OTC 6471 Camshaft Sensor Synchronizer Tool for Select 1993-1995 Ford and Mercury Vehicles
Asin: B000O3I636 | Model: 6471 | PartNumber: 6471 | Ean: 0731413037542 | UPC: 731413037542
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Correctly Aligns Shaft And Housing For Insertion Into Engine Once Engine Has Been Rotated To Top Dead Center On The No. 1 Cylinder's Compression Stroke.
Same As Ford No. 303-453 (T93p-12200-A); Includes Instructions For Proper Use Of Tool.
For Use On The Following Vehicles: 1993-95 3.0L V6 Ford Taurus And Mercury Sable.
This Tool Is A 'Must Have' For Ensuring Correct Installation Of The Cam Sensor Housing.
Features
- OTC Ford/Mercury Camshaft Sensor Synchronizer Tool
- This tool is a 'must have' for ensuring correct installation of the cam sensor housing
- Correctly aligns shaft and housing for insertion into engine once engine has been rotated to top dead center on the no. 1 cylinder's compression stroke
- For use on the following vehicles: 1993-95 3.0L V6 Ford Taurus and Mercury Sable
- Same as Ford No. 303-453 (T93P-12200-A); includes instructions for proper use of tool
- See more on Amazon...
First Available: 08/25/2011
Brand: OTC | Manufacturer: OTC
Dimensions: 1.00 x 7.70 x 4.20 inches | Weight: 0.10 Pounds
Warranty: Limited Lifetime Warranty
See On Amazon Similar To OTC 6471 Camshaft Sensor Synchronizer
#1
OTC 6024 Crankshaft Positioning Tool for Ford, Black
Asin: B000F5ECRM | Model: 6024 | PartNumber: 6024 | Ean: 0731413032554, 0799621067768 | UPC: 799621067768, 731413032554
Preventing Timing Misalignment On These 'Interference' Design Ford Engines Is Critical As Valves Will Contact Pistons If Timing Chain Is Installed In An Incorrect Position, Resulting In Severe Damage.
Otc Recommends (But Does Not Require) That The No. 6024 Crankshaft Alignment Tool Be Used With Nos. 6009 And 6020 Camshaft Alignment Tools To Safeguard Alignment When Servicing Cams Or Chains.
Simply Install Crankshaft Positioning Tool Over Crankshaft Snout (Aligning Crankshaft Woodruff Key With Keyway On Tool) And Engine Front Cover Alignment Dowel To Correctly Position Crank At Tdc.
Handy Tool Prevents Accidental Movement Of The Crankshaft When Doing Camshaft Or Timing Chain Service Or Installation On These 'Interference' Engines.
Features
- OTC Crankshaft Positioning Tool for use on 1993 and newer Ford 4.2L V6; 4.6L 2 valve and 4.6L 4-valve V8, 5.4L V8, and 6.8L V10 engines - same as Ford No. 303-448
- Handy tool prevents accidental movement of the crankshaft when doing camshaft or timing chain service or installation on these 'interference' engines
- Preventing timing misalignment on these 'interference' design Ford engines is critical as valves will contact pistons if timing chain is installed in an incorrect position, resulting in severe damage
- Simply install crankshaft positioning tool over crankshaft snout (aligning crankshaft woodruff key with keyway on tool) and engine front cover alignment dowel to correctly position crank at TDC
- OTC recommends (but does not require) that the No. 6024 Crankshaft Alignment Tool be used with Nos. 6009 and 6020 Camshaft alignment tools to safeguard alignment when servicing cams or chains
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.50 x 7.75 x 4.25 inches | Weight: 0.70 pounds
Warranty: LIFETIME
See On Amazon #2
OTC Tools 5882 Cam Gear Alignment Tool for Detroit Diesel Series 60 Engines
Asin: B07ZRPKZVV | Model: 5882 | PartNumber: 5882 | Ean: 0731413590375 | UPC: 731413590375
For Use On Detroit Diesel Series 60 Engines.
Similar To J-45946; Made In The Usa.
Crafted From High-Grade Materials To Ensure Quality Performance Over The Lifetime Of The Tool.
Pin On The Tool Fits Into The Cam Timing Hole For Proper Alignment.
