RATTMMOTOR DMA860S Stepper Motor Driver MAX 8.2A CNC Digital Stepper Motor Controller 128 Subdivision, Drive 4,6,8-Wire 2-Phase Stepper Motor for CNC Router Engraving Machine
Asin: B0C4H7BJCY | Ean: 0754193411678 | UPC: 754193411678
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【16 Selectable Micro-Step Resolutions】The Optional Values Of Micro-Step Resolutions Are 400, 800, 1000, 1600, 2000, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 20000, 25600, 40000, 51200..
【High Reliability】High Reliability Using Multi-Layer Boards And Surface Mount Packaging, Leaving Enough Margin For Power Devices..
【Applications】Suitable For All Kinds Of Small And Medium-Sized Automation Equipment And Instruments,Such As: Lithium Battery Equipment, 3C Electronic Equipment, Engraving Machine, Marking Machine,Cutting Machine, Lasrr Phototypesetting, Engraving Machine,Plotter, Cnc Machine Tool,Automatic Assembly Equipment,Etc..
【Characteristics】Power Supply Range: Ac18v—110V. Dc18v—160V; Optically Isolated Differential Signal Input, The Maximum Input Pulse Frequency Is 300Khz; The Pulse, Direction And Enable Terminals Have Constant Current Input Function, Which Can Be Directly Connected To The Input Signal, Instead Of Adding A Series Resistor For Step-Down Current-Limiting Protection..
【16 Selectable Current】The Optional Values Of Current Parameters Are 2.2A, 2.6A, 3.0A, 3.4A, 3.8A, 4.2A, 4.6A, 5.0A, 5.4A, 5.8A, 6.2A, 6.6A, 7.0A, 7.4A, 7.8A, 8.2A. ( The Current Is Halved After The Is Is Stationary ).
【Product Introduction ②】The Dma860s Driver Can Select The Current And Subdivision Through The Dip Switch. There Are 16 Subdivisions And 16 Current For Selection. It Has Overvoltage, Undervoltage, Phase Current And Total Current Overcurrent Protection. The Input And Output Control Signal All Use Photoelectric Isolation..
Features
- Product Introduction DMA860S 2 phase stepper motor driver is a cost-effective subdivision driver designed based on PI control algorithm. It has excellent performance, high speed and high torque output, low noise, low vibration, and low heat.
- Product Introduction The DMA860S driver can select the current and subdivision through the DIP switch. There are 16 subdivisions and 16 current for selection. It has overvoltage, undervoltage, phase current and total current overcurrent protection. The input and output control signal all use photoelectric isolation.
- 16 Selectable micro-step resolutions The optional values of micro-step resolutions are 400, 800, 1000, 1600, 2000, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 20000, 25600, 40000, 51200.
- 16 Selectable current The optional values of current parameters are 2.2A, 2.6A, 3.0A, 3.4A, 3.8A, 4.2A, 4.6A, 5.0A, 5.4A, 5.8A, 6.2A, 6.6A, 7.0A, 7.4A, 7.8A, 8.2A. ( The current is halved after the IS is stationary )
- Applications Suitable for all kinds of small and medium-sized automation equipment and instruments,such as: lithium battery equipment, 3C electronic equipment, engraving machine, marking machine,cutting machine, lasrr phototypesetting, engraving machine,plotter, CNC machine tool,automatic assembly equipment,etc.
- Characteristics Power supply range: AC18V 110V. DC18V 160V; Optically isolated differential signal input, the maximum input pulse frequency is 300KHz; The pulse, direction and enable terminals have constant current input function, which can be directly connected to the input signal, Instead of adding a series resistor for step-down current-limiting protection.
- High reliability High reliability using multi-layer boards and surface mount packaging, leaving enough margin for power devices.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon Similar To RATTMMOTOR DMA860S Stepper Motor Driver
#1
HiLetgo 4pcs L298N Motor Driver Controller Board Module Stepper Motor DC Dual H-Bridge for Arduino Smart Car Power UNO MEGA R3 Mega2560
Asin: B07BK1QL5T | Model: 3-01-0032-4PCS | PartNumber: 3-01-0032-4PCS
Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency.
Large Capacity Filter Capacitance, Afterflow Protection Diode, More Stable And Reliable.
