Rf Logarithmic Detector High for Speed Drive Differential for Fine Workmanship Single Ended Meter Ad8138 Measuring Meter Logarithmic
Asin: B0CYY84J25 | Model: Genericoi9b6e3ggz | PartNumber: Genericoi9b6e3ggz
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Selling Summary: High For Speed Processing, Selling Description Using High For Speed Processing Technology To For Ensure Accurate Measurement Of And Processing, Both For Speed And Efficiency Have Been Improved..
Use Indication: Externally Adjust And Low Harmonic Distortion. Make Adjustments According To Your Needs..
And : For Pcb Board Is Adopted By The Logarithmic Detector, Precisely Circuit, And To Use..
Sell_Point.
Features
- Easy To Use: Single ended to poor or poor to poor conversion. Adjusting the output common voltage. Check for use experience!
- sell_point
- Selling Summary: high for speed processing, selling description using high for speed processing technology to for ensure accurate measurement of and processing, both for speed and efficiency have been improved.
- And : for pcb board is adopted by the logarithmic detector, precisely circuit, and to use.
- Use Indication: Externally adjust and low harmonic distortion. Make adjustments according to your needs.
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon Similar To Rf Logarithmic Detector High for
#1
YWBL-WH Logarithmic Power Detector Meter AD8317 1M-10GHz 60dB RF Power Meter Logarithmic Detector Controller for Amplifier 50 Ohms, Module
Asin: B07RXZBJ74 | Model: YWBL WH | PartNumber: YWBL WH | Ean: 0701069457384 | UPC: 701069457384
55Db---The Greater The Amplitude Or Power Of The Rf , The Higher The Output Voltage, And The Output Voltage Is Directly Proportional To The Logarithm Of The Input Amplitude, Thus Expanding The Dynamic Range Of The Detected , Which Ranges Reach 55Db.
Wide Application---The Logarithmic Power Detector Could Be Widely Used Radio Frequency Detection, Power Measurement, Environmental Field Strength Detection, Or As A Part Of Automatic Gain Control And Automatic Level Control.
55Dbm To 0Dbm---The Logarithmic Power Detector Can Detect Power In -55Dbm To 0Dbm Of An Rf , So That The Rf Is Converted To Dc Voltage Output.
Application Areas---The Logarithmic Power Detector Could Be Used For Rf Transmitter Pa Set Point Control And Level Monitoring; Power Monitoring In A Radio Line Transmitter; Rssi Measurements In Base Stations, Wlan, Wimax, And Radar.
Features
- AD8317 CHIP---The logarithmic power detector is designed by using AD8317 chip, and is used for RF power detection
- APPLICATION AREAS---The logarithmic power detector could be used for RF transmitter PA set point control and level monitoring; Power monitoring in a radio line transmitter; RSSI measurements in base stations, WLAN, WiMAX, and radar
- 55dB---The greater the amplitude or power of the RF , the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input amplitude, thus expanding the dynamic range of the detected , which ranges reach 55dB
- 55dBm to 0dBm---The logarithmic power detector can detect power in -55dBm to 0dBm of an RF , so that the RF is converted to DC voltage output
- WIDE APPLICATION---The logarithmic power detector could be widely used radio frequency detection, power measurement, environmental field strength detection, or as a part of automatic gain control and automatic level control
- See more on Amazon...
Brand: YWBL-WH | Manufacturer: YWBL-WH
Dimensions: 2.36 x 3.15 x 2.76 Inches | Weight: 0.02 pounds
See On Amazon #2
Gigahertz Solutions HF35C High Frequency (HF) Electromagnetic Smog Meter
Asin: B01NBK9MKB
Accuracy: Basic Accuracy (Cw) Including Linearity Error: +/- 6 Db.
Average Operating Time: 6 - 7 Hours (Depending On Operating Mode), Low Battery Indicator, Auto Power Off Function.
Audio Analysis: Modulation Frequency And Field Strength-Proportional Audio Signal Supports The Identification Of Pulsed Radiation Sources (Gsm, Dect, Etc.) And The Detection Of Increased Exposure..
Power Supply: 9-Volt E-Block Alkaline Manganese Battery (Included).
Sensor: Logarithmic-Periodic Measuring Antenna.
Measuring Range : Power Flux Density: 0.1 - 1999 Μw/M².
Features
- Frequency range: 800MHz - 2.7GHz
- Measuring range : Power flux density: 0.1 - 1999 W/m
- Accuracy: Basic accuracy (CW) including linearity error: +/- 6 dB
- Sensor: Logarithmic-periodic measuring antenna
- Audio analysis: Modulation frequency and field strength-proportional audio signal supports the identification of pulsed radiation sources (GSM, DECT, etc.) and the detection of increased exposure.
- Power supply: 9-volt E-block alkaline manganese battery (included)
- Average operating time: 6 - 7 hours (depending on operating mode), low battery indicator, auto power off function
- See more on Amazon...
