PEI Sheet(Double-Sided)310mm*320mm and Magnetic Sticker with Adhesive for Creality CR-10S Pro,CR-X,CR-10 Pro V2,Ender 3 Max,CR-10 V3 3D Printer
Asin: B0CB8QGQ2R | Model: PEI 320 | PartNumber: PEI 320 | Ean: 0795847035505 | UPC: 795847035505
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【More Affordable And Practical】 Our Pei Sheet Is Made With 75% Thicker Pei And 25% Thicker Spring Steel Than Our Leading Competitors, Providing A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. Our Magnet Can Also Sustain Higher Temperatures Of Up To 120°C, Making It Wear-Resistant And Scratch-Resistant. Additionally, It's Easy To Clean With A Protective Film On The Surface Of The Composite Coating That Is Anti-Scratch And Dustproof..
【Easy Removal】When Used In A 3D Printing Application,Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print.Our Surface Is Easily Removed And Flexible,Allowing Prints To Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature.After The Model Printing Is Complete,Simply Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface, And Watch The Model Fall Right Into Your Hands..
【Simple Installation】 Our Pei Sheet Is Easy To Install. Simply Stick The Magnetic Bottom Sheet Onto Your Chosen Build Plate, And Then Place The Steel Platform With Pei Surface On Top. Easily Replaces An Ender 3 Max Bed, Cr 10S Pro Bed, Or Any Other Type Of Platform.Our Pei Sheet Is Flexible, Removable, And Sticks To Magnetics Very Well. It's Made With High Strength And Heat Resistance Materials, Including Spring Stainless Steel And Pei Powder Sprayed On The Surface..
【Excellent Adhesion】 Our Pei Sheet Provides Excellent Adhesion For Your Prints, Allowing Them To Stick Securely To The Printing Surface While Still Being Easy To Remove. Our Pei Sheet Is Compatible With Various Bed Types, Including The Cr-10S Pro Bed, Cr-X Bed,Cr-10 Pro V2 Bed, Ender 3 Max Bed, Cr-10 V3 Bed, And Any Similarly Sized 3D Printer Bed. You Can Print Directly Onto Each Side Of The Double-Sided Sheet Without The Need For Glue Or Any Other Adhesives..
Features
- Wide Application Our PEI sheet is 310mm x 320mm, For CR-10S Pro,CR-X,CR-10 Pro V2,Ender 3 Max,CR-10 V3 and similarly sized FDM 3D printers. Our PEI sheet is also compatible with various build plate types, Compatible with PLA, PETG, PEEK, ABS, and any other filaments.
- Excellent Adhesion Our PEI sheet provides excellent adhesion for your prints, allowing them to stick securely to the printing surface while still being easy to remove. Our PEI sheet is compatible with various bed types, including the CR-10S Pro bed, CR-X bed,CR-10 Pro V2 bed, Ender 3 Max bed, CR-10 V3 bed, and any similarly sized 3D printer bed. you can print directly onto each side of the double-sided sheet without the need for glue or any other adhesives.
- More Affordable and Practical Our PEI sheet is made with 75% thicker PEI and 25% thicker spring steel than our leading competitors, providing a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of up to 120 C, making it wear-resistant and scratch-resistant. Additionally, it's easy to clean with a protective film on the surface of the composite coating that is anti-scratch and dustproof.
- Simple Installation Our PEI sheet is easy to install. Simply stick the magnetic bottom sheet onto your chosen build plate, and then place the steel platform with PEI surface on top. Easily replaces an Ender 3 Max bed, CR 10S Pro bed, or any other type of platform.Our PEI sheet is flexible, removable, and sticks to magnetics very well. It's made with high strength and heat resistance materials, including spring stainless steel and PEI powder sprayed on the surface.
- Easy Removal When used in a 3D printing application,PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.Our surface is easily removed and flexible,allowing prints to come off the surface easily when the temperature of the heated bed reaches room temperature.After the model printing is complete,simply remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- See more on Amazon...
First Available: 08/24/2023
Brand: UNIDO | Manufacturer: YOOPAI
Warranty: 180
See On Amazon Similar To PEI SheetDoubleSided310mm320mm and Magnetic Sticker
#1
Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface
Asin: B092ZVTJSK | Model: 001 | PartNumber: 001 | Ean: 0752004396282 | UPC: 752004396282
【Wide Application】The Pei Printing Surface Can Compatible With Pla, Petg, Peek, Abs And Any Other Filaments. Perfect Printing Size Works Well With Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To Be Compatible With Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke Ender 3 V3 K1 K1c, Please Remove The Two Positioning Screws On The Hotbed First.).
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" To Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Simple Installation】Just Need To Place The Bottom 3M Adhesive Surface On Top Of The No-Heated Bed. The Steel Pei Plate Can Be Magnetically Bonded To The Magnetic Sticker. If It Fails To Adsorb, Please Rotate It 90 Degrees And Try Again..
【Easy Adhere And Remove】 Easy To Adhere The Filaments To The Printing Bed. No Need For Tape And Glue Which Release Your Printing Anxiety. Easy To Remove The Prints Just Take Out The Pei Sheet And Slightly Flex It Repeatedly To Pop Your Prints Right Off..
Features
- Quality security Creality 100% official, made of high-quality spring steel, the flexible Steel PEI Sheet won't kink or warp when flex. It can stick well to the magnetic base, can resistant to 200 C and high strength no deformation. The soft Magnetic Sticker can withstand a long time of work with the heated bed at a high temperature of 70 C.
- Easy Adhere And Remove Easy to adhere the filaments to the printing bed. No need for tape and glue which release your printing anxiety. Easy to remove the prints just take out the PEI sheet and slightly flex it repeatedly to pop your prints right off.
- Wide Application The PEI Printing Surface can compatible with PLA, PETG, PEEK, ABS and any other filaments. Perfect printing size works well with Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE Ender 3 V3 K1 K1C, please remove the two positioning screws on the hotbed first.)
