CNC Spindle Motor Kits, Square 110V 1.5KW Air Cooled Spindle Motor, 1.5KW VDF, 2.75Inch bruches, 40Inch Electric Wire,13 pcs ER11 Collets for CNC Router Engraving Milling Machine
Asin: B06Y42QL2R | Ean: 0713839364167 | UPC: 713839364167
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.✅Vfd Inverter: Power: 1.5Kw; Input Voltage: 110V; Output Voltage: 110V; Input Phase: 1 Phase Or 3 Phase; Output Phase: 3 Phase; Input Frequency: 50 Hz; Output Frequency: 0-400 Hz; Output Current: 5A. Three Anti-Paint Protection Lines, Improve And Extend The Life Of The Fuselage; Dc Cooling Fan Low Noise, Large Air Volume..
✅Support: We Offer 1 Year Warranty. If You Get Stuck, Contact Us With Any Questions That Arise, Our Customer Service Team Are Waiting For Helping You Within 24 Hours And We Promise We Will Provide A 100% Satisfied Solution For You!.
✅Package Include: Square Spindle Motor, Inverter, Er11 Collet; Brush; Drill Bits, Electric Wire. Our Air Cooled Spindle Is Widely Engrave For Wood, Normal Pcb, Pvc, Plastic, Gold, Silver, Copper, Etc And Is Widely Applicable To Engraving Machines, Mills, Car Hoists, Pumps, Lathes, Conveyors, And Many More..
✅Air Cooled Spindle: High-Speed Electric Main Bearings Used In All C Class High-Speed Angular Contact Ball Bearings, Axial Pre-Load Feature, Improved Support Stiffness And Live Spindle Grinding Accuracy Under High-Speed Rotation.The Obvious Advantages Are Low Noise, Upgraded Efficiency, Better Heat Dissipation Effect And Extended Service Life..
Features
- Technical Parameters: Spec: 3.13-9.4inin (Diameter: 5.4cm x Length: 23.9cm); Power: 1.5 KW; Voltage: 110V; Current: 8A; Collet Size: ER11; Bearings: 4 bearings, 2x7005C P4 DT, 2x7003C P4 DT, increase spindle life.Frequency: 400 Hz; Speed: 0-24000 R/min; Runout off: less than 0.0015 mm; Weight: 7.05 ib. Mainly used for engraving machine or used with frequency converter.
- Air Cooled Spindle: High-speed electric main bearings used in all C class high-speed angular contact ball bearings, axial pre-load feature, improved support stiffness and live spindle grinding accuracy under high-speed rotation.The obvious advantages are low noise, upgraded efficiency, better heat dissipation effect and extended service life.
- VFD Inverter: Power: 1.5KW; Input Voltage: 110V; Output Voltage: 110V; Input Phase: 1 phase or 3 phase; Output Phase: 3 phase; Input Frequency: 50 Hz; Output Frequency: 0-400 Hz; Output Current: 5A. Three anti-paint protection lines, improve and extend the life of the fuselage; DC cooling fan low noise, large air volume.
- Package include: Square Spindle Motor, Inverter, ER11 Collet; Brush; Drill Bits, electric wire. Our air cooled spindle is widely engrave for wood, normal PCB, PVC, plastic, gold, silver, copper, etc and is widely applicable to engraving machines, mills, car hoists, pumps, lathes, conveyors, and many more.
- Support: We offer 1 year warranty. If you get stuck, contact us with any questions that arise, our customer service team are waiting for helping you within 24 hours and we promise we will provide a 100% satisfied solution for you!
- See more on Amazon...
Brand: MYSWEETY | Manufacturer: MYSWEETY
See On Amazon Similar To CNC Spindle Motor Kits Square
#1
Genmitsu GS-775M 20000RPM 775 CNC Spindle Motor with 5mm ER11 Collet Set, CNC 3018 Upgraded Accessories, DC 24V, High Power, Noise Suppression, Electrical DC Motor for 3018 CNC Router Machine
Asin: B08DTHDSMV | Model: MR775 | PartNumber: MR775 | Ean: 0816550023723 | UPC: 816550023723
Pre-Installed Motor Noise Suppression Pcb Provides Enhanced Performance..
Double Ball Bearing Brush. Cw/Ccw Rotation..
It's Compatible With All 3018 Series Cnc Router. Applied To Lathes, Mills, Car Hoists, Pumps & Conveyors, Etc..
Experience A Quick And Easy Upgrade For Your Genmitsu Desktop Cnc..
Features
- DC: 24V. Speed: 20000/min.
- Experience a quick and easy upgrade for your Genmitsu Desktop CNC.
- Pre-installed motor noise suppression PCB provides enhanced performance.
- It's compatible with All 3018 Series CNC router. Applied to lathes, mills, car hoists, pumps & conveyors, etc.
- Double ball bearing brush. CW/CCW rotation.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 1.03 Pounds
See On Amazon #2
VFD CNC Spindle Motor Kits 220V 2.2KW CNC VFD+220V 2.2KW 4bearings 400hz 24000rpm 80mm Water Cooled Spindle Motor+220V 75W Water Pump+80mm Motor Clamp Mount+5m Water Pipe (Factory Direct Sales)
Asin: B078J5CXP3 | Ean: 0724509858589 | UPC: 724509858589
【Package Include】1 X 220V-2.2Kw Vfd, 1 X2.2Kw Φ80mm 24000Rpm Er20 Spindle.1 X 220V-75W Water Pump ,1 X 80Mm Motor Clamp,1 X 5M Horse.
