BCZAMD 3D Printer Heating Plate Adhesive Silicone Heated Mat 120V 750W with NTC 100K Thermistor No Hole for Crealit Ender 3 Max 3D Printer Parts 300 X 300mm (Approx. 12" X 12")
Asin: B07ZFPKHN5 | Model: AiUS Silicone Rubber Heater 300 | PartNumber: AiUS Silicone Rubber Heater 300 | Ean: 0738678971932 | UPC: 738678971932
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Suggest Working Temperature: -62～200℃ ( Note: The Silicone Mat's Temperature Will Heats Up Quickly, Please Take Anti-Scalding Measures ! ).X300mm/ 12 X 12 Inch, Power: Ac 120V 750W.Surface Mount Ntc 100K Thermistor, The Backing Comes With Strong Adhesive.Improted Rubber Silicone, Excellent Heat Source, Evener Heating Across The Whole Surface..
Please Note You'll Need Soldering Gear And Basic Electrical Skills To Do This Upgrade, As Well As A Solid-State Relay (Required) And An Insulation Pad..
Please Size: 300X300mm/ 12 X 12 Inch, Power: Ac 120V 750W.Surface Mount Ntc 100K Thermistor, The Backing Comes With Strong Adhesive.Improted Rubber Silicone, Excellent Heat Source, Evener Heating Across The Whole Surface.Note You'll Need Soldering Gear And Basic Electrical Skills To Do This Upgrade, As Well As A Solid-State Relay (Required) And An Insulation Pad..
The Heating Pad Is Durable And Effective In Heating. When You Feel The Print Bed Is Not Hot Enough, Suggest You To Check The Mos Module, Ssra, The Motherboard Interface. For Example The Issues Maybe Happen For Ssr,Disconnect The Ssr Cable Directly Connect It To The Board, About 3-4 Seconds, Disconnect It Immediately, Touch The Mat, If Feel A Little Hot, Then It Is Still Good. You Need To Replace A New Ssr Relay Then Test It Again.If You Can't Troubleshoot, Contact Us Directly..
Features
- Don't drill the holes by youslfe, heater mat has no holes for the bed screws, which suitable for universal printer without perforated hot bed. Not applicable to some models, such as the Rattlesnake sidewinde X1 and CR10 . Please make sure it matches your printer when you buy. In addition, we will launch a heating pad with perforations, so please look forward to it.
- The heating pad is durable and effective in heating. When you feel the print bed is not hot enough, suggest you to check the mos module, SSRA, the motherboard interface. For example the issues maybe happen for SSR,disconnect the SSR cable directly connect it to the board, about 3-4 seconds, disconnect it immediately, touch the mat, if feel a little hot, then it is still good. You need to replace a new SSR relay then test it again.If you can't troubleshoot, contact us directly.
- Suggest working temperature: -62 200 ( Note: the silicone mat's temperature will heats up quickly, please take anti-scalding measures ! ).X300mm/ 12 X 12 inch, Power: AC 120V 750W.Surface mount NTC 100K thermistor, the backing comes with strong Adhesive.Improted Rubber Silicone, excellent heat source, evener heating across the whole surface.
- Please Size: 300X300mm/ 12 X 12 inch, Power: AC 120V 750W.Surface mount NTC 100K thermistor, the backing comes with strong Adhesive.Improted Rubber Silicone, excellent heat source, evener heating across the whole surface.note you'll need soldering gear and basic electrical skills to do this upgrade, as well as a solid-state relay (required) and an insulation pad.
- Please note you'll need soldering gear and basic electrical skills to do this upgrade, as well as a solid-state relay (required) and an insulation pad.
- See more on Amazon...
Brand: BCZAMD | Manufacturer: Aimengda
See On Amazon Similar To BCZAMD 3D Printer Heating Plate
#1
Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 235X235mm (1)
Asin: B07X3WBNPX
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Simple Installation & Universal: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
All New Functionality: Introducing The First Ever Removable, Magnetically Secured, Build Surface For Hassle Free Model Removal.It Is Recommended To Heat The Hot Bed For 2-3 Minutes Before Removing The Model With The Removal Tools..
Features
- ATTENTION BEFORE USE Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.08 x 9.25 x 9.25 inches | Weight: 0.55 pounds
See On Amazon #2
Ender 3 V3 KE PEI Spring Steel 235x235mm, Texture PEI Sheet Magnetic Flexible Heated Bed, Ender 3 V3 SE Build Plate for Creality K1C/K1/Ender 3 V3/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo
Asin: B0CRDS6PRR
Strong Magnetic Force - The Pei Sheet 235X235mm Is Selection Of Strong Magnetic Paste, High Temperature Can Still Maintain A High Degree Of Magnetism, To Ensure The Stability Of Printing. The Ender 3 V3 Se Build Plateis Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print, It Can Print With Most Filaments, Such As Pla / Abs / Asa / Petg / Tpu / Nylon / Pa / Pc..
Wide Compatibility - The Pei Sheet 235X235mm And Peo Smooth Surface Is Perfect For Elegoo Neptune 3 Pro/Neptune 4/Neptune 4 Pro/Creality K1c/K1/Ender 3 V3/Ender 3 V3 Se/Ender 3 V3 Ke/Cr-10 Se/Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/Cr 20/ Cr 20 Pro/ Ender 5/ Ender 5 Pro/ 3D Printer..
Positioning Holes Design - Double Handles + Positioning Holes Design, Precise Positioning, Easy And Simple Installation. The Pei Spring Steel 235X235mm Makes The Prints Easy To Adhere To The Printing Surface, And It Is Easy To Remove The Prints And Flex Slightly To Pop Your Print Right Off..
Excellent Flatness - The Ender 3 V3 Ke Pei Magnetic Heated Bed Provides The High Flatness Spring Steel, Ensuring The Model Can Be Firmly Attached To The Surface Of The Print Platform, Can Be Repeated Bending Without Deformation, Easy To Take The Model..
Features
- Premium Quality PEI Coating - The Creality K1 PEI Spring Steel 235x235mm is made of High temperature resistant PEI coating on the surface, high abrasion resistance and high strength frosted texture, the PEI build surface is not easy to scratch.
- Excellent Flatness - The Ender 3 V3 KE PEI Magnetic Heated Bed provides the high flatness spring steel, ensuring the model can be firmly attached to the surface of the print platform, can be repeated bending without deformation, easy to take the model.