Features
- OTC's Cam Gear Alignment Tool is used to properly align the cam gear during camshaft assembly installation
- Pin on the tool fits into the cam timing hole for proper alignment
- For use on Detroit Diesel Series 60 engines
- Crafted from high-grade materials to ensure quality performance over the lifetime of the tool
- Similar to J-45946; Made in the USA
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 6.00 x 10.00 x 8.00 inches
Warranty: Per Contract with Amazon
See On Amazon #3
OTC (6477) Camshaft Holding Tool for Ford , Black
Asin: B000K2KZIU | Model: 6477 | PartNumber: 6477 | Ean: 0731413037603 | UPC: 731413037603
1997 - 2002 5.4L V8 Econoline Expedition And F-Series Truck.
Same As Ford Number 303-557 T96t-6256-B.
1997 - 2002 6.8L V10 Econoline And 1998 - 2002 5.4L V8 Lincoln Navigator-R.
1997 - 2002 4.6L Windsor V8 Econoline And F-Series Truck.
Features
- Cam Tools ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs
- 1997 - 2002 4.6L Windsor V8 Econoline and F-Series Truck
- 1997 - 2002 5.4L V8 Econoline Expedition and F-Series Truck
- 1997 - 2002 6.8L V10 Econoline and 1998 - 2002 5.4L V8 Lincoln Navigator-r
- Same as Ford number 303-557 T96T-6256-B
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.00 x 11.00 x 6.50 inches | Weight: 1.00 Pounds
Warranty: Limited lifetime warranty
See On Amazon #4
OTC Tools 6745 Camshaft Actuator Locking Tool
Asin: B07CVKY6MK | Model: 6745 | PartNumber: 6745 | Ean: 0731413589508 | UPC: 731413589508
Applications: 2013-14 Cadillac Ats, 2014 Cadillac Cts, 2013-14 Chevrolet Malibu, 2014 Chevrolet Impala & Buick Regal 2.0L, 2.5L Engines.
Item Package Weight: 0.24 Lb.
Similar To En-5793.
Features
- This locking tool engages the slots in the face of the actuator and bolts to the cylinder head and cover to hold the actuator in position to remove or install the actuator bolt
- Similar to EN-5793
- Applications: 2013-14 Cadillac ATS, 2014 Cadillac CTS, 2013-14 Chevrolet Malibu, 2014 Chevrolet Impala & Buick Regal 2.0L, 2.5L engines
- Item Package Weight: 0.24 lb
- See more on Amazon...
First Available: 05/04/2018
Brand: OTC | Manufacturer: OTC Tools
Weight: 0.20 pounds
See On Amazon #5
OTC (6475) Crankshaft TDC Timing Pin for Ford
Asin: B002YKI7KO | Model: 6475 | PartNumber: 6475 | Ean: 0731413037580 | UPC: 731413037580
Same As Ford Number 303-574 T97p-6000-A.
1997 - 2002 Ford Contour/Mercury Mystique With 2.0L 4 Cyl Dohc Zetec Engine With Variable Cam Timing.
Features
- Cam Tools ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs
- 1997 - 2002 Ford Contour/Mercury Mystique with 2.0L 4 cyl DOHC Zetec engine with variable cam timing
- Same as Ford number 303-574 T97P-6000-A
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.30 x 7.40 x 3.30 Inches | Weight: 0.19 pounds
Warranty: Limited lifetime warranty
See On Amazon #6
OTC 7840 Caster/Camber Adjusting Tool for GM
Asin: B000O80B1G | Model: 7840 | PartNumber: 7840 | Ean: 0731413023118 | UPC: 731413023118
This Allows You To Tighten The Adjusting Bolts.
Primarily For Servicing Ford Products.
For Use On 1993 To 2000 Chevrolet Camaro And Pontiac Firebird.
Simply Place It Into The Holes In The Cross-Member And Lower Control Arm Then Turn The Tool's Turn-Buckle Nut To Hold The Correct Adjustment.
