TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis New Upgraded Version of The 42/57/86 Stepper Motor
Asin: B07KNTM4RZ | Ean: 0722704681308 | UPC: 722704681308
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: Reland Sung | Manufacturer: Reland Sung
See On Amazon Similar To TB6600 Stepper Motor Driver Controller
#1
SMAKN 4.5A Stepper motor drives TB6600 Driver Board Controller
Asin: B00WSE1YSI | Model: EVB648 | PartNumber: EVB648 | Ean: 0709127321646 | UPC: 709127321646
The Use Of High-Speed Optical Coupling 6N137, Ensure High Speed Without Losing Step..
Size:82Mm*50Mm*35Mm(L*W*H).
Rated Maximum Output Reached: ± 4.5A..
It Is Recommended To Use Dc32v Power Supply Switch Power Supply..
Features
- Operating voltage: DC 10V-45V.
- It is recommended to use DC32V power supply switch power supply.
- The use of high-speed optical coupling 6N137, ensure high speed without losing step.
- Rated maximum output reached: 4.5A.
- Size:82mm*50mm*35mm(L*W*H)
- See more on Amazon...
Brand: SMAKN | Manufacturer: SMAKN
See On Amazon #2
V TELESKY 1PCS TB6600 Upgraded Motor Drive Board 42 57 Stepper Motor Drive Control Board 4A32 Subdivision
Asin: B0D53G4GPB
There Are 7 Subdivision Modes Available For 32 Subdivisions.
Built In Temperature Protection And Overcurrent Protection..
The Large Heat Sink Is Not Afraid Of High Temperature Usage Environments.
H-Bridge Bipolar Constant Phase Current Drive.
Features
- The TB6600 upgraded version is a two-phase hybrid stepper motor driver
- H-bridge bipolar constant phase current drive
- There are 7 subdivision modes available for 32 subdivisions
- The large heat sink is not afraid of high temperature usage environments
- Built in temperature protection and overcurrent protection.
- See more on Amazon...
Brand: V TELESKY | Manufacturer: V TELESKY
See On Amazon #3
TB6600 Stepper Motor Driver Controller 9~42V 4A TTL 16 Micro-Step CNC 1 Axis
Asin: B0C2TLQT8K
Electrical Input Signal Is Ttl Compatible.
Warranty.
Stationary Current Is Automatically Reduced By Half.
High-Speed Optocoupler Signal Isolation Input.
Features
- Bipolar constant current chopper
- High-speed optocoupler signal isolation input
- Electrical input signal is TTL compatible
- Stationary current is automatically reduced by half
- Warranty
- See more on Amazon...
Brand: Generic | Manufacturer: DAVITU
See On Amazon #4
CNC Single Axis TB6600 4A Two Phase Stepper Motor Driver Controller
Asin: B0C2TG937F
1)5 Microstep: 1,1/2,1/4,1/8,1/16.
1. As Shown Abovepowerin Power Input Interface, As Shown Above Left Negative Ultra-Right Is Positive, 50V Input Voltage 12..
2)Current From 0.7-4A Stepless Adjust3)Overheat/Undervoltage/Overcurrent Protection(Tb6560 Only Have Overheat Protection).
The Main Advantages Of The Tb6560ahq Chip:.
Features
- Package Includes: 1 x CNC Single Axis TB6600 0.5 -4A Two Phase Stepper Motor Driver Controller
- The main advantages of the TB6560AHQ chip:
- 1)5 microstep: 1,1/2,1/4,1/8,1/16
- 2)current from 0.7-4A stepless adjust3)overheat/undervoltage/overcurrent protection(TB6560 only have overheat protection)
- 1. As shown abovePOWERIN power input interface, as shown above left negative ultra-right is positive, 50V input voltage 12.
- See more on Amazon...
