5PCS 8825 Stepper Motor Driver Module, Aideepen 8825 Module A4988 for 3D Printer Ramps 1.4 StepStick+Heat Sink
Asin: B09X382335 | Model: 0700165 | PartNumber: 0700165
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.4 Layer Pcb Board, Better Heat Dissipation..
Simple Step And Direction Control Interface.With Over-Temperature Thermal Shutdown, Over-Current Shutdown, And Under-Voltage Lockout Function .More Stable Than A4988 Module..
Small Chip,4 Layer Pcb Board, Lower Heat, Better Heat Dissipation..
Supply Voltage:8.2-45 V ;The Maximum Current Of 2.5A..
Features
- 8825 Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
- Supply voltage:8.2-45 V ;the Maximum current of 2.5A.
- 4 layer PCB board, better heat dissipation.
- Small chip,4 layer PCB board, lower heat, better heat dissipation.
- Simple step and direction control interface.With over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout function .More stable than A4988 module.
- See more on Amazon...
Brand: Aideepen | Manufacturer: Aideepen
See On Amazon Similar To 5PCS 8825 Stepper Motor Driver
#1
HiLetgo 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap Suitable for Mendel Huxley Arduino
Asin: B07BND65C8 | Model: 3-01-0108-5pcs | PartNumber: 3-01-0108-5pcs
Adjustable Current Control Lets You Set The Maximum Current Output With A Potentiometer.
Over-Temperature Thermal Shutdown, Under-Voltage Lockout, And Crossover-Current Protection.
Intelligent Chopping Control That Automatically Selects The Correct Current Decay Mode (Fast Decay Or Slow Decay).
Five Different Step Resolutions: Full-Step, Half-Step, Quarter-Step, Eighth-Step, And Sixteenth-Step. Output Drive Capacity Of Up To 35 V And ± 1.2 A.
Features
- Simple step and direction control interface,Take anti-static measures before you use the A4988 modules in case of short-circuit
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step. Output drive capacity of up to 35 V and 1.2 A
- Adjustable current control lets you set the maximum current output with a potentiometer
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #2
STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-Step Resolutions for Nema 17 and 23 Stepper Motor
Asin: B06Y5VPSFN | Model: DM542T | PartNumber: DM542T | Ean: 0715624558829, 0715776647549, 0714485410482 | UPC: 714485410482, 715624558829, 715776647549
1.0~4.2A, 20~50Vdc, 1/128 Microstep Resolution.
100% Service Satisfactory. We Provided This Stepper Motor Kit With 30 Days Free Replacement Or Refund, 1 Year Warranty And Whole Life Customer Service From The Date Of Purchasing..
Pulse Signal: 4-5V When Pul-High, 0-0.5V Whenpul-Low. The Same As Dir And Ena Signals.
Industrial-Grade Stepper Driver, Suit For Nema 17 And 23 Stepper Motor.
Features
- Stepper motor driver DM542T is updated to version V4.0, add 5V/24V logical voltage selector, alarm outputs. Please attention, Factory setting is 24V, if you need to use 5V, switch selector on the top of the driver.
- Industrial-grade Stepper Driver, Suit for Nema 17 and 23 Stepper Motor
- 1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution
- Pulse signal: 4-5V when PUL-HIGH, 0-0.5V whenPUL-LOW. The same as DIR and ENA signals
- 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing.
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OMC CORPORATION LIMITED
Dimensions: 1.00 x 0.00 x 2.97 inches | Weight: 0.46 pounds
See On Amazon #3
ELEGOO 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board Compatible with Arduino
Asin: B01CP18J4A | Model: EL-SM-003 | PartNumber: EL-SM-003 | Ean: 0746591610357 | UPC: 746591610357
5 Line 4 Phase Can Be Used For Ordinary Uln2003 Chip Driver, Connect To The 2 Phase , Support The Development Board，With Convenient Use, Direct Docking.
Great Packing In A Box : 5 Set Uln2003 Stepper Motor + Driver Board (With A Little Gift).
Drive Module Board Size(In): 1.37*1.18*0.6 ; Stepper Motor Diameter: 1.06(In) ; Stepper Motor Lines: 9.45(In).
