V Type Gantry, 3D Printer Accessories Aluminum AccessoriesV Plate Black for accessories Plastic wheelsProfiles EU Standard 2020
Asin: B0C19HLBRY | Model: Fydun53hy869wfi | PartNumber: Fydun53hy869wfi
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Stable Performance:Strict Quality Control And Quality Assurance, High Factor, Can Be Used With Peace Of Mind..
Modular Work The Torques Adapter Has 3 Working Modes: Real Time Mode, Peaking Mode, Preset Mode,And Can Be Switched Freely..
Wide Application The Electronic Digital Adapter Is Very Suitable For In Ries Such As Automobiles, Bicycles, And Various Mechanical Maintenance.
Features Easy To Use And Easy To Install, With Small Size, Easy To Carry And Store, With Good Performance..
Features
- With great workmanship, can perfect replacement for the old one.
- Features Easy to use and easy to install, with small size, easy to carry and store, with good performance.
- STABLE PERFORMANCE:Strict quality control and quality assurance, high factor, can be used with peace of mind.
- Wide Application The electronic digital adapter is very suitable for in ries such as automobiles, bicycles, and various mechanical maintenance
- Modular Work The torques adapter has 3 working modes: real time mode, peaking mode, preset mode,and can be switched freely.
- See more on Amazon...
Brand: Fydun | Manufacturer: Fydun
See On Amazon Similar To V Type Gantry 3D Printer
#1
ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 8.85x8.85x11in Large Printing Size
Asin: B0BJCQ59JS | Model: US-EL-3D-N3P | PartNumber: US-EL-3D-N3P
【Nozzle Kit For Better Printing Effect】The Nozzle Kit Contains A Tc4 Titanium Alloy Throat Pipe, An Aluminum Alloy Flat Heat Sink Structure, And A Brass Nozzle.The Widened Aluminum Heat Sink Paired With The Front Close-Fitting Efficient Cooling Fan For A Better Heat Dissipation Effect And Lower The Temperature Of The Throat Pipe, Thereby Reducing The Possibility Of Nozzle Clogging..
【More Stable Printing】The Z-Axis With Dual Synchronized Lead Screws And Dual-Motor Drive For More Stable Movement Of The Print Head And Higher Printing Accuracy, Avoiding The Printing Deviation Driven By A Single Z-Axis Lead Screw Motor. The 4-Wheel V-Guide Rail Pulley Is Made Of Pom With More Stable Movement, Low Noise, Wear Resistance, And Longer Service Life..
【Smarter Printing Experience】Auto Mesh Bed Leveling Adopts A Non-Contact High Precision Sensor To Automatically Scan 36 (6X6) Points Of The Hotbed And Collect Data In Real-Time, And Then Adjust The Z-Axis Height To Compensate For Any Irregularities And Unevenness Of The Printing Platform. (Only Applicable To Metal Printing Platforms) Smart Resume Printing: The Printer Will Auto-Pause When The Filament Runs Out Or Breaks, And You Can Resume Printing After A Power Outage..
【Dual-Gear Direct Extruder】The New Dual-Gear Direct Drive Extruder Is Made Of Sus303 High-Quality Stainless Steel With A 3:1 Reduction Ratio And Stronger Extrusion Force For Smoother Filament Feeding And More Stable & Accurate Printing, Which Greatly Reduces Nozzle Clogging And Under-Extrusion Issues, Printing Effect Is Better Than Bowden Extruder. Compatible With Multiple Filaments Such As Pla, Tpu, Petg, And Abs..
Features
- Overview of Neptune 3 Pro 225x225x280mm/8.85x8.85x11 inch market mainstream printing size can meet the needs of most users. With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation.
- Dual-Gear Direct Extruder The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS.
- Nozzle Kit for Better Printing Effect The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging.
- Smarter Printing Experience Auto mesh bed leveling adopts a non-contact high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axis height to compensate for any irregularities and unevenness of the printing platform. (Only applicable to metal printing platforms) Smart resume printing: the printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage.
- More Stable Printing The Z-axis with dual synchronized lead screws and dual-motor drive for more stable movement of the print head and higher printing accuracy, avoiding the printing deviation driven by a single Z-axis lead screw motor. The 4-wheel V-guide rail pulley is made of POM with more stable movement, low noise, wear resistance, and longer service life.
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 19.00 x 23.00 x 9.00 inches | Weight: 22.00 pounds
Warranty: 8 years manufacturer
See On Amazon #2
Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
Asin: B07WHYBVJ5 | Ean: 6973298330811
Work Better. It Makes Loading The Filament Easier And Smoother, No Worries About Filament Scraping Or Breaking..
Easy To Install. This Extruder Diy Kit Comes With An Instruction Of How To Put It Together, Which Makes It More Easy To Install..
Fits 1.75Mm Filament. 40 Teeth Drive Gear Compatible With Pla/Abs/Wood/Tpu/Pteg. Please Note: Some Printer Models Like Ender 3 And Edner 3 Pro, Their Original Extrusion Gears Cannot Be Removed, So These Model Printers Do Not Have To Change The Extrusion Screw. Ender 3V2，Its Extrusion Gear Can Be Replaced..
Last Over Years. Made By High Quality Aluminum, Last Much Longer Your Stock Plastic Or 3D Printed Extruder Feeder Drive..
Features
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2 its extrusion gear can be replaced.
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #3
Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament 3D Printer Extruder Drive Feeder
Asin: B09LQKN5WG | Model: / | PartNumber: /
🎈【Improved Performance】The Optimized Extruder With Metal Extrusion And Original Hotend Kit Pushes The Filament Into The Printer Nozzle, Greatly Making The Metal Extruder Retain Power In Filament Feed-In. And The Beveled Filament Intake Can Prevent Scraping The Filament As It Is Pulled Into The Feeder..
🎈【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
🎈【Easy To Install】Diy Kit And You Need To Assemble By Yourself. The Full Necessary Screws & Parts Kit For The Extruder Is Included. Referring To Instructions Or Our 5Th Picture To Install, It Is Very Easy And Straightforward To Switch To This Upgraded Part On Your Machine..
🎈【Work Better】Our 3D Printer Extruder Kits Have An Adjustable Bolt So That You Can Adjust The Pressure Of The Extruder Gear As Needed. The Extruder Drive Has Better Stronger Pressure Pushing The Filament Into The Printer Nozzle And So Will Improve The Printer's Performance. 40 Teeth Drive Gear Feeds The 1.75Mm Filament, Compatible With Pla/Abs/Wood/Tpu/Pteg..