Brand: GIGAHERTZ SOLUTIONS | Manufacturer: Gigahertz Solutions
See On Amazon #3
Koolertron DDS Signal Generator Counter, 2.8in Screen Display 80MHz High Precision Dual-Channel Arbitrary Waveform Generator Frequency Meter 275MSa/s
Asin: B0BBQN37LS
[Using Dual-Channel Dds Signal And Ttl Electric Level Output To Generate Precise] Stable, Low Distortion Output Signal. Includes Sine Wave, Square Wave, Triangle Wave, Saw Tooth Wave, Pulse Wave, White Noise, User-Defined Waveform Etc. Each Channel Can Be Independently Set The Parameters..
[This Signal Generator] Is The Ideal Instrument For Electronic Engineering, Laboratories, Production Lines, Teaching And Scientific Research..
[Can Draw Arbitrary Waveform]：Pc Software And Communication Protocol Are Provided For Free, Arbitrary Waveforms Can Be Drawn Using The Pc Software; Using The Communication Protocol Can Be Secondary Development Programming; All Functions Of The Instrument Can Be Controlled By The Pc Software (The Instrument Can Be Also Finished All Operations Without Connecting To The Computer.).
Storage Feature: You Can Store 100 Groups Instrument State Parameters Set By The User, Can Be Called Up To Reproduce. Frequency Output Of Sine Wave Can Be Up To 80Mhz. 275Msa/S Sampling Rate. Waveform Length Of Each One Is 8192 And Vertical Resolution Is 14 Bits.
[Function Generators] With Linear Sweep(Max. Up To 999.9S) And Logarithmic Frequency Sweep Functions.Has A Frequency Measurement, Period Measurement, Positive And Negative Pulse Width Measurement And Counting Function..
[The Signal Generator Counter] Can Be Connected To The Mobile Phone For Control And Operation, Which Is Very Convenient. After Downloading The App, You Can View The Relevant Data On The Mobile Phone, And You Can Set All Functions Through The Mobile App, And Support The Import And Export Of Arbitrary Waveform Data, Which Is Convenient And Fast..
Features
- [Arbitray Waveform Generator] adopts large scale FPGA integrated circuit and high speed MCU microprocessor. The internal circuit adopts active crystal oscillator as benchmark. So the signal stability is greatly strengthened.
- [The Signal Generator Counter] can be connected to the mobile phone for control and operation, which is very convenient. After downloading the APP, you can view the relevant data on the mobile phone, and you can set all functions through the mobile APP, and support the import and export of arbitrary waveform data, which is convenient and fast.
- [Using Dual-channel DDS signal and TTL electric level output to generate precise] stable, low distortion output signal. includes Sine wave, Square wave, Triangle wave, Saw tooth wave, Pulse wave, white noise, user-defined waveform etc. each channel can be independently set the parameters.
- [Function Generators] With linear sweep(Max. up to 999.9s) and logarithmic frequency sweep functions.Has a frequency measurement, period measurement, positive and negative pulse width measurement and counting function.
- [Can Draw Arbitrary Waveform] PC software and communication protocol are provided for free, arbitrary waveforms can be drawn using the PC software; using the communication protocol can be secondary development programming; all functions of the instrument can be controlled by the PC software (The instrument can be also finished all operations without connecting to the computer.)
- Storage feature: You can store 100 groups instrument state parameters set by the user, can be called up to Reproduce. Frequency output of Sine wave can be up to 80MHz. 275MSa/s sampling rate. Waveform Length of each one is 8192 and vertical resolution is 14 bits
- [This Signal Generator] is the ideal instrument for electronic engineering, laboratories, production lines, teaching and scientific research.
- See more on Amazon...
Brand: Koolertron | Manufacturer: Koolertron
Weight: 3.13 Pounds
See On Amazon #4
RF Detector Module, Small and Compact Detector Module from 50 Hz to 3.8 GHz for Broadband Power Detection, RF Power Meter Logarithmic Detector Microwave Radio Frequency Detection Module
Asin: B0C3P8DBJS | Model: Gemerdyz43r9eb2 | PartNumber: Gemerdyz43r9eb2 | Ean: 7355777801538
【Widely Applications】Widely Used In Rf Detection, Power Measurement, Environmental Field Strength Detection, Rf Power Detector Can Also Be Used As Part Of Automatic Gain Control And Automatic Level Control. The Detector Module Is Small And Compact, Easy To Install And Use, And Has Strong Practicability..
【Excellent Material】The Rf Detector Is Made Of High Quality Circuit Board, Stable And Reliable. Can Detect The Rf Power Of Complex Modulated , Including Cdma, W‑Cdma, 8Psk, Qam And Ofdm. As A Reliable Seller, We Always Do Our Best To Provide Good Quality And Excellent Service For Our Customers..
【Advantages】The Larger The Rf Amplitude Or Power Is, The Higher The Output Voltage Is, Which Is Proportional To The Logarithm Of The Input Amplitude, Thus Enlarging The Dynamic Range Of The Detected. This Module Is Suitable For Wide‑Band Power Detection, With Flat Input And Output Response..
【Product Brief】This Logarithmic Detector Is Used For Rf Power Detection With Detection Operating Frequency 50Hz-3.8Ghz. The Detection Slope Of This Input Can Be From -52 Dbm To +8Dbm. The Detector Module Is Mainly Used To Detect Some Useful Information In Fluctuating..
Features
- Premium Quality The power meter can detect a RF of power from -52 dBm to +8dBm and convert the RF into a DC voltage output, which has passed strict quality control, you can use it with confidence. Suitable for IS95, CDMA2000, 3GPP, GSM/EDGE, MMDS and other broadband access equipment.
- Product Brief This logarithmic detector is used for RF power detection with detection Operating Frequency 50Hz-3.8GHz. The detection slope of this input can be from -52 dBm to +8dBm. The detector module is mainly used to detect some useful information in fluctuating.
- Widely Applications Widely used in RF detection, power measurement, environmental field strength detection, rf power detector can also be used as part of automatic gain control and automatic level control. The detector module is small and compact, easy to install and use, and has strong practicability.
- Advantages The larger the RF amplitude or power is, the higher the output voltage is, which is proportional to the logarithm of the input amplitude, thus enlarging the dynamic range of the detected. This module is suitable for wide band power detection, with flat input and output response.
- EXCELLENT MATERIAL The RF detector is made of high quality circuit board, stable and reliable. Can detect the RF power of complex modulated , including CDMA, W CDMA, 8PSK, QAM and OFDM. As a reliable seller, we always do our best to provide good quality and excellent service for our customers.
- See more on Amazon...
Brand: Gemer | Manufacturer: Gemer
See On Amazon #5
1-600MHz RF Signal Power Meter Logarithmic Detector -74dBm to 18dBm Radio Frequency Detection
Asin: B07B6M2768 | Model: Walfrontrchfxmap34 | PartNumber: Walfrontrchfxmap34 | Ean: 0654936014572 | UPC: 654936014572
The Higher Radio Frequency Signal Range Or Power Is, The Higher Output Voltage Will Be; Output Voltage Is Proportional To Logarithm Of Input Signal Range.
It Can Be Made Into 1Mw ~ 1Kw Rf Power Meter After Appropriate Transformation.
Widely Used For Rf Signal Detection, Signal Power Measurement, Environment Field Strength Detection, Can Also Be Used As A Part Of Automatic Gain Control And Automatic Level Control.
It Can Detect A Rf Signal Of Power From -74Dbm To 18Dbm, And Convert The Rf Signal Into A Dc Voltage Output.
Features
- The detector is is used for RF signal power detection of frequency range between 1MHZ and 600MHZ
- It can detect a rf signal of power from -74dBm to 18dBm, and convert the RF signal into a DC voltage output
- The higher radio frequency signal range or power is, the higher output voltage will be; output voltage is proportional to logarithm of input signal range
- Widely used for RF signal detection, signal power measurement, environment field strength detection, can also be used as a part of automatic gain control and automatic level control
- It can be made into 1mw ~ 1kw RF power meter after appropriate transformation
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.02 pounds
See On Amazon #6
RF Detector Module -72dBm-2dBm RF Power Meter Logarithmic Detector Microwave Radio Frequency Detection Module
Asin: B09R4YG1GD | Model: Hilitand16gvzqaehi6520 | PartNumber: Hilitand16gvzqaehi6520 | Ean: 5785646107416
Widely Applications: Widely Used In Rf Detection, Power Measurement, Environmental Field Strength Detection, Can Also Be Used As Part Of Automatic Gain Control And Automatic Level Control..
Advantages: The Larger The Rf Amplitude Or Power Is, The Higher The Output Voltage Is, Which Is Proportional To The Logarithm Of The Input Amplitude, Thus Enlarging The Dynamic Range Of The Detected That Is Up To 70Db..
Notice: As A Reliable Seller, We Always Do Our Best To Provide Good Quality And Excellent Service For Our Customers. Your Trust And Your Business Is So Important To Us..
Product Brief: This Logarithmic Detector Is Used For Rf Power Detection With Detection Frequency Ranging 0.1-2.5 Ghz. The Detection Slope Of This Logarithmic Detector Is 18Mv/Dbm (Typical Value)..
Features
- Premium Quality: The power meter can detect a RF of power from -72dBm to -2dBm and convert the RF into a DC voltage output, which has passed strict quality control, you can use it with confidence.
- Product Brief: This logarithmic detector is used for RF power detection with detection frequency ranging 0.1-2.5 GHz. The detection slope of this logarithmic detector is 18mV/dBm (typical value).