- Simple Installation Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question to find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #2
PEI Sheet 235mmx235mm and Magnetic Sticker with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro/Voxelab Aquila 3D Printer
Asin: B0BRCRX6T9 | Model: PEI-1230 | PartNumber: PEI-1230 | Ean: 0783970029096 | UPC: 783970029096
【Simple Installation】The Ender 3 V2 Pei Sheet Is Combined With 2 Parts, A Flexible Steel Platform Textured Pei Surface On One Side, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top.Spring Stainless Steel, Pei Powder Sprayed On The Surface, Golden Yellow On The Back. Flexible, Removable, And Can Stick To Magnetics Very Well. High Strength And Heat Resistance..
【Wide Application】The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). After Installing The Print Bed, Please Re-Level It To Improve The Printing Effect. , It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 Pro,Ender 3 Neo,Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers.Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
【More Affordable And Practical】 We Use 75% Thicker Pei And 25% Thicker Spring Steel Than Our Leading Competitors. This Means A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. Our Magnet Can Also Sustain Higher Temperatures Of 120°C，Wear-Resistant And Scratch-Resistant, Easy To Clean: There Is A Protective Film On The Surface Of The Composite Coating, Which Is Of Anti-Scratch And Dustproof, Etc..
【Easy Removal】When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print.This Surface Is Easily Removed And Flexible. Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Features
- Excellent Adhesion Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet.
- Easy Removal When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- Simple Installation The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance.
- More Affordable and Practical We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120 C Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- Wide Application The size of Ender 3 PEI is 235*235mm 9.25*9.25inch). After installing the print bed, please re-level it to improve the printing effect. , it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- See more on Amazon...
First Available: 12/30/2022
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 8.27 x 8.27 x 4.33 inches
Warranty: 2 years
See On Amazon #3
Creality Official Double Sided PEI Sheet and Magnetic Sticker 235*235mm, Golden PEI Smooth + Textured Spring Flexible Build Plate for 3D Printer Ender-3/3 S1/3 S1 Pro/5S1 Ender-3 Neo/3 V2 Neo/3 V3 SE
Asin: B0BCGFLJHD | Model: 3D-Double-PEI-G | PartNumber: 3D-Double-PEI-G
【More Stable Molding】The High-Strength Spring Steel Plate Is Only 0.4Mm Thick, And The Strong Magnetic Stickers Can Maintain High Magnetic Properties Under High Temperature, Which Reduces The Inertia Of The Platform Movement During Printing And Help The 3D Printer Run Smoothly..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Easy To Remove】With A Magnetic Printing Pei Sheet Plate, You Only Need To Remove It From The Bed And Bend It, Then The Model Can Be Removed. When You Let Go, They Just Return Back To Shape And Will Not Break Easily. No Need To Scratch, Pry And Damage Your Prints!.
【Double Sided】Two Different Build Surfaces Meet Different Printing Needs. One Side Is Pel Film With Smooth Surface, And Has A Good Effect On The Model Bottom Surface; Another Side Is The Golden Textured Pei Has High Adhesion, And The Model Is Not Easy To Warp. The Double-Sided Build Plate Combines The Advantages Of The Textured/Smooth Pel And Can Be Switched Freely..
Features
- Quality assurance 100% Official Creality 3D printer PEI Sheet double sided removable magnetic flexible heated bed platform. Gold PEI surface is of strong high temperature stability, flame retardant, heat resistance, high strength, wear resistance and good printing stability.The spring steel plate not only has high flatness but also has good elasticity, it is not deformed after repeated bending.
- Double Sided Two different build surfaces meet different printing needs. One side is PEl film with smooth surface, and has a good effect on the model bottom surface; Another side is the golden textured PEI has high adhesion, and the model is not easy to warp. The double-sided build plate combines the advantages of the textured/smooth PEl and can be switched freely.
- More Stable Molding The high-strength spring steel plate is only 0.4mm thick, and the strong magnetic stickers can maintain high magnetic properties under high temperature, which reduces the inertia of the platform movement during printing and help the 3D printer run smoothly.
- Easy to remove With a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the model can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints!
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #4
Gizmo Dorks PEI Sheet 3D Printer Build Surface 300mm x 300mm (11.8" x 11.8") with Laminated 3M 468MP Adhesive, Made in The USA
Asin: B07FVL1SYF | Model: GD-PEI3M-300MM | PartNumber: GD-PEI3M-300MM | Ean: 0887503182125 | UPC: 887503182125
Build Surface - Pei Is The Perfect No Prep Build Surface Which Is Endlessly Reusable For Multiple Prints; Clean With Isopropypl Alcohol Between Prints (Or With Acetone On A Cold Bed).
Dimensions: 300Mm X 300Mm / Pei Thickness: 0.56Mm (0.022 Inches) / Laminated 3M 468Mp Adhesive Thickness: 0.13Mm (0.005 Inches).
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry.
Bubble Free Application - The 3M 468Mp Adhesive Is Already Preapplied To The Pei; Simply Peel Back The Tape Liner For Quick Adhesion To The Bed.
Features
- Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass)
- Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed
- Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed)
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
- Dimensions: 300mm x 300mm / PEI thickness: 0.56mm (0.022 inches) / Laminated 3M 468MP adhesive thickness: 0.13mm (0.005 inches)
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.03 x 11.80 x 11.80 inches
See On Amazon #5
SUNLU 3D Printer Bed,PEI Magnetic Build Textured Surface, Gold Frosted PEI Sheet for 3D Printers, 9.25x9.25inchs (235x235mm), 2 PCS PEI Sheet Black+Gold +1 PC Base Sticker Sheet
Asin: B0BWXGHC4K
③【Durability Easy To Clean 】Sunlu Pei Magnetic Build Plate Has Long Service Life Of Stainless Steel.Sunlu Pei 3D Printer Bed Adhesive Use A Soft Cloth To Clean The Dust. Gently Wipe The Stain With Low Concentration Of Alcohol..