Features
- Quality Assurance 100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.
- Work Better Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.
- Improved Performance The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
- Easy To Install DIY kit and you need to assemble by yourself. The full necessary screws & parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 4.33 x 3.15 inches
See On Amazon #4
Creality Ender 3 V3 SE 3D Printer, 250mm/s Faster Printing Speed CR Touch Auto Leveling Sprite Direct Extruder Dual Z-Axis Auto Filament Loading Ender 3D Printer Print Size 8.66x8.66x9.84 inch
Asin: B0CNWFDBZ6 | Model: Upgrade Creality Ender-3 V3 SE | PartNumber: Upgrade Creality Ender-3 V3 SE
【Worry-Free Cr Touch Auto Leveling & Strain Sensor】Ender-3 V3 Se 3D Printer Features A Cr Touch Sensor For Auto Leveling And A Strain Sensor For Auto Z-Offset. Just Lay Back And Enjoy The Print Success, There Is No Need To Participate Manually Throughout The Process, Making Leveling Much Easier..
【Auto Filament Loading & Unloading】Ender 3 V3 Se Supports Automatic Loading And Unloading Filament Function. Tap "Extrude", And The Filament Will Flow Out Of The Nozzle Smoothly. Tap "Retract", And The Filament Will Exit Quickly. So, It Is Effortless To Replace The Filament..
【Creality Official Support Service】Creality Provides 12-Month After-Sales Service For The Creality Ender-3 V3 Se 3D Printers. If You Have Any Question Or Need Support About The Product, Please Contact Me Via Amazon, We Will Respond With 24 Hours..
【Quick Assembly & Easy To Use】Preassembly Has Solved Those Hassles And Worries Of Parts Assembly, It Only Takes 3 Steps To Complete The Assemble The Ender-3 V3 Se 3D Printer, It Only Takes 20 Minutes From The Unpacking To The First Printing..
【Stable Dual Z-Axis & Y-Axis Linear Shafts】High-Precision Dual Z-Axis Lead Screws Reduce Z Wobbling Effectively, Avoid Printing Deviation In Single-Axis Printing. The Y-Axis Features Two 8Mm Linear Shafts Made Of Strong And Wear-Proof Steel, Ensuring Printing Stability And Higher Printing Accuracy Over A Long-Lasting Time..
【Powerful"Sprite" Direct Extruder】Ender 3 V3 Se Is The Upgrade Of Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender 3 S1, Ender 3 S1 Pro Etc 3D Printer, Comes With The New Upgraded "Sprite" Full Metal Dual-Geardirect Extruder, More Powerful Extruder Pushing Force And Lightweight, The Extruder Realizes Smooth Feeding And Discharging Of Flaments Without Slipping. Works Extremely Well In Printing Flaments Like Pla, Tpu, Petg, Etc. And The Extruder Is Market-Proven For Its Reliability, As Over 500,000 Units Have Been Shipped Worldwide..
Features
- 250mm/s High-speed Printing Creality Ender 3 V3 SE 3d printer supports a maximum printing speed of 250mm/s, 2500mm/s acceleration.The speed has been greatly improved while maintaining the printing quality, saving 73% of the time compared with other printers.
- PowerfulSprite Direct Extruder Ender 3 V3 SE is the upgrade of ender 3, ender 3 v2, ender 3 pro, ender 3 neo, ender 3 v2 neo, ender 3 s1, ender 3 s1 pro etc 3d printer, comes with the new upgraded Sprite full metal dual-geardirect extruder, more powerful extruder pushing force and lightweight, the extruder realizes smooth feeding and discharging of flaments without slipping. Works extremely well in printing flaments like PLA, TPU, PETG, etc. And the extruder is market-proven for its reliability, as over 500,000 units have been shipped worldwide.
- Worry-free CR Touch Auto Leveling & Strain Sensor Ender-3 V3 SE 3d printer features a CR Touch sensor for auto leveling and a strain sensor for auto z-offset. Just lay back and enjoy the print success, there is no need to participate manually throughout the process, making leveling much easier.
- Stable Dual Z-axis & Y-axis Linear Shafts High-precision dual Z-axis lead screws reduce Z wobbling effectively, avoid printing deviation in single-axis printing. The Y-axis features two 8mm linear shafts made of strong and wear-proof steel, ensuring printing stability and higher printing accuracy over a long-lasting time.
- Creality Official Support Service Creality provides 12-month after-sales service for the creality ender-3 v3 se 3d printers. If you have any question or need support about the product, Please contact me via Amazon, we will respond with 24 hours.
- Quick Assembly & Easy to Use Preassembly has solved those hassles and worries of parts assembly, It only takes 3 steps to complete the assemble the ender-3 v3 se 3d printer, it only takes 20 minutes from the unpacking to the first printing.
- Auto Filament Loading & Unloading Ender 3 V3 SE supports automatic loading and unloading filament function. Tap Extrude, and the filament will flow out of the nozzle smoothly. Tap Retract, and the filament will exit quickly. So, it is effortless to replace the filament.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 15.00 x 22.00 x 9.00 inches | Weight: 15.60 pounds
Warranty: 1 year warranty
See On Amazon #5
Official Creality Ender 3 Direct Drive Extruder Kit, Comes with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, BL Touch, Compatible with Ender 3 Pro/Ender 3 V2
Asin: B08J7N2LNL | Model: US4-ENDER3JINDUANJICHU-FBA | PartNumber: US4-ENDER3JINDUANJICHU-FBA
Direct Extruding Smooth Feed-In - Lower Torque Requirements On The Stepper Motor, Reducing The Possibility Of The Nozzle Blockage When Retracting Filament And Malfunction When Loading New Filament. There Is More Even Feed-In With Direct Extruding Than Bowden Tube Extruding..
Printing At High - Temperature, Strong Compatibility: Compatible With More Types Of Filament Like Pla Filament, Petg Filament And Tpu Filemnt. When Printing Flexible Tpu Under High Temperature, It Can Optimize Tpu Printing Performance..
Integrated All Metal Hotend - It's Sturdy And Wear-Resistant With An All-Metal Shell And Surface Oxidation Treatment; An Integrated Structure Is Convenient For Wiring And Replacing..
Easy To Install And Use - Switch Bowden Extrusion To Direct Extruder At Any Time And Easy To Disassembly. It Doesn't Affect The Inherent Function Of The Printer Because It's A Complete Extrusion Kit. With Longer Extruder Motor Connecting Cable, Tools, Accessories, And Wiring Diagram Instruction For Installation, Easy To Assemble..