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability.
Features
- L298N as main driver chip makes strong driving ability/small heating/strong anti-interference/low calorific value
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
- Dual-channel H-bridge driver working mode creates higher working efficiency
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- Large capacity filter capacitance, afterflow protection diode, more stable and reliable
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo®
Dimensions: 1.18 x 2.36 x 2.17 inches
See On Amazon #2
ELEGOO 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board Compatible with Arduino
Asin: B01CP18J4A | Model: EL-SM-003 | PartNumber: EL-SM-003 | Ean: 0746591610357 | UPC: 746591610357
5 Line 4 Phase Can Be Used For Ordinary Uln2003 Chip Driver, Connect To The 2 Phase , Support The Development Board，With Convenient Use, Direct Docking.
Great Packing In A Box : 5 Set Uln2003 Stepper Motor + Driver Board (With A Little Gift).
Drive Module Board Size(In): 1.37*1.18*0.6 ; Stepper Motor Diameter: 1.06(In) ; Stepper Motor Lines: 9.45(In).
A, B, C, D Four-Phase Led Indicates The Status Of The Stepper Motor Work..
Features
- Stepper motor with a standard interface, when used directly pluggable.
- A, B, C, D four-phase LED indicates the status of the stepper motor work.
- 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board With convenient use, direct docking
- Drive Module Board Size(in): 1.37*1.18*0.6 ; Stepper Motor diameter: 1.06(in) ; Stepper Motor lines: 9.45(in)
- Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board (with a little gift)
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 2.00 x 5.00 x 5.00 inches | Weight: 0.65 pounds
See On Amazon #3
STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-Lead W/ 1m Cable and Connector Compatible with 3D Printer/CNC
Asin: B00PNEQKC0 | Model: 17HS19-2004S | PartNumber: 17HS19-2004S
Ean: 0701056358779, 0798167993654, 5915903798815, 0789164236554, 0715624560631, 0191579035491, 0191388825313, 0712322835252, 0190657686020
UPC: 191388825313, 798167993654, 191579035491, 701056358779, 190657686020, 712322835252, 789164236554, 715624560631
Nema 17 Bipolar 1.65"X1.65"X1.89" 4-Wire.
Rated Current 2.0A & Resistance 1.4Ohms.
Build With 39.37"( 1M) Cable And 0.1" Pitch Connector.
59Ncm(83.6Oz.In) Holding Torque.
Features
- 3D printer motor with high torque
- 59Ncm(83.6oz.in) holding torque
- NEMA 17 bipolar 1.65x1.65x1.89 4-wire
- Build with 39.37( 1m) Cable and 0.1 pitch Connector
- Rated current 2.0A & resistance 1.4ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OSM Technology Co.,Ltd.
Dimensions: 1.89 x 1.65 x 1.65 inches | Weight: 0.88 Pounds
See On Amazon #4
HiLetgo 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap Suitable for Mendel Huxley Arduino
Asin: B07BND65C8 | Model: 3-01-0108-5pcs | PartNumber: 3-01-0108-5pcs
Adjustable Current Control Lets You Set The Maximum Current Output With A Potentiometer.
Over-Temperature Thermal Shutdown, Under-Voltage Lockout, And Crossover-Current Protection.
Intelligent Chopping Control That Automatically Selects The Correct Current Decay Mode (Fast Decay Or Slow Decay).
Five Different Step Resolutions: Full-Step, Half-Step, Quarter-Step, Eighth-Step, And Sixteenth-Step. Output Drive Capacity Of Up To 35 V And ± 1.2 A.
Features
- Simple step and direction control interface,Take anti-static measures before you use the A4988 modules in case of short-circuit
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step. Output drive capacity of up to 35 V and 1.2 A
- Adjustable current control lets you set the maximum current output with a potentiometer
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #5
STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-Step Resolutions for Nema 17 and 23 Stepper Motor
Asin: B06Y5VPSFN | Model: DM542T | PartNumber: DM542T | Ean: 0715624558829, 0715776647549, 0714485410482 | UPC: 714485410482, 715624558829, 715776647549
1.0~4.2A, 20~50Vdc, 1/128 Microstep Resolution.