A, B, C, D Four-Phase Led Indicates The Status Of The Stepper Motor Work..
Features
- Stepper motor with a standard interface, when used directly pluggable.
- A, B, C, D four-phase LED indicates the status of the stepper motor work.
- 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board With convenient use, direct docking
- Drive Module Board Size(in): 1.37*1.18*0.6 ; Stepper Motor diameter: 1.06(in) ; Stepper Motor lines: 9.45(in)
- Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board (with a little gift)
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 2.00 x 5.00 x 5.00 Inches | Weight: 0.65 Pounds
See On Amazon #4
Stepper Motor Driver Controller Integrated Board Forward/Reverse Pulse Speed Angle Control Module PLC Serial Communication for NEMA 17 23 Motor
Asin: B0B1HNS9L2 | Model: 4257 | PartNumber: 4257 | Ean: 0706316482645 | UPC: 706316482645
[4 Control Mode] In Addition To Its Built-In Parameters Work Mode,It Can Also Control By External Buttons Or Others Driver Or Uart Commands.
[Hd Lcd Display] The Hd Lcd Can Clearly Display The Speed/Delay/Cycle Times, Making It Easier To Browse And Set Various Parameters. Realize High-Precision Control Of The Motor. Parameters Support Memory Function That Will Not Be Lost.
[9 Work States] Built-In 9 Default Workflow Programs, Covering Most Applications, To Meet The Needs Of Different Scenarios.Forward/Reverse/Delay/Loop/Self-Locking/No-Lock/Rotating Speed And So On.
[Forward & Reverse] It Can Not Only Change Rotation Direction By Pressing Button, But Also By Potentiometer. It Is Also Automatically Change The Direction Through The Selected Working Mode To Achieve Multi-Scene And Multi-Application.
Features
- [Controller & Driver] Integrated step motor controller and driver functions.It can not only realize the drive motor, but also control the working state of the stepper motor in real time
- [Forward & Reverse] It can not only change rotation direction by pressing button, but also by potentiometer. It is also automatically change the direction through the selected working mode to achieve multi-scene and multi-application
- [4 Control Mode] In addition to its built-in parameters work mode,it can also control by external buttons or others driver or UART commands
- [9 work states] Built-in 9 default workflow programs, covering most applications, to meet the needs of different scenarios.Forward/Reverse/Delay/Loop/Self-locking/No-lock/Rotating speed and so on
- [HD LCD display] The HD LCD can clearly display the speed/delay/cycle times, making it easier to browse and set various parameters. Realize high-precision control of the motor. Parameters support memory function that will not be lost
- See more on Amazon...
Brand: BANRIA | Manufacturer: BANRIA
Dimensions: 1.61 x 3.11 x 1.69 inches | Weight: 0.14 pounds
See On Amazon #5
EASON Stepper Motor Driver TB6600 4A DC9-42V 32 Subdivision for Nema 17, 23 Series Stepper Motor CNC Controller Single Axis Hybrid MicroStepping
Asin: B08SG7L54W | Ean: 0653871352206 | UPC: 653871352206
Suitable For Drive Two-Phase Stepping Motor Dynamic Voltage 9V To 42V, The Maximum Drive Current Is Less Than 4A..
Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
Suitable For Step Motor:Nema(17,23) 42, 57 Type 2 Phase 4 Phase (4 / 6 / 8 Wires).
The Subdivision Is Increased To 32 Subdivision, Which Is Suitable For High Subdivision..
Features
- This driver is an upgraded version of TB6600 and with plastic cover.
- The subdivision is increased to 32 subdivision, which is suitable for high subdivision.
- Suitable for drive Two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A.
- Suitable for step motor:NEMA(17,23) 42, 57 type 2 phase 4 phase (4 / 6 / 8 wires)
- Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- See more on Amazon...
Brand: Eason | Manufacturer: Yisheng Technology
Dimensions: 0.00 x 3.74 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #6
Usongshine TB6600 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Phase Hybrid Stepper Motor for CNC/42 57 86 Stepper Motor 1 pcs)
Asin: B07HHS14VQ | Model: TB6600-4A | PartNumber: TB6600-4A | Ean: 1006410064105
✿The Largest 32 Subdivision Of The 6 Models Are Optional; Suitable For 4Wires, 6 Wires And 8 Wires Stepper Motor. It Can Control 2 Phase Stepper Motor Forward And Reverse Rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 Phase Excitation Mode..
