uxcell 1 Set Transmission Oil Pan with Transmission Filter and Gasket No.68059549AA/52852912AC for Chrysler 300 for Dodge Challenge
Asin: B0CN1JJGCF
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easy To Install, Direct Replacement For The Old Or Broken One. Meets Original Oe Design For Easy Installation, Good Performance, And Long Service Life..
Package Included: 1 Set Transmission Oil Pan With Transmission Filter And Gasket..
This Is Vehicle Specific Product, Please Make Sure Your Car Model Before Ordering..
Material: Made Of Quality Material, It Is Wear Resistant And Corrosion Resistant..
Features
- Fitment: for Chrysler for Dodge for Ram Charger Dakota Durango.
- Material: Made of quality material, it is wear resistant and corrosion resistant.
- Easy to install, direct replacement for the old or broken one. Meets original OE design for easy installation, good performance, and long service life.
- This is vehicle specific product, please make sure your car model before ordering.
- Package Included: 1 Set Transmission Oil Pan with Transmission Filter and Gasket.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 1 Set Transmission Oil
#1
uxcell AXK2035 Thrust Needle Roller Bearings with Washers 20mm Bore 35mm OD 2mm Width 2pcs
Asin: B08FBK3D95 | Model: a19111200ux0185 | PartNumber: a19111200ux0185
[Features] - Needle Roller Thrust Bearings Can Accommodate Axial Loads In One Direction Only.
[Capability] - 45.6Kn Static Load Capacity, 12.9Kn Dynamic Load Capacity, 8500Rpm Maximum Rotational Speed.
[Washer] - Combined With 2 Washers For Applications Where Adjacent Machine Components Cannot Serve As Raceways.
[Material] - Chromium Steel Rollers For Heat Tolerance And Durability Under Heavy Loads; Steel Cage Guides And Evenly Spaced Rollers For Reduced Friction, Vibration, And Noise.
Features
- [MODLE] - Bearing Model: AXK2035 (I.D.=20mm, O.D.=35mm, Thickness=2mm); Washer Model: AS2035
- [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
- [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only
- [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways
- [CAPABILITY] - 45.6kN Static Load Capacity, 12.9kN Dynamic Load Capacity, 8500RPM Maximum Rotational Speed
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell AXK2035 Thrust Needle Roller Bearings with Washers 20mm Bore 35mm OD 2mm Width 5pcs
Asin: B08FHTLDNZ | Model: a19111200ux0186 | PartNumber: a19111200ux0186
[Features] - Needle Roller Thrust Bearings Can Accommodate Axial Loads In One Direction Only.
[Capability] - 45.6Kn Static Load Capacity, 12.9Kn Dynamic Load Capacity, 8500Rpm Maximum Rotational Speed.
[Washer] - Combined With 2 Washers For Applications Where Adjacent Machine Components Cannot Serve As Raceways.
[Material] - Chromium Steel Rollers For Heat Tolerance And Durability Under Heavy Loads; Steel Cage Guides And Evenly Spaced Rollers For Reduced Friction, Vibration, And Noise.
Features
- [MODLE] - Bearing Model: AXK2035 (I.D.=20mm, O.D.=35mm, Thickness=2mm); Washer Model: AS2035
- [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
- [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only
- [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways
- [CAPABILITY] - 45.6kN Static Load Capacity, 12.9kN Dynamic Load Capacity, 8500RPM Maximum Rotational Speed
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 Stainless Steel,Shaft Coupler Connector for 3D Printers, Motor Accessories,2pcs
Asin: B07P5YZKY5
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.97 x 1.18 inches
See On Amazon #4
uxcell AXK2035 Thrust Needle Roller Bearings with Washers 20mm Bore 35mm OD 2mm Width
Asin: B07GCC4N3B | Model: a18070500ux0480 | PartNumber: a18070500ux0480
[Features] - Needle Roller Thrust Bearings Can Accommodate Axial Loads In One Direction Only.
[Capability] - 45.6Kn Static Load Capacity, 12.9Kn Dynamic Load Capacity, 8500Rpm Maximum Rotational Speed.
[Washer] - Combined With 2 Washers For Applications Where Adjacent Machine Components Cannot Serve As Raceways.
[Material] - Chromium Steel Rollers For Heat Tolerance And Durability Under Heavy Loads; Steel Cage Guides And Evenly Spaced Rollers For Reduced Friction, Vibration, And Noise.
