Veemoon Easydriver Stepper Motor Driver Stepping
Asin: B0CZ29G83W | Model: ZMJ400216TV | PartNumber: ZMJ400216TV
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easydriver Stepper Motor Driver: Adjustable Current Control From 150Ma/Phase To 750Ma/Phase..
Motor Driver: And Broken Out To Change Microstepping Resolution To Full, Half, Quarter And Eighth Steps (Defaults To Eighth)..
Features
- Easydriver stepper: power supply range from 7v to 30v. the higher the voltage, the higher the torque at high speeds.
- Motor driver: and broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth).
- Easydriver stepper motor driver: adjustable current control from 150ma/phase to 750ma/phase.
- See more on Amazon...
Brand: Veemoon | Manufacturer: Veemoon
Dimensions: 1.97 x 1.97 x 1.97 inches | Weight: 0.02 Pounds
See On Amazon Similar To Veemoon Easydriver Stepper Motor Driver
#1
HiLetgo 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer Reprap Suitable for Mendel Huxley Arduino
Asin: B07BND65C8 | Model: 3-01-0108-5pcs | PartNumber: 3-01-0108-5pcs
Adjustable Current Control Lets You Set The Maximum Current Output With A Potentiometer.
Over-Temperature Thermal Shutdown, Under-Voltage Lockout, And Crossover-Current Protection.
Intelligent Chopping Control That Automatically Selects The Correct Current Decay Mode (Fast Decay Or Slow Decay).
Five Different Step Resolutions: Full-Step, Half-Step, Quarter-Step, Eighth-Step, And Sixteenth-Step. Output Drive Capacity Of Up To 35 V And ± 1.2 A.
Features
- Simple step and direction control interface,Take anti-static measures before you use the A4988 modules in case of short-circuit
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step. Output drive capacity of up to 35 V and 1.2 A
- Adjustable current control lets you set the maximum current output with a potentiometer
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #2
STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-Step Resolutions for Nema 17 and 23 Stepper Motor
Asin: B06Y5VPSFN | Model: DM542T | PartNumber: DM542T | Ean: 0715624558829, 0715776647549, 0714485410482 | UPC: 714485410482, 715624558829, 715776647549
1.0~4.2A, 20~50Vdc, 1/128 Microstep Resolution.
100% Service Satisfactory. We Provided This Stepper Motor Kit With 30 Days Free Replacement Or Refund, 1 Year Warranty And Whole Life Customer Service From The Date Of Purchasing..
Pulse Signal: 4-5V When Pul-High, 0-0.5V Whenpul-Low. The Same As Dir And Ena Signals.
Industrial-Grade Stepper Driver, Suit For Nema 17 And 23 Stepper Motor.
Features
- Stepper motor driver DM542T is updated to version V4.0, add 5V/24V logical voltage selector, alarm outputs. Please attention, Factory setting is 24V, if you need to use 5V, switch selector on the top of the driver.
- Industrial-grade Stepper Driver, Suit for Nema 17 and 23 Stepper Motor
- 1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution
- Pulse signal: 4-5V when PUL-HIGH, 0-0.5V whenPUL-LOW. The same as DIR and ENA signals
- 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing.
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OMC CORPORATION LIMITED
Dimensions: 1.00 x 0.00 x 2.97 inches | Weight: 0.46 Pounds
See On Amazon #3
EASON Stepper Motor Driver TB6600 4A DC9-42V 32 Subdivision for Nema 17, 23 Series Stepper Motor CNC Controller Single Axis Hybrid MicroStepping
Asin: B08SG7L54W | Ean: 0653871352206 | UPC: 653871352206
Suitable For Drive Two-Phase Stepping Motor Dynamic Voltage 9V To 42V, The Maximum Drive Current Is Less Than 4A..
Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
Suitable For Step Motor:Nema(17,23) 42, 57 Type 2 Phase 4 Phase (4 / 6 / 8 Wires).
The Subdivision Is Increased To 32 Subdivision, Which Is Suitable For High Subdivision..
Features
- This driver is an upgraded version of TB6600 and with plastic cover.
