OTC 6691 Camshaft Retaining Tool - Compatible with Select GM DOHC V6 Engines
Asin: B07L5W6JFW | Model: 6691 | PartNumber: 6691 | Ean: 0731413589768 | UPC: 731413589768
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Includes 3 Plates: One Plate Is Used To Tighten One Set Of Cams, Two Plates Are Used In Conjunction To Tighten The Second Set Of Cams.
Similar To En-48383.
Extra-Large Size Prevents Valve Covers From Being Installed With The Plates In Place, Protecting The Engine From Inadvertent Damage.
Three-Plate Set Is Used To Tighten Both Sets Of Cams To Prevent Them From Turning While Setting Timing.
Features
- Oversized retaining plates lock camshafts together at top dead center (TDC) on GM 2.8L, 3.0L, and 3.6L DOHC V6 engines
- Three-plate set is used to tighten both sets of cams to prevent them from turning while setting timing
- Includes 3 plates: one plate is used to tighten one set of cams, two plates are used in conjunction to tighten the second set of cams
- Extra-large size prevents valve covers from being installed with the plates in place, protecting the engine from inadvertent damage
- Similar to EN-48383
- See more on Amazon...
First Available: 06/07/2023
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 0.60 x 6.90 x 2.00 inches | Weight: 1.00 pounds
Warranty: Per Contract with Amazon
See On Amazon Similar To OTC 6691 Camshaft Retaining Tool
#1
OTC 6024 Crankshaft Positioning Tool for Ford, Black
Asin: B000F5ECRM | Model: 6024 | PartNumber: 6024 | Ean: 0731413032554, 0799621067768 | UPC: 799621067768, 731413032554
Preventing Timing Misalignment On These 'Interference' Design Ford Engines Is Critical As Valves Will Contact Pistons If Timing Chain Is Installed In An Incorrect Position, Resulting In Severe Damage.
Otc Recommends (But Does Not Require) That The No. 6024 Crankshaft Alignment Tool Be Used With Nos. 6009 And 6020 Camshaft Alignment Tools To Safeguard Alignment When Servicing Cams Or Chains.
Simply Install Crankshaft Positioning Tool Over Crankshaft Snout (Aligning Crankshaft Woodruff Key With Keyway On Tool) And Engine Front Cover Alignment Dowel To Correctly Position Crank At Tdc.
Handy Tool Prevents Accidental Movement Of The Crankshaft When Doing Camshaft Or Timing Chain Service Or Installation On These 'Interference' Engines.
Features
- OTC Crankshaft Positioning Tool for use on 1993 and newer Ford 4.2L V6; 4.6L 2 valve and 4.6L 4-valve V8, 5.4L V8, and 6.8L V10 engines - same as Ford No. 303-448
- Handy tool prevents accidental movement of the crankshaft when doing camshaft or timing chain service or installation on these 'interference' engines
- Preventing timing misalignment on these 'interference' design Ford engines is critical as valves will contact pistons if timing chain is installed in an incorrect position, resulting in severe damage
- Simply install crankshaft positioning tool over crankshaft snout (aligning crankshaft woodruff key with keyway on tool) and engine front cover alignment dowel to correctly position crank at TDC
- OTC recommends (but does not require) that the No. 6024 Crankshaft Alignment Tool be used with Nos. 6009 and 6020 Camshaft alignment tools to safeguard alignment when servicing cams or chains
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.50 x 7.75 x 4.25 inches | Weight: 0.70 Pounds
Warranty: LIFETIME
See On Amazon #2
OTC Terminal Release Tool,Black,7-13/64" L
Asin: B004FZ9EX0 | Model: 6766 | PartNumber: 6766 | Ean: 0731413548413 | UPC: 731413548413
Country Of Manufacturer: China.
Package Dimensions: 4.1" L X 7.2" W X 2.1" H.
Manufacturer: Otc.
