uxcell 14mm to 14mm Shaft Plum Shaped Coupling Coupler 30mm Diameter 35mm Length
Asin: B078VS1F83 | Model: a17110100ux0233 | PartNumber: a17110100ux0233
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Size: 35 X 30Mm/ 1.38 X 1.17 Inch( L*D); Main Color: Silver Tone,Red.
The Shaft Couplers Are Mainly Used For Servo Motors, Spindle, Step Motor Etc..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy, Polyurethane; Type: Plum Shaped.
Features
- Shaft Usage: 14mm to 14mm / 0.55inch to 0.55 inch
- Material: Aluminum alloy, polyurethane; Type: Plum shaped
- Size: 35 x 30mm/ 1.38 x 1.17 inch( L*D); Main Color: Silver tone,Red
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are mainly used for servo motors, spindle, step motor etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 14mm to 14mm Shaft
#1
uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 Stainless Steel,Shaft Coupler Connector for 3D Printers, Motor Accessories,2pcs
Asin: B07P5YZKY5
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.97 x 1.18 inches
See On Amazon #2
uxcell M12x1.25mm Hexagon Slotted Nut, Grade 4.8 Carbon Steel Hex Castle Nuts, Black, 10Pcs
Asin: B0B1V6T34L | Model: a22030900ux0114 | PartNumber: a22030900ux0114
[Material] - Made Of Carbon Steel With A Blackened Surface Finish, This Hex Slotted Nut Is Of High Hardness, Not Easy To Rust, Deform, Wear-Resistant And Anti-Corrosion.
[Usage] - Commonly Used In Industry To Secure Front Wheel Bearings Or Hubs To Main Shafts On Trucks. Suitable For Some Repair And Maintenance In The Mechanical Industry, Shops, Garages, Household Furniture Fasteners, Etc..
[Function] - The Slots Are For The Insertion Of A Cotter Pin To Secure The Nut When Used With A Drilled Shank Fastener. Fitting For A 2.5X25mm Cotter Pin.
[Size] - 0.75" (19Mm) Width Across Flat, 0.55" (14Mm) Height, 0.35" (9Mm) Full Thread Height, Grade: 4.8.
Features
- [Threaded] - Thread Size: M12; Thread Pitch: 1.25mm / 0.05"; Slot Width: 4mm / 0.16"
- [SIZE] - 0.75 (19mm) width across flat, 0.55 (14mm) height, 0.35 (9mm) full thread height, Grade: 4.8
- [Material] - Made of carbon steel with a blackened surface finish, this hex slotted nut is of high hardness, not easy to rust, deform, wear-resistant and anti-corrosion
- [Function] - The slots are for the insertion of a cotter pin to secure the nut when used with a drilled shank fastener. Fitting for a 2.5x25mm cotter pin
- [Usage] - Commonly used in industry to secure front wheel bearings or hubs to main shafts on trucks. Suitable for some repair and maintenance in the mechanical industry, shops, garages, household furniture fasteners, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell M14x1.5mm Hexagon Slotted Nut, Grade 4.8 Carbon Steel Hex Castle Nuts, Black, 5Pcs
Asin: B0B1V9ZF4W | Model: a22030900ux0118 | PartNumber: a22030900ux0118
[Material] - Made Of Carbon Steel With A Blackened Surface Finish, This Hex Slotted Nut Is Of High Hardness, Not Easy To Rust, Deform, Wear-Resistant And Anti-Corrosion.
[Usage] - Commonly Used In Industry To Secure Front Wheel Bearings Or Hubs To Main Shafts On Trucks. Suitable For Some Repair And Maintenance In The Mechanical Industry, Shops, Garages, Household Furniture Fasteners, Etc..
[Function] - The Slots Are For The Insertion Of A Cotter Pin To Secure The Nut When Used With A Drilled Shank Fastener. Fitting For A 2.5X32mm Cotter Pin.
[Size] - 0.83" (21Mm) Width Across Flat, 0.59" (15Mm) Height, 0.35" (9Mm) Full Thread Height, Grade: 4.8.