Brand: Generic | Manufacturer: DAVITU
See On Amazon #5
STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-Step Resolutions for Nema 17 and 23 Stepper Motor
Asin: B06Y5VPSFN | Model: DM542T | PartNumber: DM542T | Ean: 0715624558829, 0715776647549, 0714485410482 | UPC: 714485410482, 715624558829, 715776647549
1.0~4.2A, 20~50Vdc, 1/128 Microstep Resolution.
100% Service Satisfactory. We Provided This Stepper Motor Kit With 30 Days Free Replacement Or Refund, 1 Year Warranty And Whole Life Customer Service From The Date Of Purchasing..
Pulse Signal: 4-5V When Pul-High, 0-0.5V Whenpul-Low. The Same As Dir And Ena Signals.
Industrial-Grade Stepper Driver, Suit For Nema 17 And 23 Stepper Motor.
Features
- Stepper motor driver DM542T is updated to version V4.0, add 5V/24V logical voltage selector, alarm outputs. Please attention, Factory setting is 24V, if you need to use 5V, switch selector on the top of the driver.
- Industrial-grade Stepper Driver, Suit for Nema 17 and 23 Stepper Motor
- 1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution
- Pulse signal: 4-5V when PUL-HIGH, 0-0.5V whenPUL-LOW. The same as DIR and ENA signals
- 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing.
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OMC CORPORATION LIMITED
Dimensions: 1.00 x 0.00 x 2.97 inches | Weight: 0.46 Pounds
See On Amazon #6
HiLetgo 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap Suitable for Mendel Huxley Arduino
Asin: B07BND65C8 | Model: 3-01-0108-5pcs | PartNumber: 3-01-0108-5pcs
Adjustable Current Control Lets You Set The Maximum Current Output With A Potentiometer.
Over-Temperature Thermal Shutdown, Under-Voltage Lockout, And Crossover-Current Protection.
Intelligent Chopping Control That Automatically Selects The Correct Current Decay Mode (Fast Decay Or Slow Decay).
Five Different Step Resolutions: Full-Step, Half-Step, Quarter-Step, Eighth-Step, And Sixteenth-Step. Output Drive Capacity Of Up To 35 V And ± 1.2 A.
Features
- Simple step and direction control interface,Take anti-static measures before you use the A4988 modules in case of short-circuit
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step. Output drive capacity of up to 35 V and 1.2 A
- Adjustable current control lets you set the maximum current output with a potentiometer
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #7
Stepper Motor Driver Controller Integrated Board Forward/Reverse Pulse Speed Angle Control Module PLC Serial Communication for NEMA 17 23 Motor
Asin: B0B1HNS9L2 | Model: 4257 | PartNumber: 4257 | Ean: 0706316482645 | UPC: 706316482645
[4 Control Mode] In Addition To Its Built-In Parameters Work Mode,It Can Also Control By External Buttons Or Others Driver Or Uart Commands.
[Hd Lcd Display] The Hd Lcd Can Clearly Display The Speed/Delay/Cycle Times, Making It Easier To Browse And Set Various Parameters. Realize High-Precision Control Of The Motor. Parameters Support Memory Function That Will Not Be Lost.
[9 Work States] Built-In 9 Default Workflow Programs, Covering Most Applications, To Meet The Needs Of Different Scenarios.Forward/Reverse/Delay/Loop/Self-Locking/No-Lock/Rotating Speed And So On.
[Forward & Reverse] It Can Not Only Change Rotation Direction By Pressing Button, But Also By Potentiometer. It Is Also Automatically Change The Direction Through The Selected Working Mode To Achieve Multi-Scene And Multi-Application.