Features
- Fleet and Vehicle Maintenance
- Manufacturer: Otc
- Country of Manufacturer: China
- Package Dimensions: 4.1 L x 7.2 W x 2.1 H
- See more on Amazon...
Brand: OTC | Manufacturer: Otc
Dimensions: 2.10 x 4.10 x 7.20 inches | Weight: 0.25 pounds
Warranty: One year limited warranty
See On Amazon #3
OTC (6477) Camshaft Holding Tool for Ford , Black
Asin: B000K2KZIU | Model: 6477 | PartNumber: 6477 | Ean: 0731413037603 | UPC: 731413037603
1997 - 2002 5.4L V8 Econoline Expedition And F-Series Truck.
Same As Ford Number 303-557 T96t-6256-B.
1997 - 2002 6.8L V10 Econoline And 1998 - 2002 5.4L V8 Lincoln Navigator-R.
1997 - 2002 4.6L Windsor V8 Econoline And F-Series Truck.
Features
- Cam Tools ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs
- 1997 - 2002 4.6L Windsor V8 Econoline and F-Series Truck
- 1997 - 2002 5.4L V8 Econoline Expedition and F-Series Truck
- 1997 - 2002 6.8L V10 Econoline and 1998 - 2002 5.4L V8 Lincoln Navigator-r
- Same as Ford number 303-557 T96T-6256-B
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.00 x 11.00 x 6.50 inches | Weight: 1.00 Pounds
Warranty: Limited lifetime warranty
See On Amazon #4
OTC 6469 Camshaft Sensor Synchronizer Tool for Select 1997 - 2008 Ford and Mercury Vehicles
Asin: B000HTNNX0 | Model: 6469 | PartNumber: 6469 | Ean: 0731413037528 | UPC: 731413037528
Correctly Aligns Shaft And Housing For Insertion Into Engine Once Engine Has Been Rotated To Top Dead Center On The No. 1 Cylinder's Compression Stroke.
Same As Ford No. 303-562 (T96t-12200-A); Includes Instructions For Proper Use Of Tool.
For: 1997 3.8L V6 Cougar/Thunderbird; 1997-08 4.2L V6 Econoline, F-Series Truck; 1996-98 5.0L V8 Explorer/Mountaineer; 2004-07 4.2L V6 Freestar/Monterey; 1996-98 3.8L V6 Mustang/Windstar.
This High Quality Metal Tool Is A 'Must Have' For Ensuring Correct Installation Of The Cam Sensor Housing.
Features
- OTC Ford/Mercury Camshaft Sensor Synchronizer Tool
- This high quality metal tool is a 'must have' for ensuring correct installation of the cam sensor housing
- Correctly aligns shaft and housing for insertion into engine once engine has been rotated to top dead center on the no. 1 cylinder's compression stroke
- For: 1997 3.8L V6 Cougar/Thunderbird; 1997-08 4.2L V6 Econoline, F-Series Truck; 1996-98 5.0L V8 Explorer/Mountaineer; 2004-07 4.2L V6 Freestar/Monterey; 1996-98 3.8L V6 Mustang/Windstar
- Same as Ford No. 303-562 (T96T-12200-A); includes instructions for proper use of tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.80 x 7.70 x 4.20 inches | Weight: 0.30 Pounds
Warranty: Limited lifetime warranty
See On Amazon #5
OTC (6689) Cam Tool Set - Chrysler/Jeep
Asin: B000GTIQ9M | Model: 6689 | PartNumber: 6689 | Ean: 0731413047787 | UPC: 731413047787
These 15 Tools Are Based On Oe Designs.
Read Full Product Description For Vehicle Coverage.
If Cam Timing Is Not Correct The Engine May Still Run But Emissions And Mileage Will Be Affected And The Engine Computer May Also Initiate The Check Engine Light.
Features
- Ensure proper cam timing when servicing timing belts chains head gaskets or performing other valve train repairs
- If cam timing is not correct the engine may still run but emissions and mileage will be affected and the engine computer may also initiate the check engine light
- These 15 tools are based on OE designs
- Read full product description for vehicle coverage
- See more on Amazon...
