uxcell 14mm Diamond Drill Bits Hole Saws for Glass Tile Porcelain Marble Ceramic Bottles Pots Brick Pack of 10
Asin: B07MR2KLVR | Model: a18112200ux0244 | PartNumber: a18112200ux0244
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Large Clearance Hole: The Diamond Hole Saw With Clearance Hole Facilitates The Entry Of Cooling Water And The Escape Of Chips From The Drilled Hole. Makes The Drilling Process Easier. The Cutting Is Flat And Smooth Without Scratches..
Tips: Use At Low Drilling Speeds And Drilling Pressure. Always Work With Coolant (Water) When Drilling. Not Suited For Concrete Or Depth Beyond About 1/2 Inch. The Hole Should Be Entered Smoothly, And No Side Pressure Is Applied..
Features: Diamond Coating Maximizes Performance And Retains A Sharper Cutting Edge Than Traditional Carbide Or Bimetal Hole Saws. Nickel Plating On These Bits Maximizes Your Tools Life With Great Resistance To Corrosion..
Wide Applications: Suitable For Cutting Accurate Holes On Glass, Ceramic, Tile, Porcelain, Marble, Stone Bottles And Pots. Not Suitable For Drilling Tempered Glass, Plastic And Wood..
Features
- Diamond Drill Bits: Electroplated diamond is uniform and more wear-resistant. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
- Wide Applications: Suitable for cutting accurate holes on glass, ceramic, tile, porcelain, marble, stone bottles and pots. Not suitable for drilling tempered glass, plastic and wood.
- Large Clearance Hole: The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. The cutting is flat and smooth without scratches.
- Features: Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws. Nickel plating on these bits maximizes your tools life with great resistance to corrosion.
- Tips: Use at low drilling speeds and drilling pressure. Always work with coolant (water) when drilling. Not suited for concrete or depth beyond about 1/2 inch. The hole should be entered smoothly, and no side pressure is applied.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 3.94 x 2.36 inches
See On Amazon Similar To uxcell 14mm Diamond Drill Bits
#1
uxcell Reduced Shank Twist Drill Bits 14mm High Speed Steel 4341 with 10mm (3/8") Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CXCFD1 | Model: a19102500ux0063 | PartNumber: a19102500ux0063
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 14mm / 0.55"; Shank Diameter : 10mm / 3/8"; Cutting Edge Length: 56mm / 2.2"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell 1mm Diamond Twist Drill Bits High Speed Steel for Glass Sea Shells Stone Tiles 10 Pcs
Asin: B07R76ZZG4
[Applicable Machine] - Widely Used In Rotary Tool Such As Hand Drills, Drill Press, Flex Shafts, Bench Drill And Hanging Mill..
[Notice] - When Drilling, It Is Necessary To Add Cutting Fluid In Time To Lubricate And Cool Down, Which Can Get A Better Drilling Hole Wall, Extends The Service Life And Drilling Accuracy..
[Application] - Suitable For Drilling Small Holes On Glass, Soft Metal, Sea Shells, Jade, Pearls, Drywall And Son On..
[Material] - Diamond Coated High Speed Steel(Hss) Is Made By Spiral Technology, Has Both Toughness And Hardness, Is Not Easy To Break. The Drill Bit Is Sharp, And Is Easy For Chip Removal..
Features
- [SIZE] - 1mm diameter, 11mm length twist drill bit with 0.7mm shank.
- [MATERIAL] - Diamond coated high speed steel(HSS) is made by spiral technology, has both toughness and hardness, is not easy to break. The drill bit is sharp, and is easy for chip removal.
- [APPLICABLE MACHINE] - Widely used in rotary tool such as hand drills, drill press, flex shafts, bench drill and hanging mill.
- [APPLICATION] - Suitable for drilling small holes on glass, soft metal, sea shells, jade, pearls, drywall and son on.
- [NOTICE] - When drilling, it is necessary to add cutting fluid in time to lubricate and cool down, which can get a better drilling hole wall, extends the service life and drilling accuracy.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell Straight Shank Twist Drill Bit 14mm High Speed Steel 4341 with 10mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CYLSQ9 | Model: a19102500ux0152 | PartNumber: a19102500ux0152
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 14mm / 0.55"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 112mm / 4.41"; Total Length : 160mm / 6.3"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell Masonry Drill Bit 14mm x 200mm Carbide Tipped Rotary Hammer Bit 10mm Round Shank for Impact Drill
Asin: B07J4H87TT | Model: a18081100ux0365 | PartNumber: a18081100ux0365
Flute Design: Optimized Flute Design To Reduce Bit Stress And Make The Bit Run Cooler For Long Life..