Features
- [Controller & Driver] Integrated step motor controller and driver functions.It can not only realize the drive motor, but also control the working state of the stepper motor in real time
- [Forward & Reverse] It can not only change rotation direction by pressing button, but also by potentiometer. It is also automatically change the direction through the selected working mode to achieve multi-scene and multi-application
- [4 Control Mode] In addition to its built-in parameters work mode,it can also control by external buttons or others driver or UART commands
- [9 work states] Built-in 9 default workflow programs, covering most applications, to meet the needs of different scenarios.Forward/Reverse/Delay/Loop/Self-locking/No-lock/Rotating speed and so on
- [HD LCD display] The HD LCD can clearly display the speed/delay/cycle times, making it easier to browse and set various parameters. Realize high-precision control of the motor. Parameters support memory function that will not be lost
- See more on Amazon...
Brand: BANRIA | Manufacturer: BANRIA
Dimensions: 1.61 x 3.11 x 1.69 inches | Weight: 0.14 Pounds
See On Amazon #8
Usongshine TB6600 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Phase Hybrid Stepper Motor for CNC/42 57 86 Stepper Motor 1 pcs)
Asin: B07HHS14VQ | Model: TB6600-4A | PartNumber: TB6600-4A | Ean: 1006410064105
✿The Largest 32 Subdivision Of The 6 Models Are Optional; Suitable For 4Wires, 6 Wires And 8 Wires Stepper Motor. It Can Control 2 Phase Stepper Motor Forward And Reverse Rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 Phase Excitation Mode..
✿Suitable For A Wide Range Of Stepping Motors Of Nema 17, 23 And 24 Can Used In Various Kinds Of Machines, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, Pick-Place Devices And So On..
✿Protect Form✿: Energy-Saving Semi-Automatic Current Lock Function, Built-In Temperature Protection And Over Current Protection, Under Voltage Protection, Preventing Reverse..
✿Stepper Motor Driver✿: 9V-42V Dc Power Supply, H Bridge Bipolar Constant Phase Flow Drive. The Maximum 4.0A Of The Eight Kinds Of Output Current..
Features
- Package included: 1 x Stepper Motor Driver.
- Stepper Motor Driver : 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current.
- The largest 32 subdivision of the 6 models are optional; Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
- Protect form : Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection, under voltage protection, Preventing reverse.
- Suitable for a wide range of stepping motors of Nema 17, 23 and 24 can used in various kinds of machines, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, pick-place devices and so on.
- See more on Amazon...
Brand: Usongshine | Manufacturer: Usongshine
Dimensions: 1.10 x 3.74 x 3.74 Inches
See On Amazon #9
EASON Stepper Motor Driver TB6600 4A DC9-42V 32 Subdivision for Nema 17, 23 Series Stepper Motor CNC Controller Single Axis Hybrid MicroStepping
Asin: B08SG7L54W | Ean: 0653871352206 | UPC: 653871352206
Suitable For Drive Two-Phase Stepping Motor Dynamic Voltage 9V To 42V, The Maximum Drive Current Is Less Than 4A..
Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
Suitable For Step Motor:Nema(17,23) 42, 57 Type 2 Phase 4 Phase (4 / 6 / 8 Wires).
The Subdivision Is Increased To 32 Subdivision, Which Is Suitable For High Subdivision..
Features
- This driver is an upgraded version of TB6600 and with plastic cover.
- The subdivision is increased to 32 subdivision, which is suitable for high subdivision.
- Suitable for drive Two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A.
- Suitable for step motor:NEMA(17,23) 42, 57 type 2 phase 4 phase (4 / 6 / 8 wires)
- Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- See more on Amazon...
Brand: Eason | Manufacturer: Yisheng Technology
Dimensions: 0.00 x 3.74 x 0.00 inches | Weight: 0.00 Pounds
See On Amazon #10
CNC Digital Stepper Driver DM556 Stepper Motor Controller 2-phase Stepper Motor Driver 20-50V DC Max 5.6A 128 subdivision For Nema 23, 24 and Nema 34 stepper motor
Asin: B08J3NFF9V | Ean: 0791548328502 | UPC: 791548328502
Anti-Resonance For Optimal Torque, Extra Smooth Motion, Low Motor Heating And Noise.