- The subdivision is increased to 32 subdivision, which is suitable for high subdivision.
- Suitable for drive Two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A.
- Suitable for step motor:NEMA(17,23) 42, 57 type 2 phase 4 phase (4 / 6 / 8 wires)
- Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- See more on Amazon...
Brand: Eason | Manufacturer: Yisheng Technology
Dimensions: 0.00 x 3.74 x 0.00 inches | Weight: 0.00 Pounds
See On Amazon #4
10 Pieces Stepper Motor Driver Module with Heat Sink Compatible with Stepstick Stepper A4988 3D Printer Reprap, CNC Machine or Robotics
Asin: B09FQ3G5XQ | Model: Photect-Driver Module-09 | PartNumber: Photect-Driver Module-09
Five-Step Resolution: There Are 5-Steps Resolution Of The Stepper Motor Drive Modules, Such As Full-Step, Half-Step, Quarter-Step, Eight-Step, Sixteen-Step, And The Output Drive Capacity Is Up To 35V And -2A~2A.
Wide Application: The Stepper Motor Drive Module Is Compatible With Stepper Motor/ 3D Printer/ Cnc/ Engraving Machine/ Supported 3D Printer And More; Please Confirm Whether The Product Model Is Suitable Before Buying.
Protection Function: The Stepper Motor Drive Modules Can Provide Thermal Shutdown Protection, Over Current Protection, Ground Fault Protection And Crossing Current Protection.
Easy To Operate: This Is A Complete Micro-Stepping Motor Driver With A Built-In Converter, Easy To Operate; When Micro-Stepping Is Running, The Chopper Control Compatible With A4988 Can Automatically Select The Current Decay Mode, Slow Or Mixed.
Features
- The package includes: you will receive 10 pieces of stepper motor drive modules and 10 heat sink in the package, enough quantity for your use and replacement
- Easy to operate: this is a complete micro-stepping motor driver with a built-in converter, easy to operate; When micro-stepping is running, the chopper control compatible with A4988 can automatically select the current decay mode, slow or mixed
- Five-step resolution: there are 5-steps resolution of the stepper motor drive modules, such as full-step, half-step, quarter-step, eight-step, sixteen-step, and the output drive capacity is up to 35V and -2A~2A
- Protection function: the stepper motor drive modules can provide thermal shutdown protection, over current protection, ground fault protection and crossing current protection
- Wide application: the stepper motor drive module is compatible with stepper motor/ 3D printer/ CNC/ engraving machine/ supported 3D printer and more; Please confirm whether the product model is suitable before buying
- See more on Amazon...
Brand: Photect | Manufacturer: Photect
See On Amazon #5
CNC Digital Stepper Driver DM556 Stepper Motor Controller 2-phase Stepper Motor Driver 20-50V DC Max 5.6A 128 subdivision For Nema 23, 24 and Nema 34 stepper motor
Asin: B08J3NFF9V | Ean: 0791548328502 | UPC: 791548328502
Anti-Resonance For Optimal Torque, Extra Smooth Motion, Low Motor Heating And Noise.
Please Note: If There Is Any Problem, Please Feel Free To Contact Us, Each Defect Items Could Be Refunded Or Reshipped, We Will Try Out Utmost To Support You..
Package: 1Piece Dm556 Driver.
This High Subdivision Driver Is Suitable For High Subdivision Motor. Suitable For Stepper Motor: 57,60,86 Type 2-Phase (4-Wire, 6-Wire, 8-Wire).
Features
- Suitable for Nema 23 ,Nema 24 and Nema34 Stepper Motor 2-phase hybrid stepper motors (Outer diameter: 57, 60,86mm).
- This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor: 57,60,86 type 2-phase (4-wire, 6-wire, 8-wire)
- Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
- Package: 1piece DM556 driver
- PLEASE NOTE: if there is any problem, please feel free to contact us, each defect items could be refunded or reshipped, we will try out utmost to support you.
- See more on Amazon...