First Available: 11/14/2007
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 14.50 x 26.25 x 7.25 inches | Weight: 25.10 Pounds
Warranty: 1 year manufacturer
See On Amazon #6
OTC 6009 Cam Positioning Tool for Ford - Pair
Asin: B000OCIVZA | Model: 6009 | PartNumber: 6009 | Ean: 0731413031786 | UPC: 731413031786
Use With Otc's 6020 Is Mandatory For All Applications (6020 Provides The 'Flats' Needed To Lock The Camshaft In Place) Except For 1991 4.6L 2V V8's Which Require The 6009 Tools Only.
Tool Performs The Same Function As Ford No. 303-380 (T91p-6256-A).
For Use On Select 1991 To 2012 Ford Vehicles Equipped With 4.6L And 5.4L V8, And 6.8L V10 Engines - See Product Description Below For A Detailed List Of Applications.
Designed To Work In Conjunction With Otc's 6020 Cam Positioning Tool To Hold Cams In Correct Position When Servicing, Preventing Accidental Timing Changes Which Can Cause Severe Engine Damage.
Features
- OTC 6009 Cam Positioning Tool for select Ford engines - pair
- Designed to work in conjunction with OTC's 6020 Cam Positioning Tool to hold cams in correct position when servicing, preventing accidental timing changes which can cause severe engine damage
- Use with OTC's 6020 is mandatory for all applications (6020 provides the 'flats' needed to lock the camshaft in place) except for 1991 4.6L 2V V8's which require the 6009 tools only
- For use on select 1991 to 2012 Ford vehicles equipped with 4.6L and 5.4L V8, and 6.8L V10 engines - see product description below for a detailed list of applications
- Tool performs the same function as Ford No. 303-380 (T91P-6256-A)
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 8.30 x 5.30 x 1.80 inches | Weight: 0.66 Pounds
Warranty: Limited lifetime warranty
See On Amazon #7
OTC (6680) Cam Tool Set - Ford 3.9L 4V Engine
Asin: B00JZXA4TK | Model: 6680 | PartNumber: 6680 | Ean: 0731413574696 | UPC: 731413574696
Item Package Weight - 2.42 Pounds.
Product Type - Auto Accessory.
Item Package Quantity - 1.
Item Package Dimension: 10.23L X 7.40W X 2.59H Inches.
Features
- Designed to service Ford 3.9L 4V V8 engines used in 2000-2006 Lincoln LS cars
- Item Package Dimension: 10.23L x 7.40W x 2.59H inches
- Item Package Weight - 2.42 Pounds
- Item Package Quantity - 1
- Product Type - AUTO ACCESSORY
- See more on Amazon...
First Available: 05/23/2014
Brand: OTC | Manufacturer: OTC
Dimensions: 2.20 x 9.20 x 11.30 Inches | Weight: 3.60 Grams
Warranty: Limited Lifetime
See On Amazon #8
OTC 6471 Camshaft Sensor Synchronizer Tool for Select 1993-1995 Ford and Mercury Vehicles
Asin: B000O3I636 | Model: 6471 | PartNumber: 6471 | Ean: 0731413037542 | UPC: 731413037542
Correctly Aligns Shaft And Housing For Insertion Into Engine Once Engine Has Been Rotated To Top Dead Center On The No. 1 Cylinder's Compression Stroke.
Same As Ford No. 303-453 (T93p-12200-A); Includes Instructions For Proper Use Of Tool.
For Use On The Following Vehicles: 1993-95 3.0L V6 Ford Taurus And Mercury Sable.
This Tool Is A 'Must Have' For Ensuring Correct Installation Of The Cam Sensor Housing.