Please Note: If There Is Any Problem, Please Feel Free To Contact Us, Each Defect Items Could Be Refunded Or Reshipped, We Will Try Out Utmost To Support You..
Package: 1Piece Dm556 Driver.
This High Subdivision Driver Is Suitable For High Subdivision Motor. Suitable For Stepper Motor: 57,60,86 Type 2-Phase (4-Wire, 6-Wire, 8-Wire).
Features
- Suitable for Nema 23 ,Nema 24 and Nema34 Stepper Motor 2-phase hybrid stepper motors (Outer diameter: 57, 60,86mm).
- This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor: 57,60,86 type 2-phase (4-wire, 6-wire, 8-wire)
- Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
- Package: 1piece DM556 driver
- PLEASE NOTE: if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you.
- See more on Amazon...
Brand: HoCenWay | Manufacturer: HONGCHENWEI
Dimensions: 1.34 x 4.41 x 2.97 inches
See On Amazon #11
10 Pieces Stepper Motor Driver Module with Heat Sink Compatible with Stepstick Stepper A4988 3D Printer Reprap, CNC Machine or Robotics
Asin: B09FQ3G5XQ | Model: Photect-Driver Module-09 | PartNumber: Photect-Driver Module-09
Five-Step Resolution: There Are 5-Steps Resolution Of The Stepper Motor Drive Modules, Such As Full-Step, Half-Step, Quarter-Step, Eight-Step, Sixteen-Step, And The Output Drive Capacity Is Up To 35V And -2A~2A.
Wide Application: The Stepper Motor Drive Module Is Compatible With Stepper Motor/ 3D Printer/ Cnc/ Engraving Machine/ Supported 3D Printer And More; Please Confirm Whether The Product Model Is Suitable Before Buying.
Protection Function: The Stepper Motor Drive Modules Can Provide Thermal Shutdown Protection, Over Current Protection, Ground Fault Protection And Crossing Current Protection.
Easy To Operate: This Is A Complete Micro-Stepping Motor Driver With A Built-In Converter, Easy To Operate; When Micro-Stepping Is Running, The Chopper Control Compatible With A4988 Can Automatically Select The Current Decay Mode, Slow Or Mixed.
Features
- The package includes: you will receive 10 pieces of stepper motor drive modules and 10 heat sink in the package, enough quantity for your use and replacement
- Easy to operate: this is a complete micro-stepping motor driver with a built-in converter, easy to operate; When micro-stepping is running, the chopper control compatible with A4988 can automatically select the current decay mode, slow or mixed
- Five-step resolution: there are 5-steps resolution of the stepper motor drive modules, such as full-step, half-step, quarter-step, eight-step, sixteen-step, and the output drive capacity is up to 35V and -2A~2A
- Protection function: the stepper motor drive modules can provide thermal shutdown protection, over current protection, ground fault protection and crossing current protection
- Wide application: the stepper motor drive module is compatible with stepper motor/ 3D printer/ CNC/ engraving machine/ supported 3D printer and more; Please confirm whether the product model is suitable before buying
- See more on Amazon...
Brand: Photect | Manufacturer: Photect
See On Amazon #12
STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 178.4oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill
Asin: B00PNEPF5I | Model: 23HS22-2804S | PartNumber: 23HS22-2804S | Ean: 7241870685987, 7535001558364, 5915903798853, 0190657723350, 0714485662461, 0701056353927 | UPC: 701056353927, 714485662461, 190657723350
Nema 23 Bipolar 2.24"X2.24"X2.2" 4-Wire.
Rated Current 2.8A & Resistance 0.9Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
1.26Nm(178.4Oz.In) Holding Torque.
Features
- Higher Torque
- 1.26Nm(178.4oz.in) holding torque
- NEMA 23 bipolar 2.24x2.24x2.2 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 2.8A & resistance 0.9ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OSM Technology Co.,Ltd.
