JESSINIE 2.8" SPI TFT LCD Display Module Touch Panel ILI9341 2.8 Inch TFT LCD Monitor with Stylus 240x320 Touch Screen Monitor Module for Arduino
Asin: B0B7MJK826
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Lcd Module Adopts A 4-Wire Spi Communication Mode, The Driver Ic Is Ili9341, The Resolution Is 240X320, And It Has Touch Function..
Viewing Angle:>60 °, Working Voltage: 3.3V/5V, Power Consumption: About 90Ma.
The Screen Supports Rotating Display, Scrolling Display And Video Playback, With Various Display Modes..
Using Spi Serial Bus, Only A Few Io Can Light Up The Display, And With Sd Card Slot To Facilitate The Expansion Experiment.
Features
- This module includes LCD display screen, backlight control circuit and touch screen control circuit. 2.4 inch color screen, support 16 BIT RGB 65K color display, display color is rich
- Using SPI serial bus, only a few IO can light up the display, and with SD card slot to facilitate the expansion experiment
- The LCD module adopts a 4-wire SPI communication mode, the driver IC is ILI9341, the resolution is 240x320, and it has touch function.
- The screen supports rotating display, scrolling display and video playback, with various display modes.
- Viewing angle:>60 , working voltage: 3.3V/5V, power consumption: about 90mA
- See more on Amazon...
Brand: JESSINIE | Manufacturer: JESSINIE
See On Amazon Similar To JESSINIE 2.8 SPI TFT LCD
#1
HiLetgo 3.5" TFT LCD Display ILI9486/ILI9488 480x320 36 Pins for Arduino Mega2560
Asin: B073R7Q8FF | Model: 3-01-1434 | PartNumber: 3-01-1434
Onborad Level Conversion Chip For 5V/3.3V Mcu.
Compatible With Arduino-Series Development Board. (Please Notice:This Screen Is Not Touch Screen).
Compatible With 3.3/5V Operation Voltage Level.
Support Arduino Mega2560 Directly Inserted.
Features
- 3.5" TFT LCD Display ILI9486/ILI9488 480x320 Suitable for MEGA2560
- Support Arduino Mega2560 Directly inserted
- OnBorad level conversion chip for 5V/3.3V MCU
- Compatible with 3.3/5V operation voltage level
- Compatible with Arduino-Series development Board. (Please notice:This Screen is not touch screen)
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #2
HiLetgo ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 with PCB 5V/3.3V STM32
Asin: B073R7BH1B | Model: 3-01-1433 | PartNumber: 3-01-1433
Viewing Direction: 6 O’Clock.
With Pcb Plate (Including Power Supply Ic, Sd), Compatible With 5110 Interface.
Pixel Arrangement: Rgb Vertical Stripe.
Resolution (Dots): 240Rgb*320Dots.
Features
- Driver element: a-Si TFT active matrix
- Resolution (dots): 240RGB*320Dots
- Viewing Direction: 6 o clock
- Pixel arrangement: RGB vertical stripe
- With PCB plate (including power supply IC, SD), compatible with 5110 interface
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
BIGTREETECH TFT35 SPI V2.1 Graphic Smart Display Compatible BTT Manta M8P/M4P/M5P, Manta E3EZ Control Board + CB1 Support Running Klipper Firmware DIY Upgrade 3D Printer
Asin: B0BSCQNF28 | Model: KINGPRINTER-1040000035 | PartNumber: KINGPRINTER-1040000035
3. It Is Connected With The Main Board Through Fpc Cable, Which Is Simple And Convenient To Operate;.
5. Currently, It Only Supports Bigtreetech Cb1. If You Use Cb1 V2.2, You Only Need To Use With Tft35 Spi V2.1; If You Use Cb1 V2.1, You Need To Use With Tft35 Spi V2.1+Io2can V1.0. If You Have Any Questions, You Can Contact Us At Any Time, And We Will Answer Your Questions..
4. Designed With Xh2.54 Terminal, Which Can Communicate With The Board Through The Terminal..
2. Each Motor Drive Shall Select Power Supply, Motor Power Supply Or Main Power Supply (Heating Rod Power Supply) Separately;.