Features
- Compatibility with - Creality Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer.
- Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble.
- Direct Extruding Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding.
- Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment; an Integrated structure is convenient for wiring and replacing.
- Printing at High - Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance.
- See more on Amazon...
Brand: Wolias | Manufacturer: Creality 3D
Weight: 0.80 pounds
See On Amazon #6
Official Creality Ender 3 V2 Neo 3D Printer with CR Touch Auto Leveling PC Spring Steel Platform Full-Metal Extruder 95% Pre-Installed 3D Printers Resume Print and Model Preview 8.66*8.66*9.84 inch
Asin: B08BL41ZMY | Model: Ender 3 V2 Neo | PartNumber: Ender 3 V2 Neo | Ean: 8935672542577, 8935672542508, 8935672542539, 0735209618557 | UPC: 735209618557
3.Brand New 4.3 Inch Ui User Interface: The Upgraded Ui Adds A Model Preview Function, Making It Easier To Observe The Printing Shape And Progress For Customers. Which Is Convenient For You To Know About The Model Status. Also, It Supports Nine Languages For Different Customers Demand..
5.Silent Motherboard: The Mainboard Is 4.2.2 Version But It Is Silent Mainboard Which Is Different From Ender 3 Mainboard. This Ender-3 V2 Neo Equipped With Self-Developed Silent Motherboard, Which Has Stronger Anti-Interference, Faster And More Stable Motion Performance, Silent Printing And Low Decibel Operation, Create A Quiet Environment.The Extruder Is Upgraded To Full-Metal Extruder, Which Has Greater Extrusion Force And Is More Durable, Reducing The Risk Of Nozzle Blockage..
4.Pc Spring Steel Magnetic Build Plate: Different From Ender 3, Ender 3 Pro And Ender 3 V2, This New-Released Fdm 3D Printer Comes With A Removable Pc Spring Steel Magnetic Build Plate. The Innovative Printing Platform Is A Combination Of A Pc Coating, A Spring Steel Sheet And A Magnetic Sticker, Which Sticks To The Surface Immediately When Released. The Pc Coating Brings Good Adhesion For Filament, And The Finished Models Can Be Easily Removed By Bending The Print Sheet..
2.Cr Touch Auto Bed Leveling: Upgraded Cr Touch 16-Point Automatic Bed Leveling Technology Saves You In The Trouble Of Manual Leveling. Easy To Use, The Intelligent Leveling System Can Automatically Compensate For The Printing Height Of Different Points Of The Hot Bed. It Saves Much More Time For Customers In Long-Time Leveling Adjustment, Quickly Finish The Leveling Process..
Features
- 1.Easy Assembly: Compared to Ender-3 V2, this Ender-3 V2 Neo printer is pre-installed, and the assembly requires only 3 steps. Friendly enough to users and beginners in assembly process, which will save much time. It is convenient for customers to install it in quick way, more efficient.
- 2.CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you in the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the hot bed. It saves much more time for customers in long-time leveling adjustment, quickly finish the leveling process.
- 3.Brand New 4.3 Inch UI User Interface: The upgraded UI adds a model preview function, making it easier to observe the printing shape and progress for customers. Which is convenient for you to know about the model status. Also, it supports nine languages for different customers demand.
- 4.PC spring steel magnetic build plate: Different from ender 3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC spring steel magnetic build plate. The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion for filament, and the finished models can be easily removed by bending the print sheet.
- 5.Silent Motherboard: The mainboard is 4.2.2 version but it is silent mainboard which is different from ender 3 mainboard. This Ender-3 V2 Neo equipped with self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation, create a quiet environment.The extruder is upgraded to full-metal extruder, which has greater extrusion force and is more durable, reducing the risk of nozzle blockage.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 18.58 x 17.24 x 16.70 inches | Weight: 17.20 pounds
Warranty: 1 year
See On Amazon #7
Creality 3D Official Printer Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Metal Power Supply Holder and Stepper Motor, 3D Printer Ugrades Kit for Ender 3, Ender 3 Pro, Ender 3 V2
Asin: B09N8QQDSP | Model: CREALITYENDER3DUALZ | PartNumber: CREALITYENDER3DUALZ
【Smooth Running】 Upgrade Single Z-Axis Structure To A Dual Z-Axis Structure, Will Make The Printer More Easy To Leveling, Both Ends Of The X Axis Are Raised And Lowered Synchronously, Which Reduces Difficulty And Frequency Of Bed Leveling Obviously..
【After Sales Service】Creality 3D Pay Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【High Comparable】The Dual Z Axis Upgrade Kit Is Compatible With Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D Printer. Easily Improve 3D Printers With Low Cost Efficiency To Dual Z Axis Mode..
【Stable Performance】 Compared With Closed Timing Belt, This 3D Printer Parts Set Still Retains The Design Of Stepper Motor To Ensure Screw Rod Smooth Operation..
Features
- Increased Accuracy Compared with original structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer.
- Stable Performance Compared with Closed Timing Belt, this 3D printer parts set still retains the design of stepper motor to ensure screw rod smooth operation.
- Smooth Running Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously.
- High Comparable The dual z axis upgrade kit is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D printer. Easily improve 3D printers with low cost efficiency to Dual Z axis mode.
- After Sales Service Creality 3D pay great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 3.94 x 15.55 inches | Weight: 2.01 pounds
See On Amazon #8
Official Creality Ender 3 V3 SE Build Plate, Original PEI 3D Printer Platform Kit 235x235mm Flexible Spring Steel Texture Surface Print Bed for Ender 3/3 S1/3S1 Pro/3 Neo/3 V2 Neo/3 V3 KE/3 V3/K1/K1C
Asin: B0CJTXJT24
【Great Adhesion More Stable】A Distinctive Frosted Feel Given By The Special Rough Frosted Surface Of The Plate. Higher Adhesion Of Models, Not Easy To Warp While Firmly Locks Creativity During The Printing Process..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Wide Application】235*235Mm Spring Steel Build Plate 3D Printer Bed Compatible With Ender 3/ Ender 3 V2/ Ender 5/ Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ender 3 V3 Ke/3V3 Cr 10 Se/K1/K1c And Other Same-Sized Beds. After Replacing The Printing Bed, Please Level The Bed Again For Better Printing Results..
【Easy To Remove Printed Models】Easy To Remove The Prints Without Tools, Just Take Out The Spring Steel Plate And Slightly Flex It Repeatedly To Pop Your Prints Right Off. No Need To Scratch, Pry And Damage Your Prints!.