- Strong Magnetic Force - The PEI Sheet 235x235mm is selection of strong magnetic paste, high temperature can still maintain a high degree of magnetism, to ensure the stability of printing. The ender 3 V3 SE Build Plateis excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print, it can print with most filaments, such as PLA / ABS / ASA / PETG / TPU / Nylon / PA / PC.
- Positioning Holes Design - Double handles + positioning holes design, precise positioning, easy and simple installation. The PEI spring steel 235x235mm makes the prints easy to adhere to the printing surface, and it is easy to remove the prints and flex slightly to pop your print right off.
- Wide Compatibility - The PEI sheet 235x235mm and PEO smooth surface is perfect for ELEGOO Neptune 3 Pro/Neptune 4/Neptune 4 PRO/Creality K1C/K1/Ender 3 V3/Ender 3 V3 SE/Ender 3 V3 KE/CR-10 SE/Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro/ 3D Printer.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #3
Creality Official PEI Plate with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro and All 235 * 235mm Size 3D Printer
Asin: B0BRQ7LRNC | Model: CR-PEI0105 | PartNumber: CR-PEI0105 | Ean: 0783970029119 | UPC: 783970029119
【Easy Model Removal】When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print.This Surface Is Easily Removed And Flexible. Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
【Wide Application】The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). Please Re-Level It To Improve The Printing Effect. It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 Pro,Ender 3 Neo,Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers.Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
【Simple Installation】The Ender 3 V2 Pei Sheet Is Combined With 2 Parts, A Flexible Steel Platform Textured Pei Surface On One Side, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top.Spring Stainless Steel, Pei Powder Sprayed On The Surface, Golden Yellow On The Back. Flexible, Removable, And Can Stick To Magnetics Very Well. High Strength And Heat Resistance..
【Excellent Adhesion】Easy To Adhere To The Printing Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off. Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well..
Features
- Creality Official Creality Official Golden PEI Plate Kit,We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120 C Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- Excellent Adhesion Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well.
- Easy Model Removal When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- Simple Installation The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance.
- Wide Application The size of ender 3 PEI is 235*235mm 9.25*9.25inch). please re-level it to improve the printing effect. it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- See more on Amazon...
First Available: 05/20/2023
Brand: UNIDO | Manufacturer: Unido
Weight: 1.39 Pounds
See On Amazon #4
Creality Ender 3 Build Plate Ultra Flexible Removable Magnetic Build Surface Hot Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1, 235X235MM
Asin: B084YSZFXL | Model: MBE3 | PartNumber: MBE3 | Ean: 8414858708049
Easy To Install: Magnetic Bed Comes With Upper Matte Magnetic Build Plate And Lower Magnetic Adhesive Build Plate. Post The Lower Adhesive Plate On Printing Platform, Make The Upper Magnetic One Match Well With It, Then You Can Start Print..
Note: If The Two Parts Of The Magnetic Bed Fail To Adsorb, Please Rotate It 90 Degrees And Try Again. Do Not Use Acetone To Wipe Off Thin Layers Left From Prints. Please Feel Free To Contact Us If You Have Any Problem, We Will Try Our Best To Help You..
Universal: With 235Mm X 235Mm Size, This 3D Printer Kit Is Suitable For All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds. Applicable Materials: Pla, Tpu, Nylon Etc, Not For Pla +, Not Recommended For Printing Abs Filaments..
Excellent Performance: This Magnetic Bed Has Strong Flexibility And Heat Resistance Up To 70 ℃ Without Degauss. Wear-Resistant, Scratch-Resistant, Stain-Resistant, Hand-Sweat Resistant, Can Be Used Repeatedly..
Features
- Super Convenient: This magnetic sheet has great adhesion, prints can be sticked on the surface firmly. After printing, take off the upper magnetic build plate from the lower one, bend the flexible plate carefully, the prints can be removed easily.
- Excellent Performance: This magnetic bed has strong flexibility and heat resistance up to 70 without degauss. Wear-resistant, scratch-resistant, stain-resistant, hand-sweat resistant, can be used repeatedly.
- Easy to Install: Magnetic bed comes with upper matte magnetic build plate and lower magnetic adhesive build plate. Post the lower adhesive plate on printing platform, make the upper magnetic one match well with it, then you can start print.
- Universal: With 235mm x 235mm size, this 3d printer kit is suitable for all FDM printer models, and all heated and non-heated 3D printer beds. Applicable materials: PLA, TPU, nylon etc, not for PLA +, not recommended for printing ABS filaments.
- Note: If the two parts of the magnetic bed fail to adsorb, please rotate it 90 degrees and try again. Do NOT use acetone to wipe off thin layers left from prints. Please feel free to contact us if you have any problem, we will try our best to help you.
- See more on Amazon...
Brand: Mefine | Manufacturer: Mefine
See On Amazon #5
Official Creality Ender 3 V3 SE Build Plate, 235x235mm PEI Sheet Textured Surface Flexible Removable Spring Steel Print Platform for Ender 3S1/3S1 Pro/3V2 Neo/3V3/3V3 KE K1/K1C(No Magnetic Base)
Asin: B0CJTXJT24
【Great Adhesion More Stable】A Distinctive Frosted Feel Given By The Special Rough Frosted Surface Of The Plate. Higher Adhesion Of Models, Not Easy To Warp While Firmly Locks Creativity During The Printing Process..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Wide Application】235*235Mm Spring Steel Build Plate 3D Printer Bed Compatible With Ender 3/ Ender 3 V2/ Ender 5/ Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ender 3 V3 Ke/3V3 Cr 10 Se/K1/K1c And Other Same-Sized Beds. After Replacing The Printing Bed, Please Level The Bed Again For Better Printing Results..
【Easy To Remove Printed Models】Easy To Remove The Prints Without Tools, Just Take Out The Spring Steel Plate And Slightly Flex It Repeatedly To Pop Your Prints Right Off. No Need To Scratch, Pry And Damage Your Prints!.
Features
- Quality Assurance 100% Official Creality Ender 3 V3 SE build plate, original 235*235mm spring steel removable flexible textured heated bed platform. The spring steel plate can withstand the numerous heat cycles that a 3D printer bed goes through from print to print.
- Easy to Remove Printed Models Easy to remove the prints without tools, just take out the spring steel plate and slightly flex it repeatedly to pop your prints right off. No need to scratch, pry and damage your prints!
- Great Adhesion More Stable A distinctive frosted feel given by the special rough frosted surface of the plate. Higher adhesion of models, not easy to warp while firmly locks creativity during the printing process.