Brand: HoCenWay | Manufacturer: HONGCHENWEI
Dimensions: 1.34 x 4.41 x 2.97 inches
See On Amazon #6
Usongshine Stepper Motor Driver TB6600 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Phase Hybrid Stepper Motor for CNC/42 57 86 Stepper Motor 3 pcs)
Asin: B088CRCMP7 | Model: TB6600-3pcs | PartNumber: TB6600-3pcs | Ean: 0778107677417 | UPC: 778107677417
✿The Largest 32 Subdivision Of The 6 Models Are Optional; Suitable For 4Wires, 6 Wires And 8 Wires Stepper Motor. It Can Control 2 Phase Stepper Motor Forward And Reverse Rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 Phase Excitation Mode..
✿Suitable For A Wide Range Of Stepping Motors Of Nema 17, 23 And 24 Can Used In Various Kinds Of Machines, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, Pick-Place Devices And So On..
✿Protect Form✿: Energy-Saving Semi-Automatic Current Lock Function, Built-In Temperature Protection And Over Current Protection, Under Voltage Protection, Preventing Reverse..
✿Stepper Motor Driver✿: 9V-42V Dc Power Supply, H Bridge Bipolar Constant Phase Flow Drive. The Maximum 4.0A Of The Eight Kinds Of Output Current..
Features
- Package included :3 x Stepper Motor Driver.
- Stepper Motor Driver : 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current.
- The largest 32 subdivision of the 6 models are optional; Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
- Protect form : Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection, under voltage protection, Preventing reverse.
- Suitable for a wide range of stepping motors of Nema 17, 23 and 24 can used in various kinds of machines, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, pick-place devices and so on.
- See more on Amazon...
Brand: Usongshine | Manufacturer: Usongshine
See On Amazon #7
OUYZGIA TB6600 Stepper Motor Driver 4A Stepper Driver for Nema 17, 23 and 34 Stepper Motor, 9-42V, 32 Segments, Upgraded Version-1PCS
Asin: B08PKJG2ND | Model: 200000142 | PartNumber: 200000142 | Ean: 0772985314471, 0770240308678 | UPC: 772985314471, 770240308678
Current And Voltage: Output Current: 0.5A-4.0A, The Maximum Output Current Is 4.0A. Input Voltage: 9-42Vdc, External Signal 3.3-24V Can Be Connected Directly Without Series Resistor.
High Compatibility: Suitable For All Brands Of 4/6/8 Wire 2/4 Phase Hybrid Stepper Motors. Suitable For Various Small And Medium-Sized Automation Equipment And Instruments, Such As: Engraving Machines, Marking Machines, Cutting Machines, Laser Illumination, Plotters, Cnc Machine Tools Etc.
Safe And Reliable: Overheat, Overcurrent, Undervoltage Lockout, Input Voltage Protection Against Reversal, Etc. Safer. The Current Is Automatically Halved At Standstill.
Subdivision Options: 1/2/4/8/16/32 Subdivision To Drive 4/6/8 Wire 2 Phase/4 Phase Hybrid Stepper Motors, (Current Less Than Or Equal To 4.0A). Compatible With Stepper Motors With Step Angles Of 1.8° And 0.9°.
Features
- Signal Input: Single-ended, pulse/direction. Optocoupler isolated signal input, strong anti-interference capability
- Subdivision Options: 1/2/4/8/16/32 subdivision to drive 4/6/8 wire 2 phase/4 phase hybrid stepper motors, (current less than or equal to 4.0A). Compatible with stepper motors with step angles of 1.8 and 0.9
- Current and Voltage: Output Current: 0.5A-4.0A, the maximum output current is 4.0A. Input voltage: 9-42VDC, external signal 3.3-24V can be connected directly without series resistor
- Safe and Reliable: Overheat, overcurrent, undervoltage lockout, input voltage protection against reversal, etc. Safer. The current is automatically halved at standstill
- High Compatibility: Suitable for all brands of 4/6/8 wire 2/4 phase hybrid stepper motors. Suitable for various small and medium-sized automation equipment and instruments, such as: engraving machines, marking machines, cutting machines, laser illumination, plotters, CNC machine tools etc
- See more on Amazon...