Features
- This tool is designed to make caster/camber adjustments quick and easy
- Simply place it into the holes in the cross-member and lower control arm then turn the tool's turn-buckle nut to hold the correct adjustment
- This allows you to tighten the adjusting bolts
- For use on 1993 to 2000 Chevrolet Camaro and Pontiac Firebird
- Primarily for servicing Ford products
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 5.40 x 15.20 x 2.70 Inches | Weight: 3.40 pounds
Warranty: Limited lifetime warranty
See On Amazon #7
OTC 6469 Camshaft Sensor Synchronizer Tool for Select 1997 - 2008 Ford and Mercury Vehicles
Asin: B000HTNNX0 | Model: 6469 | PartNumber: 6469 | Ean: 0731413037528 | UPC: 731413037528
Correctly Aligns Shaft And Housing For Insertion Into Engine Once Engine Has Been Rotated To Top Dead Center On The No. 1 Cylinder's Compression Stroke.
Same As Ford No. 303-562 (T96t-12200-A); Includes Instructions For Proper Use Of Tool.
For: 1997 3.8L V6 Cougar/Thunderbird; 1997-08 4.2L V6 Econoline, F-Series Truck; 1996-98 5.0L V8 Explorer/Mountaineer; 2004-07 4.2L V6 Freestar/Monterey; 1996-98 3.8L V6 Mustang/Windstar.
This High Quality Metal Tool Is A 'Must Have' For Ensuring Correct Installation Of The Cam Sensor Housing.
Features
- OTC Ford/Mercury Camshaft Sensor Synchronizer Tool
- This high quality metal tool is a 'must have' for ensuring correct installation of the cam sensor housing
- Correctly aligns shaft and housing for insertion into engine once engine has been rotated to top dead center on the no. 1 cylinder's compression stroke
- For: 1997 3.8L V6 Cougar/Thunderbird; 1997-08 4.2L V6 Econoline, F-Series Truck; 1996-98 5.0L V8 Explorer/Mountaineer; 2004-07 4.2L V6 Freestar/Monterey; 1996-98 3.8L V6 Mustang/Windstar
- Same as Ford No. 303-562 (T96T-12200-A); includes instructions for proper use of tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.80 x 7.70 x 4.20 inches | Weight: 0.30 Pounds
Warranty: Limited lifetime warranty
See On Amazon #8
OTC 6691 Camshaft Retaining Tool - Compatible with Select GM DOHC V6 Engines
Asin: B07L5W6JFW | Model: 6691 | PartNumber: 6691 | Ean: 0731413589768 | UPC: 731413589768
Includes 3 Plates: One Plate Is Used To Tighten One Set Of Cams, Two Plates Are Used In Conjunction To Tighten The Second Set Of Cams.
Similar To En-48383.
Extra-Large Size Prevents Valve Covers From Being Installed With The Plates In Place, Protecting The Engine From Inadvertent Damage.
Three-Plate Set Is Used To Tighten Both Sets Of Cams To Prevent Them From Turning While Setting Timing.
Features
- Oversized retaining plates lock camshafts together at top dead center (TDC) on GM 2.8L, 3.0L, and 3.6L DOHC V6 engines
- Three-plate set is used to tighten both sets of cams to prevent them from turning while setting timing
- Includes 3 plates: one plate is used to tighten one set of cams, two plates are used in conjunction to tighten the second set of cams
- Extra-large size prevents valve covers from being installed with the plates in place, protecting the engine from inadvertent damage
- Similar to EN-48383
- See more on Amazon...
First Available: 06/07/2023
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 0.60 x 6.90 x 2.00 Inches | Weight: 1.00 Pounds
Warranty: Per Contract with Amazon
See On Amazon #9
OTC (6686) Cam Tool Set - GM NorthStar V8
Asin: B000TRJ7US | Model: 6686 | PartNumber: 6686 | Ean: 0731413417450 | UPC: 731413417450
Cylinder Heads And Valve Trains Tend To Wear Out Somewhere Between 80000 To 120000 Miles.
Over One Million Northstar V8s Have Been Sold Since 1993.
Features
- Kit is indispensable for quickly and correctly servicing GM NorthStar 4.0L and 4.6L V8 engines
- Over one million NorthStar V8s have been sold since 1993
- Cylinder heads and valve trains tend to wear out somewhere between 80000 to 120000 miles
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 4.80 x 26.30 x 15.90 inches | Weight: 5.10 pounds
Warranty: Limited lifetime warranty
See On Amazon #10
OTC 6473 Camshaft Sensor Synchronizer Tool for Select 1998 - 2008 Ford and Mercury Vehicles
Asin: B000RFDGEK | Model: 6473 | PartNumber: 6473 | Ean: 0731413037566 | UPC: 731413037566
Correctly Aligns Shaft And Housing For Insertion Into Engine Once Engine Has Been Rotated To Top Dead Center On The No. 1 Cylinder's Compression Stroke.