Features
- 1. LCD display adopts SPI, touch adopts I2C communication mode, and shares the main control chip with the motherboard, which greatly reduces the cost of touch screen;
- 2. Each motor drive shall select power supply, motor power supply or main power supply (heating rod power supply) separately;
- 3. It is connected with the main board through FPC cable, which is simple and convenient to operate;
- 4. Designed with XH2.54 terminal, which can communicate with the board through the terminal.
- 5. Currently, it only supports BIGTREETECH CB1. If you use CB1 V2.2, you only need to use with TFT35 SPI V2.1; If you use CB1 V2.1, you need to use with TFT35 SPI V2.1+IO2CAN V1.0. If you have any questions, you can contact us at any time, and we will answer your questions.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #4
DIANN 2.8" ILI9341 SPI TFT LCD Display Touch Panel 320x240 TFT LCD Touch Screen Shield 5V/3.3V STM32 Display Module SPI Serial with Touch Pen
Asin: B0BNQBKFCT | Ean: 0687117701251 | UPC: 687117701251
Compatible With Arduino R3 Controller Board,Which Will Improve Your Project Operations.
Spi Serial,Built-In Ili9341 Driver Ic And Power Supply Ic.
2.8” Ili9341 Spi Tft Lcd Display Designed With A Sd Card Socket On The Back.
With Touch Pen Inside, Support Touch Screen Function,More Easily To Use.
Features
- 2.8 ILI9341 SPI TFT LCD Display Touch Panel 320x240 Pixels RGB Colorful Display LCD Screen
- With Touch Pen Inside, Support Touch Screen Function,More Easily to Use
- Compatible with Arduino R3 Controller Board,Which Will Improve Your Project Operations
- 2.8 ILI9341 SPI TFT LCD Display Designed With a SD Card Socket On the Back
- SPI Serial,Built-in ILI9341 Driver IC and Power Supply IC
- See more on Amazon...
Brand: DIANN | Manufacturer: DIANN
Dimensions: 0.20 x 3.30 x 1.90 inches
See On Amazon #5
HiLetgo 2.2 Inch ILI9341 SPI TFT LCD Display 240x320 ILI9341 LCD Screen with SD Card Slot for Arduino Raspberry Pi 51/AVR/STM32/ARM/PIC
Asin: B01CZL6QIQ | Model: 3-01-0191-AU-1PC | PartNumber: 3-01-0191-AU-1PC
Support Serial Spi Mode, Interface 4-Wire Spi, Need 4 Ios From Your Mcu Only.
5V Compatible, Use With 3.3V Or 5V Logic.
Support A Variety Of Microcontroller Io Connection, Professional And Practical.
2.4 Inch Tft Lcd Shield Without Touch Panel, Fast To Operate.
Features
- Durable hard PCB board and SD card socket, ideal for 5110 interface
- 2.4 inch TFT LCD shield without touch panel, fast to operate
- Support Serial SPI Mode, Interface 4-Wire SPI, Need 4 IOs from your MCU only
- Support a variety of microcontroller IO connection, professional and practical
- 5V compatible, use with 3.3V or 5V logic
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #6
HiLetgo 2.4" SPI TFT LCD Display 2.4 Inch ILI9341 Touch Panel LCD ILI9341 240x320 5V 3.3V
Asin: B07WNLNRDN
Display Area:36.72(W)X48.96(H)Mm.
Driver Ic: Ili9341.
Driver Element: A-Si Tft Active Matrix.
Size:2.4" Spi Serial.
Features
- Type: without touch panel
- Size:2.4 SPI Serial
- Display area:36.72(W)X48.96(H)mm
- Driver element: a-Si TFT active matrix
- Driver IC: ILI9341
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 0.59 x 3.07 x 0.00 inches
See On Amazon #7
DSD TECH 1.8 Inch TFT LCD Display Module with SPI Interface for Arduino and MCU
Asin: B07WDJ3TV6 | Ean: 0734678383188 | UPC: 734678383188
Support 16Bit Rgb 65K Color Display, 128X160 Resolution, St7735s Driver Chip, Working Voltage Is 5V/3.3V, Weight Is 15G.
Dsd Tech Offer A One-Year Warranty And Lifetime Technical Support For This Module. If You Have Any Questions, Please Feel Free To Contact Us! We Will Respond To You Within 24 Hours..