Features
- [Threaded] - Thread Size: M14; Thread Pitch: 1.5mm / 0.06"; Slot Width: 4mm / 0.16"
- [SIZE] - 0.83 (21mm) width across flat, 0.59 (15mm) height, 0.35 (9mm) full thread height, Grade: 4.8
- [Material] - Made of carbon steel with a blackened surface finish, this hex slotted nut is of high hardness, not easy to rust, deform, wear-resistant and anti-corrosion
- [Function] - The slots are for the insertion of a cotter pin to secure the nut when used with a drilled shank fastener. Fitting for a 2.5x32mm cotter pin
- [Usage] - Commonly used in industry to secure front wheel bearings or hubs to main shafts on trucks. Suitable for some repair and maintenance in the mechanical industry, shops, garages, household furniture fasteners, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell #35 Chain Idler Sprocket, 10mm Bore 3/8" Pitch 15 Tooth Sprocket Tensioner, C45 Carbon Steel 35 Roller Chain Sprocket with Bearing for ISO 06C Chain, 2Pcs
Asin: B0CCW63929
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 15; Outside Diameter: 49mm / 1.93-inch; Bump Width: 5mm / 0.2-inch; Total Width: 14mm / 0.55-inch; Bore Diameter: 10mm / 0.39-inch; Pitch: 3/8-inch / 9.525mm; Tooth Width: 4mm / 0.16-inch; 2 x Idler Sprocket
- Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell #40 Chain Idler Sprocket, 12mm Bore 1/2" Pitch 13 Tooth Tensioner, Black Oxide Finished C45 Carbon Steel with Insert Single Bearing for ISO 08A Chains
Asin: B09WYJ1YB6 | Model: a22011900ux0712 | PartNumber: a22011900ux0712
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Chain Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 13; Bearing Model: 6001Z; Outside Diameter: 58mm / 2.28-inch; Bump Width: 3.5mm / 0.14-inch; Total Width: 14mm / 0.55-inch; Bore Diameter: 12mm / 0.47-inch; Pitch: 1/2-inch / 12.7mm; Tooth Width: 7mm / 0.28-inch; 1 x Idler Sprocket
- Idler sprocket is a chain sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell 1/4 inch to 1/4 inch Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories,Blue
Asin: B07P82DDVW
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 1/4 inch to 1/4 inch, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 inches
See On Amazon #7
uxcell 12.7mm to 14mm Shaft Coupling 45mm Length 32mm Diameter Coupler Aluminum Alloy Joint Motor for 3D Printer CNC Machine DIY Encoder
Asin: B06X9WD8RF | Model: SYNCE007196 | PartNumber: SYNCE007196
Feature: Screw Type(Coiling Clamping); Main Color: Silver Tone.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Simplifies The Debugging Difficulty..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy; Size: 45X32mm/ 1.77X1.26Inch( L*D).
Features
- Shaft Usage: 12.7mm to 14mm / 0.5 to 0.55 inch
- Material: Aluminum alloy; Size: 45x32mm/ 1.77x1.26inch( L*D)
- Feature: Screw Type(Coiling Clamping); Main Color: Silver tone
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.97 x 1.97 Inches
See On Amazon #8
uxcell 10pcs Set Screw Collars 8mm ID Shaft Collars, 14mm OD, Gear Stopper Wheel Collar, Black
Asin: B0CQ2PXBRF
Adjustable Positioning - The Set Screw Design Allows For Adjustable Positioning Along The Shaft. This Flexibility Enables Fine-Tuning And Precise Alignment Of Components To Achieve Optimal Functionality And Performance..
Easy Installation - These Collars Are Easy To Install On The Shaft. Simply Slide The Collar Onto The Desired Position And Tighten The Set Screw Using A Compatible Hex Wrench. No Additional Tools Or Disassembly Of Other Components Are Required..
Versatile Applications - These Collars Are Widely Used Across Different Industries, Including Automotive, Robotics, And Rc Airplane Models. They Can Be Used In Various Equipment And Machinery To Secure Gears, Pulleys, Sprockets, Or Other Components Onto Shafts..
Durable Construction - Made Of Nickel-Plated Carbon Steel, High Strength, Strong Locking Force, Anti-Corrosion, And Durability. Round Bore Collars Are Commonly Used As Positioners, Spacers, Stops, And Bearing Surfaces..
Features
- Size - 8mm shaft collars with set screw, 14mm outside diameter, 7mm thickness.