100% Service Satisfactory. We Provided This Stepper Motor Kit With 30 Days Free Replacement Or Refund, 1 Year Warranty And Whole Life Customer Service From The Date Of Purchasing..
Pulse Signal: 4-5V When Pul-High, 0-0.5V Whenpul-Low. The Same As Dir And Ena Signals.
Industrial-Grade Stepper Driver, Suit For Nema 17 And 23 Stepper Motor.
Features
- Stepper motor driver DM542T is updated to version V4.0, add 5V/24V logical voltage selector, alarm outputs. Please attention, Factory setting is 24V, if you need to use 5V, switch selector on the top of the driver.
- Industrial-grade Stepper Driver, Suit for Nema 17 and 23 Stepper Motor
- 1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution
- Pulse signal: 4-5V when PUL-HIGH, 0-0.5V whenPUL-LOW. The same as DIR and ENA signals
- 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing.
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OMC CORPORATION LIMITED
Dimensions: 1.00 x 0.00 x 2.97 Inches | Weight: 0.46 Pounds
See On Amazon #6
Usongshine TB6600 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Phase Hybrid Stepper Motor for CNC/42 57 86 Stepper Motor 1 pcs)
Asin: B07HHS14VQ | Model: TB6600-4A | PartNumber: TB6600-4A | Ean: 1006410064105
✿The Largest 32 Subdivision Of The 6 Models Are Optional; Suitable For 4Wires, 6 Wires And 8 Wires Stepper Motor. It Can Control 2 Phase Stepper Motor Forward And Reverse Rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 Phase Excitation Mode..
✿Suitable For A Wide Range Of Stepping Motors Of Nema 17, 23 And 24 Can Used In Various Kinds Of Machines, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, Pick-Place Devices And So On..
✿Protect Form✿: Energy-Saving Semi-Automatic Current Lock Function, Built-In Temperature Protection And Over Current Protection, Under Voltage Protection, Preventing Reverse..
✿Stepper Motor Driver✿: 9V-42V Dc Power Supply, H Bridge Bipolar Constant Phase Flow Drive. The Maximum 4.0A Of The Eight Kinds Of Output Current..
Features
- Package included: 1 x Stepper Motor Driver.
- Stepper Motor Driver : 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current.
- The largest 32 subdivision of the 6 models are optional; Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
- Protect form : Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection, under voltage protection, Preventing reverse.
- Suitable for a wide range of stepping motors of Nema 17, 23 and 24 can used in various kinds of machines, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, pick-place devices and so on.
- See more on Amazon...
Brand: Usongshine | Manufacturer: Usongshine
Dimensions: 1.10 x 3.74 x 3.74 Inches
See On Amazon #7
Stepper Motor Driver Controller Integrated Board Forward/Reverse Pulse Speed Angle Control Module PLC Serial Communication for NEMA 17 23 Motor
Asin: B0B1HNS9L2 | Model: 4257 | PartNumber: 4257 | Ean: 0706316482645 | UPC: 706316482645
[4 Control Mode] In Addition To Its Built-In Parameters Work Mode,It Can Also Control By External Buttons Or Others Driver Or Uart Commands.
[Hd Lcd Display] The Hd Lcd Can Clearly Display The Speed/Delay/Cycle Times, Making It Easier To Browse And Set Various Parameters. Realize High-Precision Control Of The Motor. Parameters Support Memory Function That Will Not Be Lost.
[9 Work States] Built-In 9 Default Workflow Programs, Covering Most Applications, To Meet The Needs Of Different Scenarios.Forward/Reverse/Delay/Loop/Self-Locking/No-Lock/Rotating Speed And So On.
[Forward & Reverse] It Can Not Only Change Rotation Direction By Pressing Button, But Also By Potentiometer. It Is Also Automatically Change The Direction Through The Selected Working Mode To Achieve Multi-Scene And Multi-Application.