⑤【Super Easy Print Removal】 Sunlu 3D Printer Platforms Pei Is Flexible And Magnetic, Making It Easy To Move Off The Platform And Take Away The Printing Model. The Prints Are Pretty Easy To Remove Once You're Done Printing..
④【Stronger Magnetic Ddhesion】Sunlu Pei 3D Printer Bed More Flexible And Resistant To Bending.Great First-Layer Adhesion,Make Sure The Model Can Be Firmly Attached To The Surface Of The Print Platform.Sunlu Magnetic 3D Printer Bed Platforms Had Solid Adhesion And The Print Went Well..
②【Frosted Surface】Sunlu Pei Magnetic Sheet Printing Board Has Smooth Surface, Which Will Not Leave Any Trace On The Bottom Of The Printed Material. There Is A Good Combination Of Hot Melt Material And Printing Layer, Which Can Reduce The Deformation Caused By Shrinkage And Avoid Warping..
Features
- Packing List (3PCS) SUNLU 3D printer PEI magnetic build plate size 235*235mm 9.25*9.25inch . 3 pieces sheet in total: 2 pieces of PEI Print Surface Sheet Gold+Black and 1 piece of sticker base sheet.
- Frosted Surface SUNLU PEI magnetic sheet printing board has smooth surface, which will not leave any trace on the bottom of the printed material. There is a good combination of hot melt material and printing layer, which can reduce the deformation caused by shrinkage and avoid warping.
- Durability Easy to Clean SUNLU PEI magnetic build plate has long service life of stainless steel.SUNLU PEI 3d printer bed adhesive use a soft cloth to clean the dust. Gently wipe the stain with low concentration of alcohol.
- Stronger Magnetic Ddhesion SUNLU PEI 3d printer bed more flexible and resistant to bending.Great first-layer adhesion,make sure the model can be firmly attached to the surface of the print platform.SUNLU magnetic 3D printer bed platforms had solid adhesion and the print went well.
- Super Easy Print Removal SUNLU 3d printer platforms PEI is flexible and magnetic, making it easy to move off the platform and take away the printing model. The prints are pretty easy to remove once you're done printing.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
See On Amazon #6
Gizmo Dorks PEI Sheet 3D Printer Build Surface 310mm x 320mm Compatible for CR-10S Pro or Pro V2, Made in The USA
Asin: B0866BV7KJ | Model: GD-PEI3M-310-320 | PartNumber: GD-PEI3M-310-320 | Ean: 0887503183269 | UPC: 887503183269
Build Surface - Pei Is The Perfect No Prep Build Surface Which Is Endlessly Reusable For Multiple Prints; Clean With Isopropypl Alcohol Between Prints (Or With Acetone On A Cold Bed).
Pei Dimensions: 310Mm X 320Mm X 0.56Mm / Laminated 3M 468Mp Adhesive Thickness: 0.13Mm (0.005 Inches) / Fits The Creality Cr-10S Pro V2, Ender 3 Max, And Other Printers Perfectly.
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry.
Bubble Free Application - The 3M 468Mp Adhesive Is Already Preapplied To The Pei; Simply Peel Back The Tape Liner For Quick Adhesion To The Bed.
Features
- Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass)
- Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed
- Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed)
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
- PEI Dimensions: 310mm x 320mm x 0.56mm / Laminated 3M 468MP adhesive thickness: 0.13mm (0.005 inches) / Fits the Creality CR-10S Pro v2, Ender 3 Max, and other printers perfectly
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.03 x 12.60 x 12.20 Inches | Weight: 0.23 Pounds
See On Amazon #7
Double Sided Textured PEI Sheet, 3D Printer Parts Printing Plate Frosted PEI Surface 310 x 310 mm for CR-10 CR-10S Anet A8+, E12,3D Printers(Without Magnetic Bottom Sheet)
Asin: B09YY4L4K1 | Model: MY001 | PartNumber: MY001 | Ean: 0705548422535 | UPC: 705548422535
【High Temperature Resistance】:Genuine Pei Powder Coating Is Heat Resistant Which Temperature Resistance Can Be Up To 200℃ With No Deformation.
【Easy To Use】Pei Spring Steel Easy To Remove The Plastic Parts By Bending And Popping It Off When Cooling, Easy To Print, Easy To Maintain.
【Textured Surface】:The Textured Side Makes The Bottom Of The Prints Show A Matte Texture And Retain The Frosted Feeling.And Perfect For Pla/Abs/Tpu/Pefg/Nylon..
【Double-Sided】】:Pei Magnetic Flexible Bed Has Double-Sided Pei Coating, Both Sides Can Be Used..
Features
- Upgrade PEI Sheet :310mm x 310mm/12.2x12.2 inch, compatible with CR-10 10S Pro CR-X MP Maker Pro, Long LK1/ PRO LK5 PRO/Artilery X1ease measure your bed, not rely on build volume/printing size.
- Double-sided :PEI magnetic Flexible bed has double-sided PEI coating, both sides can be used.
- High Temperature Resistance :Genuine PEI powder coating is heat resistant which temperature resistance can be up to 200 with no deformation
- Textured Surface :The textured side makes the bottom of the prints show a matte texture and retain the frosted feeling.And perfect for PLA/ABS/TPU/PEFG/Nylon.
- Easy to use PEI Spring steel Easy to remove the plastic parts by bending and popping it off when cooling, easy to print, easy to maintain
- See more on Amazon...
Brand: MYOSOTIS | Manufacturer: china
See On Amazon #8
HICTOP Double Sided PEI Sheet 310x310mm Smooth/Textured Magnetic Sheet with Adhesive for CR-10 CR-10S Artillery SW-X1, SW-X2 3D printers
Asin: B08PFH3G82 | Model: PEI 235*235 | PartNumber: PEI 235*235
3.Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On The Hictop Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well, But The Temperature Of The Hotbed Needs To Be About 80-85℃.
