RATTMMOTOR Variable Frequency Drive 2.2KW 110V VFD Drive Inverter Frequency Converter Single Phase Input, 3 Phase Output for VFD Water-cooled Air-cooled Spindle Motor Speed Control+VFD Extension Cable
Asin: B078KV3XX2 | Ean: 0654615632738 | UPC: 654615632738
【Input/Output Terminals】- 6 Multi-Function Input Terminals Can Implement 8 Speed Control, Program Operation, 4 Segment Reduction Switching, Up/Down Functions, Counter, External Emergency Stop Function. There Are 5 Multi-Function Output Terminals For Displaying Running, Zero Speed, Counter, External Abnormity, Program Operation And Other Information And Warnings..
【Installation/Use Environment】In Order To Make The Cooling Effect, The Frequency Converter Must Be Installed Vertically And Ensure That The Air Is Flowing Smoothly. Before Installing And Using The Product, Please Read The Instruction Manual (Included In The Package) Of The Inverter Carefully To Give Full Play To Its Functions And Ensure Safety..
【Multi-Protection Functions】Including Overload Protection, Fuse Broken-Motor Stops Protection, Over-Voltage / Low-Voltage Protection, Restarted By Frequency Track After Instantaneous Stop, Anti-Stall During Acceleration/Deceleration Operation, Electronic Circuit Protection. And Many Other Protection Functions, Such As Over-Heat Protection, Restriction Of Reverse Running, Direct Start After Power On, Fault Reset, Parameter Lock Pid, One-Drive-More, Ect..
【General Control】- In Addition To 4 Segment Reduction Time (0.1-6500 Seconds) Can Be Arbitrarily Selected, Not Only Can Set A V / F Curve, But Also Set Torque, Up To 10.0% Start Torque Can Reach 150%. There Are Also Other Functions, Like An Automatic Voltage Regulator (Avr), Deceleration Stop Or Free Stop, Dc Brake, Automatic Reset Reset, Frequency Tracking, Plc Program Control, Transverse Control, Carrier Adjustable By Max 20Khz, Ect..
Features
- Technical Parameters - Control Model: SPWN. Power: 2.2KW. Input 1 or 3 phase 110V 0-50Hz/60Hz. Output 3phase 110V 0-400Hz. Communication Control: RS-485. Vibration: below 0.5G. Operation Temperature: -10 40 . Five-Digits Display and Status Indicator Lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect.
- General Control - In addition to 4 segment reduction time (0.1-6500 seconds) can be arbitrarily selected, not only can set a V / F curve, but also set torque, up to 10.0% start torque can reach 150%. There are also other functions, like an automatic voltage regulator (AVR), deceleration stop or free stop, DC brake, automatic reset reset, frequency tracking, PLC program control, transverse control, carrier adjustable by max 20kHz, ect.
- Input/Output Terminals - 6 Multi-function input terminals can implement 8 speed control, program operation, 4 segment reduction switching, UP/DOWN functions, counter, external emergency stop function. There are 5 multi-function output terminals for displaying running, zero speed, counter, external abnormity, program operation and other information and warnings.
- Multi-Protection Functions Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection, restarted by frequency track after instantaneous stop, anti-stall during acceleration/deceleration operation, electronic circuit protection. And many other protection functions, such as over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, ect.
- Installation/use environment In order to make the cooling effect, the frequency converter must be installed vertically and ensure that the air is flowing smoothly. Before installing and using the product, please read the instruction manual (included in the package) of the inverter carefully to give full play to its functions and ensure safety.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Huanyang
Dimensions: 0.01 x 6.46 x 0.00 inches | Weight: 3.86 Pounds
See On Amazon #25
RATTMMOTOR 500W Spindle Motor CNC Air Cooled Spindle Motor ER11 12-100VDC 0.5NM 12000RPM + 52mm Spindle Motor Mount Clamp for CNC Router Milling Machine
Asin: B09PR6QTK3 | Model: RTM5.2 | PartNumber: RTM5.2
Note: This Motor Has Quiet Operation, Small Volume And High Speed, And The Rear End Of The Motor Is Reinforced With A Cooling Fan, Which Can Be Safely Worked For A Long Time!.
52Mm Diameter Spindle Motor Mount,Compared With The Aluminium Profile Fixture,The Accuracy Is Much Higher , And It Is Hard To Deform..
Can Be Used For Solid Wood Pcb Engraving, Drilling, Etc..
Idling Speed: 2000-12000R/Min; Torque：0.5Nm; Chuck Part Length: 45Mm; Diameter: 52Mm; Insulation Resistance: >2 Megohms; Insulation Dielectric Strength: 400V; Spindle Radial Runout 0.01-0.03 High Precision..
Features
- Power: 500W, Air cooling method, working voltage: 12-100VDC.
