Creality CR Touch Auto Bed Leveling Sensor Kit with Creality Ender 3 Motherboard 4.2.7 Kit for Ender 3 V2 /Ender 3 Neo/Ender 3/ Ender 3 Pro/Ender 5/Ender 3D Printer
Asin: B0B8SKJ227
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【✅Wide Application And Strong Compatibility】Equipped With A Variety Of Brackets, It Can Adapt To More 3D Printers.Compatible With Ender 3 V2/Ender 3/Ender 3 Pro/Ender 5//Ender 5S/Ender 5Pro And Cr-10 3D Printer.Compatible With All Printing Platform Materials Such As Pei Film Sheet , Stickers, Glass, Metal, Etc..
【❤️Serious Service】We Will Provide A Long-Term Warranty Service Of Up To 12Months,Strict Testing For All Components Before Delivery. If You Encounter Any Problems When Printing, Please Feel Free To Contact Us, Please Give Us A Chance To Solve The Problem For You..
【✅Multi-Point Detection, Intelligent Compensation】Cr Touch Performs Multi-Point Detection On The Printing Platform And Records The Height Data Of Each Detection Point. The Extension Length Is 0-6Mm, And The Repeat Positioning Accuracy Is 0.04Mm. The System Can Automatically Compensate The Printing Height Of Different Points To Achieve Automatic Leveling Function..
【✅Metal Probes Are More Durable】Cr Touch Is Upgraded To A Metal Probe, Which Is More Durable And Can Reduce The Wear Caused By Daily Use, Stable Quality, Reusable,Thus Greatly Increasing The Service Life Of The Probe..
【✅Simple Installation And Convenient Use】The Cr Touch Kit Contains 3 Different Mounting Brackets And Extension Cords. You Can Install It Easily. The Board Has Been Programmed With Ender 3 Firmware .For Ender 3 V2/ Ender 3 Pro/ Ender 3 Max/ Ender 5/ Ender 5 Pro, Please Update Firmware. Do Not Try Randomly..
【✅Main Control Chip Upgrade 】Ender 3 Motherboard V4.2.7 Main Control Chip Upgrade Adopts Stmicroelectronics G0 Series Mcu Stm32f103ret6,The Instructions Will Be Sent To The 3D Printer Faster And More Accurately..
Features
- Ender 3 Silent control board Motherboard V4.2.7 Onboard TMC2225 for ultra-quiet.is a good choice for Ender 3/ V2/ Pro upgrade, effectively reducing noise and optimizing the printing environment.
- Main control chip upgrade Ender 3 Motherboard V4.2.7 main control chip upgrade Adopts STMicroelectronics G0 series MCU STM32F103RET6,the instructions will be sent to the 3D printer faster and more accurately.
- Wide application and strong compatibility Equipped with a variety of brackets, it can adapt to more 3D printers.Compatible with Ender 3 v2/Ender 3/Ender 3 Pro/Ender 5//Ender 5s/Ender 5Pro and CR-10 3D Printer.Compatible with all printing platform materials such as PEI film Sheet , stickers, glass, metal, etc.
- Simple installation and convenient use The CR TOUCH kit contains 3 different mounting brackets and extension cords. You can install it easily. The board has been programmed with Ender 3 firmware .For Ender 3 v2/ Ender 3 pro/ Ender 3 Max/ Ender 5/ Ender 5 Pro, please update firmware. DO NOT TRY RANDOMLY.
- Multi-point detection, intelligent compensation CR Touch performs multi-point detection on the printing platform and records the height data of each detection point. The extension length is 0-6mm, and the repeat positioning accuracy is 0.04mm. The system can automatically compensate the printing height of different points to achieve automatic leveling function.
- Metal probes are more durable CR touch is upgraded to a metal probe, which is more durable and can reduce the wear caused by daily use, Stable quality, reusable,thus greatly increasing the service life of the probe.
- Serious service We will provide a long-term warranty service of up to 12months,Strict testing for all components before delivery. If you encounter any problems when printing, please feel free to contact us, please give us a chance to solve the problem for you.
- See more on Amazon...
Brand: Ickiya | Manufacturer: Ickiya
See On Amazon Similar To Creality CR Touch Auto Bed
#1
Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 235X235mm (1)
Asin: B07X3WBNPX
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Simple Installation & Universal: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
All New Functionality: Introducing The First Ever Removable, Magnetically Secured, Build Surface For Hassle Free Model Removal.It Is Recommended To Heat The Hot Bed For 2-3 Minutes Before Removing The Model With The Removal Tools..
Features
- ATTENTION BEFORE USE Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.08 x 9.25 x 9.25 Inches | Weight: 0.55 pounds
See On Amazon #2
Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function DIY 3D Printers Printing Size 8.66x8.66x9.84 inch
Asin: B07BR3F9N6 | Model: Ender 3 | PartNumber: Ender 3 | Ean: 0796862079093, 0649910035087, 0680577986473, 0193621889328 | UPC: 649910035087, 680577986473, 796862079093, 193621889328
Advanced Extruder Technology: Upgraded Extruder Greatly Reduces Plugging Risk And Bad Extrustion; V-Shape With Pom Wheels Make It Move Noiseless, Smoothly And Durable..
Strict Test: Strict Testing For Key Components Before Delivery And Life-Time Technical Supports Available..
Safety Protected Power Supply: Only Needs 5 Minutes For Hot Bed To Reach 100 Degree..
Easy And Qucik Assembly: It Comes With Several Assembled Parts, You Only Need About 2 Hours To Assemble 20 Nuts Well..
Features
- Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
- Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
- Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 100 degree.
- Strict Test: Strict testing for key components before delivery and life-time technical supports available.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 18.31 x 16.14 x 16.54 inches | Weight: 15.43 Pounds
Warranty: 1 year
See On Amazon #3
Creality CR Touch Auto Bed Leveling Sensor Kit for 3D Printer with Metal Push Pin for Ender 3/Ender 3 V2/Ender 3 Pro/3 Max/Ender 5 pro/CR-10 with 32 Bit V4.2.2/V4.2.7 Mainboard
Asin: B0995H2X92 | Model: 3DZDTPZHTJ | PartNumber: 3DZDTPZHTJ
Features
- Creality 3D Printer Auto Bed Leveling Kit - The Creality cr touch auto bed leveling kit fulfilled simple structure and high precision. Performs multi-point detection on the printing platform and records the height of each detection point. Stable quality, long service life, and can be reused more than 100,000 times.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 3.93 x 2.48 x 1.61 inches | Weight: 0.26 pounds
See On Amazon #4
Creality Ender 3 V3 SE 3D Printer, 250mm/s Faster Printing Speed CR Touch Auto Leveling Sprite Direct Extruder Dual Z-Axis Auto Filament Loading Ender 3D Printer Print Size 8.66x8.66x9.84 inch
Asin: B0CNWFDBZ6 | Model: Upgrade Creality Ender-3 V3 SE | PartNumber: Upgrade Creality Ender-3 V3 SE
【Worry-Free Cr Touch Auto Leveling & Strain Sensor】Ender-3 V3 Se 3D Printer Features A Cr Touch Sensor For Auto Leveling And A Strain Sensor For Auto Z-Offset. Just Lay Back And Enjoy The Print Success, There Is No Need To Participate Manually Throughout The Process, Making Leveling Much Easier..