Dimensions: 2.20 x 2.24 x 2.24 inches | Weight: 1.50 Pounds
See On Amazon #13
DC 5-12V/15-160V Stepper Motor Drive,PWM Adjustable Stepper Motor Controller Signal Generator Speed Regulator
Asin: B07HNSVMVH | Ean: 0713325028436 | UPC: 713325028436
To Control The Stepper Motor, Mus Connect To The Driver.
Frequency Of Measurement Can Amount Pul And Common Cathode Terminal (Gnd) Two Ports..
Pul + And Pul- Pulsed Positive And Negative; En + And En- Is To Enable The Positive And Negative Terminals; Dir + And Dir- Are The Positive And Negative Directions..
3 Frequency: High: 5.8Khz-127Khz, Mid: 590Hz-15.8Khz, Low: 82Hz-2.3Khz.
Features
- Power supply: 15-160VDC or 5-12VDC. If you are using 5-12VDC power, positive end connect DC 5-12V Input, negative end connect Common Cathode End.
- 3 Frequency: High: 5.8KHZ-127KHZ, Mid: 590HZ-15.8KHZ, Low: 82HZ-2.3KHZ
- To control the stepper motor, mus connect to the driver
- PUL + and PUL- pulsed positive and negative; EN + and EN- is to enable the positive and negative terminals; DIR + and DIR- are the positive and negative directions.
- Frequency of measurement can amount PUL and common cathode terminal (GND) two ports.
- See more on Amazon...
Brand: SYWAN | Manufacturer: Sywan
Weight: 0.11 Pounds
See On Amazon #14
DC 5-30V 4A Stepper Motor Driver Controller Integrated Board Forward/Reverse Pulse Speed Angle Control Module PLC Serial Communication for NEMA 17 23 Motor
Asin: B0C2V4BF86 | Model: 743645935459 | PartNumber: 743645935459 | Ean: 0743645935459 | UPC: 743645935459
9 Working Modes: The Module Has Built-In Multiple Fixed Operation Modes, And Users Can Quickly Select The Appropriate Motion Trajectory To Meet Different Application Scenarios.
Lcd Display: The Lcd Screen Can Clearly Display The Speed/Delay/Cycle Time, Control The Motor With High Precision, And The Controller Parameters Support The Memory Function That Will Not Be Lost.
4 Control Mode : In Addition To Its Built-In Parameters Work Mode,It Can Also Control By External Buttons Or Others Driver Or Uart Commands.
Motor Type : Working For Dc10-30V Two Phase 4-Wire 5-Wire 6-Wire 8-Wire Stepper Motor.
Features
- 2 in 1 :This SMC02 is Stepper motor controller + stepper motor driver, which can be directly connected to the stepper motor.
- Motor Type : Working for DC10-30V Two phase 4-wire 5-wire 6-wire 8-wire stepper motor
- 9 Working Modes: The module has built-in multiple fixed operation modes, and users can quickly select the appropriate motion trajectory to meet different application scenarios
- 4 Control Mode : In addition to its built-in parameters work mode,it can also control by external buttons or others driver or UART commands
- LCD Display: The LCD screen can clearly display the speed/delay/cycle time, control the motor with high precision, and the controller parameters support the memory function that will not be lost
- See more on Amazon...
Brand: TKXEC | Manufacturer: TKXEC
See On Amazon #15
4 Pack TB6600 4A 9-42V Stepper Motor Driver CNC Controller, Stepper Motor Driver Nema tb6600 Single Axes Two Phase Hybrid Stepper Motor for CNC
Asin: B07RRB6BGQ | Model: 0042 | PartNumber: 0042 | Ean: 0725756323042 | UPC: 725756323042
Energy-Saving Semi-Automatic Current Lock Function, Built-In Temperature Protection And Over Current Protection..
Only The Clock Pulse Signal Can Be Driven Two-Phase Bipolar Stepper Motor To Achieve Low Vibration, High Efficiency Work..
Can Control 2 Phase Stepper Motor Forward And Reverse Rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 Phase Excitation Mode..