Features
- [Controller & Driver] Integrated step motor controller and driver functions.It can not only realize the drive motor, but also control the working state of the stepper motor in real time
- [Forward & Reverse] It can not only change rotation direction by pressing button, but also by potentiometer. It is also automatically change the direction through the selected working mode to achieve multi-scene and multi-application
- [4 Control Mode] In addition to its built-in parameters work mode,it can also control by external buttons or others driver or UART commands
- [9 work states] Built-in 9 default workflow programs, covering most applications, to meet the needs of different scenarios.Forward/Reverse/Delay/Loop/Self-locking/No-lock/Rotating speed and so on
- [HD LCD display] The HD LCD can clearly display the speed/delay/cycle times, making it easier to browse and set various parameters. Realize high-precision control of the motor. Parameters support memory function that will not be lost
- See more on Amazon...
Brand: BANRIA | Manufacturer: BANRIA
Dimensions: 1.61 x 3.11 x 1.69 inches | Weight: 0.14 pounds
See On Amazon #8
EASON Stepper Motor Driver TB6600 4A DC9-42V 32 Subdivision for Nema 17, 23 Series Stepper Motor CNC Controller Single Axis Hybrid MicroStepping
Asin: B08SG7L54W | Ean: 0653871352206 | UPC: 653871352206
Suitable For Drive Two-Phase Stepping Motor Dynamic Voltage 9V To 42V, The Maximum Drive Current Is Less Than 4A..
Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
Suitable For Step Motor:Nema(17,23) 42, 57 Type 2 Phase 4 Phase (4 / 6 / 8 Wires).
The Subdivision Is Increased To 32 Subdivision, Which Is Suitable For High Subdivision..
Features
- This driver is an upgraded version of TB6600 and with plastic cover.
- The subdivision is increased to 32 subdivision, which is suitable for high subdivision.
- Suitable for drive Two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A.
- Suitable for step motor:NEMA(17,23) 42, 57 type 2 phase 4 phase (4 / 6 / 8 wires)
- Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- See more on Amazon...
Brand: Eason | Manufacturer: Yisheng Technology
Dimensions: 0.00 x 3.74 x 0.00 Inches | Weight: 0.00 Pounds
See On Amazon #9
HiLetgo 5pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board for Arduino PI PIC Raspberry Pi
Asin: B00LPK0E5A | Model: 3-01-0153 | PartNumber: 3-01-0153 | Ean: 0702082654729 | UPC: 702082654729
Diameter: 28Mm.
Speed Down Stepping Motor.
Voltage: 5V.
Stepping Angle: 5.625 X 1/64.
Features
- HiLetgo Stepper Motor+ Driver Board
- Stepping angle: 5.625 X 1/64
- Diameter: 28mm
- Voltage: 5V
- Speed down stepping motor
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #10
CNC Digital Stepper Driver DM556 Stepper Motor Controller 2-phase Stepper Motor Driver 20-50V DC Max 5.6A 128 subdivision For Nema 23, 24 and Nema 34 stepper motor
Asin: B08J3NFF9V | Ean: 0791548328502 | UPC: 791548328502
Anti-Resonance For Optimal Torque, Extra Smooth Motion, Low Motor Heating And Noise.
Please Note: If There Is Any Problem, Please Feel Free To Contact Us, Each Defect Items Could Be Refunded Or Reshipped, We Will Try Out Utmost To Support You..
Package: 1Piece Dm556 Driver.
This High Subdivision Driver Is Suitable For High Subdivision Motor. Suitable For Stepper Motor: 57,60,86 Type 2-Phase (4-Wire, 6-Wire, 8-Wire).
Features
- Suitable for Nema 23 ,Nema 24 and Nema34 Stepper Motor 2-phase hybrid stepper motors (Outer diameter: 57, 60,86mm).
- This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor: 57,60,86 type 2-phase (4-wire, 6-wire, 8-wire)
- Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
- Package: 1piece DM556 driver
- PLEASE NOTE: if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you.
- See more on Amazon...
Brand: HoCenWay | Manufacturer: HONGCHENWEI
Dimensions: 1.34 x 4.41 x 2.97 Inches
See On Amazon #11
10 Pieces Stepper Motor Driver Module with Heat Sink Compatible with Stepstick Stepper A4988 3D Printer Reprap, CNC Machine or Robotics
Asin: B09FQ3G5XQ | Model: Photect-Driver Module-09 | PartNumber: Photect-Driver Module-09
Five-Step Resolution: There Are 5-Steps Resolution Of The Stepper Motor Drive Modules, Such As Full-Step, Half-Step, Quarter-Step, Eight-Step, Sixteen-Step, And The Output Drive Capacity Is Up To 35V And -2A~2A.
