Stylebest Assembled Extruder Hot End Kit 0.4mm Nozzle 3D Printer Aluminum Heating Block
Asin: B0D2JFN4DD | Model: Stylebestxz38gte2ky | PartNumber: Stylebestxz38gte2ky
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.12V Version With 40W Red Heat Tube. Use It With Heat Sink Or Cooled Metal Base To Enhance Heat Dissipation..
Comes Fully Assembled And You Can Replace Your Old 3D Printer Extruder Parts Directly.
Plenty Of Nozzles Compatible With This Hot End Which Means Nozzle Replacement Is Easy.
Pre‑Wired White Color Thermistor Is Connected To The Updated Heater Block.
Features
- Stainless steel updated throat tube for trouble fre e, low friction print, much solid quality
- Pre wired white color thermistor is connected to the updated heater block
- 12V version with 40W red heat tube. Use it with heat sink or cooled metal base to enhance heat dissipation.
- Plenty of nozzles compatible with this hot end which means nozzle replacement is easy
- Comes fully assembled and you can replace your old 3D printer extruder parts directly
- See more on Amazon...
Brand: Stylebest | Manufacturer: Stylebest
See On Amazon Similar To Stylebest Assembled Extruder Hot End
#1
Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover 3, 0.4mm Ender 3 Nozzle 3 and 2 Pair Pneumatic Couplers
Asin: B082PGCF2B | Model: ENDER3-PT | PartNumber: ENDER3-PT
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w..
With More Terminal Housing And Pins As Spare Parts, In Case Fail Installation And Waste..
Original Capricorn Xs Serious Bowden Ptfe Tubing With Lowest Friction On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- It's 100% Creality Original Upgrade Assembled Extruder Hotend.
- Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- With more terminal housing and pins as spare parts, in case fail installation and waste.
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Weight: 0.30 pounds
See On Amazon #2
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #3
Ender 3 Hotend, Authentic Creality Assembled Hotend Kit 3D Printer Parts with 5X 0.4mm Nozzles for Ender 3 Ender 3 V2 and Ender 3 Pro
Asin: B082XXRT78 | Model: Sprinkler Kit -01 | PartNumber: Sprinkler Kit -01 | Ean: 8711459631234
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V 40W. Tip Of The Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon)..
Silicone Cover Is Provided To Help Keep Temperatures On The Hotend Much More Stable And This Will Result In Higher Print Quality And Consistency..
Five 0.4Mm Brass Nozzle Are Included In This Hotend Kit. This Kit Can Work With Different Sizes Of Mk8 Nozzle: 0.2Mm/0.3Mm/0.4Mm/0.5Mm /0.6Mm/0.8Mm/1.0Mm..
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Features
- Compatibility: 100% Creality Original. This assembled hotend kit from Creality is a plug and play replacement for Ender 3/ Ender 3 V2 /Ender 3 Pro/ Ender 3S.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- MK8 extruder hot end kit, white wire was temperature thermistor, braided wire was heating tube 24V 40W. Tip of the nozzle, aluminum heating block, throat pipe (built-in teflon).
- Five 0.4mm brass nozzle are included in this hotend kit. This kit can work with different sizes of MK8 nozzle: 0.2mm/0.3mm/0.4mm/0.5mm /0.6mm/0.8mm/1.0mm.
- Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
- See more on Amazon...
Brand: ORTHLAND | Manufacturer: Orthland
See On Amazon #4
HICTOP Ender 3 Hotend Ender 3 Pro Hotend 24V 40W Full Assembled Extruder Kit Accessories with Silicone Cover for Ender 3, Ender 3 Pro 3D Printer
Asin: B08R77QLS1 | Model: extruder kit-ender 3 | PartNumber: extruder kit-ender 3 | Ean: 0649910011463 | UPC: 649910011463
3 There Are 2 Fans, Fan Covers, Heat Block, Cooling Block, Nozzle, Throat Pipe, Connector, Teflon Pipe, Thermistor Sensor, Heating Tube, Screws, Silicone Cover, Etc..
5. Silicone Cover Is Provided To Help Keep Temperatures On The Ender 3 Hotend Much More Stable And This Will Result In Higher Print Quality And Consistency.