Features
- OTC Ford/Mercury Camshaft Sensor Synchronizer Tool
- This tool is a 'must have' for ensuring correct installation of the cam sensor housing
- Correctly aligns shaft and housing for insertion into engine once engine has been rotated to top dead center on the no. 1 cylinder's compression stroke
- For use on the following vehicles: 1993-95 3.0L V6 Ford Taurus and Mercury Sable
- Same as Ford No. 303-453 (T93P-12200-A); includes instructions for proper use of tool
- See more on Amazon...
First Available: 08/25/2011
Brand: OTC | Manufacturer: OTC
Dimensions: 1.00 x 7.70 x 4.20 Inches | Weight: 0.10 Pounds
Warranty: Limited Lifetime Warranty
See On Amazon #9
OTC Tools 6746 Timing Chain Holding Tool
Asin: B07CVJ5TQH | Model: 6746 | PartNumber: 6746 | Ean: 0731413589492 | UPC: 731413589492
Package Weight: 0.408 Kilograms.
Country Of Origin : United States.
Package Dimensions: 9.652 H X 8.636 L X 9.144 W (Centimetres).
Features
- Retains the timing chain position relative to the crankshaft position
- Package Dimensions: 9.652 H x 8.636 L x 9.144 W (centimetres)
- Package Weight: 0.408 kilograms
- Country of Origin : United States
- See more on Amazon...
First Available: 05/04/2018
Brand: OTC | Manufacturer: OTC Tools
Weight: 0.80 pounds
See On Amazon #10
OTC 6473 Camshaft Sensor Synchronizer Tool for Select 1998 - 2008 Ford and Mercury Vehicles
Asin: B000RFDGEK | Model: 6473 | PartNumber: 6473 | Ean: 0731413037566 | UPC: 731413037566
Correctly Aligns Shaft And Housing For Insertion Into Engine Once Engine Has Been Rotated To Top Dead Center On The No. 1 Cylinder's Compression Stroke.
Same As Ford No. 303-589; Includes Instructions For Proper Use Of Tool.
For Use On The Following Vehicles: 1998-08 3.0L V6 Ranger; 1998-05 3.0L V6 Sable, Taurus (Vin U); 1998-06 3.0L V6 Sable, Taurus (Vin Z); 1998-03 3.0L V6 Windstar.
This High Quality Metal Tool Is A 'Must Have' For Ensuring Correct Installation Of The Cam Sensor Housing.
Features
- OTC Ford/Mercury Camshaft Sensor Synchronizer Tool
- This high quality metal tool is a 'must have' for ensuring correct installation of the cam sensor housing
- Correctly aligns shaft and housing for insertion into engine once engine has been rotated to top dead center on the no. 1 cylinder's compression stroke
- For use on the following vehicles: 1998-08 3.0L V6 Ranger; 1998-05 3.0L V6 Sable, Taurus (VIN U); 1998-06 3.0L V6 Sable, Taurus (VIN Z); 1998-03 3.0L V6 Windstar
- Same as Ford No. 303-589; includes instructions for proper use of tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.20 x 7.00 x 4.50 inches | Weight: 0.30 Pounds
Warranty: Limited lifetime warranty
See On Amazon #11
OTC 6682 Ford 3.5L & 3.7L 4V Cam Tool Set
Asin: B00JZXABO8 | Model: 6682 | PartNumber: 6682 | Ean: 0731413574719 | UPC: 731413574719
For Use On: 07-14 3.5L Edge; 11-14 4.0L Edge; 11-14 3.5L Explorer, F-150, 11-14 3.7L F-150, Mkx; 11-12 4.0L F-150, Mkx, Mustang, 12-14 3.5L Flex, 10-12 3.5L Fusion Hybrid.
Includes Detailed Instructions With Drawings For Both The Cam And Timing Tensioner Tools; Rugged Blow Molded Plastic Storage Case Keeps Tools Protected And Contained When Not In Use.
07-11 3.5L Milan; 10-14 3.5L Mks, Mkt, 09-14 3.7L Mks, 10-14 3.7L Mkt, 07-12 3.5L Mkx, Mkz; 13-14 3.7L Mkz; 11-14 3.7L Mustang; 08-12 3.5L Sable; 08-14 3.5L Taurus, Taurus X.