✿Suitable For A Wide Range Of Stepping Motors Of Nema 17, 23 And 24 Can Used In Various Kinds Of Machines, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, Pick-Place Devices And So On..
✿Protect Form✿: Energy-Saving Semi-Automatic Current Lock Function, Built-In Temperature Protection And Over Current Protection, Under Voltage Protection, Preventing Reverse..
✿Stepper Motor Driver✿: 9V-42V Dc Power Supply, H Bridge Bipolar Constant Phase Flow Drive. The Maximum 4.0A Of The Eight Kinds Of Output Current..
Features
- Package included: 1 x Stepper Motor Driver.
- Stepper Motor Driver : 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current.
- The largest 32 subdivision of the 6 models are optional; Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
- Protect form : Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection, under voltage protection, Preventing reverse.
- Suitable for a wide range of stepping motors of Nema 17, 23 and 24 can used in various kinds of machines, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, pick-place devices and so on.
- See more on Amazon...
Brand: Usongshine | Manufacturer: Usongshine
Dimensions: 1.10 x 3.74 x 3.74 inches
See On Amazon #7
Dr.Roc GM Instrument Cluster Gauge Stepper Motor Repair Kit X27 168 (7 Motors,10 Backlight Bulbs,1 Remove Tool,Flux Rosin Core Solder)
Asin: B01B782OFC | Model: Dr02-X27-168 | PartNumber: Dr02-X27-168 | Ean: 0728360715630 | UPC: 728360715630
Each Gauges Of Your Instrument Cluster Need One Motor,Since One Stepper Motor Went Out Will Result All The Motors Go Out Soon. Check The Stepper Motor Quantity Of Your Vehicles To Decide To Buy The 6 Or 7 One.
Dr.Roc-Most Trusted Auto Accessories Expert,Millions Buyers' Choice, Excellent Customer Service With 12-Month Warranty.
It Is Easy To Use,But You’D Better To Search The Instructions Video On Internet First,Which Is Very Helpful.
Used For The Repair Of The Speedometer,Tachometer,Oil Pressure Gauge,Transmission Temperature Gauge, Battery Voltage Gauge, Water Temperature Gauge Or Fuel Gauge;Solve The Common Problems Of Your Vehicles Such As:Gauges Dead,Chatter,Sticking,False/Jumpy/Inaccurate Readings,Pegged Out To The Left Or Right Of The Dial, Ratchet Up Or Down,Sticky Needle Movement,Erratic Gauge Movement Etc.
Features
- The latest generation,Premium stepper motors,quiet operation and reliability,Perfectly Replace for the older and faulty XC5-168, X15-168 ,X25-168 and X27-168 stepper motors that came in your vehicles,Use the tool on the upper left corner to check whether this product fits your vehicles
- Used for the repair of the speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel gauge;Solve the common problems of your vehicles such as:gauges dead,chatter,sticking,false/jumpy/inaccurate readings,pegged out to the left or right of the dial, ratchet up or down,sticky needle movement,erratic gauge movement etc
- Each gauges of your instrument cluster need one motor,since one stepper motor went out will result all the motors go out soon. check the stepper motor quantity of your vehicles to decide to buy the 6 or 7 one
- It is easy to use,but you d better to search the instructions Video on Internet first,which is very helpful
- Dr.Roc-Most trusted auto accessories expert,millions buyers' choice, excellent customer service with 12-month warranty
- See more on Amazon...
Brand: Dr.Roc | Manufacturer: Dr.Roc
Dimensions: 0.00 x 0.01 x 0.00 inches | Weight: 0.15 Pounds
See On Amazon #8
HiLetgo 5pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board for Arduino PI PIC Raspberry Pi
Asin: B00LPK0E5A | Model: 3-01-0153 | PartNumber: 3-01-0153 | Ean: 0702082654729 | UPC: 702082654729
Diameter: 28Mm.
Speed Down Stepping Motor.
Voltage: 5V.
Stepping Angle: 5.625 X 1/64.