【Warranty】One Year Warranty (The Spindle Is Half A Year).If There Is An Alarm In The Product And You Do Not Know How To Operate, Please Contact The Seller.
【Wide Range Of Applications】The Spindle Motor Applied To: Wood Carving/Engraving Machine, Advertisement Engraving Machine,Cnc Machine, Small Sized Processing Center, High Speed Centrifuge Etc..
【Parameter Settings】All Basic Parameterhave Been Set Up, The Customer Can Directly Connect And Start When Receiving The Product.
Features
- Connection way The package only supports AC 200V-240V 1 or 3 phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor pin1=U,pin2=V,pin3=W,pin4=ground
- Parameter Settings All basic parameterhave been set up, the customer can directly connect and start when receiving the product
- Package Include 1 x 220V-2.2KW VFD, 1 x2.2KW 80mm 24000RPM ER20 Spindle.1 x 220V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m horse
- Wide range of applications The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc.
- Warranty one year warranty (The spindle is half a year).If there is an alarm in the product and you do not know how to operate, please contact the seller
- See more on Amazon...
Brand: HY HUANYANG | Manufacturer: Huanyang Electrical
Dimensions: 9.50 x 171.00 x 17.50 inches | Weight: 21.00 Pounds
See On Amazon #3
RATTMMOTOR 500W CNC Air Cooled Spindle Motor ER11 12000RPM + Input Voltage AC110V-220V Speed Controller with Power Supply + 52mm Clamp for CNC Router Milling Machine
Asin: B07ZHFV4N5 | Ean: 0769135311916 | UPC: 769135311916
Adopt Pulse Width Technology To Make The Speed More Stable, And The Speed Is High Under Low Speed..
Note: This Motor Has Quiet Operation, Small Volume And High Speed, And The Rear End Of The Motor Is Reinforced With A Cooling Fan, Which Can Be Safely Worked For A Long Time!.
With Overcurrent Protection Cut-Off Device To Make Performance More Reliable; With A Soft Start Device To Eliminate Motor Starting Current Is Too Large..
Speed Controller-- Armature Output Voltage: Dc0 ~ 100V Adjustable; Input Voltage: Ac100-Ac220v±10% Global Voltage 50/60Hz(User Can Change The Power Supply To 110V According To Their Needs); Current Limit: 6A; Wiring: Terminal Type (Convenient And Fast)..
Features
- Air Cooled Spindle-- Power: 500W; Idling Speed: 2000-12000r/min; Torque 0.5NM; Diameter: 52mm.
- Speed Controller-- Armature output voltage: DC0 ~ 100V adjustable; Input Voltage: AC100-AC220V 10% Global voltage 50/60Hz(User can change the power supply to 110V according to their needs); Current Limit: 6A; Wiring: Terminal type (Convenient and fast).
- Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
- With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
- Note: This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 2.20 x 7.83 Inches | Weight: 3.68 pounds
See On Amazon #4
FoxAlien CNC Upgrade Kit 300W DC Spindle Milling Motor for Masuter, Masuter Pro, 3018-SE V2 CNC Router Engraving Machine with Integrated Control Box Speed Adjustable
Asin: B08N68DLFC | Ean: 0778107042956 | UPC: 778107042956
It Has A Power Switch And Speed Adjust Button For Convenient Operation. Spindle Speed Can Be Adjusted Manually..
It Comes With A 1/8” Er11 Collet In The Spindle..
300W Spindle Can Handle Hard Material More Easily Such As Aluminum And Copper. It Also Improves Working Efficiency..
The Default Input Voltage Is 110V. The Power Supply Output Is 48V. The Power Supply Is Integrated Into A Control Box, Which Is Safer And Easier To Clean. (If You Need To Use In 220V, Pls Contact Us)..
Features
- This upgrade kit is designed for FoxAlien Mastuer Pro, Masuter 4040, and 3018-SE V2 CNC router machines. The 300W spindle can directly fit into the spindle clamp of 3018-SE V2. No need to interchange other clamp.
- The default input voltage is 110V. The power supply output is 48V. The power supply is integrated into a control box, which is safer and easier to clean. (If you need to use in 220V, pls contact us).
- It has a power switch and speed adjust button for convenient operation. Spindle speed can be adjusted manually.
- 300W spindle can handle hard material more easily such as aluminum and copper. It also improves working efficiency.
- It comes with a 1/8 ER11 collet in the spindle.
- See more on Amazon...
Brand: FoxAlien | Manufacturer: FoxAlien
See On Amazon #5
CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving
Asin: B01LNBOCDA | Model: 500W | PartNumber: 500W | Ean: 0713839365553 | UPC: 713839365553
🛠️【Speed Power Switch】- Input Voltage: Ac110v/220V, 50/60Hz. Output Current Peak: 6A. Output Voltage: Dc0-100V. Please Install In The Place That Is Draughty, No Dramatic Impact, No Vibration, No Explosion Hazard Medium, No Conductive Metal Particle..
🛠️【Er11 Collet Chuck】- 13Pcs Er11 Collet Set Gripping Range: 1Mm To 7Mm(1Mm,1.5Mm,2Mm,2.5Mm,3Mm,3.5Mm,4Mm,4.5Mm,5Mm,5.5Mm,6Mm,6.5Mm,7Mm). Run-Out Tolerance 0.01Mm. For Cnc Milling Lathe Tool & Work Holding Engraving Machine..