Features
- [MODLE] - Bearing Model: AXK2035 (I.D.=20mm, O.D.=35mm, Thickness=2mm, Thickness with Washers: 4mm); Washer Model: AS2035
- [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
- [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only
- [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways
- [CAPABILITY] - 45.6kN Static Load Capacity, 12.9kN Dynamic Load Capacity, 8500RPM Maximum Rotational Speed
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 5.51 x 3.94 inches
See On Amazon #5
uxcell 1/4 inch to 1/4 inch Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories,Blue
Asin: B07P82DDVW
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 1/4 inch to 1/4 inch, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 inches
See On Amazon #6
uxcell 2mm to 5mm Bore Rigid Coupling Set Screw L20XD12 Aluminum Alloy,Shaft Coupler Connector for RC Airplane Boat, Motor Accessories,Red,2pcs
Asin: B07P967FV9
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 2mm to 5mm, Total Length: 20mm /0.78 inch, Outside Diameter : 12mm/ 0.47 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 inches
See On Amazon #7
uxcell 1 Set No.3172829X0A Transmission Filter Oil Pan Gasket Kit for Infiniti JX35 L50 2013 for Infiniti QX60 L50 2014-2020
Asin: B0CJYFQTPX
Feature: Use Transmission Filter To Filter Oil And Remove Sundries From The Transmission Fluids. Keep The Transmission Fluids Clean And Prevent The Valve Body And Other Parts Be Clogged. Effectively To Extend The Service Life Of The Transmissions Kit. Please Check And Change Filter If The Gear Change Difficulty, Rattling, Leaks, And Smoke When Clogged.
Package Included: 1 X Transmission Oil Pan, 1 X Transmission Gasket. Please Search Video For Reference If You Have Query About Installation.Recommend To Professional Installation..
Material: Made Of Durable Metal And Plastic Materials. Stable Performance And High Reliability To Meet Original Performance, Bring A Safety Driving Experience For You..
Oe Number:3172829X0a.
Features
- Fitment: for Infiniti JX35 (L50) 2013, for Infiniti QX60 (L50) 2014-2020, for Infiniti QX60 hybrid (L50HV) 2015-2018, for Nissan MURANO (Z52) 2015-2021, for Nissan MAXIMA (A36) 2016-2021, for Nissan QUEST (E52) 2015-2017, for Nissan ALTIMA sedan 3.5 (L33) 2013-2019, for Nissan PATHFINDER (R52) 2013-2020, for Nissan PATHFINDER Hybrid (R52HV) 2015-2017
- OE Number:3172829X0A
- Feature: Use transmission filter to filter oil and remove sundries from the transmission fluids. Keep the transmission fluids clean and prevent the valve body and other parts be clogged. Effectively to extend the service life of the transmissions kit. Please check and change filter if the gear change difficulty, rattling, leaks, and smoke when clogged
- Material: Made of durable metal and plastic materials. Stable performance and high reliability to meet original performance, bring a safety driving experience for you.
- Package included: 1 x Transmission Oil Pan, 1 x Transmission Gasket. Please search video for reference if you have query about installation.Recommend to professional installation.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell AXK2035 Thrust Needle Roller Bearings with Washers 20mm Bore 35mm OD 2mm Width 10pcs
Asin: B08FHTKK23 | Model: a19111200ux0184 | PartNumber: a19111200ux0184
[Features] - Needle Roller Thrust Bearings Can Accommodate Axial Loads In One Direction Only.
[Capability] - 45.6Kn Static Load Capacity, 12.9Kn Dynamic Load Capacity, 8500Rpm Maximum Rotational Speed.
[Washer] - Combined With 2 Washers For Applications Where Adjacent Machine Components Cannot Serve As Raceways.
[Material] - Chromium Steel Rollers For Heat Tolerance And Durability Under Heavy Loads; Steel Cage Guides And Evenly Spaced Rollers For Reduced Friction, Vibration, And Noise.
Features
- [MODLE] - Bearing Model: AXK2035 (I.D.=20mm, O.D.=35mm, Thickness=2mm); Washer Model: AS2035
- [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
- [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only
- [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways
- [CAPABILITY] - 45.6kN Static Load Capacity, 12.9kN Dynamic Load Capacity, 8500RPM Maximum Rotational Speed
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell Nylon Line Hose Tube, 2mm(0.07") ID x 3mm(0.11") OD 1m/3.28ft PA6 Nylon Tube Pneumatic Air Brake Tubing for Fluid Transfer Clear
Asin: B08FDWXVK2 | Model: a19121800ux0047 | PartNumber: a19121800ux0047
►【Feature】- Tube Measures 0.07-Inches Inside Diameter By 0.11-Inches, Outside Diameter By 3.2-Feet, Total Length, And Thin Tube Wall 0.019";Working Pressure: 2Mpa/290Psi.