- Wide Application 235*235mm spring steel build plate 3d printer bed compatible with Ender 3/ Ender 3 v2/ Ender 5/ Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/Ender 3 V3 KE/3V3 CR 10 SE/K1/K1C and other same-sized beds. After replacing the printing bed, please level the bed again for better printing results.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 0.07 x 9.29 x 9.29 Inches | Weight: 0.66 pounds
See On Amazon #6
Creality Official Ender 3 S1 Pro Original Build Plate 235x235mm Magnetic Bed Plate Texture Removable PEI Sheet for Ender 3 V3 SE/Ender 3 V3 KE/Ender 3 S1/Ender 3/Ender 5 S1/Ender 5 Pro, K1, CR-10 SE
Asin: B0C4P1SP6F
【Wide Compatibility】- This Magnetic Build Plate Is Applicable To Most Materials Such As Pla, Abs, Asa, Petg, Tpu, Pc, Pa, Etc. It Is Compatible With Creality K1, Ender 3 V3 Se, Ender 3 V3 Ke, Ender 3 S1, Ender 3 S1 Pro, Ender 3, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 S1, Cr-10 Se And So On..
【Professional Support】- To Ensure Your Pleasant Shopping Experience, Creality Has A Professional Customer Service Team To Solve Your Problems. If You Have Any Problems, Please Do Not Hesitate To Contact Us. We Will Provide Friendly And Fast Customer Service To Solve Your Problem Within 24 Hours..
【Easy Model Removal】- Without Using Other Tools, You Can Easy To Remove The Printed Model By Just Bending The Pei Steel Plate Multiple Times After Printing. The Pei Sheet Has Excellent Elasticity And It Is Not Deformed After Repeated Bending..
【Precise Positioning】- Dual Handles And Positioning Hole Design Make The 3D Printer Build Plate Easier To Install And Use. Furthermore, This Ender 3 S1 Build Plate Has A Strong Magnetic Force, And It Is Not Easy To Dislocate After Installation. Strong Magnetic Stickers Help It Maintain High Adhesion At High Temperatures, Which Ensures Better Print Stability..
Features
- Premium PEI Materials - With heat and wear-resistant, frosted PEI powder coating, the PEI build plate surface is not easy to get scratched or damaged. This Ender 3 S1 Pro bed plate has high adhesion to prevent the model from warping while printing, whether at high or low temperatures.
- Precise Positioning - Dual handles and positioning hole design make the 3D printer build plate easier to install and use. Furthermore, this Ender 3 S1 build plate has a strong magnetic force, and it is not easy to dislocate after installation. Strong magnetic stickers help it maintain high adhesion at high temperatures, which ensures better print stability.
- Wide Compatibility - This magnetic build plate is applicable to most materials such as PLA, ABS, ASA, PETG, TPU, PC, PA, etc. It is compatible with Creality K1, Ender 3 V3 SE, Ender 3 V3 KE, Ender 3 S1, Ender 3 S1 Pro, Ender 3, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 S1, CR-10 SE and so on.
- Easy Model Removal - Without using other tools, You can easy to remove the printed model by just bending the PEI steel plate multiple times after printing. The PEI sheet has excellent elasticity and it is not deformed after repeated bending.
- Professional Support - To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems. If you have any problems, please do not hesitate to contact us. We will provide friendly and fast customer service to solve your problem within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #7
Creality Ender 3 S1 Pro Build Plate, Original PEI Print Platform Kit Magnetic Flexible Spring Steel Texture Surface for Ender 3 V3/Ender 3 V3 SE/Ender 3 V3 KE/Ender 3 S1/3 Neo/3V2 Neo K1/K1C 235x235mm
Asin: B0BBMKLG86 | Model: 3d-s1pro-pei | PartNumber: 3d-s1pro-pei
【Great Adhesion】Print Molds Onto Pei Build Plate Frosted Texture Surface Directly. No Tape, No More Glue, Release Your Printing Anxiety..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Easy Take Models】Easy To Remove The Prints Just Take Out The Build Plate Surface And Slightly Flex It Repeatedly To Pop Your Prints Right Off. No Need To Scratch, Pry And Damage Your Prints!.
【Wide Application】Compatible With Pla/ Petg/ Peek/ Abs And Any Other Filaments. 235*235Mm Spring Steel Sheet 3D Printer Bed Works Well With Ender 3/ Ender 3 S1/ Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro/Cp-01/Cr-20/Cr20 Pro/Ender 3 S1 Pro/Ender 5/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke K1/K1c And Other Same-Sized Beds..
Features
- Quality Assurance Made of high-quality spring steel, the flexible Steel spring Sheet won't kink or warp when flexing. The design of the positioning hole makes the PEI Sheet installation more convenient.
- Wide Application Compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 235*235mm spring steel sheet 3d printer bed works well with Ender 3/ Ender 3 S1/ Ender 3 v2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro/CP-01/CR-20/CR20 Pro/Ender 3 S1 Pro/Ender 5/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE K1/K1C and other same-sized beds.
- Great Adhesion Print molds onto PEI build plate frosted texture surface directly. No tape, no more glue, release your printing anxiety.
- Easy Take Models Easy to remove the prints just take out the build plate surface and slightly flex it repeatedly to pop your prints right off. No need to scratch, pry and damage your prints!
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #8
Official Creality Ender 3 V3 SE Build Plate 235x235 Original Textured PEI Sheet Magnetic Flexible Spring Steel Build Plate for Ender 3/Ender 3 V2/Ender 3 V3 KE/Ender 3 V3 SE/K1/K1C
Asin: B0CTQSMSJZ
High Quality Spring Steel - Crafted From High-Precision Spring Steel, Our Build Plate Ensures Exceptional Flatness, Guaranteeing Uniform Layer Adhesion During Printing. Its Elasticity Eases Prints Removal By Gently Bending. The Durable Plate Withstands Heating, Cooling Cycles, And Bending For Extended Use. Excellent Thermal Conductivity Ensures Even Heat Distribution, Preventing Object Contraction Or Deformation, Significantly Enhancing 3D Printing Quality, Convenience, And Durability..
In Order To Save Your Costs And Minimize Unnecessary Waste, This Product Only Includes An Ender 3 V3 Se Pei Sheet Without Magnetic Sheet. Therefore, It Is Suitable For Users Whose Original Magnetic Sticker Is Still Functional. If The Original Magnetic Sticker Is Damaged, Please Consider Purchasing The Build Plate Kit That Includes Magnetic Sheet..