Wide Application: The Stepper Motor Drive Module Is Compatible With Stepper Motor/ 3D Printer/ Cnc/ Engraving Machine/ Supported 3D Printer And More; Please Confirm Whether The Product Model Is Suitable Before Buying.
Protection Function: The Stepper Motor Drive Modules Can Provide Thermal Shutdown Protection, Over Current Protection, Ground Fault Protection And Crossing Current Protection.
Easy To Operate: This Is A Complete Micro-Stepping Motor Driver With A Built-In Converter, Easy To Operate; When Micro-Stepping Is Running, The Chopper Control Compatible With A4988 Can Automatically Select The Current Decay Mode, Slow Or Mixed.
Features
- The package includes: you will receive 10 pieces of stepper motor drive modules and 10 heat sink in the package, enough quantity for your use and replacement
- Easy to operate: this is a complete micro-stepping motor driver with a built-in converter, easy to operate; When micro-stepping is running, the chopper control compatible with A4988 can automatically select the current decay mode, slow or mixed
- Five-step resolution: there are 5-steps resolution of the stepper motor drive modules, such as full-step, half-step, quarter-step, eight-step, sixteen-step, and the output drive capacity is up to 35V and -2A~2A
- Protection function: the stepper motor drive modules can provide thermal shutdown protection, over current protection, ground fault protection and crossing current protection
- Wide application: the stepper motor drive module is compatible with stepper motor/ 3D printer/ CNC/ engraving machine/ supported 3D printer and more; Please confirm whether the product model is suitable before buying
- See more on Amazon...
Brand: Photect | Manufacturer: Photect
See On Amazon #12
HiLetgo 5pcs DRV8825 Stepper Motor Driver Module for 3D Printer RepRap 4 RAMPS1.4 StepStick
Asin: B01NCE3ZW1 | Model: 3-01-1177 | PartNumber: 3-01-1177
4-Layer, 2 Oz Copper Pcb For Improved Heat Dissipation.
Simple Step And Direction Control Interface.
Can Interface Directly With 3.3 V And 5 V Systems.
45 V Maximum Supply Voltage.
Features
- DRV8825 Stepper Motor Driver Module
- 45 V maximum supply voltage
- 4-layer, 2 oz copper PCB for improved heat dissipation
- Can interface directly with 3.3 V and 5 V systems
- Simple step and direction control interface
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #13
5Pcs TMC2208 3D Printer Stepper Motor Driver, DORHEA TMC2208 V1.2 Stepper Driver Module with Heat Sink Screwdriver for 3D Printer Controller Mother Boards Reprap Ramps1.4 MKS Prusa i3 Ender-3 Pro
Asin: B082LSQWZF | Model: D15796-1 | PartNumber: D15796-1 | Ean: 0701715433649 | UPC: 701715433649
Compatible With Existing 3D Printer Electronics, Eliminating The Expensive Costs Of Redesign. It Can Replace The Original Tmc2100 A4988 Drv8825 Lv8729, Lower Heat, Especially For 3D Printing Market..
The Adapter Comes With Stackable Headers, So You Can Use It Direct On Your 3D Printer Board. The Tester Is Pre-Configured For Standalone Operation On An Usb To Serial Adapter (Vio-Vm Jumper Closed)..
With This Adapter You Can Test Your Silentstepstick Or Flash The Tmc2208 Silentstepstick With An Usb-To-Serial Converter..
The Flexible Microplyer Interpolation Unit Provides Up To 256 Subdivisions, Allowing Perfect Sinusoidal Control Even In Systems With Limited Pulse Frequencies; These Are Also Designed Because Stealthchop2 Ultra-Quiet Technology Is Widely Used In 3D Printing..
Features
- TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision.
- The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing.
- Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market.
- With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter.
- The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed).
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #14
VKLSVAN 3 Sets 4-Phase 28BYJ-48 DC 5V Stepper Motor + ULN2003 Drive Board Module for Arduino PI PIC and for Raspberry Pi
Asin: B0CLYCM1CP
5 Line 4 Phase Can Be Used For Ordinary Uln2003 Chip Driver, Connect To The 2 Phase , Support The Development Board，With Convenient Use, Direct Docking.