- Widely Applications: Widely used in RF detection, power measurement, environmental field strength detection, can also be used as part of automatic gain control and automatic level control.
- Notice: As a reliable seller, we always do our best to provide good quality and excellent service for our customers. Your trust and your business is so important to us.
- Advantages: The larger the RF amplitude or power is, the higher the output voltage is, which is proportional to the logarithm of the input amplitude, thus enlarging the dynamic range of the detected that is up to 70dB.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 0.00 x 0.00 x 0.00 Inches
See On Amazon #7
Logarithmic Detector Logarithmic Power Meter AD8317 1M-10GHz 60dB RF Power Meter Amplifier Controller
Asin: B07Y8HSC3Z | Model: AD8317 | PartNumber: AD8317 | Ean: 0719233403167 | UPC: 719233403167
✔ Rf Range -- The Greater The Amplitude Or Power Of The Rf , The Higher The Output Voltage, And The Output Voltage Is Directly Proportional To The Logarithm Of The Input Amplitude, Thus Expanding The Dynamic Range Of The Detected , Which Ranges Reach 55Db..
✔ Wide Application -- Application: Rf Transmitter Pa Set Point Control And Level Monitoring; Power Monitoring In A Radio Line Transmitter; Rssi Measurements In Base Stations, Wlan, Wimax, And Radar..
✔ Gain Control -- It Can Be Widely Used In Radio Frequency Detection, Power Measurement, Environmental Field Strength Detection. It Can Also Be Used As Part Of Automatic Gain Control And Automatic Level Control..
✔ Range -55 To 0Dbm -- Can Detect Power In -55Dbm To 0Dbm Of An Rf , So That The Rf Is Converted To Dc Voltage Output..
Features
- DETECT RF -- The product is designed by using AD8317 chip, and is used for RF power detection.
- RANGE -55 to 0DBM -- Can detect power in -55dBm to 0dBm of an RF , so that the RF is converted to DC voltage output.
- RF RANGE -- The greater the amplitude or power of the RF , the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input amplitude, thus expanding the dynamic range of the detected , which ranges reach 55dB.
- GAIN CONTROL -- It can be widely used in radio frequency detection, power measurement, environmental field strength detection. It can also be used as part of automatic gain control and automatic level control.
- WIDE APPLICATION -- Application: RF transmitter PA set point control and level monitoring; Power monitoring in a radio line transmitter; RSSI measurements in base stations, WLAN, WiMAX, and radar.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 2.36 x 3.15 x 2.76 Inches | Weight: 0.02 pounds
See On Amazon #8
RF Power Meter, AD8317 Logarithmic Detector RF Signal Log Output Power Meter 1M-10000MHz Controller
Asin: B0C4MBJRTK | Model: Qiiluuqb2wc5iv4 | PartNumber: Qiiluuqb2wc5iv4
[ Excellent Performance ] --- The Greater The Rf Signal Amplitude Or Power, The Higher The Output Voltage, And The Output Voltage Is Proportional To The Logarithm Of The Input Signal Amplitude, Which Expands The Dynamic Range Of The Detected Signal By 55Db.
[ Precise Design ] --- Spi Interface Is Easy To Connect With Arno And Single Chip Microcomputer With 2.54Mm Pitch Pins.
[ Wide Application ] --- Widely Applied To Rf Signal Detection, Signal Power Measurement, Environmental Field Strength Detection, And Can Also Be Used As An Integral Part Of Automatic Gain Control And Automatic Level Control.
[ Detection Range ] --- Detection Frequency Range Is 1M-10Ghz, Which Can Detect An Rf Signal With A Power Of -55Dbm To -0Dbm, And Convert This Rf Signal Into Dc Voltage Output.
Features
- [ Function ] --- This power meter is designed with for ADI's AD8317 chip and used for RF signal power detection
- [ Detection Range ] --- Detection frequency range is 1M-10GHz, which can detect an RF signal with a power of -55dBm to -0dBm, and convert this RF signal into DC voltage output
- [ Excellent Performance ] --- The greater the RF signal amplitude or power, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, which expands the dynamic range of the detected signal by 55dB
- [ Wide Application ] --- Widely applied to RF signal detection, signal power measurement, environmental field strength detection, and can also be used as an integral part of automatic gain control and automatic level control
- [ Precise Design ] --- SPI interface is easy to connect with arno and single chip microcomputer with 2.54mm pitch pins
- See more on Amazon...
Brand: Qiilu | Manufacturer: Qiilu
See On Amazon #9
AD8361 RF Detector RF Microwave Real Power Detector AM Amplitude Modulation Bug Detection Module
Asin: B0785NVN1H | Model: AD8361 | PartNumber: AD8361 | Ean: 0663862491418 | UPC: 663862491418
The Operating Frequency Range Is 10Khz-2500Mhz.