Dsd Tech Provides Sample Code For The Arduino For This Tft Lcd. With The Sample Code, You Can Use This Lcd Screen In 10 Minutes..
The Tft Lcd Display Can Be Directly Inserted Into Arduino, Which Is Convenient And Quick. Using Spi Communication Mode, Only 4 Ios Are Needed To Illuminate The Display, And The Sd Card Slot Is Convenient For Function Expansion..
Features
- This is a 1.8 inch color screen that can display fullcolors, suitable for electronic enthusiasts and students to use in development boards such as arduino and raspberry pi.
- The TFT LCD display can be directly inserted into arduino, which is convenient and quick. Using SPI communication mode, only 4 IOs are needed to illuminate the display, and the SD card slot is convenient for function expansion.
- Support 16BIT RGB 65K color display, 128X160 resolution, ST7735s driver chip, working voltage is 5V/3.3V, weight is 15g
- DSD TECH provides sample code for the Arduino for this TFT LCD. With the sample code, you can use this LCD screen in 10 minutes.
- DSD TECH offer a one-year warranty and lifetime technical support for this Module. If you have any questions, please feel free to contact us! We will respond to you within 24 hours.
- See more on Amazon...
Brand: DSD TECH | Manufacturer: DSD TECH
Dimensions: 0.98 x 2.76 x 1.57 inches | Weight: 0.03 Pounds
See On Amazon #8
WWZMDiB TFT LCD Touch Display Module SPI Interface for Arduino (2.8", 320x240, ILI9341)
Asin: B0CCHXX1Z9 | Ean: 0705252404599 | UPC: 705252404599
⚡【Logic Io Port Voltage】：3.3V(Ttl).
💎【More Information】：Please Check The Dimensional And Parametric Drawings.
⚡【Module Interface】：4-Wire Spi Interface.
⚡【Vcc Supply Voltage】：3.3V~5V.
Features
- Touch Panel Type Resistive Touch Screens
- VCC Supply Voltage 3.3V~5V
- Logic IO Port Voltage 3.3V(TTL)
- Module Interface 4-wire SPI interface
- More information Please check the dimensional and parametric drawings
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #9
HiLetgo 2.4" ILI9341 240X320 TFT LCD Display with Touch Panel LCD for Arduino UNO MEGA2560
Asin: B0722DPHN6 | Model: 3-01-1292 | PartNumber: 3-01-1292
Colorful, 18-Bit 262,000 Different Shades.
8 Bit Digital Interface, Plus 4 Control Lines.
4-Wire Resistive Touchscreen.
Bright, 4 White-Led Backlight, On By Default But You Can Connect The Transistor To A Digital Pin For Backlight Control.
Features
- 2.4" diagonal LCD TFT Touch Panel display
- Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control
- Colorful, 18-bit 262,000 different shades
- 4-wire resistive touchscreen
- 8 bit digital interface, plus 4 control lines
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #10
Hosyond 2.8 inch 240x320 IPS Capacitive Touch Screen SPI Serial ILI9341V Driver LCD Display Module for Arduino R3/Mega2560
Asin: B0CMGF4Q68 | Ean: 0741421390485 | UPC: 741421390485
On-Board Level Conversion Circuit, Compatible With 5V And 3.3V Mcus. Adopt 4-Wire Spi Serial Bus To Save I/O Pins..
Provide Rich Sample Learning Programs (Esp32/Stm32/Arduino R3&Mega2560/C51/Ch32), Provide Underlying Driver Technical Support, And Update The Information Online..
The Input Supports 2.54 Pin Header Interface And Fpc Extension Interface, And Comes With A Micro Tf Card Slot For Easy Storage Expansion..
Upgraded To Use Ips Full-Viewing Panel, 240X320 Resolution, 280Cd/M2 Brightness And Up To 262K Rgb Colors To Ensure Excellent Display Effects..
Features
- 2.8-inch color screen, Newly upgraded to a capacitive touch panel, the touch is more sensitive and precise compared to the resistive screen.
- Upgraded to use IPS full-viewing panel, 240x320 resolution, 280cd/m2 brightness and up to 262K RGB colors to ensure excellent display effects.