Features
- Quality Assurance 100% Official Creality Ender 3 V3 SE build plate, original 235*235mm spring steel removable flexible textured heated bed platform. The spring steel plate can withstand the numerous heat cycles that a 3D printer bed goes through from print to print.
- Easy to Remove Printed Models Easy to remove the prints without tools, just take out the spring steel plate and slightly flex it repeatedly to pop your prints right off. No need to scratch, pry and damage your prints!
- Great Adhesion More Stable A distinctive frosted feel given by the special rough frosted surface of the plate. Higher adhesion of models, not easy to warp while firmly locks creativity during the printing process.
- Wide Application 235*235mm spring steel build plate 3d printer bed compatible with Ender 3/ Ender 3 v2/ Ender 5/ Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/Ender 3 V3 KE/3V3 CR 10 SE/K1/K1C and other same-sized beds. After replacing the printing bed, please level the bed again for better printing results.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 0.07 x 9.29 x 9.29 inches
See On Amazon #9
Creality Ender 3 V3 SE 3D Printer, 250mm/s CR Touch Auto Leveling FDM 3D Printer with Sprite Direct Extruder, Dual Z-axis & Y-axis, Auto-Load Filament, Print Size 8.66x8.66x9.84 inch
Asin: B0CRR1HFZF | Model: Creality Ender 3 V3 SE | PartNumber: Creality Ender 3 V3 SE
🤗 𝐒𝐏𝐑𝐈𝐓𝐄 𝐄𝐗𝐓𝐑𝐔𝐃𝐄𝐑 & 𝟑𝟐-𝐁𝐈𝐓 𝐌𝐀𝐈𝐍𝐁𝐎𝐀𝐑𝐃 - The Market-Proven “Sprite” Direct Drive Extruder Of Ender 3 V3 Se 3D Printer Ensures Smooth And Consistent Feeding Of Pla, Petg, And Also Flexible Tpu, Bringing More Possibilities. The 32-Bit Silent Mainboard Uses An Advanced Stepper Motor Drive To Control All Axes More Precisely For Less Operation Noise..
🤗 𝐄𝐀𝐒𝐘 𝐌𝐎𝐃𝐄𝐋 𝐑𝐄𝐌𝐎𝐕𝐀𝐋 𝐀𝐍𝐃 𝐌𝐎𝐑𝐄 - Ender 3 V3 Se 3D Printer Takes Up Less Space But Brings An Ample Build Volume. The Pc Spring Steel Build Plate Is Sticky And Flexible, Making It Easy To Remove The Printed Models By Bending It Slightly. Thanks To The Power Loss Recovery Function, It Can Resume Printing After An Unexpected Power Failure, Avoiding Filament And Time Waste..
🤗 𝐀𝐅𝐓𝐄𝐑-𝐒𝐀𝐋𝐄𝐒 𝐒𝐔𝐏𝐏𝐎𝐑𝐓 - Creality Provides A 12-Month After-Sales Service For All 3D Printers And A 3-Month Service For Wearing Parts, Such As The Nozzle Kit, Timing Belt Kit, And Build Plate. Feel Free To Contact Us Anytime If You Need!.
🤗 𝐀𝐔𝐓𝐎 𝐅𝐈𝐋𝐀𝐌𝐄𝐍𝐓 𝐋𝐎𝐀𝐃𝐈𝐍𝐆 & 𝐔𝐍𝐋𝐎𝐀𝐃𝐈𝐍𝐆 - Ender 3 V3 Se Supports Automatic Loading And Unloading Filament Function. Tap "Extrude", And The Filament Will Flow Out Of The Nozzle Smoothly. Tap "Retract", And The Filament Will Exit Quickly. So, It Is Effortless To Replace The Filament..
🤗 𝐘-𝐀𝐗𝐈𝐒 𝐋𝐈𝐍𝐄𝐀𝐑 𝐒𝐇𝐀𝐅𝐓𝐒 & 𝐃𝐔𝐀𝐋 𝐙-𝐀𝐗𝐈𝐒 - The Rigid Dual Z-Axis Lead Screws Reduce Z Wobbling Effectively. The Y-Axis Features Two 8Mm Linear Shafts Made Of Strong And Wear-Proof Steel, Which Underpins A Steady And Accurate Motion Of The Build Platform For A Lasting Time..
🤗 𝐂𝐑 𝐓𝐨𝐮𝐜𝐡 𝐀𝐔𝐓𝐎 𝐋𝐄𝐕𝐄𝐋𝐈𝐍𝐆 & 𝐒𝐓𝐑𝐀𝐍𝐈𝐍 𝐒𝐄𝐍𝐒𝐎𝐑 - Ender-3 V3 Se 3D Printer Features A Cr Touch Sensor For Auto Leveling And A Strain Sensor For Auto Z-Offset. Just Lay Back And Enjoy The Print Success, There Is No Need To Participate Manually Throughout The Process, Making Leveling Much Easier..
Note: If You Have Problems With Leveling, Please Check The Following Or Contact Us Directly For Help! First Layer Printing Non-Stick/Laminated Overall Non-Stick/Laminated: A. Clean The Platform Board, Preheat The Nozzle In Advance, Take Out The Consumables, Clean The Nozzle, And Re-Level It. B. You Can Apply Solid Glue On The Platform Plate Before Printing. C. Adjust Z-Axis Compensation According To The Printing Conditions Of The First Layer..
🤗 𝟑 𝐒𝐓𝐄𝐏𝐒 𝐓𝐎 𝐆𝐄𝐓 𝐒𝐓𝐀𝐑𝐓𝐄𝐃 - Creality Ender 3 V3 Se 3D Printer Is Easy To Put Together In 3 Steps. It Uses Cr Touch Sensor For Auto Leveling And A Strain Sensor For Auto Z Offset, Saving The Need For A Calibration Card Or Knob Screws. So Easy To Achieve A Perfect First Layer. Also, You Can Load Or Unload The Filament With One Tap. All Set Within Just 20 Minutes..
Features
- / & - Ender 3 V3 SE 3D printer can print at up to 250mm/s speed with 2500mm/s acceleration, allowing you to complete the models efficiently. The Optimized UI uses motion graphics to display the leveling process and other parameters, so you will know how the printer is doing at a glance.
- - Creality Ender 3 V3 SE 3D printer is easy to put together in 3 steps. It uses CR Touch sensor for auto leveling and a strain sensor for auto Z offset, saving the need for a calibration card or knob screws. So easy to achieve a perfect first layer. Also, you can load or unload the filament with one tap. All set within just 20 minutes.