Efficient Magnetic Board Design - The Printing Board Features A Magnetic Suction Design, Greatly Simplifying Base Replacement For Enhanced Convenience. With Dual Handles For Improved Grip, It Facilitates Easy And Secure Disassembly And Installation. Cleverly Positioned Holes Ensure Swift, Accurate Alignment, Preventing Model Displacement During Printing. Overall, The Design Prioritizes Swift Installation And Convenient Disassembly, Meeting Users' Demands For Efficient 3D Printing..
The Pei Coating Is Characterized By Its Wear Resistance And High-Temperature Durability. It Is Not Easily Scratched And Is Widely Applicable To Various Printing Materials. It Provides Reliable Adhesion To The Model Under Both High And Low Temperatures, Ensuring Stable 3D Printing Without Warping And Significantly Improving The Success Rate Of Prints..
Features
- Official Original Build Plate - Offical Creality Ender 3 V3 SE build plate, with dimensions of 235x235mm and a printing area of 220x220mm. Additionally, it is compatible with other FDM printers of the same size, such as Ender 3, Ender 3S, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Pro, Ender 3 Neo, Ender 3 V2, Ender 3 V2 Neo, Ender 3 V3, Ender 3 V3 KE, Ender 3 V3 SE, Ender 5, Ender 5S, Ender 5 S1, Ender 5 Pro, K1, K1C, KR, CR 10 SE, CR20, CP 01, etc.
- The PEI coating is characterized by its wear resistance and high-temperature durability. It is not easily scratched and is widely applicable to various printing materials. It provides reliable adhesion to the model under both high and low temperatures, ensuring stable 3D printing without warping and significantly improving the success rate of prints.
- High Quality Spring Steel - Crafted from high-precision spring steel, our build plate ensures exceptional flatness, guaranteeing uniform layer adhesion during printing. Its elasticity eases prints removal by gently bending. The durable plate withstands heating, cooling cycles, and bending for extended use. Excellent thermal conductivity ensures even heat distribution, preventing object contraction or deformation, significantly enhancing 3D printing quality, convenience, and durability.
- Efficient Magnetic Board Design - The printing board features a magnetic suction design, greatly simplifying base replacement for enhanced convenience. With dual handles for improved grip, it facilitates easy and secure disassembly and installation. Cleverly positioned holes ensure swift, accurate alignment, preventing model displacement during printing. Overall, the design prioritizes swift installation and convenient disassembly, meeting users' demands for efficient 3D printing.
- In order to save your costs and minimize unnecessary waste, this product only includes an Ender 3 V3 SE PEI sheet without magnetic sheet. Therefore, it is suitable for users whose original magnetic sticker is still functional. If the original magnetic sticker is damaged, please consider purchasing the build plate kit that includes magnetic sheet.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #9
PEI Sheet Double-Sided Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 V2-Pro-S1/Ender 5-Pro/Ender 3 V3 SE-KE 3D Printer, Ender 3/5 Series Bed Upgraded 235mm x 235mm
Asin: B0C4QBC1ZR | Model: PEI-0509 | PartNumber: PEI-0509 | Ean: 0795847035284 | UPC: 795847035284
Excellent Adhesion: Our Pei Sheet Provides Excellent Adhesion For Your Prints, Allowing Them To Stick Securely To The Printing Surface While Still Being Easy To Remove. You Can Print Directly Onto Each Side Of The Double-Sided Sheet Without Glue Or Any Other Adhesives..
Simple Installation: This 3D Printer Bed Is Easy To Install. Simply Stick The Magnetic Bottom Sheet Onto Your Chosen Build Plate, And Then Place The Steel Platform With Pei Surface On Top. Easily Replace An Ender 3 Glass Bed, Or Any Other Type Of Platform. The Pei Sheet Is Flexible, Removable And Sticks To Magnetics Very Well..
Great Removal: When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Easy To Remove And Flexible, Allowing Prints To Come Off The Surface Easily When It Reaches Room Temperature. After The Model Printing Is Completed, Just Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface, And Watch The Model Fall Right Into Your Hands..
More Affordable And Practical: This Build Plate Is Made With 75% Thicker Pei And 25% Thicker Spring Steel Than Similar Products On The Market, Providing A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. The Magnet Can Sustain High Temperatures Of Up To 120°C, Making It Wear-Resistant And Scratch-Resistant. Besides, It's Really Easy To Clean With A Protective Film On The Surface Of The Composite Coating, Which Is Anti-Scratch And Dustproof..
Features
- Wide Application: This PEI sheet is 235mm x 235mm, applicable to Ender3, Ender3 Pro, Ender3 V2, Ender3 S1, Ender3 S1 Pro, Ender3 Neo, Ender 3 V2 Neo, Ender5, Ender5 Pro and similarly sized FDM 3D printers. The PEI sheet is also compatible with various build plate types, including the Ender 3 build plate, Ender 3 bed plate, Ender 3 magnetic build plate, PEI build plate, Ender 3 glass build plate, and the Wham Bam flexible build plate, available for printing with PLA, PETG, PEEK, ABS or any other filaments.
- More Affordable and Practical: This build plate is made with 75% thicker PEI and 25% thicker spring steel than similar products on the market, providing a more durable plate that can handle the tough conditions of 24/7 printing. The magnet can sustain high temperatures of up to 120 C, making it wear-resistant and scratch-resistant. Besides, it's really easy to clean with a protective film on the surface of the composite coating, which is anti-scratch and dustproof.
- Excellent Adhesion: Our PEI sheet provides excellent adhesion for your prints, allowing them to stick securely to the printing surface while still being easy to remove. You can print directly onto each side of the double-sided sheet without glue or any other adhesives.
- Great Removal: When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is easy to remove and flexible, allowing prints to come off the surface easily when it reaches room temperature. After the model printing is completed, just remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- Simple Installation: This 3d printer bed is easy to install. Simply stick the magnetic bottom sheet onto your chosen build plate, and then place the steel platform with PEI surface on top. Easily replace an Ender 3 glass bed, or any other type of platform. The PEI sheet is flexible, removable and sticks to magnetics very well.
- See more on Amazon...
First Available: 05/20/2023
Brand: UNIDO | Manufacturer: Unido
See On Amazon #10
YOOPAI Double-Sided PEI Sheet and Flexible Magnetic Build Plate Kit, 235x235mm 3D Printer Bed Platform for Creality K1/Ender 5 S1/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1 Pro/Ender 3 Neo, Gold
Asin: B0C2HNZWTG | Model: DB-PEI-Black | PartNumber: DB-PEI-Black | Ean: 0850055848238 | UPC: 850055848238
Simple Set-Up: Our Pei Sheet Has Two Parts, A Flexible Steel Platform And A Magnetic Bottom Sheet With Adhesive On The Back. Simply Attach The Magnetic Base Plate To The Printer's Hot Bed And Adsorb The Pei Bottom To Start Printing Immediately..