Package Included:3Pcs Uln2003 Stepper Motor+ 3Pcs 28Byj-48 Driver Board.
Widely Application: It Is Suitable For Various Platforms Such As 51、Avr、Arm Compatible With Arduino And The Needs Of Robot Design And Development..
The Uln2003 Module Is Often Used To Drive A Small Five-Wire Four-Phase Motor, And There's A,B,C,D Light Diodes Indicate The Working State Of The Four-Phase Stepper Motor. Equipped With A Standard Interface Of The Stepper Motor,Can Directly Plugged In And Out..
Features
- Stepper motor can converts pulse signals into angular displacement or linear displacement. It is the main executive element in modern digital program control systems.
- The ULN2003 module is often used to drive a small five-wire four-phase motor, and there's A,B,C,D light diodes indicate the working state of the four-phase stepper motor. Equipped with a standard interface of the stepper motor,can directly plugged in and out.
- 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board With convenient use, direct docking
- Widely application: It is suitable for various platforms such as 51 avr arm Compatible with Arduino and the needs of robot design and development.
- Package included:3PCS Uln2003 Stepper Motor+ 3PCS 28BYJ-48 Driver Board
- See more on Amazon...
Brand: VKLSVAN | Manufacturer: VKLSVAN
See On Amazon #15
6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board
Asin: B07YRHX73L | Model: Atnsinc-01 | PartNumber: Atnsinc-01 | Ean: 0701715431065 | UPC: 701715431065
A, B, C, D Four-Phase Led Indicates The Status Of The Stepper Motor Work..
Great Packing In A Box : 6 Pcs Uln2003 Stepper Motor + Driver Board (With A Little Gift)..
5 Line 4 Phase Can Be Used For Ordinary Uln2003 Chip Driver, Connect To The 2 Phase, Support The Development Board, With Convenient Use, Direct Docking..
Drive Module Board Size(In): 1.37 * 1.18 * 0.6(In); Stepper Motor Diameter: 1.06(In); Stepper Motor Lines: 9.45(In)..
Features
- The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable.
- Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in); Stepper Motor diameter: 1.06(in); Stepper Motor lines: 9.45(in).
- A, B, C, D four-phase LED indicates the status of the stepper motor work.
- 5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking.
- Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift).
- See more on Amazon...
Brand: Atnsinc | Manufacturer: Atnsinc
Weight: 0.49 pounds
See On Amazon #16
Teyleten Robot TMC2209 V2.0 Stepper Motor Driver StepStick 2.5A UART Ultra Silent for Nano SKR V1.3/1.4 Ender 3 Control Board 3D Printer Parts Replace A4988 5pcs
Asin: B09BK57KNY | Model: G78-1 | PartNumber: G78-1 | Ean: 0755454774471 | UPC: 755454774471
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.51 x 0.81 x 0.61 Inches
See On Amazon #17
Teyleten Robot 5pcs ULN2003 28BYJ 48 5V 4-Phase Stepper Motor with 5V Stepper Drive Board for Arduino PI PIC Raspberry Pi
Asin: B08HCS369F | Model: ULN2003+28BYJ-48 | PartNumber: ULN2003+28BYJ-48 | Ean: 8425520537799
It Also Can Be Connected As 2 Phase To Use.
Diameter: 27Mm;Voltage: 5V; 12V;Step Angle: 5.625 X 1/64;Reduction Ratio: 1/64.
Features
- Gear Stepper Motor DC 5V/12V 4 Phase Step Motor Reduction Step Motor
- Diameter: 27mm;Voltage: 5V; 12V;Step angle: 5.625 x 1/64;Reduction ratio: 1/64
- It also can be connected as 2 phase to use
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.38 x 1.36 x 1.26 Inches
See On Amazon #18
Teyleten Robot 3D Printer Parts DRV8825 Stepper Motor Driver Module with Heat Sink for Ramps 1.4 StepStick A4988 (5pcs)
Asin: B0CP92T4QR
Can Interface Directly With 3.3V And 5V Systems.
4 Layer 2 Ounces Of Copper Pcb, In Order To Improve Heat Dissipation.
Thermal Shutdown Over Temperature, Overcurrent Shutdown, Undervoltage Lockout Short-Circuit Short-Circuit Load Protection.