Features
- HiLetgo Stepper Motor+ Driver Board
- Stepping angle: 5.625 X 1/64
- Diameter: 28mm
- Voltage: 5V
- Speed down stepping motor
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #9
Nema 23 Stepper Motor 4.2A 3.0Nm (425oz.in) 100mm Length with 8mm Shaft for CNC Mill Lathe Router
Asin: B081VD4C28 | Ean: 0720066769252 | UPC: 720066769252
The Most Powerful Nema 23 Stepper Motor Available. Ideal For Cnc Mill Lathe Router..
8Mm Motor Shaft..
Recommend Using Stepper Motor Driver With Voltage Of 24-50Vdc And At Least 4.2A Current..
3.0Nm (425Oz.In) Torque..
Features
- Nema 23 100mm length stepper motor.
- 3.0Nm (425oz.in) torque.
- The most powerful Nema 23 stepper motor available. Ideal for CNC Mill Lathe Router.
- Recommend using stepper motor driver with voltage of 24-50VDC and at least 4.2A current.
- 8mm motor shaft.
- See more on Amazon...
Brand: HobbyUnlimited | Manufacturer: HobbyUnlimited
Dimensions: 2.24 x 4.44 x 4.44 Inches
See On Amazon #10
CNC Digital Stepper Driver DM556 Stepper Motor Controller 2-phase Stepper Motor Driver 20-50V DC Max 5.6A 128 subdivision For Nema 23, 24 and Nema 34 stepper motor
Asin: B08J3NFF9V | Ean: 0791548328502 | UPC: 791548328502
Anti-Resonance For Optimal Torque, Extra Smooth Motion, Low Motor Heating And Noise.
Please Note: If There Is Any Problem, Please Feel Free To Contact Us, Each Defect Items Could Be Refunded Or Reshipped, We Will Try Out Utmost To Support You..
Package: 1Piece Dm556 Driver.
This High Subdivision Driver Is Suitable For High Subdivision Motor. Suitable For Stepper Motor: 57,60,86 Type 2-Phase (4-Wire, 6-Wire, 8-Wire).
Features
- Suitable for Nema 23 ,Nema 24 and Nema34 Stepper Motor 2-phase hybrid stepper motors (Outer diameter: 57, 60,86mm).
- This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor: 57,60,86 type 2-phase (4-wire, 6-wire, 8-wire)
- Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
- Package: 1piece DM556 driver
- PLEASE NOTE: if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you.
- See more on Amazon...
Brand: HoCenWay | Manufacturer: HONGCHENWEI
Dimensions: 1.34 x 4.41 x 2.97 inches
See On Amazon #11
HiLetgo 5pcs DRV8825 Stepper Motor Driver Module for 3D Printer RepRap 4 RAMPS1.4 StepStick
Asin: B01NCE3ZW1 | Model: 3-01-1177 | PartNumber: 3-01-1177
4-Layer, 2 Oz Copper Pcb For Improved Heat Dissipation.
Simple Step And Direction Control Interface.
Can Interface Directly With 3.3 V And 5 V Systems.
45 V Maximum Supply Voltage.
Features
- DRV8825 Stepper Motor Driver Module
- 45 V maximum supply voltage
- 4-layer, 2 oz copper PCB for improved heat dissipation
- Can interface directly with 3.3 V and 5 V systems
- Simple step and direction control interface
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #12
STEPPERONLINE High Torque Nema 23 CNC Stepper Motor 114mm 425oz.in/3Nm CNC Mill Lathe Router
Asin: B00PNEPW4C | Model: 23HS45-4204S | PartNumber: 23HS45-4204S | Ean: 0715624558850, 0701056340255 | UPC: 701056340255, 715624558850
Nema 23 Bipolar 2.24"X2.24"X4.45" 4-Wire.
Rated Current 4.2A & Resistance 0.9Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
3Nm(425Oz.In) Holding Torque.
