1pcs,2A Active Balancer Equalizer 3S 4S 5S 6S 7S, Lithium ion, Lithium Battery Single Balance Module Capacitor Energy Transfer (Color : 6S-7S)
Asin: B0CWSL5H1G | Model: SYNZPLHG | PartNumber: SYNZPLHG | Ean: 6473760034679
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: SYNZPLHG | Manufacturer: SYNZPLHG
Weight: 0.44 pounds
See On Amazon Similar To 1pcs2A Active Balancer Equalizer 3S
#1
5A 3S 4S 12V Battery Active Equalizer Whole Group Balancer LiFePO4 LFP Lipo Li-ion Lithium Active Battery Energy Transfer Equalization Capacitor Balancer PCB Module with Acrylic Protective Case
Asin: B0BBRNF823 | Model: JWCABalancer-4S | PartNumber: JWCABalancer-4S | Ean: 0789513999000 | UPC: 789513999000
The Quiescent Current Is About 12Ma, And The Battery Capacity Is Recommended To Be Used Between 30-300Ah!.
Note: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Otherwise, It Will Short-Circuit And Burn The Board..
With Under-Voltage Sleep Protection, Only Detecting The Battery Voltage Of B1, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Is Lower Than 2.7V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.
Features
- Working Voltage: 2.7V-4.2V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4). It can Not fit LTO battery. If it is used for 3S, the last line B4+ is empty. (Note: The default protective case is a kit, not assembled, the transparent acrylic case has a yellow protective film that can be peeled off. )
- Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB, balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
- The quiescent current is about 12mA, and the battery capacity is recommended to be used between 30-300AH!
- With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
- Note: Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board.
- See more on Amazon...
Brand: XFYBZN | Manufacturer: XFYBZN
Dimensions: 0.63 x 2.60 x 1.80 Inches | Weight: 0.22 Pounds
Warranty: Manufacturer warranty for 90 days from date of purchase.
See On Amazon #2
6S 7S 8S 5A Active Equalizer Balancer 8S Equalizer Lifepo4 Li-ion Lithium Lipo/Titanate LTO Energy Transfer Board Whole Group Capacitor Balancer PCB
Asin: B096NNRSMV | Model: JW-CAP-Balancer-8S | PartNumber: JW-CAP-Balancer-8S | Ean: 0723258876165 | UPC: 723258876165
Working Voltage: 1.8V-4.5V, Suitable For Li-Ion,Lifepo4,Lto Battery. The Quiescent Current Is About 7Ma, And The Battery Capacity Is Recommended To Be Used Between 30-200Ah/Per Balancer.High-Capacity Batteries Can Be Connected In Parallel With Multiple Equalizers. With Under-Voltage Sleep Protection, Only Detecting The B1 Battery Voltage, The Equalizer Will Automatically Stop Entering The Sleep State When B1 Voltage Ncm/Lfp<2.7V Or Lto<1.8V, And The Standby Power Consumption Is Less Than 0.1Ma..
The Quiescent Current Is About 7Ma, And The Battery Capacity Is Recommended To Be Used Between 30-200Ah/Per Balancer.High-Capacity Batteries Can Be Connected In Parallel With Multiple Equalizers. With Under-Voltage Sleep Protection, Only Detecting The B1 Battery Voltage, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Ncm/Lfp<2.7V Or Lto<1.8V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb. Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.
【Note】: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Default Setting Fit For Ncm/Lfp Battery, If You Use For Lto Battery, Please Remove The Previous Short Circuiting Pad And Then Re Short Circuiting The Lto Pad (With A Rectangular Short Circuiting Mark On The Board)..
Features
- USE Tips The voltage gap of each battery must be within 0.5V. When the battery voltage difference does not reach more than 0.1V, the light on the balance board is triggered by mistake. The light actually has no balance current when it lights up, and it will automatically go out after a period of time. So We suggest re-plugging the cable to solve the problem. Note that It takes time to equalize the voltage, hot is normal and it does not take effect immediately after plugging it in.
- NOTE : Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. DEFAULT setting fit for NCM/LFP battery, If you use for LTO battery, Please remove the previous short circuiting pad and then re short circuiting the LTO pad (with a rectangular short circuiting mark on the board).
- Working Voltage: 1.8V-4.5V, suitable for Li-ion,LiFePO4,LTO battery. The quiescent current is about 7mA, and the battery capacity is recommended to be used between 30-200AH/Per Balancer.High-capacity batteries can be connected in parallel with multiple equalizers. With under-voltage sleep protection, only detecting the B1 battery voltage, the equalizer will automatically stop entering the sleep state when B1 voltage NCM/LFP<2.7V or LTO<1.8V, and the standby power consumption is less than 0.1mA.
- Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB. Balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
- The quiescent current is about 7mA, and the battery capacity is recommended to be used between 30-200AH/Per Balancer.High-capacity batteries can be connected in parallel with multiple equalizers. With under-voltage sleep protection, only detecting the B1 battery voltage, the equalizer will automatically stop entering the sleep state when the B1 voltage NCM/LFP<2.7V or LTO<1.8V, and the standby power consumption is less than 0.1mA.
- See more on Amazon...
Brand: QINIZX | Manufacturer: QINIZX
Dimensions: 0.63 x 3.58 x 2.75 Inches | Weight: 0.29 pounds
See On Amazon #3
4 to 24S 8A Battery Active Equalizer, Automatic Detection Active Balancer Lithium Battery Active Balance Board with Circuit Breaker Protection Device
Asin: B09YRJFQBX
Automatic And Manual Triggering: The Balancer Has Dual Modes Of Automatic And Manual Triggering, And You Can Manually Force The Balance Timing Off Function When You Need It.
High Power Balance: Active Equalizer Has High Power, And Mos Devices Form An Ultra-Low Dynamic Impedance Inverter Circuit To Achieve High Power Balance Work. When The High Voltage Difference Is Very Balanced, The Inverter Can Dissipate Heat, Prevent Damage To The Machine, And Reduce Harm.
Nano-Amorphous Isolation Fully Symmetrical Transformer: Active Balancer Guarantees The Minimum Voltage Difference, And Each String Of Input Overcurrent Resistors Ensures Safety, Ensuring The Safety Of The Entire Circuit..
Automatic Detection: This Equalizer Can Automatically Detect The Minimum Voltage Of The Battery, Stop Working When The Battery Is Low, Protect The Health Of The Battery And Increase The Battery Life..
Features
- Circuit Breaker Protection Device: Battery active equalizer has a small circuit breaker device with overcurrent protection, which can control instantaneous abnormally large current, disconnect overtemperature, and protect the battery pack for normal and continuous balance
- Automatic Detection: This equalizer can automatically detect the minimum voltage of the battery, stop working when the battery is low, protect the health of the battery and increase the battery life.
- Automatic And Manual Triggering: The balancer has dual modes of automatic and manual triggering, and you can manually force the balance timing off function when you need it
- Nano-Amorphous Isolation Fully Symmetrical Transformer: Active balancer guarantees the minimum voltage difference, and each string of input overcurrent resistors ensures safety, ensuring the safety of the entire circuit.
- High Power Balance: Active equalizer has high power, and MOS devices form an ultra-low dynamic impedance inverter circuit to achieve high power balance work. When the high voltage difference is very balanced, the inverter can dissipate heat, prevent damage to the machine, and reduce harm
- See more on Amazon...
Brand: Fafeicy | Manufacturer: Fafeicy
See On Amazon #4
Battery Active Equalizer Balancer Energy Transfer Board Accessory Lithium Lipo Battery Energy Active Equalizer(5S)
Asin: B09F6RPBZX | Model: Hilitandx9684a1oz56521-13 | PartNumber: Hilitandx9684a1oz56521-13
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon #5
Active Equalizer Balancer Battery Energy Transfer Board Accessory Part Equalization Capacitor for NCM LFP LTO (8S)
Asin: B0BRSZCV6G | Model: Hilitandmgfxty1uqa-13 | PartNumber: Hilitandmgfxty1uqa-13
This Active Equalizer Can Be Applied In Ternary Lithium Battery, Lithium Iron Battery, And Lto Battery..
Adopting Ultra Low Internal Resistance Mos And Premium Printed Circuit Board To Ensure Efficient Balance Effect..
The Transfer Is Carried Out By Means Of The Internal Energy Transfer Of The Battery And The Balance Of The Entire Battery Pack, And No External Power Supply Is Required..
When The Voltage Is Lower Than 3.0V, It Will Automatically Stop And Enter The Dormant State, And The Standby Power Consumption Is Less Than 0.1Ma..
Features
- The working voltage is 1.8V to 4.2V, and the balance current is 0 to 5.5A, the better the balance, the smaller the balance current
- When the voltage is lower than 3.0V, it will automatically stop and enter the dormant state, and the standby power consumption is less than 0.1mA.
- This active equalizer can be applied in ternary lithium battery, lithium iron battery, and LTO battery.
- The transfer is carried out by means of the internal energy transfer of the battery and the balance of the entire battery pack, and no external power supply is required.
- Adopting ultra low internal resistance MOS and premium Printed Circuit Board to ensure efficient balance effect.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon #6
Active Equalizer Balancer, Lithium Battery Cell Energy Transfer Board 4 Series 6A Equalization Board
Asin: B0BR8DBYBM | Model: Hilitandih6vn7y2zt | PartNumber: Hilitandih6vn7y2zt
【High Accurate】 The Price Is Lower Than Similar Capacitor Products, Which Keeps Each Battery Balanced And Prolongs The Service Life Of The Battery..