Brand: OUYZGIA | Manufacturer: OUYZGIA
See On Amazon #8
ALMOCN TB6600 Stepper Motor Driver 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Hybrid Stepper Motor for CNC (3pcs)
Asin: B09Y5G5YMS | Ean: 0701715475670 | UPC: 701715475670
Can Control 2 Phase Stepper Motor Forward And Reverse Rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 Phase Excitation Mode..
Application:Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
Over-Heat Protection:Stepper Motor Driver Not Only With Large Area Heat Sink And Automatic Semi-Flow,But Also With Overheat Circuit Protection..
The Largest 32 Subdivision Of The 6 Models Are Optional; Suitable For 4Wires, 6 Wires And 8 Wires Stepper Motor..
Features
- H bridge bipolar constant phase flow drive,9V-42V DC power supply.The maximum 4.0A of the eight kinds of output current.
- The largest 32 subdivision of the 6 models are optional; Suitable for 4Wires, 6 wires and 8 wires stepper motor.
- Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
- Over-Heat Protection:Stepper motor driver not only with large area heat sink and automatic semi-flow,but also with overheat circuit protection.
- Application:Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- See more on Amazon...
Brand: ALMOCN | Manufacturer: ALMOCN
See On Amazon #9
DAOKI 3D Expansion Board 42 Stepper Motor Driver DRV8825 A4988 3D Printer Control Shield Module for Arduino UNO R3 Ramps1.4 DIY Kit
Asin: B07YKH2JN8 | Model: GR-US-154 | PartNumber: GR-US-154 | Ean: 0886769929055 | UPC: 886769929055
Compatible With 12 / 24V Drive Scheme..
Applicable For A4988, Drv8825 Module, Reasonable Design, Easy For Installation..
Suitable For 42 Stepper Motor Drive, 3D Printers And Diy..
Terminal Power Connector For Easy Connection Drive Power..
Features
- On-board DIP switch, you can easily adjust the drive segments.
- Terminal power connector for easy connection drive power.
- Compatible with 12 / 24V drive scheme.
- Suitable for 42 stepper motor drive, 3D printers and DIY.
- Applicable for A4988, DRV8825 module, reasonable design, easy for installation.
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
See On Amazon #10
3 PCS of TB6600 Stepper Motor Driver, Abuff 5A 9-40V Nema 17 Stepper Motor Driver CNC Controller Single Axes Hybrid Stepper Motor Controls
Asin: B07GVFTHPT | Ean: 0663585692116 | UPC: 663585692116
【High Safety】Tb6600 Cnc Controller Support Interface That Adopts High-Speed Optocoupler Isolation And Protection For Input Anti-Revers，Over Current And Short Circuit..
【Work Quietly】The Cnc Controllers Are Designed With Extra-Low Motor Noise Which Can Offer Them Excellent Quietness..
【Wide Application】The Hybrid Stepper Motor Is Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
【Over-Heat Protection】Stepper Driver Is Not Only With Large Area Heat Sink And Automatic Semi-Flow To Reduce Heat But Also With Overheat Circuit Protection..
Features
- CONTROL & ADJUSTABLE TB6600 Stepper Motor Drivers support 8 kinds of current control and 7 kinds of micro steps adjustable so that can meet your different need.
- OVER-HEAT PROTECTION Stepper driver is not only with large area heat sink and automatic semi-flow to reduce heat but also with overheat circuit protection.
- HIGH SAFETY TB6600 CNC controller support interface that adopts high-speed optocoupler isolation and protection for input anti-revers over current and short circuit.
- WIDE APPLICATION The hybrid stepper motor is suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- WORK QUIETLY The CNC controllers are designed with extra-low motor noise which can offer them excellent quietness.
- See more on Amazon...