Set Contains A Pair Of Cam Locks To Hold All Four Camshafts At Tdc Along With A Timing Chain Tensioner Hold Down Tool That Releases The Tensioner For Timing Chain Removal.
Features
- OTC's Ford 3.5L, 3.7L, and 4.0L 4V Cam Tool Set is the ideal solution for engine service procedures involving camshafts or other timing components that require camshafts be held stationary
- Set contains a pair of Cam Locks to hold all four camshafts at TDC along with a Timing Chain Tensioner Hold Down Tool that releases the tensioner for timing chain removal
- For use on: 07-14 3.5L Edge; 11-14 4.0L Edge; 11-14 3.5L Explorer, F-150, 11-14 3.7L F-150, MKX; 11-12 4.0L F-150, MKX, Mustang, 12-14 3.5L Flex, 10-12 3.5L Fusion Hybrid
- 07-11 3.5L Milan; 10-14 3.5L MKS, MKT, 09-14 3.7L MKS, 10-14 3.7L MKT, 07-12 3.5L MKX, MKZ; 13-14 3.7L MKZ; 11-14 3.7L Mustang; 08-12 3.5L Sable; 08-14 3.5L Taurus, Taurus X
- Includes detailed instructions with drawings for both the cam and timing tensioner tools; rugged blow molded plastic storage case keeps tools protected and contained when not in use
- See more on Amazon...
First Available: 05/23/2014
Brand: OTC | Manufacturer: OTC
Dimensions: 4.00 x 9.00 x 4.00 inches
Warranty: Limited Lifetime
See On Amazon #12
OTC Tools 5882 Cam Gear Alignment Tool for Detroit Diesel Series 60 Engines
Asin: B07ZRPKZVV | Model: 5882 | PartNumber: 5882 | Ean: 0731413590375 | UPC: 731413590375
For Use On Detroit Diesel Series 60 Engines.
Similar To J-45946; Made In The Usa.
Crafted From High-Grade Materials To Ensure Quality Performance Over The Lifetime Of The Tool.
Pin On The Tool Fits Into The Cam Timing Hole For Proper Alignment.
Features
- OTC's Cam Gear Alignment Tool is used to properly align the cam gear during camshaft assembly installation
- Pin on the tool fits into the cam timing hole for proper alignment
- For use on Detroit Diesel Series 60 engines
- Crafted from high-grade materials to ensure quality performance over the lifetime of the tool
- Similar to J-45946; Made in the USA
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 6.00 x 10.00 x 8.00 inches
Warranty: Per Contract with Amazon
See On Amazon #13
OTC (6475) Crankshaft TDC Timing Pin for Ford
Asin: B002YKI7KO | Model: 6475 | PartNumber: 6475 | Ean: 0731413037580 | UPC: 731413037580
Same As Ford Number 303-574 T97p-6000-A.
1997 - 2002 Ford Contour/Mercury Mystique With 2.0L 4 Cyl Dohc Zetec Engine With Variable Cam Timing.
Features
- Cam Tools ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs
- 1997 - 2002 Ford Contour/Mercury Mystique with 2.0L 4 cyl DOHC Zetec engine with variable cam timing
- Same as Ford number 303-574 T97P-6000-A
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.30 x 7.40 x 3.30 Inches | Weight: 0.19 Pounds
Warranty: Limited lifetime warranty
See On Amazon #14
OTC 6467 Camshaft Sensor Synchronizer Tool for Select 1989 - 1998 Ford and Mercury Vehicles
Asin: B000IHJZP6 | Model: 6467 | PartNumber: 6467 | Ean: 0731413037504 | UPC: 731413037504
Correctly Aligns Shaft And Housing For Insertion Into Engine Once Engine Has Been Rotated To 26 Degrees After Top Dead Center On The No. 1 Cylinder's Compression Stroke.