The Maximum 4.0A Of The Eight Kinds Of Output Current. The Largest 32 Subdivision Of The 6 Models Are Optional..
Features
- 9V-42V DC power supply, H bridge bipolar constant phase flow drive.
- The maximum 4.0A of the eight kinds of output current. The largest 32 subdivision of the 6 models are optional.
- Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.
- Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
- Only the clock pulse signal can be driven two-phase bipolar stepper motor to achieve low vibration, high efficiency work.
- See more on Amazon...
Brand: SZCY LLC | Manufacturer: SZCY LLC
See On Amazon #16
DC 5-30V CNC Stepper Motor Controller,PEMENOL 1/128 Micro-Step Resolution Forward Reverse Delay Time Angle Speed Adjustable Stepper Motor Control Module with HD Display Suit for Nema17/23 Motor
Asin: B0BK1GYBR1 | Model: GY20752 | PartNumber: GY20752
9 Operating States: Pemenol Stepping Motor Controller Has 9 Built-In Fixed Working Modes, Including Forward Rotation, Reverse Rotation, Delay, Cycle, Etc., So You Can Select The Working Mode More Quickly. In Addition To The Built-In Parameter Working Mode, You Can Also Control Through External Buttons Or Other Drives..
Forward And Reverse Rotation: Pemenol Stepper Motor Controller Can Change The Direction Of Motor Rotation By Pressing A Button, And You Can Also Select Two Modes, Automatic Or Manual, By Selecting The Working Mode, Which Is More Widely Used..
13 Kinds Of Menu Setting Functions: Pemenol Stepper Motor Controller Including Cycle Number, Motor Turns, Delay Time, Number Of Pulses, Forward Speed, Flip Speed, Etc. The External Buttons And Knob Encoder Make It Very Easy To Set The Parameters..
Hd Lcd Display: Pemenol Stepper Motor Controller Has A Hd Lcd Display, So You Can Read The Parameters Very Easily And Set Various Parameters More Precisely. The Module Also Has A Power Failure Memory Function To Prevent Your Parameters From Being Lost..
Various Functions: Pemenol Stepper Motor Controller Can Adjust The Angle, Speed, Direction And Delay Time Of The Motor. The Micro Stepping Resolution Can Reach 1/128, Enabling You To Control The Motor More Accurately. Note: This Product Is A Stepper Motor Controller, Which Needs To Be Used With The Driver..
Features
- CAN NOT DRIVE THE MOTOR ALONE: This module is a stepper motor controller. It CANNOT directly control the stepper motor. It needs to connect a stepper motor DRIVER(NOT INCLUDED)to control the motor.
- VARIOUS FUNCTIONS: PEMENOL stepper motor controller can adjust the angle, speed, direction and delay time of the motor. The micro stepping resolution can reach 1/128, enabling you to control the motor more accurately. NOTE: This product is a stepper motor controller, which needs to be used with the driver.
- 9 OPERATING STATES: PEMENOL stepping motor controller has 9 built-in fixed working modes, including forward rotation, reverse rotation, delay, cycle, etc., so you can select the working mode more quickly. In addition to the built-in parameter working mode, you can also control through external buttons or other drives.
- HD LCD DISPLAY: PEMENOL stepper motor controller has a HD LCD display, so you can read the parameters very easily and set various parameters more precisely. The module also has a power failure memory function to prevent your parameters from being lost.
- FORWARD AND REVERSE ROTATION: PEMENOL stepper motor controller can change the direction of motor rotation by pressing a button, and you can also select two modes, automatic or manual, by selecting the working mode, which is more widely used.
- 13 KINDS OF MENU SETTING FUNCTIONS: PEMENOL stepper motor controller including cycle number, motor turns, delay time, number of pulses, forward speed, flip speed, etc. The external buttons and knob encoder make it very easy to set the parameters.
- See more on Amazon...