The Rf Connector Of This Rf Detector Board Is Standard Sma Female.
Application Scope: Power Meter, Level Tester, Power Sampling, Test And Debugging.
The Rf Signal Is Converted Into A Voltage Output. Rf Signal Corresponding To The Amplitude Or Power Of The Output Voltage.
Features
- Adopts high quality circuit board, stable and reliable
- The RF signal is converted into a voltage output. RF signal corresponding to the amplitude or power of the output voltage
- The operating frequency range is 10KHZ-2500MHZ
- Application scope: power meter, level tester, power sampling, test and debugging
- The RF connector of this RF detector board is standard SMA female
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.02 pounds
See On Amazon #10
RF Power Amplifier RF2126 400 2700MHz 2.4GHZ 1W Amplifier with Heatsink Operating Frequency 400-2700mhz Logarithmic Detector Amplifiers
Asin: B0C27F2CNS | Model: POCREATIONbi068drzms | PartNumber: POCREATIONbi068drzms
Important Parameters : Model Rf2126, Operating Frequency 400 ‑ 2700Mhz, Input And Output Impedance 50 Ω.
Increased Stability : The Input And Output Use High Frequency Low Resistance Capacitance, Greatly Reduce The Output Ripple.
Ensure Efficient Current Flow : Pcb Adopts 1.6Mm Thick Double Sided Plate, 1.5 Oz Copper Thick, Spray Tin Whole Process, To Ensures The Good Flowing Performance Of The Current.
Durable Material : Rf Power Amplifier Is Made Of Pcb And Aluminum Alloy Materials, Ensuring Maximum Durability.
Features
- Large Area Heat Dissipation : Large heat dissipation area can better maintain long term operation and reliable use
- Durable Material : RF Power Amplifier is made of PCB and aluminum alloy materials, ensuring maximum durability
- Important Parameters : Model RF2126, operating frequency 400 2700MHz, input and output impedance 50
- Ensure Efficient Current Flow : PCB adopts 1.6mm thick double sided plate, 1.5 Oz copper thick, spray tin whole process, to ensures the good flowing performance of the current
- Increased Stability : The input and output use high frequency low resistance capacitance, greatly reduce the output ripple
- See more on Amazon...
Brand: POCREATION | Manufacturer: POCREATION
See On Amazon #11
Garosa Logarithmic Detector 0.1-2.5GHz AD8313 Amplifiers Log Output Power Meter Controller Measurement Power Meter for Detection
Asin: B08KS1L4FX | Model: AD8313 | PartNumber: AD8313
This Power Meter Is Designed With For Adi's Ad8313 Chip And Used For Rf Power Detection.Detection Frequency Range Is 0.1-2.5Ghz, And Can Convert This Rf Into Dc Voltage Output.
If You Have Any Questions About The Product Or Are Not Satisfied With The Product, Please Feel To Contact Us And We Will Provide You With The Best Solution..
Widely Applied To Rf Detection, Power Measurement, Environmental Field Strength Detection.
The Greater The Rf Amplitude Or Power, The Higher The Output Voltage, And The Output Voltage Is Proportional To The Logarithm Of The Input Amplitude, Which Expands The Dynamic Range Of The Detected.
Features
- This logarithmic detector can withstand high and low temperatures, stable and durable for a long service life
- The greater the RF amplitude or power, the higher the output voltage, and the output voltage is proportional to the logarithm of the input amplitude, which expands the dynamic range of the detected
- This power meter is designed with for ADI's AD8313 chip and used for RF power detection.Detection frequency range is 0.1-2.5GHz, and can convert this RF into DC voltage output
- Widely applied to RF detection, power measurement, environmental field strength detection
- If you have any questions about the product or are not satisfied with the product, please feel to contact us and we will provide you with the best solution.
- See more on Amazon...
Brand: Garosa | Manufacturer: Garosa
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.02 pounds
See On Amazon #12
HiLetgo 0.1-440 MHz AD8310 RSSI High Speed High Frequency RF Output Log Detector Power Meter Board Demodulator Module 7-15V 12mA
Asin: B07X3497BZ | Model: AD8310 | PartNumber: AD8310
Detection Intercept: -108 Dbv.
Operating Voltage: 7-15V (With Lm78l05 Regulator Chip).
Dynamic Range: -77Dbm To +18 Dbm (95 Db).
Detection Slope: +24 Mv / Db.
Features
- Operating frequency: 0.1--440 MHz
- Detection slope: +24 mV / dB
- Detection intercept: -108 dBV
- Dynamic range: -77dBm to +18 dBm (95 dB)
- Operating voltage: 7-15V (with LM78L05 regulator chip)
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #13
Taidacent AD8318 RF Logarithmic Detector 70dB RSSI Measurement Spectrum Analyz Power Meter 1-8000MHz RF Log Detector Circuit
Asin: B07Y5C1CJJ | Model: AD8318 | PartNumber: AD8318 | Ean: 0734831000891 | UPC: 734831000891
Detection Slope: -25 Mv/Db (Typical).