- Idling Speed: 2000-12000r/min; Torque 0.5NM; Chuck part length: 45MM; Diameter: 52mm; Insulation resistance: >2 megohms; Insulation dielectric strength: 400V; Spindle radial runout 0.01-0.03 high precision.
- Note: This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
- Can be used for solid wood PCB engraving, drilling, etc.
- 52mm Diameter spindle motor mount,compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 2.20 x 0.01 x 0.00 inches | Weight: 2.54 Pounds
See On Amazon #26
RATTMMOTOR Upgrade 3018 PRO CNC Wood Router Machine Kit 3 Axis GRBL DIY Mini CNC Engraver Milling Machine+Offline Controller+Emergency Stop and Limit Switch for Cutting Plastic Acrylic PVC PCB Wood
Asin: B09X9X33Z5 | Model: RTM3018PRO-N | PartNumber: RTM3018PRO-N
【Added New Function】 Added An Emergency Stop Button, During The Engraving Process, If The User Encounters An Emergency And Needs To Stop The Engraving Immediately, User Can Press The Button To Stop The Operation. Added X/Y/Z Axis Limit Switch, When The Engraving Machine Moves Up And Down Or Left And Right, It Will Stop Immediately If It Exceeds The Forming Range..
【Supported Engraving Materials】Wood, Plastic, Acrylic, Pvc, Pcb, Carbon Fiber, Density Board, Plastic Phone Cases, Rubber Stamps, Copper , Aluminum And Other Soft Materials. It Should Be Noted That Materials Such As Jewelry, Jade, Stainless Steel, Stone, Ceramics And Other Similar Materials Are Not Supported..
【Grbl Control Board And Offline Controller】 ①The Grbl Board Supports Emergency Stop And X/Y/Z Axis Limit Functions, Which Can Be Used Together With The Emergency Stop Button And Limit Switch On The Engraving Machine To Ensure A Safe And Simple Working Environment.② Other Functions And Features: Maximum Support For 20000Rpm Spindle, Tool Setting(Probe) , A Power Switch Button And A Silent Fan Cooling. And Equipped With A Cnc Grbl Offline Controller..
【Detailed Installation And Operating Instructions】With The English Instruction Manual From The Engraving Machine Installation To Engraving, There Are Detailed Instructions For The X-Axis-Y-Axis-Z-Axis To The Overall Assembly Of The Engraving Machine, And Each Installation Step Parts Which Is Needed Has Been Remarked; With Detailed Assembly And Use Videos, Even Novices Don't Have To Worry About The Assembly And Use Of The Machine..
Features
- Update CNC 3018PRO-N The two sides of the Y-axis of the engraving machine are replaced with orange bakelite resin boards, which makes the engraving machine look brighter and more novel. The fixed external frame is made of resin, the work stable is made of aluminum alloy, and the screw rod is made of stainless steel, all of those makes the machine lightweight but more durable, more good apperance.
- Detailed installation and operating instructions With the English instruction manual from the engraving machine installation to engraving, there are detailed instructions for the X-axis-Y-axis-Z-axis to the overall assembly of the engraving machine, and each installation step parts which is needed has been remarked; With detailed assembly and use videos, even novices don't have to worry about the assembly and use of the machine.
- Added new function Added an emergency stop button, during the engraving process, if the user encounters an emergency and needs to stop the engraving immediately, user can press the button to stop the operation. Added X/Y/Z axis limit switch, when the engraving machine moves up and down or left and right, it will stop immediately if it exceeds the forming range.
- GRBL Control Board and Offline Controller The GRBL board supports emergency stop and X/Y/Z axis limit functions, which can be used together with the emergency stop button and limit switch on the engraving machine to ensure a safe and simple working environment. Other functions and features: maximum support for 20000RPM spindle, tool setting(probe) , a power switch button and a silent fan cooling. And equipped with a CNC GRBL offline controller.
- Supported engraving materials Wood, plastic, acrylic, pvc, pcb, carbon fiber, density board, plastic phone cases, rubber stamps, copper , aluminum and other soft materials. It should be noted that materials such as jewelry, jade, stainless steel, stone, ceramics and other similar materials are not supported.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 7.09 x 17.32 x 9.84 Inches
See On Amazon #27
RATTMMOTOR DC Motor CNC 775 Spindle Motor 100W 12-24VDC 20000RMP + ER11 Collet for DIY Mini CNC Router 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro Engraving Router Milling Machine
Asin: B08FD2PJHK | Model: CNC-775 | PartNumber: CNC-775 | Ean: 0619191686209 | UPC: 619191686209
Large Torque, Low Friction And Stable Operation..
Package Include: 1 ×775 Spindle Motor Er11+ 2×Wrench + 1×Cables.