🛠️【 52Mm Mount Bracket】- Made Of High Quality Cast Aluminum, This Spindle Motor Bracket Clamp Is Strong And Sturdy. Diameter: 52Mm, Chuck Portion Length: 45Mm, Chuck Portion Diameter: 16Mm..
🛠️【500W Cnc Spindle Motor】- Operating Voltage: 100Vdc, Power: 500W, Input: Ac110v, Speed: Up To Idle Up To 12,000 Rev / Min, Torque: 5000G/Cm. Insulation Resistance:> 2 Megohms, Dielectric Strength: 400V. Motor Length: 200Mm, High Precision Spindle Run Out 0.01-0.03..
Features
- CNC Spindle kit 500W - 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free).
- 500W CNC Spindle motor - Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03.
- Speed Power Switch - Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle.
- 52mm Mount Bracket - Made of high quality cast aluminum, this spindle motor bracket clamp is strong and Sturdy. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm.
- ER11 Collet Chuck - 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine.
- See more on Amazon...
Brand: MYSWEETY | Manufacturer: Mysweety
Dimensions: 7.48 x 11.42 x 6.69 inches
See On Amazon #6
CNC Spindle Motor Kits, 110V 1.5KW Air Cooled Spindle CNC Spindle +110V 1.5KW VFD+ 65mm Clamp Mount +Collet Set ER11+ Drill bits+ Wires+ Wrenches for CNC Router Machine
Asin: B0BF5R3LNC | Model: ytx-1.5kw air kit | PartNumber: ytx-1.5kw air kit
【Spindle Advantage 】- Authentic 4Pcs Upgraded Steel Bearings Significantly Extend Working Life 3 Times Longer Than Ordinary Spindle Motor; Advanced Dynamic Balance Technology Effectively Reduce The Noise And Increase Stability In The Working Process; Runout Off Less Than 0.005Mm That 10 Times Precision Beyond Normal Spindle Motor..
【Warranty Assurance】-We Have 20 Years Manufacturing Experience , Pls Contact Us For Any Question Or Problem..
【Wide Application】-Kinds Of Drilling And Engraving Materials , Such As Plastics, Soft Aluminum,Brass, Acrylics, Pvc, Pcb, Wood,Plywood, Nylon..
【Easy And Fast To Assemble 】-The Vfd Had Been Pre-Programmed For Basic Parameters , You Don't Need To Make Extra Setting Up.We Offer Fully Complete Accessories Including Pre-Soldered Aviation Wire And Power Wire, It Will Take Just 5 Minutes To Install All And Make All Functions Running..
Features
- PACKAGE LIST -1x110V 1.5KW 65mm air Cooled Spindle Motor +1x110V 1.5KW VFD+ 1x 65mm CNC Clamp Mount +13x ER11 Collets(1mm-7mm) +10x CNC Router Bits+ 1x aviation wire(We offer 2 meters 18AWG wire in this kit, if you need longer wire, pls buy it in our store)+1xpower wire+2x wrenches
- EASY AND FAST TO ASSEMBLE -The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire and power wire, It will take just 5 minutes to install all and make all functions running.
- SPINDLE ADVANTAGE - Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond normal spindle motor.
- WIDE APPLICATION -Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
- WARRANTY ASSURANCE -We have 20 years manufacturing experience , pls contact us for any question or problem.
- See more on Amazon...
Brand: Zhong Hua Jiang | Manufacturer: huajiang
See On Amazon #7
RATTMMOTOR DC Motor CNC 775 Spindle Motor 100W 12-24VDC 20000RMP + ER11 Collet for DIY Mini CNC Router 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro Engraving Router Milling Machine
Asin: B08FD2PJHK | Model: CNC-775 | PartNumber: CNC-775 | Ean: 0619191686209 | UPC: 619191686209
Large Torque, Low Friction And Stable Operation..
Package Include: 1 ×775 Spindle Motor Er11+ 2×Wrench + 1×Cables.
Mainly For Diy Mini Cnc Wood Router Machine, Such As Cnc 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro 2418.
Double Ball Bearings Have Low Noise..
Features
- Front and rear double ball bearings, universal DC 12V-24V voltage.
- Double ball bearings have low noise.
- Large torque, low friction and stable operation.
- Mainly for DIY MINI CNC wood router machine, such as CNC 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro 2418
- Package include: 1 775 Spindle motor ER11+ 2 wrench + 1 cables
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 1.75 x 0.00 x 0.00 inches | Weight: 0.99 Pounds
See On Amazon #8
RATTMMOTOR 500W Spindle Motor CNC Air Cooled Spindle Motor ER11 12-100VDC 0.5NM 12000RPM + 52mm Spindle Motor Mount Clamp for CNC Router Milling Machine
Asin: B09PR6QTK3 | Model: RTM5.2 | PartNumber: RTM5.2
Note: This Motor Has Quiet Operation, Small Volume And High Speed, And The Rear End Of The Motor Is Reinforced With A Cooling Fan, Which Can Be Safely Worked For A Long Time!.
52Mm Diameter Spindle Motor Mount,Compared With The Aluminium Profile Fixture,The Accuracy Is Much Higher , And It Is Hard To Deform..
Can Be Used For Solid Wood Pcb Engraving, Drilling, Etc..
Idling Speed: 2000-12000R/Min; Torque：0.5Nm; Chuck Part Length: 45Mm; Diameter: 52Mm; Insulation Resistance: >2 Megohms; Insulation Dielectric Strength: 400V; Spindle Radial Runout 0.01-0.03 High Precision..
Features
- Power: 500W, Air cooling method, working voltage: 12-100VDC.