4 24V High Speed Fan, Lose Heat Quickly And Efficiently; Nozzle And Tube Connect Seamless, Prevent Material Leaking And Blocking..
2 Compatible With Ender 3, Ender 3 Pro And Similar 3D Printer But Not For Ender 3 Neo..
Features
- 1 Ender 3 hotend, Plug and Play Ender 3 Pro Hotend, you do not need to cut it.
- 2 Compatible with Ender 3, Ender 3 Pro and similar 3D printer but not for ender 3 Neo.
- 3 There are 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, thermistor sensor, heating tube, screws, silicone cover, etc.
- 4 24V high speed fan, lose heat quickly and efficiently; nozzle and tube connect seamless, prevent material leaking and blocking.
- 5. Silicone Cover is provided to help keep temperatures on the Ender 3 hotend much more stable and this will result in higher print quality and consistency
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
Dimensions: 3.15 x 5.50 x 4.69 inches | Weight: 0.37 pounds
See On Amazon #5
Creality Original Ender 3 Full Assembled Hotend Set, Replacement Full Assemble Hotend Kit with Mental Shell and Dual Fan for Ender 3 / Ender 3S/ Ender 3 Pro
Asin: B0C85CPXS7
【Easy Installation】The Kit Is Assembled Before Delivery, Which Means It's Quite Easy To Install Even If You Are A Beginner Of 3D Printing. You Can According The Video On The Product Page To Install It..
【After Sales Service】Creality Pays Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【High Quality Silicone Case】The Non-Stick Silicone Cover Keeps The Hotend Temperature Extremely Stable And What's More, The Extruder Looks Clean And Tidy..
【Effective Heating And Cooling System】 It Has Heating Block And Heat Sink And Dual Fan For Cooling. The Heating Block With Insulating Silicone Cover Keeps The Temperature Stable And Ensures Even Printing. The Design With Two Fans Makes Heat Dissipation More Even, Solidifies The Model Quickly And Ensures Precise Printing.
Features
- Quality Assurance The Ender 3 hotend extruder kit and accessories are all original and high quality from 100% quality assurance. Suitable for Creality Ender 3 / Ender 3S/ Ender 3 Pro
- Effective heating and cooling system It has heating block and heat sink and dual fan for cooling. The heating block with insulating silicone cover keeps the temperature stable and ensures even printing. The design with two fans makes heat dissipation more even, solidifies the model quickly and ensures precise printing
- Easy Installation The kit is assembled before delivery, which means it's quite easy to install even if you are a beginner of 3D printing. You can according the video on the product page to install it.
- High Quality Silicone Case The non-stick silicone cover keeps the hotend temperature extremely stable and what's more, the extruder looks clean and tidy.
- After Sales Service Creality pays great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #6
3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles
Asin: B07H8TSM95 | Model: Ender 3-Extruder | PartNumber: Ender 3-Extruder | Ean: 0608410981676 | UPC: 608410981676
Ender 3 Extruder Hot End Can Work With Different Size Mk8 Nozzle: 0.2Mm 0.3Mm 0.4Mm 0.5Mm 0.6Mm 0.8Mm 1.0Mm Nozzle.
Tip Of Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon).
Mk8 Extruder Hot End Kits,White Wire Was Temperature Thermistor, Black Wire Was Heating Tube 24V 40W.
5 Pieces 0.4Mm 3D Printers Nozzles As Gift..
Features
- ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT.
- 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT.
- ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
- MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W
- TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)
- See more on Amazon...
Brand: RICHOOSE | Manufacturer: Creality 3D
See On Amazon #7
Creality Ender 5 Plus Hotend Replacement, Ender 5 Pro Hotend, Ender 5 Plus Hot End Assembled 24V with Aluminum Heating Block 0.4mm Nozzle for 3D Printer Ender-5 Plus, Ender 5 Pro, Ender 5-1.4M Wire
Asin: B0C5CKHVY7
This Creality Ender 5 Hot End Replaced The Original Perfectly, The Hot End Was Easy To Get Operational With Minimum Soldering..