- On-board level conversion circuit, compatible with 5V and 3.3V MCUs. Adopt 4-wire SPI serial bus to save I/O pins.
- The input supports 2.54 pin header interface and FPC extension interface, and comes with a micro TF card slot for easy storage expansion.
- Provide rich sample learning programs (ESP32/STM32/Arduino R3&Mega2560/C51/CH32), provide underlying driver technical support, and update the information online.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Dimensions: 0.50 x 3.38 x 1.97 inches | Weight: 0.20 pounds
See On Amazon #11
MakerFocus TFT LCD Screen Display 1.3inch TFT LCD Module, 240x240 IPS 65K Full Color 3.3V with SPI Interface ST7789 IC Driver, 51 STM32 Ar duino Routines for DIY
Asin: B07P9X3L7M | Model: OQDK241413N5I8NU | PartNumber: OQDK241413N5I8NU | Ean: 0673400165084 | UPC: 673400165084
Working Voltage:3.3V; Working Temperature: -20-70℃.
Viewing Direction: Ips; Display Area Size: 23.4*23.4Mm; Tft Module Size: 27.78* 39.22Mm.
Interface: Spi Interface; Ic Driver: St7789.
Dot Size: 240*240 (There Are Two Display Way: Horizontal Display And Vertical Display, You Can Adjust The Display Direction.).
Features
- 1.3inch TFT LCD Screen Display Module:The TFT display provides a semiconductor switch for each pixel and each pixel is directly controlled by pulse. Therefore, each node is relatively independent and can be continuously controlled, which not only improves the response speed of the display, but also can be accurately controlled
- Dot Size: 240*240 (There are two display way: horizontal display and vertical display, you can adjust the display direction.)
- Working Voltage:3.3V; Working temperature: -20-70
- Interface: SPI Interface; IC Driver: ST7789
- Viewing direction: IPS; Display area Size: 23.4*23.4mm; TFT Module Size: 27.78* 39.22mm
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.39 x 1.06 x 1.54 inches | Weight: 0.02 pounds
See On Amazon #12
XIITIA 2pcs 2.8" SPI TFT LCD Display Touch Panel ILI9341 240x320 TFT LCD Touch Screen Shield 5V/3.3V STM32 Display Module SPI Serial with Touch Pen
Asin: B0CJHTMPXF | Ean: 0687117729309 | UPC: 687117729309
★Compatible With Arduino R3 Controller Board, Which Will Improve Your Project Operations..
★Spi Serial, Built-In Ili9341 Driver Ic And Power Supply Ic..
★Designed With A Sd Card Socket On The Back..
★With Touch Pen Inside, Support Touch Screen Function, More Easily To Use..
Features
- Display Area: 43.2(W)X57.6(H)mm
- With touch pen inside, support touch screen function, more easily to use.
- Compatible with arduino r3 controller board, which will improve your project operations.
- Designed with a SD card socket on the back.
- SPI serial, built-in ILI9341 driver IC and power supply IC.
- See more on Amazon...
Brand: XIITIA | Manufacturer: XIITIA
Dimensions: 0.75 x 4.50 x 3.46 inches
See On Amazon #13
Bicool 2.4inch LCD Display Module 65K RGB Colors, ILI9341 2.4" TFT 240 320 Resolution, SPI Interface Compatible with Arduino/Raspberry Pi/STM32
Asin: B08JKCDHRW | Model: 2.4inch Display LCD Module-F | PartNumber: 2.4inch Display LCD Module-F | Ean: 0779172279711 | UPC: 779172279711
Display Panel:Tft . Operating Voltage:3.3V. Display Size:36.72 × 48.96Mm.
Comes With Development Resources (Examples For Raspberry Pi/Arduino/Stm32).
Pixel Size:0.153 × 0.153Mm. Dimensions :70.50 × 43.30Mm..
4-Wire Spi Interface,Embedded Ili9341 Driver, Using Spi Bus.Supports Controller Boards Like Raspberry Pi/Arduino/Stm32.
Features
- 2.4" LCD Display Module, 65K RGB Colors, 240 320 Resolution, 65K RGB colors, clear and colorful displaying effect
- 4-wire SPI Interface,embedded ILI9341 driver, using SPI bus.Supports controller boards like Raspberry Pi/Arduino/STM32
- Display Panel:TFT . Operating voltage:3.3V. Display size:36.72 48.96mm
- Pixel size:0.153 0.153mm. Dimensions :70.50 43.30mm.