Brand: ABuff | Manufacturer: ABUFF
Weight: 0.44 Pounds
See On Amazon #11
Tofelf Stepper Motor Driver, Upgraded Version TB6600 Stepper Driver,4A 9-42V 32 Subdivision for Nema 17/23 Stepper Motor Single Axis Hybrid CNC Controller for CNC/42 57 86 Stepper Motor
Asin: B0BZYX7Z4Z | Model: TB6600 | PartNumber: TB6600 | Ean: 0760606098213 | UPC: 760606098213
✿Applicable To Various Stepper Motors Of Nema 17, 23 And 24, Which Work Well With Nema Motors And Can Also Be Used In Various Machines, Such As X-Y-Z Table, Labeling Machine, Laser Cutting Machine, Engraving Machine, Picking Device, Etc..
✿Suitable For College Students, Engineers, Technicians, Factory Individuals, Diy Electronics Enthusiasts, Etc..
✿Built-In Overheat Protection, Under-Voltage Protection And Over-Current Protection, With Energy-Saving Semi-Automatic Current-Lock Function, Single-Chip Pwm Bipolar Sinusoidal Chopper Ensures Low Vibration And High Efficiency.
✿9V-42V Dc Power Supply, Up To 4A In 8 Output Currents, H-Bridge Bipolar Constant Phase Current Drive, Fast Operation And Easy To Connect, Suitable For Long-Term Use.
Features
- Total 32 subdivisions in 6 modes to choose, can control 2-phase stepper motor forward and reverse, smooth operation and high power
- 9V-42V DC power supply, up to 4A in 8 output currents, H-bridge bipolar constant phase current drive, fast operation and easy to connect, suitable for long-term use
- Applicable to various stepper motors of Nema 17, 23 and 24, which work well with Nema motors and can also be used in various machines, such as X-Y-Z table, labeling machine, laser cutting machine, engraving machine, picking device, etc.
- Built-in overheat protection, under-voltage protection and over-current protection, with energy-saving semi-automatic current-lock function, single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency
- Suitable for college students, engineers, technicians, factory individuals, DIY electronics enthusiasts, etc.
- See more on Amazon...
Brand: Tofelf | Manufacturer: Tofelf
Dimensions: 2.80 x 3.80 x 1.10 inches | Weight: 0.11 Pounds
See On Amazon #12
HiLetgo 2pcs 3D Printer TMC2209 Stepper Motor Drive Module Replace TMC2208 A4988 LV8729 Super Silent
Asin: B0832SK397
Working Voltage: 3V/5V.
Configuration: Step/Dir Or Uart.
Microstepping: 256 Microstepping Subdivisions.
Drive Chip: Tmc2209.
Features
- TMC2209 Stepper Motor Drive Module
- Drive chip: TMC2209
- Working voltage: 3V/5V
- Microstepping: 256 microstepping subdivisions
- Configuration: STEP/DIR OR UART
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #13
KOOBOOK 5Pcs A3967 EasyDriver Shield Stepping Stepper Motor Driver For Arduino Support 4/6/8 Wires Stepper
Asin: B07SDL5KN1 | Model: KB059 | PartNumber: KB059 | Ean: 0682559866001 | UPC: 682559866001
Connect A 4-Wire Stepper Motor And A Microcontroller And You've Got Precision Motor Control!Easydriver Drives Bi-Polar Motors, And Motors Wired As Bi-Polar. I.E. 4,6, Or 8 Wire Stepper Motors..
The Microstep Select (Ms1 And Ms2) Pins Of The A3967 Are Broken Out Allowing Adjustments To The Microstepping Resolution. The Sleep And Enable Pins Are Also Broken Out For Further Control.Cjmcu Made..
On This Version (V4.4) We Fixed The Silk Error On The Min/Max Adjustment. It Provides Much More Flexibility And Control Over Your Stepper Motor, When Compared To Older Versions..
Easydriver Requires A 7V To 30V Supply To Power The Motor And Can Power Any Voltage Of Stepper Motor. The Easydriver Has An On Board Voltage Regulator For The Digital Interface That Can Be Set To 5V Or 3.3V..
Features
- A3967 Motor Driver
- EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V.
- Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.
- On this version (v4.4) we fixed the silk error on the min/max adjustment. It provides much more flexibility and control over your stepper motor, when compared to older versions.
- The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.cjmcu made.
- See more on Amazon...