Features
- Very Huge Torque
- 3Nm(425oz.in) holding torque
- NEMA 23 bipolar 2.24x2.24x4.45 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 4.2A & resistance 0.9ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
Dimensions: 2.24 x 2.24 x 4.45 inches | Weight: 3.69 Pounds
See On Amazon #13
DC 5-30V 4A Stepper Motor Driver Controller Integrated Board Forward/Reverse Pulse Speed Angle Control Module PLC Serial Communication for NEMA 17 23 Motor
Asin: B0C2V4BF86 | Model: 743645935459 | PartNumber: 743645935459 | Ean: 0743645935459 | UPC: 743645935459
9 Working Modes: The Module Has Built-In Multiple Fixed Operation Modes, And Users Can Quickly Select The Appropriate Motion Trajectory To Meet Different Application Scenarios.
Lcd Display: The Lcd Screen Can Clearly Display The Speed/Delay/Cycle Time, Control The Motor With High Precision, And The Controller Parameters Support The Memory Function That Will Not Be Lost.
4 Control Mode : In Addition To Its Built-In Parameters Work Mode,It Can Also Control By External Buttons Or Others Driver Or Uart Commands.
Motor Type : Working For Dc10-30V Two Phase 4-Wire 5-Wire 6-Wire 8-Wire Stepper Motor.
Features
- 2 in 1 :This SMC02 is Stepper motor controller + stepper motor driver, which can be directly connected to the stepper motor.
- Motor Type : Working for DC10-30V Two phase 4-wire 5-wire 6-wire 8-wire stepper motor
- 9 Working Modes: The module has built-in multiple fixed operation modes, and users can quickly select the appropriate motion trajectory to meet different application scenarios
- 4 Control Mode : In addition to its built-in parameters work mode,it can also control by external buttons or others driver or UART commands
- LCD Display: The LCD screen can clearly display the speed/delay/cycle time, control the motor with high precision, and the controller parameters support the memory function that will not be lost
- See more on Amazon...
Brand: TKXEC | Manufacturer: TKXEC
See On Amazon #14
Dr.Roc Instrument Cluster Gauge Stepper Motor Repair Kit X27 168 (6 Motors,10 Backlight Bulbs,1 Remove Tool,Flux Rosin Core Solder)
Asin: B01ABO1LAM | Model: DR01-X27-168 | PartNumber: DR01-X27-168 | Ean: 0724500999540 | UPC: 724500999540
Each Gauges Of Your Instrument Cluster Need One Motor,Since One Stepper Motor Went Out Will Result All The Motors Go Out Soon. Check The Stepper Motor Quantity Of Your Vehicles To Decide To Buy The 6 Or 7 One.
Dr.Roc-Most Trusted Auto Accessories Expert,Millions Buyers' Choice, Excellent Customer Service With 12-Month Warranty.
It Is Easy To Use,But You’D Better To Search The Instructions Video On Internet First,Which Is Very Helpful.
Used For The Repair Of The Speedometer,Tachometer,Oil Pressure Gauge,Transmission Temperature Gauge, Battery Voltage Gauge, Water Temperature Gauge Or Fuel Gauge;Solve The Common Probblem Of Gm Vehicles Such As:Gauges Dead,Chatter,Sticking,False/Jumpy/Inaccurate Readings,Pegged Out To The Left Or Right Of The Dial, Ratchet Up Or Down,Sticky Needle Movement,Erratic Gauge Movement Etc.
Features
- The latest generation,Premium stepper motors,quiet operation and reliability,Perfectly Replace for the older and faulty XC5-168, X15-168 ,X25-168 and X27-168 stepper motors that came in your vehicles,Use the tool on the upper left corner to check whether this product fits your vehicles
- Used for the repair of the speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel gauge;Solve the common probblem of GM vehicles such as:gauges dead,chatter,sticking,false/jumpy/inaccurate readings,pegged out to the left or right of the dial, ratchet up or down,sticky needle movement,erratic gauge movement etc
- Each gauges of your instrument cluster need one motor,since one stepper motor went out will result all the motors go out soon. check the stepper motor quantity of your vehicles to decide to buy the 6 or 7 one
- It is easy to use,but you d better to search the instructions Video on Internet first,which is very helpful
- Dr.Roc-Most trusted auto accessories expert,millions buyers' choice, excellent customer service with 12-month warranty
- See more on Amazon...