Mainly For Diy Mini Cnc Wood Router Machine, Such As Cnc 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro 2418.
Double Ball Bearings Have Low Noise..
Features
- Front and rear double ball bearings, universal DC 12V-24V voltage.
- Double ball bearings have low noise.
- Large torque, low friction and stable operation.
- Mainly for DIY MINI CNC wood router machine, such as CNC 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro 2418
- Package include: 1 775 Spindle motor ER11+ 2 wrench + 1 cables
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 1.75 x 0.00 x 0.00 inches | Weight: 0.99 Pounds
See On Amazon #28
RATTMMOTOR CBX1605 200mm / 7.87" Linear Stage Actuator with Square Linear Rai+1605 Ballscrew, Motorized XYZ Linear Stage Table CNC Linear Motion Rail Guide+Nema23 Stepper Motor for CNC Router Machine
Asin: B077Y22436 | Model: CBX1605-200A | PartNumber: CBX1605-200A | Ean: 0654615632653 | UPC: 654615632653
【1605 Ball Screw】- Drive Type: Cbx1605 Ball Screw. Effective Travel Length: 200Mm. Screw Precision Grade: C7. Screw Pitch: 5Mm. Flange Nut Screw Rod With Precision Up To 0.03Mm..
【Main Application】- The Important Hardware Equipment That Constitutes Industrialized Machinery Can Accurately Control The Accuracy And Speed Of The Moving Parts Of Mechanical Equipment. It Is Suitable For Lathes, Cnc Machine Tools, Machining, Mechanical Equipment, Automation Devices And Other Industrial Automation Fields..
【Slide Block】- Length: 60Mm. M4 Sliding Nut Design On The Side, Limit Switch Can Be Installed At Any Position. The Slider Is Made Of 6030 Aluminum And Are Oxidized, Which Is Beautiful And Generous..
【Nema23 Stepper Motor】- Motor Length: 56Mm. Motor Flange Size: 57Mm. Holding Torque: 1.2N.M. Phase: 2. Current: 3A. Resistance: 0.8 Ω. Inductance: 2.4Mh. Rotor Inertia: 440G.Cm. Wiring: Red(A+), Green(A-), Yellow(B+), Blue(B-)..
Features
- Product Structure Analysis - Nema23 Stepper Motor+Stepper Motor Connecting Piece+Coupling+1605 Ball Scew+Slide Block+Sliding Table +Bearing Piece+Base.
- Nema23 Stepper Motor - Motor length: 56mm. Motor flange size: 57mm. Holding torque: 1.2N.m. Phase: 2. Current: 3A. Resistance: 0.8 . Inductance: 2.4mH. Rotor Inertia: 440g.cm. Wiring: Red(A+), Green(A-), Yellow(B+), Blue(B-).
- 1605 Ball Screw - Drive type: CBX1605 ball screw. Effective travel length: 200mm. Screw precision grade: C7. Screw Pitch: 5mm. Flange nut screw rod with precision up to 0.03mm.
- Slide Block - Length: 60mm. M4 sliding nut design on the side, limit switch can be installed at any position. The slider is made of 6030 aluminum and are oxidized, which is beautiful and generous.
- Main Application - The important hardware equipment that constitutes industrialized machinery can accurately control the accuracy and speed of the moving parts of mechanical equipment. It is suitable for lathes, CNC machine tools, machining, mechanical equipment, automation devices and other industrial automation fields.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Rattmmotor company
Dimensions: 0.00 x 0.01 x 0.00 inches | Weight: 4.37 pounds
See On Amazon #29
RATTMMOTOR DC Motor CNC 997 Spindle Motor 400W 12-48VDC 0.99N.m 5000-20000RMP Double Ball Bearing, Diameter 52mm Spindle Motor for DIY Mini CNC Router Lathes Milling Engraver Polishing Machine
Asin: B0CB2R7VGG | Ean: 0754193411661 | UPC: 754193411661
【High Power, High Torque】High Power Spindle Motor With The Beginning Of 9, The Rated Power Is 400W, The Torque Is Up To 15Kg/Cm, The Torque Is 0.99N.M, The Torque Is Strong, Far More Than 7 Motors, It Is The Special Motor For Diy Drilling, Milling, Cutting And Grinding..
【Double Ball Bearings, Strong Magnetism And Low Noise】Front And Rear Ball Bearings Are Highly Efficient And Quiet. With Its Own Cooling Fan, Can Efficiently Solve The Problem Of Heat Dissipation. 7-Stage Rotor, Pure Copper Coil, High Magnetic Force, High Efficiency, Long-Lasting And Durable..