5.The Size Of Hictop Pei Sheet Is 310X310mm（12.2*12.2Inch), It Is Applicable With Cr-10, Cr-10S,Tenlog D3 Pro,Longer Lk1, Artillery Sw-X1, Sw-X2 And Other Same Sized 3D Printers.
4.Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Gentle Flexing Of The Plate Will Help Remove It..
2.The Hictop Textured Pei And The Smooth Pei Sheet Are Very Easy To Use, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top. The Maximum Temperature For Printing Is 130℃ On The Bed..
Features
- 1.The HICTOP double sided PEI sheet is combined with 2 parts, a flexible steel platform coated with textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.
- 2.The HICTOP textured PEI and the smooth PEI sheet are very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130 on the bed.
- 3.Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85
- 4.Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
- 5.The size of HICTOP PEI sheet is 310x310mm 12.2*12.2inch), it is applicable with CR-10, CR-10S,Tenlog D3 pro,Longer LK1, Artillery SW-X1, SW-X2 and other same sized 3D printers
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
See On Amazon #9
3D Printer 120x120mm PEI Spring Steel Build Plate, Double Sided Textured Flex PEI Sheet with Magnetic Bottom with Adhesive (4.7x4.7 inch) for Voron 0.1 V0 3D Printer.
Asin: B09TXM7VFC | Model: 20220305 | PartNumber: 20220305
【Good Quality】: Flexible, Removable, High Strength And Heat Resistance, Three-Layer Design, Thicker And More Durable. Easily Handle Temperatures Up To 130°C. And Perfect For Pla, Peek, Abs.Note:The Adaptation Temperature Of Different Materials Is Different, Please Adjust It Reasonably..
【Quality Promise】: All Products Have Undergone Quality Inspection Before Delivery. If You Have Any Questions About Product Quality And Suggestions, Please Feel Free To Contact Us And We Will Reply Within 24 Hours..
【Practical Features】:Size:120X120mm/4.7X4.7 Inch Is Suitable For Voron 0.1 V0 And The Same Size Other 3D Printers.If You Are Not Sure, You Can Contact Us To Communicate And Confirm..
【Proven Solution】:No Glue, No Tap, When Hotbed Temperature Reaches 60℃ ,Materials Such As Pla Abs Will Stick Well, And After Printing, When Spring Steel Ender 5 Plus Pei Build Plate Cools To Room Temperature, It's Easy To Remove The Printed Matter From The Platform By Bending Slightly. Through Hundreds Of Experimental Tests, Repeated Use Is Still As New..
Features
- Special Design : Compared with smooth PEI, the design of flexible steel bed with Double Sided Textured PEI surface is excellent. The matte texture makes it easier for the printing material to adhere to the surface of PEI. Note: Please measure the size of your printing platform before purchasing. We are very grateful for your love and care for the product.
- Proven Solution :No glue, No tap, when hotbed temperature reaches 60 ,materials such as PLA ABS will stick well, and after printing, when spring steel ender 5 plus PEI build plate cools to room temperature, it's easy to remove the printed matter from the platform by bending slightly. Through hundreds of experimental tests, repeated use is still as new.
- Good Quality : Flexible, removable, high strength and heat resistance, Three-Layer design, thicker and more durable. Easily handle temperatures up to 130 C. And perfect for PLA, PEEK, ABS.Note:The adaptation temperature of different materials is different, please adjust it reasonably.
- Practical Features :Size:120x120mm/4.7x4.7 inch is suitable for Voron 0.1 V0 and the same size other 3D printers.If you are not sure, you can contact us to communicate and confirm.
- Quality Promise : All products have UNDERGONE QUALITY INSPECTION before delivery. If you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours.
- See more on Amazon...
Brand: G-Hubble | Manufacturer: G-Hubble
Dimensions: 0.07 x 4.70 x 4.70 inches
See On Amazon #10
CCTREE Double-Sided Textured and Smooth PEI Sheet, Flexible PEI Spring Steel Build Plate Removable Platform Board with Magnetic Base for Creality Ender 3 Max/CR-10S Pro, Kobra Plus, 310x320mm
Asin: B0B8VX4GGP | Ean: 0738627015014 | UPC: 738627015014
【Excellent Adhesion】: Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double-Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature. It Also Can Print Petg Very Well, But The Temperature Of The Hotbed Needs To Be About 80-85℃.
【Easy Removal】:His Surface Is Easily Removed And Flexible. Prints Come Off The Surface Easily When The Heated Bed Temperature Reaches Room Temperature. If The Print Is Still Stuck, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface, And Watch The Model Fall Right Into Your Hands..
【Compatibility】The Size Of Pei Sheet Is 310*320Mm,It Is Suitable For Creality Cr-10S Pro / V2 / V3, Ender 3 Max, Anycubic Mega X And Other 3D Printers. If Your 3D Printer Has A 310X320mm Heat Bed Platform, This Pei Sheet Is Compatible With Your 3D Printer..
【Textured/Smooth Double-Sided Pei】:Our Double-Sided Pei Flex Plate Features One Powder-Coated Pei Surface That Leaves A Textured Matte Finish On Your Parts And One Smooth Pei End That Leaves A Glossy, Reflective Finish On The Bottom Of Your Interests!.
Features
- Simple Installation Stick the soft magnetic base to the heating bed of your 3D printer then put the stacked PEI steel foil platform on top and you are ready to use. the PEI surface sticks to the magnet almost too well, it makes it so easy to switch between smooth bottom surfaces and textured bottom surfaces.
- Textured/Smooth Double-Sided PEI :Our double-sided PEI flex plate features one powder-coated PEI surface that leaves a textured matte finish on your parts and one smooth PEI end that leaves a glossy, reflective finish on the bottom of your interests!
- Excellent Adhesion : Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double-sided PEI sheet without using any glue or other tools to help the model stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85
- Compatibility The size of PEI sheet is 310*320mm,It is suitable for Creality CR-10S Pro / V2 / V3, Ender 3 Max, AnyCubic Mega X and other 3D printers. If your 3D printer has a 310x320mm heat bed platform, This PEI sheet is compatible with your 3D printer.