【Auto Filament Loading & Unloading】Ender 3 V3 Se Supports Automatic Loading And Unloading Filament Function. Tap "Extrude", And The Filament Will Flow Out Of The Nozzle Smoothly. Tap "Retract", And The Filament Will Exit Quickly. So, It Is Effortless To Replace The Filament..
【Creality Official Support Service】Creality Provides 12-Month After-Sales Service For The Creality Ender-3 V3 Se 3D Printers. If You Have Any Question Or Need Support About The Product, Please Contact Me Via Amazon, We Will Respond With 24 Hours..
【Quick Assembly & Easy To Use】Preassembly Has Solved Those Hassles And Worries Of Parts Assembly, It Only Takes 3 Steps To Complete The Assemble The Ender-3 V3 Se 3D Printer, It Only Takes 20 Minutes From The Unpacking To The First Printing..
【Stable Dual Z-Axis & Y-Axis Linear Shafts】High-Precision Dual Z-Axis Lead Screws Reduce Z Wobbling Effectively, Avoid Printing Deviation In Single-Axis Printing. The Y-Axis Features Two 8Mm Linear Shafts Made Of Strong And Wear-Proof Steel, Ensuring Printing Stability And Higher Printing Accuracy Over A Long-Lasting Time..
【Powerful"Sprite" Direct Extruder】Ender 3 V3 Se Is The Upgrade Of Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender 3 S1, Ender 3 S1 Pro Etc 3D Printer, Comes With The New Upgraded "Sprite" Full Metal Dual-Geardirect Extruder, More Powerful Extruder Pushing Force And Lightweight, The Extruder Realizes Smooth Feeding And Discharging Of Flaments Without Slipping. Works Extremely Well In Printing Flaments Like Pla, Tpu, Petg, Etc. And The Extruder Is Market-Proven For Its Reliability, As Over 500,000 Units Have Been Shipped Worldwide..
Features
- 250mm/s High-speed Printing Creality Ender 3 V3 SE 3d printer supports a maximum printing speed of 250mm/s, 2500mm/s acceleration.The speed has been greatly improved while maintaining the printing quality, saving 73% of the time compared with other printers.
- PowerfulSprite Direct Extruder Ender 3 V3 SE is the upgrade of ender 3, ender 3 v2, ender 3 pro, ender 3 neo, ender 3 v2 neo, ender 3 s1, ender 3 s1 pro etc 3d printer, comes with the new upgraded Sprite full metal dual-geardirect extruder, more powerful extruder pushing force and lightweight, the extruder realizes smooth feeding and discharging of flaments without slipping. Works extremely well in printing flaments like PLA, TPU, PETG, etc. And the extruder is market-proven for its reliability, as over 500,000 units have been shipped worldwide.
- Worry-free CR Touch Auto Leveling & Strain Sensor Ender-3 V3 SE 3d printer features a CR Touch sensor for auto leveling and a strain sensor for auto z-offset. Just lay back and enjoy the print success, there is no need to participate manually throughout the process, making leveling much easier.
- Stable Dual Z-axis & Y-axis Linear Shafts High-precision dual Z-axis lead screws reduce Z wobbling effectively, avoid printing deviation in single-axis printing. The Y-axis features two 8mm linear shafts made of strong and wear-proof steel, ensuring printing stability and higher printing accuracy over a long-lasting time.
- Creality Official Support Service Creality provides 12-month after-sales service for the creality ender-3 v3 se 3d printers. If you have any question or need support about the product, Please contact me via Amazon, we will respond with 24 hours.
- Quick Assembly & Easy to Use Preassembly has solved those hassles and worries of parts assembly, It only takes 3 steps to complete the assemble the ender-3 v3 se 3d printer, it only takes 20 minutes from the unpacking to the first printing.
- Auto Filament Loading & Unloading Ender 3 V3 SE supports automatic loading and unloading filament function. Tap Extrude, and the filament will flow out of the nozzle smoothly. Tap Retract, and the filament will exit quickly. So, it is effortless to replace the filament.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 15.00 x 22.00 x 9.00 Inches | Weight: 15.60 Pounds
Warranty: 1 year warranty
See On Amazon #5
Creality CR Touch Auto Leveling Kit, 3D Printer Bed Auto Leveling Sensor Kit for Ender 3/ Ender 3 Pro/Ender 3 V2/ Ender 3 Max/Ender 5/ and CR 10 with 32 Bit V4.2.2/V4.2.7 Mainboard
Asin: B09DVYZSYJ | Model: CRTOUCH | PartNumber: CRTOUCH
【Independent Research And Development Stable Function】Cr Touch Is A Creality 3D Research Institute Self-Developed 3D Printer Platform Leveling Solution Based On Hundreds Of Millions Of User Data Used By The Creators. Compared With The Traditional Automatic Leveling , It Is Compatible With More 3D Printer Platforms, More Stable And Cose-Effective. With Stable Quality And Long Service Life, It Can Be Reused For More Than 100,000 Times..
【Strong Compatibility】Creality Cr Touch Auto Leveling Kit Compatible With Pei / Sticker / Glass / Metal Platform..
【Package Include】1*Cr Touch Auto Leveling Sensor, 5*0.4Mm Nozzle, 3*Moounting Brackets, 1*Installation Guide, 3*Tie And 4*Screw.
【Multi-Point Detection Smart Compensation】Cr Touch Performs Multi-Point Detaction On The Printing Platform And Records The Heigh Of Each Detaction Point. The System Builds A Virtual Plane Based On The Height Of Each Point And Calculates The Tilt Angle Between The Nozzle And The Platform To Automatically Compensates For Different Points..
【About Reflash The Firmware】1. Download The Corresponding Firmware From The Creality Official Website. 2. Copy It To The Sd Card. 3. Rename It To 123.Bin, 4. Insert The Sd Card Into The Printer, 5. When The Power Is On, The Cr Touch Firmware Will Be Updated. (Note: Check Your Motherboard Version And Download The Correct Cr Touch Firmware)..
Features
- Wide Application This Creality cr touch auto-leveling kit is equipped with 3 mounting brackets and is only suitable for the following 3D printers with V4.4.2/V4.2.7 motherboards (Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/cr 10), other machines are not compatible. Please confirm your machine and motherboard version before purchasing.
- About Reflash the Firmware 1. Download the corresponding firmware from the Creality official website. 2. copy it to the SD card. 3. Rename it to 123.bin, 4. Insert the SD card into the printer, 5. When the power is on, the cr touch firmware will be updated. (Note: Check your motherboard version and download the correct CR touch firmware).
- Independent research and development Stable function CR Touch is a Creality 3D research institute self-developed 3D printer platform leveling solution based on hundreds of millions of user data used by the creators. Compared with the traditional automatic leveling , it is compatible with more 3D printer platforms, more stable and cose-effective. With stable quality and long service life, it can be reused for more than 100,000 times.
- Multi-point detection Smart compensation CR Touch performs multi-point detaction on the printing platform and records the heigh of each detaction point. The system builds a virtual plane based on the height of each point and calculates the tilt angle between the nozzle and the platform to automatically compensates for different points.
- Strong compatibility Creality CR Touch auto leveling kit Compatible with PEI / sticker / glass / metal platform.