- Idling Speed: 2000-12000r/min; Torque 0.5NM; Chuck part length: 45MM; Diameter: 52mm; Insulation resistance: >2 megohms; Insulation dielectric strength: 400V; Spindle radial runout 0.01-0.03 high precision.
- Note: This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
- Can be used for solid wood PCB engraving, drilling, etc.
- 52mm Diameter spindle motor mount,compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 2.20 x 0.01 x 0.00 inches | Weight: 2.54 pounds
See On Amazon #9
RATTMMOTOR VFD CNC Spindle Motor Kits 2.2KW 220V Water Cooled Spindle Motor 80mm ER20 400Hz 24000RPM+VFD Drive Inverter 3HP+Motor Mount Clamp+14pcs ER20 Collet+80W Water Pump for CNC Router
Asin: B073TRP92V | Model: GDZ80-2.2 | PartNumber: GDZ80-2.2 | Ean: 0785004503176 | UPC: 785004503176
【80Mm Spindle Motor Mount】Material Is Aluminum,Surface Sandblasted. Compared With The Aluminium Profile Fixture,The Accuracy Is Much Eavier, Much Higher, And It Is Hard To Deform. Fit For Cnc 80Mm Diameter Spindle Motor..
【How To Connect Spindle Motor And Vfd】The Spindle Motor's Aviation Plug Marked With Number 1, 2, 3, 4. Number 1, 2, 3 Port Are Connected Separately With Inverter's Port U, V, W. Number 4 Is The Ground Wire, No Wiring Is Required..
【1 Year Warranty】We Offer 1 Year Warranty, If You Have Any Questions About The Product, Please Contact The Seller For A Satisfactory Solution..
【80W 220V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 220V. Also Suitable For 0.8Kw, 1.5Kw, 2.2Kw, 3Kw And Other High Speed Cnc Water Cooled Spindle Motor. Please Remind That The Submersible Pump Should Be Completely Immersed In Water When It Is Working To Ensure That The Submersible Pump Has A Certain Degree Of Cooling..
【2.2Kw Vfd Parameters】Control Model: Spwn. Power: 2.2Kw. Input：1 Or 3 Phase 220V 0-50Hz/60Hz. Output：3 Phase 220V 0-400Hz. Under Normal Circumstances, The Parameters Of The Inverter Have Been Set And Can Be Directly Connected For Use. (Or Please Follow The Instructions To Set The Parameters)..
Features
- 2.2KW Spindle Motor : This is a 220V-2.2KW water-cooled 8A 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
- 2.2KW VFD Parameters Control Model: SPWN. Power: 2.2KW. Input 1 or 3 phase 220V 0-50Hz/60Hz. Output 3 phase 220V 0-400Hz. Under normal circumstances, the parameters of the inverter have been set and can be directly connected for use. (Or please follow the instructions to set the parameters).
- 80mm Spindle Motor Mount Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
- 80W 220V Water Pump Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 220V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
- How to Connect Spindle Motor and VFD The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
- 1 Year Warranty We offer 1 year warranty, if you have any questions about the product, please contact the seller for a satisfactory solution.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Chang Sheng
Dimensions: 31.50 x 83.46 x 31.50 inches | Weight: 10.21 pounds
See On Amazon #10
LCRHLCNC 110v Spindle Motor Kit 1.5Kw Square Air Cooled Spindle Motor 24000Rpm 400Hz VFD Variable Frequency Drive 7 pcs ER11 Collets 1-7mm for CNC Router Engraving Milling Machine (1.5KW-110V)
Asin: B0B24Q2WYX
Main Application: Engrave For Wood, Bamboo, Normal Pcb, Pvc, Pmma, Plastic, Duotone Board(Abs)And Etc Nonmetal, Also Can Engrave On Gold, Silver, Copper, Aluminium, Pb Etc Soft Metal Surface Working..
Notice：Don't Need To Set Vfd，Please Use It Directly.
High-Speed Electric Main Bearings Used In All C Class High-Speed Angular Contact Ball Bearings, Axial Pre-Load Feature, Improved Support Stiffness And Live Spindle Grinding Accuracy Under High-Speed Rotation..
Specification Property：Run Out Off: Less Than 0.005Mm,Spindle Speed:0-24000Rpm, Ac Inverters 50/60Hz Single Phase / 3 Phase ，0-400Hz，Inverter Input：Single Phase Or Three Phase，Inverter Inout：Three Phase，Spindle Motor Input：Three Phase，Bearing Is P4 Grade, 2X7005c P4 Dt, 2X7003c P4 Dt, Increase Spindle Life.
Features
- Package include: 1x 110V/1.5KW Square Spindle Motor+1x 1.5KW/110V YL INVERTER+7x ER11 Collets
- Specification property Run out off: less than 0.005mm,spindle speed:0-24000rpm, AC Inverters 50/60hz single phase / 3 phase 0-400Hz Inverter input single phase or Three phase Inverter inout Three phase spindle motor input Three phase Bearing is P4 grade, 2x7005C P4 DT, 2x7003C P4 DT, increase spindle life
- Main Application: engrave for wood, bamboo, normal PCB, PVC, PMMA, plastic, duotone board(ABS)and etc nonmetal, also can engrave on gold, silver, copper, aluminium, Pb etc soft metal surface working.
- High-speed electric main bearings used in all C class high-speed angular contact ball bearings, axial pre-load feature, improved support stiffness and live spindle grinding accuracy under high-speed rotation.
- Notice don't need to set VFD please use it directly
- See more on Amazon...