Six Different Steps Resolution: The Whole Step, Half Step, 1/4-Step1 / 8-Step1 / 16-Step, 1/32-Step.
Features
- Simple Steps And Direction Control Interface
- Six Different Steps Resolution: The Whole Step, Half Step, 1/4-Step1 / 8-Step1 / 16-Step, 1/32-Step
- CAN Interface Directly With 3.3V And 5V Systems
- Thermal Shutdown Over Temperature, Overcurrent Shutdown, Undervoltage Lockout Short-Circuit Short-Circuit Load Protection
- 4 Layer 2 Ounces Of Copper PCB, In Order To Improve Heat Dissipation
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #19
DC 5-12V/15-160V Stepper Motor Drive,PWM Adjustable Stepper Motor Controller Signal Generator Speed Regulator
Asin: B07HNSVMVH | Ean: 0713325028436 | UPC: 713325028436
To Control The Stepper Motor, Mus Connect To The Driver.
Frequency Of Measurement Can Amount Pul And Common Cathode Terminal (Gnd) Two Ports..
Pul + And Pul- Pulsed Positive And Negative; En + And En- Is To Enable The Positive And Negative Terminals; Dir + And Dir- Are The Positive And Negative Directions..
3 Frequency: High: 5.8Khz-127Khz, Mid: 590Hz-15.8Khz, Low: 82Hz-2.3Khz.
Features
- Power supply: 15-160VDC or 5-12VDC. If you are using 5-12VDC power, positive end connect DC 5-12V Input, negative end connect Common Cathode End.
- 3 Frequency: High: 5.8KHZ-127KHZ, Mid: 590HZ-15.8KHZ, Low: 82HZ-2.3KHZ
- To control the stepper motor, mus connect to the driver
- PUL + and PUL- pulsed positive and negative; EN + and EN- is to enable the positive and negative terminals; DIR + and DIR- are the positive and negative directions.
- Frequency of measurement can amount PUL and common cathode terminal (GND) two ports.
- See more on Amazon...
Brand: SYWAN | Manufacturer: Sywan
Weight: 0.11 pounds
See On Amazon #20
Twotrees Nema 17 Stepper Motor + Stepper Motor Driver, TB6600 4A 9-42V Nema 17/23 CNC Controller Single Axes Hybrid - Upgraded Version
Asin: B07PNZRPQH | Model: 2012-02-21 | PartNumber: 2012-02-21 | Ean: 8431269736331
【3】Motor Driver: 9V-42V Dc Power Supply, H-Bridges Bipolar Constant Phase Current Drive. The Maximum 4.0A Of The Eight Types Of Output Current..
【5】Protect Form: Overheated Protection, Overcurrent Protection, Undervoltage Protection, Prevention Of Inversion..
【4】The Largest 32 Divisions Of The 6 Models Are Optional; Suitable For 4 Wires, 6 Wires And 8 Wires Stepper Motor..
【2】Suitable For A Wide Range Of Stepper Motors From Nema Size 17,23 And 24 (42 * 42Mm To 60 * 60Mm). It Can Be Used In Various Types Of Machines, Such As Xyz Tables, Labellers, Laser Cutters, Engraving Machines, Pick-Place Devices And So On..
Features
- 1 Package included: 1 x Stepper Motor Driver,1 x Stepper Motor, 1 x Wire.
- 2 Suitable for a wide range of stepper motors from NEMA size 17,23 and 24 (42 * 42mm to 60 * 60mm). It can be used in various types of machines, such as XYZ tables, labellers, laser cutters, engraving machines, pick-place devices and so on.
- 3 Motor driver: 9V-42V DC power supply, H-bridges bipolar constant phase current drive. The maximum 4.0A of the eight types of output current.
- 4 The largest 32 divisions of the 6 models are optional; Suitable for 4 wires, 6 wires and 8 wires stepper motor.
- 5 Protect form: Overheated protection, overcurrent protection, undervoltage protection, prevention of inversion.
- See more on Amazon...
Brand: Twotrees | Manufacturer: Twotrees
Weight: 1.00 Pounds
See On Amazon
Looking For Something Else?
Search