- Package Include 1*CR Touch Auto Leveling Sensor, 5*0.4mm Nozzle, 3*Moounting brackets, 1*Installation Guide, 3*Tie and 4*Screw
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.29 Pounds
See On Amazon #6
Official Creality Ender 3 V2 Neo 3D Printer with CR Touch Auto Leveling PC Spring Steel Platform Full-Metal Extruder 95% Pre-Installed 3D Printers Resume Print and Model Preview 8.66*8.66*9.84 inch
Asin: B08BL41ZMY | Model: Ender 3 V2 Neo | PartNumber: Ender 3 V2 Neo | Ean: 8935672542577, 8935672542508, 8935672542539, 0735209618557 | UPC: 735209618557
3.Brand New 4.3 Inch Ui User Interface: The Upgraded Ui Adds A Model Preview Function, Making It Easier To Observe The Printing Shape And Progress For Customers. Which Is Convenient For You To Know About The Model Status. Also, It Supports Nine Languages For Different Customers Demand..
5.Silent Motherboard: The Mainboard Is 4.2.2 Version But It Is Silent Mainboard Which Is Different From Ender 3 Mainboard. This Ender-3 V2 Neo Equipped With Self-Developed Silent Motherboard, Which Has Stronger Anti-Interference, Faster And More Stable Motion Performance, Silent Printing And Low Decibel Operation, Create A Quiet Environment.The Extruder Is Upgraded To Full-Metal Extruder, Which Has Greater Extrusion Force And Is More Durable, Reducing The Risk Of Nozzle Blockage..
4.Pc Spring Steel Magnetic Build Plate: Different From Ender 3, Ender 3 Pro And Ender 3 V2, This New-Released Fdm 3D Printer Comes With A Removable Pc Spring Steel Magnetic Build Plate. The Innovative Printing Platform Is A Combination Of A Pc Coating, A Spring Steel Sheet And A Magnetic Sticker, Which Sticks To The Surface Immediately When Released. The Pc Coating Brings Good Adhesion For Filament, And The Finished Models Can Be Easily Removed By Bending The Print Sheet..
2.Cr Touch Auto Bed Leveling: Upgraded Cr Touch 16-Point Automatic Bed Leveling Technology Saves You In The Trouble Of Manual Leveling. Easy To Use, The Intelligent Leveling System Can Automatically Compensate For The Printing Height Of Different Points Of The Hot Bed. It Saves Much More Time For Customers In Long-Time Leveling Adjustment, Quickly Finish The Leveling Process..
Features
- 1.Easy Assembly: Compared to Ender-3 V2, this Ender-3 V2 Neo printer is pre-installed, and the assembly requires only 3 steps. Friendly enough to users and beginners in assembly process, which will save much time. It is convenient for customers to install it in quick way, more efficient.
- 2.CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you in the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the hot bed. It saves much more time for customers in long-time leveling adjustment, quickly finish the leveling process.
- 3.Brand New 4.3 Inch UI User Interface: The upgraded UI adds a model preview function, making it easier to observe the printing shape and progress for customers. Which is convenient for you to know about the model status. Also, it supports nine languages for different customers demand.
- 4.PC spring steel magnetic build plate: Different from ender 3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC spring steel magnetic build plate. The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion for filament, and the finished models can be easily removed by bending the print sheet.
- 5.Silent Motherboard: The mainboard is 4.2.2 version but it is silent mainboard which is different from ender 3 mainboard. This Ender-3 V2 Neo equipped with self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation, create a quiet environment.The extruder is upgraded to full-metal extruder, which has greater extrusion force and is more durable, reducing the risk of nozzle blockage.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 18.58 x 17.24 x 16.70 inches | Weight: 17.20 pounds
Warranty: 1 year
See On Amazon #7
Creality Official Ender 3 S1 Pro Original Build Plate 235x235mm Magnetic Bed Plate Texture Removable PEI Sheet for Ender 3 V3 SE/Ender 3 V3 KE/Ender 3 S1/Ender 3/Ender 5 S1/Ender 5 Pro, K1, CR-10 SE
Asin: B0C4P1SP6F
【Wide Compatibility】- This Magnetic Build Plate Is Applicable To Most Materials Such As Pla, Abs, Asa, Petg, Tpu, Pc, Pa, Etc. It Is Compatible With Creality K1, Ender 3 V3 Se, Ender 3 V3 Ke, Ender 3 S1, Ender 3 S1 Pro, Ender 3, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 S1, Cr-10 Se And So On..
【Professional Support】- To Ensure Your Pleasant Shopping Experience, Creality Has A Professional Customer Service Team To Solve Your Problems. If You Have Any Problems, Please Do Not Hesitate To Contact Us. We Will Provide Friendly And Fast Customer Service To Solve Your Problem Within 24 Hours..
【Easy Model Removal】- Without Using Other Tools, You Can Easy To Remove The Printed Model By Just Bending The Pei Steel Plate Multiple Times After Printing. The Pei Sheet Has Excellent Elasticity And It Is Not Deformed After Repeated Bending..
【Precise Positioning】- Dual Handles And Positioning Hole Design Make The 3D Printer Build Plate Easier To Install And Use. Furthermore, This Ender 3 S1 Build Plate Has A Strong Magnetic Force, And It Is Not Easy To Dislocate After Installation. Strong Magnetic Stickers Help It Maintain High Adhesion At High Temperatures, Which Ensures Better Print Stability..
Features
- Premium PEI Materials - With heat and wear-resistant, frosted PEI powder coating, the PEI build plate surface is not easy to get scratched or damaged. This Ender 3 S1 Pro bed plate has high adhesion to prevent the model from warping while printing, whether at high or low temperatures.
- Precise Positioning - Dual handles and positioning hole design make the 3D printer build plate easier to install and use. Furthermore, this Ender 3 S1 build plate has a strong magnetic force, and it is not easy to dislocate after installation. Strong magnetic stickers help it maintain high adhesion at high temperatures, which ensures better print stability.
- Wide Compatibility - This magnetic build plate is applicable to most materials such as PLA, ABS, ASA, PETG, TPU, PC, PA, etc. It is compatible with Creality K1, Ender 3 V3 SE, Ender 3 V3 KE, Ender 3 S1, Ender 3 S1 Pro, Ender 3, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 S1, CR-10 SE and so on.
- Easy Model Removal - Without using other tools, You can easy to remove the printed model by just bending the PEI steel plate multiple times after printing. The PEI sheet has excellent elasticity and it is not deformed after repeated bending.
- Professional Support - To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems. If you have any problems, please do not hesitate to contact us. We will provide friendly and fast customer service to solve your problem within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #8
Creality Original Ultra-Flexible Removable Magnetic Build Surface Heated Bed Cover for Ender 3 V2 Neo/ pro/ S1/Ender 5 3D Printer 235X235MM
Asin: B07HNWSMXY | Model: Ender 3-Magnetic | PartNumber: Ender 3-Magnetic | Ean: 0667797511685 | UPC: 667797511685
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
Universal: Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Simple Installation: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate..
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Features
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
- UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Ender | Manufacturer: Creality 3D
See On Amazon #9
3PCS Creality Original Heat Bed Platform Sticker Sheet, Hot Bed Build Surface Tape 235x235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/5
Asin: B07FQWTZ3Y | Ean: 0649910300666 | UPC: 649910300666
Compatible With Abs, Pla, Hips, And Another Filament. Works With All Fdm Printer Models..