Superior Performance: With High Quality Teflon Tube, Reduce Clogging, Smooth Filament Feeding, Rapid Heating, Precise Temperature Contral..
Seamless Connected Between Nozzle And Throat, Upgraded Interior Design, No More Clogging With Long Time Printing..
Ender 5 Plus Hot End, White Wire Was Temperature Thermistor, Red Wire Was Heating Tube 24V 40W..
Features
- Compatible with Creality ender 5 plus 3d printer. Operating temperature range: -40 ~ +260 C (-40 ~ +500 F)
- ender 5 plus hot end, white wire was temperature thermistor, red wire was heating tube 24V 40W.
- This creality ender 5 hot end replaced the original perfectly, the hot end was easy to get operational with minimum soldering.
- Seamless connected between nozzle and throat, upgraded interior design, no more clogging with long time printing.
- Superior performance: With high quality teflon tube, reduce clogging, smooth filament feeding, rapid heating, precise temperature contral.
- See more on Amazon...
Brand: CHPOWER | Manufacturer: CHPOWER
See On Amazon #8
Creality 3D Upgrade Ender 3 Hotend Kit, 24V Assembled Extruder Hot End Kit with Capricorn Bowden PTFE Tubing 3D Printer Accessories for Ender-3S/Ender-3 Pro/Ender-2 Pro 3D Printer
Asin: B0C8HRCSCP
【Easy Installation】The Heating Tube And Temperature Thermistor Come Out Of The Control Box And Connect With The Terminal Shell And Pins. You Can Then Insert The Hotend Kit, Which Makes It Easier To Replace The Hotend Kit. Mk8 Extruder Hotend Kit, White Wire Is Temperature Thermistor, Braided Wire Is Heating Tube 24V 40W, Heating Block + Cooling Block, To Ensure Stable Printing Temperature And Efficient And Reliable Printing..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Perfect And Durable】Capricorn Ptfe Tube Is Manufactured According To The Highest Specification Of 1.75Mm Filament. The Silicone Cover Helps To Keep The Hot End Temperature More Stable, Keep The Print Head Clean, And Prevent The Filament From Sticking To The Heating Block Or Nozzle..
【Upgrade Teflon Tube】Capricorn Ptfe Tube 1.75Mm Is Far Superior To The White Ptfe Tube That Comes With Any 3D Printer, Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage..
Features
- Quality Assurance 100% official high performance and precision assembled 24V 40W hotend kit, suitable for Ender 3, Ender 3 Pro, Ender 3S and Ender 2 Pro 3d printer upgrade units. The hotend extruder kit and accessories are all original and high quality from 100% quality assurance.
- Upgrade Teflon Tube Capricorn ptfe tube 1.75mm is far superior to the white ptfe tube that comes with any 3D printer, less friction means more responsiveness, less retraction, more accurate prints, less slippage.
- Easy Installation The heating tube and temperature thermistor come out of the control box and connect with the terminal shell and pins. You can then insert the hotend kit, which makes it easier to replace the hotend kit. MK8 extruder hotend kit, white wire is temperature thermistor, braided wire is heating tube 24V 40W, heating block + cooling block, to ensure stable printing temperature and efficient and reliable printing.
- Perfect and Durable Capricorn PTFE tube is manufactured according to the highest specification of 1.75mm filament. The silicone cover helps to keep the hot end temperature more stable, keep the print head clean, and prevent the filament from sticking to the heating block or nozzle.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #9
Creality Ender 5 S1 Extruder Hotend Kit Replacement High Temperature High Speed Complete Nozzle Hot End Kit
Asin: B0BXDDGMKZ | Model: ENO-CR-Ender5S1-Hotend | PartNumber: ENO-CR-Ender5S1-Hotend
【Corrugated Heatsink】2.5 Times Surface Area That Is Rapidly Air-Cooled By A Silent Axial Flow Fan..
Easy To Install！.
【Large Melting Chamber】50Mm³ Melting Chamber Surrounded By A Large 4000Mm³ Heater Block. It Fully Melts The Filament For Smooth Feeding..
【Titanium Alloy Heatbreak】Low Thermal Conductivity For Blocking Heat Creep. Able To Tame Up To 300℃..