Same As Ford No. 303-589; Includes Instructions For Proper Use Of Tool.
For Use On The Following Vehicles: 1998-08 3.0L V6 Ranger; 1998-05 3.0L V6 Sable, Taurus (Vin U); 1998-06 3.0L V6 Sable, Taurus (Vin Z); 1998-03 3.0L V6 Windstar.
This High Quality Metal Tool Is A 'Must Have' For Ensuring Correct Installation Of The Cam Sensor Housing.
Features
- OTC Ford/Mercury Camshaft Sensor Synchronizer Tool
- This high quality metal tool is a 'must have' for ensuring correct installation of the cam sensor housing
- Correctly aligns shaft and housing for insertion into engine once engine has been rotated to top dead center on the no. 1 cylinder's compression stroke
- For use on the following vehicles: 1998-08 3.0L V6 Ranger; 1998-05 3.0L V6 Sable, Taurus (VIN U); 1998-06 3.0L V6 Sable, Taurus (VIN Z); 1998-03 3.0L V6 Windstar
- Same as Ford No. 303-589; includes instructions for proper use of tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.20 x 7.00 x 4.50 inches | Weight: 0.30 pounds
Warranty: Limited lifetime warranty
See On Amazon #11
OTC Tools 5884 Cam Gear Retaining Tool for Detroit Diesel Series 60 Engines
Asin: B07ZRQ9KFV | Model: 5884 | PartNumber: 5884 | Ean: 0731413590443 | UPC: 731413590443
Tool Installs Into The Gear Case, Engaging One Of The Lightening Holes In The Camshaft Drive Gear.
Similar To J-35652-B; Made In The Usa.
Uses Two Of The Engine's Existing Access Cover Bolts To Secure The Tool To The Gear Case.
This Tool Is Used To Securely Hold The Cam Gear Stationary While Removing/Installing The Cam Gear Retaining Bolt Without Damage.
Features
- OTC Cam Gear Retaining Tool for Detroit Diesel Series 60 engines Uses two of the existing access cover bolts (not included) to secure the tool to the gear case
- This tool is used to securely hold the cam gear stationary while removing/installing the cam gear retaining bolt without damage
- Tool installs into the gear case, engaging one of the lightening holes in the camshaft drive gear
- Uses two of the engine's existing access cover bolts to secure the tool to the gear case
- Similar to J-35652-B; Made in the USA
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 5.00 x 7.00 x 5.00 inches
Warranty: Per Contract with Amazon
See On Amazon #12
OTC 6472 Camshaft Sensor Synchronizer Tool for Select 1995 - 1998 Ford and Mercury Vehicles
Asin: B000VNFUJ2 | Model: 6472 | PartNumber: 6472 | Ean: 0731413037559 | UPC: 731413037559
Correctly Aligns Shaft And Housing For Insertion Into Engine Once Engine Has Been Rotated To Top Dead Center On The No. 1 Cylinder's Compression Stroke.
Same As Ford No. 303-529 (T95t-12200-A); Includes Instructions For Proper Use Of Tool.
For Use On The Following Vehicles: 1995-97 3.0L V6 Aerostar, Ranger, Windstar; 1996-98 4.0L V6 Aerostar, Explorer, Ranger; 1996-97 3.0L V6 2V Sable, Taurus (Not For 3.0L Dohc Engines).
This High Quality Metal Tool Is A 'Must Have' For Ensuring Correct Installation Of The Cam Sensor Housing.