- Easy Removal :his surface is easily removed and flexible. Prints come off the surface easily when the heated bed temperature reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- See more on Amazon...
Brand: CCTREE | Manufacturer: CCTREE
See On Amazon #11
Gizmo Dorks PEI Sheet 3D Printer Build Surface 235mm x 235mm (9.3" x 9.3") with Preapplied Laminated 3M 468MP Adhesive for Creality Ender 3 or CR 20 | Made in The USA
Asin: B07GSJSDWR | Model: GD-PEI3M-235MM | PartNumber: GD-PEI3M-235MM | Ean: 0887503182606 | UPC: 887503182606
Build Surface - Pei Is The Perfect No Prep Build Surface Which Is Endlessly Reusable For Multiple Prints; Clean With Isopropypl Alcohol Between Prints (Or With Acetone On A Cold Bed).
Dimensions: 235 X 235Mm / Pei Thickness: 0.56Mm (0.022 Inches) / Laminated 3M 468Mp Adhesive Thickness: 0.13Mm (0.005 Inches) / Fits The Creality Ender 3 Or Creality Cr 20 Perfectly!.
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry.
Bubble Free Application - The 3M 468Mp Adhesive Is Already Preapplied To The Pei; Simply Peel Back The Tape Liner For Quick Adhesion To The Bed.
Features
- Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass)
- Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed
- Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed)
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
- Dimensions: 235 x 235mm / PEI thickness: 0.56mm (0.022 inches) / Laminated 3M 468MP adhesive thickness: 0.13mm (0.005 inches) / Fits the Creality Ender 3 or Creality CR 20 perfectly!
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.03 x 9.25 x 9.25 inches | Weight: 0.13 pounds
See On Amazon #12
Geeetech PEI Sheet 310x310mm, Double Textured Surface Magnetic Build Plate, Flexible Removable Spring Steel with Adhesive for Creality CR-10 CR-10S/10 S3, Sidewinder X1/X2 S8 Pro S8 Plus KP5L SP-5
Asin: B09MKKW9TX
【Simple Installation】This 3D Printer Bed Consists Of Two Parts,One Sheet Of Magnetic Base And One Sheet Of Pei-Coated Frosted Spring Steel Platform. Just Need To Place The Bottom 3M Adhesive Surface To Your Heated Bed, Pei Bed Can Be Magnetically Bonded..
【Wide Application】The Size Of Pei Sheet Is 310*310Mm *4.06Mm(12.2*12.2Inch), It's Suitable For Geeetech A30, A30m, A30t, A30 Pro And Creality Cr-10, Cr-10S, Sidewinder X1/X2 S8 Pro S8 Plus Kp5l Sp-5 X40v2 Tevo Tornado, Anet A8, E12, Mp Maker Pro And Other Same Sized 3D Printers, Compatible With Pla, Petg, Peek, Abs 3D Printer Filaments..
【Easy To Adhere And Remove】This Cr-10 Pei Build Plate Surface Has Excellent Adhesion, Easy To Stick And Remove, No Glue And Shovel Required, And When The Build Surface Cools To Room Temperature, Prints Can Be Removed By Bending The Steel Plate Slightly.
【High-Quality Spring Steel】 Hardened Steel Spring Plate Has No Curling Edges, It Has Extremely High Magnetic Properties, Can Be Well Adhered To The Magnetic Base, Cr 10 Pei Sheet Can Withstand Numerous Thermal Cycles Of The Print Bed Without Deformation.
Features
- Textured Surface The golden yellow matte surface with PEI powder coating has strong heat resistance, flame resistance, abrasion resistance and high print stability. The max temp for printing on the bed can reach 130 C, and the best adhesion is around 60 C
- High-quality Spring Steel Hardened steel spring plate has no curling edges, it has extremely high magnetic properties, can be well adhered to the magnetic base, CR 10 PEI sheet can withstand numerous thermal cycles of the print bed without deformation
- Simple Installation This 3d printer bed consists of two parts,one sheet of magnetic base and one sheet of PEI-coated frosted spring steel platform. Just need to place the bottom 3M adhesive surface to your heated bed, PEI bed can be magnetically bonded.
- Easy to Adhere and Remove This cr-10 pei build plate surface has excellent adhesion, easy to stick and remove, no glue and shovel required, and when the build surface cools to room temperature, prints can be removed by bending the steel plate slightly
- Wide Application The size of PEI sheet is 310*310mm *4.06mm(12.2*12.2inch), It's suitable for Geeetech A30, A30M, A30T, A30 PRO and Creality CR-10, CR-10S, Sidewinder X1/X2 S8 Pro S8 Plus KP5L SP-5 X40V2 Tevo Tornado, Anet A8, E12, MP Maker Pro and other same sized 3D Printers, Compatible with PLA, PETG, PEEK, ABS 3d printer filaments.
- See more on Amazon...
Brand: GIANTARM | Manufacturer: GIANTARM
See On Amazon #13
POJECITY 3D Printer PEI Sheet Dual Sided Flex Steel Bed 310 x 310mm with PEI+Magnetic Surface Printing Hotbed Parts for MEGA X CR 10
Asin: B09QQCTLXD | Model: W5 | PartNumber: W5 | Ean: 0746197528216 | UPC: 746197528216
High Quality Pei Sheet: The Custom-Designed Textured Pei Material Let’S Your Prints Easily Adhere To The Flexible Surface..
We Have Applied Pei On The Steel Plate By Machine, So You Don't Need To Worry About The Performance. If You Receive The Package But Find The Air Bubbles Or Scratches, They Are Only On The Surface And Won’T Effect Printing Performance. The Pei Is Textured, So Scratches Over Time From Printing Will Not Show Up In Your Print. The Textured Surface Leaves An Eye Catching, Professional Finish To Your Print..