- Durable Construction - Made of nickel-plated carbon steel, high strength, strong locking force, anti-corrosion, and durability. Round bore collars are commonly used as positioners, spacers, stops, and bearing surfaces.
- Adjustable Positioning - The set screw design allows for adjustable positioning along the shaft. This flexibility enables fine-tuning and precise alignment of components to achieve optimal functionality and performance.
- Versatile Applications - These collars are widely used across different industries, including automotive, robotics, and RC airplane models. They can be used in various equipment and machinery to secure gears, pulleys, sprockets, or other components onto shafts.
- Easy Installation - These collars are easy to install on the shaft. Simply slide the collar onto the desired position and tighten the set screw using a compatible hex wrench. No additional tools or disassembly of other components are required.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell 3 x 14mm(Approx 1/8") Dowel Pin 304 Stainless Steel Wood Bunk Bed Dowel Pins Shelf Pegs Support Shelves 25Pcs
Asin: B07Y58JKMC | Model: a19090600ux0196 | PartNumber: a19090600ux0196
【Easy To Install】: This Cylindrical Locating Pin Has Special Chamfering On The Two Ends Of The Pin, So That The Pin Can Be Easily Inserted Into The Mounting Hole. Please Confirm The Size Of The Locating Pin You Need Before Purchase..
【Notice】: In Order To Make Dowel Pins A Tight Fit, Your Hole Should Be Equal To Or Slightly Smaller Than The Diameter Shown (Less Than 3 Mm).
【Application】: Mainly Used For Wooden Products, Double Bed, Bookshelf, Shelf, Outdoor Shade Shed, Cabinet Partition, Etc.; Metal Devices, Such As Punching Punch, Industrial , Fixture, Pin Gauge, Hinge Or Shaft Fixed Application.
【Material】: These Dowel Pin Steel Are Made Of 304 Stainless Steel. Its Surface Is Very Smooth. They Are Rust-Resistant, Corrosion-Resistant, Strong And Durable For Long Using Life..
Features
- Size Diameter:3mm/0.12" and Tolerance:+0.0008"/-0.0008",Height:14mm/0.55" and Tolerance:+0.02"/-0.02";Finish Type:Centerless grinding.
- Material : These Dowel Pin Steel are made of 304 stainless steel. Its surface is very smooth. They are rust-resistant, corrosion-resistant, strong and durable for long using life.
- Easy to install : This cylindrical locating pin has special chamfering on the two ends of the pin, so that the pin can be easily inserted into the mounting hole. Please confirm the size of the locating pin you need before purchase.
- Application : Mainly used for wooden products, double bed, bookshelf, shelf, outdoor shade shed, cabinet partition, etc.; metal devices, such as punching punch, industrial , fixture, pin gauge, hinge or shaft fixed application
- Notice : In order to make dowel pins a tight fit, your hole should be equal to or slightly smaller than the diameter shown (less than 3 mm)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell 51202 Miniature Thrust Ball Bearing 15mm x 32mm x 12mm Chrome Steel with Washer 4pcs
Asin: B08NJ5ZBD5
[Capability] - Dynamic Load Rating (Cr): 13400N; Static Load Rating (Cor): 14500N; Limiting Speed (Grease): 5300Rpm, Designed For Low Speed Operation And Axial Loads Only.
[Features] - The Separable Components Of Thrust Ball Bearings Are Interchangeable. Low Noise And Long Service Life, Easy To Maintain. Keep The Bearing Working Environment Clean And Bearing Lubricated In Time.
[Application] - Can Be Used For Oven Turntable, Jack, Pump, Rotating Applications, Machine Tools, Automobiles, Ect..
[Material] - Made Of Chrome Steel(Aisi 52100), Have Great Wear-Resistant, High Temperature Resistance And High Hardness; Steel Cage.
Features
- [SIZE] - Bore Diameter=15mm, Outer Diameter=32mm, Thickness=12mm
- [MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Steel cage
- [CAPABILITY] - Dynamic Load Rating (Cr): 13400N; Static Load Rating (Cor): 14500N; Limiting Speed (Grease): 5300rpm, designed for low speed operation and axial loads only
- [APPLICATION] - Can be used for oven turntable, jack, pump, rotating applications, machine tools, automobiles, ect.
- [FEATURES] - The separable components of thrust ball bearings are interchangeable. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search