Wide Application: The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). After Installing The Print Bed, Please Re-Level It To Improve The Printing Effect. It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 Pro,Ender 3 Neo, Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers..
Great Removal: Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Flexible And Easily Removed. When The Temperature Of The Heated Bed Reaches Room Temperature, Prints Come Off The Surface Easily. If The Print Is Still Stuck, Just Remove The Upper Magnetic Surface From The Lower One, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Reliable And Cost-Effective: This 3D Printer Bed Can Handle The Tough Conditions Of 24/7 Printing With The Ultra-High Temperature Of Up To 120°C, Making It Perfect For Materials Like Pla, Petg, Abs, Tpu, Asa, Nylon, And Pc. Both Sides Of The Pei Sheet Can Be Printed, Pay Once And Get Twice The Usage Time..
Features
- Excellent Adhesion: Each Yoopai PEI sheet has two sides, both are textured. You can print directly on each side of the PEI sheet without using any glue or other tools to help the model to stick onto the sheet. Both sides have strong adhesion to various filaments, just choose either side for printing according to your needs.
- Reliable and Cost-effective: This 3D printer bed can handle the tough conditions of 24/7 printing with the ultra-high temperature of up to 120 C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and PC. Both sides of the PEI sheet can be printed, pay once and get twice the usage time.
- Simple Set-up: Our PEI Sheet has two parts, a flexible steel platform and a magnetic bottom sheet with adhesive on the back. Simply attach the magnetic base plate to the printer's hot bed and adsorb the PEI bottom to start printing immediately.
- Great Removal: Withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is flexible and easily removed. When the temperature of the heated bed reaches room temperature, prints come off the surface easily. If the print is still stuck, just remove the upper magnetic surface from the lower one, bend the flexible surface and watch the model fall right into your hands.
- Wide Application: The size of Ender 3 PEI is 235*235mm 9.25*9.25inch). After installing the print bed, please re-level it to improve the printing effect. It is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 pro,Ender 3 neo, Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.
- See more on Amazon...
First Available: 02/10/2023
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 9.25 x 0.16 x 9.25 Inches
Warranty: 1 year garantie
See On Amazon #11
DOBSTFY 3D Printing Build Surface,with Premium Adhesive 3D Printer Heat Bed Platform Sticker Sheet,for Ender 3/Ender 3 Pro/Ender 3 V2 Neo/Ender 3 V3 KE/Ender 3 V3 SE/4Pack 8.7x8.7inch(220mmx220mm)
Asin: B08SQ95V9Q | Model: 4PK 220 | PartNumber: 4PK 220
【Easy To Install And Remove】Thick 1Mm Building Plates Will Not Warp Or Bend Under Heat. It Is Used On Top Of Your Heated Print Bed And Provides Excellent Results. Simply Remove The 3M Adhesive Paper On Back Side Then Stick It On Your Heat Bed. Or Fix It Just With Clip Around The Edges. Print Directly On To The Building Surface Without The Need For Additional Adhesives, Tapes, Or Slurry..
【Satisfaction Guaranteed】We're So Confident That You'll Love These Premium Print Surfaces, That We Offer A 90 Day Money Back Guarantee!.
【Fully Compatibly】 This 3D Printer Heatbed Platform Sheet Allows For Multiple Uses With Either The Same Or Different Filament Material. Compatible With Abs, Pla, Hips, Pet+, Brick, Wood, And Flexible (Tpe) Filaments. Reuse For Multiple Prints, Just Wipe Down With Isopropyl Alcohol Between Prints For Best Results..
【High Quality Material】High Strength And Heat Resistance (Up To 240°C) Allows The 3D Printer Surface To Perform Consistently In High Temperature Environments. The Durability Is Similar Pei Sheet But The Price Is Much Affordable Than Pei. This Hot Bed Sheet Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. And This 3D Build Plate Is Also Inherently Flame Resistant And Low In Smoke Production..
Features
- PACK of 4 The 220mmx220mm (8.7" x 8.7") 3D Printer build plate is fully matches heated bed for large format printers such as the Creality MK2, MK2A, MK3, Anet A8, Anet A6 with large build areas. also fits Anet A8, Cocoon 3D Printer Touch, Wanhao Duplicator 6 and Duplicator i3 and i3 Plus, TronXY X2, TronXY P802M, Ultimaker 1, MonoPrice Maker Select Plus and Ultimate and V2, Robo R2. And you can also cut to any size as 220x210mm, 6.5"x6.5" and more.u want
- High Quality Material High strength and heat resistance (up to 240 C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production.
- Easy to Install and Remove Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry.
- Fully Compatibly This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments. Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results.
- SATISFACTION GUARANTEED We're so confident that you'll love these premium print surfaces, that we offer a 90 day money back guarantee!
- See more on Amazon...
Brand: DOBSTFY | Manufacturer: DOBSTFY
See On Amazon #12
Creality Ender 3 Build Plate Kit Dual-Sided Printing Platform Board Glossy PEO + Matte PEI Plate Build Surface for Ender 3 V3 SE/Ender 3/Ender 3Pro/Ender 3 V2/Ender 3 S1/S1 Pro 3D Printer 235x235mm
Asin: B0CQR4WX78 | Model: PEO+PEI Build Plate | PartNumber: PEO+PEI Build Plate
【Compatible 3D Printers】The Double-Sided Smooth Peo+ Matte Pei Print Bed Suitable For 3D Printers With 235×235Mm Platform Size, Such As Suitable For Creality Ender 3 V3 Se/Ender 3 V3 Ke/Ender 3/Ender 3Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/K1/Cr 10 Se, Please Confirm Your 3D Printer Platform Size Before Ordering..
【High Flatness & Easy Demolding】High-Flatness Spring Steel Sheet With Excellent Elasticity, Remains Undistorted After Repeated Bending, Wear-Resistant And Durable, Facilitating Demolding..
【Quick Installation & Precise Positioning】Dual-Sided Printing Platform Board Kit – Glossy Peo + Matte Pei, With The Unique Dual-Handle + Dual-Locating Hole Design For Accurate Installation..
【High Adhesion & Stable Molding】Ender 3 V3 Se Pei Build Plate Thin Spring Steel Sheet With Surface Adhesion To High-Adhesion Materials, To Reduce Inertia During Platform Movement For Smoother 3D Printer Operation..