When Printing Is Complete, Let The Pei Sheet Cool Down Enough (To Around 40C), Then Easily Remove The Prints. If The Print Is Still Stuck, Just Gently Bend The Steel Plate And Pop It Off! After Many Times Printings, Lightly Scour The Surface Of The Pei With Some Mild Steel Wool With 400 Grit Will Have Great Adhesion Or Use Alcohol To Clear It And Let It Dry..
Easy To Install: Made Of High Quality Stainless Steel And Strong Magnetic Base, Stick The Magnetic Base To Your Pei Sheet By Peeling Off The Backing Paper And Sticking It To Your Bed, Then Place The Steel Plate Onto The Magnetic Sheet. Keep The Side With Pei Facing Up To Print On. Please Peel Off The Protective Film On The Surface Before Printing..
Features
- Size: PEI Sheet 310mmx310mm/12.2x12.2 inch for Makebot Replicato QID X-Pro FlashFoge Creator MEGA X Ender 3 Max CR 10
- Easy to install: Made of high quality stainless steel and strong magnetic base, stick the magnetic base to your PEI Sheet by peeling off the backing paper and sticking it to your bed, then place the steel plate onto the magnetic sheet. Keep the side with PEI facing up to print on. Please peel off the protective film on the surface before printing.
- High quality PEI Sheet: The custom-designed textured PEI material let s your prints easily adhere to the flexible surface.
- When printing is complete, let the PEI Sheet cool down enough (to around 40C), then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off! After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.
- We have applied PEI on the steel plate by machine, so you don't need to worry about the performance. If you receive the package but find the air bubbles or scratches, they are only on the surface and won t effect printing performance. The PEI is textured, so scratches over time from printing will not show up in your print. The textured surface leaves an eye catching, professional finish to your print.
- See more on Amazon...
Brand: POJECITY | Manufacturer: R6
Weight: 2.20 pounds
See On Amazon #14
ENOMAKER PEI Spring Steel Magnetic Double Sided Bed Sheet Smooth and Textured Platform Removable Flexible Bed Sticker Build Surface for for Creality CR-10 V3/CR-10S Pro & V2/Ender 3 Max/CR-X,310x320mm
Asin: B0BDLF4XZQ | Model: ENO-Dual-PEI-310x320 | PartNumber: ENO-Dual-PEI-310x320 | Ean: 0764481225627 | UPC: 764481225627
【Bend To Remove Models】No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety..
When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
【Bends Thousands Of Times Without Deformation】The Flex Spring Steel Pei Bed Is Made Of High Quality Spring Steel That Won't Kink Or Warp When You Flex Them, They Just Return Back To Shape!.
【Double Sided Texture + Smooth Pei Sheet】One Side Frosted, One Side Smooth, Two Kinds Of Surface To Meet Your Different Printing Needs！Good Adhesion To The Pei Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off..
Features
- Magnetic, Flexible, Removable Steel Flex PEI Plate It can stick to magnetics very well. High strength and heat resistance. Suitable for Creality CR-10 V3/CR-10S Pro & V2/Ender 3 Max/CR-X etc.
- Double Sided Texture + Smooth PEI Sheet One side frosted, one side smooth, two kinds of surface to meet your different printing needs Good Adhesion to the PEI surface, easy to remove the prints, flex slightly to pop your print right off.
- Bend to Remove Models No more tape, no more glue, no more shovel, and release your printing anxiety.
- Bends thousands of Times without Deformation The flex spring steel PEI bed is made of high quality spring steel that won't kink or warp when you flex them, they just return back to shape!
- When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3d print bed goes through from print to print.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #15
IdeaFormer Coated Textured PEI Sheet + Smooth Carbon Fiber PET 310x310mm Flexible Sheet Hotbed Plate Work for Artillery SW-X1/X2, Anet A8 Plus,Ender 3 Max CR10 3D Printer (Without Magnetic Base)
Asin: B0BQBPMX6R | Model: 1111HJGJ | PartNumber: 1111HJGJ
[Easy To Install] First Stick The Soft Magnetic Base To The Heating Bed Of Your 3D Printer, Then Put The Stacked Pet Steel Foil Platform On Top And You Are Ready To Use. The Pet Surface Sticks To The Magnet Almost Too Well, It Makes It Easy To Switch Between Smooth Bottom Surfaces And Textured Bottom Surfaces..
[Compatibility] The Size Of Pet Sheet Is 310*310Mm, Not Warped. It Is Compatible With Most Printers On The Market With A Build Size Of 310*310Mm. It Is Suitable For Cr10/Cr10s, X40 Idex/X40 V2, Kp5l, S8 Pro/Plus, Sidewinder X1 X2, Tl-D3 Pro And Other 3D Printers. If Your 3D Printer Has A 310X310mm Heat Bed Platform, This Pet Sheet Is Compatible With Your 3D Printer..
[Easy To Use] For Most Filaments, No Need For Stick Glue, Tape Or Other Adhesive. Good Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is Around 80°C. When The Pet Building Surface Has Cooled, Very Easily Bending The Plate To Take Off The Printed Models. The Maximum Printing Temperature Of Pet Is 120°C, It Is Compatible With Pla Filament; While Pei Can Withstand 260°C High Temperature., Compatible With Filament Like Pla/ Asa/ Tpu/ Petg/ Abs Etc..
[Spring Steel Plate] Spring Steel Is A Steel Specially Manufactured For Springs And Elastic Elements. It Has The Ability Of Elastic Deformation, Printing Without Edge Warping, Not Easy To Scratch, Super Viscous, And It Is Difficult To Make It Permanent Deformation By Artificial Force..
Features
- [Packing Includes] 1pc 310x310mm sheet. Note: it is Single plate. One side smooth PET surface, one side textured PEI surface, two different printing experiences with one plate. There is no Magnetic base! The PET sheet needs to be used together with magnetic base, please make sure you already have one base on your 3d printer.