Brand: LCRHLCNC | Manufacturer: Lishui Hengli Automation Technology Co., Ltd
Weight: 5.40 Pounds
Warranty: 90days
See On Amazon #11
RATTMMOTOR ER11 Spindle Motor 300W Air-Cooled Spindle Motor 52mm 12-48VDC 12000RPM 400mN.m for DIY CNC Router Engraver Milling Machine
Asin: B08GKK77W8 | Model: RTMER11 | PartNumber: RTMER11 | Ean: 0619191721023 | UPC: 619191721023
Speed: Idling Speed Can Reach 12000Rpm.
Applications: Can Be Used For Engraving Wood/Plastic/Acrylic/ Pvc/Pcb/Carbon Fiber/Density Board And Other Materials..
Frequency: 0-400Hz； Torque: 400Mn.M.
Diameter: 52Mm; Total Length Of Motor:175Mm.
Features
- Power: 300W; Operating Voltage: 12-48VDC
- Diameter: 52mm; Total length of motor:175mm
- Speed: Idling speed can reach 12000RPM
- Frequency: 0-400Hz Torque: 400mN.m
- Applications: Can be used for engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and other materials.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 2.05 x 0.01 x 0.00 inches
See On Amazon #12
RATTMMOTOR CNC Air Cooled Spindle Motor Kit, 2.2KW Spindle Motor 220V ER20 24000RPM+2.2KW VFD 220V Inverter Single to 3 Phase Variable Frequency Drive+80mm Spindle Motor Mount for CNC Router Machine
Asin: B0785QKYT6 | Ean: 0651312401100 | UPC: 651312401100
【2.2Kw Vfd Parameters】Control Model: Spwn. Power: 2.2Kw. Input：1 Or 3 Phase 220V 0-50Hz/60Hz. Output：3 Phase 220V 0-400Hz. Communication Control: Rs-485. Vibration: Below 0.5G. Five-Digits Display And Status Indicator Lamp Display Frequency, Current, Revolution, Voltage, Counter, Temperature, Foward Or Reverse Running, Fault, Ect..
【80Mm Spindle Motor Mount】Material Is Aluminum,Surface Sandblasted. Compared With The Aluminium Profile Fixture,The Accuracy Is Much Eavier, Much Higher, And It Is Hard To Deform. Fit For Cnc 80Mm Diameter Spindle Motor..
【How To Connect Spindle Motor And Vfd】The Spindle Motor's Aviation Plug Marked With Number 1, 2, 3, 4. Number 1, 2, 3 Port Are Connected Separately With Inverter's Port U, V, W. Number 4 Is The Ground Wire, No Wiring Is Required..
【2.2Kw Spindle Motor】: ①This Is A 220V-2.2Kw Air-Cooled 8A Φ 80X195mm Spindle Motor Come With A Er20 Nut And Collet. Frequency Is 400Hz, 0.005 Accuracy And Runout Off Is Less Than 0.01Mm. ②Speed Of The Spindle Motor : 0-24000Rpm. Because It Is A High-Speed Spindle Motor, The Spindle Speed Must Not Be Lower Than 9000 Rpm During The Use Of The Spindle. It Should Be Noted That The Spindle Motor Only Can Rotate Clockwise But Not Counterclockwise..
Features
- Package Include : 1 x 2.2KW 220V Air Cooled Spindle Motor + 1 x 2.2KW VFD Inverter 220V + 1 x 80mm Spindle Motor Mount(with 3pcs screws)
- 2.2KW Spindle Motor : This is a 220V-2.2KW air-cooled 8A 80x195mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.005 accuracy and runout off is Less than 0.01mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
- 2.2KW VFD Parameters Control Model: SPWN. Power: 2.2KW. Input 1 or 3 phase 220V 0-50Hz/60Hz. Output 3 phase 220V 0-400Hz. Communication Control: RS-485. Vibration: below 0.5G. Five-Digits Display and Status Indicator Lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect.
- How to Connect Spindle Motor and VFD The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
- 80mm Spindle Motor Mount Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Chang Sheng
Dimensions: 3.15 x 3.15 x 0.01 inches | Weight: 9.10 pounds
See On Amazon #13
CNC Spindle CNC Motor 110V 1.5KW Air Cooled Spindle Motor 65mm 4 Bearings 24000RPM 400HZ for CNC Router Machine
Asin: B0BDRNTWJZ | Model: ytx-1.5kw-65-air | PartNumber: ytx-1.5kw-65-air
【Easy And Fast To Assemble 】-We Offer Pre-Soldered Aviation Wire , You Will Take 2 Minutes To Connect Spindle Motor With Vfd..
【Warranty Assurance】-We Have 20 Years Manufacturing Experience , Pls Contact Us For Any Question Or Problem. We Are Proficient In Customizing Products According To Various Requests And Applications. If You Have Special Inquiry, Pls Let Us Know..
【Wide Application】-Kinds Of Engraving And Drilling Material :Kinds Of Drilling And Engraving Materials , Such As Plastics, Soft Aluminum,Brass, Acrylics, Pvc, Pcb, Wood,Plywood, Nylon..
【Spindle Advantage 】-It Made Less Noise When Working, Authentic 4Pcs Upgraded Steel Bearings Significantly Extend Working Life 3 Times Longer Than Ordinary Spindle Motor; Advanced Dynamic Balance Technology Effectively Reduce The Noise And Increase Stability In The Working Process; Runout Off Less Than 0.005Mm That 10 Times Precision Beyond Average Spindle Motor..