Brand: Dr.Roc | Manufacturer: Dr.Roc
Dimensions: 2.17 x 0.01 x 2.17 inches | Weight: 0.23 pounds
See On Amazon #15
STEPPERONLINE Nema 23 Stepper Motor 2.4Nm(339.79oz.in) 4.0A 8mm Shaft 57x57x82mm 4 Wires
Asin: B091C37FJ2 | Model: 23HS32-4004S | PartNumber: 23HS32-4004S | Ean: 0750226819848 | UPC: 750226819848
Nema 23 Motor Driving Voltage Is 24-48Vdc, Suggest 36 Vdc.
1.8 Deg. Step Angle(200 Steps/Rev).
*Rated Current/Phase: 4.0A, Phase Resistance: 0.65Ohms.
2.4Nm(339.79Oz.In) Holding Torque.
Features
- Nema 23 stepper motor with 8mm shaft
- 2.4Nm(339.79oz.in) Holding Torque
- Nema 23 motor driving voltage is 24-48VDC, suggest 36 VDC
- *Rated Current/phase: 4.0A, Phase Resistance: 0.65ohms
- 1.8 deg. step angle(200 steps/rev)
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
Weight: 2.65 pounds
See On Amazon #16
cciyu 2Pack Universal X27 168 Stepper Motor Instrument Cluster Repair Speedometer Gauge
Asin: B075GK9NBH | Model: 803570-5210-1430581 | PartNumber: 803570-5210-1430581 | Ean: 0611040267140 | UPC: 611040267140
To Repair Speedometer, Tachometer, Fuel, Temp Or Any Other Gauges..
Attention:Make Sure You Can Handle This Work, It May Need Some Professional Equipment Of Pc Boards..
Application: For Instrument Panel,Gauge Cluster,Temp Gauge,Tachometer,Speedometer.
Fixed Problems Like(Caused By Motor Stepper):Gauge's Sticking, Shuttering;Chatters,Inaccurate;Gauge Giving False Readings;Staying Pegging Out;Gauge Dead,Etc..
Features
- Feature:2Pack white Stepper motor,less than20mA,5V
- Fixed problems like(caused by Motor Stepper):Gauge's sticking, shuttering;chatters,inaccurate;Gauge giving false readings;staying pegging out;Gauge dead,etc.
- To repair speedometer, tachometer, fuel, temp or any other gauges.
- Application: For Instrument Panel,Gauge Cluster,Temp Gauge,Tachometer,Speedometer
- Attention:Make sure you can handle this work, it may need some professional equipment of PC Boards.
- See more on Amazon...
Brand: cciyu | Manufacturer: cciyu
Dimensions: 0.04 x 0.08 x 0.08 Inches | Weight: 0.07 Pounds
See On Amazon #17
6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board
Asin: B07YRHX73L | Model: Atnsinc-01 | PartNumber: Atnsinc-01 | Ean: 0701715431065 | UPC: 701715431065
A, B, C, D Four-Phase Led Indicates The Status Of The Stepper Motor Work..
Great Packing In A Box : 6 Pcs Uln2003 Stepper Motor + Driver Board (With A Little Gift)..
5 Line 4 Phase Can Be Used For Ordinary Uln2003 Chip Driver, Connect To The 2 Phase, Support The Development Board, With Convenient Use, Direct Docking..
Drive Module Board Size(In): 1.37 * 1.18 * 0.6(In); Stepper Motor Diameter: 1.06(In); Stepper Motor Lines: 9.45(In)..
Features
- The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable.
- Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in); Stepper Motor diameter: 1.06(in); Stepper Motor lines: 9.45(in).
- A, B, C, D four-phase LED indicates the status of the stepper motor work.
- 5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking.
- Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift).
- See more on Amazon...
Brand: Atnsinc | Manufacturer: Atnsinc
Weight: 0.49 Pounds
See On Amazon #18
10 Pieces Stepper Motor Driver Module with Heat Sink Compatible with Stepstick Stepper A4988 3D Printer Reprap, CNC Machine or Robotics
Asin: B09FQ3G5XQ | Model: Photect-Driver Module-09 | PartNumber: Photect-Driver Module-09
Five-Step Resolution: There Are 5-Steps Resolution Of The Stepper Motor Drive Modules, Such As Full-Step, Half-Step, Quarter-Step, Eight-Step, Sixteen-Step, And The Output Drive Capacity Is Up To 35V And -2A~2A.