- [Spring steel plate] Spring steel is a steel specially manufactured for springs and elastic elements. It has the ability of elastic deformation, printing without edge warping, not easy to scratch, super viscous, and it is difficult to make it permanent deformation by artificial force.
- [Easy to Install] First stick the soft magnetic base to the heating bed of your 3D printer, then put the stacked PET steel foil platform on top and you are ready to use. the PET surface sticks to the magnet almost too well, it makes it easy to switch between smooth bottom surfaces and textured bottom surfaces.
- [Easy to Use] For most filaments, no need for stick glue, tape or other adhesive. Good adhesion can be achieved when the temperature of the heated bed is around 80 C. When the PET building surface has cooled, very easily bending the plate to take off the printed models. The maximum printing temperature of PET is 120 C, it is compatible with PLA filament; while PEI can withstand 260 C high temperature., compatible with filament like PLA/ ASA/ TPU/ PETG/ ABS etc.
- [Compatibility] The size of PET sheet is 310*310mm, not warped. It is compatible with most printers on the market with a build size of 310*310mm. It is suitable for CR10/CR10S, X40 IDEX/X40 V2, KP5L, S8 Pro/Plus, Sidewinder X1 X2, TL-D3 Pro and other 3D printers. If your 3D printer has a 310x310mm heat bed platform, This PET sheet is compatible with your 3D printer.
- See more on Amazon...
Brand: IdeaFormer IR3 | Manufacturer: Bell Tech
See On Amazon #16
2PCS Upgraded 310x320mm Smooth+Textured Thicker Pea PEI Sheet Spring Steel Flexible Build Plate with Magntic Base for Ender 3 Max/CR-10S Pro/CR-10 V2 V3/CR-X Pro/SV04 3D Printer.
Asin: B0C9JJQVRW
【Innovative Material 】：The Innovative Pea Material Makes The Bottom Of Printed Parts Flatter And Smoother, While Retaining A Glass-Like Reflectivity, Maintains Stronger Adhesion And Durability Than Peo/Pet, And Performs Better In Low-Temperature Printing, Completely Eliminates The Problem Of Bubbles..
【Commitment】：Pei Is A Superior Build Surface Material That Offers A Range Of Benefits Over Traditional Peo/Pet. It's More Resistant To High Temperatures And Wear, And Provides Better Adhesion.While Pei May Be More Expensive, We Believe In Providing The Best Quality Products To Our Customers.All Products Are Inspected Before Shipment,If You Have Any Questions Please Feel Free To Contact Us..
【Easy To Use】：Do Not Need Glue, Beauty Pattern Paper And Other Fixed Ways, Just Use Isopropyl Alcohol To Clean The Flexible Build Plate Surface, Heat The Hotbed To The Right Temperature According To The Kind Of Filament (Generally Pla Materials Need A Hot Bed To About 60 °), And Then Start Printing.After Printing, Just Slightly Bend The Pei Sheet Platform, You Can Remove The Print Easily.(Note:The Smooth Surface Has A Factory Protective Film That Needs To Be Removed.).
【Upgrade Pei Pro】:New Version Formula Pei Pro, Moredelicate Sandblasted Texture And Sturdy.It Maintains Stronger Adhesion And Durability Than Pei, And Performs Better In Low-Temperature Printing. Perfect For Pla, Peek, Abs. This Version Is Thicker Than The Original, With A More Delicate Spray Texture And Thicker Spring Steel Plates. For Different Consumables, Higher Viscosity Can Be Maintained At Lower Temperatures..
Features
- Affordable Package : In order to meet the needs of customers , especially the pursuit of matte and glossy printing results, we provide this cost-effective package. The package includes:1x Single side Smooth PEA Sheet build plate+1 x Dual-Side Textured PEI Pro Spring Steel Build Plate+ 1x Magnetic base.Size 310x320mm/12.2x12.5inch Upgraded PEA sheet is suitable for Creality Ender 3 Max/Ender 3 Max Neo/Anycubic Kobra Plus/CR-10S Pro/CR-10 V2/CR-10 V3/CR-X/CR-X Pro/SV04 3D Printer.
- Upgrade PEI Pro :New Version Formula PEI Pro, Moredelicate sandblasted texture and sturdy.It maintains stronger adhesion and durability than PEI, and performs better in low-temperature printing. Perfect for PLA, PEEK, ABS. This version is thicker than the original, with a more delicate spray texture and thicker spring steel plates. For different consumables, higher viscosity can be maintained at lower temperatures.
- Innovative Material The innovative PEA material makes the bottom of printed parts flatter and smoother, while retaining a glass-like reflectivity, maintains stronger adhesion and durability than PEO/PET, and performs better in low-temperature printing, completely eliminates the problem of bubbles.
- Easy to Use Do not need glue, beauty pattern paper and other fixed ways, just use isopropyl alcohol to clean the flexible build plate surface, heat the hotbed to the right temperature according to the kind of filament (generally PLA materials need a hot bed to about 60 ), and then start printing.After printing, just slightly bend the PEI sheet platform, you can remove the print easily.(Note:The smooth surface has a factory protective film that needs to be removed.)
- Commitment PEI is a superior build surface material that offers a range of benefits over traditional PEO/PET. It's more resistant to high temperatures and wear, and provides better adhesion.While PEI may be more expensive, we believe in providing the best quality products to our customers.All products are inspected before shipment,if you have any questions please feel free to contact us.
- See more on Amazon...