Brand: KOOBOOK | Manufacturer: KOOBOOK
See On Amazon #14
SparkFun EasyDriver Stepper Motor Driver
Asin: B004G4XR60 | Model: SX09402 | PartNumber: SX09402 | Ean: 0845156594023 | UPC: 845156594023
Power Supply Range From 7V To 30V. The Higher The Voltage, The Higher The Torque At High Speeds.
Adjustable Current Control From 150Ma/Phase To 750Ma/Phase.
Features
- MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)
- Adjustable current control from 150mA/phase to 750mA/phase
- Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds
- See more on Amazon...
Brand: SparkFun | Manufacturer: Sparkfun Electronics
Dimensions: 0.39 x 3.31 x 2.68 inches | Weight: 0.01 Pounds
See On Amazon #15
4 Pack TB6600 4A 9-42V Stepper Motor Driver CNC Controller, Stepper Motor Driver Nema tb6600 Single Axes Two Phase Hybrid Stepper Motor for CNC
Asin: B07RRB6BGQ | Model: 0042 | PartNumber: 0042 | Ean: 0725756323042 | UPC: 725756323042
Energy-Saving Semi-Automatic Current Lock Function, Built-In Temperature Protection And Over Current Protection..
Only The Clock Pulse Signal Can Be Driven Two-Phase Bipolar Stepper Motor To Achieve Low Vibration, High Efficiency Work..
Can Control 2 Phase Stepper Motor Forward And Reverse Rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 Phase Excitation Mode..
The Maximum 4.0A Of The Eight Kinds Of Output Current. The Largest 32 Subdivision Of The 6 Models Are Optional..
Features
- 9V-42V DC power supply, H bridge bipolar constant phase flow drive.
- The maximum 4.0A of the eight kinds of output current. The largest 32 subdivision of the 6 models are optional.
- Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.
- Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.
- Only the clock pulse signal can be driven two-phase bipolar stepper motor to achieve low vibration, high efficiency work.
- See more on Amazon...
Brand: SZCY LLC | Manufacturer: SZCY LLC
See On Amazon #16
HiLetgo 1pc A4988 Stepstick Stepper Motor Driver Module + Heat Sink for 3D Printer Reprap Compatible to Arduino
Asin: B00LOF1CA2 | Model: 3-01-0108 | PartNumber: 3-01-0108 | Ean: 0797698770499 | UPC: 797698770499
Adjustable Current Control Lets You Set The Maximum Current Output With A Potentiometer.
Over-Temperature Thermal Shutdown, Under-Voltage Lockout, And Crossover-Current Protection.
Intelligent Chopping Control That Automatically Selects The Correct Current Decay Mode (Fast Decay Or Slow Decay).
Five Different Step Resolutions: Full-Step, Half-Step, Quarter-Step, Eighth-Step, And Sixteenth-Step. Output Drive Capacity Of Up To 35 V And ± 1.2 A.
Features
- Simple step and direction control interface,Take anti-static measures before you use the A4989 modules in case of short-circuit
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step. Output drive capacity of up to 35 V and 1.2 A
- Adjustable current control lets you set the maximum current output with a potentiometer
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #17
A4988 Stepper Motor Driver Module for Pololu RepRap 3D Printer StepStick (Pack of 2)
Asin: B07QT7N3T2 | Ean: 0732387204992 | UPC: 732387204992
Uses Just 2 Pins From The Microcontroller, One For Controlling The Rotation Direction And The Other For Controlling The Steps.
Over-Temperature Thermal Shutdown, Under-Voltage Lockout, And Crossover-Current Protection.
8V To 35V Output Voltage Range At Up To 2A Current.
Simple Step And Direction Control Interface With Five Step Resolutions: Full-Step, Half-Step, 1/4-Step, 1/8-Step, And 1/16-Step.
Features
- Control a bipolar stepper motor at up to 2 A current per phase. An onboard potentiometer is used to adjust the current output
- Simple step and direction control interface with five step resolutions: full-step, half-step, 1/4-step, 1/8-step, and 1/16-step
- Uses just 2 pins from the microcontroller, one for controlling the rotation direction and the other for controlling the steps
- 8V to 35V output voltage range at up to 2A current
- Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
- See more on Amazon...