【Compatible Filaments】Ender 3 Build Plate Peo Sticker Surface Can Withstand Temperatures Of Approximately 80℃; Recommended For Printing Pla_Petg_Tpu. Matte Pei Surface Suitable For Printing Nearly All Mainstream Filaments: Pla, Petg, Abs, Tpu, Asa, Pet, Pa, Pc, Etc. Dual-Sided Platform Combining The Strengths Of Both, Allowing For Seamless Switching..
Features
- Upgraded Double Sided Printing Platform Board Double-sided PEO+PEI spring steel plate, one side is smooth diamond type print surface-upgraded glossy PEO film. The other side is coated PEI frosted surface, presenting the frosted sticker surface a distinctive frosted touch, high-adhesion black matte PEI, to prevent model warpingand prints without warping.
- Compatible Filaments Ender 3 build plate PEO sticker surface can withstand temperatures of approximately 80 ; recommended for printing PLA_PETG_TPU. Matte PEI surface suitable for printing nearly all mainstream filaments: PLA, PETG, ABS, TPU, ASA, PET, PA, PC, etc. Dual-sided platform combining the strengths of both, allowing for seamless switching.
- Compatible 3D Printers The double-sided smooth PEO+ matte PEI print bed suitable for 3D printers with 235 235mm platform size, such as suitable for Creality Ender 3 V3 SE/Ender 3 V3 KE/Ender 3/Ender 3Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/K1/CR 10 SE, Please confirm your 3D printer platform size before ordering.
- High Adhesion & Stable Molding Ender 3 v3 se PEI build plate thin spring steel sheet with surface adhesion to high-adhesion materials, to reduce inertia during platform movement for smoother 3D printer operation.
- High Flatness & Easy Demolding High-flatness spring steel sheet with excellent elasticity, remains undistorted after repeated bending, wear-resistant and durable, facilitating demolding.
- Quick installation & Precise positioning Dual-Sided Printing Platform Board Kit Glossy PEO + Matte PEI, with the Unique dual-handle + dual-locating hole design for accurate installation.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 0.31 x 10.43 x 9.84 Inches | Weight: 1.21 pounds
See On Amazon #13
Sovol 3D Upgraded Platform 2 Pack, Resin Magnetic Flexible Steel Plate Flex Bed Fits for ANYCUBIC Photon/Photon S/Photon Mono/Photon Mono SE/Qidi Shadow 5.5S SLA 3D Printer 135x80mm
Asin: B08LYP2VTT
The Magnetic Base Offers Powerful Magnetics, Ensure Perfect Fit With Steel Plate. The Two Easy Lift Tabs(Handles) Make It Easier To Remove The Steel Plate From The Magnetic Base..
The Spare Steel Plate Can Achieve Continuous Printing, Restart Printing Before You Start Cleaning The First, Save Your Time..
!!! Please Clean Up Your Build Plate With Alcohol To Make Sure There Is No Any Resin Or Dust Left On The Surface. The Build Plate Must Be Clean And Dry. And You Need To Stick And Compact The Magnetic Base On Build Plate To Make Sure No Any Bubbles. Otherwise The Magnetic Base Would Peel Off. Please Wait For 72 Hours After Installation And Before Printing. Tips: You Can Use Hair Dryer Blow The Magnetic Base Evenly With Hot Wind For 5-10 Mins After Installation To Increase The Adhesion..
‼Please Adjust The Z Limit Switch After Installation. It Should Be 2.7Mm Higher. That Means The Printing Height Will Be Reduced About 2.7Mm. You Can Print A Spacer To Compensate The Difference. If You Do Not Receive Instrucstions Coming With The Product, Please Refer To The Last 2 Pictures We Listed On The Product Webpage Which Contains Instructions In Details. Any Other Questions Or Issues About The Product Please Feel Free To Contact Us..
Features
- Spring steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print.
- Please adjust the z limit switch after installation. It should be 2.7mm higher. That means the printing height will be reduced about 2.7mm. You can print a spacer to compensate the difference. If you do not receive instrucstions coming with the product, please refer to the last 2 pictures we listed on the product webpage which contains instructions in details. Any other questions or issues about the product please feel free to contact us.
- The magnetic base offers powerful magnetics, ensure perfect fit with steel plate. The two easy lift tabs(handles) make it easier to remove the steel plate from the magnetic base.
- !!! Please clean up your build plate with alcohol to make sure there is no any resin or dust left on the surface. The build plate must be clean and dry. And you need to stick and compact the magnetic base on build plate to make sure no any bubbles. Otherwise the magnetic base would peel off. Please wait for 72 hours after installation and before printing. Tips: You can use hair dryer blow the magnetic base evenly with hot wind for 5-10 mins after installation to increase the adhesion.
- The spare steel plate can achieve continuous printing, restart printing before you start cleaning the first, save your time.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon #14
3D Printer Powder Painted PEI Flexi Steel Magnetic Build Plate 235 * 235mm for Creality Ender 3 S1 Pro,Ender 3,Ender 3 Pro,Ender 3 Neo,Ender 3 V2,Ender 3 V2 Neo, Ender 5,Ender 5 Pro
Asin: B09WZSGXFL | Model: CR-Power PEI-235mm | PartNumber: CR-Power PEI-235mm | Ean: 0747976885032 | UPC: 747976885032
Two-In-One Type Of Pei Powder Coated Hardended Steel Spring Sheet Nerver Disforming, Magnetic Base With Strong Magnetism.
No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety.
Easy To Install, Easy To Remove The Models By Bending Or Popping It Off.
Size: 235Mm X 235Mm..
Features
- Compatible with Ender 3, Ender 3 Pro, Ender 3X, Ender 3 V2, Ender 5 ,Ender 5 Pro ,CR 20 Pro. Aquila X2.
- Size: 235mm x 235mm.
- Two-in-one type of PEI powder coated hardended steel spring sheet nerver disforming, Magnetic base with strong magnetism
- Easy to install, easy to remove the models by bending or popping it off
- No more tape, no more glue, no more shovel, and release your printing anxiety
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 1.12 Pounds
See On Amazon #15
IdeaFormer-3D Smooth PEO+Textured PEI Spring Steel Build Plate 235x235mm, Double Sided PEO+PEI Heated Bed for Ender 3/Ender 3 V2/Ender 3 Pro/Neo/Ender 3 S1/Ender 3 S1 Pro/Neptune 3
Asin: B0BYD6C2RN
【High Durability】The Peo Printing Sheet Surface Is Resistant To High Temperatures Of 120°C And The Pei Coating Heated Bed Is 260°C..