Features
- Official Creality Ender 5 S1 Stock Hotend Kit Clog-free hot end for High-temp High-Speed Printing!
- Titanium Alloy Heatbreak Low thermal conductivity for blocking heat creep. Able to tame up to 300 .
- Corrugated Heatsink 2.5 times surface area that is rapidly air-cooled by a silent axial flow fan.
- Large Melting Chamber 50mm melting chamber surrounded by a large 4000mm heater block. It fully melts the filament for smooth feeding.
- Easy to Install
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #10
Creativity CR10 Hotend Assembled MK8 Extruder Kit Full Set (with 0.4MM Nozzles) Upgrade for 3D Printer CR 10/CR 10S/S4/S5 Replacement Parts
Asin: B09ZQFZTB3 | Model: CR10-Fan-Kit | PartNumber: CR10-Fan-Kit | Ean: 8686254965603
Fast Heating And Heat Dissipation: Heating Block + Heatsink + Fan, Fficient Heating And Heat Dissipation, Greatly Improved Printing Success Rate. Fan Cooling Applied, Even Heat Dissipation, More Stable Printing..
Thermistor And Heating Tube: High Quality Thermistor And Heating Tube Are Up To 260℃,With Rapid-Risen Temperature, Precise Temperature Control And Good Stability..
Applicable Models: This 12V Full Hotend Kit Is Compatible With Cr 10/Cr 10 Mini/Cr 10S/Cr 10 S4/Cr 10 S5 Fdm 3D Printers..
Fluent Printing Without String: Independently Developed Brass Nozzle Has Bullet Structure, Which Improves Uniform Heating To Reduce Clogging And String..
Features
- Easy to Install: Easy for the CR10 hotend to Assemble, packed whole extruder kit, just fix it on X axis and connect to control box, it will work.
- Fluent Printing Without String: Independently developed brass nozzle has bullet structure, which improves uniform heating to reduce clogging and string.
- Fast Heating and Heat Dissipation: Heating block + heatsink + fan, fficient heating and heat dissipation, greatly improved printing success rate. Fan cooling applied, even heat dissipation, more stable printing.
- Applicable Models: This 12V full hotend kit is compatible with CR 10/CR 10 Mini/CR 10S/CR 10 S4/CR 10 S5 FDM 3d printers.
- Thermistor and Heating Tube: High quality thermistor and heating tube are up to 260 ,with rapid-risen temperature, precise temperature control and good stability.
- See more on Amazon...
Brand: Creativity | Manufacturer: Creativity
See On Amazon #11
Creality Original Ender 5 Hotend Kit for 24V Ender-5 3D Printer Extruder Head with Silicone Cover Aluminum Heat Block Assembled
Asin: B07WRKJG9N | Ean: 0705300791480 | UPC: 705300791480
Operating Temperature Range： -40 ~ +260°C (-40 ~ +500 °F).
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Red Wire Was Heating Tube 24V 40W..
Suitable For Creality Ender 5 3D Printer..
Features
- It's 100% Creality Original.
- Suitable for Creality Ender 5 3d printer.
- Operating temperature range -40 ~ +260 C (-40 ~ +500 F)
- MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 24V 40W.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #12
Creality Original Ender 5 Hotend Assembled with Fan for Ender-5 and Ender-5 Pro 3D Printer Extruder Head with Silicone Cover Aluminum Heat Block, 24V
Asin: B09WZZCS2T | Model: ender-5 hotend | PartNumber: ender-5 hotend
This Creality Ender 5 Hot End Replaced The Original Perfectly, The Ender 5 Pro Hot End Was Easy To Get Operational With Minimum Soldering..
Superior Performance: Ender 5 Pro Hotend Is With High Quality Teflon Tube, Reduce Clogging, Smooth Filament Feeding, Rapid Heating, Precise Temperature Contral..
Seamless Connected Between Nozzle And Throat, Upgraded Interior Design, No More Clogging With Long Time Printing..
Compatible With Creality Ender-5 3D Printer. Operating Temperature Range: -40 ~ +260°C (-40 ~ +500 °F) Ender 5 Hotend, White Wire Was Temperature Thermistor, Red Wire Was Heating Tube 24V 40W..