- & - - The market-proven Sprite direct drive extruder of Ender 3 V3 SE 3D printer ensures smooth and consistent feeding of PLA, PETG, and also flexible TPU, bringing more possibilities. The 32-bit silent mainboard uses an advanced stepper motor drive to control all axes more precisely for less operation noise.
- & - Ender-3 V3 SE 3d printer features a CR Touch sensor for auto leveling and a strain sensor for auto z-offset. Just lay back and enjoy the print success, there is no need to participate manually throughout the process, making leveling much easier.
- & - Ender 3 V3 SE supports automatic loading and unloading filament function. Tap Extrude, and the filament will flow out of the nozzle smoothly. Tap Retract, and the filament will exit quickly. So, it is effortless to replace the filament.
- - & - - The rigid dual Z-axis lead screws reduce Z wobbling effectively. The Y-axis features two 8mm linear shafts made of strong and wear-proof steel, which underpins a steady and accurate motion of the build platform for a lasting time.
- - Ender 3 V3 SE 3D printer takes up less space but brings an ample build volume. The PC spring steel build plate is sticky and flexible, making it easy to remove the printed models by bending it slightly. Thanks to the power loss recovery function, it can resume printing after an unexpected power failure, avoiding filament and time waste.
- - - Creality provides a 12-month after-sales service for all 3d printers and a 3-month service for wearing parts, such as the nozzle kit, timing belt kit, and build plate. Feel free to contact us anytime if you need!
- Note: If you have problems with leveling, please check the following or contact us directly for help! First layer printing non-stick/laminated Overall non-stick/laminated: a. Clean the platform board, preheat the nozzle in advance, take out the consumables, clean the nozzle, and re-level it. b. You can apply solid glue on the platform plate before printing. c. Adjust Z-axis compensation according to the printing conditions of the first layer.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 19.29 x 13.74 x 14.33 inches | Weight: 19.84 Pounds
Warranty: 1 year
See On Amazon #10
UniTak3D Ender 3 Direct Drive Upgrade Conversion Bracket for Ender 3 V2,Ender 3 Pro and Voxelab Aquila 3D Printer for B-MG&Dual Gear&Bowden Extruder(NOT for Neo Series,Extruder&Hotend NOT Include)
Asin: B09KG8MMQ2 | Model: Uni150 | PartNumber: Uni150
Features
- Application :The direct drive upgrade kit is suitable for Ender 3 V2,Ender 3 Pro,Ender 3,Voxelab Aquila 3D printers,NOT compatible with Ender 3 Max,Ender 3 Neo,Ender 3 V2 Neo,NOT compatible with TITAN extruder.NOTE:Extruder or hotend are NOT included in the package;For Ender 3 V2 users, you can print the following fan cover(STL:5340394)
- See more on Amazon...
Brand: UniTak3D | Manufacturer: UniTak3D
Weight: 0.40 pounds
See On Amazon #11
Anycubic Kobra 2 3D Printer, 6X Faster Firmware Upgrades 300mm/s Max Print Speed LeviQ 2.0 Auto Leveling with Dual-Gear Extrusion System Efficient Precise Delivery Fully Open Source 8.7"x8.7"x9.84"
Asin: B0BZ7RQ1WT
【Efficient And Precise Filament Delivery】Dual-Geared Extrusion Structure Accurately Controls Material Delivery. Upgraded Extruder Power Reaches Up To 60 Watts, Quickly Melts The Filament In An Enhanced Flowability..
【Smarter Printing Experience】The 4.3-Inch Full-Colored And Sensitive Lcd Touchscreen With Comprehensive Functions And Settings Offers A Better Printing Experience..
【Excellent Customer Service】 Each Anycubic Kobra 2 3D Printer Comes With A One-Year After Service (With The Print Head Warrantied For 3 Months And The Heated Bed For 6 Months), And Lifetime Technical Support. If You Have Any Questions You Can Reach Us At Amazonsupport@Anycubic.Com..
【Stable Printing With Double Z-Axis Threaded Rod】The Z-Axis Adopts A Double-Threaded Rod Structure, Lessening The Lifting Resistance While Printing. It Flattens The Building Platform And Reduces The Printing Layers, Bringing Excellent Printing Results Even At A Faster Speed..
【Easy Modular Assembly】Assemble Anycubic Kobra 2 With Ease In Just 10 Minutes With Only 5 Pieces To Put Together..
【Rapid Cooling And Fast Printing】With An Optimized Dissipation Design, The Cooling Fan Reaches Up To 7,000Rpm. This Ensures Rapid Cooling Down Of The Models And A Fast Printing Experience..
【Fast And Precise Leveling】Brand New Upgraded Leviq 2.0 Automatic Leveling System In Combination With Tailored Modular Realize Smart Offset To The Z-Axis Without Manual Adjustment. Z-Offset Can Be Customed To Cater To Various Printing Needs..
Features
- Save Time with 6X Faster Printing Anycubic Kobra 2 Firmware Upgrades. Save time up to 76% when printing a same-sized model at a recommended speed. The Maximum Print Speed is 300mm/s, Recommended Print speed is 200mm/s, Accelerated Speed is 3000mm/s .
- Fast and Precise Leveling Brand new upgraded LeviQ 2.0 Automatic Leveling System in combination with tailored modular realize smart offset to the Z-axis without manual adjustment. Z-Offset can be customed to cater to various printing needs.
- Efficient and Precise Filament Delivery Dual-geared extrusion structure accurately controls material delivery. Upgraded extruder power reaches up to 60 watts, quickly melts the filament in an enhanced flowability.
- Rapid Cooling and Fast Printing With an optimized dissipation design, the cooling fan reaches up to 7,000rpm. This ensures rapid cooling down of the models and a fast printing experience.
- Stable Printing with Double Z-axis Threaded Rod The Z-axis adopts a double-threaded rod structure, lessening the lifting resistance while printing. It flattens the building platform and reduces the printing layers, bringing excellent printing results even at a faster speed.
- Easy Modular Assembly Assemble Anycubic Kobra 2 with ease in just 10 minutes with only 5 pieces to put together.
- Smarter Printing Experience The 4.3-inch full-colored and sensitive LCD Touchscreen with comprehensive functions and settings offers a better printing experience.
- Excellent Customer Service Each Anycubic Kobra 2 3D Printer comes with a one-year after service (with the print head warrantied for 3 months and the heated bed for 6 months), and lifetime technical support. If you have any questions you can reach us at amazonsupport@anycubic.com.