Features
- BASIC INFORMATION -This spindle motor should work with VFD 110V,400HZ. 2 Poles, Collet ER11-6mm(compatible with bits between 1mm and 7mm ),Diameter 65mm Voltage: 110V ,Power:1.5KW, Frequency: 400 Hz, Current: 8A , Speed: 5000-24000 RPM, Runout off: less than 0.005 mm. Weight: 2.7kg(5.96lbs)
- SPINDLE ADVANTAGE -It made less noise when working, Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond average spindle motor.
- EASY AND FAST TO ASSEMBLE -We offer pre-soldered aviation wire , You will take 2 minutes to connect spindle motor with VFD.
- WIDE APPLICATION -Kinds of engraving and drilling material :Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
- WARRANTY ASSURANCE -We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.
- See more on Amazon...
Brand: Zhong Hua Jiang | Manufacturer: huajiang
See On Amazon #14
Genmitsu Air-Cooled 300W Brush DC Spindle Motor with 0-48V Output Adjustable Switching Power Supply, 52mm Clamp & ER11 Collet, Ideal for CNC Machining
Asin: B0819C92D2 | Model: 101-60-SPM300 | PartNumber: 101-60-SPM300 | Ean: 0816550023099 | UPC: 816550023099
Radial Run Out Of Spindle: 0.01-0.04; Speed: 3000-12000 R/Min (12V-3000R/Min, 24V-6000R/Min, 36V-9000R/Min, 48V-12000R/Min).
Note: If You Would Like To Add It On 3018 Series Cnc Machines, An Extra 52Mm Diameter Motor Mount Is Needed. The Genmitsu Aluminum Z Axis Spindle Motor Mount (B0bxrx85wm) Would Be A Great Choice..
The Output Voltage Is Adjustable, The Output Current Is Not Adjustable, And The Output Current Is Determined By The Load..
Install This Spindle Set Into Your Cnc Machines, Then Your Machines Can Easily Engrave Light Metal Or Other Hard-To-Cut Materials..
Features
- Spindle Motor: New chrome-plated Brush DC motor; This spindle comes equipped with air-cooled function, which can work for a long time.
- Install this spindle set into your CNC machines, then your machines can easily engrave light metal or other hard-to-cut materials.
- Radial run out of spindle: 0.01-0.04; Speed: 3000-12000 r/min (12V-3000r/min, 24V-6000r/min, 36V-9000r/min, 48V-12000r/min)
- The output voltage is adjustable, the output current is not adjustable, and the output current is determined by the load.
- Note: If you would like to add it on 3018 series CNC machines, an extra 52mm diameter motor mount is needed. The Genmitsu Aluminum Z Axis Spindle Motor Mount (B0BXRX85WM) would be a great choice.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Weight: 4.52 Pounds
See On Amazon #15
RATTMMOTOR CNC Controller Kit, 4 Axis CNC Kit with Nema23 Stepper Motor 57*76mm 270Oz-in 3A 1.8Nm, TB6600 Driver 4A, USB Mach3 CNC Motion Control Card Breakout Board, 24V Power Supply for CNC Machine
Asin: B09MRXXZZR | Model: 4 axis | PartNumber: 4 axis | Ean: 0754193834842 | UPC: 754193834842
【Low Noise/High Torque Hybrid Stepper Motor】23Hs8430 2-Phase Stepper Motor With A Shaft Diameter Of 8Mm, A Current Of 3A And An Angle Of 1.8°, Is Made Of Durable Metal On The Outside, And The Perfect Combination Of Rubber And Rotor Fills Up The Inner Space And Stabilizes The Overall Structure Of The Motor. The Coils Are Made Of Pure Copper Enameled Wire And The Torque Is Up To 270Oz-In (180N.Cm/18Kg-Cm). The Motor Runs Quietly And Doesn't Cause The Generator To Become Too Hot Over A Long Time..
【Stable Output 24V Dc Power Supply】Over-Current, Over-Voltage And Overload Protection, Power Supply Stable Power Supply, Electrical Energy Conversion Rate Of Up To 90%, Higher Efficiency. Together With The Heat Dissipation Fan Design, Shell Hollow Design, Heat Dissipation Ability Faster And Stronger, More Durable Performance..
【Usb Interface, Drive-Free Design 4-Axis Linkage Control Card】Output Pulse Frequency Of 100Khz, Using The Minimum Error Interpolation Algorithm, High Processing Accuracy. Supports Up To 4 Axes Of Linkage Control, Of Which The 4Th Axis Can Be Set As The Slave Axis. The Control Card Can Be Connected To Pc-Compatible Computers Such As Laptops, Desktops, Tablets And Other Computers With A Usb Interface. As Long As Mach3 Is Running, The Control Card Can Be Used Without Installing Any Drivers..
【Multi-Function Control Card】General-Purpose Opto-Couplers Isolation Input : Can Support The Limit Switch, Emergency Stop Switch, Auto Tool Zero, Home Switch Etc, Electronic Handwheel; Have 0-10V Signal Output , You Can Use Mach3 Software To Control The Spindle Motor Speed; 4 General-Purpose Isolated Relay Drive Output Interface, Can Drive Four Relays For Controlling The Spindle Starts, Forward Rotating And Reverse Rotating, Pumps Or Other Device..
【Support Forward And Reverse Control Stepper Motor Driver】42/57 Tb6600 Stepper Motor Driver With Input Voltage Anti-Reverse Connection And Overheat/Overcurrent Short Circuit Protection, Equipped With Red Warning Light. Through The 3-Digit Dip Switch, You Can Choose 7 Subdivisions (1, 2 / A, 2 / B, 4, 8, 16, 32) And 8 Subdivisions (0.5A, 1.0A 1.5A, 2.0A, 2.5A, 3.0A, 3.5A) Current Control..