Features
- If you find that the wiring does not match your printer after receiving the hotend, please follow the wiring in image 2 to operate. If you have any questions, please contact our after-sales service. We are always here to assist you.
- Compatible with Creality Ender-5 3d printer. Operating temperature range: -40 ~ +260 C (-40 ~ +500 F) Ender 5 hotend, white wire was temperature thermistor, red wire was heating tube 24V 40W.
- This creality ender 5 hot end replaced the original perfectly, the ender 5 pro hot end was easy to get operational with minimum soldering.
- Seamless connected between nozzle and throat, upgraded interior design, no more clogging with long time printing.
- Superior performance: Ender 5 pro hotend is with high quality teflon tube, reduce clogging, smooth filament feeding, rapid heating, precise temperature contral.
- See more on Amazon...
Brand: CHPOWER | Manufacturer: CHPOWER
See On Amazon #13
Metal Hotend 3D Printer Nozzles 3 Pcs 3D Printer Hotend Kit Metal Hotend Kit 3D Assembled Extruder Compatible with CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers
Asin: B09LCKKZDW | Model: Flutesan-Hotend Kit-07 | PartNumber: Flutesan-Hotend Kit-07
Consistent Output: Following The Manufacturing Standards, This Metal Hotend Can Effectively Reduce The Risks Of Clogging And Uneven Extrusion, Providing Consistent Outputs And Avoiding Frequent Replacement Of Ptfe Tubes, Thereby Reducing Maintenance Workload.
Note: The Metal Hotend Extruder Kit Does Not Contain Heating Elements, But We Do Reserve Installation Positions For The Heating Elements, So You Can Configure Heating Elements With Different Powers According To Your Actual Needs.
Universal Compatibility: This 3D Assembled Metal Hotend Kit Is Compatible With Most Series Of Creality Ender And Cr Printers; And It Is Preassembled, Which Makes It Easy For You To Install.
Reliable Quality: Made Of Quality Metal Materials, This Metal Hotend Kit Is Safe And Reliable, Which Can Withstand Higher Temperatures, Allowing You To Print Filaments With High Temperature Requirements At Will After Replacement, Such As Abs, Nylon, Polycarbonate And More.
Features
- High precision: this 3D printer hotend kit adopts a quality cooling system, the aluminum shell anodized frosted surface makes it more sturdy and wear resistant, which can serve you for a long time; And the integrated structure allows you to disassemble, repair and assemble it easily
- Reliable quality: made of quality metal materials, this metal hotend kit is safe and reliable, which can withstand higher temperatures, allowing you to print filaments with high temperature requirements at will after replacement, such as ABS, nylon, polycarbonate and more
- Consistent output: following the manufacturing standards, this metal hotend can effectively reduce the risks of clogging and uneven extrusion, providing consistent outputs and avoiding frequent replacement of PTFE tubes, thereby reducing maintenance workload
- Universal compatibility: this 3D assembled metal hotend kit is compatible with most series of Creality Ender and CR printers; And it is preassembled, which makes it easy for you to install
- Note: the metal hotend extruder kit does not contain heating elements, but we do reserve installation positions for the heating elements, so you can configure heating elements with different powers according to your actual needs
- See more on Amazon...
Brand: Flutesan | Manufacturer: Flutesan
See On Amazon #14
Creality Ender 5 Plus Full Hotend Kit, Original Fully Assembled Extruder MK8 Hot End Kit with Aluminum Heating Block 0.4mm Nozzle Teflon Tube for 3D Printer Ender-5 Plus/Ender 5 Pro/Ender 5
Asin: B094RH38WK
【Efficient Heating And Cooling 】--Heating Block+Cooling Block+Fan, Nice Temperature Control Uniform And Reliable Printing..
【Superior Performance】--With High Quality Teflon Tube, Educe Clogging, Smooth Filament Feeding, Special Design Thermistor And Heating Tube, Rapid Heating, Precise Temperature Contral, Detection Temperature Up To 260℃. Seamless Connected Between Nozzle And Throat, Upgraded Interior Design, No More Clogging With Long Time Printing..