Wide Use: Designed For Fast Drilling In Concrete, Masonry, Artificial Stone, And Rock.
Centric Tip: Centric Tip For Optimal Hole Geometry And Provides Rounder Holes. For Use In Drill Requiring Special Direct System Shank.
Carbide Tip: Carbide-Tipped Drill Bit Head Is Harder And Tougher To Extreme Loads. 2-Flute Design For Fast Dust Removal.
Features
- Features: Diameter :14mm / 0.55"; Useable Length : 125mm / 5.0"; Total Length : 200mm / 7.87"; Shank Size : 10mm / 0.39"
- Carbide Tip: Carbide-tipped drill bit head is harder and tougher to extreme loads. 2-flute design for fast dust removal
- Flute Design: Optimized flute design to reduce bit stress and make the bit run cooler for long life.
- Centric Tip: Centric tip for optimal hole geometry and provides rounder holes. For use in drill requiring Special Direct System shank
- Wide Use: Designed for fast drilling in concrete, masonry, artificial stone, and rock
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 9.06 x 1.18 Inches
See On Amazon #5
uxcell High Speed Steel Hex Shank Twist Drill Bit, 14mm Drilling Dia with 1/4 Inch Hex Shank 156mm Length
Asin: B09YV1WT5J | Model: a22032200ux1088 | PartNumber: a22032200ux1088
135-Degree Split Point Tip Design: Can Drill With Less Force And Good Radial Stability. Easier Chip Evacuation, Better Heat Dissipation And Increased Drill Durability..
Quick Change: Compared With The Ordinary Drill, With A Quick Change Hexagonal Handle, Handle Diameter 6.35Mm (1/4 "), Fixture Is More Stable, More Convenient To Replace..
Application: Suitable For Drilling Holes In Alloy Steel, Wood, Nonferrous Metal, Cast Iron And Hard Plastics.
Material: Made Of High Speed Steel With Dual Coating Of Gold Titanium And Black Nitride For Better Lubrication, Smoother Drilling. Increase The Hardness Of The Drill, With Good Wear Resistance And Durability..
Features
- Specification: Shank: 1/4-inch Hex; Drill Diameter: 14mm / 0.55-inch; Total Length: 156mm / 6.14-inch; Drill Bit Length: 105mm / 4.13-inch; 1 x Twist Drill Bits
- Material: Made of high speed steel with dual coating of gold titanium and black nitride for better lubrication, smoother drilling. Increase the hardness of the drill, with good wear resistance and durability.
- 135-degree Split Point Tip Design: Can drill with less force and good radial stability. Easier chip evacuation, better heat dissipation and increased drill durability.
- Application: Suitable for drilling holes in alloy steel, wood, nonferrous metal, cast iron and hard plastics
- Quick Change: Compared with the ordinary drill, with a quick change hexagonal handle, handle diameter 6.35mm (1/4 ), fixture is more stable, more convenient to replace.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell Reduced Shank Twist Drill Bits 14mm High Speed Steel 4241 with 10mm Shank for Aluminum Alloy Steel Metal Plastic Wood
Asin: B082CWWBFT | Model: a19102500ux0088 | PartNumber: a19102500ux0088
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Versatile Uses: For Use In A Wide Range Of Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Sharp & Spiral Flutes: Sharp Spiral Flutes Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering High Hardness And Toughness For Wear Resistance. Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant..
Features
- Features: Cutting Edge Diameter : 14mm / 0.55"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 105mm / 4.13"; Total Length : 160mm / 6.3"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering high hardness and toughness for wear resistance. Black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Sharp & Spiral Flutes: Sharp Spiral flutes provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip.