Brand: Shion.Kwoo | Manufacturer: Shionkwoo
See On Amazon #17
Double Side Textured PEI Sheet 235mmx235mm and Magnetic Sticker with Adhesive for Creality Ender 3(NEO)/Ender 3 Pro/Ender 3 V2(NEO) /Ender 3 S1(Pro) /Ender 5 S1 /Ender 5 (pro) 3D Printer Bed
Asin: B0C3WNM9CD | Model: PEI-235 | PartNumber: PEI-235 | Ean: 0741365796176 | UPC: 741365796176
✅【Wide Application】Compatible With Printing Area Below 235Mm Size Printers As Creality Ender 3/ Ender 3 Neo/ Ender 3 Pro/Ender 3 V2/ Ender 3 V2 Neo/ Ender3 S1/Ender 3 S1 Pro/ Ender 2/ Ender 5/ Ender 5 S1/ Ender 5 Pro/ Cr-20/ Cr-20 Pro/ Elegoo Neptune3 (Pro)/ Anycubic Kobra.,Etc.
✅【More Practical】We Use 75% Thicker Pei And 25% Thicker Spring Steel Than Our Leading Competitors. More Durable To Handle The Tough Conditions Of 24/7 Printing. Wear-Resistant And Scratch-Resistant, Easy To Clean,Also Anti-Scratch And Dustproof.
✅【100% Satisfaction Commitment】We Stand Behind The Quality Of Our Products. If For Any Reason You Are Not Satisfied With Your Purchase, Please Contact Us. We Provide 90-Day Money Back And 1 Year Warranty. 100% Satisfaction Guarantee For Risk-Free Shopping!.
✅【Enhance Printing Effect】Textured Pei Coating Would Make The Bottom Of Your Prints Show A Matte Texture And Retain The Frosted Feeling.Helps To Stick On The Bed More Firmly.Works For Most Fdm Materials In The Market, Like Pla, Pla+, Petg, Abs, Tpu, Asa, Nylon.
✅【Excellent Adhesion】Pei Coating Textured Surface On Both Side.Which Performs Excellent In Print Adhesion.Surface Temp Resistant Up To 120℃,Which Could Meet 99% Filament Material Needs..
Features
- EASY REMOVAL Contains PEI Sheet & Magnetic Sticker.Simply Install the PEI Sheet.designed for 3D prints easy removal. Self Release when Cooled Down, and flexible spring steel can be bent to peel off your prints.
- EXCELLENT ADHESION PEI Coating Textured surface on both side.which performs excellent in print adhesion.Surface Temp Resistant up to 120 ,which could meet 99% filament material needs.
- WIDE APPLICATION Compatible with Printing Area below 235mm size printers as Creality Ender 3/ Ender 3 Neo/ Ender 3 Pro/Ender 3 V2/ Ender 3 V2 Neo/ Ender3 S1/Ender 3 S1 pro/ Ender 2/ Ender 5/ Ender 5 S1/ Ender 5 Pro/ CR-20/ CR-20 Pro/ ELEGOO Neptune3 (Pro)/ Anycubic Kobra.,etc
- ENHANCE PRINTING EFFECT Textured PEI coating would make the bottom of your prints show a matte texture and retain the frosted feeling.helps to stick on the bed more firmly.works for most FDM materials in the market, like PLA, PLA+, PETG, ABS, TPU, ASA, Nylon
- MORE PRACTICAL We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. more durable to handle the tough conditions of 24/7 printing. Wear-Resistant and Scratch-Resistant, easy to clean,also anti-scratch and dustproof
- 100% SATISFACTION COMMITMENT We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 90-day money back and 1 YEAR warranty. 100% Satisfaction Guarantee for risk-free shopping!
- See more on Amazon...
First Available: 08/08/2023
Brand: FugaCity | Manufacturer: Fugacity LLC
Dimensions: 0.39 x 9.25 x 9.25 inches | Weight: 1.01 pounds
Warranty: 180D Warranty & Free Return from date purchased
See On Amazon #18
Gizmo Dorks PEI Sheet 12" x 12" (305mm x 305mm) 1mm Thick 3D Printer Build Surface with 3M 468MP Adhesive, Made in The USA
Asin: B074XLD5QH | Model: GD-POLYPEI-3M-12x12 | PartNumber: GD-POLYPEI-3M-12x12 | Ean: 0887503180848 | UPC: 887503180848
Remove Film From Both Sides Before Using: Blue Protective Film Guards Against Scratches During Shipping And Handling..
Includes: 1X Pei Sheet, 1X Full Size 3M 468Mp Adhesive Transfer Tape.
Reuse For Multiple Prints, Just Wipe Down With Isopropyl Alcohol Between Prints For Best Results.
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry..
Features
- MADE IN THE USA: Single 1mm thick sheet installs quickly on top of existing flat build platforms (e.g. borosilicate glass) using the 3M 468MP adhesive transfer tape.
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
- REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling.
- Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
- Includes: 1x PEI sheet, 1x full size 3M 468MP adhesive transfer tape
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.10 x 12.00 x 12.00 inches | Weight: 0.32 pounds
See On Amazon #19
Gizmo Dorks PEI Sheet 3D Printer Build Surface 220mm x 220mm (8.6" x 8.6") with Laminated 3M 468MP Adhesive, Made in The USA
Asin: B07FVQJ7QK | Model: GD-PEI3M-220MM | PartNumber: GD-PEI3M-220MM | Ean: 0887503182132 | UPC: 887503182132
Build Surface - Pei Is The Perfect No Prep Build Surface Which Is Endlessly Reusable For Multiple Prints; Clean With Isopropypl Alcohol Between Prints (Or With Acetone On A Cold Bed).
Dimensions: 220 X 220Mm / Pei Thickness: 0.56Mm (0.022 Inches) / Laminated 3M 468Mp Adhesive Thickness: 0.13Mm (0.005 Inches).
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry.
Bubble Free Application - The 3M 468Mp Adhesive Is Already Preapplied To The Pei; Simply Peel Back The Tape Liner For Quick Adhesion To The Bed.
Features
- Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass)
- Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed
- Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed)
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
- Dimensions: 220 x 220mm / PEI thickness: 0.56mm (0.022 inches) / Laminated 3M 468MP adhesive thickness: 0.13mm (0.005 inches)
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.03 x 8.60 x 8.60 inches | Weight: 0.10 pounds
See On Amazon
Looking For Something Else?
Search