【Newly Upgraded Throat Tube 】--With Ultra-Thin 0.35Mm Thickness, It Reduces The Heat Loss Of The Heating Block And Enhances The Working Stability Of The Nozzle..
【Delicate Nozzle 】--Independently Developed Brass Nozzle, Bullet Shape Structure, Better Uniform Heating, Less Wire Drawing And Clogging Problems..
Features
- Integrated Desin --Integrated structure design, simple wire connection, one step installation. All metal case, frosted texture, firmer and wear resistance.
- Delicate Nozzle --Independently developed brass nozzle, bullet shape structure, better uniform heating, less wire drawing and clogging problems.
- Efficient Heating and Cooling --Heating block+cooling block+fan, nice temperature control uniform and reliable printing.
- Newly Upgraded Throat Tube --With ultra-thin 0.35mm thickness, it reduces the heat loss of the heating block and enhances the working stability of the nozzle.
- Superior performance --With high quality teflon tube, educe clogging, smooth filament feeding, special design thermistor and heating tube, rapid heating, precise temperature contral, detection temperature up to 260 . Seamless connected between nozzle and throat, upgraded interior design, no more clogging with long time printing.
- See more on Amazon...
Brand: KOYOFEI | Manufacturer: KOYOFEI
Weight: 0.64 Pounds
See On Amazon #15
MK8 Hot End Extruder Nozzle Kit 0.4mm for 3D Printer,Assembled Extruder Brass Kits 1.75mm,30mm A8 Throat Tubing Aluminum Heater Block for RapRep i3 Anet A2 A8 3D Printer Part Replacement
Asin: B0894GW1R9 | Model: D13532-1 | PartNumber: D13532-1 | Ean: 0701715433960 | UPC: 701715433960
30Mm Length Extruder 1.75Mm Tube, Made From Stainless Steel ,Compatible With 1.75Mm Pla Abs 3D Printer, Reduces Extrusion Force And Improve Reliability Of Retractions Thanks To The Improved Internal Surface Finish.
You Can Repair Your Extruder With This Kit Instead Of Replacing A New One When Your Extruder Suffers A Clog That Can't Be Fixed. A Great Replacement Hot End For Mk8, I3, E3d, Anet A8, Alunar M508, Cr7, V2 Etc.
Heater Block: Aluminium Material Heater Block, 2Cm X 2Cm X 1Cm, Comes With A Necessary M6d Screw. Working Perfectly With Abs And Pla Filaments.
Nozzle: 0.4Mm Extruder Brass Nozzle Print Head, Compatible With 1.75Mm Pla Abs 3D Printer.
Features
- Heated Tubing :12V/40W high temperature resistance heater (wire length 1M/39.4inches), operating temperature range:0~+280 C (0~+538 F)
- Nozzle: 0.4mm Extruder Brass Nozzle Print Head, Compatible with 1.75mm PLA ABS 3D printer
- 30mm Length Extruder 1.75mm Tube, made from stainless steel ,compatible with 1.75mm PLA ABS 3D printer, reduces extrusion force and improve reliability of retractions thanks to the improved internal surface finish
- Heater block: Aluminium Material heater block, 2cm X 2cm X 1cm, comes with a necessary M6d screw. Working perfectly with ABS and PLA filaments
- You can repair your extruder with this kit instead of replacing a new one when your extruder suffers a clog that can't be fixed. A great replacement hot end for MK8, i3, E3D, Anet A8, Alunar M508, CR7, V2 etc
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #16
Creality Original Extruder Assembled MK8 Hotend Kit Full Set Upgrade with Low Friction Capricorn Tubing for 3D Printer CR-7 CR-8 CR-10S S4 S5
Asin: B07WSQJ41K | Model: ENO-CR10-Full-Hotend-Bluetube | PartNumber: ENO-CR10-Full-Hotend-Bluetube | Ean: 0705300791510 | UPC: 705300791510
Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Capricorn Original Ptfe Tubing 63Cm..
Features
- It's 100% Creality Original.
- Upgrade with Low Friction Capricorn Original PTFE Tubing 63CM.
- Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #17
Creality Ender 3 V2 3D Printer Extruder Assembled MK8 Hot End Kit Ender 3 hotend Replacement for Ender 3/Ender 3 Pro/Ender 3 V2 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle
Asin: B07FTMSCSN | Model: Ender 3-Hotend | PartNumber: Ender 3-Hotend | Ean: 0667797511579 | UPC: 667797511579
Mk8 Extruder Hot End Kit, White Wire Is Temperature Thermistor, Red Wire Is Heating Tube 24V 40W.
Suitable For Creality Ender 3.
Tip Of The Nozzle, Aluminum Heating Block, Throat Pipe.
Work With Different Sizes Of Mk8 Nozzle: 0.2Mm 0.3Mm 0.4Mm 0.5Mm 0.6Mm 0.8Mm 1.0Mm Nozzle.
Features
- 100% original and high quality 3D Printer accessories for Creality Ender 3
- Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
- MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W
- Tip of the nozzle, aluminum heating block, throat pipe
- Suitable For Creality ender 3
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 0.90 x 6.00 x 5.00 Inches | Weight: 0.02 Pounds
See On Amazon #18
Upgrade Ender 3 Hotend, CR-10 Hotend Assembled MK8 Extruder 3D Printer Hotend Kit 24V 40W Compatible for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5, CR10/CR-10 V2/CR-10 V3 3D Printer,
Asin: B0CPXZKHPW
This Metal Ender 3 Pro Hotend Kit Is Safe And Reliable, Which Can Withstand Higher Temperatures, Allowing You To Print Filaments With High Temperature Requirements At Will After Replacement, Such As Abs, Nylon, Polycarbonate And More..
Tips: It Is Suggested To Re-Check The 3D Printer Heatbed Level After Install The New 3D Printer Hotend Or Nozzle, To Avoid The Nozzle Scratch 3D Printer Heatbed..
24V 3D Printer Heater Wire And 100K Thermistor Wire Are With Fast Replace Plug Connectors,Easier To Fast Replace Or Remove The Hotend In Any Cases..
3D Printer Hot End Kit Compatible With 3D Printer Ender 3 / Ender 3 Pro / Ender 3X /Ender 3 V2, Ender 5, Creality Cr-10, Cr-10-S5, Cr-10-S4, Cr-10S, Cr-10 Mini, Cr-20, Cr-20 Pro Cr-10 V2/Cr-10 V3, Etc..
Features
- Package included: 1 Ender 3 Hot end Kit Upgraded, 24V 40W Assembled MK8 Extruder Hot End Kit. with NTC 3950 100K Thermistor and 24v 40w heater wire, 0.5m Teflon Tube.
- 3D Printer Hot end Kit Compatible with 3D Printer Ender 3 / Ender 3 Pro / Ender 3X /Ender 3 V2, Ender 5, Creality CR-10, CR-10-S5, CR-10-S4, CR-10S, CR-10 MINI, CR-20, CR-20 Pro CR-10 V2/CR-10 V3, etc.
- This Metal Ender 3 Pro Hotend Kit is safe and reliable, which can withstand higher temperatures, allowing you to print filaments with high temperature requirements at will after replacement, such as ABS, nylon, polycarbonate and more.
- 24V 3D Printer Heater Wire and 100K Thermistor Wire are with fast replace plug connectors,easier to fast replace or remove the hotend in any cases.
- Tips: It is suggested to re-check the 3D Printer heatbed level after install the new 3D Printer hotend or nozzle, to avoid the nozzle scratch 3D Printer heatbed.
- See more on Amazon...
Brand: TIEXYE | Manufacturer: TIEXYE
See On Amazon #19
Creality Official Ender 5 S1 Hotend Kit, High Speed High Temperature Assembled Extruder 3D Printer Hotend with Silicone Sock, 0.4mm Nozzle and Copper Throat, Silver
Asin: B0C4P3YX4F
【High Thermal Conductivity And Fast Heating】- The Advanced Thermistor And Heating Tube Assembly Can Heat Up Quickly And Capture The Temperature Of The Nozzle In Time..