Same As Ford No. 303-358 (T89p-12200-A); Includes Instructions For Proper Use Of Tool.
For Use On The Following Vehicles: 1990 -97 3.8L V6 Thunderbird/Cougar, 1989-95 3.8L V6 Supercharged Thunderbird/Cougar, 1994-98 3.8L V6 Mustang, 1998 3.8L V6 Windstar.
This Tool Is A 'Must Have' For Ensuring Correct Installation Of The Cam Sensor Housing.
Features
- OTC Ford/Mercury Camshaft Sensor Synchronizer Tool
- This tool is a 'must have' for ensuring correct installation of the cam sensor housing
- Correctly aligns shaft and housing for insertion into engine once engine has been rotated to 26 degrees after top dead center on the no. 1 cylinder's compression stroke
- For use on the following vehicles: 1990 -97 3.8L V6 Thunderbird/Cougar, 1989-95 3.8L V6 Supercharged Thunderbird/Cougar, 1994-98 3.8L V6 Mustang, 1998 3.8L V6 Windstar
- Same as Ford No. 303-358 (T89P-12200-A); includes instructions for proper use of tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.80 x 4.80 x 2.30 inches | Weight: 0.10 Pounds
Warranty: Limited lifetime warranty
See On Amazon #15
OTC (6685) Cam Tool Set - In-Line 4-Cylinder Cam Tool Set
Asin: B007QV0YL6 | Model: 6685 | PartNumber: 6685 | Ean: 0731413543722 | UPC: 731413543722
Easier To Use Than The Original Oe Essential Tools.
Designed To Save Time When Servicing Gm 4-Cylinder Engines.
Features
- Comprehensive tool kit
- Designed to save time when servicing GM 4-cylinder engines
- Easier to use than the original OE essential tools
- See more on Amazon...
First Available: 09/13/2013
Brand: OTC | Manufacturer: OTC
Dimensions: 4.90 x 30.30 x 11.70 Inches | Weight: 18.10 pounds
Warranty: Limited Lifetime Warranty
See On Amazon #16
OTC 6486A Cam Tool Set for Ford 4V Engine
Asin: B00IYO6OSG | Model: 6486A | PartNumber: 6486A | Ean: 0731413574733 | UPC: 731413574733
Ford 2.3L 4V L4 Engines Used In 2005-2008 Escape Hybrid And Mariner Hybrid.
Ford 2.5L 4V L4 Engines Used In 2009-2012 Escaper And Mariner, 2010-2012 Fusion And Fusion Hybrid And 2011-2012 Mkz.
Ford 2.0L 4V L4 Engines Used In 1994-2012 Multiple Vehicle Platforms.
Features
- 3 cam tools for working on Ford engines
- Ford 2.0L 4V L4 engines used in 1994-2012 multiple vehicle platforms
- Ford 2.3L 4V L4 engines used in 2005-2008 Escape Hybrid and Mariner Hybrid
- Ford 2.5L 4V L4 engines used in 2009-2012 Escaper and Mariner, 2010-2012 Fusion and Fusion Hybrid and 2011-2012 MKZ
- See more on Amazon...
First Available: 05/23/2014
Brand: OTC | Manufacturer: OTC
Dimensions: 4.00 x 4.00 x 3.00 inches | Weight: 1.00 Pounds
Warranty: Limited Lifetime
See On Amazon #17
OTC 6690-1 Cam Update Tool Kit for Ford 3V & 4V Engines - 2004 and Up
Asin: B00J5PVGW2 | Model: 6690-1 | PartNumber: 6690-1 | Ean: 0731413574689 | UPC: 731413574689
Included Tools Are For Use On 2004 And Later Vehicles Equipped With L4, V6, V8, V10 Engines With 3V And 4V Valve Configurations.
Rugged Blow Molded Plastic Storage Case Keeps Tools Protected And Contained When Not In Use; Case Is Embossed With Tool Numbers For Easy Placement Of Tools Into The Case.