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 16.93 x 19.13 x 19.13 inches | Weight: 18.52 pounds
Warranty: 1 year warranty and lifetime technical support
See On Amazon #12
SIMAX3D 3D Printer Rollers Polycarbonate Gantry Wheels v Slot (13pcs/Pack) Clear Ender 3 Bed Wheels 625zz for Creality Ender Rollers Artillery Sidewinder x1 Rollers
Asin: B08L1Z87PZ | Model: POM002 | PartNumber: POM002 | Ean: 0784112177880 | UPC: 784112177880
Our V Slot Pom Pulley Wheels Polycarbonate Wheels Can Replace With Gantry Wheels, Ender 3 Rollers, Ender 3 V2 Rollers, Ender 5 Rollers, Artillery Sidewinder X1 Rollers And Most Other 3D Printers..
Switch Your 3D Printer Wheels After 6-9 Months Use Will Extend Your 3D Printer Life..
Simax3d 3D Printer Pulley Wheels Polycarbonate Outer Diameter: 24Mm, Inner. Diameter: 5Mm, Height: 10.23Mm.
This 3D Printer Pulley Wheel Polycarbonate Is Transparent..
Features
- Package Include: 3D Printer Rollers Polycarbonate *13pcs
- This 3D Printer Pulley wheel Polycarbonate is transparent.
- Our v slot pom pulley wheels Polycarbonate Wheels can replace with Gantry wheels, Ender 3 Rollers, Ender 3 v2 Rollers, Ender 5 Rollers, Artillery sidewinder x1 rollers and most other 3D printers.
- SIMAX3D 3D Printer pulley wheels Polycarbonate Outer Diameter: 24mm, Inner. diameter: 5mm, Height: 10.23mm
- Switch your 3D printer wheels after 6-9 months use will extend your 3D printer life.
- See more on Amazon...
Brand: SIMAX3D | Manufacturer: SIMAX3D
See On Amazon #13
SIMAX3D 3D Printer Rollers v Slot (13pcs/Pack) Gantry Wheel POM Pulley Ender 3 Bed Wheels 625zz for Creality CR10 Ender 3 pro Artillery Sidewinder x1 Rollers
Asin: B08B4JDB67 | Model: POM003 | PartNumber: POM003 | Ean: 0782940268671 | UPC: 782940268671
Our V Slot Pom Pulley Wheels Wheels Can Replace With Gantry Wheels, Ender 3 Rollers, Ender 3 V2 Rollers, Ender 5 Rollers, Artillery Sidewinder X1 Rollers And Most Other 3D Printers..
Switch Your 3D Printer Wheels After 6-9 Months Use Will Extend Your 3D Printer Life..
Simax3d 3D Printer Pulley Wheels Outer Diameter: 24Mm, Inner. Diameter: 5Mm, Height: 10.23Mm.
This 3D Printer Pulley Wheel Is Black..
Features
- Package Include: 3D Printer Rollers *13pcs
- This 3D Printer Pulley wheel is black.
- Our v slot pom pulley wheels Wheels can replace with Gantry wheels, Ender 3 Rollers, Ender 3 v2 Rollers, Ender 5 Rollers, Artillery sidewinder x1 rollers and most other 3D printers.
- SIMAX3D 3D Printer pulley wheels Outer Diameter: 24mm, Inner. diameter: 5mm, Height: 10.23mm
- Switch your 3D printer wheels after 6-9 months use will extend your 3D printer life.
- See more on Amazon...
Brand: SIMAX3D | Manufacturer: SIMAX3D
See On Amazon #14
Creality 3D Printer POM Wheel Plastic Pulley Linear Bearing for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 3 S1/Ender 5 Series/CR 10 Series/Neptune 3 Pro 3D Printer (Pack of 10)
Asin: B07KXPD6XZ | Model: CR-Wheel-10 | PartNumber: CR-Wheel-10 | Ean: 0667797511760 | UPC: 667797511760
These 3D Printer Wheels Move Smoothly, With Low Noise And High Printing Accuracy, Which Can Improve The Printing Speed And Printing Effect Very Well.
It Is Made Of Durable Pom Wheels,Full Metal 625Zz Bearings.
It Is Applicable For The V Slot Profile Of Most Diy 3D Printers,Like Creality Ender 3 Series, Cr-10 Series, Anet A8, Mega S 3D Printer.
Outer Diameter: 24Mm, Inner Diameter: 5Mm, Height: 11Mm.
Features
- Each plastic pulley wheels with the precision center spacers between the two bearings. It will protect the wheel when pressure is applied during wheel installation. It is normal for the ring to move, otherwise the bearing cannot rotate. This is not a quality issue
- Outer Diameter: 24mm, Inner diameter: 5mm, Height: 11mm
- These 3D printer wheels move smoothly, with low noise and high printing accuracy, which can improve the printing speed and printing effect very well
- It is applicable for the V slot profile of most DIY 3D printers,like Creality Ender 3 Series, CR-10 Series, Anet A8, Mega S 3D Printer
- It is made of durable POM wheels,full metal 625zz bearings
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #15
Creality Ender 3 V3 SE Extruder Kit, Original Direct Extrusion Kit Dual Gear Extruder 3.5:1 Gear Ratio Feeding Extrusion Mechanism Kit for Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 V3 KE 3D Printer
Asin: B0CJTYGTMQ
✨【Large Torque Smooth Feeding】The Use Of Gear With 3.5:1 Gear Ratio Which Perfectly Matches With Motor Makes Extrusion Force Up To 80N (Depending On Filaments). More Precise Control Of Feeding Withdrawal..
👍【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
🎈【Easy To Operate】Labor-Saving Wrench Design Makes It More Convenient And Faster To Insert Filament. With Adjustable Tensioner, Allows You To Fine-Tune The Pressure Exerted By The Drive Gears Onto The Filament To Print More Exquisite Models..
💕【Dual Gear For Stable Printing】The Ender 3V3 Se Direct Extruder With Dual Gear Drive Does Not Damage The Filament, Supports Stable, Smooth And Precise Filament Feeding..
Features
- Quality Assurance Creality 100% official Ender 3 V3 SE Extrusion Kit. The shell of Ender3 V3 SE extrusion is made of high-quality plastic, and the extruded gears inside are made of metal material. Compatible with Creality Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1//Sermoon V1/Ender-3 V3 SE/Ender-3 V3 KE 3D Printer.
- Dual Gear For Stable Printing The Ender 3V3 SE direct extruder with dual gear drive does not damage the filament, supports stable, smooth and precise filament feeding.
- Large Torque Smooth Feeding The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal.