【Professional Support】- To Ensure Your Pleasant Shopping Experience, Creality Has A Professional Customer Service Team To Solve Your Problems. If You Have Any Problems, Please Do Not Hesitate To Contact Us. We Will Provide Friendly And Fast Customer Service To Solve Your Problem Within 24 Hours..
【Widely Compatible For Filaments】- Ender 5 S1 Hotend Kit Suitable For Pla, Petg, Tpu, Abs, Pc, Asa, Hips, Etc..
【High-Temperature Resistance Copper Throat】- Built-In Rigid Structure To Resist High Temperatures Up To 300℃; 50Mm³ Large Melting Chamber Surrounded By A Large 4000Mm³ Heater Block, Fully Melts The Filament For Smooth Feeding..
Features
- Titanium Alloy Heatbreak - Low thermal conductivity for blocking heat creep. Able to tame up to 300 ; 2.5 times larger surface area corrugated heat sink for rapid heat dissipation with the Ender 5 S1 silent axial fan.
- High-temperature Resistance Copper Throat - Built-in rigid structure to resist high temperatures up to 300 ; 50mm large melting chamber surrounded by a large 4000mm heater block, fully melts the filament for smooth feeding.
- High thermal conductivity and fast heating - The advanced thermistor and heating tube assembly can heat up quickly and capture the temperature of the nozzle in time.
- Widely Compatible for Filaments - Ender 5 S1 hotend kit suitable for PLA, PETG, TPU, ABS, PC, ASA, HIPS, etc.
- Professional Support - To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems. If you have any problems, please do not hesitate to contact us. We will provide friendly and fast customer service to solve your problem within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #20
Extruder Hot End Kit for Neptune 4 and Neptune 4 Pro, All Metal Hot End with Nozzle and Silicone Sleeve,3D Printer Accessories Hot End Extruder Head Heating Block Kit
Asin: B0CY846Q55 | Model: HSRQ0123 海王星4挤出头 | PartNumber: HSRQ0123 海王星4挤出头
All Metal: The Kit Is Made Of High Quality Alloy Throat Which Can Withstand High Temperature Up To 300 Degree Celsius, Sturdy And Durable, Providing Stable Print Quality..
Plug And Play: Simply Replace Your Old Extruder With A New Hot End To Get Started. We Recommend Checking The Sealing Of Each Part Before Use. After Installing This Hot End Print Head Kit, We Recommend That You Readjust The Hot Bed For Optimum Performance..
Nozzle And Heat Block: Seamless Connection Between The Nozzle And The Heat Breaker, Accelerating Nozzle Heat Dissipation And Heat Breaker Insulation, Relieving Nozzle Clogging..
Package Contains 1 Hot End Replacement Kit For The Elegoo Neptune 4 Printer Series. Fully Assembled Hot End Kit Parts - Includes Brass Nozzle, Heater Block, Heat Sink, Throat, Ptfe Throat, Thermistor, Heater Rod, Open End Wrench And Silicone Cap..
Features
- Compatible 3D Printers: This assembly hot end kit is for ELEGOO Neptune 4 and Neptune 4 Pro only, not for Neptune 4 Plus and Neptune 4 Max.
- Package Contains 1 Hot End Replacement Kit For The Elegoo Neptune 4 Printer Series. Fully Assembled Hot End Kit Parts - Includes Brass Nozzle, Heater Block, Heat Sink, Throat, Ptfe Throat, Thermistor, Heater Rod, Open End Wrench And Silicone Cap.
- All Metal: The Kit Is Made Of High Quality Alloy Throat Which Can Withstand High Temperature Up To 300 Degree Celsius, Sturdy And Durable, Providing Stable Print Quality.
- Nozzle And Heat Block: Seamless Connection Between The Nozzle And The Heat Breaker, Accelerating Nozzle Heat Dissipation And Heat Breaker Insulation, Relieving Nozzle Clogging.
- Plug And Play: Simply Replace Your Old Extruder With A New Hot End To Get Started. We Recommend Checking The Sealing Of Each Part Before Use. After Installing This Hot End Print Head Kit, We Recommend That You Readjust The Hot Bed For Optimum Performance.
- See more on Amazon...
Brand: Xirbbo | Manufacturer: xirbbo
See On Amazon
Looking For Something Else?
Search