Brand: PEMENOL | Manufacturer: PEMENOL
Dimensions: 1.02 x 3.11 x 1.60 inches
See On Amazon #17
Twotrees Nema 17 Stepper Motor + Stepper Motor Driver, TB6600 4A 9-42V Nema 17/23 CNC Controller Single Axes Hybrid - Upgraded Version
Asin: B07PNZRPQH | Model: 2012-02-21 | PartNumber: 2012-02-21 | Ean: 8431269736331
【3】Motor Driver: 9V-42V Dc Power Supply, H-Bridges Bipolar Constant Phase Current Drive. The Maximum 4.0A Of The Eight Types Of Output Current..
【5】Protect Form: Overheated Protection, Overcurrent Protection, Undervoltage Protection, Prevention Of Inversion..
【4】The Largest 32 Divisions Of The 6 Models Are Optional; Suitable For 4 Wires, 6 Wires And 8 Wires Stepper Motor..
【2】Suitable For A Wide Range Of Stepper Motors From Nema Size 17,23 And 24 (42 * 42Mm To 60 * 60Mm). It Can Be Used In Various Types Of Machines, Such As Xyz Tables, Labellers, Laser Cutters, Engraving Machines, Pick-Place Devices And So On..
Features
- 1 Package included: 1 x Stepper Motor Driver,1 x Stepper Motor, 1 x Wire.
- 2 Suitable for a wide range of stepper motors from NEMA size 17,23 and 24 (42 * 42mm to 60 * 60mm). It can be used in various types of machines, such as XYZ tables, labellers, laser cutters, engraving machines, pick-place devices and so on.
- 3 Motor driver: 9V-42V DC power supply, H-bridges bipolar constant phase current drive. The maximum 4.0A of the eight types of output current.
- 4 The largest 32 divisions of the 6 models are optional; Suitable for 4 wires, 6 wires and 8 wires stepper motor.
- 5 Protect form: Overheated protection, overcurrent protection, undervoltage protection, prevention of inversion.
- See more on Amazon...
Brand: Twotrees | Manufacturer: Twotrees
Weight: 1.00 pounds
See On Amazon #18
DC 4V-6V 5V 2-Phase 4-Wire Stepper Motor Driver Controller Board Mini Stepping Motor Adjustable Speed Regulator with Remote Control CW CCW Drive Module
Asin: B09BTWQPTB | Model: RCMOTOR-5V | PartNumber: RCMOTOR-5V | Ean: 0723258876844 | UPC: 723258876844
【Fit Motor】: 2-Phase 4-Wire/ 6-Wire Stepper Motor (Can Drive 3V-24V Stepper Motor To Rotate, The Motor Torque Is Different)..
【Guarantee】: Our Adjustable Speed Stepper Motor Controller Have 120 Days Warranty, If You Have Any Question About This Product, Please Feel Free To Contact Us, We Will Try Our Best To Help You Solve Your Problem..
【Easy To Operate】: Stepper Motor Remote Driver Can Control The Forward/Backward Rotation Of The Motor, 0-9 Shifts Adjustable Motor Speed With Digital Display. Press The Remote Control's Number Button To Quickly Change The Motor Speed..
【Driver Specs】: The Drive Voltage Is Dc 4-6V, Which Can Be Powered By Usb, 5V Mobile Phone Charger And Battery. Driving Current 300Ma~500Ma, If More Than This Current, May Not Start The Motor. Pcb Size Is 52*36*10Mm/2.05*1.42*0.39Inch..
Features
- Remote Control : This stepper motor driver can control 2-phase 4-wire stepper motor by motor drive board or IR remote control. If you need a multi-function drive board, please purchase: B09BV4JVLS
- Driver Specs : The drive voltage is DC 4-6V, which can be powered by USB, 5V mobile phone charger and battery. Driving current 300mA~500mA, if more than this current, may not start the motor. PCB size is 52*36*10mm/2.05*1.42*0.39inch.