【Capacitance Principle】 No External Power Supply Is Required,The Working Principle Is Capacitor Fit Transfers The Transporter, Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack.The Equalization Board Can Be Connected To The Battery To Start The Equalization Work..
【Applicability】With Simple Indicating Switch, It Is Suitable For People With Weak Base To Operate. All Ternary Lithium Batteries And Iron Lithium Batteries Are Universal..
【Active Capacitance Balance】 Using A Specially Customized Control Chip, Does Not Detect The Pressure Difference/Designed To Work For A Long Time Without Shutting Down..
Features
- Current The quiescent current is as low as 5mA, which can achieve a high accurate equalization of 5mV, and the equalization current is 2~6A (this refers to the limit current that the circuit board can withstand. In the case of small voltage difference or large internal resistance of the battery, the current is not so Big).
- Active Capacitance Balance Using a specially customized control chip, does not detect the pressure difference/designed to work for a long time without shutting down.
- High Accurate The price is lower than similar capacitor products, which keeps each battery balanced and prolongs the service life of the battery.
- Applicability With simple indicating switch, it is suitable for people with weak base to operate. All ternary lithium batteries and iron lithium batteries are universal.
- Capacitance Principle No external power supply is required,The working principle is Capacitor fit transfers the transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack.the equalization board can be connected to the battery to start the equalization work.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon #7
Battery Active Equalizer Balancer Board 4 Series 6A Capacitive Active Equalization Board Energy Transfer Board
Asin: B09PYJL2DJ
Scope Of Application: All Ternary Lithium Batteries And Iron Lithium Batteries Are Universal..
Applicability: With Simple Indicating Switch, It Is Suitable For People With Weak Base To Operate..
Current: The Quiescent Current Is As Low As 5Ma, Which Can Achieve A High Accurate Equalization Of ±5Mv, And The Equalization Current Is 2~6A (This Refers To The Limit Current That The Circuit Board Can Withstand. In The Case Of Small Voltage Difference Or Large Internal Resistance Of The Battery, The Current Is Not So Big)..
High Accurate: The Price Is Lower Than Similar Capacitor Products, Which Keeps Each Battery Balanced And Prolongs The Service Life Of The Battery..
Features
- Active Capacitance Balance: Using a specially customized control chip, does not detect the pressure difference/designed to work for a long time without shutting down.
- High Accurate: The price is lower than similar capacitor products, which keeps each battery balanced and prolongs the service life of the battery.
- Scope of Application: All ternary lithium batteries and iron lithium batteries are universal.
- Current: The quiescent current is as low as 5mA, which can achieve a high accurate equalization of 5mV, and the equalization current is 2~6A (this refers to the limit current that the circuit board can withstand. In the case of small voltage difference or large internal resistance of the battery, the current is not so Big).
- Applicability: With simple indicating switch, it is suitable for people with weak base to operate.
- See more on Amazon...
Brand: YWBL-WH | Manufacturer: YWBL-WH
See On Amazon #8
4S-24S 4A Active Equalizer Balancer 6S 8S 10S 12S 13S 16S 17S 20S 21S Lifepo4 LFP/Lipo Li-on/LTO Lithium Battery Energy Transfer Equalization Board Whole Group Capacitor Balance
Asin: B0CTWRXJ5X | Model: Balancer-24S-4A | PartNumber: Balancer-24S-4A
Balance Method: Patented Balanced Architecture Flying Super Capacitor Method, Combined With Point-To-Point Energy Transfer Algorithm For High-Efficiency Balance. Balance Current: App-Custom Setting: 1-4A, Due To The Use Of Constant Current And Constant Voltage Technology, The Balance Current Has Nothing To Do With The Battery Voltage Difference; Voltage Balance Accuracy: ±1Mv (Voltage Measurement Accuracy), ±1Mv (Voltage Equalization Accuracy), This Product Is Calibrated By Keithley Dmm7510..
3-Led Indicator: Blue Is The Bt Status Indicator: Always On, The Link Is Successful, Flashing, Link Down; Red Is The Fault Status Indicator: Always On, Internal Fault, Flashing, Battery Test Failed; Green Is The Working Status Indicator: Always On, The Balance Is Completed Flashing, Balanced Work; Note That The Time Required For Equalization Mainly Depends On The Battery Capacity. It Is Normal For The Capacitor To Heat Up During Energy Conversion..
Under Voltage Protection Sleep Voltage: Under-Voltage Sleep Voltage Can Be Customized By App: 1.5-4.2V; Drop Detection: Support; Static Working Current: Balance Off 10Ma, Balance On 25Ma; Board Size: 5.51X5.0X0.87Inch; Balance Wire Length: 15.7Inch; App-Name: For Ios-System, Please Search-Geewebms, For Android-System, Please See The Photo Or Contact Us By Message, We Can Send You Download Link, Wiring Method And English Manual..