【Control Card And Tb6600 Driver Wiring (X-Axis As An Example) 】Driver's "Pul+" Connects To Control Card's Xp+ Pin , Driver's "Dir+" Connects To Control Card's Xd+ Pin , Driver's " Pul- " Pin And " Dir- " Connection To Usb Mach3 Control Card's " 5V ""..
Features
- Motor and TB6600 Driver wiring Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
- Control Card and TB6600 Driver wiring (X-axis as an example) Driver's Pul+ connects to control card's XP+ pin , Driver's DIR+ connects to control card's XD+ pin , Driver's PUL- pin and DIR- connection to USB Mach3 control card's 5V .
- Low Noise/High Torque Hybrid Stepper Motor 23HS8430 2-phase stepper motor with a shaft diameter of 8mm, a current of 3A and an angle of 1.8 , is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
- Support Forward and Reverse Control Stepper Motor Driver 42/57 TB6600 stepper motor driver with input voltage anti-reverse connection and overheat/overcurrent short circuit protection, equipped with red warning light. through the 3-digit DIP switch, you can choose 7 subdivisions (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 subdivisions (0.5A, 1.0A 1.5A, 2.0A, 2.5A, 3.0A, 3.5A) current control.
- USB Interface, Drive-free Design 4-Axis Linkage Control Card Output pulse frequency of 100KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.
- Multi-function control card General-purpose opto-couplers isolation input : can support the limit switch, emergency stop switch, auto tool zero, home switch etc, electronic handwheel; Have 0-10V signal output , you can use mach3 software to control the spindle motor speed; 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device.
- Stable output 24V DC power supply Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 1.93 x 8.46 x 4.49 Inches
See On Amazon #16
HY HUANYANG Water Cooled CNC Spindle Motor 220V 2.2KW 24000RPM 400hz 80mm ER20 for Engraving Machine
Asin: B077BYVT56 | Ean: 0724509858176 | UPC: 724509858176
【Low Noise】The Dynamic Balance Technology Can Effectively Reduce The Noise During Use. The Scientifically Designed Water Circulation System Has A Better Heat Dissipation Effect To Ensure Smooth Operation..
【Warranty Assurance】Half A Year Warranty,You Can Contact Us If You Have Any Problems, We Will Carry Out After-Sales Service For You.
【Characteristic Advantage】Shell Is Cooled By Liquid Cycle To Reduce The Heat Rise Caused By High-Speed Rotation.Advanced Dynamic Balance Technology Effectively Reduce The Noise And Increase Stability In The Working Process,Adopt Precision Steel Ball Holder To Ensure The Rotation Precision Of The Spindle In High Speed Grinding,.
【High Precision Collet】Er20 Standard Collet, The Collet Of The Cnc Spindle Is Quenched With Manganese Steel, And The Runout Is Less Than 0.005 Mm, Which Has High Precision And Is Not Easy To Break The Knife, Increasing The Stability Of The Working Process. Dynamic Balance Technology Can Effectively Reduce Noise During Use..
Features
- Powerful Bearings Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
- High Precision Collet ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
- Low Noise The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
- Characteristic Advantage Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process,Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding,
- WARRANTY ASSURANCE Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you
- See more on Amazon...
Brand: HY HUANYANG | Manufacturer: Huanyang Electrical
Weight: 12.21 Pounds
See On Amazon #17
CNC Spindle Motor Kits,220V 1.5KW ER16 Square Air Cooled Spindle Motor CNC Spindle CNC Motor + 220V 1.5KW VFD + Collets Set ER16+ Wires + Drill Bits+Wrenches for CNC Router Machine
Asin: B0B9B7ZM9H | Model: ytx-220v-er16-1.5 air kit | PartNumber: ytx-220v-er16-1.5 air kit
【Longer Woking Life】: There Are Authentic 4Pcs Steel Bearings Comparing With 3 Bearings Of Other Suppliers, Significantly Extend Working Life 3 Times Longer Than Ordinary Spindle Motor..
【Warranty Assurance】: We Have 20 Years Manufacturing Experience , Pls Contact Us For Any Question Or Problem. We Are Proficient In Customizing Products According To Various Requests And Applications. If You Have Special Inquiry, Pls Let Us Know..
【High Precision】: We Make Further Processing For High Accuracy & Concentricity, The Runout Off Of Our Spindle Motor Is Less Than 0.005Mm That 10 Times Precision Beyond Normal Spindle Motor..
【Easy And Fast To Assemble】: Our Vfd Has Been Pre-Setting Up, The Spindle Is With 8 Hole Installing Holes, We Offer Complete Accessories That Make You Assemble On Your Machine Very Easily And Fast..
Features
- Package list :1pcs 220V ER16 1.5KW Square air cooled spindle motor +1pcs 220V 1.5KW VFD +13pcs Collet ER16(1mm-10mm) + 10pcs Drill Bits+ 2 wires+wrenches
- Easy and fast to assemble : Our VFD has been pre-setting up, the spindle is with 8 hole installing holes, we offer complete accessories that make you assemble on your machine very easily and fast.
- Longer woking life : There are Authentic 4pcs steel bearings comparing with 3 bearings of other suppliers, significantly extend working life 3 times longer than ordinary spindle motor.
- High precision : We make further processing for high accuracy & concentricity, the runout off of our spindle motor is less than 0.005mm that 10 times precision beyond normal spindle motor.