He Power Supply Voltage: 7--15Vdc (Including Power Supply Voltage Regulator Circuit).
Detection Output Voltage Range: 0.5--2.1V.
Dynamic Range: -65Dbm To +5Dbm.
Features
- working frequency: 1-8000MHz
- Dynamic range: -65dBm to +5dBm
- Detection slope: -25 mV/dB (typical)
- detection output voltage range: 0.5--2.1V
- he power supply voltage: 7--15VDC (including power supply voltage regulator circuit)
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taida
See On Amazon #14
AD8302 RF/IF Phase Detector Module LF-2.7G Phase Detection Bandwidth Module
Asin: B07KJLLG4D | Model: 9687283011 | PartNumber: 9687283011 | Ean: 0794419329851 | UPC: 794419329851
[Multi-Function]:This Phase Detector Module Remote System Monitoring And Diagnostics, Return Loss/Vswr Measurements And Log Ratio Function For Ac ..
[Input Range]:Input Range -60 Dbm To 0 Dbm In A 50 Ω System..
[Dual Demodulating]:This Is A Dual Demodulating Log Amps And Phase Detector..
[High Accuracy]:Precise Rf Power Control, Accurate Gain Measurement Scaling (30 Mv/Db), Typical Nonlinearity < 0.5 Db, Typical Nonlinearity < 1 Degree..
Features
- [2.7 GHz]:The measures gain/loss and phase up to 2.7 GHz.
- [High accuracy]:Precise RF power control, accurate gain measurement scaling (30 mV/dB), typical nonlinearity < 0.5 dB, typical nonlinearity < 1 degree.
- [Multi-function]:This phase detector module remote system monitoring and diagnostics, return Loss/VSWR measurements and log ratio function for AC .
- [Dual demodulating]:This is a dual demodulating log amps and phase detector.
- [Input range]:Input range -60 dBm to 0 dBm in a 50 system.
- See more on Amazon...
Brand: Walfront
Dimensions: 3.94 x 3.94 x 1.57 Inches | Weight: 0.02 pounds
See On Amazon #15
AD8307 RF Power Meter, Keenso AD8307 RF Power Meter Logarithmic Testing Detector 0.1600M 75~15dBm Module with Case
Asin: B07RDBQSWT | Model: AD8307 | PartNumber: AD8307 | Ean: 0753874702746 | UPC: 753874702746
【High Performance】-- Ad8307 Rf Power Meter With Excellent Power Non-Sensitivity And Temperature Stability..
【Widely Applications】-- Widely Used For Converting Signal Level Into Db Form, Transmitter Antenna Power Measurement, Received Signal Strength Indicator(Rssi), Low-Cost Radar And Sonar Signal Processing, Network And Spectrum Analyzer (Reaching 120 Db), Determining Signal Level Is As Low As 20 Hz, Multimeter True Db Communication Mode..
【High Quality】-- Model: Ad8307 ; Input Power Default Range: -75 ~ +15 Dbm; Power Supply Voltage: 6 ~ 12 V@ < 10Ma. Weight: 37 G / 1.3 Oz(Approx.)It Has A Frequency Range From If To Uhf Audio..
【Practical Kit】-- This Device Features Low Cost, Small Size, Low Power Consumption, High Precision And High Stability, Wide Dynamic Range..
Features
- Main Function -- AD8307 RF Power is suitable for a variety of applications which need to reduce signal to decibel equivalent.
- Practical Kit -- This device features low cost, small size, low power consumption, high precision and high stability, wide dynamic range.
- High Performance -- AD8307 RF Power Meter with excellent power non-sensitivity and temperature stability.
- High Quality -- Model: AD8307 ; Input power default range: -75 ~ +15 dbm; Power supply voltage: 6 ~ 12 V@ < 10mA. Weight: 37 g / 1.3 oz(approx.)It has a frequency range from IF to UHF audio.
- Widely Applications -- Widely used for converting signal level into dB form, transmitter antenna power measurement, received signal strength indicator(RSSI), low-cost radar and sonar signal processing, network and spectrum analyzer (reaching 120 dB), determining signal level is as low as 20 Hz, multimeter true dB communication mode.
- See more on Amazon...
Brand: Keenso | Manufacturer: Keenso
Dimensions: 0.00 x 0.00 x 0.00 Inches
See On Amazon #16
AD8307 RF Logarithmic Power Meter, Keenso AD8307 RF Power Meter Logarithmic Testing Detector 0.1600M 75~15dBm Module
Asin: B07RKHD86B | Model: AD8307 | PartNumber: AD8307 | Ean: 0753874702111 | UPC: 753874702111
【Main Function】-- It Is Suitable For A Variety Of Applications Which Need To Reduce Signal To Decibel Equivalent.The Rf Signal Corresponding To The Amplitude Or Power Of Output Voltage Is The Best Choice To Improve The Accuracy Of If Signal Measurement Chip..