【Easy Installation】Put The Peo+Pei Steel Sheet On The Hot Bed Of Your 3D Printer, And It Is Ready To Use. (This Spring Steel Plate Does Not Include Magnetic Build Plate.).
【Compatible 3D Printer 】The Peo+Pei Sheet Plate Fits The Size Of 235 X 235Mm, Such As For Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Neo, Cr20, Cr20 Pro, Ender 5, Ender 5 Pro, Mega Pro, Mega Zero, Kobra, Aquila, Aquila C2, Aquila S2, Aquila X2, Neptune 2, Neptune 2S, Neptune X, Neptune 3/3 Pro /4/4 Pro, Odin-5 F3 Etc..
【Compatible Filaments】Peo Printing Bed Surface Only Prints Pla Filaments; Pei Surface Sheet Most Filaments Such As Pla / Abs / Petg / Tpu / Nylon..
Features
- Smooth PEO+Textured PEI-No Magnetic Build Plate Double sided PEO+PEI heated bed platform produced using advanced technology. One is a smooth PEO printing bed surface, the underside of the printed model is smooth and the model is easy to remove and clean. The other side is PEI frosted bed surface, the textured surface presents a distinctive frosted touch, provides higher adhesion for the model and pressure without warping. There is no magnetic base.
- Compatible Filaments PEO printing bed surface only prints PLA filaments; PEI surface sheet most filaments such as PLA / ABS / PETG / TPU / nylon.
- High Durability The PEO printing sheet surface is resistant to high temperatures of 120 C and the PEI coating heated bed is 260 C.
- Compatible 3D Printer The PEO+PEI sheet plate fits the size of 235 x 235mm, such as for Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Neo, CR20, CR20 Pro, Ender 5, Ender 5 Pro, Mega Pro, mega zero, Kobra, Aquila, Aquila C2, Aquila S2, Aquila X2, Neptune 2, Neptune 2S, Neptune X, Neptune 3/3 Pro /4/4 Pro, Odin-5 F3 etc.
- Easy Installation Put the PEO+PEI steel sheet on the hot bed of your 3D printer, and it is ready to use. (This spring steel plate does not include magnetic build plate.)
- See more on Amazon...
Brand: IdeaFormer-3D | Manufacturer: Bell Tech
See On Amazon #16
HICTOP Double Sided PEI Sheet Smooth/Textured PEI bed and Magnetic build plate with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2 Ender-3 3D printers
Asin: B08PFJKW5J | Model: PEI | PartNumber: PEI
3 Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well, But The Temperature Of The Hotbed Needs To Be About 80-85℃.
5 The Size Of Hictop Pei Bed Is 235*235Mm（9.25*9.25Inch）, It Is Applicable With Creality 3D Printer Such As Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，Cr-20, Cr-20 Pro And Similarly Sized Machines..
4 Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Gentle Flexing Of The Plate Will Help Remove It..
2 The Hictop Textured Pei And The Smooth Pei Sheet Are Very Easy To Use, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top. The Maximum Temperature For Printing Is 120℃ On The Bed..
Features
- 1 The HICTOP double sided PEI sheet is combined with 2 parts, a flexible steel platform coated with textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.
- 2 The HICTOP textured PEI and the smooth PEI sheet are very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 120 on the bed.
- 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85
- 4 Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
- 5 The size of HICTOP PEI bed is 235*235mm 9.25*9.25inch , it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2 Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro CR-20, CR-20 Pro and similarly sized machines.
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
See On Amazon #17
Official Creality Original Ender 3 S1 Pro Build Plate 235x235 Textured PEI Sheet Flexible Spring Steel Magnetic 3D Printer Build Plate for Ender 3/3 V2/3 Pro/5/5 Pro/3 Neo/3 V2 Neo 235x235mm
Asin: B0CTX5SCCS
High Quality Spring Steel - Crafted From High-Precision Spring Steel, Our Build Plate Ensures Exceptional Flatness, Guaranteeing Uniform Layer Adhesion During Printing. Its Elasticity Eases Prints Removal By Gently Bending. The Durable Plate Withstands Heating, Cooling Cycles, And Bending For Extended Use. Excellent Thermal Conductivity Ensures Even Heat Distribution, Preventing Object Contraction Or Deformation, Significantly Enhancing 3D Printing Quality, Convenience, And Durability..
In Order To Save Your Costs And Minimize Unnecessary Waste, This Product Only Includes A Pei Sheet Without Magnetic Sheet. Therefore, It Is Suitable For Users Whose Original Magnetic Sticker Is Still Functional. If The Original Magnetic Sticker Is Damaged, Please Consider Purchasing The Build Plate Kit That Includes Magnetic Sheet..
Efficient Magnetic Design - Magnetic Sheet Base Allows The Build Plate To Be Quickly And Conveniently Replaced Without The Need For Additional Tools Or Fixing Methods. The Inclusion Of Dual Handles And Positioning Holes Ensures That The Build Sheet Can Be Accurately Aligned In A Single Step During Installation, Simplifying The Process And Providing Users With A More Efficient Printing Experience..
The Pei Coating Is Characterized By Its Wear Resistance And High-Temperature Durability. It Is Not Easily Scratched And Is Widely Applicable To Various Printing Materials. It Provides Reliable Adhesion To The Prints Under Both High And Low Temperatures, Ensuring Stable 3D Printing Without Warping And Significantly Improving The Success Rate Of Prints..
Features
- Official Original Build Plate - Offical Creality Ender 3 S1 Pro build plate, with dimensions of 235x235mm and a printing area of 220x220mm. Additionally, it is compatible with other FDM printers of the same size, such as Ender 3, Ender 3S, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Pro, Ender 3 Neo, Ender 3 V2, Ender 3 V2 Neo, Ender 3 V3, Ender 3 V3 KE, Ender 3 V3 SE, Ender 5, Ender 5S, Ender 5 S1, Ender 5 Pro, K1, K1C, KR, CR-10 SE, CR20, CP-01, etc.
- The PEI coating is characterized by its wear resistance and high-temperature durability. It is not easily scratched and is widely applicable to various printing materials. It provides reliable adhesion to the prints under both high and low temperatures, ensuring stable 3D printing without warping and significantly improving the success rate of prints.
- High Quality Spring Steel - Crafted from high-precision spring steel, our build plate ensures exceptional flatness, guaranteeing uniform layer adhesion during printing. Its elasticity eases prints removal by gently bending. The durable plate withstands heating, cooling cycles, and bending for extended use. Excellent thermal conductivity ensures even heat distribution, preventing object contraction or deformation, significantly enhancing 3D printing quality, convenience, and durability.