Features
- OTC Ford/Mercury Camshaft Sensor Synchronizer Tool
- This high quality metal tool is a 'must have' for ensuring correct installation of the cam sensor housing
- Correctly aligns shaft and housing for insertion into engine once engine has been rotated to top dead center on the no. 1 cylinder's compression stroke
- For use on the following vehicles: 1995-97 3.0L V6 Aerostar, Ranger, Windstar; 1996-98 4.0L V6 Aerostar, Explorer, Ranger; 1996-97 3.0L V6 2V Sable, Taurus (not for 3.0L DOHC engines)
- Same as Ford No. 303-529 (T95T-12200-A); includes instructions for proper use of tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.30 x 7.40 x 4.20 Inches | Weight: 0.30 pounds
Warranty: Limited lifetime warranty
See On Amazon #13
OTC 6470 Camshaft Sensor Synchronizer Tool for Select 1999 - 2007 Ford and Mercury Vehicles
Asin: B000RFDGF4 | Model: 6470 | PartNumber: 6470 | Ean: 0731413037535 | UPC: 731413037535
Correctly Aligns Shaft And Housing For Insertion Into Engine Once Engine Has Been Rotated To Top Dead Center On The No. 1 Cylinder's Compression Stroke.
Same As Ford No. 303-630; Includes Instructions For Proper Use Of Tool.
For Use On: 1999-02 5.0L V8 Explorer/Mountaineer; 2004-07 3.9L V6 Freestar (Vin 6); 2004 3.9L V6 Monterey (Vin 6); 1999-04 3.8L V6 Mustang; 1999-03 3.8L V6 Windstar.
This High Quality Metal Tool Is A 'Must Have' For Ensuring Correct Installation Of The Cam Sensor Housing.
Features
- OTC Ford/Mercury Camshaft Sensor Synchronizer Tool
- This high quality metal tool is a 'must have' for ensuring correct installation of the cam sensor housing
- Correctly aligns shaft and housing for insertion into engine once engine has been rotated to top dead center on the no. 1 cylinder's compression stroke
- For use on: 1999-02 5.0L V8 Explorer/Mountaineer; 2004-07 3.9L V6 Freestar (VIN 6); 2004 3.9L V6 Monterey (VIN 6); 1999-04 3.8L V6 Mustang; 1999-03 3.8L V6 Windstar
- Same as Ford No. 303-630; includes instructions for proper use of tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 1.40 x 7.70 x 4.20 inches | Weight: 0.35 Pounds
Warranty: Limited lifetime warranty
See On Amazon #14
OTC 6483 Camshaft Sensor Synchronizer Tool for Ford
Asin: B000RFBJ3A | Model: 6483 | PartNumber: 6483 | Ean: 0731413037665, 0069060061949 | UPC: 731413037665, 069060061949
Same As Ford Number 303-638.
1999 - 2002 40L Push Rod V6 Ford Explorer And Mercury Mountaineer.
Features
- Cam Tools ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs
- 1999 - 2002 40L Push Rod V6 Ford Explorer and Mercury Mountaineer
- Same as Ford Number 303-638
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.80 x 8.60 x 5.00 Inches | Weight: 0.24 pounds
Warranty: Limited lifetime warranty
See On Amazon #15
OTC (6687) Cam Tool Set - GM V-6 Engines
Asin: B004CGKR9M | Model: 6687 | PartNumber: 6687 | Ean: 0731413545139 | UPC: 731413545139
Item Package Dimension: 15.29L X 12.59W X 3.89H Inches.
Item Package Quantity - 1.
Product Type - Auto Accessory.
Item Package Weight - 4.25 Pounds.
Kit Is Designed To Save Shop Time When Servicing Gm 30 And 32 V-6 Engines.
Features
- Required tools to adjust and hold cam shaft timing on GM 30 and 32 V-6 engines
- Kit is designed to save shop time when servicing GM 30 and 32 V-6 engines
- Item Package Dimension: 15.29L x 12.59W x 3.89H inches
- Item Package Weight - 4.25 Pounds
- Item Package Quantity - 1
- Product Type - AUTO ACCESSORY
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 3.80 x 16.00 x 12.40 inches | Weight: 3.70 pounds
Warranty: Limited lifetime warranty
See On Amazon #16
OTC 6467 Camshaft Sensor Synchronizer Tool for Select 1989 - 1998 Ford and Mercury Vehicles
Asin: B000IHJZP6 | Model: 6467 | PartNumber: 6467 | Ean: 0731413037504 | UPC: 731413037504
Correctly Aligns Shaft And Housing For Insertion Into Engine Once Engine Has Been Rotated To 26 Degrees After Top Dead Center On The No. 1 Cylinder's Compression Stroke.