【Widely Applications】-- This Ad8307 Rf Power Meter Widely Used For Converting Signal Level Into Db Form, Transmitter Antenna Power Measurement, Received Signal Strength Indicator(Rssi), Low-Cost Radar And Sonar Signal Processing, Network And Spectrum Analyzer (Reaching 120 Db), Determining Signal Level Is As Low As 20 Hz, Multi-Meter True Db Communication Mode..
【High Performance】--The Rf Detector Adopts Ad8307 Chip, And The Design Of Power Supply Voltage Regulation Circuit Makes The Detection Accuracy Tend To Official Data, With Excellent Power Non-Sensitivity And Temperature Stability..
【Compact Size】-- This Device Features Low Cost, Small Size, Low Power Consumption, High Precision And High Stability, Wide Dynamic Range. It Has A Frequency Range From If To Uhf Audio..
Features
- High Quality -- Model: AD8307; Input power default range: -75 ~ +15 dbm; Power supply voltage: 6 ~ 12 V@ < 10mA; Weight: 6 g / 0.2 oz(approx).
- Compact Size -- This device features low cost, small size, low power consumption, high precision and high stability, wide dynamic range. It has a frequency range from IF to UHF audio.
- Main Function -- It is suitable for a variety of applications which need to reduce signal to decibel equivalent.The RF signal corresponding to the amplitude or power of output voltage is the best choice to improve the accuracy of IF signal measurement chip.
- High Performance --The RF detector adopts AD8307 chip, and the design of power supply voltage regulation circuit makes the detection accuracy tend to official data, with excellent power non-sensitivity and temperature stability.
- Widely Applications -- This AD8307 RF Power Meter widely used for converting signal level into dB form, transmitter antenna power measurement, received signal strength indicator(RSSI), low-cost radar and sonar signal processing, network and spectrum analyzer (reaching 120 dB), determining signal level is as low as 20 Hz, multi-meter true dB communication mode.
- See more on Amazon...
Brand: Keenso | Manufacturer: Keenso
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.02 pounds
See On Amazon #17
RF Detector Module,1PC AD8361 RF Microwave Real Power Detector AM Detector Amplitude Detection
Asin: B0B62KDBNW
【Stable And Reliable】: Using High-Quality Circuit Boards, Stable And Reliable.
【Frequency Range】: Working Frequency Range 10Khz-2500Mhz.
【Rf Signal】: Rf Signal Is Converted Into Voltage Output. Rf Signal Corresponding To Output Voltage Amplitude Or Power.
【Rf Connector】: The Rf Connector Of This Rf Detector Board Is A Standard Sma Female Header.
Features
- Application : Power meter, level tester, power sampling, test debugging
- RF Connector : The RF connector of this RF detector board is a standard SMA female header
- Stable and Reliable : Using high-quality circuit boards, stable and reliable
- RF Signal : RF signal is converted into voltage output. RF signal corresponding to output voltage amplitude or power
- Frequency Range : Working frequency range 10KHZ-2500MHZ
- See more on Amazon...
Brand: Tefola | Manufacturer: Tefola
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.02 pounds
See On Amazon #18
Bindpo RF Logarithmic Detector, 1M-10000MHz AD8317 Radio Frequency Logarithmic Detector Power Meter, for RF Power Detection/Radio Frequency Detection
Asin: B08QFT32M5 | Model: AD8317 | PartNumber: AD8317 | Ean: 9588107683148
The Greater The Amplitude Or Power Of The Rf , The Higher The Output Voltage, And The Output Voltage Is Directly Proportional To The Logarithm Of The Input Amplitude, Thus Expanding The Dynamic Range Of The Detected , Which Ranges Reach 55Db..
It Can Also Be Used As Part Of Automatic Gain Control And Automatic Level Control..
It Can Be Widely Used In Radio Frequency Detection, Power Measurement, Environmental Field Strength Detection..
Can Detect Power In -55Dbm To -0Dbm Of An Rf , So That The Rf Is Converted To Dc Voltage Output..
Features
- The product is designed by using AD8317 chip, and is used for RF power detection.
- Can detect power in -55dBm to -0dBm of an RF , so that the RF is converted to DC voltage output.
- The greater the amplitude or power of the RF , the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input amplitude, thus expanding the dynamic range of the detected , which ranges reach 55dB.
- It can be widely used in radio frequency detection, power measurement, environmental field strength detection.
- It can also be used as part of automatic gain control and automatic level control.
- See more on Amazon...
Brand: Bindpo | Manufacturer: Bindpo
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.02 pounds
See On Amazon #19
Dewedrt AD8307 RF Power Meter Logarithmic Detector Power Detection 1-600MHz RF Detector Power Meter
Asin: B0CQCRGHFM | Model: 500298233 | PartNumber: 500298233 | Ean: 4713470634632
High Stability Over The Entire Temperature Range..