Applicable Battery Type: Ncm/Lfp/Lto (Li-Ion/Lifepo4/Lto); Single-Cell Working Voltage: 1.0～4.5V; Applicable Battery String Number: 10S-24S. But (No External Power Supply)The Minimum Total Voltage Of The Battery Pack Is Greater Than 30V, The Recommended Value: Li-Ion Battery≥ 10S, Lifepo4 Battery≥ 12S, Lto Battery ≥20S; If The Battery Pack Total Voltage Is Lower Than 30V, External 30V-100V Dc Power Supply Is Required(Eg. 4S-8S). The Combination Of Multiple Equalizer Boards Supports Cascading Into A Battery Pack Equalizer Board With A Higher Number Of Strings..
Features
- USE: Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Date link: (NOTE: Turn on the location of the phone. If the machine cannot be found, close the app-background and restart the APP and try again.)
- Applicable battery type: NCM/LFP/LTO (Li-ion/LiFePO4/LTO); Single-cell working voltage: 1.0 4.5V; Applicable battery string number: 10S-24S. But (No external power supply)The minimum total voltage of the battery pack is greater than 30V, the recommended value: Li-ion battery 10S, LiFePO4 battery 12S, LTO battery 20S; If the battery pack total voltage is lower than 30V, External 30V-100V DC power supply is required(eg. 4S-8S). The combination of multiple equalizer boards supports cascading into a battery pack equalizer board with a higher number of strings.
- Balance method: Patented balanced architecture Flying super capacitor method, combined with point-to-point energy transfer algorithm for high-efficiency balance. Balance current: APP-custom setting: 1-4A, due to the use of constant current and constant voltage technology, the balance current has nothing to do with the battery voltage difference; Voltage balance accuracy: 1mv (voltage measurement accuracy), 1mv (voltage equalization accuracy), this product is calibrated by Keithley DMM7510.
- Under voltage protection sleep voltage: Under-voltage sleep voltage can be customized by APP: 1.5-4.2V; Drop detection: Support; Static working current: Balance off 10mA, balance on 25mA; Board Size: 5.51x5.0x0.87inch; Balance wire length: 15.7inch; App-name: for ios-system, please search-GeeWEBMS, for Android-system, please see the photo or contact us by message, we can send you download link, wiring method and english manual.
- 3-LED indicator: Blue is the BT status indicator: always on, the link is successful, Flashing, link down; Red is the fault status indicator: always on, internal fault, Flashing, battery test failed; Green is the working status indicator: always on, the balance is completed Flashing, balanced work; Note that The time required for equalization mainly depends on the battery capacity. It is normal for the capacitor to heat up during energy conversion.
- See more on Amazon...
Brand: XFYBZN | Manufacturer: XFYBZN
Dimensions: 2.00 x 6.00 x 5.90 Inches | Weight: 1.00 pounds
Warranty: Manufacturer warranty for 90 days from date of purchase.
See On Amazon #9
Active Balancer 8A Battery 24S Equalizer for Lithium Positive Coated Sensitized Prototyping Boards
Asin: B0CSDDXX7B | Model: Yosooxvd69s8ugz | PartNumber: Yosooxvd69s8ugz
Equalizer: Original Imported From Germany, Quality Guaranteed. Made With Technology..
High For Power Balance High For Power Balance Work With Low Impedance Inverter Circuit.
Balancer For Lithium Battery Equalizer 4‑24S Battery For Balance Board 8A 3.81 Ternary For Lithium Iron Automotive Equipment Garage Shop Converters.
Quality Service If You Have Any Questions About The Product, Please Contact Us At Any Time, We Will Offer You The Best Solution..
Features
- CIRCUIT BREAKER PROTECTION Controls abnormal large and battery pack
- Quality Service If you have any questions about the product, please contact us at any time, we will offer you the best solution.
- Equalizer: Original imported from Germany, quality guaranteed. Made with technology.
- Balancer for lithium Battery Equalizer 4 24S Battery for balance board 8A 3.81 Ternary for lithium Iron Automotive Equipment Garage Shop Converters
- HIGH for power balance high for power balance work with low impedance inverter circuit
- See more on Amazon...
Brand: Yosoo | Manufacturer: Yosoo
See On Amazon #10
Active Equalizer, Current Voltage Balancer 4S 5A Active Equalizer Lithium Battery Pack Unit Energy Capacitor PCB, Power Converters
Asin: B0CJMKRS87 | Model: Hilitandtpk92r6q30 | PartNumber: Hilitandtpk92r6q30
Trigger Dual Mode: Active Balance Board Has Automatic Or Manual Trigger Dual Mode, Manual Forced Balance Timing Off Function, Easy To Use.
Guaranteed Minimum Voltage Difference: The Active Balance Board Adopts Nano-Amorphous Isolation Full Symmetrical Transformer, Which Can Ensure The Minimum Voltage Difference; Each String Of Input Overcurrent Resistance Can Ensure Safety.