Same As Ford No. 303-358 (T89p-12200-A); Includes Instructions For Proper Use Of Tool.
For Use On The Following Vehicles: 1990 -97 3.8L V6 Thunderbird/Cougar, 1989-95 3.8L V6 Supercharged Thunderbird/Cougar, 1994-98 3.8L V6 Mustang, 1998 3.8L V6 Windstar.
This Tool Is A 'Must Have' For Ensuring Correct Installation Of The Cam Sensor Housing.
Features
- OTC Ford/Mercury Camshaft Sensor Synchronizer Tool
- This tool is a 'must have' for ensuring correct installation of the cam sensor housing
- Correctly aligns shaft and housing for insertion into engine once engine has been rotated to 26 degrees after top dead center on the no. 1 cylinder's compression stroke
- For use on the following vehicles: 1990 -97 3.8L V6 Thunderbird/Cougar, 1989-95 3.8L V6 Supercharged Thunderbird/Cougar, 1994-98 3.8L V6 Mustang, 1998 3.8L V6 Windstar
- Same as Ford No. 303-358 (T89P-12200-A); includes instructions for proper use of tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.80 x 4.80 x 2.30 inches | Weight: 0.10 pounds
Warranty: Limited lifetime warranty
See On Amazon #17
OTC 6486A Cam Tool Set for Ford 4V Engine
Asin: B00IYO6OSG | Model: 6486A | PartNumber: 6486A | Ean: 0731413574733 | UPC: 731413574733
Ford 2.3L 4V L4 Engines Used In 2005-2008 Escape Hybrid And Mariner Hybrid.
Ford 2.5L 4V L4 Engines Used In 2009-2012 Escaper And Mariner, 2010-2012 Fusion And Fusion Hybrid And 2011-2012 Mkz.
Ford 2.0L 4V L4 Engines Used In 1994-2012 Multiple Vehicle Platforms.
Features
- 3 cam tools for working on Ford engines
- Ford 2.0L 4V L4 engines used in 1994-2012 multiple vehicle platforms
- Ford 2.3L 4V L4 engines used in 2005-2008 Escape Hybrid and Mariner Hybrid
- Ford 2.5L 4V L4 engines used in 2009-2012 Escaper and Mariner, 2010-2012 Fusion and Fusion Hybrid and 2011-2012 MKZ
- See more on Amazon...
First Available: 05/23/2014
Brand: OTC | Manufacturer: OTC
Dimensions: 4.00 x 4.00 x 3.00 inches | Weight: 1.00 Pounds
Warranty: Limited Lifetime
See On Amazon #18
OTC (6671 Camshaft Alignment Tool for Many Ford Engines
Asin: B0819XC4VX | Model: 6671 | PartNumber: 6671 | Ean: 0731413591679 | UPC: 731413591679
Similar To 303-1565.
Made In The Usa.
Engines Found In Focus, Edge, Explorer, Escape, Taurus, Mustang, Mkx, Mkt, Mkz.
Features
- Applications include: 2010-Later 2. 0L Duratec and 2. 0L EcoBoost, 2012-Later 2. 0L GTDI, 2015-Later 2. 3L EcoBoost, 2016-Later 3. 5L EcoBoost
- Engines found in Focus, Edge, Explorer, Escape, Taurus, Mustang, MKX, MKT, MKZ
- Similar to 303-1565
- Made in the USA
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 1.00 x 1.00 x 1.00 inches
Warranty: Refer To Amazon
See On Amazon #19
OTC Tools 6688 GM in-Line 5, 6, or V6 Cam Tool Set
Asin: B006X15TL0 | Model: 6688 | PartNumber: 6688 | Ean: 0731413544255 | UPC: 731413544255
The Tools Are Actually Easier To Use Than The Original Oe Essential Tools.
Designed To Save Time When Servicing Gm 5-, 6-Cylinder Engines.
Features
- Comprehensive tool kit
- Designed to save time when servicing GM 5-, 6-cylinder engines
- The tools are actually easier to use than the original OE essential tools
- See more on Amazon...
First Available: 06/22/2015
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 5.30 x 25.40 x 11.90 inches | Weight: 11.10 pounds
See On Amazon
Looking For Something Else?
Search