It Can Be Widely Used In Rf Signal Detection, Signal Power Measurement, Environmental Field Strength Detection, And Can Also Be Used As A Component Of Automatic Gain Control And Automatic Level Control..
It Is Used For Rf Signal Power Detection, The Detection Frequency Range Is 1Mhz - 600Mhz, It Can Detect A Rf Signal With A Power Of -74Dbm To 18Dbm, And Convert Such A Rf Signal Into A Output..
Complete Differential Dc-Coupled Signal Path..
Features
- The greater the amplitude or power of the RF signal, the higher the output voltage, which is proportional to the of the amplitude of the input signal, thus expanding the dynamic range of the detected signal, which reaches 92dB.
- Complete differential DC-coupled signal path.
- High stability over the entire temperature range.
- It is used for RF signal power detection, the detection frequency range is 1MHZ - 600MHZ, it can detect a RF signal with a power of -74dBm to 18dBm, and convert such a RF signal into a output.
- It can be widely used in RF signal detection, signal power measurement, environmental field strength detection, and can also be used as a component of automatic gain control and automatic level control.
- See more on Amazon...
Brand: Dewedrt | Manufacturer: Dewedrt
Dimensions: 0.39 x 2.36 x 2.36 Inches | Weight: 0.01 pounds
See On Amazon #20
RF Power Meter Logarithmic Detector, High Dynamic Range 75dBm to 16dBm 50Hz to 3.8GHz AD8362 Radio Frequency Detection, Professional Power Meter for Testing Power
Asin: B0C9HL1RJS | Model: Pyhodiwtp4i3dsgb | PartNumber: Pyhodiwtp4i3dsgb
Controller Mode: Set A Reference Voltage Value At The Vset End. When The Power Voltage Value Detected By Ad8362 Is Greater Than The Reference Voltage Value, The Voltage Vout Outputs A High Level. When The Power Voltage Value Detected By Ad8362 Is Less Than The Reference Voltage Value, The Voltage Vout Uses Ad8307 To Measure Power..
Wide Utility: True Rms Power Detection Ad8362 Is A Power Detector With True Rms Response. Its Measurement Results Are Independent Of The Waveform And Can Detect The Rf Power Of Complex Modulated , Including Cdma, W Cdma, 8Psk, Qam, And 0Fdm . It Is Suitable For Is95, Cdma2000, 3Gpp, Gsm/Edge, Mmds, And Other Broadband Access Devices..
Power Measurement Mode: The Vout And Vset Pins Are Directly Connected, And The Output Voltage Is Proportional To The Logarithm Of The Effective Value Of The Input Power. For Every 1Db Increase In The Input , The Output Voltage Vout Increases By 50 Mv, Up To Vs 0.1 V. The Voltage Reading Directly Reflects The Power..
Frequency Band: The Working Frequency Can Range From 50Hz To 3.8Ghz, Suitable For Broadband Power Detection, With Flat Input And Output Responses. Equipped With Shielding Shell And Anti Reverse Connection Diode. This Working Mode Is Suitable For Use As A Power Meter Or For Power Detection In Equipment..
Features
- High Dynamic Range: The input dynamic range can get to 65dB, and in a 50 day system, its input can range from -75 dBm to 16 dBm. High accuracy and linearity provide an accurate linear output voltage in dB, 50mV per dB. The typical linear slope is 0.025V/dB, and the measurement range is -75 dBm to +16 dBm.
- Frequency Band: The working frequency can range from 50Hz to 3.8GHz, suitable for broadband power detection, with flat input and output responses. Equipped with shielding shell and anti reverse connection diode. This working mode is suitable for use as a power meter or for power detection in equipment.
- Controller Mode: Set a reference voltage value at the VSET end. When the power voltage value detected by AD8362 is greater than the reference voltage value, the voltage Vout outputs a high level. When the power voltage value detected by AD8362 is less than the reference voltage value, the voltage Vout uses AD8307 to measure power.
- Power Measurement Mode: The VOUT and VSET pins are directly connected, and the output voltage is proportional to the logarithm of the effective value of the input power. For every 1dB increase in the input , the output voltage Vout increases by 50 mV, up to Vs 0.1 V. The voltage reading directly reflects the power.
- Wide Utility: True RMS power detection AD8362 is a power detector with true RMS response. Its measurement results are independent of the waveform and can detect the RF power of complex modulated , including CDMA, W CDMA, 8PSK, QAM, and 0FDM . It is suitable for IS95, CDMA2000, 3GPP, GSM/EDGE, MMDS, and other broadband access devices.
- See more on Amazon...
Brand: Pyhodi | Manufacturer: Pyhodi
See On Amazon
Looking For Something Else?
Search