Included Reference Manual Walks You Through The Cam Timing Procedures With Helpful Tips & Calls Out The Adapters Used; Manual Reference Numbers Are Etched On Each Adapter For Ease Of Identification.
These Cam Tools Ensure Correct Cam Timing When Servicing Timing Belts, Chains, Head Gaskets, Or Other Valve Train Repairs.
Features
- OTC's Ford Cam Tool Kit Update Set contains 18 tools in a rugged case that features locations for the popular 6489 Ford Cam Tools, making a complete 6690 Master Kit (6489 tools not included)
- These cam tools ensure correct cam timing when servicing timing belts, chains, head gaskets, or other valve train repairs
- Included tools are for use on 2004 and later vehicles equipped with L4, V6, V8, V10 engines with 3V and 4V valve configurations
- Included reference manual walks you through the cam timing procedures with helpful tips & calls out the adapters used; manual reference numbers are etched on each adapter for ease of identification
- Rugged blow molded plastic storage case keeps tools protected and contained when not in use; case is embossed with tool numbers for easy placement of tools into the case
- See more on Amazon...
First Available: 05/23/2014
Brand: OTC | Manufacturer: OTC
Dimensions: 14.00 x 28.00 x 19.00 inches | Weight: 23.00 Pounds
Warranty: Limited Lifetime
See On Amazon #18
OTC 6470 Camshaft Sensor Synchronizer Tool for Select 1999 - 2007 Ford and Mercury Vehicles
Asin: B000RFDGF4 | Model: 6470 | PartNumber: 6470 | Ean: 0731413037535 | UPC: 731413037535
Correctly Aligns Shaft And Housing For Insertion Into Engine Once Engine Has Been Rotated To Top Dead Center On The No. 1 Cylinder's Compression Stroke.
Same As Ford No. 303-630; Includes Instructions For Proper Use Of Tool.
For Use On: 1999-02 5.0L V8 Explorer/Mountaineer; 2004-07 3.9L V6 Freestar (Vin 6); 2004 3.9L V6 Monterey (Vin 6); 1999-04 3.8L V6 Mustang; 1999-03 3.8L V6 Windstar.
This High Quality Metal Tool Is A 'Must Have' For Ensuring Correct Installation Of The Cam Sensor Housing.
Features
- OTC Ford/Mercury Camshaft Sensor Synchronizer Tool
- This high quality metal tool is a 'must have' for ensuring correct installation of the cam sensor housing
- Correctly aligns shaft and housing for insertion into engine once engine has been rotated to top dead center on the no. 1 cylinder's compression stroke
- For use on: 1999-02 5.0L V8 Explorer/Mountaineer; 2004-07 3.9L V6 Freestar (VIN 6); 2004 3.9L V6 Monterey (VIN 6); 1999-04 3.8L V6 Mustang; 1999-03 3.8L V6 Windstar
- Same as Ford No. 303-630; includes instructions for proper use of tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 1.40 x 7.70 x 4.20 inches | Weight: 0.35 pounds
Warranty: Limited lifetime warranty
See On Amazon #19
OTC (6686) Cam Tool Set - GM NorthStar V8
Asin: B000TRJ7US | Model: 6686 | PartNumber: 6686 | Ean: 0731413417450 | UPC: 731413417450
Cylinder Heads And Valve Trains Tend To Wear Out Somewhere Between 80000 To 120000 Miles.
Over One Million Northstar V8s Have Been Sold Since 1993.
Features
- Kit is indispensable for quickly and correctly servicing GM NorthStar 4.0L and 4.6L V8 engines
- Over one million NorthStar V8s have been sold since 1993
- Cylinder heads and valve trains tend to wear out somewhere between 80000 to 120000 miles
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 4.80 x 26.30 x 15.90 inches | Weight: 5.10 Pounds
Warranty: Limited lifetime warranty
See On Amazon
Looking For Something Else?
Search