- Fit Motor : 2-phase 4-wire/ 6-wire stepper motor (can drive 3V-24V stepper motor to rotate, the motor torque is different).
- Easy to Operate : Stepper motor remote driver can control the forward/backward rotation of the motor, 0-9 shifts adjustable motor speed with digital display. Press the remote control's number button to quickly change the motor speed.
- Guarantee : Our adjustable speed stepper motor controller have 120 days warranty, if you have any question about this product, please feel free to contact us, we will try our best to help you solve your problem.
- See more on Amazon...
Brand: QINIZX | Manufacturer: QINIZX
Dimensions: 0.39 x 2.05 x 1.42 inches | Weight: 0.10 pounds
See On Amazon #19
3 PCS of TB6600 Stepper Motor Driver, Abuff 5A 9-40V Nema 17 Stepper Motor Driver CNC Controller Single Axes Hybrid Stepper Motor Controls
Asin: B07GVFTHPT | Ean: 0663585692116 | UPC: 663585692116
【High Safety】Tb6600 Cnc Controller Support Interface That Adopts High-Speed Optocoupler Isolation And Protection For Input Anti-Revers，Over Current And Short Circuit..
【Work Quietly】The Cnc Controllers Are Designed With Extra-Low Motor Noise Which Can Offer Them Excellent Quietness..
【Wide Application】The Hybrid Stepper Motor Is Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
【Over-Heat Protection】Stepper Driver Is Not Only With Large Area Heat Sink And Automatic Semi-Flow To Reduce Heat But Also With Overheat Circuit Protection..
Features
- CONTROL & ADJUSTABLE TB6600 Stepper Motor Drivers support 8 kinds of current control and 7 kinds of micro steps adjustable so that can meet your different need.
- OVER-HEAT PROTECTION Stepper driver is not only with large area heat sink and automatic semi-flow to reduce heat but also with overheat circuit protection.
- HIGH SAFETY TB6600 CNC controller support interface that adopts high-speed optocoupler isolation and protection for input anti-revers over current and short circuit.
- WIDE APPLICATION The hybrid stepper motor is suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- WORK QUIETLY The CNC controllers are designed with extra-low motor noise which can offer them excellent quietness.
- See more on Amazon...
Brand: ABuff | Manufacturer: ABUFF
Weight: 0.44 pounds
See On Amazon #20
Stepper Motor Controller Board, Stepping Motor Drive Controller Speeds Regulation Positive Negative Rotation Control for MKS OSC
Asin: B08CBGRPMJ | Model: Vikyewe19d6vc8g | PartNumber: Vikyewe19d6vc8g | Ean: 8407376793284
[Feature]: This Simple Controller + Stepper Driver + Stepper Motor + Dc Power Supply Can Form A Simple Control Platform..
[Pwm]: It Can Generate Pulse Signal And Pwm Signal, And Can Be Selected By Jumping. Frequency Measurement: Can Measure Pul And Common Cathode (Or Common Anode) Two Port..
[Specification]: The Controller Has A Total Of 3 Kinds Of Frequency Signals: High 5.4K-160Khz, Medium 540-16.6Khz, Low 80-2.4Khz..
[Note]: To Control The Stepper Motor, It Must Be Equipped With A Driver..
Features
- [Stepping Motor Controller]: This module is a pulse generation module and supplies stepper driver as a signal.
- [Note]: To control the stepper motor, it must be equipped with a driver.
- [Feature]: This simple controller + stepper driver + stepper motor + DC power supply can form a simple control platform.
- [Specification]: The controller has a total of 3 kinds of frequency signals: high 5.4k-160khz, medium 540-16.6khz, low 80-2.4khz.
- [PWM]: It can generate pulse signal and PWM signal, and can be selected by jumping. Frequency measurement: Can measure PUL and common cathode (or common anode) two port.
- See more on Amazon...
Brand: Vikye | Manufacturer: Vikye
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.06 pounds
See On Amazon
Looking For Something Else?
Search