【5000-2000Rpm】Rated Current 1.85A, Rated Voltage 12-48V Dc, Motor Speed Up To 20,000Rpm, 12V/5000Rpm, 24V/10,000Rpm, 36V/15,000Rpm, 48V/20,000Rpm, Supports Forward And Reverse, High Speed, Strong Momentum..
【Motor Size】Motor Length Is 120Mm/4.72Inch, Diameter Is 54Mm/2.13Inch, Shaft Diameter Is 6.35Mm/0.25Inch, Output Shaft Length Is 20Mm/0.79Inch, Motor Weight Is 760G/1.68 Ib..
Features
- Applicable Fields Cutting machines, belt sanders, lathes, milling machines, bench drills, hand drills, polishing machines, bead machines, lawn mowers, wire saws, band saws, electric grinders, engraving machines and other miniature machines.
- Motor size Motor length is 120mm/4.72inch, diameter is 54mm/2.13inch, shaft diameter is 6.35mm/0.25inch, output shaft length is 20mm/0.79inch, motor weight is 760g/1.68 Ib.
- High power, high torque High power spindle motor with the beginning of 9, the rated power is 400W, the torque is up to 15KG/CM, the torque is 0.99N.m, the torque is strong, far more than 7 motors, it is the special motor for DIY drilling, milling, cutting and grinding.
- 5000-2000RPM Rated current 1.85A, rated voltage 12-48V DC, motor speed up to 20,000rpm, 12V/5000rpm, 24V/10,000rpm, 36V/15,000rpm, 48V/20,000rpm, supports forward and reverse, high speed, strong momentum.
- Double ball bearings, strong magnetism and low noise Front and rear ball bearings are highly efficient and quiet. With its own cooling fan, can efficiently solve the problem of heat dissipation. 7-stage rotor, pure copper coil, high magnetic force, high efficiency, long-lasting and durable.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 4.72 x 2.05 x 2.05 inches
See On Amazon #30
RATTMMOTOR EBX1605 200mm / 7.87" CNC Linear Stage Actuator, Double Optical Axis Linear Slide Rail and 1605 Ball Screw CNC Linear Motion Rail Guide with Nema23 Stepper Motor for DIY CNC Router Machine
Asin: B08HCMBM3Q | Ean: 0619191721221 | UPC: 619191721221
【Stable Operation】 Stable Bearings Are Added At The Motor End To Better Maintain Accuracy And Improve Operation Stability. 80*50Mm Slider, Embedded With Linear Bearing To Ensure Uniform Axial Force And Ensure Running Positioning Accuracy..
【Strong Load Capacity】Two 12Mm Optical Shaft Transmission, Double Shaft Support Load Is Larger, The Horizontal Load Is 50Kg/110.23Ib, And The Vertical Load Is 10Kg/22.05Ib. It Is Suitable For Lathes, Cnc Machine Tools, Machining, Mechanical Equipment, Automation Devices And Other Industrial Automation Fields..
【High Precision】1605 Ball Screw, C7 Grade Screw Accuracy, Screw Reciprocating Accuracy Of 0.01Mm, Repeat Positioning Accuracy Of ±0.03Mm, Accurate Positioning, Good Hardness, Quiet Operation, And Long Service Life..
【Flexible Installation】80Mm Aluminum Profile Base, M4 Movable Nut At The Bottom, Side Mounting Groove For Easy Fixing, M3 Nut Can Be Installed With Limit, Easy To Install. This Linear Stage Can Be Used In Combination With Multi-Axis, Horizontal Cross, Gantry Type, Three-Axis Type, Four-Axis Type, Etc..
Features
- Compact Structure The base is 2080 profile, the tail end bearing piece, front end is equipped with Nema23 stepper motor and the flange piece connecting the motor, with the load-bearing slide table, the 1605 lead screw and the coupling, adding a stable bearing, and the double optical axis design. Working Length: 200mm/7.87inch.
- Flexible Installation 80mm aluminum profile base, M4 movable nut at the bottom, side mounting groove for easy fixing, M3 nut can be installed with limit, easy to install. This linear stage can be used in combination with multi-axis, horizontal cross, gantry type, three-axis type, four-axis type, etc.
- Stable Operation Stable bearings are added at the motor end to better maintain accuracy and improve operation stability. 80*50mm slider, embedded with linear bearing to ensure uniform axial force and ensure running positioning accuracy.
- High Precision 1605 ball screw, C7 grade screw accuracy, screw reciprocating accuracy of 0.01mm, repeat positioning accuracy of 0.03mm, accurate positioning, good hardness, quiet operation, and long service life.
- Strong Load Capacity Two 12mm optical shaft transmission, double shaft support load is larger, the horizontal load is 50KG/110.23Ib, and the vertical load is 10KG/22.05Ib. It is suitable for lathes, CNC machine tools, machining, mechanical equipment, automation devices and other industrial automation fields.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon