Ximimark 2Pcs BTS7960 Stepper Motor Driver Module High Power H-Bridge PWM Driver Board 43A Current Limit Control Module For Arduino Smart Car
Asin: B07MYXXLXT | Model: LY267 | PartNumber: LY267 | Ean: 0657835650315 | UPC: 657835650315
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Just Need Four Lines From Mcu To Driver Module (Gnd. 5V. Pwm1. Pwm2)..
Two Heat Flow Passing Through An Error Signal Output..
Able To Reverse The Motor Forward, Two Pwm Input Frequency Up To 25Khz..
5V Power Indicator On Board;Voltage Indication Of Motor Driver Output End.Can Solder Heat Sink..
Features
- 5V isolate with MCU, and effectively protect MCU;isolation chip 5 V power supply (can share with MCU 5 V).
- 5V power indicator on board;voltage indication of motor driver output end.Can solder heat sink.
- Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2).
- Able to reverse the motor forward, two PWM input frequency up to 25kHZ.
- two heat flow passing through an error signal output.
- See more on Amazon...
Brand: Ximimark | Manufacturer: Ximimark
See On Amazon Similar To Ximimark 2Pcs BTS7960 Stepper Motor
#1
ELEGOO 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board Compatible with Arduino
Asin: B01CP18J4A | Model: EL-SM-003 | PartNumber: EL-SM-003 | Ean: 0746591610357 | UPC: 746591610357
5 Line 4 Phase Can Be Used For Ordinary Uln2003 Chip Driver, Connect To The 2 Phase , Support The Development Board，With Convenient Use, Direct Docking.
Great Packing In A Box : 5 Set Uln2003 Stepper Motor + Driver Board (With A Little Gift).
Drive Module Board Size(In): 1.37*1.18*0.6 ; Stepper Motor Diameter: 1.06(In) ; Stepper Motor Lines: 9.45(In).
A, B, C, D Four-Phase Led Indicates The Status Of The Stepper Motor Work..
Features
- Stepper motor with a standard interface, when used directly pluggable.
- A, B, C, D four-phase LED indicates the status of the stepper motor work.
- 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board With convenient use, direct docking
- Drive Module Board Size(in): 1.37*1.18*0.6 ; Stepper Motor diameter: 1.06(in) ; Stepper Motor lines: 9.45(in)
- Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board (with a little gift)
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 2.00 x 5.00 x 5.00 inches
See On Amazon #2
STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-Lead W/ 1m Cable and Connector Compatible with 3D Printer/CNC
Asin: B00PNEQKC0 | Model: 17HS19-2004S | PartNumber: 17HS19-2004S
Ean: 0701056358779, 0798167993654, 5915903798815, 0789164236554, 0715624560631, 0191579035491, 0191388825313, 0712322835252, 0190657686020
UPC: 191388825313, 798167993654, 191579035491, 701056358779, 190657686020, 712322835252, 789164236554, 715624560631
Nema 17 Bipolar 1.65"X1.65"X1.89" 4-Wire.
Rated Current 2.0A & Resistance 1.4Ohms.
Build With 39.37"( 1M) Cable And 0.1" Pitch Connector.
59Ncm(83.6Oz.In) Holding Torque.
Features
- 3D printer motor with high torque
- 59Ncm(83.6oz.in) holding torque
- NEMA 17 bipolar 1.65x1.65x1.89 4-wire
- Build with 39.37( 1m) Cable and 0.1 pitch Connector
- Rated current 2.0A & resistance 1.4ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OSM Technology Co.,Ltd.
Dimensions: 1.89 x 1.65 x 1.65 inches | Weight: 0.88 pounds
See On Amazon #3
STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-Step Resolutions for Nema 17 and 23 Stepper Motor
Asin: B06Y5VPSFN | Model: DM542T | PartNumber: DM542T | Ean: 0715624558829, 0715776647549, 0714485410482 | UPC: 714485410482, 715624558829, 715776647549
1.0~4.2A, 20~50Vdc, 1/128 Microstep Resolution.
100% Service Satisfactory. We Provided This Stepper Motor Kit With 30 Days Free Replacement Or Refund, 1 Year Warranty And Whole Life Customer Service From The Date Of Purchasing..
Pulse Signal: 4-5V When Pul-High, 0-0.5V Whenpul-Low. The Same As Dir And Ena Signals.
Industrial-Grade Stepper Driver, Suit For Nema 17 And 23 Stepper Motor.
Features
- Stepper motor driver DM542T is updated to version V4.0, add 5V/24V logical voltage selector, alarm outputs. Please attention, Factory setting is 24V, if you need to use 5V, switch selector on the top of the driver.
- Industrial-grade Stepper Driver, Suit for Nema 17 and 23 Stepper Motor
- 1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution
- Pulse signal: 4-5V when PUL-HIGH, 0-0.5V whenPUL-LOW. The same as DIR and ENA signals
- 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing.
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OMC CORPORATION LIMITED
Dimensions: 1.00 x 0.00 x 2.97 Inches | Weight: 0.46 pounds
See On Amazon #4
EASON Stepper Motor Driver TB6600 4A DC9-42V 32 Subdivision for Nema 17, 23 Series Stepper Motor CNC Controller Single Axis Hybrid MicroStepping
Asin: B08SG7L54W | Ean: 0653871352206 | UPC: 653871352206
Suitable For Drive Two-Phase Stepping Motor Dynamic Voltage 9V To 42V, The Maximum Drive Current Is Less Than 4A..
Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
Suitable For Step Motor:Nema(17,23) 42, 57 Type 2 Phase 4 Phase (4 / 6 / 8 Wires).
The Subdivision Is Increased To 32 Subdivision, Which Is Suitable For High Subdivision..
Features
- This driver is an upgraded version of TB6600 and with plastic cover.
- The subdivision is increased to 32 subdivision, which is suitable for high subdivision.
- Suitable for drive Two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A.
- Suitable for step motor:NEMA(17,23) 42, 57 type 2 phase 4 phase (4 / 6 / 8 wires)
- Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- See more on Amazon...
Brand: Eason | Manufacturer: Yisheng Technology
Dimensions: 0.00 x 3.74 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #5
STEPPERONLINE Short Body Nema 17 Bipolar Stepper Motor 1A 22.6oz.in/16Ncm DIY CNC Extruder
Asin: B00PNEQ79Q | Model: 17HS08-1004S | PartNumber: 17HS08-1004S | Ean: 5269692731844, 4139052218043, 7038557197372, 0701056346851 | UPC: 701056346851
Nema 17 Bipolar 1.65X1.65X0.79 4-Wire.
Rated Current 1.0A & Resistance 3.5Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
16Ncm(22.6Oz.In) Holding Torque.
Features
- Small Size, Short Height
- 16Ncm(22.6oz.in) holding torque
- NEMA 17 bipolar 1.65x1.65x0.79 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 1.0A & resistance 3.5ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OSM Technology Co.,Ltd.
Dimensions: 0.79 x 1.65 x 1.65 inches
See On Amazon #6
HiLetgo 5pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board for Arduino PI PIC Raspberry Pi
Asin: B00LPK0E5A | Model: 3-01-0153 | PartNumber: 3-01-0153 | Ean: 0702082654729 | UPC: 702082654729
Diameter: 28Mm.
Speed Down Stepping Motor.
Voltage: 5V.
Stepping Angle: 5.625 X 1/64.
Features
- HiLetgo Stepper Motor+ Driver Board
- Stepping angle: 5.625 X 1/64
- Diameter: 28mm
- Voltage: 5V
- Speed down stepping motor
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #7
CNC Digital Stepper Driver DM556 Stepper Motor Controller 2-phase Stepper Motor Driver 20-50V DC Max 5.6A 128 subdivision For Nema 23, 24 and Nema 34 stepper motor
Asin: B08J3NFF9V | Ean: 0791548328502 | UPC: 791548328502
Anti-Resonance For Optimal Torque, Extra Smooth Motion, Low Motor Heating And Noise.
Please Note: If There Is Any Problem, Please Feel Free To Contact Us, Each Defect Items Could Be Refunded Or Reshipped, We Will Try Out Utmost To Support You..
Package: 1Piece Dm556 Driver.
This High Subdivision Driver Is Suitable For High Subdivision Motor. Suitable For Stepper Motor: 57,60,86 Type 2-Phase (4-Wire, 6-Wire, 8-Wire).
Features
- Suitable for Nema 23 ,Nema 24 and Nema34 Stepper Motor 2-phase hybrid stepper motors (Outer diameter: 57, 60,86mm).
- This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor: 57,60,86 type 2-phase (4-wire, 6-wire, 8-wire)
- Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
- Package: 1piece DM556 driver
- PLEASE NOTE: if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you.
- See more on Amazon...
Brand: HoCenWay | Manufacturer: HONGCHENWEI
Dimensions: 1.34 x 4.41 x 2.97 inches
See On Amazon #8
HiLetgo BTS7960 43A Dual H-Bridge Stepper Motor Drive Current Limit Control Semiconductor Refrigeration PWM for Smart Car Motor Drive Arduino
Asin: B00WSN98DC | Model: 3-01-0833 | PartNumber: 3-01-0833 | Ean: 0702949574993, 0696761773989 | UPC: 702949574993, 696761773989
Just Need Four Lines From Mcu To Driver Module (Gnd. 5V. Pwm1. Pwm2); Isolation Chip 5 V Power Supply (Can Share With Mcu 5 V)..
Isolated Chip 5V Power Supply (Can Be Shared With The Mcu 5V), Can Also Use The On-Board 5V Supply; The Supply Voltage 5.5V To 27V..
Able To Reverse The Motor Forward, Two Pwm Input Frequency Up To 25Khz; Two Heat Flow Passing Through An Error Signal Output..
Voltage Indication Of Motor Driver Output End; Can Solder Heat Sink..
Features
- 5V isolate with MCU, and effectively protect MCU; 5V power indicator on board.
- Voltage indication of motor driver output end; can solder heat sink.
- Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2); isolation chip 5 V power supply (can share with MCU 5 V).
- Able to reverse the motor forward, two PWM input frequency up to 25kHZ; two heat flow passing through an error signal output.
- Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; the supply voltage 5.5V to 27V.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 5.00 x 5.00 x 5.00 inches | Weight: 0.11 pounds
Warranty: Permanent warranty
See On Amazon #9
cciyu 2Pack Universal X27 168 Stepper Motor Instrument Cluster Repair Speedometer Gauge
Asin: B075GK9NBH | Model: 803570-5210-1430581 | PartNumber: 803570-5210-1430581 | Ean: 0611040267140 | UPC: 611040267140
To Repair Speedometer, Tachometer, Fuel, Temp Or Any Other Gauges..
Attention:Make Sure You Can Handle This Work, It May Need Some Professional Equipment Of Pc Boards..
Application: For Instrument Panel,Gauge Cluster,Temp Gauge,Tachometer,Speedometer.
Fixed Problems Like(Caused By Motor Stepper):Gauge's Sticking, Shuttering;Chatters,Inaccurate;Gauge Giving False Readings;Staying Pegging Out;Gauge Dead,Etc..
Features
- Feature:2Pack white Stepper motor,less than20mA,5V
- Fixed problems like(caused by Motor Stepper):Gauge's sticking, shuttering;chatters,inaccurate;Gauge giving false readings;staying pegging out;Gauge dead,etc.
- To repair speedometer, tachometer, fuel, temp or any other gauges.
- Application: For Instrument Panel,Gauge Cluster,Temp Gauge,Tachometer,Speedometer
- Attention:Make sure you can handle this work, it may need some professional equipment of PC Boards.
- See more on Amazon...
Brand: cciyu | Manufacturer: cciyu
Dimensions: 0.04 x 0.08 x 0.08 Inches | Weight: 0.07 Pounds
See On Amazon #10
STEPPERONLINE Nema 23 Stepper Motor 2.4Nm(339.79oz.in) 4.0A 8mm Shaft 57x57x82mm 4 Wires
Asin: B091C37FJ2 | Model: 23HS32-4004S | PartNumber: 23HS32-4004S | Ean: 0750226819848 | UPC: 750226819848
Nema 23 Motor Driving Voltage Is 24-48Vdc, Suggest 36 Vdc.
1.8 Deg. Step Angle(200 Steps/Rev).
*Rated Current/Phase: 4.0A, Phase Resistance: 0.65Ohms.
2.4Nm(339.79Oz.In) Holding Torque.