Durable Construction Allows For Multiple Uses With Either The Same Or Different Filament Materials..
Single Sheet Design Installs More Quickly And With Fewer Bubbles Than Tape Or Films..
Build Sheet Adheres To The Hot Bed To Help The Filament Stuck During Printing, While Also Helping Remove The Printed Model Afterward..
Features
- Size: 235mm x 235mm.
- Build sheet adheres to the hot bed to help the filament stuck during printing, while also helping remove the printed model afterward.
- Compatible with ABS, PLA, HIPS, and another filament. Works with all FDM printer models.
- Single sheet design installs more quickly and with fewer bubbles than tape or films.
- Durable construction allows for multiple uses with either the same or different filament materials.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.30 x 9.25 x 9.25 Inches
See On Amazon #10
Creality Official CR Touch Auto Leveling Kit, 3D Printer Auto Bed Leveling Sensor Kit for Ender 3 / Ender 3 V2 / Ender 3 Pro/Ender 3 Max/Ender 5 / CR-10 Printers with 32 Bit V4.2.2 / V4.2.7 Mainboard
Asin: B09CYKMYQS
♡【Easy To Install And Use】Download The Cr Touch Program And Copy It To The Tf/Sd Card From The Creality Official Website, Directly Insert Into The 3D Printer Card Slot To Update The Program. You Don’T Need To Use An Isp Burner, Which Is More Convenient To Use..
【After-Sales Service】Our Package Was Included 1 Set Of Auto-Leveling Kit And A Replacement Probe. If You Encounter Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us Through “ Ask A Question ", Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
♡【Widely Application】Cr Touch Works For Ender 3 / Ender 3 V2 / Ender 3 Pro/ Ender 3 Max / Ender 5 / Cr-10 3D Printers With 32 Bit V4.2.2 / V4.2.7 Mainboard..
♡【Strong Compatibility】Compatible With Traditional Automatic Leveling, It Is Compatible With More 3D Printer Platforms, More Stable And Cost-Effective. Compatible With Pei /Sticker Bed/Glass Bed/Metal Bed And More 3D Printing Platform Materials..
Features
- Perfect Design CR Touch auto bed leveling sensor fulfilled simple structure and high precision. Performs multi-point detection on the printing platform and records the height of each detection point. Stable quality, long service life, and can be reused more than 100,000 times.
- Strong compatibility Compatible with traditional automatic leveling, it is compatible with more 3D printer platforms, more stable and cost-effective. Compatible with PEI /sticker bed/glass bed/metal bed and more 3D printing platform materials.
- Easy to Install and Use Download the CR Touch program and copy it to the TF/SD card from the Creality official website, directly insert into the 3D printer card slot to update the program. You don t need to use an ISP burner, which is more convenient to use.
- Widely Application CR Touch works for Ender 3 / Ender 3 V2 / Ender 3 Pro/ Ender 3 Max / Ender 5 / CR-10 3D Printers with 32 Bit V4.2.2 / V4.2.7 Mainboard.
- After-sales Service Our package was included 1 set of auto-leveling Kit and a replacement probe. If you encounter unsolvable problems during installation and use, please feel free to contact us through Ask a question , our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #11
Creality Ender 3 Max Neo 3D Printer, CR Touch Auto Leveling Dual Z-Axis Full-Metal Extruder Silent Mainboard Filament Sensor Ender 3D Printer Large Print Size 11.8x11.8x12.6in
Asin: B0BL3WHSL9 | Model: Ender-3 Max Neo | PartNumber: Ender-3 Max Neo
【High-Precision Dual Z-Axis】Creality Ender 3 Max Neo Perfect Coordination Among Dual Z-Axes, Timing Belt And Dual Motors Guarantees The Stability And Higher Printing Precision. Effectively Avoid Printing Deviation In Single-Axis Printing And Reduces The Possibility Of Lines And Bulges On Your Side Print..
【Creality Official Support Service】Creality Provides 24/7 Customer Service And 12-Month After-Sales Service For The Creality 3D Printer. If You Have Any Question Or Need Support About The Product, Please Contact Us Via Amazon “Ask A Question”, We Will Respond With 24 Hours..
【Power Loss Recovery & Filament Sensor】The 350W High-Quality Built-In Power Supply Is More Secure And Reliable, Improving The Stability And The Sense Of Integration. The Resume Printing Function Can Accurately Record The Data And Restart The Print From Where It's Left Off, No Need To Worry About Sudden Power Failure. A Filament Sensor Is Equipped To Detect The Sufficiency Of Consumables, Avoiding Wasting And Enhancing The Success Rate..
【3 Steps Assembly & Color Knob Screen】96% Of The Printer Body Is Pre-Installed, Preassembly Has Solved Those Hassles And Worries Of Parts Assembly. Start Your Print With Just 3 Steps. The 4.3-Inch Colour Knob Screen Is An Energy Saver And Will Dim Out In 4 Minutes Without Operation. Optimized With Icons, The Ui Is More Vivid..
【Full-Metal Extruder & Get Rid Of Noisiness】The Full-Metal Bowden Extruder Is More Durable And Has Greater Extrusion Force, It Is Guaranteed Smooth Infeed And Outfeed, Reducing The Risk Of Nozzle Blockage. Equipped With A 32-Bit Silent Mainboard, The Noise Exposure Is Lower Than 50Db, Greatly Reducing Noise To Let You Enjoy Your Printing..
【Cr Touch Automatic Leveling】Ender 3 Max Neo 3D Printer Is Equipped With Cr Touch Sensor, Which Can Improves The Efficiency By Automatically Measuring And Adjusting The 25-Point Print Height On The Heat Bed, Making Leveling Much Easier..
Features
- Larger Build Volume Compare ender 3, ender 3 v2, ender 3 pro, ender 3 v3 se, ender 3 v3 ke 3d printer. The Ender 3 Max Neo's build volume of 300*300*320mm allows the printing of both large models and small parts, or several small models on a large build surface at the same time, greatly increasing efficiency and offering more creative possibilities.
- CR Touch Automatic Leveling Ender 3 Max Neo 3D printer is equipped with CR Touch sensor, which can improves the efficiency by automatically measuring and adjusting the 25-point print height on the heat bed, making leveling much easier.
- High-precision Dual Z-Axis Creality ender 3 max neo perfect coordination among dual Z-axes, timing belt and dual motors guarantees the stability and higher printing precision. Effectively avoid printing deviation in single-axis printing and reduces the possibility of lines and bulges on your side print.
- Full-metal Extruder & Get Rid of Noisiness The full-metal bowden extruder is more durable and has greater extrusion force, it is guaranteed smooth infeed and outfeed, reducing the risk of nozzle blockage. Equipped with a 32-bit silent mainboard, the noise exposure is lower than 50dB, greatly reducing noise to let you enjoy your printing.
- Power Loss Recovery & Filament Sensor The 350W high-quality built-in power supply is more secure and reliable, improving the stability and the sense of integration. The resume printing function can accurately record the data and restart the print from where it's left off, no need to worry about sudden power failure. A filament sensor is equipped to detect the sufficiency of consumables, avoiding wasting and enhancing the success rate.