- Easy to Operate Labor-saving wrench design makes it more convenient and faster to insert filament. With adjustable tensioner, allows you to fine-tune the pressure exerted by the drive gears onto the filament to print more exquisite models.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #16
Comgrow Upgraded Ender 3 Extruder, Ender 3 V2 Metal Extruder Aluminum MK8 Bowden Extruder Drive Feeder, 3D Printer Parts for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro/CR-10/CR-10S
Asin: B07B5118T7 | Ean: 0649910034608 | UPC: 649910034608
Easy To Install-Full Metal Aluminum Alloy, Diy Kit And You Need To Assemble By Yourself. The Ender 3 Metal Extruder Includes All The Necessary Screws & Parts You Needed. All You Need To Do Is To Unbolt The Old Original Creality Plastic Extruder & Screw In The New "Metal Extruder" And Be Ready To Start Printing..
After-Sales Service-If You Have Any Unsolvable Problems During Installation And Use Of The 3D Printer Extruder, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Upgraded Performance-The Creality Ender 3 Upgrades Make It Have Better Stronger Pressure Pushing The Filament Into The Printer Nozzle, And Greatly Keeping The Metal Extruder Retaining Power In Filament Feed-In..
High Quality-40 Teeth Drive Gear Feeds The 1.75Mm Filament, Compatible With Pla/Abs/Wood/Tpu/Pteg. Made Of High-Quality Aluminum, Makes The Filament Loading Easier, With No Worries About Filament Scraping Or Breaking..
Features
- Wide Compatibility-The ender 3 extruder upgrade comes with the small pneumatic connector. This creality extruder feeder drive is compatible with nearly all models of 3D printers, no need to change stepper motors or other mounting hardware. Perfect fit for Creality Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5, Ender 5 Pro, CR-10, CR-10S 3D Printers.
- High Quality-40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG. Made of high-quality aluminum, makes the filament loading easier, with no worries about filament scraping or breaking.
- Easy To Install-Full metal aluminum alloy, DIY kit and you need to assemble by yourself. The Ender 3 metal extruder includes all the necessary screws & parts you needed. All you need to do is to unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and be ready to start printing.
- Upgraded Performance-The creality ender 3 upgrades make it have better stronger pressure pushing the filament into the printer nozzle, and greatly keeping the metal extruder retaining power in filament feed-in.
- After-Sales Service-If you have any unsolvable problems during installation and use of the 3d printer extruder, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Comgrow
See On Amazon #17
Creality Official Ender 3 Direct Drive Upgrade Kit, Comes with 42-40 Stepper Motor Hotend Kit, All Metal Structure, Support Flexible TPU Filament, 1.75mm Direct Drive Extruder Fan for Ender 3 Pro/3 V2
Asin: B0C4NY7RV2
【Easy To Install And Use】- Switching Bowden Extrusion Or Direct Extrusion At Any Time, The Direct Drive Extruder Is Easy To Disassemble. It Doesn't Affect The Inherent Function Of The Printer Because It's A Full Extrusion Kit..
【Professional Support】- To Ensure Your Pleasant Shopping Experience, Creality Has A Professional Customer Service Team To Solve Your Problems. If You Have Any Problems, Please Do Not Hesitate To Contact Us. We Will Provide Friendly And Fast Customer Service To Solve Your Problem Within 24 Hours..
【Wide Compatibility】- This Ender 3 Direct Drive Upgrade Kit Is Compatible With Ender 3, Ender 3S, Ender 3 Pro And Ender 3 V2. Supporting All 1.75Mm Diameter Filaments, Especially For Flexible Filaments Such As Tpu, Pla And Other Flexible Filaments..
【Smooth Feed-In】- Lower Torque Requirements On The Stepper Motor, Reducing The Possibility Of The Nozzle Blockage When Retracting Filament And Malfunction When Loading New Filament..
Features
- 2 in 1, All Metal Design - New upgraded high quality direct extruding kit. Creality Ender 3 direct drive combines the direct extruding kit and the complete nozzle kit. It's sturdy and wear-resistant with all metal shell and surface oxidation treatment. Integrated structure is convenient for wiring and replacing.
- Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament.
- Easy to Install and Use - Switching Bowden extrusion or direct extrusion at any time, The direct drive extruder is easy to disassemble. It doesn't affect the inherent function of the printer because it's a full extrusion kit.
- Wide Compatibility - This Ender 3 direct drive upgrade kit is compatible with Ender 3, Ender 3S, Ender 3 Pro and Ender 3 V2. Supporting all 1.75mm diameter filaments, especially for flexible filaments such as TPU, PLA and other flexible filaments.
- Professional Support - To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems. If you have any problems, please do not hesitate to contact us. We will provide friendly and fast customer service to solve your problem within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #18
Official Creality Ender 3 V3 SE 3D Printer, Upgraded Ender 3, 250mm/s 2500mm/s Fast 3D Printer, Auto Leveling, Direct Extruder, PC Spring Steel Bed, Auto-Load Filament, Print Size 8.66x8.66x9.84in
Asin: B0CK22DMXT
【Quick Assembly & Pc Spring Steel Build Plate】Creality Ender 3 V3 Se 3D Printer Equiped Pc Spring Steel Build Plate，The Pc Spring Steel Build Plate Is Sticky And Flexible, Making It Easy To Remove The Printed Models By Bending It Slightly. Creality Ender 3 V3 Se 3D Printer Preassembly Has Solved Those Hassles And Worries Of Parts Assembly, It Only Takes 3 Steps To Complete The Assembly, It Only Takes 20 Minutes From The Unpacking To The First Printing..
【Responsible After-Sales Service And Lifetime Technical Support】If You Have Any Problems About Official Creality Ender 3 V3 Se 3D Ptinter, Please Feel Free To Contact Us Through Amazon, We Will Quickly Respond Within 24 Hours..
【Auto Filament Loading & Unloading】The Creality Ender 3 V3 Se 3D Printer Tap "Extrude", And The Filament Will Flow Out Of The Nozzle Smoothly. Tap "Retract", And The Filament Will Exit Quickly. So, It Is Effortless To Replace The Filament..
【Sprite Direct Extruder & Hassle-Free Auto Leveling】Creality Ender-3 V3 Se "Sprite" Direct Extruder Works Well With Pla, Petg, And Flexible Tpu, Unlocking Your Creative Potential. And The Extruder Is Market-Proven For Its Reliability. Creality Ender-3 V3 Se Features A Cr Touch Sensor For Auto Leveling And A Strain Sensor For Auto Z-Offset, Making Leveling Much Easier..