- Warranty assurance : We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.
- See more on Amazon...
Brand: Zhong Hua Jiang | Manufacturer: huajiang
See On Amazon #18
CNC Spindle Motor Bracket Cast Aluminium Mount Spindle Clamp Bracket for 3 Dimensional Printing CNC Engraving Millng Machine (52mm)
Asin: B076CJQ834 | Ean: 0663862261455 | UPC: 663862261455
Two Inner Diameter:52Mm, 65Mm That You Can Choose For Different Projects.
Made Of High Quality Cast Aluminum, This Spindle Motor Bracket Clamp Is Strong And Durable.
The Surface Is Well Finished By Sand Blast Which Ensures A Better Smoothness.
This Motor Bracket Clamp Would Be A Great Replacement For Cnc Part.
Features
- Applied to various occasions, such as 3D printing, CNC engraving machines and so on
- This motor bracket clamp would be a great replacement for CNC part
- Two inner diameter:52mm, 65mm that you can choose for different projects
- The surface is well finished by sand blast which ensures a better smoothness
- Made of high quality cast aluminum, this spindle motor bracket clamp is strong and durable
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.62 pounds
Warranty: ManufacturerWarrantyDescription
See On Amazon #19
CNC Spindle Motor Kits,110V 1.5KW ER16 Square Air Cooled Spindle Motor CNC Spindle CNC Motor + 110V 1.5KW VFD + Collets Set ER16+ Wires + Drill Bits+Wrenches for CNC Router Machine
Asin: B0B99QL131 | Model: ytx-110v-er16-1.5kw air kit | PartNumber: ytx-110v-er16-1.5kw air kit
【Longer Woking Life】: There Are Authentic 4Pcs Steel Bearings Comparing With 3 Bearings Of Other Suppliers, Significantly Extend Working Life 3 Times Longer Than Ordinary Spindle Motor..
【Warranty Assurance】: We Have 20 Years Manufacturing Experience , Pls Contact Us For Any Question Or Problem. We Are Proficient In Customizing Products According To Various Requests And Applications. If You Have Special Inquiry, Pls Let Us Know..
【High Precision】: We Make Further Processing For High Accuracy & Concentricity, The Runout Off Of Our Spindle Motor Is Less Than 0.005Mm That 10 Times Precision Beyond Normal Spindle Motor..
【Easy And Fast To Assemble】: Our Vfd Has Been Pre-Setting Up, The Spindle Is With 8 Hole Installing Holes, We Offer Complete Accessories That Make You Assemble On Your Machine Very Easily And Fast..
Features
- Package list :1pcs 110V ER16 1.5KW Square air cooled spindle motor +1pcs 110V 1.5KW VFD +13pcs Collet ER16(1mm-10mm) + 10pcs Drill Bits+ 2 wires+wrenches
- Easy and fast to assemble : Our VFD has been pre-setting up, the spindle is with 8 hole installing holes, we offer complete accessories that make you assemble on your machine very easily and fast.
- Longer woking life : There are Authentic 4pcs steel bearings comparing with 3 bearings of other suppliers, significantly extend working life 3 times longer than ordinary spindle motor.
- High precision : We make further processing for high accuracy & concentricity, the runout off of our spindle motor is less than 0.005mm that 10 times precision beyond normal spindle motor.
- Warranty assurance : We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.
- See more on Amazon...
Brand: Zhong Hua Jiang | Manufacturer: huajiang
See On Amazon #20
Genmitsu Upgraded Aluminum Z Axis Assembly V2 Kit, with Spindle Motor Mount for 775 Spindle and 300-500W Spindle, 43mm & 52mm Diameter Spindle Holder for CNC Machine 3018-PRO
Asin: B0BXRYXX91 | Model: 566005021 | PartNumber: 566005021 | Ean: 0816550026601 | UPC: 816550026601
It Is Compatible With Genmitsu 3018-Pro Cnc Machine. There Is A Z-Axis Rotary Knob On Its Top. You Can Adjust The Height Of The Z-Axis Manually Without Power..
The Spindle Carriage Is Made Of High Quality Aluminium For Greater Rigidity And Durability. It Can Hold The Motor Firmly To Increase Stability And Reduce Noise. Limit Switches And Linear Bearings Are Pre-Installed..
Compared With The V1 Version, The V2 Version Has Reduced The Height Of The Spindle Mount So That The Effective Range Of The Z Axis Is Increase From 40Mm To 56Mm..
The Spindle Mount Is Exchangeable. The Compatible 65Mm And 69Mm Spindle Mount Is Available For Ordering Now, Which Supports Adding The Trimmer Router..
Features
- This Upgraded Aluminum Z Axis Assembly with 52mm spindle mount supports you upgrade your CNC Machine with a more powerful 300-500W motor. It also comes with a 43mm motor mount for fitting the 775 Spindle.
- The spindle mount is exchangeable. The compatible 65mm and 69mm spindle mount is available for ordering now, which supports adding the trimmer router.
- It is compatible with Genmitsu 3018-PRO CNC machine. There is a Z-axis rotary knob on its top. You can adjust the height of the Z-axis manually without power.
- Compared with the V1 version, the V2 version has reduced the height of the spindle mount so that the effective range of the Z Axis is increase from 40mm to 56mm.
- The spindle carriage is made of high quality aluminium for greater rigidity and durability. It can hold the motor firmly to increase stability and reduce noise. Limit switches and linear bearings are pre-installed.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon
Looking For Something Else?
Search