Automatic Detection: The Active Balance Board Automatically Detects The Lowest Voltage Of The Battery, Stops Working When The Battery Is Low, And Protects The Battery From Power Failure.
Balanced And Automatic Work: Ultra-Low Internal Resistance Mos Devices Constitute An Ultra-Low Dynamic Impedance Inverter Circuit To Achieve High-Power Balance Work; Intelligent Mcu Chip Master Control Management Can Achieve Automatic And Autonomous Balance Work.
Features
- Heat dissipation design: The heat dissipation design of the inverter in the extreme balance state of high pressure difference, the equalization method adopts the parallel energy transfer method, which is very reliable
- Balanced and automatic work: Ultra-low internal resistance MOS devices constitute an ultra-low dynamic impedance inverter circuit to achieve high-power balance work; intelligent MCU chip master control management can achieve automatic and autonomous balance work
- Trigger dual mode: Active balance board has automatic or manual trigger dual mode, manual forced balance timing off function, easy to use
- Automatic detection: The active balance board automatically detects the lowest voltage of the battery, stops working when the battery is low, and protects the battery from power failure
- Guaranteed minimum voltage difference: The active balance board adopts nano-amorphous isolation full symmetrical transformer, which can ensure the minimum voltage difference; each string of input overcurrent resistance can ensure safety
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon #11
Battery Active Equalizer, Low Internal Resistance MOS Inductive Balancer Smaller Current Professional with Cable for LFP Batteries (6s)
Asin: B0CCYPL9HX | Model: CHICIRIS10ioaxmwdu-12 | PartNumber: CHICIRIS10ioaxmwdu-12
High Accuracy Balance: Balance Voltage Accuracy Within 30Mv, Bring High Accuracy Energy Transmission Balance, Exclusive Balance Ic.
Smaller Voltage Difference: Built In Improved Ultra Low Internal Resistance Mos, The Balance Current Is 0-1.2A, And The Battery Voltage Difference Is Smaller.
Protection Board Auxiliary: The Balance Board Is Not A Bms Protection Board, But An Auxiliary Of The Protection Board, So No Matter How Bad The Battery Test You Use, It Can Be Used, But There Is No Overvoltage Or Overdischarge Protection Function.
1.2A Current: Inductive Energy Transmission Equalization Board Has 1.2A Equalization Current, Slightly Lower Accuracy.
Features
- LOW STATIC POWER CONSUMPTION: Battery active equalizer possess smaller current, the static power consumption does not exceed 20uA, with balance instructions
- 1.2A CURRENT: Inductive energy transmission equalization board has 1.2A equalization current, slightly lower accuracy
- HIGH ACCURACY BALANCE: Balance voltage accuracy within 30mv, bring high accuracy energy transmission balance, exclusive balance IC
- PROTECTION BOARD AUXILIARY: The balance board is not a BMS protection board, but an auxiliary of the protection board, so no matter how bad the battery test you use, it can be used, but there is no overvoltage or overdischarge protection function
- SMALLER VOLTAGE DIFFERENCE: Built in improved ultra low internal resistance MOS, the balance current is 0-1.2A, and the battery voltage difference is smaller
- See more on Amazon...
Brand: CHICIRIS | Manufacturer: CHICIRIS
See On Amazon #12
Battery Active Balancer Board 4 String 6A Active Capacitance Balance Board 4S 6A Battery Active Equalizer Board
Asin: B0CBXRXQPJ | Model: Eujgoovg26ezdo9uc | PartNumber: Eujgoovg26ezdo9uc
Applicability: With Simple Indicating Switch, It Is Suitable For People With Weak Base To Operate..
Current: The Quiescent Current Is As Low As 5Ma, Which Can Achieve A High Accurate Equalization Of ±5Mv, And The Equalization Current Is 2~6A (This Refers To The Limit Current That The Circuit Board Can Withstand. In The Case Of Small Voltage Difference Or Large Internal Resistance Of The Battery, The Current Is Not So Big)..
Active Capacitance Balance: Using A Specially Customized Control Chip, Does Not Detect The Pressure Difference/Designed To Work For A Long Time Without Shutting Down..
Scope Of Application: All Ternary Lithium Batteries And Iron Lithium Batteries Are Universal..
Features
- High Accurate: The price is lower than similar capacitor products, which keeps each battery balanced and prolongs the service life of the battery.
- Scope of Application: All ternary lithium batteries and iron lithium batteries are universal.
- Applicability: With simple indicating switch, it is suitable for people with weak base to operate.
- Active Capacitance Balance: Using a specially customized control chip, does not detect the pressure difference/designed to work for a long time without shutting down.
- Current: The quiescent current is as low as 5mA, which can achieve a high accurate equalization of 5mV, and the equalization current is 2~6A (this refers to the limit current that the circuit board can withstand. In the case of small voltage difference or large internal resistance of the battery, the current is not so Big).
- See more on Amazon...