- 3 Steps Assembly & Color Knob Screen 96% of the printer body is pre-installed, preassembly has solved those hassles and worries of parts assembly. Start your print with just 3 steps. The 4.3-inch colour knob screen is an energy saver and will dim out in 4 minutes without operation. Optimized with icons, the UI is more vivid.
- Creality Official Support Service Creality provides 24/7 customer service and 12-month after-sales service for the creality 3d printer. If you have any question or need support about the product, Please contact us via Amazon Ask a question , we will respond with 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 23.20 x 20.30 x 22.90 inches | Weight: 22.70 pounds
Warranty: 1 Year
See On Amazon #12
Creality Ender 3 V3 SE 3D Printer, 250mm/s CR Touch Auto Leveling FDM 3D Printer with Sprite Direct Extruder, Dual Z-axis & Y-axis, Auto-Load Filament, Print Size 8.66x8.66x9.84 inch
Asin: B0CRR1HFZF | Model: Creality Ender 3 V3 SE | PartNumber: Creality Ender 3 V3 SE
🤗 𝐒𝐏𝐑𝐈𝐓𝐄 𝐄𝐗𝐓𝐑𝐔𝐃𝐄𝐑 & 𝟑𝟐-𝐁𝐈𝐓 𝐌𝐀𝐈𝐍𝐁𝐎𝐀𝐑𝐃 - The Market-Proven “Sprite” Direct Drive Extruder Of Ender 3 V3 Se 3D Printer Ensures Smooth And Consistent Feeding Of Pla, Petg, And Also Flexible Tpu, Bringing More Possibilities. The 32-Bit Silent Mainboard Uses An Advanced Stepper Motor Drive To Control All Axes More Precisely For Less Operation Noise..
🤗 𝐄𝐀𝐒𝐘 𝐌𝐎𝐃𝐄𝐋 𝐑𝐄𝐌𝐎𝐕𝐀𝐋 𝐀𝐍𝐃 𝐌𝐎𝐑𝐄 - Ender 3 V3 Se 3D Printer Takes Up Less Space But Brings An Ample Build Volume. The Pc Spring Steel Build Plate Is Sticky And Flexible, Making It Easy To Remove The Printed Models By Bending It Slightly. Thanks To The Power Loss Recovery Function, It Can Resume Printing After An Unexpected Power Failure, Avoiding Filament And Time Waste..
🤗 𝐀𝐅𝐓𝐄𝐑-𝐒𝐀𝐋𝐄𝐒 𝐒𝐔𝐏𝐏𝐎𝐑𝐓 - Creality Provides A 12-Month After-Sales Service For All 3D Printers And A 3-Month Service For Wearing Parts, Such As The Nozzle Kit, Timing Belt Kit, And Build Plate. Feel Free To Contact Us Anytime If You Need!.
🤗 𝐀𝐔𝐓𝐎 𝐅𝐈𝐋𝐀𝐌𝐄𝐍𝐓 𝐋𝐎𝐀𝐃𝐈𝐍𝐆 & 𝐔𝐍𝐋𝐎𝐀𝐃𝐈𝐍𝐆 - Ender 3 V3 Se Supports Automatic Loading And Unloading Filament Function. Tap "Extrude", And The Filament Will Flow Out Of The Nozzle Smoothly. Tap "Retract", And The Filament Will Exit Quickly. So, It Is Effortless To Replace The Filament..
🤗 𝐘-𝐀𝐗𝐈𝐒 𝐋𝐈𝐍𝐄𝐀𝐑 𝐒𝐇𝐀𝐅𝐓𝐒 & 𝐃𝐔𝐀𝐋 𝐙-𝐀𝐗𝐈𝐒 - The Rigid Dual Z-Axis Lead Screws Reduce Z Wobbling Effectively. The Y-Axis Features Two 8Mm Linear Shafts Made Of Strong And Wear-Proof Steel, Which Underpins A Steady And Accurate Motion Of The Build Platform For A Lasting Time..
🤗 𝐂𝐑 𝐓𝐨𝐮𝐜𝐡 𝐀𝐔𝐓𝐎 𝐋𝐄𝐕𝐄𝐋𝐈𝐍𝐆 & 𝐒𝐓𝐑𝐀𝐍𝐈𝐍 𝐒𝐄𝐍𝐒𝐎𝐑 - Ender-3 V3 Se 3D Printer Features A Cr Touch Sensor For Auto Leveling And A Strain Sensor For Auto Z-Offset. Just Lay Back And Enjoy The Print Success, There Is No Need To Participate Manually Throughout The Process, Making Leveling Much Easier..
Note: If You Have Problems With Leveling, Please Check The Following Or Contact Us Directly For Help! First Layer Printing Non-Stick/Laminated Overall Non-Stick/Laminated: A. Clean The Platform Board, Preheat The Nozzle In Advance, Take Out The Consumables, Clean The Nozzle, And Re-Level It. B. You Can Apply Solid Glue On The Platform Plate Before Printing. C. Adjust Z-Axis Compensation According To The Printing Conditions Of The First Layer..
🤗 𝟑 𝐒𝐓𝐄𝐏𝐒 𝐓𝐎 𝐆𝐄𝐓 𝐒𝐓𝐀𝐑𝐓𝐄𝐃 - Creality Ender 3 V3 Se 3D Printer Is Easy To Put Together In 3 Steps. It Uses Cr Touch Sensor For Auto Leveling And A Strain Sensor For Auto Z Offset, Saving The Need For A Calibration Card Or Knob Screws. So Easy To Achieve A Perfect First Layer. Also, You Can Load Or Unload The Filament With One Tap. All Set Within Just 20 Minutes..
Features
- / & - Ender 3 V3 SE 3D printer can print at up to 250mm/s speed with 2500mm/s acceleration, allowing you to complete the models efficiently. The Optimized UI uses motion graphics to display the leveling process and other parameters, so you will know how the printer is doing at a glance.
- - Creality Ender 3 V3 SE 3D printer is easy to put together in 3 steps. It uses CR Touch sensor for auto leveling and a strain sensor for auto Z offset, saving the need for a calibration card or knob screws. So easy to achieve a perfect first layer. Also, you can load or unload the filament with one tap. All set within just 20 minutes.
- & - - The market-proven Sprite direct drive extruder of Ender 3 V3 SE 3D printer ensures smooth and consistent feeding of PLA, PETG, and also flexible TPU, bringing more possibilities. The 32-bit silent mainboard uses an advanced stepper motor drive to control all axes more precisely for less operation noise.
- & - Ender-3 V3 SE 3d printer features a CR Touch sensor for auto leveling and a strain sensor for auto z-offset. Just lay back and enjoy the print success, there is no need to participate manually throughout the process, making leveling much easier.
- & - Ender 3 V3 SE supports automatic loading and unloading filament function. Tap Extrude, and the filament will flow out of the nozzle smoothly. Tap Retract, and the filament will exit quickly. So, it is effortless to replace the filament.
- - & - - The rigid dual Z-axis lead screws reduce Z wobbling effectively. The Y-axis features two 8mm linear shafts made of strong and wear-proof steel, which underpins a steady and accurate motion of the build platform for a lasting time.
- - Ender 3 V3 SE 3D printer takes up less space but brings an ample build volume. The PC spring steel build plate is sticky and flexible, making it easy to remove the printed models by bending it slightly. Thanks to the power loss recovery function, it can resume printing after an unexpected power failure, avoiding filament and time waste.