- Comes with development resources (examples for Raspberry Pi/Arduino/STM32)
- See more on Amazon...
Brand: Bicool | Manufacturer: Bicool
See On Amazon #14
Hosyond 2.4 Inches TFT LCD Touch Screen Shield Display Module 320x240 SPI Serial ILI9341 with Touch Pen Compatible with Arduino R3/Mega2560 Development Board
Asin: B09XHRKFMM | Ean: 0761325160717 | UPC: 761325160717
Compatible With Arduino R3 Controller Board,Which Will Improve Your Project Operations..
Spi Serial,Built-In Ili9341driver Ic And Power Supply Ic..
There Is A Sd Card Socket On The Back Of This Screen..
Support Touch Screen Function, With Touch Pen Inside That You Can Use It More Easily..
Features
- 2.4 inches 320x240 pixels RGB colorful display lcd screen.
- Support touch screen function, with touch pen inside that you can use it more easily.
- compatible with Arduino R3 controller board,which will improve your project operations.
- there is a SD card socket on the back of this screen.
- SPI Serial,built-in ILI9341driver IC and power supply IC.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Warranty: NO
See On Amazon #15
BIGTREETECH TFT35 SPI V2.1 Touch Screen Display 3.5 Inches Smart Controller Panel Use with CB1 + BTT Manta E3EZ / Manta M8P / Manta M4P / Manta M5P to Run Klipper
Asin: B0BRZ4RL1P
🍀【Reserved Extension Ports】Designed With Xh2.54 Terminal, Which Can Communicate With The Board Through The Terminal..
🍀【Quality Warranty】We Offer A 12 Months Quality Warranty Period For Our Products. If You Have Any Question And Feedback Please Feel Free To Contact Us, Our Professional Technical Team Will Try Best To Help You..
🍀【Compatible With Btt Cb1】Tft35 Spi Touch Screen Is Compatible With All Versions Of Btt Cb1 Core Board. It Can Directly Use With Cb1 V2.0 And Cb1 V2.2, And Need To Match Up With Io2can Expansion Module When Used With Cb1 V2.1..
🍀【Responsive & Easy Operation】Tft35 Spi Is A 3.5 Inch Full-Color Screen With Ultra Clear Display And Responsive Touch. It Is Connected To The Motherboard Through The Fpc Cable, Simple And Convenient To Use, Greatly Improving Your Klipper Experience..
Features
- TFT35 SPI Touch Screen BIGTREETECH TFT35 SPI display is a resistive touch screen that controlled by the motherboard chip. Its LCD display is supported by SPI and touch function is supported by I2C. Appearance size: 98*56mm, power input : 5V.
- Responsive & Easy Operation TFT35 SPI is a 3.5 inch full-color screen with ultra clear display and responsive touch. It is connected to the motherboard through the FPC cable, simple and convenient to use, greatly improving your klipper experience.
- Reserved Extension Ports Designed with XH2.54 terminal, which can communicate with the board through the terminal.
- Compatible with BTT CB1 TFT35 SPI touch screen is compatible with all versions of BTT CB1 core board. It can directly use with CB1 V2.0 and CB1 V2.2, and need to match up with IO2CAN expansion module when used with CB1 V2.1.
- Quality Warranty We offer a 12 months quality warranty period for our products. If you have any question and feedback please feel free to contact us, our professional technical team will try best to help you.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #16
2.8" TFT LCD Display Touch Screen Module 2.8 Inch SPI Serial ILI9341 Touch Panel LCD 320X240 5V 3.3V with Touch Pen
Asin: B0BZGXY57J | Ean: 0687117716743 | UPC: 687117716743
Easy To Expand The Experiment With Sd Card Slot.
320X240 Resolution, Optional Touch Function.
Support Touch Screen Function With Touch Pen.
Using The Spi Serial Bus, It Only Takes A Few Ios To Illuminate The Display.