Brand: Envistia | Manufacturer: Envistia Mall
Weight: 16.00 Grams
See On Amazon #18
3Pcs TB6600 4A Stepper Motor Driver 9-42V Stepper Motor Driver CNC Controller Nema tb6600 Single Axes Hybrid Stepper Motor for CNC Engraving Machine
Asin: B09Y1HVD47 | Model: 13427-1 | PartNumber: 13427-1 | Ean: 0701715531833 | UPC: 701715531833
Stepper Motor Driver Not Only With Large Area Heat Sink And Automatic Semi-Flow To Reduce Heat But Also With Overheat Circuit Protection.
Tb6600 Cnc Controller Support Interface Adopts High-Speed Optocoupler Isolation Also Protection For Overheat, Overcurrent, Undervoltage Lockout, Input Voltage Protection Against Reversal, Etc. Safer..
Tb6600 Suitable For Any Small-And-Medium Automatic Equipment With Cnc Controller, Such As X-Y-Z Tables, Labeling Machines, Laser Cutters, Engraving Machines, And Pick-Place Devices..
Tb6600 Support Set 7 Kinds Of Subdivisions (1/2A/2B/4/8/16/32) Through 6-Bit Dip Switch, And 8 Gear Output Current (0.5A/1.0A/1.5A/2.0A/2.5A/2.8A/3.0A/3.5A).
Features
- Stepper motor driver TB6600 current and voltage: output current: 0.5A-4.0A, the maximum output current is 4.0A; input voltage: 9-42VDC, external signal 3.3-24V can be connected directly without series resistor
- TB6600 support set 7 kinds of subdivisions (1/2A/2B/4/8/16/32) through 6-bit DIP switch, and 8 gear output current (0.5A/1.0A/1.5A/2.0A/2.5A/2.8A/3.0A/3.5A)
- Stepper motor driver not only with large area heat sink and automatic semi-flow to reduce heat but also with overheat circuit protection
- TB6600 suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
- TB6600 CNC Controller support interface adopts high-speed optocoupler isolation also protection for overheat, overcurrent, undervoltage lockout, input voltage protection against reversal, etc. Safer.
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
See On Amazon #19
Bolsen 5pcs/lot Reprap Stepper Driver pololu A4988 Stepper Motor Driver Module with Aluminum Heat Sink for ramps 1.4 3D Printer
Asin: B07G15Z31B | Ean: 8846977555691
Brand: Bolsen | Manufacturer: Bolsen
See On Amazon #20
NOYITO EasyDriver Shield Stepper Motor Driver V44 A3967 A3967SLBT (Pack of 2)
Asin: B07FZXLC4D | Model: NOA3967SLBT | PartNumber: NOA3967SLBT | Ean: 0667797751913 | UPC: 667797751913
Power Supply Range: 7V To 30V.
Compatibility: 4, 6 And 8 Wire Stepper Motors Of Any Voltage.
Size Of The Stepper Motor Driver: 1.89× 0.79× 0.35Inches.
This Driver Board Is Subdivided Into 8 Subdivisions, Which Is To Subdivide Each Step Of The Motor Into 8 Small Steps, Which Can Get More Precise Control, Which Means That Easydriver Needs 1600 Steps To Complete A Complete 360 Degree Rotation..
Features
- Stepper motors are usually defined with step angle or step parameters. The general motor is divided into 200 steps, that is, the step angle is 1.8 degrees. EasyDriver has stepping function.
- This driver board is subdivided into 8 subdivisions, which is to subdivide each step of the motor into 8 small steps, which can get more precise control, which means that EasyDriver needs 1600 steps to complete a complete 360 degree rotation.
- Power Supply Range: 7V to 30V
- Size of the Stepper Motor Driver: 1.89 0.79 0.35inches
- Compatibility: 4, 6 and 8 wire stepper motors of any voltage
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.41 x 1.89 x 0.81 inches | Weight: 0.02 Pounds
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon
Looking For Something Else?
Search