Brand: Eujgoov | Manufacturer: Eujgoov
See On Amazon #13
Capacitor Active Equalizer Battery Active Equalizer BMS Balancer Active Balance Equalization Module for LTO LFP LPO NCM (3-4S)
Asin: B0CBQ9TS6S | Model: FTVOGUEfw78mhg6qe-11 | PartNumber: FTVOGUEfw78mhg6qe-11
Wider Utility: Allows For Broad Application On Various Cells, Such As Li2tio3, Li Ion Lithium, For Lifepo4, Ncm And So On..
Better Designs: Has Reserved Position For Sleep Switch Wiring, The Working Current Of Sleep Mode Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv..
Practical Uses: The Quiescent Current Is About 12Mah, And The Recommended Battery Capacity Is 60‑300Ah For Batteries..
Secure Working: Adopting Low Internal Resistance Mos And 2Oz Copper Thick Pcb, The Balance Current Is 0‑5.5A, The More Balance The Battery, The Smaller The Balance Current..
Features
- Easy Operation: Fly transfer carrier with high capacitive degree, just connect to the battery and start equalization.
- Secure Working: Adopting low internal resistance MOS and 2OZ copper thick PCB, the balance current is 0 5.5A, the more balance the battery, the smaller the balance current.
- Wider Utility: Allows for broad application on various cells, such as Li2TiO3, li ion lithium, for LiFePo4, NCM and so on.
- Practical Uses: The quiescent current is about 12mAh, and the recommended battery capacity is 60 300AH for batteries.
- Better Designs: Has reserved position for sleep switch wiring, the working current of sleep mode is less than 0.1mA, and the balance voltage accuracy is within 5mv.
- See more on Amazon...
Brand: FTVOGUE | Manufacturer: FTVOGUE
See On Amazon #14
Active Equalizer, Battery Active Balancer Board, General Purpose Lithium Battery Inductance Active Balance Board (2S)
Asin: B0C9Z6T85Z | Model: Fafeicy5i6ycogr3x-11 | PartNumber: Fafeicy5i6ycogr3x-11
Applicability: Suitable For Ternary Lithium Batteries And Iron Lithium Batteries..
Simple And Easy To Use: The Accuracy Is Not As Good As The Balance Board Of The Capacitor Type, But It Is Low In Price And High In Cost Performance Among Similar Products..
Battery Active Balancer Board Balance Current Is 1.3A (Balance Current Is Related To Voltage Difference, The Smaller The Voltage Difference, The Smaller The Balance Current)..
Balance Function: The Battery Protection Module Has A Balance Function To Maintain The Balance Of Each Battery And Extend The Life Of The Battery..
Features
- Active Inductance Equalization: Battery active balancer board will start when the voltage difference exceeds 0.1V, and the equalization accuracy of 50mV
- Balance Function: The battery protection module has a balance function to maintain the balance of each battery and extend the life of the battery.
- Applicability: Suitable for ternary lithium batteries and iron lithium batteries.
- Battery active balancer board balance current is 1.3A (balance current is related to voltage difference, the smaller the voltage difference, the smaller the balance current).
- Simple and Easy to Use: The accuracy is not as good as the balance board of the capacitor type, but it is low in price and high in cost performance among similar products.
- See more on Amazon...
Brand: Fafeicy | Manufacturer: Fafeicy
See On Amazon #15
Active Equalizer Balancer Energy Transfer Board Accessory Lithium Lipo Battery Energy Active Equalizer Power Converters (4S)
Asin: B0C8NT3RLY | Model: Marhynchuskcmg653bug-12 | PartNumber: Marhynchuskcmg653bug-12
Practical Tool: No External Power Supply Is Required, And The Transfer Is Carried Out By Means Of The Internal Energy Transfer Of The Battery And The Balance Of The Entire Battery Pack..
Battery Active Equalizer Balancer Energy Printed Circuit Board Lithium Low Internal Resistance Ternary.
Great Performance: Using Ultra Low Internal Resistance Mos And Premium Printed Circuit Board, Ensuring Excellent Balance Effect. The Balance Accuracy Is 5Mv, The Sleep Current Is Less Than 0.1Ma, And The Efficiency Is Very High..
No External Power Supply Is Required, And The Transfer Is Carried Out By Means Of The Internal Energy Transfer Of The Battery And The Balance Of The Entire Battery Pack..
Features
- Efficient. The balance accuracy of the battery active equalizer is 5MV, the sleep current is less than 0.1mA, and the efficiency is very high.
- No external power supply is required, and the transfer is carried out by means of the internal energy transfer of the battery and the balance of the entire battery pack.
- Practical Tool: No external power supply is required, and the transfer is carried out by means of the internal energy transfer of the battery and the balance of the entire battery pack.
- Great Performance: Using ultra low internal resistance MOS and premium Printed Circuit Board, ensuring excellent balance effect. The balance accuracy is 5MV, the sleep current is less than 0.1mA, and the efficiency is very high.