- Efficient Magnetic Design - Magnetic sheet base allows the build plate to be quickly and conveniently replaced without the need for additional tools or fixing methods. The inclusion of dual handles and positioning holes ensures that the build sheet can be accurately aligned in a single step during installation, simplifying the process and providing users with a more efficient printing experience.
- In order to save your costs and minimize unnecessary waste, this product only includes a PEI sheet without magnetic sheet. Therefore, it is suitable for users whose original magnetic sticker is still functional. If the original magnetic sticker is damaged, please consider purchasing the build plate kit that includes magnetic sheet.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #18
SUNLU Magnetic Build Surface, Good Adhesion, 3pcs Flexible Removable Build Platforms for 3D Printers Ender 3 5 T3, Heated Bed Cover, 9.25x9.25inchs (235x235mm), 2 Coating Surface+1 Base Sticker Sheet
Asin: B0B9M3QTFL | Model: 3D Printer Platforms Magnetic Surface | PartNumber: 3D Printer Platforms Magnetic Surface
②【Good Adhesion】The Magnetic Built Surface Has A Special Coating Layer, Which Makes The Filaments Can Stick To The Printed Bed Easily And Reduces Warping..
⑥【Packing List (3Pcs)】Sunlu 3D Printer Magnetic Build Plate. 3 Pieces Sheet In Total: 2 Pieces Of Coating Surface Sheets And 1 Piece Of Sticker Base Sheet..
④【Fast Heat Conduction】The Thermal Conductivity Of Sunlu Magnetic Build Plate Is Very Good, Which Can Speed Up The Heating Rate, And Reduce Printing Waiting Time..
⑤【Heating Range】The Heating Range Is 0-100 Degrees, Which Is Compatible With Most Fdm 3D Printer Filaments. Pla、Pla Plus、Tpu、Abs、Petg、Asa、Nylon、Others..
③【Easy To Remove】The Magnetic Build Plate Is Removable And Flexible, Just Gently Bend The Print Surface, Remove The 3D Printing Model Easily..
①【Easy To Install】The Magnetic Plate Is Very Easy To Install. The Sticker Base Sheet Has A Good Adhesive On The Back Side, Just Paste The Base Sheet To The Printer Heated Bed, And Then Put The Coating Surface Sheet On The Base Sheet, Ready To Print..
Features
- Please double-check before attaching the base plate sheet: Stick half of sticker base sheet with coating surface sheet and lift it up. It is correct if both sheets can be lifted at the same time. If the two sheets can't be lifted at the same time, please rotate one of them 90 .
- Easy to Install The magnetic plate is very easy to install. The sticker base sheet has a good adhesive on the back side, just paste the base sheet to the printer heated bed, and then put the coating surface sheet on the base sheet, ready to print.
- Good Adhesion The magnetic built surface has a special coating layer, which makes the filaments can stick to the printed bed easily and reduces warping.
- Easy to Remove The magnetic build plate is removable and flexible, just gently bend the print surface, remove the 3D printing model easily.
- Fast Heat Conduction The thermal conductivity of SUNLU magnetic build plate is very good, which can speed up the heating rate, and reduce printing waiting time.
- Heating Range The heating range is 0-100 degrees, which is compatible with most FDM 3D printer filaments. PLA PLA Plus TPU ABS PETG ASA Nylon Others.
- Packing List (3PCS) SUNLU 3D Printer Magnetic Build Plate. 3 pieces sheet in total: 2 pieces of coating surface sheets and 1 piece of sticker base sheet.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
Weight: 0.88 pounds
See On Amazon #19
Official Creality Ultra-Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for CR-10/CR-10S/Ender 3 Max/Ender 3 Max Neo/SV06 Plus/SV04 IDEX/Longer LK5 Pro 3D Printer 310X310MM
Asin: B07JFH3MFK | Model: CR-10-Magnetic | PartNumber: CR-10-Magnetic | Ean: 0667797511692 | UPC: 667797511692
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
Universal: Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Simple Installation: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands.
Features
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate
- UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.93 pounds
See On Amazon #20
Official Creality Ender 3 Double Sided PEI Sheet Magnetic Flexible Steel Build Plate 235*235mm, Smooth +Textured Heated Bed Platform for 3D Printer Ender-3 S1/3 S1 Pro/5S1 Ender-3 Neo/3 V2 Neo/3 V3 SE
Asin: B0BCGJQCRF | Model: 3D-Double-PEI-Black-Gold | PartNumber: 3D-Double-PEI-Black-Gold
【Easy To Remove】With A Magnetic Printing Pei Sheet Plate, You Only Need To Remove It From The Bed And Bend It, Then The Model Can Be Removed. When You Let Go, They Just Return Back To Shape And Will Not Break Easily. No Need To Scratch, Pry And Damage Your Prints!.
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Wide Application】The Double Sided Pei Sheet Can Compatible With Pla/ Petg/ Peek/ Abs And Any Other Filaments. 235*235Mm Pei Sheet 3D Printer Bed Perfect Printing Size Works Well With Ender 3/Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro. (To Be Compatible With Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender-3 Neo/Ender-3 V2 Neo/Ender-3 V3 Se, Please Remove The Two Positioning Screws On The Hotbed First.).
【Double Sided】One Side Is A Smooth Pei Surface, Which Used For The Flat Model, Great Adhesion And Easy To Remove Printings. And The Textured Side Has Excellent Adhesion And Easy Printing Without Any Warping. You Can Get Two Different Printing Experiences With One Plate..
Features
- Quality assurance 100% Official Creality 3D printer PEI Sheet double sided removable magnetic flexible heated bed platform. Smooth one side with coated PEl and Textured the other side with textured sticker. The spring steel plate can withstand the numerous heat cycles that a 3D printer bed goes through from print to print.
- Double Sided One side is a smooth PEI surface, which used for the flat model, great adhesion and easy to remove printings. And the textured side has excellent adhesion and easy printing without any warping. You can get two different printing experiences with one plate.
- Easy to remove With a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the model can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints!
- Wide Application The double sided PEI sheet can compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 235*235mm PEI sheet 3d printer bed perfect printing size works well with Ender 3/Ender 3 v2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender-3 Neo/Ender-3 V2 Neo/Ender-3 V3 SE, please remove the two positioning screws on the hotbed first.)
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon
Looking For Something Else?
Search