- - - Creality provides a 12-month after-sales service for all 3d printers and a 3-month service for wearing parts, such as the nozzle kit, timing belt kit, and build plate. Feel free to contact us anytime if you need!
- Note: If you have problems with leveling, please check the following or contact us directly for help! First layer printing non-stick/laminated Overall non-stick/laminated: a. Clean the platform board, preheat the nozzle in advance, take out the consumables, clean the nozzle, and re-level it. b. You can apply solid glue on the platform plate before printing. c. Adjust Z-axis compensation according to the printing conditions of the first layer.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 19.29 x 13.74 x 14.33 Inches | Weight: 19.84 Pounds
Warranty: 1 year
See On Amazon #13
Creality CR Touch Auto Bed Leveling Sensor,Upgrade Noiseless Auto Bed Level Kit for 32 bit 4.2.2 &4.2.7 Motherboard,Fit for Ender 3/Ender 3 Pro/Ender 3 V2/ Ender 3 Max/Ender 5/Ender 5 Pro/CR 10
Asin: B09936TNJV | Ean: 0601549513862 | UPC: 601549513862
【Multi-Point Detection Smart Compensation】Cr Touch Performs Multi-Point Detaction On The Printing Platform And Records The Heigh Of Each Detaction Point. The System Builds A Virtual Plane Based On The Height Of Each Point And Calculates The Tilt Angle Between The Nozzle And The Platform To Automatically Compensates For Different Points..
【Creality Product】Durable And Strong Compatibility - The Cr Touch Kit Is Compatible With Pei/Sticker/Glass/Metal Bed. Ender 3 Auto Bed Leveling Kit Works Perfectly With Any Surface, Especially The Design Of The Metal Push Pin Allows For Longer Service Life..
【Easy To Install And Use】This Cr Touch Auto Leveling Kit Contains 3 Different Mounting Brackets And Extension Cords. Please Choose The Suitable Mounting Bracket For Your 3D Printer, Download The Cr Touch Firmware From Creality Official Website And Copy It To The Sd Card (Format It Before Use), Then Directly Insert It Into The Card Slot. The Firmware Will Be Updated After Powering On..
【Suitable For 32 Bit V4.2.2/V4.2.7 Mainboard】The Cr Touch Bed Leveling Kit Is Compatible With Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5//Ender 5S/Ender 5Pro And Cr-10 3D Printer..
Features
- Independent Development Creality CR Touch is upgraded to a metal probe with noise-reducing silicone ring. 360 transparent silicone protective shell makes CR Touch safer and more durable. Positioning accuracy 0.04mm, Automatic detection and leveling, can be reused for over 100,000 times.
- Suitable for 32 Bit V4.2.2/V4.2.7 Mainboard The CR Touch bed leveling kit is compatible with Creality Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5//Ender 5s/Ender 5Pro and CR-10 3D Printer.
- Multi-point detection Smart compensation CR Touch performs multi-point detaction on the printing platform and records the heigh of each detaction point. The system builds a virtual plane based on the height of each point and calculates the tilt angle between the nozzle and the platform to automatically compensates for different points.
- Easy to Install and Use This CR touch auto leveling kit contains 3 different mounting brackets and extension cords. Please choose the suitable mounting bracket for your 3d printer, download the CR Touch firmware from Creality official website and copy it to the SD card (format it before use), then directly insert it into the card slot. The firmware will be updated after powering on.
- Creality Product Durable and Strong Compatibility - The cr touch kit is compatible with PEI/sticker/glass/metal bed. Ender 3 auto bed leveling kit works perfectly with any surface, especially the design of the metal push pin allows for longer service life.
- See more on Amazon...
First Available: 11/20/2023
Brand: YOOPAI | Manufacturer: yoopai
Dimensions: 3.94 x 3.94 x 11.81 Inches
Warranty: 180day
See On Amazon #14
Creality Ender 3 V3 SE 3D Printer, 250mm/s Printing Speed, Sprite Direct Extruder CR Touch Auto Leveling Auto Z Offset Color Screen 220x220x250mm
Asin: B0CFVB2C8T | Model: Ender 3 V3 SE | PartNumber: Ender 3 V3 SE
【Fast Start-Up】From Assembly To Auto Leveling And Filament Loading, Get Your Printing Started Within Just 20 Minutes..
【Newer Model】Compare Ender 3 V3 Se 3D Printer With Creality Ender 3, Ender 3 Pro,Ender 3 V2, Ender 3 Neo, Ender 3 V2 Neo. The Ender-3 V3 Se Enhance The Overall User Experience And Printing Performance.Features With Its Dual Z-Axis,250Mm/S Higher Speed,Strong 8Mm Steel Linear Shafts, And A Sleek Compact Design, Etc..
【Uncompromised Stability】 Elevate Your Printing Experience With The Ender 3 V3 Se's Dual Z-Axis For Reduced Z-Wobbling, Combined With Robust 8Mm Steel Linear Shafts That Provide Long-Lasting And Steady Build Platform Support..
【Elegant & Compact】The Ender 3 V3 Se 3D Printer Boasts A Compact And Elegant Build, Featuring Neat X, Y, Z-Axis, Smooth T-Shaped Profiles, And Discreet Tensioners For A Visually Appealing Aesthetic..
【Sprite Direct Extruder,Highly Capable】The "Sprite" Extruder Of Ender-3 V3 Se Works Well With Pla, Petg, And Flexible Tpu, Unlocking Your Creative Potential.Backed By Market-Proven Reliability, With Over 500,000 Units* Shipped Worldwide..
【Auto Filament Loading And Unloading】Simply Tap "Extrude" For Smooth Filament Flow Or "Retract" For Quick Filament Removal, Making Filament Replacement A Breeze..
Features
- High-Speed Precision Experience swift and impressive prints with the Creality Ender 3 V3 SE 3D Printer's outstanding capabilities - Max Printing Speed: 250mm/s, Max Acceleration: 2500mm/s .
- Auto Filament Loading and Unloading Simply tap Extrude for smooth filament flow or Retract for quick filament removal, making filament replacement a breeze.
- Fast Start-Up From assembly to auto leveling and filament loading, get your printing started within just 20 minutes.
- Sprite Direct Extruder,Highly Capable The Sprite extruder of Ender-3 V3 SE works well with PLA, PETG, and flexible TPU, unlocking your creative potential.Backed by market-proven reliability, with over 500,000 units* shipped worldwide.
- Uncompromised Stability Elevate your printing experience with the Ender 3 V3 SE's dual Z-axis for reduced Z-wobbling, combined with robust 8mm steel linear shafts that provide long-lasting and steady build platform support.
- Elegant & Compact The Ender 3 V3 SE 3D Printer boasts a compact and elegant build, featuring neat X, Y, Z-axis, smooth T-shaped profiles, and discreet tensioners for a visually appealing aesthetic.