- Battery Active Equalizer Balancer Energy Printed Circuit Board Lithium Low Internal Resistance Ternary
- See more on Amazon...
Brand: Marhynchus | Manufacturer: Marhynchus
See On Amazon #16
3S 4S 5A Balancer Whole Group Active Equalizer Lifepo4 Lipo Lto Lithium Active Battery Energy Transfer Equalization Capacitor
Asin: B0BNVZNJYY
[Original Design]:Using The Original Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Equalizing Current 0-5.5A, The More Balanced The Battery, The Lower The Current..
[Satisfactory Service]: We Provide 24-Hour Online Service,If You Encounter Any Problems, Please Email Seller Support (Not Amazon Support), We Will Give You A Perfect Solution..
[Capacitance Principle]: No External Power Supply Is Required,The Working Principle Is Capacitor Fit Transfers The Charge Transporter, Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack.The Equalization Board Can Be Connected To The Battery To Start The Equalization Work..
[Protection Switch]: With Sleep Protection, When The Voltage Is Lower Than 3V, It Will Automatically Stop And Enter The Sleep State To Reduce The Damage To The Battery..
Features
- [Product Information]: Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout.Model:3S-4S Suitable : Lithium Iron Phosphate, NCM Ternary Polymer,(Not Fit Lithium Titanate) ,Voltage is 1.8 V-4.5V ,Suggest Battery Capacity: 60-300AH.
- [Protection switch]: With sleep protection, when the voltage is lower than 3V, it will automatically stop and enter the sleep state to reduce the damage to the battery.
- [Original Design]:using the original ultra-low internal resistance MOS, 2OZ copper thickness PCB, equalizing current 0-5.5A, The more balanced the battery, the lower the current.
- [Capacitance Principle]: No external power supply is required,The working principle is Capacitor fit transfers the charge transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack.the equalization board can be connected to the battery to start the equalization work.
- [Satisfactory Service]: We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.
- See more on Amazon...
Brand: Cywhrvzsf | Manufacturer: Cywhrvzsf-4s
Dimensions: 1.18 x 3.54 x 2.76 Inches
See On Amazon #17
Battery Active Equalizer Battery Active Equalizer Cell Equalizer Universal Cell Balancer Balance Board 5A for LTO LFP LPO NCM (3-4S)
Asin: B0BRY846RN | Model: WALFRONTnz310tqgrx-11 | PartNumber: WALFRONTnz310tqgrx-11
Better Designs: Has Reserved Position For Sleep Switch Wiring, The Working Current Of Sleep Mode Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv..
Wider Utility: Allows For Broad Application On Various Cells, Such As Li2tio3, Li Ion Lithium, For Lifepo4, Ncm And So On..
Practical Uses: The Quiescent Current Is About 12Mah, And The Recommended Battery Capacity Is 60‑300Ah For Batteries..
Secure Working: Adopting Low Internal Resistance Mos And 2Oz Copper Thick Pcb, The Balance Current Is 0‑5.5A, The More Balance The Battery, The Smaller The Balance Current..
Features
- Easy Operation: Fly transfer carrier with high capacitive degree, just connect to the battery and start equalization.
- Secure Working: Adopting low internal resistance MOS and 2OZ copper thick PCB, the balance current is 0 5.5A, the more balance the battery, the smaller the balance current.
- Better Designs: Has reserved position for sleep switch wiring, the working current of sleep mode is less than 0.1mA, and the balance voltage accuracy is within 5mv.
- Practical Uses: The quiescent current is about 12mAh, and the recommended battery capacity is 60 300AH for batteries.
- Wider Utility: Allows for broad application on various cells, such as Li2TiO3, li ion lithium, for LiFePo4, NCM and so on.
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon #18
Active Equalizer Lithium Battery Pack 4-24 Strings LED Display Energy Transfer Balancer Auto Balancing MCU Chip Equalization Capacitor Balancer
Asin: B0CP2SJN7X | Model: WALFRONT9qma70ypfi | PartNumber: WALFRONT9qma70ypfi
High In Safety: Equipped With Overcurrent Protection Resistors At Each Input End Of The String, Ensuring Safety. Also Equipped With Automatic Voltage Detection And Analysis Function, It Is Convenient To Understand The Battery Balance Situation..
Good Protection: Add A Small Short Circuit Breaker Device For Over Temperature And Over Current Protection, Which Can Control The Sudden Abnormal Excessive Current, Break The Circuit At Over Temperature, And Protecting The Battery Pack From Normal And Continuous Balance..
Premium Design: Equipped With Led High Definition Digital Display Screen For Clearer Data Observation. Design Of Inverter Heat Dissipation Under Extreme Balance Of High Voltage Difference..
Auto Balancing: Intelligent Mcu Chip Master Management, Which Can Achieve Automatic And Autonomous Balancing Work. Automatically Detect The Minimum Voltage Of The Battery, Stop Working When The Battery Has Low Energy, And Protecting The Battery From Power Loss..