Features
- 2.8-inch color screen,support 65K color display,display rich colors
- Using the SPI serial bus, it only takes a few IOs to illuminate the display
- Easy to expand the experiment with SD card slot
- Support touch screen function with touch pen
- 320X240 resolution, optional touch function
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
Warranty: No
See On Amazon #17
EC Buying 4.0inch LCD Screen Module TFT LCD Touch Display Touch Screen pens Color Screen Module TFT 4.0 Inch SPI Serial 480 x 320 HD Electronic Screen Driver Accessories
Asin: B0BXDNQTC5
Using The Spi Serial Bus, It Only Takes A Few Ios To Illuminate The Display.
Provide A Rich Sample Program.
Easy To Expand The Experiment With An Sd Card Slot.
480X320 Resolution With Optional Touch Function.
Features
- The 4.0-inch color screen supports 65K color display, displays rich colors
- 480X320 resolution with optional touch function
- Using the SPI serial bus, it only takes a few IOs to illuminate the display
- Easy to expand the experiment with an SD card slot
- Provide a rich sample program
- See more on Amazon...
Brand: EC Buying | Manufacturer: EC Buying
See On Amazon #18
Oumefar LCD Screen Module, 3.5inch TFT Display Module SPI Serial 480 x 320 ILI9488 HD Electronic Accessories with ILI9488 Driver Chip, Electronic Screen Driver Accessories
Asin: B08QYNMSZM | Ean: 9588085842568
【Multiple Functions】: The 3.5Inch Lcd Screen Module Can Be Used In Multiple Functions, And Can Be Used For Other Display Functions Through The Transmission Line. It Is Powerful And Can Bring You A Good Experience..
【Quality Assurance】: The 3.5Inch Lcd Screen Module Has Strict Quality Control And Quality Assurance. It Has Passed Multiple Tests And Has A High Safety Factor. It Can Be Purchased And Used With Confidence.
【Good Performance】: The 3.5Inch Lcd Screen Module Is Small In Size, Easy To Carry And Store, Easy To Use, Excellent Performance, Reliable Quality Assurance, And Excellent Details Can Meet Your Different Needs.
【Memory Card Slot】: The 3.5Inch Lcd Screen Module Has A Memory Card Slot, Large Storage Capacity, Easy To Expand The Experiment, Provides A Wealth Of Sample Programs,Which Is A Good Learning Tool For Children.
Features
- High Resolution : The 3.5inch LCD Screen Module has a resolution of 480X320 HD, several IOs can light up the display screen, the picture display is clear, the action playback is smooth, and the reliability is very high
- Memory Card Slot : The 3.5inch LCD Screen Module has a memory card slot, large storage capacity, easy to expand the experiment, provides a wealth of sample programs,which is a good learning tool for children
- Multiple Functions : The 3.5inch LCD Screen Module can be used in multiple functions, and can be used for other display functions through the transmission line. It is powerful and can bring you a good experience.
- Good Performance : The 3.5inch LCD Screen Module is small in size, easy to carry and store, easy to use, excellent performance, reliable quality assurance, and excellent details can meet your different needs
- Quality Assurance : The 3.5inch LCD Screen Module has strict quality control and quality assurance. It has passed multiple tests and has a high safety factor. It can be purchased and used with confidence
- See more on Amazon...
Brand: Oumefar | Manufacturer: Oumefar
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #19
FainWan ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 Module with PCB 5V/3.3V STM32 with Touch
Asin: B09PJZKPR4 | Model: ILI9341-2.8-with Touch | PartNumber: ILI9341-2.8-with Touch | Ean: 0768571605702 | UPC: 768571605702
With Pcb Plate (Including Power Supply Ic, Sd), Compatible With 5110 Interface.
Package Included: 1*240X320 Resolution 2.8" Spi Tft Lcd Display Touch Panel.
Driver Ic: Ili9341.
New 2.8-Inch Serial Color Lcd Module With Touch With At Least 9 Io Drivers Resolution 240*320.
Features
- Brand new and high quality
- New 2.8-inch serial color LCD module with touch with at least 9 IO drivers Resolution 240*320
- With PCB plate (including power supply IC, SD), compatible with 5110 interface
- Driver IC: ILI9341
- Package included: 1*240X320 Resolution 2.8 SPI TFT LCD Display Touch Panel
- See more on Amazon...
Brand: FainWan | Manufacturer: FainWan
See On Amazon
Looking For Something Else?
Search