- Newer Model Compare Ender 3 V3 SE 3d printer with Creality Ender 3, Ender 3 Pro,Ender 3 V2, Ender 3 Neo, Ender 3 V2 neo. The Ender-3 V3 SE enhance the overall user experience and printing performance.Features with its Dual Z-axis,250mm/s higher speed,strong 8mm steel linear shafts, and a sleek compact design, etc.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 19.30 x 14.40 x 15.75 inches
Warranty: 1 year manufacture
See On Amazon #15
Official Creality Ender 3 V2 Neo 3D Printer, Upgrade from Ender 3 V2 with CR Touch Auto Leveling Kit, PC Steel Printing Platform, Metal Bowden Extruder for Beginner and Pro(220 * 220 * 250mm)
Asin: B0B56NMP11 | Model: / | PartNumber: /
【Upgrade Printing Platform】Different From Ender3, Ender 3 Pro And Ender 3 V2, This New-Released Fdm 3D Printer Comes With A Removable Pc Spring Steel Platform. The Innovative Printing Platform Is A Combination Of A Pc Coating, A Spring Steel Sheet And A Magnetic Sticker, Which Sticks To The Surface Immediately When Released. The Pc Coating Brings Good Adhesion And Printed Models Can Easily Be Removed By Bending The Print Sheet..
【After Sales Service】Creality Pays Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【Easy 3-Steps Installation】90% Factory Pre-Installed,It Only Takes 3 Steps To Complete The Installation Out Of The Box.Simple Operation And Avoid Various Problems Caused By Installation Errors..
【Upgrade Metal Bowden Extruder】 Different From Ender3, Ender 3 Pro And Ender 3 V2, This New-Released 3D Printer Comes With Metal Bowden Extruder, Which Is More Durable And Has More Extrusion Force Than Plastic Extruders.
Features
- Auto Bed Leveling Equipped with the accurate and reliable CR-Touch, featuring precision, stability and reduced cost. CR-Touch gathers the bed deviation data by touching multiple points in the bed and compensating for them accordingly,allowing for hassle-free bed leveling.
- Upgrade Metal Bowden Extruder Different from ender3, ender 3 pro and ender 3 v2, this new-released 3d printer comes with metal bowden extruder, which is more durable and has more extrusion force than plastic extruders
- Upgrade Printing Platform Different from ender3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC spring steel platform. The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion and printed models can easily be removed by bending the print sheet.
- Easy 3-steps Installation 90% factory pre-installed,it only takes 3 steps to complete the installation out of the box.Simple operation and avoid various problems caused by installation errors.
- After Sales Service Creality pays great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 9.84 x 8.66 x 8.66 Inches | Weight: 22.30 Pounds
Warranty: 1 Year
See On Amazon #16
Creality Official Ender 3 Glass Bed 3D Printer Platform, 235x235MM Tempered Glass Plate Build Surface for Ender 3 PRO/Ender 5 PRO/Ender 3 S1/Ender 3 Neo/Ender 3 V2 Neo, Good Adhesion Remove Easily
Asin: B0BVLJ8ZG9
【Great Flatness】 The Glass Platform Offers 0.15Mm Of Flatness Due To The Combination Of Glass And Composite, Ensuring Giving Smoother Build Surface Than A Magnetic Sheet Or Pei Sticker. Its Excellent Flatness Is Effective To Avoid Leveling Failure So As To High Flatness For The Bottom Of The Model..
【Official Creality 3D Store】We Provide Professional After-Sales Support. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Wide Compatibility】Carborundum Glass Platform Is Suitable For Creality 3D Printers Accessories: Ender-3, Ender-3 Pro, Ender-3S, Ender-3 V2, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender 5 S1, Ender 3 V3 Se, Or Suitable For Any Other Printers With A Bed Size Of 235X235mm..
【8 Mohs Hardness】 The Surface Of The Glass Platform Is Covered Inorganic Coating, Which Plays An Anti-Scratch And Dust-Proof Function. It Can Resistant To And Used Repeatedly Without Reducing Performance. What's More, It Is Very Easy To Clean, The Platform Will Be Cleaned By Using Alcohol Or Acetone After Using For Several Times..
Features
- Strong Adhesion & Remove Easily Adopted the technical principle of composite nano molecule, the glass bed has high viscosity after heating, ensuring that the filament won't move otherwhere. And the model does not warp or peel off during printing either. When the platform cools down, the microporous structure will contract as the hotbed cooling.
- 8 Mohs Hardness The surface of the glass platform is covered inorganic coating, which plays an anti-scratch and dust-proof function. It can resistant to and used repeatedly without reducing performance. What's more, it is very easy to clean, the platform will be cleaned by using alcohol or acetone after using for several times.
- Great Flatness The glass platform offers 0.15mm of flatness due to the combination of glass and composite, ensuring giving smoother build surface than a magnetic sheet or PEI sticker. Its excellent flatness is effective to avoid leveling failure so as to high flatness for the bottom of the model.
- Wide Compatibility Carborundum glass platform is suitable for Creality 3d printers accessories: Ender-3, Ender-3 Pro, Ender-3S, Ender-3 V2, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender 5 S1, Ender 3 V3 SE, or suitable for any other printers with a bed size of 235X235mm.
- Official Creality 3D Store We provide professional after-sales support. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #17
Comgrow 2PCS Ender 3 Pro Glass Bed, Upgraded Tempered Glass Plate with Bed Clips, Ender 3 Build Plate 235x235x4mm for Creality Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/3 S1/3 S1 Pro/5 Pro
Asin: B07DS2LZF1 | Ean: 0649910290714 | UPC: 649910290714
Extra Glass Clips - Use Clips To Fix The Ender 3 Pro Bed On The Hot Bed. Easy Model Removal - The Ender 3 Build Plate Is Designed With Model Removal In Mind. Very Easy To Take Off The Models; No Tools Are Needed When Removing Models..
Wide Compatibility - The 3D Printer Glass Bed Is Fit For Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3S/Ender 3 Neo, Ender 5/Ender 5S/Cr-20/Cr-20 Pro. (Perfect For 3D Printer With A Printing Area Of 220*220Mm.) Please Confirm Whether This Ender 3 Pro Bed Mat Is Compatible With Your 3D Printer Before Buying..
Easy Model Removal - The Ender 3 Glass Bed Is Designed With Model Removal In Mind. Very Easy To Take Off The Models; No Tools Are Needed When Removing Models..
Long Durability - Inorganic Coating, High Hardness Of 8 Mohs, Avoiding The Deformation Of The Ordinary Aluminum Heat Bed After Long-Term Use.Undiminished Performance After Repeated Use, No Need For Frequent Replacement..
Features
- NO EDGE CURLING - Ender 3 pro glass bed with the composite coating. The models will stick on the Ender 3 v2 bed firmly without glue, avoiding the issue of the print's edges curling. The 3d printer bed is equipped with 4 clips to fix the hotbed.
- LONG DURABILITY - Inorganic coating, high hardness of 8 Mohs, avoiding the deformation of the ordinary aluminum heat bed after long-term use.Undiminished performance after repeated use, no need for frequent replacement.
- EXTRA GLASS CLIPS - Use clips to fix the Ender 3 pro bed on the hot bed. EASY MODEL REMOVAL - The Ender 3 build plate is designed with model removal in mind. Very easy to take off the models; No tools are needed when removing models.
- EASY MODEL REMOVAL - The ender 3 glass bed is designed with model removal in mind. Very easy to take off the models; No tools are needed when removing models.