- Versatile Uses: For use in a wide range of aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #7
uxcell Straight Shank Twist Drill Bits 14mm High Speed Steel 4341 with 10mm Shank 2 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082DBBZ8P | Model: a19102500ux0153 | PartNumber: a19102500ux0153
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 14mm / 0.55"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 112mm / 4.41"; Total Length : 160mm / 6.3"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #8
uxcell Reduced Shank Drill Bit 14.5mm High Speed Steel HSS 9341 Black Oxide with 1/2 Inch Straight Shank
Asin: B07KS4GD4R | Model: a18101200ux0139 | PartNumber: a18101200ux0139
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 14.5mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 5.51 x 3.94 inches
See On Amazon #9
uxcell 13.5mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank
Asin: B07MQ3W8PX | Model: a18103100ux0175 | PartNumber: a18103100ux0175
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 13.5mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 7.48 x 1.57 inches
See On Amazon #10
uxcell 5Pcs 14mm Diamond Coated Hole Saw Drill Bits for Glass Ceramic Tile Marble Rock Porcelain Bottles Pots Brick
Asin: B071XHBKKG | Model: a16121200ux1003 | PartNumber: a16121200ux1003
Nickel Plated Surface - Nickel Plating Surface Can Extend The Service Life And Enhance The Surface Corrosion Resistance. Diamond Coating Maximizes Performance And Retains A Sharper Cutting Edge Than Traditional Carbide Or Bimetal Hole Saws..
Applications - Perfect For Drilling Glass, Ceramics, Porcelain, Ceramic Tile, Porcelain Tile, Limestone, Slate, Marble, Light Stone And Fiberglass. (Need To Be Used At A Low Speed; Always Use Lubrication (Water) When Processing, Otherwise The Hole Saw Will Burn.).
Special Design - The Diamond Hole Saw With Clearance Hole Facilitates The Entry Of Cooling Water And The Escape Of Chips From The Drilled Hole. Makes The Drilling Process Easier. Not Suitable For Drilling Tempered Glass, Plastic And Wood..
Diamond Coated - Diamond Coating Enhances The Drilling Speed, Which Makes The Bit More Sharp.Electroplated Diamond Is Uniform And More Wear-Resistant..
Features
- SIZE - 14mm(9/16-inch) Drilling Diameter, 6.5mm(0.25-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
- DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.
- NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
- SPECIAL DESIGN - The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. Not suitable for drilling tempered glass, plastic and wood.
- APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 5.51 x 3.94 inches
See On Amazon #11
uxcell Reduced Shank Drill Bit 14mm High Speed Steel HSS 9341 Black Oxide with 1/2 Inch Straight Shank
Asin: B07KS3TF8S | Model: a18101200ux0153 | PartNumber: a18101200ux0153
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 14mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 5.51 x 3.94 inches | Weight: 0.00 pounds
See On Amazon #12
uxcell 2.5mm Diamond Twist Drill Bits High Speed Steel for Glass Sea Shells Stone Tiles 10 Pcs
Asin: B07RBKHZMR
[Applicable Machine] - Widely Used In Rotary Tool Such As Hand Drills, Drill Press, Flex Shafts, Bench Drill And Hanging Mill..
[Notice] - When Drilling, It Is Necessary To Add Cutting Fluid In Time To Lubricate And Cool Down, Which Can Get A Better Drilling Hole Wall, Extends The Service Life And Drilling Accuracy..
[Application] - Suitable For Drilling Small Holes On Glass, Metal, Sea Shells, Jade, Pearls, Marble, Stones, Drywall And Son On. Due To The Different Hardness Of The Material, The Effect Is Also Different..
[Material] - Diamond Coated High Speed Steel(Hss) Is Made By Spiral Technology, Has Both Toughness And Hardness, Is Not Easy To Break. The Drill Bit Is Sharp, And Is Easy For Chip Removal..
Features
- [SIZE] - 2.5mm diameter, 25mm length twist drill bit with 2.3mm shank.
- [MATERIAL] - Diamond coated high speed steel(HSS) is made by spiral technology, has both toughness and hardness, is not easy to break. The drill bit is sharp, and is easy for chip removal.
- [APPLICABLE MACHINE] - Widely used in rotary tool such as hand drills, drill press, flex shafts, bench drill and hanging mill.
- [APPLICATION] - Suitable for drilling small holes on glass, metal, sea shells, jade, pearls, marble, stones, drywall and son on. Due to the different hardness of the material, the effect is also different.
- [NOTICE] - When drilling, it is necessary to add cutting fluid in time to lubricate and cool down, which can get a better drilling hole wall, extends the service life and drilling accuracy.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell 4 Pcs 14mm High Speed Steel HSS Drill Bit Hole Saw for Metal Alloy Wood
Asin: B07HCJ9DMK | Model: a18072800ux0419 | PartNumber: a18072800ux0419
Hole Drill Bit Is With Special Heat Treatment, Sharp Edge, High Strength..
Hole Saw Is Suitable For Hand-Held Electric Drill, Vertical Electric Drill And Mobile Belt Magnetic Drilling Machine..
Perfect For Installing Locks, Knobs In Doors And Cabinets Or Drilling Larger Diameter Holes Through Desks Etc..
14Mm Hole Saw Cut Clean, Round Holes In Iron, Aluminium, Alloy, Plastic, Wood, Etc...
Features
- Hole saw is made of high speed steel, impact resistance, wear resistance.
- 14mm Hole Saw cut clean, round holes in iron, aluminium, alloy, plastic, wood, etc..
- Hole drill bit is with special heat treatment, sharp edge, high strength.
- Perfect for Installing Locks, Knobs in Doors and Cabinets or Drilling Larger Diameter Holes Through Desks Etc.
- Hole Saw is suitable for hand-held electric drill, vertical electric drill and mobile belt magnetic drilling machine.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell Reduced Shank Twist Drill Bits 13.5mm High Speed Steel 6542 with 10mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D5FSXB | Model: a19102500ux0079 | PartNumber: a19102500ux0079
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 13.5mm / 0.53"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 55mm / 2.17"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #15
uxcell 14mm HSS Drill Bit Hole Saw Cutter for Metal Alloy Wood
Asin: B07HCJ7R5Z | Model: a18072800ux0417 | PartNumber: a18072800ux0417 | Ean: 0714998259110 | UPC: 714998259110
Hole Drill Bit Is With Special Heat Treatment, Sharp Edge, High Strength..
Suitable For Hand-Held Electric Drill, Vertical Electric Drill And Mobile Belt Magnetic Drilling Machine..
Perfect For Installing Locks, Knobs In Doors And Cabinets Or Drilling Larger Diameter Holes Through Desks Etc..
14Mm Hole Saw Cut Clean, Round Holes In Iron, Aluminum Plate, Alloy Plate, Plastic Sheet..
Features
- Hole saw is made of HSS high speed steel, impact resistance, wear resistance.
- 14mm Hole Saw cut clean, round holes in iron, aluminum plate, alloy plate, plastic sheet.
- Hole drill bit is with special heat treatment, sharp edge, high strength.
- Perfect for Installing Locks, Knobs in Doors and Cabinets or Drilling Larger Diameter Holes Through Desks Etc.
- Suitable for hand-held electric drill, vertical electric drill and mobile belt magnetic drilling machine.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell 14mm Sintered Diamond Core Drill Bits Hole Saws, Dry or Wet Drilling for Brick Concrete Block Masonry Marble, for M10 Angle Grinder, 2 Pcs
Asin: B09F9DR4C4
Fit For Angle Grinder: Easily Operate On The M10 Angle Grinder (Not Included Here). Or Need An Adapter For Drill Or Other Machine, Such As Hex, Round Shank Etc. (Not Included Here). Cannot Be Used On Impact Power Tools..
Notices: When Cutting Holes, It Needs To Be Positioned At An Angle Of 45 Degree And Make A Crescent-Shaped Trace On The Material. Then Cut Holes Vertically And Need To Be Cooled With Water..
Features: Large Clearance Hole Facilitates The Entrance Of Cooling Water And The Escape Of Chips And Other Particles From Drilling. Makes Drilling Process Much Easier..
Application: Can Be Dry Or Wet Drilling. To Prolong The Using Life, It Is Recommended To Be Used With Water For Cooling And Lubrication. Drill Accurate Holes On Concrete, Masonry, Hard Brick, Marble, Stone, Marble, Glass, Tile And Other Hard Materials..
Features
- Diamond Drill Bits: 14mm cutting diameter. Sintered diamond cutting edge contains diamond particles from inside to outside, to ensure that the edge is always sharp.
- Application: Can be dry or wet drilling. To prolong the using life, it is recommended to be used with water for cooling and lubrication. Drill accurate holes on concrete, masonry, hard brick, marble, stone, marble, glass, tile and other hard materials.
- Fit for Angle Grinder: Easily operate on the M10 Angle Grinder (not included here). Or need an adapter for drill or other machine, such as hex, round shank etc. (not included here). Cannot be used on impact power tools.
- Features: Large clearance hole facilitates the entrance of cooling water and the escape of chips and other particles from drilling. Makes drilling process much easier.
- Notices: When cutting holes, it needs to be positioned at an angle of 45 degree and make a crescent-shaped trace on the material. Then cut holes vertically and need to be cooled with water.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell Rubber Grommet Round Double-Sided Mount Dia 20 mm for Wire Protection 20pcs
Asin: B099NLFSPD | Model: a21042200ux0131 | PartNumber: a21042200ux0131
[Material] Made Of Rubber, Soft, Durable And Heat Resistant..
[Application] To Protect Wires, Cables, Cords And Pipes Away From Rough Surface. Widely Used In House, Office, Industry, Boat, Etc...
[Hole Adjustable] The Grommets Offers A Wide Selection Of Diameters, Tight Or Loose Your Cord, Please Make Center Holes As Needed. With Pre Made Slot, Easy To Drill Hole..
[Other Size] Inner Diameter: 15 Mm / 0.59-Inch; Overall Size: 26 X 8.5Mm / 1.02 X 0.33-Inch(Dia*T)..
Features
- [MAIN PARAMETER] Mounting Diameter /Drill Hole Diameter: 20 mm / 0.79-inch; Groove Thickness: 2mm; Type: Double-Sided.
- [OTHER SIZE] Inner Diameter: 15 mm / 0.59-inch; Overall Size: 26 x 8.5mm / 1.02 x 0.33-inch(Dia*T).
- [MATERIAL] Made of rubber, soft, durable and heat resistant.
- [HOLE ADJUSTABLE] The grommets offers a wide selection of diameters, tight or loose your cord, please make center holes as needed. With pre made slot, easy to drill hole.
- [APPLICATION] To protect wires, cables, cords and pipes away from rough surface. Widely used in house, office, industry, boat, etc..
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell 14mm Diamond Core Drill Bits Dry or Wet Hole Saws for Hard Concrete Brick Block Masonry Stone
Asin: B091HNWF5X
Dry Or Wet Drilling: Can Be Dry Or Wet Drilling. To Prolong The Using Life, It Is Recommended To Be Used With Water For Cooling And Lubrication..
Sharp Cutting Edge: The Core Drill Bits Cut Clean And Fast Holes, And Make Drilling Process Much Easier..
Large Clearance Hole: Facilitates The Entrance Of Cooling Water And The Escape Of Chips And Other Particles From Drilling..
Applications: Suitable For Drilling Concrete, Masonry, Hard Brick, Marble, Stone, And Other Hard Materials..
Features
- Drilling diameter: 14mm / 0.55"; drilling depth: 10mm / 0.39"; shank size: 9.5mm / 0.37". Non-slip triangle shank fits most electric hand drills and bench drills.
- Applications: Suitable for drilling concrete, masonry, hard brick, marble, stone, and other hard materials.
- Dry or Wet Drilling: Can be dry or wet drilling. To prolong the using life, it is recommended to be used with water for cooling and lubrication.
- Large Clearance Hole: Facilitates the entrance of cooling water and the escape of chips and other particles from drilling.
- Sharp Cutting Edge: The core drill bits cut clean and fast holes, and make drilling process much easier.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 14mm Reduced Shank Cemented Carbide Twist Drill Bits for Hardened Steel Stainless Steel, 1/2 Inch Straight Shank
Asin: B09X9R1CFQ | Model: a22021600ux0362 | PartNumber: a22021600ux0362
[Versatile Uses] -Cemented Carbide Drill Bit Can Clean, Accurate Holes In Sheet Metal, Steel, Copper, Brass, Aluminum, Plastic, Wood, Stainless Steel And Cast Iron..
[Use Note] - Please Use Low Speed When Drilling And Note The Temperature Of Carbide Tip Is Not Too High For Extending Drill Bit Life..
[Reduced Shank] - Reduced Shank Twist Drill Bit Can Work With A Electric Drill (Electric Drill Not Included)..
[Features] - Milled U-Flutes With Deep-Cut Spiral Deliver Fast Material Removal. Suitable For Drilling In Tough Metal, Including Abrasive Alloy And Hardened Steel..
Features
- [Cemented Carbide] - Twist drill bits are made of cemented carbide tip for easier drilling into any hard objects, long service life, it is more sharp and durable than others.
- [Features] - Milled U-flutes with deep-cut spiral deliver fast material removal. Suitable for drilling in tough metal, including abrasive alloy and hardened steel.
- [Versatile Uses] -Cemented carbide drill bit can clean, accurate holes in sheet metal, steel, copper, brass, aluminum, plastic, wood, stainless steel and cast iron.
- [Reduced Shank] - Reduced shank twist drill bit can work with a electric drill (electric drill not included).
- [Use Note] - Please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search