Wide Application: The Stepper Motor Drive Module Is Compatible With Stepper Motor/ 3D Printer/ Cnc/ Engraving Machine/ Supported 3D Printer And More; Please Confirm Whether The Product Model Is Suitable Before Buying.
Protection Function: The Stepper Motor Drive Modules Can Provide Thermal Shutdown Protection, Over Current Protection, Ground Fault Protection And Crossing Current Protection.
Easy To Operate: This Is A Complete Micro-Stepping Motor Driver With A Built-In Converter, Easy To Operate; When Micro-Stepping Is Running, The Chopper Control Compatible With A4988 Can Automatically Select The Current Decay Mode, Slow Or Mixed.
Features
- The package includes: you will receive 10 pieces of stepper motor drive modules and 10 heat sink in the package, enough quantity for your use and replacement
- Easy to operate: this is a complete micro-stepping motor driver with a built-in converter, easy to operate; When micro-stepping is running, the chopper control compatible with A4988 can automatically select the current decay mode, slow or mixed
- Five-step resolution: there are 5-steps resolution of the stepper motor drive modules, such as full-step, half-step, quarter-step, eight-step, sixteen-step, and the output drive capacity is up to 35V and -2A~2A
- Protection function: the stepper motor drive modules can provide thermal shutdown protection, over current protection, ground fault protection and crossing current protection
- Wide application: the stepper motor drive module is compatible with stepper motor/ 3D printer/ CNC/ engraving machine/ supported 3D printer and more; Please confirm whether the product model is suitable before buying
- See more on Amazon...
Brand: Photect | Manufacturer: Photect
See On Amazon #19
Twotrees Nema17 Stepper Motor 17HS 4023 Stepper Motor Bipolar 42 Motor 4-Lead Wire with 1m Cable 23mm 42BYGH 1.5A Motor for CNC XYZ 3D Printer
Asin: B07TGJSNJB | Model: Twotrees-16570 | PartNumber: Twotrees-16570
Wide Application: This Small Stepper Motors Can Be Used In Various Area, Such As 3D Printer; Stage Lighting; Laser Engraving; Textile Machinery; Medical Equipment; Placement Machine; Non-Standard Equipment; Automation Equipment Etc..
What Do You Get: The Package Includes 1* 23Mm Stepper Motor/1Pcs 1M 4Pins Cable And Connector (Size: 42Mm X 42Mm X 23Mm/1.65''X1.65''X0.9'' ,Nema 17 Bipolar 4-Wire:Black: A+, Green: A-, Red: B+, Blue: B-.
Excellent Service: Ce Certified：Each Nema 17 Stepper Motor Has Undergone A Rigorous Quality Control Ex Works, Can Carry Out A 24-Month Quality Assurance . If Need Further Please Feel Free Contact Us, We Very Happy To Assist You..
Low Resistance: Twotrees Stepper Motor Can Get A Lower Resistance Value Compared To Motors Of The Same Thickness And Torque. This Considerably Increases The Thermal Conductivity Of The Motor. This Effectively Reduces The Increase In Temperature..
Features
- High Torque: Adopting high quality motor steel material,with high torque 13Ncm(18.4oz.in), low self-inductance reactance, responsive and can avoid system error.
- Low Resistance: Twotrees stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.
- Wide Application: This small stepper motors can be used in various area, such as 3D printer; stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; automation equipment etc.
- Excellent Service: CE certified Each nema 17 stepper motor has undergone a rigorous quality control ex works, can carry out a 24-month quality assurance . If need further please feel free contact us, we very happy to assist you.
- What Do You Get: The package includes 1* 23mm Stepper Motor/1pcs 1m 4pins cable and connector (Size: 42mm X 42mm X 23mm/1.65''x1.65''x0.9'' ,NEMA 17 bipolar 4-wire:Black: A+, Green: A-, Red: B+, Blue: B-
- See more on Amazon...
Brand: Twotrees | Manufacturer: Twotrees
Dimensions: 0.91 x 0.00 x 0.00 inches | Weight: 0.35 pounds
See On Amazon
Looking For Something Else?
Search