- WIDE COMPATIBILITY - The 3d printer glass bed is fit for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3S/Ender 3 Neo, Ender 5/Ender 5S/CR-20/CR-20 Pro. (Perfect for 3D Printer with a printing area of 220*220mm.) Please confirm whether this Ender 3 pro bed mat is compatible with your 3D Printer before buying.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #18
2024 New Version Creality Ender 3 S1 Pro with 200mm/s Printing Speed, Sprite Direct Extruder CR Touch Auto Leveling 300 High-Temp Printing, Dual Z-axis Screw Printing Size 8.66 * 8.66 * 10.63''
Asin: B09VB34771 | Model: Ender 3 S1 Pro | PartNumber: Ender 3 S1 Pro
Cr-Touch Auto-Level Sensor: Crtouch Can Complete Quickly Adjust The The Nozzle Printing Height On The Hot Bed. Cr-Touch Gets The 16-Points Auto-Leveling Program, Which Can Collect More Samples Than The 9-Points Of The Bltouch Which Makes The Bed Leveling More Precise..
Upgraded In All Aspects: Also Like Ender 3 S1, Ender3 S1 Pro Also Has Z-Axis Dual-Screw+Z-Axis Dual-Motor Design. This Can Make Ender 3S1 Pro Works Smoother And More Synchronously To Lower The Possibility Of Lines And Ridges On The Sides Of Your Print, Thus Improvingthe Printing Quality. You Can Also Quickly Install The Printers With 6 Steps. New 4.3 Inch Color Touch Screen Installed And It Takes An User Friendly Ui Face . Led Light Allow You Print In The Dark Environment. The Steel Spring Pei Sheet Bed Can Help You Slove The Adhesion Problem, No Need Shovel Anymore. Filament Detection Sensor Installed And Power Loss Recovery Function Also Supported..
Upgraded 300℃ High-Temp Nozzle: This Creality 3D Printer Comes With Upgraded Brass Nozzle Which Can Stand 300℃ High-Temp, Allow You To Choose More Kinds Of Filament Like Abs, Petg, Pa, Pla, Tpu And Wood. Not Only For More Possibilities Of Creation But Also Gives You A Smoother Printing..
"Sprite" All Metal Direct Drive Extruder: The New Upgraded Direct Extruder Comes With The Pushing Force Up To 80N, The Extruder Realizes Smooth Feeding And Discharging Of Flaments Without Slipping And Works Extremely Well In Printing Flexible Flaments Like Tpu..
Features
- Reach to 200mm/s: 2024 New Version Ender 3 S1 Pro 3d printer, equips 200mm/s printing speed, it is 4 times faster than the other normal 3d printer. Give good printing experience to customers and get a good model in short time.
- Sprite All Metal Direct Drive Extruder: The new upgraded direct extruder comes with the pushing force up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments like TPU.
- CR-Touch Auto-level Sensor: CRTouch can complete quickly adjust the the nozzle printing height on the hot bed. CR-Touch gets the 16-points auto-leveling program, which can collect more samples than the 9-points of the BLTouch which makes the bed leveling more precise.
- Upgraded 300 High-temp Nozzle: This creality 3d printer comes with upgraded brass nozzle which can stand 300 high-temp, allow you to choose more kinds of filament like ABS, PETG, PA, PLA, TPU and Wood. Not only for more possibilities of creation but also gives you a smoother printing.
- Upgraded in All aspects: Also like Ender 3 S1, Ender3 S1 Pro also has Z-axis dual-screw+Z-axis dual-motor design. This can make Ender 3S1 Pro works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improvingthe printing quality. You can also quickly install the printers with 6 steps. New 4.3 inch color touch screen installed and it takes an user friendly UI face . LED light allow you print in the dark environment. The Steel Spring PEI sheet Bed can help you slove the adhesion problem, no need shovel anymore. Filament detection sensor installed and power Loss recovery function also supported.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 24.61 x 17.91 x 19.29 inches | Weight: 2.20 pounds
Warranty: 1 year
See On Amazon #19
Creality Ender CR Touch Auto Bed Leveling Sensor Kit Compatible with Ender 3 V2/Ender 3 Pro/Ender 3/Ender 3 Max/Ender 5/Ender 5Pro with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer
Asin: B098LQ9WPX | Model: US-CR | PartNumber: US-CR
【Widely Application】The Kit Contains 3 Different Mounting Brackets And Extension Cords. You Can Easily Install.
【Creality Ideal Companion】Cr Touch Works For Ender3 V2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro With 32 Bit Motherboard.(Don't Work For Ender 6 )Important: This Cr Touch Doesn't Work For The 8 Bit Mainboard, Please Make Clear What Version Of Your Mainboard Is Before Purchasing..
【Strong Compatibility】Cr Touch 3D Printer Auto Leveling,Compatible With Pei / Sticker Bed / Glass Bed / Metal Bed.
【Easy To Install And Easy To Use】Download The Cr Touch Program From The Creative Official Website And Copy It To The Tf/Sd Card. Insert It Directly Into The Card Slot Of The 3D Printer. The Program Can Be Updated After Power On..
Features
- Upgrade Independent development CR Touch is upgraded to a metal probe, Exquisite exterior design Positioning accuracy 0.04mm , Automatic detection and leveling , It can be reused for more than 100,000 times.
- Easy to install and easy to use Download the CR Touch program from the Creative official website and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. The program can be updated after power on.
- Widely Application The kit contains 3 different mounting brackets and extension cords. You can easily install
- Strong compatibility CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed
- Creality ideal companion CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro with 32 bit motherboard.(Don't work for Ender 6 )Important: This CR touch doesn't work for the 8 bit mainboard, Please make clear what version of your mainboard is before purchasing.
- See more on Amazon...
Brand: Skouphy | Manufacturer: Creality
See On Amazon #20
Creality CR Touch Auto Bed Leveling Sensor Kit for Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5/Ender 5pro/CR10 for 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer
Asin: B0979F7RWN | Model: CR-Touch Auto leveling Kit | PartNumber: CR-Touch Auto leveling Kit | Ean: 0633690247303 | UPC: 633690247303
【Product Durability】 Creality Cr Touch Is Specially Designed For 3D Bed Leveling For Creality 3D Printers. Compared With Bl Touch, It Has Stable Quality, Long Service Life, And Can Be Reused More Than 100,000 Times..
【Strong Compatibility】Cr Touch 3D Printer Auto Leveling,Compatible With Pei / Sticker Bed / Glass Bed / Metal Bed.
【Creality Ideal Companion】Cr Touch Works For Ender3 V2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 S/ Cr 10 With 32 Bit Motherboard.(3D Printer Accessory With The Best Experience).
【Easy To Install And Use】The Kit Contains 3 Different Mounting Brackets And Extension Cords. You Can Easily Install.
Features
- After-sales Service Life-time professional technical supports,If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- Easy to Install and Use The kit contains 3 different mounting brackets and extension cords. You can easily install
- Product Durability Creality CR Touch is specially designed for 3d bed leveling for Creality 3d printers. Compared with BL Touch, it has stable quality, long service life, and can be reused more than 100,000 times.
- Creality ideal companion CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10 with 32 bit motherboard.(3d printer accessory with the best experience)
- Strong compatibility CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed
- See more on Amazon...
First Available: 09/18/2023
Brand: 3idea | Manufacturer: Creality
Dimensions: 1.77 x 2.36 x 3.94 Inches
Warranty: 180day
See On Amazon
Looking For Something Else?
Search