►【Tips】- Nylon Tube Air Line Hose Tubing Suitable For Fluid Transfer And Air Brake System.
►【 Material】- Good Temperature Resistance, Can Work In The Environment Of -40 ℃ To 120 ℃, .Low Permeability, And High Electrical Resistance, So It Can Be Used As An Insulator..
►【Advantage】-Pa6 Nylon Tube Fuel Pipe Excellent Flexibility, Small Bending Radius; Good Shock Resistant; Wide Range For Working Temperature And Pressure..
Features
- APPLICATION - Widely used in air, water, oil instrument lines, petroleum pipelines, hydraulic transmission systems, irrigation control systems, clutch hose, etc.
- Advantage -PA6 Nylon Tube Fuel Pipe Excellent flexibility, Small bending radius; Good shock resistant; Wide range for working temperature and pressure.
- FEATURE - Tube Measures 0.07-inches inside diameter by 0.11-inches, outside diameter by 3.2-feet, total length, and thin tube wall 0.019;Working Pressure: 2MPa/290psi
- material - Good temperature resistance, can work in the environment of -40 to 120 , .Low permeability, and high electrical resistance, so it can be used as an insulator.
- Tips - Nylon Tube Air Line Hose Tubing Suitable for Fluid Transfer and Air Brake System
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.04 x 39.60 x 0.11 inches | Weight: 0.00 pounds
See On Amazon #10
uxcell NTA1018 Thrust Needle Roller Bearings with Washers 5/8" Bore 1-1/8" OD 5/64" Width 2pcs
Asin: B09F9BYCQ2
[Features] - Needle Roller Thrust Bearings Can Accommodate Axial Loads In One Direction Only.
[Capability] - 7070N Static Load Capacity, 22550N Dynamic Load Capacity, 16000Rpm Maximum Rotational Speed.
[Washer] - Combined With 2 Washers For Applications Where Adjacent Machine Components Cannot Serve As Raceways.
[Material] - Chromium Steel Rollers For Heat Tolerance And Durability Under Heavy Loads; Steel Cage Guides And Evenly Spaced Rollers For Reduced Friction, Vibration, And Noise.
Features
- [MODEL] - Bearing Model: NTA1018 (I.D.=5/8-inch, O.D.=1-1/8-inch, Bearings Thickness(T1)=5/64-inch; Washer Thickness (T2): 0.032-inch(Approx.)); Washer Model: TRA1018
- [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
- [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only
- [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways
- [CAPABILITY] - 7070N Static Load Capacity, 22550N Dynamic Load Capacity, 16000RPM Maximum Rotational Speed
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell A25 Drive V-Belts 25" Pitch Length 13mm Width 8mm Thick JIS Standard A-Section Rubber Drive Transmission Belt 2pcs
Asin: B08GJXCVVT | Model: a19111200ux0655 | PartNumber: a19111200ux0655
Function: To Link Two Or More Rotating Shafts To Transmit Power In A Drive System. Even Load Distribution On Belt Drives And Good Wear Resistance..
Applications: Used For Drive Systems In The Automotive, Agricultural, Textile, Printing, Mining, And Office Equipment Industries, Ect..
Feature: The Trapezoidal Shape Of The Belts Cross Section Wedges Into The Groove Of A Similarly Shaped Sheave Or Pulley To Provide Traction And Alignment..
Material: It Is Made Of Neoprene Rubber For Resistance To Oils, Water, And Some Solvents..
Features
- Size: Model: A25; Pitch Length: 25"; Inner Girth: 630mm; Outer Girth: 680; Top Width: 13mm;Thickness: 8mm; Angle: 40 degree
- Material: It is made of neoprene rubber for resistance to oils, water, and some solvents.
- Function: To link two or more rotating shafts to transmit power in a drive system. Even load distribution on belt drives and good wear resistance.
- Feature: The trapezoidal shape of the belts cross section wedges into the groove of a similarly shaped sheave or pulley to provide traction and alignment.