Features
- Nema 23 stepper motor with 8mm shaft
- 2.4Nm(339.79oz.in) Holding Torque
- Nema 23 motor driving voltage is 24-48VDC, suggest 36 VDC
- *Rated Current/phase: 4.0A, Phase Resistance: 0.65ohms
- 1.8 deg. step angle(200 steps/rev)
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
Weight: 2.65 Pounds
See On Amazon #11
STEPPERONLINE Nema 17 Stepper Motor 2A 55Ncm Bipolar 1.8 Degree 4-Lead for 3D Printer CNC Extruder,1 Pack
Asin: B0B93HTR87 | Model: 17HE19-2004S | PartNumber: 17HE19-2004S
Step Angle 1.8Deg, 200 Step/Revolution.
Low Noise High Troque 3D Printer Stepper Motor, Build With 1M Cable And Connector.
Rated Current/Phase 2A & Phase Resistance 1.3Ohms.
Bipolar Stepper Motor ,Dimension 42*42*48Mm, 2 Phase, 4 Leads.
Features
- Nema 17 Stepper Motor with 55Ncm holding troque
- Bipolar stepper motor ,dimension 42*42*48mm, 2 phase, 4 leads
- Step angle 1.8deg, 200 step/revolution
- Rated Current/phase 2A & Phase Resistance 1.3ohms
- Low noise high troque 3d printer stepper motor, build with 1m Cable and Connector
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
Dimensions: 1.89 x 1.65 x 1.65 Inches | Weight: 0.88 pounds
See On Amazon #12
8Pack Gauge Cluster Stepper Motor X27 168 Instrument Repair Speedometer
Asin: B075GHYLVN | Model: 803574-5210-1503241 | PartNumber: 803574-5210-1503241 | Ean: 0611040267188 | UPC: 611040267188
To Repair Speedometer, Tachometer, Fuel, Temp Or Any Other Gauges..
Attention:Make Sure You Can Handle This Work, It May Need Some Professional Equipment Of Pc Boards..
Application: For Instrument Panel,Gauge Cluster,Temp Gauge,Tachometer,Speedometer.
Fixed Problems Like(Caused By Motor Stepper):Gauge's Sticking, Shuttering;Chatters,Inaccurate;Gauge Giving False Readings;Staying Pegging Out;Gauge Dead,Etc..
Features
- Feature:8Pack white Stepper motor,less than20mA,5V
- Fixed problems like(caused by Motor Stepper):Gauge's sticking, shuttering;chatters,inaccurate;Gauge giving false readings;staying pegging out;Gauge dead,etc.
- To repair speedometer, tachometer, fuel, temp or any other gauges.
- Application: For Instrument Panel,Gauge Cluster,Temp Gauge,Tachometer,Speedometer
- Attention:Make sure you can handle this work, it may need some professional equipment of PC Boards.
- See more on Amazon...
Brand: cciyu | Manufacturer: cciyu
Dimensions: 0.04 x 0.08 x 0.08 inches
See On Amazon #13
Twotrees Nema 17 Stepper Motor + Stepper Motor Driver, TB6600 4A 9-42V Nema 17/23 CNC Controller Single Axes Hybrid - Upgraded Version
Asin: B07PNZRPQH | Model: 2012-02-21 | PartNumber: 2012-02-21 | Ean: 8431269736331
【3】Motor Driver: 9V-42V Dc Power Supply, H-Bridges Bipolar Constant Phase Current Drive. The Maximum 4.0A Of The Eight Types Of Output Current..
【5】Protect Form: Overheated Protection, Overcurrent Protection, Undervoltage Protection, Prevention Of Inversion..
【4】The Largest 32 Divisions Of The 6 Models Are Optional; Suitable For 4 Wires, 6 Wires And 8 Wires Stepper Motor..
【2】Suitable For A Wide Range Of Stepper Motors From Nema Size 17,23 And 24 (42 * 42Mm To 60 * 60Mm). It Can Be Used In Various Types Of Machines, Such As Xyz Tables, Labellers, Laser Cutters, Engraving Machines, Pick-Place Devices And So On..
Features
- 1 Package included: 1 x Stepper Motor Driver,1 x Stepper Motor, 1 x Wire.
- 2 Suitable for a wide range of stepper motors from NEMA size 17,23 and 24 (42 * 42mm to 60 * 60mm). It can be used in various types of machines, such as XYZ tables, labellers, laser cutters, engraving machines, pick-place devices and so on.
- 3 Motor driver: 9V-42V DC power supply, H-bridges bipolar constant phase current drive. The maximum 4.0A of the eight types of output current.
- 4 The largest 32 divisions of the 6 models are optional; Suitable for 4 wires, 6 wires and 8 wires stepper motor.
- 5 Protect form: Overheated protection, overcurrent protection, undervoltage protection, prevention of inversion.
- See more on Amazon...
Brand: Twotrees | Manufacturer: Twotrees
Weight: 1.00 Pounds
See On Amazon #14
RATTMMOTOR DM556S Stepper Motor Driver MAX 6A CNC Digital Stepper Motor Controller 200-51200 Micro-Step Resolution, 20-50VDC, Drive 4,6,8-Wire 2-Phase Stepper Motor for CNC Router Engraving Machine
Asin: B0C4H44Y7Y | Ean: 0754193411685 | UPC: 754193411685
【Automatic Parameter Upper Power Matching Motor Function】The Parameter Upper Power Automatic Setting Function Is Integrated Inside The Driver, Which Can Automatically Generate The Optimal Operating Parameters For Different Motors And Maximize The Performance Of The Motor..
【Features】Variable Current Control Greatly Reduces The Heating Of The Motor; The Static Current Is Automatically Halved; Photoelectric Isolation Differential Signal Input; Photoelectric Isolation, Alarm Output; Pulse Response Frequency Up To 500 Khz (Default 200 Khz); Protection Functions Such As Overvoltage, Undervoltage And Overcurrent; Rising / Falling Edge, Io Control Spontaneous Pulse, Single / Double Pulse, High Corresponding / High Speed And Low Vibration, And Self-Test Function..
【Application Field】Suitable For A Variety Of Small And Medium-Sized Automation Equipment And Instruments, Such As: Engraving Machine, Marking Machine, Cutting Machine, Engraving Machine, Plotter, Numerical Control Machine Tool, Automatic Assembly Equipment, Etc. In The User Expects Small Noise, High Speed Equipment In The Application Effect Is Particularly Good..
【Built-In High Segmentation】The User Can Set Any Subdivision Within 200~51200 And Any Current Value Within The Rated Current, Which Can Meet The Application Needs Of Most Occasions. Due To The Use Of Built-In Micro-Fine Technology, Even Under The Condition Of Low Segmentation, It Can Also Achieve The Effect Of High Segmentation, Low, Medium And High Speed Operation Is Very Stable, The Noise Is Very Small..
Features
- Product Introduction DM556S is a digital stepper motor driver, using the latest 32-bit DSP digital processing technology, the driver control algorithm using advanced variable current technology and advanced frequency conversion technology, the driver heat is small, the motor vibration is small, smooth operation.
- Built-in High Segmentation The user can set ANY SUBDIVISION within 200~51200 and any current value within the rated current, which can meet the application needs of most occasions. Due to the use of built-in micro-fine technology, even under the condition of low segmentation, it can also achieve the effect of high segmentation, low, medium and high speed operation is very stable, the noise is very small.
- Automatic Parameter Upper Power Matching Motor Function The parameter upper power automatic setting function is integrated inside the driver, which can automatically generate the optimal operating parameters for different motors and maximize the performance of the motor.
- Application Field Suitable for a variety of small and medium-sized automation equipment and instruments, such as: engraving machine, marking machine, cutting machine, engraving machine, plotter, numerical control machine tool, automatic assembly equipment, etc. In the user expects small noise, high speed equipment in the application effect is particularly good.
- Features Variable current control greatly reduces the heating of the motor; The static current is automatically halved; Photoelectric isolation differential signal input; Photoelectric isolation, alarm output; Pulse response frequency up to 500 KHz (default 200 KHz); Protection functions such as overvoltage, undervoltage and overcurrent; Rising / falling edge, IO control spontaneous pulse, single / double pulse, high corresponding / high speed and low vibration, and self-test function.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #15
FYSETC Prus MK3S+ Z Motor 2-Pack Nema 17 Stepper Motor 42-34 with Integrated 320mm/12.59inch T8 Lead Screw and Wire 250mm + 550mm, 1A 2Phase 1.8 Compatible with Prus I3 MK3S Z Axis 3D Printer Part
Asin: B0BN81M7T8
Specification: High Torque Nema 17 Z Motor, 340Mn.M, 42X34mm, Lead Screw 320Mm, 2 Phase, Integrated Wire Length 250Mm&550Mm..
Except For This Z Motor Kit, We Also Have Other Axes Motors For Prusa I3 3D Printer..
Lead Screw: Tr8x8, 2Mm Pitch, 4 Starts, 8Mm Lead, Length About 320Mm/12.59Inch..
Application: Great Drop-In Replacement Or Diy Z Axis Of Prus I3 Mk3s 3D Printer, No Firmware Modification Needed. Or Can Use On Cnc Milling, Small Robotics, Stage Lighting, Laser Engraving, Please Double Check The Specification Before Ordering..
Features
- Packing list: 2pcs nema 17 42-34mm stepper motor with integrated Tr8x8 lead screw 320mm/12.59inch& cable length 250mm/550mm.
- Application: great drop-in replacement or diy Z axis of Prus i3 Mk3s 3d printer, no firmware modification needed. or can use on CNC Milling, Small Robotics, Stage Lighting, Laser Engraving, please double check the specification before ordering.
- Specification: High torque nema 17 Z motor, 340mN.m, 42x34mm, lead screw 320mm, 2 phase, integrated wire length 250mm&550mm.
- Lead screw: Tr8x8, 2mm pitch, 4 starts, 8mm lead, length about 320mm/12.59inch.
- Except for this Z motor kit, we also have other axes motors for Prusa i3 3d printer.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #16
4 Pack TB6600 Stepper Motor Driver, Nema 17/23/34 Stepper Motor CNC Controller, 4A 9-42V Stepper Motor Controller for 42/57/86 Stepper Motor, Single Axes Two Phase Hybrid
Asin: B0C7CCQ2J8 | Model: STMD5052 | PartNumber: STMD5052 | Ean: 0768469609775 | UPC: 768469609775
8 Gear Output Current (0.5A/1.0A/1.5A/2.0A/2.5A/2.8A/3.0A/3.5A).
Widely Used In Various Small And Medium-Sized Automation Equipment And Hardware, Such As Engraving Machine, Marking Machine, Cutting Machine, Laser Phototypesetting, Plotter, Cnc Machine Tool, Crystal Grinding Machine, Automatic Assembly Equipment, Etc.
Best Application Is To 57 Stepper Motors And 42 Stepper Motors With A Torque Of 1.8N.M And Below.
Set 7 Kinds Of Subdivisions (1/2A/2B/4/8/16/32) Through 6-Bit Dip Switch.
Features
- TB6600 stepper motor driver suitable for 86/57/42 type two-phase hybrid stepping motor with phase current below 4.0A, Nema 17 23 34 Stepper Motor Driver (42x42mm to 60x60mm)
- Set 7 kinds of subdivisions (1/2A/2B/4/8/16/32) through 6-bit DIP switch
- 8 gear output current (0.5A/1.0A/1.5A/2.0A/2.5A/2.8A/3.0A/3.5A)
- Best application is to 57 stepper motors and 42 stepper motors with a torque of 1.8N.m and below
- Widely used in various small and medium-sized automation equipment and hardware, such as engraving machine, marking machine, cutting machine, laser phototypesetting, plotter, CNC machine tool, crystal grinding machine, automatic assembly equipment, etc
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #17
AITRIP 2PCS L298N Motor Drive Controller Board Stepper Motor Control Module Dual H-Bridge with 4 sets DC Motor and Smart Car Wheel Compatible with Arduino
Asin: B08JLYY77W | Ean: 0701715444034 | UPC: 701715444034
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
A Good Parts Kit For An Arduino And Raspberry Pi Based Rc Car Project..
Smart Car Wheels: The Wheels Are Made Of High-Strength Plastic And The Tires Are Made Of Durable Black Rubber ; Tt Motor: The Motor Is A Two-Axis Motor With A Reduction Ratio Of 1:48, Which Has Strong Anti-Interference Ability..
Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency.
Features
- Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability,low calorific value and strong anti-interference ability.
- Dual-channel H-bridge driver working mode creates higher working efficiency
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- Smart Car Wheels: The wheels are made of high-strength plastic and the tires are made of durable black rubber ; TT Motor: The motor is a two-axis motor with a reduction ratio of 1:48, which has strong anti-interference ability.
- A good parts kit for an Arduino and raspberry pi based RC car project.
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #18
ECCPP 25Pcs X27 168 Stepper Motor Instrument Gauge Cluster Speedometer Repair Kit
Asin: B078GB4MMD | Model: 803575-5211-2237121 | PartNumber: 803575-5211-2237121
Position:Speedometer,Gauge Cluster Light,Indicator Lamp.
What's You Get: 8Pcs X27 168 Stepper Motor.
If Your Vehical Easy To Gauges Dead,Chatter,Sticking,False/Jumpy/Inaccurate Readings,Pegged Out To The Left Or Right Of The Dial, Ratchet Up Or Down,Sticky Needle Movement And Erratic Gauge Movement,It Will Great Helpful For You..
Applications:Instrument Panel,Gauge Cluster,Speedometer.
Features
- Replacment for the older and faulty XC5-168, X15-168 ,X25-168
- Applications:Instrument panel,Gauge Cluster,Speedometer
- Position:Speedometer,Gauge Cluster light,Indicator lamp
- If your vehical easy to gauges dead,chatter,sticking,false/jumpy/inaccurate readings,pegged out to the left or right of the dial, ratchet up or down,sticky needle movement and erratic gauge movement,it will great helpful for you.
- What's you get: 8PCS X27 168 stepper motor
- See more on Amazon...
Brand: ECCPP | Manufacturer: ECCPP
Dimensions: 0.04 x 0.08 x 0.08 inches | Weight: 0.07 Pounds
See On Amazon #19
STEPPERONLINE Closed Loop Stepper Motor 1 Axis CNC KIT 3.0 Nm/424.92oz.in Nema 24 Stepper Motor & 0-8.0A 24-48VDC Closed Loop Stepper Driver CL57T V4.1
Asin: B0C692S7GH
1 X Cl57t: Nema 23/Nema 24 Closed Loop Stepper Motor Driver V4.1.
Suit For 3D Printer/Cnc Machine/Carving Machine/Dispenser/Automation Application.
100% Service Satisfactory. We Provided This Stepper Motor Kit With 30 Days Free Replacement Or Refund, 1 Year Warranty And Whole Life Customer Service From The Date Of Purchasing..
1 X Ce2-M2-20: 1.7M Motor And Encoder Extenstion Cables.
Please Note: The Thick Black Wire Can Be Used For Shielding, But It Is Not Required, So You Can Leave It Unconnected.
1 X Rs232 Debugging Cable.
1 X 24Hs34-5004D-E1000: 3.0Nm Closed Loop Stepper Motor.
Features
- Items in Kit
- 1 x 24HS34-5004D-E1000: 3.0Nm Closed loop stepper motor
- 1 x CL57T: Nema 23/Nema 24 Closed loop stepper motor driver V4.1
- 1 x RS232 Debugging Cable
- 1 x CE2-M2-20: 1.7m motor and encoder extenstion cables
- PLEASE NOTE: The thick black wire can be used for shielding, but it is not required, so you can leave it unconnected
- Suit for 3D printer/CNC machine/Carving Machine/Dispenser/Automation Application
- 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing.
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
See On Amazon #20
Teyleten Robot BTS7960 43A High Power H-Bridge DC Motor Driver Module DC Motor Controller Module for Arduino Smart Car 2pcs
Asin: B099N8XS5P | Model: C9- | PartNumber: C9- | Ean: 9339272399118
Double Bts7960 H-Bridge Driver Circuit, With A Strong Drive And Braking, Effectively Isolating The Microcontroller And Motor Driver.
5V Power Indicator On Board; Voltage Indication Of Motor Driver Output End; Can Solder Heat Sink; Just Need Four Lines From Mcu To Driver Module (Gnd. 5V. Pwm1. Pwm2).
High-Current 43A Features: Double Bts7960 Large Current (43 A) H Bridge Driver; 5V Isolate With Mcu, And Effectively Protect Mcu.
This Driver Uses Infineon Chips Bts7960 Composed Of High-Power Drive Full H-Bridge Driver Module With Thermal Over-Current Protection.
Features
- Since the pin header is easily broken, we have added foam to the pin header
- This driver uses Infineon chips BTS7960 composed of high-power drive full H-bridge driver module with thermal over-current protection
- Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver
- High-current 43A Features: Double BTS7960 large current (43 A) H bridge driver; 5V isolate with MCU, and effectively protect MCU
- 5V power indicator on board; voltage indication of motor driver output end; can solder heat sink; Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2)
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon
Looking For Something Else?
Search