Features
- Stable Working: Nano amorphous isolated fully symmetrical transformer, ensuring minimum pressure difference. Ultra low internal resistance MOS devices form an ultra low dynamic impedance inverter circuit, achieving high power balancing operation.
- Auto Balancing: Intelligent MCU chip master management, which can achieve automatic and autonomous balancing work. Automatically detect the minimum voltage of the battery, stop working when the battery has low energy, and protecting the battery from power loss.
- High in Safety: Equipped with overcurrent protection resistors at each input end of the string, ensuring safety. Also equipped with automatic voltage detection and analysis function, it is convenient to understand the battery balance situation.
- Premium Design: Equipped with LED high definition digital display screen for clearer data observation. Design of inverter heat dissipation under extreme balance of high voltage difference.
- Good Protection: Add a small short circuit breaker device for over temperature and over current protection, which can control the sudden abnormal excessive current, break the circuit at over temperature, and protecting the battery pack from normal and continuous balance.
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon #19
16S Active Battery Equalizer, 16S 1.2A Active Battery Equalizer 2-4.5V Inductive Battery Pack Balancer Board, Power Converters
Asin: B0BRBDR2DB | Model: Hilitandiwg18659o2 | PartNumber: Hilitandiwg18659o2
Good Performance: When Charging And Discharging On The Battery Pack, There Is An Adjacent Voltage Difference To Trigger Equalization Work, Reducing Battery Maintenance Costs..
Voltage Difference: When The Adjacent Voltage Difference Is Above 0.1V, The Chip Will Trigger Equalization Work, And It Will Stop Working Until The Battery Voltage Difference Is Within 0.03V..
Applicable Battery: The 16S Active Battery Equalizer Is Universal For Ternary Iron Lithium Batteries, Equipped With Connecting Wire, With Stable Connection And Reliable Performance..
Resistance And Current: The Active Equalizer Has Built In Ultra Low Internal Resistance Mos, The Balance Current Is 0‑1.2A, And The Static Power Consumption Does Not Exceed 20Μa..
Features
- MAIN PURPOSE: Inductive energy transfer equalization board, 1.2A high current, can significantly balance the battery voltage and improve the overall efficiency of the battery pack.
- RESISTANCE AND CURRENT: The active equalizer has built in ultra low internal resistance MOS, the balance current is 0 1.2A, and the static power consumption does not exceed 20 A.
- GOOD PERFORMANCE: When charging and discharging on the battery pack, there is an adjacent voltage difference to trigger equalization work, reducing battery maintenance costs.
- APPLICABLE BATTERY: The 16S active battery equalizer is universal for ternary iron lithium batteries, equipped with connecting wire, with stable connection and reliable performance.
- VOLTAGE DIFFERENCE: When the adjacent voltage difference is above 0.1V, the chip will trigger equalization work, and it will stop working until the battery voltage difference is within 0.03V.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon #20
3S 4S 5A Active Equalizer Whole Group Balancer Lifepo4 Lipo Lto Lithium Active Battery Energy Transfer Equalization Capacitor + Test Board
Asin: B0BYFB7YY9
[Protection Switch]: With Sleep Protection, When The Voltage Is Lower Than 3V, It Will Automatically Stop And Enter The Sleep State To Reduce The Damage To The Battery..
[Satisfactory Service]: We Provide 24-Hour Online Service,If You Encounter Any Problems, Please Email Seller Support (Not Amazon Support), We Will Give You A Perfect Solution..
[Original Design]:Using The Original Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Equalizing Current 0-5.5A, The More Balanced The Battery, The Lower The Current..
[Capacitance Principle]: No External Power Supply Is Required,The Working Principle Is Capacitor Fit Transfers The Charge Transporter, Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack.The Equalization Board Can Be Connected To The Battery To Start The Equalization Work..
Features
- [Product Information]: Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout.Model:3S-4S Suitable : Lithium Iron Phosphate, NCM Ternary Polymer,(Not Fit Lithium Titanate) ,Voltage is 1.8 V-4.5V ,Suggest Battery Capacity: 60-300AH.
- [Capacitance Principle]: No external power supply is required,The working principle is Capacitor fit transfers the charge transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack.the equalization board can be connected to the battery to start the equalization work.
- [Protection switch]: With sleep protection, when the voltage is lower than 3V, it will automatically stop and enter the sleep state to reduce the damage to the battery.
- [Original Design]:using the original ultra-low internal resistance MOS, 2OZ copper thickness PCB, equalizing current 0-5.5A, The more balanced the battery, the lower the current.
- [Satisfactory Service]: We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.
- See more on Amazon...
Brand: Cywhrvzsf | Manufacturer: Cywhrvzsf
Warranty: 1YEAR
See On Amazon
Looking For Something Else?
Search