- Applications: Used for drive systems in the automotive, agricultural, textile, printing, mining, and office equipment industries, ect.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell 1/4 Inch to 1/4 Inch Bore Rigid Coupling Set Screw L25XD20 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories,4pcs
Asin: B08H2487GF
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 1/4 inch to 1/4 inch; Total Length: 25mm/0.98 inch, Outside Diameter: 20mm/0.78 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell 1/8 Inch to 1/8 Inch Bore Rigid Coupling Set Screw L20XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Light Blue,2pcs
Asin: B08HCLB18L | Model: a20011400ux0852 | PartNumber: a20011400ux0852
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 1/8 inch to 1/8 inch; Total Length: 20mm /0.79 inch, Outside Diameter : 10mm/ 0.39 inch; with M3 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell 5mm to 5mm Bore Rigid Coupling Set Screw L22XD14 Stainless Steel,Shaft Coupler Connector for RC Airplane Boat, Motor Accessories
Asin: B07P6X8WF1
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 5mm to 5mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 inches
See On Amazon #15
uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 45# steel,Shaft Coupler Connector for 3D Printers, Motor Accessories
Asin: B07P6X92BT
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 inches
See On Amazon #16
uxcell 1 Set Transmission Filter Oil Pan for Toyota Tundra 2007-2014 No.3533060060
Asin: B0CHS82Z4X
[Feature] Use Transmission Filter To Filter Oil And Remove Sundries From The Transmission Fluids. Keep The Transmission Fluids Clean And Prevent The Valve Body And Other Parts Be Clogged. Effectively To Extend The Service Life Of The Transmissions. Please Check And Change Filter If The Gear Change Difficulty, Rattling, Leaks, And Smoke When Clogged.
[Package] Include 1 X Transmission Oil Pan, 1 X Transmission Gasket. Please Search Video For Reference If You Have Query About Installation. Recommend To Professional Installation..
[Material] Made Of Durable Plastic And Rubber Materials. Stable Performance And Good Reliability To Meet Original Performance, Bring A Safety Driving Experience For You..
Oe Number:3533060060.
Features
- [Fitment] This Transmission Filter Oil Pan for Toyota Tundra 2007-2014. Please check car make, model, year, OE number and part pictures before purchase.
- OE Number:3533060060
- [Feature] Use transmission filter to filter oil and remove sundries from the transmission fluids. Keep the transmission fluids clean and prevent the valve body and other parts be clogged. Effectively to extend the service life of the transmissions. Please check and change filter if the gear change difficulty, rattling, leaks, and smoke when clogged
- [Material] Made of durable plastic and rubber materials. Stable performance and good reliability to meet original performance, bring a safety driving experience for you.
- [Package] Include 1 x Transmission Oil Pan, 1 x Transmission Gasket. Please search video for reference if you have query about installation. Recommend to professional installation.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell 5mm to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories,Blue
Asin: B07P6X8X7Y
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 5mm to 8mm, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 inches
See On Amazon #18
uxcell A580 V-Belts 580mm Inner Girth 13mm Top Width 8mm Thickness A-Section Rubber Drive Transmission Belt
Asin: B0774ZCN2M | Model: a17072800ux0394 | PartNumber: a17072800ux0394 | Ean: 0605322999874 | UPC: 605322999874
Model: A580; Main Color: Black.
Inner Girth: 580Mm / 22.83".
Max. Width: 13Mm / 0.51"; Thickness: 8Mm / 0.31".
Net Weight: 69G; Package Content: 1 X Transmission Belt.
Features
- Size: Model: A580; Inner Girth: 580mm; Top Width: 13mm;Thickness: 8mm; Angle: 40 degree
- Net Weight: 69g; Package Content: 1 x Transmission Belt
- Model: A580; Main Color: Black
- Max. Width: 13mm / 0.51; Thickness: 8mm / 0.31
- Inner Girth: 580mm / 22.83
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 608ZZ Ball Bearing Guide Pulley Roller Round Wheel 8x30x10mm Double Metal Shielded (GCr15) Chrome Steel Bearings 4pcs
Asin: B08H278R7K | Model: a19111300ux0375 | PartNumber: a19111300ux0375
Chromium Steel Long-Life Bearings, Smooth And Low Noise.
Suitable For All Kinds Of Industrial Equipment, Micro Motor, Small Rotary Motor, Office Equipment And So On.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
608Zz Bearings Are Shielded On Both Sides To Keep Lubricant In.
Features
- 608ZZ (I.D.=8mm, O.D.=30mm, Thickness=10mm)
- 608ZZ bearings are shielded on both sides to keep lubricant in
- Chromium Steel long-life bearings, smooth and low noise
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell 8mm to 10mm Bore Rigid Coupling Set Screw L22XD16 Copper,Shaft Coupler Connector,Motor Accessories
Asin: B07P5Z2SB5
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 8mm to 10mm, Total Length: 22mm /0.87 inch, Outside Diameter : 16mm/ 0.63 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 inches
See On Amazon
Looking For Something Else?
Search