Features
- 250mm/s 2500mm/s High Speed Printing & High Precision Quality Creality Ender 3 V3 SE supports a maximum printing speed of 250mm/s, 2500mm/s acceleration, saving 73% of the time compared with other regular 3D printers. The speed has been greatly improved while maintaining the printing quality.
- Sprite Direct Extruder & Hassle-free Auto Leveling Creality Ender-3 V3 SE Sprite direct extruder works well with PLA, PETG, and flexible TPU, unlocking your creative potential. And the extruder is market-proven for its reliability. Creality Ender-3 V3 SE features a CR Touch sensor for auto leveling and a strain sensor for auto z-offset, making leveling much easier.
- Quick Assembly & PC spring steel build plate Creality Ender 3 V3 SE 3D Printer equiped PC spring steel build plate The PC spring steel build plate is sticky and flexible, making it easy to remove the printed models by bending it slightly. Creality Ender 3 V3 SE 3D Printer Preassembly has solved those hassles and worries of parts assembly, It only takes 3 steps to complete the assembly, it only takes 20 minutes from the unpacking to the first printing.
- Auto Filament Loading & Unloading The Creality Ender 3 V3 SE 3D Printer Tap Extrude, and the filament will flow out of the nozzle smoothly. Tap Retract, and the filament will exit quickly. So, it is effortless to replace the filament.
- Responsible After-Sales Service and Lifetime Technical Support If you have any problems about Official Creality Ender 3 V3 SE 3D Ptinter, Please feel free to contact us through Amazon, we will quickly respond within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 9.00 x 22.00 x 15.00 inches | Weight: 15.77 Pounds
Warranty: 1 Year Warranty
See On Amazon #19
Sovol SV04 IDEX 3D Printer, Independent Dual Extruder 3D Printer with All Metal Direct Drive 32-bit Silent Motherboard Auto Leveling, Larger Build Volume 300 x 300 x 400mm
Asin: B09MLSSKRD | Model: SV-SV04 | PartNumber: SV-SV04
[Auto Leveling & 32-Bit Tmc2209 Silent Board] - The Automatic Leveling Sensor On The Sv04 Makes Adjustments To Ensure That The Bed And Nozzle Are At An Optimal Distance Throughout The Printing Process, Which Improves Bed Adhesion And Print Quality. If You Have Any Bed Leveling Issues Please Refer To The User Guide And Leveling Guide Video On This Product Page. Upgraded 32-Bit Tmc2209 Silent Board, Up To 7 Additional Drivers, More Functions, More Stable, Super Quiet..
[Fully Upgraded 4.3 Inch Lcd Touchscreen] - The Upgraded Lcd Touch Screen From Sovol Has An Excellent Day/Night Mode And One-Button Control. The Sv04 Touch Screen Can Be Set To Automatically Replace The Filament Without Printing Paused. All Modes Are Clear And Easy To Use. Double Filament Detector Reminds You To Replace Filament, No More Worrying About Long Time Printing..
[Flexible Spring Steel Plate & 500W Power Supply] - The Flexible Magnetic Building Plate Ensures That Your Prints Grips Well To Avoid Deformation And Failed Prints. You Can Peel Off The Prints Without Tools, Just Bend The Plate And Remove Your Prints. Built-In 500W Branded Power Supply Ensures Stable And Sufficient Performance, Fast Heat Hot Bed And Nozzle. It Protects Sv04 From Unexpected Power Surges..
[More Space For Creativity] - Please Download The Latest Firmware For Sv04 From The Official Website Of Sovol Before Starting. Sovol Sv04 Size: 300 X 300 X 400 Mm. Larger Volume Than Sv01/Sv02. Modular Design For Quick Assembly Allows For Faster Start..
Features
- [IDEX 3D Printer with 4 Different Printing Modes] - Sovol SV04 3D printer is equipped with independent dual direct drive metal extruders that allow you to print two different colors, two different materials and two models simultaneously in the same or opposite direction. Better able to produce high-quality prints with a variety of materials such as PLA, ABS, PETG, TPU, PC, PA, wood, ASA and PVA.
- [More Space for Creativity] - Please download the latest firmware for SV04 from the official website of sovol before starting. Sovol SV04 size: 300 x 300 x 400 mm. Larger volume than SV01/SV02. Modular design for quick assembly allows for faster start.
- [Auto Leveling & 32-bit TMC2209 Silent Board] - The automatic leveling sensor on the SV04 makes adjustments to ensure that the bed and nozzle are at an optimal distance throughout the printing process, which improves bed adhesion and print quality. If you have any bed leveling issues please refer to the User Guide and leveling guide video on this product page. Upgraded 32-bit TMC2209 silent board, up to 7 additional drivers, more functions, more stable, super quiet.
- [Flexible Spring Steel Plate & 500W Power Supply] - The flexible magnetic building plate ensures that your prints grips well to avoid deformation and failed prints. You can peel off the prints without tools, just bend the plate and remove your prints. Built-in 500W branded power supply ensures stable and sufficient performance, fast heat hot bed and nozzle. It protects SV04 from unexpected power surges.
- [Fully Upgraded 4.3 inch LCD Touchscreen] - The upgraded LCD touch screen from Sovol has an excellent day/night mode and one-button control. The SV04 touch screen can be set to automatically replace the filament without printing paused. All modes are clear and easy to use. Double filament detector reminds you to replace filament, no more worrying about long time printing.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Dimensions: 15.75 x 11.81 x 11.81 Inches
Warranty: 1 Year
See On Amazon #20
Official Upgraded Ender 3 v2 Ender 3 CR-10 All Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Creality Ender 3 Pro/Ender 5/ CR-10 Series 3D Printer
Asin: B07WKTVNCW | Model: Gray Extruder | PartNumber: Gray Extruder
Compatible With Pla/Abs/Wood/Tpu/Pteg, 40 Teeth Drive Gear Feeds The 1.75Mm Filament Very Smoothy..
100% Brand New And Original Creality Exturder. If You Have Any Question, Please Feel Free To Contact Us..
Easy To Install. The Extruder Diy Kit Comes With A Instruction On How To Put It Together, Which Makes It More Easy To Install..
Works Better Than Original Plastic Stock Extruder, Make Loading Filament Much Easier. Even Smoother Than The Red Metal Extruder..
Features
- The gray metal extruder is an original upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
- Works better than original plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder.
- Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy.
- Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install.
- 100% brand new and original Creality exturder. If you have any question, please feel free to contact us.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon
Looking For Something Else?
Search